| /* |
| * Copyright 2002-2005, Instant802 Networks, Inc. |
| * Copyright 2005, Devicescape Software, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/netdevice.h> |
| #include <linux/types.h> |
| #include <linux/slab.h> |
| #include <linux/skbuff.h> |
| #include <linux/compiler.h> |
| |
| #include <net/mac80211.h> |
| #include "ieee80211_i.h" |
| #include "ieee80211_rate.h" |
| #include "debugfs.h" |
| |
| |
| /* This is a minimal implementation of TX rate controlling that can be used |
| * as the default when no improved mechanisms are available. */ |
| |
| |
| #define RATE_CONTROL_EMERG_DEC 2 |
| #define RATE_CONTROL_INTERVAL (HZ / 20) |
| #define RATE_CONTROL_MIN_TX 10 |
| |
| MODULE_ALIAS("rc80211_default"); |
| |
| static void rate_control_rate_inc(struct ieee80211_local *local, |
| struct sta_info *sta) |
| { |
| struct ieee80211_sub_if_data *sdata; |
| struct ieee80211_hw_mode *mode; |
| int i = sta->txrate; |
| int maxrate; |
| |
| sdata = IEEE80211_DEV_TO_SUB_IF(sta->dev); |
| if (sdata->bss && sdata->bss->force_unicast_rateidx > -1) { |
| /* forced unicast rate - do not change STA rate */ |
| return; |
| } |
| |
| mode = local->oper_hw_mode; |
| maxrate = sdata->bss ? sdata->bss->max_ratectrl_rateidx : -1; |
| |
| if (i > mode->num_rates) |
| i = mode->num_rates - 2; |
| |
| while (i + 1 < mode->num_rates) { |
| i++; |
| if (sta->supp_rates & BIT(i) && |
| mode->rates[i].flags & IEEE80211_RATE_SUPPORTED && |
| (maxrate < 0 || i <= maxrate)) { |
| sta->txrate = i; |
| break; |
| } |
| } |
| } |
| |
| |
| static void rate_control_rate_dec(struct ieee80211_local *local, |
| struct sta_info *sta) |
| { |
| struct ieee80211_sub_if_data *sdata; |
| struct ieee80211_hw_mode *mode; |
| int i = sta->txrate; |
| |
| sdata = IEEE80211_DEV_TO_SUB_IF(sta->dev); |
| if (sdata->bss && sdata->bss->force_unicast_rateidx > -1) { |
| /* forced unicast rate - do not change STA rate */ |
| return; |
| } |
| |
| mode = local->oper_hw_mode; |
| if (i > mode->num_rates) |
| i = mode->num_rates; |
| |
| while (i > 0) { |
| i--; |
| if (sta->supp_rates & BIT(i) && |
| mode->rates[i].flags & IEEE80211_RATE_SUPPORTED) { |
| sta->txrate = i; |
| break; |
| } |
| } |
| } |
| |
| |
| static struct ieee80211_rate * |
| rate_control_lowest_rate(struct ieee80211_local *local, |
| struct ieee80211_hw_mode *mode) |
| { |
| int i; |
| |
| for (i = 0; i < mode->num_rates; i++) { |
| struct ieee80211_rate *rate = &mode->rates[i]; |
| |
| if (rate->flags & IEEE80211_RATE_SUPPORTED) |
| return rate; |
| } |
| |
| printk(KERN_DEBUG "rate_control_lowest_rate - no supported rates " |
| "found\n"); |
| return &mode->rates[0]; |
| } |
| |
| |
| struct global_rate_control { |
| int dummy; |
| }; |
| |
| struct sta_rate_control { |
| unsigned long last_rate_change; |
| u32 tx_num_failures; |
| u32 tx_num_xmit; |
| |
| unsigned long avg_rate_update; |
| u32 tx_avg_rate_sum; |
| u32 tx_avg_rate_num; |
| |
| #ifdef CONFIG_MAC80211_DEBUGFS |
| struct dentry *tx_avg_rate_sum_dentry; |
| struct dentry *tx_avg_rate_num_dentry; |
| #endif |
| }; |
| |
| |
| static void rate_control_simple_tx_status(void *priv, struct net_device *dev, |
| struct sk_buff *skb, |
| struct ieee80211_tx_status *status) |
| { |
| struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; |
| struct sta_info *sta; |
| struct sta_rate_control *srctrl; |
| |
| sta = sta_info_get(local, hdr->addr1); |
| |
| if (!sta) |
| return; |
| |
| srctrl = sta->rate_ctrl_priv; |
| srctrl->tx_num_xmit++; |
| if (status->excessive_retries) { |
| sta->antenna_sel_tx = sta->antenna_sel_tx == 1 ? 2 : 1; |
| sta->antenna_sel_rx = sta->antenna_sel_rx == 1 ? 2 : 1; |
| if (local->sta_antenna_sel == STA_ANTENNA_SEL_SW_CTRL_DEBUG) { |
| printk(KERN_DEBUG "%s: " MAC_FMT " TX antenna --> %d " |
| "RX antenna --> %d (@%lu)\n", |
| dev->name, MAC_ARG(hdr->addr1), |
| sta->antenna_sel_tx, sta->antenna_sel_rx, jiffies); |
| } |
| srctrl->tx_num_failures++; |
| sta->tx_retry_failed++; |
| sta->tx_num_consecutive_failures++; |
| sta->tx_num_mpdu_fail++; |
| } else { |
| sta->last_ack_rssi[0] = sta->last_ack_rssi[1]; |
| sta->last_ack_rssi[1] = sta->last_ack_rssi[2]; |
| sta->last_ack_rssi[2] = status->ack_signal; |
| sta->tx_num_consecutive_failures = 0; |
| sta->tx_num_mpdu_ok++; |
| } |
| sta->tx_retry_count += status->retry_count; |
| sta->tx_num_mpdu_fail += status->retry_count; |
| |
| if (time_after(jiffies, |
| srctrl->last_rate_change + RATE_CONTROL_INTERVAL) && |
| srctrl->tx_num_xmit > RATE_CONTROL_MIN_TX) { |
| u32 per_failed; |
| srctrl->last_rate_change = jiffies; |
| |
| per_failed = (100 * sta->tx_num_mpdu_fail) / |
| (sta->tx_num_mpdu_fail + sta->tx_num_mpdu_ok); |
| /* TODO: calculate average per_failed to make adjusting |
| * parameters easier */ |
| #if 0 |
| if (net_ratelimit()) { |
| printk(KERN_DEBUG "MPDU fail=%d ok=%d per_failed=%d\n", |
| sta->tx_num_mpdu_fail, sta->tx_num_mpdu_ok, |
| per_failed); |
| } |
| #endif |
| |
| if (per_failed > local->rate_ctrl_num_down) { |
| rate_control_rate_dec(local, sta); |
| } else if (per_failed < local->rate_ctrl_num_up) { |
| rate_control_rate_inc(local, sta); |
| } |
| srctrl->tx_avg_rate_sum += status->control.rate->rate; |
| srctrl->tx_avg_rate_num++; |
| srctrl->tx_num_failures = 0; |
| srctrl->tx_num_xmit = 0; |
| } else if (sta->tx_num_consecutive_failures >= |
| RATE_CONTROL_EMERG_DEC) { |
| rate_control_rate_dec(local, sta); |
| } |
| |
| if (srctrl->avg_rate_update + 60 * HZ < jiffies) { |
| srctrl->avg_rate_update = jiffies; |
| if (srctrl->tx_avg_rate_num > 0) { |
| #ifdef CONFIG_MAC80211_VERBOSE_DEBUG |
| printk(KERN_DEBUG "%s: STA " MAC_FMT " Average rate: " |
| "%d (%d/%d)\n", |
| dev->name, MAC_ARG(sta->addr), |
| srctrl->tx_avg_rate_sum / |
| srctrl->tx_avg_rate_num, |
| srctrl->tx_avg_rate_sum, |
| srctrl->tx_avg_rate_num); |
| #endif /* CONFIG_MAC80211_VERBOSE_DEBUG */ |
| srctrl->tx_avg_rate_sum = 0; |
| srctrl->tx_avg_rate_num = 0; |
| } |
| } |
| |
| sta_info_put(sta); |
| } |
| |
| |
| static struct ieee80211_rate * |
| rate_control_simple_get_rate(void *priv, struct net_device *dev, |
| struct sk_buff *skb, |
| struct rate_control_extra *extra) |
| { |
| struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); |
| struct ieee80211_sub_if_data *sdata; |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; |
| struct ieee80211_hw_mode *mode = extra->mode; |
| struct sta_info *sta; |
| int rateidx, nonerp_idx; |
| u16 fc; |
| |
| memset(extra, 0, sizeof(*extra)); |
| |
| fc = le16_to_cpu(hdr->frame_control); |
| if ((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA || |
| (hdr->addr1[0] & 0x01)) { |
| /* Send management frames and broadcast/multicast data using |
| * lowest rate. */ |
| /* TODO: this could probably be improved.. */ |
| return rate_control_lowest_rate(local, mode); |
| } |
| |
| sta = sta_info_get(local, hdr->addr1); |
| |
| if (!sta) |
| return rate_control_lowest_rate(local, mode); |
| |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| if (sdata->bss && sdata->bss->force_unicast_rateidx > -1) |
| sta->txrate = sdata->bss->force_unicast_rateidx; |
| |
| rateidx = sta->txrate; |
| |
| if (rateidx >= mode->num_rates) |
| rateidx = mode->num_rates - 1; |
| |
| sta->last_txrate = rateidx; |
| nonerp_idx = rateidx; |
| while (nonerp_idx > 0 && |
| ((mode->rates[nonerp_idx].flags & IEEE80211_RATE_ERP) || |
| !(mode->rates[nonerp_idx].flags & IEEE80211_RATE_SUPPORTED) || |
| !(sta->supp_rates & BIT(nonerp_idx)))) |
| nonerp_idx--; |
| extra->nonerp = &mode->rates[nonerp_idx]; |
| |
| sta_info_put(sta); |
| |
| return &mode->rates[rateidx]; |
| } |
| |
| |
| static void rate_control_simple_rate_init(void *priv, void *priv_sta, |
| struct ieee80211_local *local, |
| struct sta_info *sta) |
| { |
| struct ieee80211_hw_mode *mode; |
| int i; |
| sta->txrate = 0; |
| mode = local->oper_hw_mode; |
| /* TODO: what is a good starting rate for STA? About middle? Maybe not |
| * the lowest or the highest rate.. Could consider using RSSI from |
| * previous packets? Need to have IEEE 802.1X auth succeed immediately |
| * after assoc.. */ |
| for (i = 0; i < mode->num_rates; i++) { |
| if ((sta->supp_rates & BIT(i)) && |
| (mode->rates[i].flags & IEEE80211_RATE_SUPPORTED)) |
| sta->txrate = i; |
| } |
| } |
| |
| |
| static void * rate_control_simple_alloc(struct ieee80211_local *local) |
| { |
| struct global_rate_control *rctrl; |
| |
| rctrl = kzalloc(sizeof(*rctrl), GFP_ATOMIC); |
| |
| return rctrl; |
| } |
| |
| |
| static void rate_control_simple_free(void *priv) |
| { |
| struct global_rate_control *rctrl = priv; |
| kfree(rctrl); |
| } |
| |
| |
| static void rate_control_simple_clear(void *priv) |
| { |
| } |
| |
| |
| static void * rate_control_simple_alloc_sta(void *priv, gfp_t gfp) |
| { |
| struct sta_rate_control *rctrl; |
| |
| rctrl = kzalloc(sizeof(*rctrl), gfp); |
| |
| return rctrl; |
| } |
| |
| |
| static void rate_control_simple_free_sta(void *priv, void *priv_sta) |
| { |
| struct sta_rate_control *rctrl = priv_sta; |
| kfree(rctrl); |
| } |
| |
| #ifdef CONFIG_MAC80211_DEBUGFS |
| |
| static int open_file_generic(struct inode *inode, struct file *file) |
| { |
| file->private_data = inode->i_private; |
| return 0; |
| } |
| |
| static ssize_t sta_tx_avg_rate_sum_read(struct file *file, |
| char __user *userbuf, |
| size_t count, loff_t *ppos) |
| { |
| struct sta_rate_control *srctrl = file->private_data; |
| char buf[20]; |
| |
| sprintf(buf, "%d\n", srctrl->tx_avg_rate_sum); |
| return simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf)); |
| } |
| |
| static const struct file_operations sta_tx_avg_rate_sum_ops = { |
| .read = sta_tx_avg_rate_sum_read, |
| .open = open_file_generic, |
| }; |
| |
| static ssize_t sta_tx_avg_rate_num_read(struct file *file, |
| char __user *userbuf, |
| size_t count, loff_t *ppos) |
| { |
| struct sta_rate_control *srctrl = file->private_data; |
| char buf[20]; |
| |
| sprintf(buf, "%d\n", srctrl->tx_avg_rate_num); |
| return simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf)); |
| } |
| |
| static const struct file_operations sta_tx_avg_rate_num_ops = { |
| .read = sta_tx_avg_rate_num_read, |
| .open = open_file_generic, |
| }; |
| |
| static void rate_control_simple_add_sta_debugfs(void *priv, void *priv_sta, |
| struct dentry *dir) |
| { |
| struct sta_rate_control *srctrl = priv_sta; |
| |
| srctrl->tx_avg_rate_num_dentry = |
| debugfs_create_file("rc_simple_sta_tx_avg_rate_num", 0400, |
| dir, srctrl, &sta_tx_avg_rate_num_ops); |
| srctrl->tx_avg_rate_sum_dentry = |
| debugfs_create_file("rc_simple_sta_tx_avg_rate_sum", 0400, |
| dir, srctrl, &sta_tx_avg_rate_sum_ops); |
| } |
| |
| static void rate_control_simple_remove_sta_debugfs(void *priv, void *priv_sta) |
| { |
| struct sta_rate_control *srctrl = priv_sta; |
| |
| debugfs_remove(srctrl->tx_avg_rate_sum_dentry); |
| debugfs_remove(srctrl->tx_avg_rate_num_dentry); |
| } |
| #endif |
| |
| static struct rate_control_ops rate_control_simple = { |
| .module = THIS_MODULE, |
| .name = "simple", |
| .tx_status = rate_control_simple_tx_status, |
| .get_rate = rate_control_simple_get_rate, |
| .rate_init = rate_control_simple_rate_init, |
| .clear = rate_control_simple_clear, |
| .alloc = rate_control_simple_alloc, |
| .free = rate_control_simple_free, |
| .alloc_sta = rate_control_simple_alloc_sta, |
| .free_sta = rate_control_simple_free_sta, |
| #ifdef CONFIG_MAC80211_DEBUGFS |
| .add_sta_debugfs = rate_control_simple_add_sta_debugfs, |
| .remove_sta_debugfs = rate_control_simple_remove_sta_debugfs, |
| #endif |
| }; |
| |
| |
| static int __init rate_control_simple_init(void) |
| { |
| return ieee80211_rate_control_register(&rate_control_simple); |
| } |
| |
| |
| static void __exit rate_control_simple_exit(void) |
| { |
| ieee80211_rate_control_unregister(&rate_control_simple); |
| } |
| |
| |
| module_init(rate_control_simple_init); |
| module_exit(rate_control_simple_exit); |
| |
| MODULE_DESCRIPTION("Simple rate control algorithm for ieee80211"); |
| MODULE_LICENSE("GPL"); |