| /* floppy.h: Sparc specific parts of the Floppy driver. | 
 |  * | 
 |  * Copyright (C) 1996, 2007 David S. Miller (davem@davemloft.net) | 
 |  * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz) | 
 |  * | 
 |  * Ultra/PCI support added: Sep 1997  Eddie C. Dost  (ecd@skynet.be) | 
 |  */ | 
 |  | 
 | #ifndef __ASM_SPARC64_FLOPPY_H | 
 | #define __ASM_SPARC64_FLOPPY_H | 
 |  | 
 | #include <linux/init.h> | 
 | #include <linux/pci.h> | 
 |  | 
 | #include <asm/page.h> | 
 | #include <asm/pgtable.h> | 
 | #include <asm/system.h> | 
 | #include <asm/idprom.h> | 
 | #include <asm/oplib.h> | 
 | #include <asm/auxio.h> | 
 | #include <asm/sbus.h> | 
 | #include <asm/irq.h> | 
 |  | 
 |  | 
 | /* | 
 |  * Define this to enable exchanging drive 0 and 1 if only drive 1 is | 
 |  * probed on PCI machines. | 
 |  */ | 
 | #undef PCI_FDC_SWAP_DRIVES | 
 |  | 
 |  | 
 | /* References: | 
 |  * 1) Netbsd Sun floppy driver. | 
 |  * 2) NCR 82077 controller manual | 
 |  * 3) Intel 82077 controller manual | 
 |  */ | 
 | struct sun_flpy_controller { | 
 | 	volatile unsigned char status1_82077; /* Auxiliary Status reg. 1 */ | 
 | 	volatile unsigned char status2_82077; /* Auxiliary Status reg. 2 */ | 
 | 	volatile unsigned char dor_82077;     /* Digital Output reg. */ | 
 | 	volatile unsigned char tapectl_82077; /* Tape Control reg */ | 
 | 	volatile unsigned char status_82077;  /* Main Status Register. */ | 
 | #define drs_82077              status_82077   /* Digital Rate Select reg. */ | 
 | 	volatile unsigned char data_82077;    /* Data fifo. */ | 
 | 	volatile unsigned char ___unused; | 
 | 	volatile unsigned char dir_82077;     /* Digital Input reg. */ | 
 | #define dcr_82077              dir_82077      /* Config Control reg. */ | 
 | }; | 
 |  | 
 | /* You'll only ever find one controller on an Ultra anyways. */ | 
 | static struct sun_flpy_controller *sun_fdc = (struct sun_flpy_controller *)-1; | 
 | unsigned long fdc_status; | 
 | static struct sbus_dev *floppy_sdev = NULL; | 
 |  | 
 | struct sun_floppy_ops { | 
 | 	unsigned char	(*fd_inb) (unsigned long port); | 
 | 	void		(*fd_outb) (unsigned char value, unsigned long port); | 
 | 	void		(*fd_enable_dma) (void); | 
 | 	void		(*fd_disable_dma) (void); | 
 | 	void		(*fd_set_dma_mode) (int); | 
 | 	void		(*fd_set_dma_addr) (char *); | 
 | 	void		(*fd_set_dma_count) (int); | 
 | 	unsigned int	(*get_dma_residue) (void); | 
 | 	int		(*fd_request_irq) (void); | 
 | 	void		(*fd_free_irq) (void); | 
 | 	int		(*fd_eject) (int); | 
 | }; | 
 |  | 
 | static struct sun_floppy_ops sun_fdops; | 
 |  | 
 | #define fd_inb(port)              sun_fdops.fd_inb(port) | 
 | #define fd_outb(value,port)       sun_fdops.fd_outb(value,port) | 
 | #define fd_enable_dma()           sun_fdops.fd_enable_dma() | 
 | #define fd_disable_dma()          sun_fdops.fd_disable_dma() | 
 | #define fd_request_dma()          (0) /* nothing... */ | 
 | #define fd_free_dma()             /* nothing... */ | 
 | #define fd_clear_dma_ff()         /* nothing... */ | 
 | #define fd_set_dma_mode(mode)     sun_fdops.fd_set_dma_mode(mode) | 
 | #define fd_set_dma_addr(addr)     sun_fdops.fd_set_dma_addr(addr) | 
 | #define fd_set_dma_count(count)   sun_fdops.fd_set_dma_count(count) | 
 | #define get_dma_residue(x)        sun_fdops.get_dma_residue() | 
 | #define fd_cacheflush(addr, size) /* nothing... */ | 
 | #define fd_request_irq()          sun_fdops.fd_request_irq() | 
 | #define fd_free_irq()             sun_fdops.fd_free_irq() | 
 | #define fd_eject(drive)           sun_fdops.fd_eject(drive) | 
 |  | 
 | /* Super paranoid... */ | 
 | #undef HAVE_DISABLE_HLT | 
 |  | 
 | static int sun_floppy_types[2] = { 0, 0 }; | 
 |  | 
 | /* Here is where we catch the floppy driver trying to initialize, | 
 |  * therefore this is where we call the PROM device tree probing | 
 |  * routine etc. on the Sparc. | 
 |  */ | 
 | #define FLOPPY0_TYPE		sun_floppy_init() | 
 | #define FLOPPY1_TYPE		sun_floppy_types[1] | 
 |  | 
 | #define FDC1			((unsigned long)sun_fdc) | 
 |  | 
 | #define N_FDC    1 | 
 | #define N_DRIVE  8 | 
 |  | 
 | /* No 64k boundary crossing problems on the Sparc. */ | 
 | #define CROSS_64KB(a,s) (0) | 
 |  | 
 | static unsigned char sun_82077_fd_inb(unsigned long port) | 
 | { | 
 | 	udelay(5); | 
 | 	switch(port & 7) { | 
 | 	default: | 
 | 		printk("floppy: Asked to read unknown port %lx\n", port); | 
 | 		panic("floppy: Port bolixed."); | 
 | 	case 4: /* FD_STATUS */ | 
 | 		return sbus_readb(&sun_fdc->status_82077) & ~STATUS_DMA; | 
 | 	case 5: /* FD_DATA */ | 
 | 		return sbus_readb(&sun_fdc->data_82077); | 
 | 	case 7: /* FD_DIR */ | 
 | 		/* XXX: Is DCL on 0x80 in sun4m? */ | 
 | 		return sbus_readb(&sun_fdc->dir_82077); | 
 | 	}; | 
 | 	panic("sun_82072_fd_inb: How did I get here?"); | 
 | } | 
 |  | 
 | static void sun_82077_fd_outb(unsigned char value, unsigned long port) | 
 | { | 
 | 	udelay(5); | 
 | 	switch(port & 7) { | 
 | 	default: | 
 | 		printk("floppy: Asked to write to unknown port %lx\n", port); | 
 | 		panic("floppy: Port bolixed."); | 
 | 	case 2: /* FD_DOR */ | 
 | 		/* Happily, the 82077 has a real DOR register. */ | 
 | 		sbus_writeb(value, &sun_fdc->dor_82077); | 
 | 		break; | 
 | 	case 5: /* FD_DATA */ | 
 | 		sbus_writeb(value, &sun_fdc->data_82077); | 
 | 		break; | 
 | 	case 7: /* FD_DCR */ | 
 | 		sbus_writeb(value, &sun_fdc->dcr_82077); | 
 | 		break; | 
 | 	case 4: /* FD_STATUS */ | 
 | 		sbus_writeb(value, &sun_fdc->status_82077); | 
 | 		break; | 
 | 	}; | 
 | 	return; | 
 | } | 
 |  | 
 | /* For pseudo-dma (Sun floppy drives have no real DMA available to | 
 |  * them so we must eat the data fifo bytes directly ourselves) we have | 
 |  * three state variables.  doing_pdma tells our inline low-level | 
 |  * assembly floppy interrupt entry point whether it should sit and eat | 
 |  * bytes from the fifo or just transfer control up to the higher level | 
 |  * floppy interrupt c-code.  I tried very hard but I could not get the | 
 |  * pseudo-dma to work in c-code without getting many overruns and | 
 |  * underruns.  If non-zero, doing_pdma encodes the direction of | 
 |  * the transfer for debugging.  1=read 2=write | 
 |  */ | 
 | unsigned char *pdma_vaddr; | 
 | unsigned long pdma_size; | 
 | volatile int doing_pdma = 0; | 
 |  | 
 | /* This is software state */ | 
 | char *pdma_base = NULL; | 
 | unsigned long pdma_areasize; | 
 |  | 
 | /* Common routines to all controller types on the Sparc. */ | 
 | static void sun_fd_disable_dma(void) | 
 | { | 
 | 	doing_pdma = 0; | 
 | 	if (pdma_base) { | 
 | 		mmu_unlockarea(pdma_base, pdma_areasize); | 
 | 		pdma_base = NULL; | 
 | 	} | 
 | } | 
 |  | 
 | static void sun_fd_set_dma_mode(int mode) | 
 | { | 
 | 	switch(mode) { | 
 | 	case DMA_MODE_READ: | 
 | 		doing_pdma = 1; | 
 | 		break; | 
 | 	case DMA_MODE_WRITE: | 
 | 		doing_pdma = 2; | 
 | 		break; | 
 | 	default: | 
 | 		printk("Unknown dma mode %d\n", mode); | 
 | 		panic("floppy: Giving up..."); | 
 | 	} | 
 | } | 
 |  | 
 | static void sun_fd_set_dma_addr(char *buffer) | 
 | { | 
 | 	pdma_vaddr = buffer; | 
 | } | 
 |  | 
 | static void sun_fd_set_dma_count(int length) | 
 | { | 
 | 	pdma_size = length; | 
 | } | 
 |  | 
 | static void sun_fd_enable_dma(void) | 
 | { | 
 | 	pdma_vaddr = mmu_lockarea(pdma_vaddr, pdma_size); | 
 | 	pdma_base = pdma_vaddr; | 
 | 	pdma_areasize = pdma_size; | 
 | } | 
 |  | 
 | irqreturn_t sparc_floppy_irq(int irq, void *dev_cookie) | 
 | { | 
 | 	if (likely(doing_pdma)) { | 
 | 		void __iomem *stat = (void __iomem *) fdc_status; | 
 | 		unsigned char *vaddr = pdma_vaddr; | 
 | 		unsigned long size = pdma_size; | 
 | 		u8 val; | 
 |  | 
 | 		while (size) { | 
 | 			val = readb(stat); | 
 | 			if (unlikely(!(val & 0x80))) { | 
 | 				pdma_vaddr = vaddr; | 
 | 				pdma_size = size; | 
 | 				return IRQ_HANDLED; | 
 | 			} | 
 | 			if (unlikely(!(val & 0x20))) { | 
 | 				pdma_vaddr = vaddr; | 
 | 				pdma_size = size; | 
 | 				doing_pdma = 0; | 
 | 				goto main_interrupt; | 
 | 			} | 
 | 			if (val & 0x40) { | 
 | 				/* read */ | 
 | 				*vaddr++ = readb(stat + 1); | 
 | 			} else { | 
 | 				unsigned char data = *vaddr++; | 
 |  | 
 | 				/* write */ | 
 | 				writeb(data, stat + 1); | 
 | 			} | 
 | 			size--; | 
 | 		} | 
 |  | 
 | 		pdma_vaddr = vaddr; | 
 | 		pdma_size = size; | 
 |  | 
 | 		/* Send Terminal Count pulse to floppy controller. */ | 
 | 		val = readb(auxio_register); | 
 | 		val |= AUXIO_AUX1_FTCNT; | 
 | 		writeb(val, auxio_register); | 
 | 		val &= ~AUXIO_AUX1_FTCNT; | 
 | 		writeb(val, auxio_register); | 
 |  | 
 | 		doing_pdma = 0; | 
 | 	} | 
 |  | 
 | main_interrupt: | 
 | 	return floppy_interrupt(irq, dev_cookie); | 
 | } | 
 |  | 
 | static int sun_fd_request_irq(void) | 
 | { | 
 | 	static int once = 0; | 
 | 	int error; | 
 |  | 
 | 	if(!once) { | 
 | 		once = 1; | 
 |  | 
 | 		error = request_irq(FLOPPY_IRQ, sparc_floppy_irq,  | 
 | 				    IRQF_DISABLED, "floppy", NULL); | 
 |  | 
 | 		return ((error == 0) ? 0 : -1); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void sun_fd_free_irq(void) | 
 | { | 
 | } | 
 |  | 
 | static unsigned int sun_get_dma_residue(void) | 
 | { | 
 | 	/* XXX This isn't really correct. XXX */ | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int sun_fd_eject(int drive) | 
 | { | 
 | 	set_dor(0x00, 0xff, 0x90); | 
 | 	udelay(500); | 
 | 	set_dor(0x00, 0x6f, 0x00); | 
 | 	udelay(500); | 
 | 	return 0; | 
 | } | 
 |  | 
 | #ifdef CONFIG_PCI | 
 | #include <asm/ebus.h> | 
 | #include <asm/ns87303.h> | 
 |  | 
 | static struct ebus_dma_info sun_pci_fd_ebus_dma; | 
 | static struct pci_dev *sun_pci_ebus_dev; | 
 | static int sun_pci_broken_drive = -1; | 
 |  | 
 | struct sun_pci_dma_op { | 
 | 	unsigned int 	addr; | 
 | 	int		len; | 
 | 	int		direction; | 
 | 	char		*buf; | 
 | }; | 
 | static struct sun_pci_dma_op sun_pci_dma_current = { -1U, 0, 0, NULL}; | 
 | static struct sun_pci_dma_op sun_pci_dma_pending = { -1U, 0, 0, NULL}; | 
 |  | 
 | extern irqreturn_t floppy_interrupt(int irq, void *dev_id); | 
 |  | 
 | static unsigned char sun_pci_fd_inb(unsigned long port) | 
 | { | 
 | 	udelay(5); | 
 | 	return inb(port); | 
 | } | 
 |  | 
 | static void sun_pci_fd_outb(unsigned char val, unsigned long port) | 
 | { | 
 | 	udelay(5); | 
 | 	outb(val, port); | 
 | } | 
 |  | 
 | static void sun_pci_fd_broken_outb(unsigned char val, unsigned long port) | 
 | { | 
 | 	udelay(5); | 
 | 	/* | 
 | 	 * XXX: Due to SUN's broken floppy connector on AX and AXi | 
 | 	 *      we need to turn on MOTOR_0 also, if the floppy is | 
 | 	 *      jumpered to DS1 (like most PC floppies are). I hope | 
 | 	 *      this does not hurt correct hardware like the AXmp. | 
 | 	 *      (Eddie, Sep 12 1998). | 
 | 	 */ | 
 | 	if (port == ((unsigned long)sun_fdc) + 2) { | 
 | 		if (((val & 0x03) == sun_pci_broken_drive) && (val & 0x20)) { | 
 | 			val |= 0x10; | 
 | 		} | 
 | 	} | 
 | 	outb(val, port); | 
 | } | 
 |  | 
 | #ifdef PCI_FDC_SWAP_DRIVES | 
 | static void sun_pci_fd_lde_broken_outb(unsigned char val, unsigned long port) | 
 | { | 
 | 	udelay(5); | 
 | 	/* | 
 | 	 * XXX: Due to SUN's broken floppy connector on AX and AXi | 
 | 	 *      we need to turn on MOTOR_0 also, if the floppy is | 
 | 	 *      jumpered to DS1 (like most PC floppies are). I hope | 
 | 	 *      this does not hurt correct hardware like the AXmp. | 
 | 	 *      (Eddie, Sep 12 1998). | 
 | 	 */ | 
 | 	if (port == ((unsigned long)sun_fdc) + 2) { | 
 | 		if (((val & 0x03) == sun_pci_broken_drive) && (val & 0x10)) { | 
 | 			val &= ~(0x03); | 
 | 			val |= 0x21; | 
 | 		} | 
 | 	} | 
 | 	outb(val, port); | 
 | } | 
 | #endif /* PCI_FDC_SWAP_DRIVES */ | 
 |  | 
 | static void sun_pci_fd_enable_dma(void) | 
 | { | 
 | 	BUG_ON((NULL == sun_pci_dma_pending.buf) 	|| | 
 | 	    (0	  == sun_pci_dma_pending.len) 	|| | 
 | 	    (0	  == sun_pci_dma_pending.direction)); | 
 |  | 
 | 	sun_pci_dma_current.buf = sun_pci_dma_pending.buf; | 
 | 	sun_pci_dma_current.len = sun_pci_dma_pending.len; | 
 | 	sun_pci_dma_current.direction = sun_pci_dma_pending.direction; | 
 |  | 
 | 	sun_pci_dma_pending.buf  = NULL; | 
 | 	sun_pci_dma_pending.len  = 0; | 
 | 	sun_pci_dma_pending.direction = 0; | 
 | 	sun_pci_dma_pending.addr = -1U; | 
 |  | 
 | 	sun_pci_dma_current.addr =  | 
 | 		pci_map_single(sun_pci_ebus_dev, | 
 | 			       sun_pci_dma_current.buf, | 
 | 			       sun_pci_dma_current.len, | 
 | 			       sun_pci_dma_current.direction); | 
 |  | 
 | 	ebus_dma_enable(&sun_pci_fd_ebus_dma, 1); | 
 |  | 
 | 	if (ebus_dma_request(&sun_pci_fd_ebus_dma, | 
 | 			     sun_pci_dma_current.addr, | 
 | 			     sun_pci_dma_current.len)) | 
 | 		BUG(); | 
 | } | 
 |  | 
 | static void sun_pci_fd_disable_dma(void) | 
 | { | 
 | 	ebus_dma_enable(&sun_pci_fd_ebus_dma, 0); | 
 | 	if (sun_pci_dma_current.addr != -1U) | 
 | 		pci_unmap_single(sun_pci_ebus_dev, | 
 | 				 sun_pci_dma_current.addr, | 
 | 				 sun_pci_dma_current.len, | 
 | 				 sun_pci_dma_current.direction); | 
 | 	sun_pci_dma_current.addr = -1U; | 
 | } | 
 |  | 
 | static void sun_pci_fd_set_dma_mode(int mode) | 
 | { | 
 | 	if (mode == DMA_MODE_WRITE) | 
 | 		sun_pci_dma_pending.direction = PCI_DMA_TODEVICE; | 
 | 	else | 
 | 		sun_pci_dma_pending.direction = PCI_DMA_FROMDEVICE; | 
 |  | 
 | 	ebus_dma_prepare(&sun_pci_fd_ebus_dma, mode != DMA_MODE_WRITE); | 
 | } | 
 |  | 
 | static void sun_pci_fd_set_dma_count(int length) | 
 | { | 
 | 	sun_pci_dma_pending.len = length; | 
 | } | 
 |  | 
 | static void sun_pci_fd_set_dma_addr(char *buffer) | 
 | { | 
 | 	sun_pci_dma_pending.buf = buffer; | 
 | } | 
 |  | 
 | static unsigned int sun_pci_get_dma_residue(void) | 
 | { | 
 | 	return ebus_dma_residue(&sun_pci_fd_ebus_dma); | 
 | } | 
 |  | 
 | static int sun_pci_fd_request_irq(void) | 
 | { | 
 | 	return ebus_dma_irq_enable(&sun_pci_fd_ebus_dma, 1); | 
 | } | 
 |  | 
 | static void sun_pci_fd_free_irq(void) | 
 | { | 
 | 	ebus_dma_irq_enable(&sun_pci_fd_ebus_dma, 0); | 
 | } | 
 |  | 
 | static int sun_pci_fd_eject(int drive) | 
 | { | 
 | 	return -EINVAL; | 
 | } | 
 |  | 
 | void sun_pci_fd_dma_callback(struct ebus_dma_info *p, int event, void *cookie) | 
 | { | 
 | 	floppy_interrupt(0, NULL); | 
 | } | 
 |  | 
 | /* | 
 |  * Floppy probing, we'd like to use /dev/fd0 for a single Floppy on PCI, | 
 |  * even if this is configured using DS1, thus looks like /dev/fd1 with | 
 |  * the cabling used in Ultras. | 
 |  */ | 
 | #define DOR	(port + 2) | 
 | #define MSR	(port + 4) | 
 | #define FIFO	(port + 5) | 
 |  | 
 | static void sun_pci_fd_out_byte(unsigned long port, unsigned char val, | 
 | 			        unsigned long reg) | 
 | { | 
 | 	unsigned char status; | 
 | 	int timeout = 1000; | 
 |  | 
 | 	while (!((status = inb(MSR)) & 0x80) && --timeout) | 
 | 		udelay(100); | 
 | 	outb(val, reg); | 
 | } | 
 |  | 
 | static unsigned char sun_pci_fd_sensei(unsigned long port) | 
 | { | 
 | 	unsigned char result[2] = { 0x70, 0x00 }; | 
 | 	unsigned char status; | 
 | 	int i = 0; | 
 |  | 
 | 	sun_pci_fd_out_byte(port, 0x08, FIFO); | 
 | 	do { | 
 | 		int timeout = 1000; | 
 |  | 
 | 		while (!((status = inb(MSR)) & 0x80) && --timeout) | 
 | 			udelay(100); | 
 |  | 
 | 		if (!timeout) | 
 | 			break; | 
 |  | 
 | 		if ((status & 0xf0) == 0xd0) | 
 | 			result[i++] = inb(FIFO); | 
 | 		else | 
 | 			break; | 
 | 	} while (i < 2); | 
 |  | 
 | 	return result[0]; | 
 | } | 
 |  | 
 | static void sun_pci_fd_reset(unsigned long port) | 
 | { | 
 | 	unsigned char mask = 0x00; | 
 | 	unsigned char status; | 
 | 	int timeout = 10000; | 
 |  | 
 | 	outb(0x80, MSR); | 
 | 	do { | 
 | 		status = sun_pci_fd_sensei(port); | 
 | 		if ((status & 0xc0) == 0xc0) | 
 | 			mask |= 1 << (status & 0x03); | 
 | 		else | 
 | 			udelay(100); | 
 | 	} while ((mask != 0x0f) && --timeout); | 
 | } | 
 |  | 
 | static int sun_pci_fd_test_drive(unsigned long port, int drive) | 
 | { | 
 | 	unsigned char status, data; | 
 | 	int timeout = 1000; | 
 | 	int ready; | 
 |  | 
 | 	sun_pci_fd_reset(port); | 
 |  | 
 | 	data = (0x10 << drive) | 0x0c | drive; | 
 | 	sun_pci_fd_out_byte(port, data, DOR); | 
 |  | 
 | 	sun_pci_fd_out_byte(port, 0x07, FIFO); | 
 | 	sun_pci_fd_out_byte(port, drive & 0x03, FIFO); | 
 |  | 
 | 	do { | 
 | 		udelay(100); | 
 | 		status = sun_pci_fd_sensei(port); | 
 | 	} while (((status & 0xc0) == 0x80) && --timeout); | 
 |  | 
 | 	if (!timeout) | 
 | 		ready = 0; | 
 | 	else | 
 | 		ready = (status & 0x10) ? 0 : 1; | 
 |  | 
 | 	sun_pci_fd_reset(port); | 
 | 	return ready; | 
 | } | 
 | #undef FIFO | 
 | #undef MSR | 
 | #undef DOR | 
 |  | 
 | #endif /* CONFIG_PCI */ | 
 |  | 
 | #ifdef CONFIG_PCI | 
 | static int __init ebus_fdthree_p(struct linux_ebus_device *edev) | 
 | { | 
 | 	if (!strcmp(edev->prom_node->name, "fdthree")) | 
 | 		return 1; | 
 | 	if (!strcmp(edev->prom_node->name, "floppy")) { | 
 | 		const char *compat; | 
 |  | 
 | 		compat = of_get_property(edev->prom_node, | 
 | 					 "compatible", NULL); | 
 | 		if (compat && !strcmp(compat, "fdthree")) | 
 | 			return 1; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 | #endif | 
 |  | 
 | static unsigned long __init sun_floppy_init(void) | 
 | { | 
 | 	char state[128]; | 
 | 	struct sbus_bus *bus; | 
 | 	struct sbus_dev *sdev = NULL; | 
 | 	static int initialized = 0; | 
 |  | 
 | 	if (initialized) | 
 | 		return sun_floppy_types[0]; | 
 | 	initialized = 1; | 
 |  | 
 | 	for_all_sbusdev (sdev, bus) { | 
 | 		if (!strcmp(sdev->prom_name, "SUNW,fdtwo"))  | 
 | 			break; | 
 | 	} | 
 | 	if(sdev) { | 
 | 		floppy_sdev = sdev; | 
 | 		FLOPPY_IRQ = sdev->irqs[0]; | 
 | 	} else { | 
 | #ifdef CONFIG_PCI | 
 | 		struct linux_ebus *ebus; | 
 | 		struct linux_ebus_device *edev = NULL; | 
 | 		unsigned long config = 0; | 
 | 		void __iomem *auxio_reg; | 
 | 		const char *state_prop; | 
 |  | 
 | 		for_each_ebus(ebus) { | 
 | 			for_each_ebusdev(edev, ebus) { | 
 | 				if (ebus_fdthree_p(edev)) | 
 | 					goto ebus_done; | 
 | 			} | 
 | 		} | 
 | 	ebus_done: | 
 | 		if (!edev) | 
 | 			return 0; | 
 |  | 
 | 		state_prop = of_get_property(edev->prom_node, "status", NULL); | 
 | 		if (state_prop && !strncmp(state_prop, "disabled", 8)) | 
 | 			return 0; | 
 | 			 | 
 | 		FLOPPY_IRQ = edev->irqs[0]; | 
 |  | 
 | 		/* Make sure the high density bit is set, some systems | 
 | 		 * (most notably Ultra5/Ultra10) come up with it clear. | 
 | 		 */ | 
 | 		auxio_reg = (void __iomem *) edev->resource[2].start; | 
 | 		writel(readl(auxio_reg)|0x2, auxio_reg); | 
 |  | 
 | 		sun_pci_ebus_dev = ebus->self; | 
 |  | 
 | 		spin_lock_init(&sun_pci_fd_ebus_dma.lock); | 
 |  | 
 | 		/* XXX ioremap */ | 
 | 		sun_pci_fd_ebus_dma.regs = (void __iomem *) | 
 | 			edev->resource[1].start; | 
 | 		if (!sun_pci_fd_ebus_dma.regs) | 
 | 			return 0; | 
 |  | 
 | 		sun_pci_fd_ebus_dma.flags = (EBUS_DMA_FLAG_USE_EBDMA_HANDLER | | 
 | 					     EBUS_DMA_FLAG_TCI_DISABLE); | 
 | 		sun_pci_fd_ebus_dma.callback = sun_pci_fd_dma_callback; | 
 | 		sun_pci_fd_ebus_dma.client_cookie = NULL; | 
 | 		sun_pci_fd_ebus_dma.irq = FLOPPY_IRQ; | 
 | 		strcpy(sun_pci_fd_ebus_dma.name, "floppy"); | 
 | 		if (ebus_dma_register(&sun_pci_fd_ebus_dma)) | 
 | 			return 0; | 
 |  | 
 | 		/* XXX ioremap */ | 
 | 		sun_fdc = (struct sun_flpy_controller *)edev->resource[0].start; | 
 |  | 
 | 		sun_fdops.fd_inb = sun_pci_fd_inb; | 
 | 		sun_fdops.fd_outb = sun_pci_fd_outb; | 
 |  | 
 | 		can_use_virtual_dma = use_virtual_dma = 0; | 
 | 		sun_fdops.fd_enable_dma = sun_pci_fd_enable_dma; | 
 | 		sun_fdops.fd_disable_dma = sun_pci_fd_disable_dma; | 
 | 		sun_fdops.fd_set_dma_mode = sun_pci_fd_set_dma_mode; | 
 | 		sun_fdops.fd_set_dma_addr = sun_pci_fd_set_dma_addr; | 
 | 		sun_fdops.fd_set_dma_count = sun_pci_fd_set_dma_count; | 
 | 		sun_fdops.get_dma_residue = sun_pci_get_dma_residue; | 
 |  | 
 | 		sun_fdops.fd_request_irq = sun_pci_fd_request_irq; | 
 | 		sun_fdops.fd_free_irq = sun_pci_fd_free_irq; | 
 |  | 
 | 		sun_fdops.fd_eject = sun_pci_fd_eject; | 
 |  | 
 |         	fdc_status = (unsigned long) &sun_fdc->status_82077; | 
 |  | 
 | 		/* | 
 | 		 * XXX: Find out on which machines this is really needed. | 
 | 		 */ | 
 | 		if (1) { | 
 | 			sun_pci_broken_drive = 1; | 
 | 			sun_fdops.fd_outb = sun_pci_fd_broken_outb; | 
 | 		} | 
 |  | 
 | 		allowed_drive_mask = 0; | 
 | 		if (sun_pci_fd_test_drive((unsigned long)sun_fdc, 0)) | 
 | 			sun_floppy_types[0] = 4; | 
 | 		if (sun_pci_fd_test_drive((unsigned long)sun_fdc, 1)) | 
 | 			sun_floppy_types[1] = 4; | 
 |  | 
 | 		/* | 
 | 		 * Find NS87303 SuperIO config registers (through ecpp). | 
 | 		 */ | 
 | 		for_each_ebus(ebus) { | 
 | 			for_each_ebusdev(edev, ebus) { | 
 | 				if (!strcmp(edev->prom_node->name, "ecpp")) { | 
 | 					config = edev->resource[1].start; | 
 | 					goto config_done; | 
 | 				} | 
 | 			} | 
 | 		} | 
 | 	config_done: | 
 |  | 
 | 		/* | 
 | 		 * Sanity check, is this really the NS87303? | 
 | 		 */ | 
 | 		switch (config & 0x3ff) { | 
 | 		case 0x02e: | 
 | 		case 0x15c: | 
 | 		case 0x26e: | 
 | 		case 0x398: | 
 | 			break; | 
 | 		default: | 
 | 			config = 0; | 
 | 		} | 
 |  | 
 | 		if (!config) | 
 | 			return sun_floppy_types[0]; | 
 |  | 
 | 		/* Enable PC-AT mode. */ | 
 | 		ns87303_modify(config, ASC, 0, 0xc0); | 
 |  | 
 | #ifdef PCI_FDC_SWAP_DRIVES | 
 | 		/* | 
 | 		 * If only Floppy 1 is present, swap drives. | 
 | 		 */ | 
 | 		if (!sun_floppy_types[0] && sun_floppy_types[1]) { | 
 | 			/* | 
 | 			 * Set the drive exchange bit in FCR on NS87303, | 
 | 			 * make sure other bits are sane before doing so. | 
 | 			 */ | 
 | 			ns87303_modify(config, FER, FER_EDM, 0); | 
 | 			ns87303_modify(config, ASC, ASC_DRV2_SEL, 0); | 
 | 			ns87303_modify(config, FCR, 0, FCR_LDE); | 
 |  | 
 | 			config = sun_floppy_types[0]; | 
 | 			sun_floppy_types[0] = sun_floppy_types[1]; | 
 | 			sun_floppy_types[1] = config; | 
 |  | 
 | 			if (sun_pci_broken_drive != -1) { | 
 | 				sun_pci_broken_drive = 1 - sun_pci_broken_drive; | 
 | 				sun_fdops.fd_outb = sun_pci_fd_lde_broken_outb; | 
 | 			} | 
 | 		} | 
 | #endif /* PCI_FDC_SWAP_DRIVES */ | 
 |  | 
 | 		return sun_floppy_types[0]; | 
 | #else | 
 | 		return 0; | 
 | #endif | 
 | 	} | 
 | 	prom_getproperty(sdev->prom_node, "status", state, sizeof(state)); | 
 | 	if(!strncmp(state, "disabled", 8)) | 
 | 		return 0; | 
 |  | 
 | 	/* | 
 | 	 * We cannot do sbus_ioremap here: it does request_region, | 
 | 	 * which the generic floppy driver tries to do once again. | 
 | 	 * But we must use the sdev resource values as they have | 
 | 	 * had parent ranges applied. | 
 | 	 */ | 
 | 	sun_fdc = (struct sun_flpy_controller *) | 
 | 		(sdev->resource[0].start + | 
 | 		 ((sdev->resource[0].flags & 0x1ffUL) << 32UL)); | 
 |  | 
 | 	/* Last minute sanity check... */ | 
 | 	if(sbus_readb(&sun_fdc->status1_82077) == 0xff) { | 
 | 		sun_fdc = (struct sun_flpy_controller *)-1; | 
 | 		return 0; | 
 | 	} | 
 |  | 
 |         sun_fdops.fd_inb = sun_82077_fd_inb; | 
 |         sun_fdops.fd_outb = sun_82077_fd_outb; | 
 |  | 
 | 	can_use_virtual_dma = use_virtual_dma = 1; | 
 | 	sun_fdops.fd_enable_dma = sun_fd_enable_dma; | 
 | 	sun_fdops.fd_disable_dma = sun_fd_disable_dma; | 
 | 	sun_fdops.fd_set_dma_mode = sun_fd_set_dma_mode; | 
 | 	sun_fdops.fd_set_dma_addr = sun_fd_set_dma_addr; | 
 | 	sun_fdops.fd_set_dma_count = sun_fd_set_dma_count; | 
 | 	sun_fdops.get_dma_residue = sun_get_dma_residue; | 
 |  | 
 | 	sun_fdops.fd_request_irq = sun_fd_request_irq; | 
 | 	sun_fdops.fd_free_irq = sun_fd_free_irq; | 
 |  | 
 | 	sun_fdops.fd_eject = sun_fd_eject; | 
 |  | 
 |         fdc_status = (unsigned long) &sun_fdc->status_82077; | 
 |  | 
 | 	/* Success... */ | 
 | 	allowed_drive_mask = 0x01; | 
 | 	sun_floppy_types[0] = 4; | 
 | 	sun_floppy_types[1] = 0; | 
 |  | 
 | 	return sun_floppy_types[0]; | 
 | } | 
 |  | 
 | #define EXTRA_FLOPPY_PARAMS | 
 |  | 
 | static DEFINE_SPINLOCK(dma_spin_lock); | 
 |  | 
 | #define claim_dma_lock() \ | 
 | ({	unsigned long flags; \ | 
 | 	spin_lock_irqsave(&dma_spin_lock, flags); \ | 
 | 	flags; \ | 
 | }) | 
 |  | 
 | #define release_dma_lock(__flags) \ | 
 | 	spin_unlock_irqrestore(&dma_spin_lock, __flags); | 
 |  | 
 | #endif /* !(__ASM_SPARC64_FLOPPY_H) */ |