| /* cfg80211 support |
| * |
| * See copyright notice in main.c |
| */ |
| #include <linux/ieee80211.h> |
| #include <net/cfg80211.h> |
| #include "hw.h" |
| #include "main.h" |
| #include "orinoco.h" |
| |
| #include "cfg.h" |
| |
| /* Supported bitrates. Must agree with hw.c */ |
| static struct ieee80211_rate orinoco_rates[] = { |
| { .bitrate = 10 }, |
| { .bitrate = 20 }, |
| { .bitrate = 55 }, |
| { .bitrate = 110 }, |
| }; |
| |
| static const void * const orinoco_wiphy_privid = &orinoco_wiphy_privid; |
| |
| /* Called after orinoco_private is allocated. */ |
| void orinoco_wiphy_init(struct wiphy *wiphy) |
| { |
| struct orinoco_private *priv = wiphy_priv(wiphy); |
| |
| wiphy->privid = orinoco_wiphy_privid; |
| |
| set_wiphy_dev(wiphy, priv->dev); |
| } |
| |
| /* Called after firmware is initialised */ |
| int orinoco_wiphy_register(struct wiphy *wiphy) |
| { |
| struct orinoco_private *priv = wiphy_priv(wiphy); |
| int i, channels = 0; |
| |
| if (priv->firmware_type == FIRMWARE_TYPE_AGERE) |
| wiphy->max_scan_ssids = 1; |
| else |
| wiphy->max_scan_ssids = 0; |
| |
| wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); |
| |
| /* TODO: should we set if we only have demo ad-hoc? |
| * (priv->has_port3) |
| */ |
| if (priv->has_ibss) |
| wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC); |
| |
| if (!priv->broken_monitor || force_monitor) |
| wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR); |
| |
| priv->band.bitrates = orinoco_rates; |
| priv->band.n_bitrates = ARRAY_SIZE(orinoco_rates); |
| |
| /* Only support channels allowed by the card EEPROM */ |
| for (i = 0; i < NUM_CHANNELS; i++) { |
| if (priv->channel_mask & (1 << i)) { |
| priv->channels[i].center_freq = |
| ieee80211_dsss_chan_to_freq(i+1); |
| channels++; |
| } |
| } |
| priv->band.channels = priv->channels; |
| priv->band.n_channels = channels; |
| |
| wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band; |
| wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM; |
| |
| i = 0; |
| if (priv->has_wep) { |
| priv->cipher_suites[i] = WLAN_CIPHER_SUITE_WEP40; |
| i++; |
| |
| if (priv->has_big_wep) { |
| priv->cipher_suites[i] = WLAN_CIPHER_SUITE_WEP104; |
| i++; |
| } |
| } |
| if (priv->has_wpa) { |
| priv->cipher_suites[i] = WLAN_CIPHER_SUITE_TKIP; |
| i++; |
| } |
| wiphy->cipher_suites = priv->cipher_suites; |
| wiphy->n_cipher_suites = i; |
| |
| wiphy->rts_threshold = priv->rts_thresh; |
| if (!priv->has_mwo) |
| wiphy->frag_threshold = priv->frag_thresh + 1; |
| wiphy->retry_short = priv->short_retry_limit; |
| wiphy->retry_long = priv->long_retry_limit; |
| |
| return wiphy_register(wiphy); |
| } |
| |
| static int orinoco_change_vif(struct wiphy *wiphy, struct net_device *dev, |
| enum nl80211_iftype type, u32 *flags, |
| struct vif_params *params) |
| { |
| struct orinoco_private *priv = wiphy_priv(wiphy); |
| int err = 0; |
| unsigned long lock; |
| |
| if (orinoco_lock(priv, &lock) != 0) |
| return -EBUSY; |
| |
| switch (type) { |
| case NL80211_IFTYPE_ADHOC: |
| if (!priv->has_ibss && !priv->has_port3) |
| err = -EINVAL; |
| break; |
| |
| case NL80211_IFTYPE_STATION: |
| break; |
| |
| case NL80211_IFTYPE_MONITOR: |
| if (priv->broken_monitor && !force_monitor) { |
| wiphy_warn(wiphy, |
| "Monitor mode support is buggy in this firmware, not enabling\n"); |
| err = -EINVAL; |
| } |
| break; |
| |
| default: |
| err = -EINVAL; |
| } |
| |
| if (!err) { |
| priv->iw_mode = type; |
| set_port_type(priv); |
| err = orinoco_commit(priv); |
| } |
| |
| orinoco_unlock(priv, &lock); |
| |
| return err; |
| } |
| |
| static int orinoco_scan(struct wiphy *wiphy, struct net_device *dev, |
| struct cfg80211_scan_request *request) |
| { |
| struct orinoco_private *priv = wiphy_priv(wiphy); |
| int err; |
| |
| if (!request) |
| return -EINVAL; |
| |
| if (priv->scan_request && priv->scan_request != request) |
| return -EBUSY; |
| |
| priv->scan_request = request; |
| |
| err = orinoco_hw_trigger_scan(priv, request->ssids); |
| |
| return err; |
| } |
| |
| static int orinoco_set_channel(struct wiphy *wiphy, |
| struct net_device *netdev, |
| struct ieee80211_channel *chan, |
| enum nl80211_channel_type channel_type) |
| { |
| struct orinoco_private *priv = wiphy_priv(wiphy); |
| int err = 0; |
| unsigned long flags; |
| int channel; |
| |
| if (!chan) |
| return -EINVAL; |
| |
| if (channel_type != NL80211_CHAN_NO_HT) |
| return -EINVAL; |
| |
| if (chan->band != IEEE80211_BAND_2GHZ) |
| return -EINVAL; |
| |
| channel = ieee80211_freq_to_dsss_chan(chan->center_freq); |
| |
| if ((channel < 1) || (channel > NUM_CHANNELS) || |
| !(priv->channel_mask & (1 << (channel-1)))) |
| return -EINVAL; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| priv->channel = channel; |
| if (priv->iw_mode == NL80211_IFTYPE_MONITOR) { |
| /* Fast channel change - no commit if successful */ |
| hermes_t *hw = &priv->hw; |
| err = hw->ops->cmd_wait(hw, HERMES_CMD_TEST | |
| HERMES_TEST_SET_CHANNEL, |
| channel, NULL); |
| } |
| orinoco_unlock(priv, &flags); |
| |
| return err; |
| } |
| |
| static int orinoco_set_wiphy_params(struct wiphy *wiphy, u32 changed) |
| { |
| struct orinoco_private *priv = wiphy_priv(wiphy); |
| int frag_value = -1; |
| int rts_value = -1; |
| int err = 0; |
| |
| if (changed & WIPHY_PARAM_RETRY_SHORT) { |
| /* Setting short retry not supported */ |
| err = -EINVAL; |
| } |
| |
| if (changed & WIPHY_PARAM_RETRY_LONG) { |
| /* Setting long retry not supported */ |
| err = -EINVAL; |
| } |
| |
| if (changed & WIPHY_PARAM_FRAG_THRESHOLD) { |
| /* Set fragmentation */ |
| if (priv->has_mwo) { |
| if (wiphy->frag_threshold < 0) |
| frag_value = 0; |
| else { |
| printk(KERN_WARNING "%s: Fixed fragmentation " |
| "is not supported on this firmware. " |
| "Using MWO robust instead.\n", |
| priv->ndev->name); |
| frag_value = 1; |
| } |
| } else { |
| if (wiphy->frag_threshold < 0) |
| frag_value = 2346; |
| else if ((wiphy->frag_threshold < 257) || |
| (wiphy->frag_threshold > 2347)) |
| err = -EINVAL; |
| else |
| /* cfg80211 value is 257-2347 (odd only) |
| * orinoco rid has range 256-2346 (even only) */ |
| frag_value = wiphy->frag_threshold & ~0x1; |
| } |
| } |
| |
| if (changed & WIPHY_PARAM_RTS_THRESHOLD) { |
| /* Set RTS. |
| * |
| * Prism documentation suggests default of 2432, |
| * and a range of 0-3000. |
| * |
| * Current implementation uses 2347 as the default and |
| * the upper limit. |
| */ |
| |
| if (wiphy->rts_threshold < 0) |
| rts_value = 2347; |
| else if (wiphy->rts_threshold > 2347) |
| err = -EINVAL; |
| else |
| rts_value = wiphy->rts_threshold; |
| } |
| |
| if (!err) { |
| unsigned long flags; |
| |
| if (orinoco_lock(priv, &flags) != 0) |
| return -EBUSY; |
| |
| if (frag_value >= 0) { |
| if (priv->has_mwo) |
| priv->mwo_robust = frag_value; |
| else |
| priv->frag_thresh = frag_value; |
| } |
| if (rts_value >= 0) |
| priv->rts_thresh = rts_value; |
| |
| err = orinoco_commit(priv); |
| |
| orinoco_unlock(priv, &flags); |
| } |
| |
| return err; |
| } |
| |
| const struct cfg80211_ops orinoco_cfg_ops = { |
| .change_virtual_intf = orinoco_change_vif, |
| .set_channel = orinoco_set_channel, |
| .scan = orinoco_scan, |
| .set_wiphy_params = orinoco_set_wiphy_params, |
| }; |