| /* |
| * uvc_queue.c -- USB Video Class driver - Buffers management |
| * |
| * Copyright (C) 2005-2008 |
| * Laurent Pinchart (laurent.pinchart@skynet.be) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/version.h> |
| #include <linux/list.h> |
| #include <linux/module.h> |
| #include <linux/usb.h> |
| #include <linux/videodev2.h> |
| #include <linux/vmalloc.h> |
| #include <linux/wait.h> |
| #include <asm/atomic.h> |
| |
| #include "uvcvideo.h" |
| |
| /* ------------------------------------------------------------------------ |
| * Video buffers queue management. |
| * |
| * Video queues is initialized by uvc_queue_init(). The function performs |
| * basic initialization of the uvc_video_queue struct and never fails. |
| * |
| * Video buffer allocation and freeing are performed by uvc_alloc_buffers and |
| * uvc_free_buffers respectively. The former acquires the video queue lock, |
| * while the later must be called with the lock held (so that allocation can |
| * free previously allocated buffers). Trying to free buffers that are mapped |
| * to user space will return -EBUSY. |
| * |
| * Video buffers are managed using two queues. However, unlike most USB video |
| * drivers which use an in queue and an out queue, we use a main queue which |
| * holds all queued buffers (both 'empty' and 'done' buffers), and an irq |
| * queue which holds empty buffers. This design (copied from video-buf) |
| * minimizes locking in interrupt, as only one queue is shared between |
| * interrupt and user contexts. |
| * |
| * Use cases |
| * --------- |
| * |
| * Unless stated otherwise, all operations which modify the irq buffers queue |
| * are protected by the irq spinlock. |
| * |
| * 1. The user queues the buffers, starts streaming and dequeues a buffer. |
| * |
| * The buffers are added to the main and irq queues. Both operations are |
| * protected by the queue lock, and the latert is protected by the irq |
| * spinlock as well. |
| * |
| * The completion handler fetches a buffer from the irq queue and fills it |
| * with video data. If no buffer is available (irq queue empty), the handler |
| * returns immediately. |
| * |
| * When the buffer is full, the completion handler removes it from the irq |
| * queue, marks it as ready (UVC_BUF_STATE_DONE) and wake its wait queue. |
| * At that point, any process waiting on the buffer will be woken up. If a |
| * process tries to dequeue a buffer after it has been marked ready, the |
| * dequeing will succeed immediately. |
| * |
| * 2. Buffers are queued, user is waiting on a buffer and the device gets |
| * disconnected. |
| * |
| * When the device is disconnected, the kernel calls the completion handler |
| * with an appropriate status code. The handler marks all buffers in the |
| * irq queue as being erroneous (UVC_BUF_STATE_ERROR) and wakes them up so |
| * that any process waiting on a buffer gets woken up. |
| * |
| * Waking up up the first buffer on the irq list is not enough, as the |
| * process waiting on the buffer might restart the dequeue operation |
| * immediately. |
| * |
| */ |
| |
| void uvc_queue_init(struct uvc_video_queue *queue) |
| { |
| mutex_init(&queue->mutex); |
| spin_lock_init(&queue->irqlock); |
| INIT_LIST_HEAD(&queue->mainqueue); |
| INIT_LIST_HEAD(&queue->irqqueue); |
| } |
| |
| /* |
| * Allocate the video buffers. |
| * |
| * Pages are reserved to make sure they will not be swaped, as they will be |
| * filled in URB completion handler. |
| * |
| * Buffers will be individually mapped, so they must all be page aligned. |
| */ |
| int uvc_alloc_buffers(struct uvc_video_queue *queue, unsigned int nbuffers, |
| unsigned int buflength) |
| { |
| unsigned int bufsize = PAGE_ALIGN(buflength); |
| unsigned int i; |
| void *mem = NULL; |
| int ret; |
| |
| if (nbuffers > UVC_MAX_VIDEO_BUFFERS) |
| nbuffers = UVC_MAX_VIDEO_BUFFERS; |
| |
| mutex_lock(&queue->mutex); |
| |
| if ((ret = uvc_free_buffers(queue)) < 0) |
| goto done; |
| |
| /* Bail out if no buffers should be allocated. */ |
| if (nbuffers == 0) |
| goto done; |
| |
| /* Decrement the number of buffers until allocation succeeds. */ |
| for (; nbuffers > 0; --nbuffers) { |
| mem = vmalloc_32(nbuffers * bufsize); |
| if (mem != NULL) |
| break; |
| } |
| |
| if (mem == NULL) { |
| ret = -ENOMEM; |
| goto done; |
| } |
| |
| for (i = 0; i < nbuffers; ++i) { |
| memset(&queue->buffer[i], 0, sizeof queue->buffer[i]); |
| queue->buffer[i].buf.index = i; |
| queue->buffer[i].buf.m.offset = i * bufsize; |
| queue->buffer[i].buf.length = buflength; |
| queue->buffer[i].buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| queue->buffer[i].buf.sequence = 0; |
| queue->buffer[i].buf.field = V4L2_FIELD_NONE; |
| queue->buffer[i].buf.memory = V4L2_MEMORY_MMAP; |
| queue->buffer[i].buf.flags = 0; |
| init_waitqueue_head(&queue->buffer[i].wait); |
| } |
| |
| queue->mem = mem; |
| queue->count = nbuffers; |
| queue->buf_size = bufsize; |
| ret = nbuffers; |
| |
| done: |
| mutex_unlock(&queue->mutex); |
| return ret; |
| } |
| |
| /* |
| * Free the video buffers. |
| * |
| * This function must be called with the queue lock held. |
| */ |
| int uvc_free_buffers(struct uvc_video_queue *queue) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < queue->count; ++i) { |
| if (queue->buffer[i].vma_use_count != 0) |
| return -EBUSY; |
| } |
| |
| if (queue->count) { |
| vfree(queue->mem); |
| queue->count = 0; |
| } |
| |
| return 0; |
| } |
| |
| static void __uvc_query_buffer(struct uvc_buffer *buf, |
| struct v4l2_buffer *v4l2_buf) |
| { |
| memcpy(v4l2_buf, &buf->buf, sizeof *v4l2_buf); |
| |
| if (buf->vma_use_count) |
| v4l2_buf->flags |= V4L2_BUF_FLAG_MAPPED; |
| |
| switch (buf->state) { |
| case UVC_BUF_STATE_ERROR: |
| case UVC_BUF_STATE_DONE: |
| v4l2_buf->flags |= V4L2_BUF_FLAG_DONE; |
| break; |
| case UVC_BUF_STATE_QUEUED: |
| case UVC_BUF_STATE_ACTIVE: |
| v4l2_buf->flags |= V4L2_BUF_FLAG_QUEUED; |
| break; |
| case UVC_BUF_STATE_IDLE: |
| default: |
| break; |
| } |
| } |
| |
| int uvc_query_buffer(struct uvc_video_queue *queue, |
| struct v4l2_buffer *v4l2_buf) |
| { |
| int ret = 0; |
| |
| mutex_lock(&queue->mutex); |
| if (v4l2_buf->index >= queue->count) { |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| __uvc_query_buffer(&queue->buffer[v4l2_buf->index], v4l2_buf); |
| |
| done: |
| mutex_unlock(&queue->mutex); |
| return ret; |
| } |
| |
| /* |
| * Queue a video buffer. Attempting to queue a buffer that has already been |
| * queued will return -EINVAL. |
| */ |
| int uvc_queue_buffer(struct uvc_video_queue *queue, |
| struct v4l2_buffer *v4l2_buf) |
| { |
| struct uvc_buffer *buf; |
| unsigned long flags; |
| int ret = 0; |
| |
| uvc_trace(UVC_TRACE_CAPTURE, "Queuing buffer %u.\n", v4l2_buf->index); |
| |
| if (v4l2_buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || |
| v4l2_buf->memory != V4L2_MEMORY_MMAP) { |
| uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer type (%u) " |
| "and/or memory (%u).\n", v4l2_buf->type, |
| v4l2_buf->memory); |
| return -EINVAL; |
| } |
| |
| mutex_lock(&queue->mutex); |
| if (v4l2_buf->index >= queue->count) { |
| uvc_trace(UVC_TRACE_CAPTURE, "[E] Out of range index.\n"); |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| buf = &queue->buffer[v4l2_buf->index]; |
| if (buf->state != UVC_BUF_STATE_IDLE) { |
| uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer state " |
| "(%u).\n", buf->state); |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| spin_lock_irqsave(&queue->irqlock, flags); |
| if (queue->flags & UVC_QUEUE_DISCONNECTED) { |
| spin_unlock_irqrestore(&queue->irqlock, flags); |
| ret = -ENODEV; |
| goto done; |
| } |
| buf->state = UVC_BUF_STATE_QUEUED; |
| buf->buf.bytesused = 0; |
| list_add_tail(&buf->stream, &queue->mainqueue); |
| list_add_tail(&buf->queue, &queue->irqqueue); |
| spin_unlock_irqrestore(&queue->irqlock, flags); |
| |
| done: |
| mutex_unlock(&queue->mutex); |
| return ret; |
| } |
| |
| static int uvc_queue_waiton(struct uvc_buffer *buf, int nonblocking) |
| { |
| if (nonblocking) { |
| return (buf->state != UVC_BUF_STATE_QUEUED && |
| buf->state != UVC_BUF_STATE_ACTIVE) |
| ? 0 : -EAGAIN; |
| } |
| |
| return wait_event_interruptible(buf->wait, |
| buf->state != UVC_BUF_STATE_QUEUED && |
| buf->state != UVC_BUF_STATE_ACTIVE); |
| } |
| |
| /* |
| * Dequeue a video buffer. If nonblocking is false, block until a buffer is |
| * available. |
| */ |
| int uvc_dequeue_buffer(struct uvc_video_queue *queue, |
| struct v4l2_buffer *v4l2_buf, int nonblocking) |
| { |
| struct uvc_buffer *buf; |
| int ret = 0; |
| |
| if (v4l2_buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || |
| v4l2_buf->memory != V4L2_MEMORY_MMAP) { |
| uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer type (%u) " |
| "and/or memory (%u).\n", v4l2_buf->type, |
| v4l2_buf->memory); |
| return -EINVAL; |
| } |
| |
| mutex_lock(&queue->mutex); |
| if (list_empty(&queue->mainqueue)) { |
| uvc_trace(UVC_TRACE_CAPTURE, "[E] Empty buffer queue.\n"); |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| buf = list_first_entry(&queue->mainqueue, struct uvc_buffer, stream); |
| if ((ret = uvc_queue_waiton(buf, nonblocking)) < 0) |
| goto done; |
| |
| uvc_trace(UVC_TRACE_CAPTURE, "Dequeuing buffer %u (%u, %u bytes).\n", |
| buf->buf.index, buf->state, buf->buf.bytesused); |
| |
| switch (buf->state) { |
| case UVC_BUF_STATE_ERROR: |
| uvc_trace(UVC_TRACE_CAPTURE, "[W] Corrupted data " |
| "(transmission error).\n"); |
| ret = -EIO; |
| case UVC_BUF_STATE_DONE: |
| buf->state = UVC_BUF_STATE_IDLE; |
| break; |
| |
| case UVC_BUF_STATE_IDLE: |
| case UVC_BUF_STATE_QUEUED: |
| case UVC_BUF_STATE_ACTIVE: |
| default: |
| uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer state %u " |
| "(driver bug?).\n", buf->state); |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| list_del(&buf->stream); |
| __uvc_query_buffer(buf, v4l2_buf); |
| |
| done: |
| mutex_unlock(&queue->mutex); |
| return ret; |
| } |
| |
| /* |
| * Poll the video queue. |
| * |
| * This function implements video queue polling and is intended to be used by |
| * the device poll handler. |
| */ |
| unsigned int uvc_queue_poll(struct uvc_video_queue *queue, struct file *file, |
| poll_table *wait) |
| { |
| struct uvc_buffer *buf; |
| unsigned int mask = 0; |
| |
| mutex_lock(&queue->mutex); |
| if (list_empty(&queue->mainqueue)) { |
| mask |= POLLERR; |
| goto done; |
| } |
| buf = list_first_entry(&queue->mainqueue, struct uvc_buffer, stream); |
| |
| poll_wait(file, &buf->wait, wait); |
| if (buf->state == UVC_BUF_STATE_DONE || |
| buf->state == UVC_BUF_STATE_ERROR) |
| mask |= POLLIN | POLLRDNORM; |
| |
| done: |
| mutex_unlock(&queue->mutex); |
| return mask; |
| } |
| |
| /* |
| * Enable or disable the video buffers queue. |
| * |
| * The queue must be enabled before starting video acquisition and must be |
| * disabled after stopping it. This ensures that the video buffers queue |
| * state can be properly initialized before buffers are accessed from the |
| * interrupt handler. |
| * |
| * Enabling the video queue initializes parameters (such as sequence number, |
| * sync pattern, ...). If the queue is already enabled, return -EBUSY. |
| * |
| * Disabling the video queue cancels the queue and removes all buffers from |
| * the main queue. |
| * |
| * This function can't be called from interrupt context. Use |
| * uvc_queue_cancel() instead. |
| */ |
| int uvc_queue_enable(struct uvc_video_queue *queue, int enable) |
| { |
| unsigned int i; |
| int ret = 0; |
| |
| mutex_lock(&queue->mutex); |
| if (enable) { |
| if (uvc_queue_streaming(queue)) { |
| ret = -EBUSY; |
| goto done; |
| } |
| queue->sequence = 0; |
| queue->flags |= UVC_QUEUE_STREAMING; |
| } else { |
| uvc_queue_cancel(queue, 0); |
| INIT_LIST_HEAD(&queue->mainqueue); |
| |
| for (i = 0; i < queue->count; ++i) |
| queue->buffer[i].state = UVC_BUF_STATE_IDLE; |
| |
| queue->flags &= ~UVC_QUEUE_STREAMING; |
| } |
| |
| done: |
| mutex_unlock(&queue->mutex); |
| return ret; |
| } |
| |
| /* |
| * Cancel the video buffers queue. |
| * |
| * Cancelling the queue marks all buffers on the irq queue as erroneous, |
| * wakes them up and remove them from the queue. |
| * |
| * If the disconnect parameter is set, further calls to uvc_queue_buffer will |
| * fail with -ENODEV. |
| * |
| * This function acquires the irq spinlock and can be called from interrupt |
| * context. |
| */ |
| void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect) |
| { |
| struct uvc_buffer *buf; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&queue->irqlock, flags); |
| while (!list_empty(&queue->irqqueue)) { |
| buf = list_first_entry(&queue->irqqueue, struct uvc_buffer, |
| queue); |
| list_del(&buf->queue); |
| buf->state = UVC_BUF_STATE_ERROR; |
| wake_up(&buf->wait); |
| } |
| /* This must be protected by the irqlock spinlock to avoid race |
| * conditions between uvc_queue_buffer and the disconnection event that |
| * could result in an interruptible wait in uvc_dequeue_buffer. Do not |
| * blindly replace this logic by checking for the UVC_DEV_DISCONNECTED |
| * state outside the queue code. |
| */ |
| if (disconnect) |
| queue->flags |= UVC_QUEUE_DISCONNECTED; |
| spin_unlock_irqrestore(&queue->irqlock, flags); |
| } |
| |
| struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue, |
| struct uvc_buffer *buf) |
| { |
| struct uvc_buffer *nextbuf; |
| unsigned long flags; |
| |
| if ((queue->flags & UVC_QUEUE_DROP_INCOMPLETE) && |
| buf->buf.length != buf->buf.bytesused) { |
| buf->state = UVC_BUF_STATE_QUEUED; |
| buf->buf.bytesused = 0; |
| return buf; |
| } |
| |
| spin_lock_irqsave(&queue->irqlock, flags); |
| list_del(&buf->queue); |
| if (!list_empty(&queue->irqqueue)) |
| nextbuf = list_first_entry(&queue->irqqueue, struct uvc_buffer, |
| queue); |
| else |
| nextbuf = NULL; |
| spin_unlock_irqrestore(&queue->irqlock, flags); |
| |
| buf->buf.sequence = queue->sequence++; |
| do_gettimeofday(&buf->buf.timestamp); |
| |
| wake_up(&buf->wait); |
| return nextbuf; |
| } |