| ==================================================================== |
| = Adaptec Ultra320 Family Manager Set = |
| = = |
| = README for = |
| = The Linux Operating System = |
| ==================================================================== |
| |
| The following information is available in this file: |
| |
| 1. Supported Hardware |
| 2. Version History |
| 3. Command Line Options |
| 4. Additional Notes |
| 5. Contacting Adaptec |
| |
| |
| 1. Supported Hardware |
| |
| The following Adaptec SCSI Host Adapters are supported by this |
| driver set. |
| |
| Ultra320 ASIC Description |
| ---------------------------------------------------------------- |
| AIC-7901A Single Channel 64-bit PCI-X 133MHz to |
| Ultra320 SCSI ASIC |
| AIC-7901B Single Channel 64-bit PCI-X 133MHz to |
| Ultra320 SCSI ASIC with Retained Training |
| AIC-7902A4 Dual Channel 64-bit PCI-X 133MHz to |
| Ultra320 SCSI ASIC |
| AIC-7902B Dual Channel 64-bit PCI-X 133MHz to |
| Ultra320 SCSI ASIC with Retained Training |
| |
| Ultra320 Adapters Description ASIC |
| -------------------------------------------------------------------------- |
| Adaptec SCSI Card 39320 Dual Channel 64-bit PCI-X 133MHz to 7902A4/7902B |
| Ultra320 SCSI Card (one external |
| 68-pin, two internal 68-pin) |
| Adaptec SCSI Card 39320A Dual Channel 64-bit PCI-X 133MHz to 7902B |
| Ultra320 SCSI Card (one external |
| 68-pin, two internal 68-pin) |
| Adaptec SCSI Card 39320D Dual Channel 64-bit PCI-X 133MHz to 7902A4 |
| Ultra320 SCSI Card (two external VHDC |
| and one internal 68-pin) |
| Adaptec SCSI Card 39320D Dual Channel 64-bit PCI-X 133MHz to 7902A4 |
| Ultra320 SCSI Card (two external VHDC |
| and one internal 68-pin) based on the |
| AIC-7902B ASIC |
| Adaptec SCSI Card 29320 Single Channel 64-bit PCI-X 133MHz to 7901A |
| Ultra320 SCSI Card (one external |
| 68-pin, two internal 68-pin, one |
| internal 50-pin) |
| Adaptec SCSI Card 29320A Single Channel 64-bit PCI-X 133MHz to 7901B |
| Ultra320 SCSI Card (one external |
| 68-pin, two internal 68-pin, one |
| internal 50-pin) |
| Adaptec SCSI Card 29320LP Single Channel 64-bit Low Profile 7901A |
| PCI-X 133MHz to Ultra320 SCSI Card |
| (One external VHDC, one internal |
| 68-pin) |
| Adaptec SCSI Card 29320ALP Single Channel 64-bit Low Profile 7901B |
| PCI-X 133MHz to Ultra320 SCSI Card |
| (One external VHDC, one internal |
| 68-pin) |
| 2. Version History |
| |
| 3.0 (December 1st, 2005) |
| - Updated driver to use SCSI transport class infrastructure |
| - Upported sequencer and core fixes from adaptec released |
| version 2.0.15 of the driver. |
| |
| 1.3.11 (July 11, 2003) |
| - Fix several deadlock issues. |
| - Add 29320ALP and 39320B Id's. |
| |
| 1.3.10 (June 3rd, 2003) |
| - Align the SCB_TAG field on a 16byte boundary. This avoids |
| SCB corruption on some PCI-33 busses. |
| - Correct non-zero luns on Rev B. hardware. |
| - Update for change in 2.5.X SCSI proc FS interface. |
| - When negotiation async via an 8bit WDTR message, send |
| an SDTR with an offset of 0 to be sure the target |
| knows we are async. This works around a firmware defect |
| in the Quantum Atlas 10K. |
| - Implement controller suspend and resume. |
| - Clear PCI error state during driver attach so that we |
| don't disable memory mapped I/O due to a stray write |
| by some other driver probe that occurred before we |
| claimed the controller. |
| |
| 1.3.9 (May 22nd, 2003) |
| - Fix compiler errors. |
| - Remove S/G splitting for segments that cross a 4GB boundary. |
| This is guaranteed not to happen in Linux. |
| - Add support for scsi_report_device_reset() found in |
| 2.5.X kernels. |
| - Add 7901B support. |
| - Simplify handling of the packetized lun Rev A workaround. |
| - Correct and simplify handling of the ignore wide residue |
| message. The previous code would fail to report a residual |
| if the transaction data length was even and we received |
| an IWR message. |
| |
| 1.3.8 (April 29th, 2003) |
| - Fix types accessed via the command line interface code. |
| - Perform a few firmware optimizations. |
| - Fix "Unexpected PKT busfree" errors. |
| - Use a sequencer interrupt to notify the host of |
| commands with bad status. We defer the notification |
| until there are no outstanding selections to ensure |
| that the host is interrupted for as short a time as |
| possible. |
| - Remove pre-2.2.X support. |
| - Add support for new 2.5.X interrupt API. |
| - Correct big-endian architecture support. |
| |
| 1.3.7 (April 16th, 2003) |
| - Use del_timer_sync() to ensure that no timeouts |
| are pending during controller shutdown. |
| - For pre-2.5.X kernels, carefully adjust our segment |
| list size to avoid SCSI malloc pool fragmentation. |
| - Cleanup channel display in our /proc output. |
| - Workaround duplicate device entries in the mid-layer |
| devlice list during add-single-device. |
| |
| 1.3.6 (March 28th, 2003) |
| - Correct a double free in the Domain Validation code. |
| - Correct a reference to free'ed memory during controller |
| shutdown. |
| - Reset the bus on an SE->LVD change. This is required |
| to reset our transceivers. |
| |
| 1.3.5 (March 24th, 2003) |
| - Fix a few register window mode bugs. |
| - Include read streaming in the PPR flags we display in |
| diagnostics as well as /proc. |
| - Add PCI hot plug support for 2.5.X kernels. |
| - Correct default precompensation value for RevA hardware. |
| - Fix Domain Validation thread shutdown. |
| - Add a firmware workaround to make the LED blink |
| brighter during packetized operations on the H2A4. |
| - Correct /proc display of user read streaming settings. |
| - Simplify driver locking by releasing the io_request_lock |
| upon driver entry from the mid-layer. |
| - Cleanup command line parsing and move much of this code |
| to aiclib. |
| |
| 1.3.4 (February 28th, 2003) |
| - Correct a race condition in our error recovery handler. |
| - Allow Test Unit Ready commands to take a full 5 seconds |
| during Domain Validation. |
| |
| 1.3.2 (February 19th, 2003) |
| - Correct a Rev B. regression due to the GEM318 |
| compatibility fix included in 1.3.1. |
| |
| 1.3.1 (February 11th, 2003) |
| - Add support for the 39320A. |
| - Improve recovery for certain PCI-X errors. |
| - Fix handling of LQ/DATA/LQ/DATA for the |
| same write transaction that can occur without |
| interveining training. |
| - Correct compatibility issues with the GEM318 |
| enclosure services device. |
| - Correct data corruption issue that occurred under |
| high tag depth write loads. |
| - Adapt to a change in the 2.5.X daemonize() API. |
| - Correct a "Missing case in ahd_handle_scsiint" panic. |
| |
| 1.3.0 (January 21st, 2003) |
| - Full regression testing for all U320 products completed. |
| - Added abort and target/lun reset error recovery handler and |
| interrupt coalescing. |
| |
| 1.2.0 (November 14th, 2002) |
| - Added support for Domain Validation |
| - Add support for the Hewlett-Packard version of the 39320D |
| and AIC-7902 adapters. |
| Support for previous adapters has not been fully tested and should |
| only be used at the customer's own risk. |
| |
| 1.1.1 (September 24th, 2002) |
| - Added support for the Linux 2.5.X kernel series |
| |
| 1.1.0 (September 17th, 2002) |
| - Added support for four additional SCSI products: |
| ASC-39320, ASC-29320, ASC-29320LP, AIC-7901. |
| |
| 1.0.0 (May 30th, 2002) |
| - Initial driver release. |
| |
| 2.1. Software/Hardware Features |
| - Support for the SPI-4 "Ultra320" standard: |
| - 320MB/s transfer rates |
| - Packetized SCSI Protocol at 160MB/s and 320MB/s |
| - Quick Arbitration Selection (QAS) |
| - Retained Training Information (Rev B. ASIC only) |
| - Interrupt Coalessing |
| - Initiator Mode (target mode not currently |
| supported) |
| - Support for the PCI-X standard up to 133MHz |
| - Support for the PCI v2.2 standard |
| - Domain Validation |
| |
| 2.2. Operating System Support: |
| - Redhat Linux 7.2, 7.3, 8.0, Advanced Server 2.1 |
| - SuSE Linux 7.3, 8.0, 8.1, Enterprise Server 7 |
| - only Intel and AMD x86 supported at this time |
| - >4GB memory configurations supported. |
| |
| Refer to the User's Guide for more details on this. |
| |
| 3. Command Line Options |
| |
| WARNING: ALTERING OR ADDING THESE DRIVER PARAMETERS |
| INCORRECTLY CAN RENDER YOUR SYSTEM INOPERABLE. |
| USE THEM WITH CAUTION. |
| |
| Edit the file "modprobe.conf" in the directory /etc and add/edit a |
| line containing 'options aic79xx aic79xx=[command[,command...]]' where |
| 'command' is one or more of the following: |
| ----------------------------------------------------------------- |
| Option: verbose |
| Definition: enable additional informative messages during |
| driver operation. |
| Possible Values: This option is a flag |
| Default Value: disabled |
| ----------------------------------------------------------------- |
| Option: debug:[value] |
| Definition: Enables various levels of debugging information |
| The bit definitions for the debugging mask can |
| be found in drivers/scsi/aic7xxx/aic79xx.h under |
| the "Debug" heading. |
| Possible Values: 0x0000 = no debugging, 0xffff = full debugging |
| Default Value: 0x0000 |
| ----------------------------------------------------------------- |
| Option: no_reset |
| Definition: Do not reset the bus during the initial probe |
| phase |
| Possible Values: This option is a flag |
| Default Value: disabled |
| ----------------------------------------------------------------- |
| Option: extended |
| Definition: Force extended translation on the controller |
| Possible Values: This option is a flag |
| Default Value: disabled |
| ----------------------------------------------------------------- |
| Option: periodic_otag |
| Definition: Send an ordered tag periodically to prevent |
| tag starvation. Needed for some older devices |
| Possible Values: This option is a flag |
| Default Value: disabled |
| ----------------------------------------------------------------- |
| Option: reverse_scan |
| Definition: Probe the scsi bus in reverse order, starting |
| with target 15 |
| Possible Values: This option is a flag |
| Default Value: disabled |
| ----------------------------------------------------------------- |
| Option: global_tag_depth |
| Definition: Global tag depth for all targets on all busses. |
| This option sets the default tag depth which |
| may be selectively overridden vi the tag_info |
| option. |
| Possible Values: 1 - 253 |
| Default Value: 32 |
| ----------------------------------------------------------------- |
| Option: tag_info:{{value[,value...]}[,{value[,value...]}...]} |
| Definition: Set the per-target tagged queue depth on a |
| per controller basis. Both controllers and targets |
| may be ommitted indicating that they should retain |
| the default tag depth. |
| Examples: tag_info:{{16,32,32,64,8,8,,32,32,32,32,32,32,32,32,32} |
| On Controller 0 |
| specifies a tag depth of 16 for target 0 |
| specifies a tag depth of 64 for target 3 |
| specifies a tag depth of 8 for targets 4 and 5 |
| leaves target 6 at the default |
| specifies a tag depth of 32 for targets 1,2,7-15 |
| All other targets retain the default depth. |
| |
| tag_info:{{},{32,,32}} |
| On Controller 1 |
| specifies a tag depth of 32 for targets 0 and 2 |
| All other targets retain the default depth. |
| |
| Possible Values: 1 - 253 |
| Default Value: 32 |
| ----------------------------------------------------------------- |
| Option: rd_strm: {rd_strm_bitmask[,rd_strm_bitmask...]} |
| Definition: Enable read streaming on a per target basis. |
| The rd_strm_bitmask is a 16 bit hex value in which |
| each bit represents a target. Setting the target's |
| bit to '1' enables read streaming for that |
| target. Controllers may be ommitted indicating that |
| they should retain the default read streaming setting. |
| Example: rd_strm:{0x0041} |
| On Controller 0 |
| enables read streaming for targets 0 and 6. |
| disables read streaming for targets 1-5,7-15. |
| All other targets retain the default read |
| streaming setting. |
| Example: rd_strm:{0x0023,,0xFFFF} |
| On Controller 0 |
| enables read streaming for targets 1,2, and 5. |
| disables read streaming for targets 3,4,6-15. |
| On Controller 2 |
| enables read streaming for all targets. |
| All other targets retain the default read |
| streaming setting. |
| |
| Possible Values: 0x0000 - 0xffff |
| Default Value: 0x0000 |
| ----------------------------------------------------------------- |
| Option: dv: {value[,value...]} |
| Definition: Set Domain Validation Policy on a per-controller basis. |
| Controllers may be ommitted indicating that |
| they should retain the default read streaming setting. |
| Example: dv:{-1,0,,1,1,0} |
| On Controller 0 leave DV at its default setting. |
| On Controller 1 disable DV. |
| Skip configuration on Controller 2. |
| On Controllers 3 and 4 enable DV. |
| On Controller 5 disable DV. |
| |
| Possible Values: < 0 Use setting from serial EEPROM. |
| 0 Disable DV |
| > 0 Enable DV |
| Default Value: DV Serial EEPROM configuration setting. |
| ----------------------------------------------------------------- |
| Option: seltime:[value] |
| Definition: Specifies the selection timeout value |
| Possible Values: 0 = 256ms, 1 = 128ms, 2 = 64ms, 3 = 32ms |
| Default Value: 0 |
| ----------------------------------------------------------------- |
| |
| *** The following three options should only be changed at *** |
| *** the direction of a technical support representative. *** |
| |
| ----------------------------------------------------------------- |
| Option: precomp: {value[,value...]} |
| Definition: Set IO Cell precompensation value on a per-controller |
| basis. |
| Controllers may be ommitted indicating that |
| they should retain the default precompensation setting. |
| Example: precomp:{0x1} |
| On Controller 0 set precompensation to 1. |
| Example: precomp:{1,,7} |
| On Controller 0 set precompensation to 1. |
| On Controller 2 set precompensation to 8. |
| |
| Possible Values: 0 - 7 |
| Default Value: Varies based on chip revision |
| ----------------------------------------------------------------- |
| Option: slewrate: {value[,value...]} |
| Definition: Set IO Cell slew rate on a per-controller basis. |
| Controllers may be ommitted indicating that |
| they should retain the default slew rate setting. |
| Example: slewrate:{0x1} |
| On Controller 0 set slew rate to 1. |
| Example: slewrate :{1,,8} |
| On Controller 0 set slew rate to 1. |
| On Controller 2 set slew rate to 8. |
| |
| Possible Values: 0 - 15 |
| Default Value: Varies based on chip revision |
| ----------------------------------------------------------------- |
| Option: amplitude: {value[,value...]} |
| Definition: Set IO Cell signal amplitude on a per-controller basis. |
| Controllers may be ommitted indicating that |
| they should retain the default read streaming setting. |
| Example: amplitude:{0x1} |
| On Controller 0 set amplitude to 1. |
| Example: amplitude :{1,,7} |
| On Controller 0 set amplitude to 1. |
| On Controller 2 set amplitude to 7. |
| |
| Possible Values: 1 - 7 |
| Default Value: Varies based on chip revision |
| ----------------------------------------------------------------- |
| |
| Example: 'options aic79xx aic79xx=verbose,rd_strm:{{0x0041}}' |
| enables verbose output in the driver and turns read streaming on |
| for targets 0 and 6 of Controller 0. |
| |
| 4. Additional Notes |
| |
| 4.1. Known/Unresolved or FYI Issues |
| |
| * Under SuSE Linux Enterprise 7, the driver may fail to operate |
| correctly due to a problem with PCI interrupt routing in the |
| Linux kernel. Please contact SuSE for an updated Linux |
| kernel. |
| |
| 4.2. Third-Party Compatibility Issues |
| |
| * Adaptec only supports Ultra320 hard drives running |
| the latest firmware available. Please check with |
| your hard drive manufacturer to ensure you have the |
| latest version. |
| |
| 4.3. Operating System or Technology Limitations |
| |
| * PCI Hot Plug is untested and may cause the operating system |
| to stop responding. |
| * Luns that are not numbered contiguously starting with 0 might not |
| be automatically probed during system startup. This is a limitation |
| of the OS. Please contact your Linux vendor for instructions on |
| manually probing non-contiguous luns. |
| * Using the Driver Update Disk version of this package during OS |
| installation under RedHat might result in two versions of this |
| driver being installed into the system module directory. This |
| might cause problems with the /sbin/mkinitrd program and/or |
| other RPM packages that try to install system modules. The best |
| way to correct this once the system is running is to install |
| the latest RPM package version of this driver, available from |
| http://www.adaptec.com. |
| |
| |
| 5. Adaptec Customer Support |
| |
| A Technical Support Identification (TSID) Number is required for |
| Adaptec technical support. |
| - The 12-digit TSID can be found on the white barcode-type label |
| included inside the box with your product. The TSID helps us |
| provide more efficient service by accurately identifying your |
| product and support status. |
| |
| Support Options |
| - Search the Adaptec Support Knowledgebase (ASK) at |
| http://ask.adaptec.com for articles, troubleshooting tips, and |
| frequently asked questions about your product. |
| - For support via Email, submit your question to Adaptec's |
| Technical Support Specialists at http://ask.adaptec.com/. |
| |
| North America |
| - Visit our Web site at http://www.adaptec.com/. |
| - For information about Adaptec's support options, call |
| 408-957-2550, 24 hours a day, 7 days a week. |
| - To speak with a Technical Support Specialist, |
| * For hardware products, call 408-934-7274, |
| Monday to Friday, 3:00 am to 5:00 pm, PDT. |
| * For RAID and Fibre Channel products, call 321-207-2000, |
| Monday to Friday, 3:00 am to 5:00 pm, PDT. |
| To expedite your service, have your computer with you. |
| - To order Adaptec products, including accessories and cables, |
| call 408-957-7274. To order cables online go to |
| http://www.adaptec.com/buy-cables/. |
| |
| Europe |
| - Visit our Web site at http://www.adaptec-europe.com/. |
| - To speak with a Technical Support Specialist, call, or email, |
| * German: +49 89 4366 5522, Monday-Friday, 9:00-17:00 CET, |
| http://ask-de.adaptec.com/. |
| * French: +49 89 4366 5533, Monday-Friday, 9:00-17:00 CET, |
| http://ask-fr.adaptec.com/. |
| * English: +49 89 4366 5544, Monday-Friday, 9:00-17:00 GMT, |
| http://ask.adaptec.com/. |
| - You can order Adaptec cables online at |
| http://www.adaptec.com/buy-cables/. |
| |
| Japan |
| - Visit our web site at http://www.adaptec.co.jp/. |
| - To speak with a Technical Support Specialist, call |
| +81 3 5308 6120, Monday-Friday, 9:00 a.m. to 12:00 p.m., |
| 1:00 p.m. to 6:00 p.m. |
| |
| ------------------------------------------------------------------- |
| /* |
| * Copyright (c) 2003 Adaptec Inc. 691 S. Milpitas Blvd., Milpitas CA 95035 USA. |
| * All rights reserved. |
| * |
| * You are permitted to redistribute, use and modify this README file in whole |
| * or in part in conjunction with redistribution of software governed by the |
| * General Public License, provided that the following conditions are met: |
| * 1. Redistributions of README file must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. The name of the author may not be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * 3. Modifications or new contributions must be attributed in a copyright |
| * notice identifying the author ("Contributor") and added below the |
| * original copyright notice. The copyright notice is for purposes of |
| * identifying contributors and should not be deemed as permission to alter |
| * the permissions given by Adaptec. |
| * |
| * THIS README FILE IS PROVIDED BY ADAPTEC AND CONTRIBUTORS ``AS IS'' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ANY |
| * WARRANTIES OF NON-INFRINGEMENT OR THE IMPLIED WARRANTIES OF MERCHANTABILITY |
| * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL |
| * ADAPTEC OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED |
| * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR |
| * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF |
| * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING |
| * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS README |
| * FILE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |