| /* |
| * CompactPCI Hot Plug Driver |
| * |
| * Copyright (C) 2002,2005 SOMA Networks, Inc. |
| * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com) |
| * Copyright (C) 2001 IBM Corp. |
| * |
| * All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or (at |
| * your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or |
| * NON INFRINGEMENT. See the GNU General Public License for more |
| * details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| * Send feedback to <scottm@somanetworks.com> |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/pci.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/smp_lock.h> |
| #include <asm/atomic.h> |
| #include <linux/delay.h> |
| #include "pci_hotplug.h" |
| #include "cpci_hotplug.h" |
| |
| #define DRIVER_AUTHOR "Scott Murray <scottm@somanetworks.com>" |
| #define DRIVER_DESC "CompactPCI Hot Plug Core" |
| |
| #define MY_NAME "cpci_hotplug" |
| |
| #define dbg(format, arg...) \ |
| do { \ |
| if (cpci_debug) \ |
| printk (KERN_DEBUG "%s: " format "\n", \ |
| MY_NAME , ## arg); \ |
| } while (0) |
| #define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME , ## arg) |
| #define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg) |
| #define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME , ## arg) |
| |
| /* local variables */ |
| static DECLARE_RWSEM(list_rwsem); |
| static LIST_HEAD(slot_list); |
| static int slots; |
| static atomic_t extracting; |
| int cpci_debug; |
| static struct cpci_hp_controller *controller; |
| static struct semaphore event_semaphore; /* mutex for process loop (up if something to process) */ |
| static struct semaphore thread_exit; /* guard ensure thread has exited before calling it quits */ |
| static int thread_finished = 1; |
| |
| static int enable_slot(struct hotplug_slot *slot); |
| static int disable_slot(struct hotplug_slot *slot); |
| static int set_attention_status(struct hotplug_slot *slot, u8 value); |
| static int get_power_status(struct hotplug_slot *slot, u8 * value); |
| static int get_attention_status(struct hotplug_slot *slot, u8 * value); |
| static int get_adapter_status(struct hotplug_slot *slot, u8 * value); |
| static int get_latch_status(struct hotplug_slot *slot, u8 * value); |
| |
| static struct hotplug_slot_ops cpci_hotplug_slot_ops = { |
| .owner = THIS_MODULE, |
| .enable_slot = enable_slot, |
| .disable_slot = disable_slot, |
| .set_attention_status = set_attention_status, |
| .get_power_status = get_power_status, |
| .get_attention_status = get_attention_status, |
| .get_adapter_status = get_adapter_status, |
| .get_latch_status = get_latch_status, |
| }; |
| |
| static int |
| update_latch_status(struct hotplug_slot *hotplug_slot, u8 value) |
| { |
| struct hotplug_slot_info info; |
| |
| memcpy(&info, hotplug_slot->info, sizeof(struct hotplug_slot_info)); |
| info.latch_status = value; |
| return pci_hp_change_slot_info(hotplug_slot, &info); |
| } |
| |
| static int |
| update_adapter_status(struct hotplug_slot *hotplug_slot, u8 value) |
| { |
| struct hotplug_slot_info info; |
| |
| memcpy(&info, hotplug_slot->info, sizeof(struct hotplug_slot_info)); |
| info.adapter_status = value; |
| return pci_hp_change_slot_info(hotplug_slot, &info); |
| } |
| |
| static int |
| enable_slot(struct hotplug_slot *hotplug_slot) |
| { |
| struct slot *slot = hotplug_slot->private; |
| int retval = 0; |
| |
| dbg("%s - physical_slot = %s", __FUNCTION__, hotplug_slot->name); |
| |
| if (controller->ops->set_power) |
| retval = controller->ops->set_power(slot, 1); |
| return retval; |
| } |
| |
| static int |
| disable_slot(struct hotplug_slot *hotplug_slot) |
| { |
| struct slot *slot = hotplug_slot->private; |
| int retval = 0; |
| |
| dbg("%s - physical_slot = %s", __FUNCTION__, hotplug_slot->name); |
| |
| down_write(&list_rwsem); |
| |
| /* Unconfigure device */ |
| dbg("%s - unconfiguring slot %s", |
| __FUNCTION__, slot->hotplug_slot->name); |
| if ((retval = cpci_unconfigure_slot(slot))) { |
| err("%s - could not unconfigure slot %s", |
| __FUNCTION__, slot->hotplug_slot->name); |
| goto disable_error; |
| } |
| dbg("%s - finished unconfiguring slot %s", |
| __FUNCTION__, slot->hotplug_slot->name); |
| |
| /* Clear EXT (by setting it) */ |
| if (cpci_clear_ext(slot)) { |
| err("%s - could not clear EXT for slot %s", |
| __FUNCTION__, slot->hotplug_slot->name); |
| retval = -ENODEV; |
| goto disable_error; |
| } |
| cpci_led_on(slot); |
| |
| if (controller->ops->set_power) |
| if ((retval = controller->ops->set_power(slot, 0))) |
| goto disable_error; |
| |
| if (update_adapter_status(slot->hotplug_slot, 0)) |
| warn("failure to update adapter file"); |
| |
| if (slot->extracting) { |
| slot->extracting = 0; |
| atomic_dec(&extracting); |
| } |
| disable_error: |
| up_write(&list_rwsem); |
| return retval; |
| } |
| |
| static u8 |
| cpci_get_power_status(struct slot *slot) |
| { |
| u8 power = 1; |
| |
| if (controller->ops->get_power) |
| power = controller->ops->get_power(slot); |
| return power; |
| } |
| |
| static int |
| get_power_status(struct hotplug_slot *hotplug_slot, u8 * value) |
| { |
| struct slot *slot = hotplug_slot->private; |
| |
| *value = cpci_get_power_status(slot); |
| return 0; |
| } |
| |
| static int |
| get_attention_status(struct hotplug_slot *hotplug_slot, u8 * value) |
| { |
| struct slot *slot = hotplug_slot->private; |
| |
| *value = cpci_get_attention_status(slot); |
| return 0; |
| } |
| |
| static int |
| set_attention_status(struct hotplug_slot *hotplug_slot, u8 status) |
| { |
| return cpci_set_attention_status(hotplug_slot->private, status); |
| } |
| |
| static int |
| get_adapter_status(struct hotplug_slot *hotplug_slot, u8 * value) |
| { |
| *value = hotplug_slot->info->adapter_status; |
| return 0; |
| } |
| |
| static int |
| get_latch_status(struct hotplug_slot *hotplug_slot, u8 * value) |
| { |
| *value = hotplug_slot->info->latch_status; |
| return 0; |
| } |
| |
| static void release_slot(struct hotplug_slot *hotplug_slot) |
| { |
| struct slot *slot = hotplug_slot->private; |
| |
| kfree(slot->hotplug_slot->info); |
| kfree(slot->hotplug_slot->name); |
| kfree(slot->hotplug_slot); |
| kfree(slot); |
| } |
| |
| #define SLOT_NAME_SIZE 6 |
| static void |
| make_slot_name(struct slot *slot) |
| { |
| snprintf(slot->hotplug_slot->name, |
| SLOT_NAME_SIZE, "%02x:%02x", slot->bus->number, slot->number); |
| } |
| |
| int |
| cpci_hp_register_bus(struct pci_bus *bus, u8 first, u8 last) |
| { |
| struct slot *slot; |
| struct hotplug_slot *hotplug_slot; |
| struct hotplug_slot_info *info; |
| char *name; |
| int status = -ENOMEM; |
| int i; |
| |
| if (!(controller && bus)) |
| return -ENODEV; |
| |
| /* |
| * Create a structure for each slot, and register that slot |
| * with the pci_hotplug subsystem. |
| */ |
| for (i = first; i <= last; ++i) { |
| slot = kmalloc(sizeof (struct slot), GFP_KERNEL); |
| if (!slot) |
| goto error; |
| memset(slot, 0, sizeof (struct slot)); |
| |
| hotplug_slot = |
| kmalloc(sizeof (struct hotplug_slot), GFP_KERNEL); |
| if (!hotplug_slot) |
| goto error_slot; |
| memset(hotplug_slot, 0, sizeof (struct hotplug_slot)); |
| slot->hotplug_slot = hotplug_slot; |
| |
| info = kmalloc(sizeof (struct hotplug_slot_info), GFP_KERNEL); |
| if (!info) |
| goto error_hpslot; |
| memset(info, 0, sizeof (struct hotplug_slot_info)); |
| hotplug_slot->info = info; |
| |
| name = kmalloc(SLOT_NAME_SIZE, GFP_KERNEL); |
| if (!name) |
| goto error_info; |
| hotplug_slot->name = name; |
| |
| slot->bus = bus; |
| slot->number = i; |
| slot->devfn = PCI_DEVFN(i, 0); |
| |
| hotplug_slot->private = slot; |
| hotplug_slot->release = &release_slot; |
| make_slot_name(slot); |
| hotplug_slot->ops = &cpci_hotplug_slot_ops; |
| |
| /* |
| * Initialize the slot info structure with some known |
| * good values. |
| */ |
| dbg("initializing slot %s", slot->hotplug_slot->name); |
| info->power_status = cpci_get_power_status(slot); |
| info->attention_status = cpci_get_attention_status(slot); |
| |
| dbg("registering slot %s", slot->hotplug_slot->name); |
| status = pci_hp_register(slot->hotplug_slot); |
| if (status) { |
| err("pci_hp_register failed with error %d", status); |
| goto error_name; |
| } |
| |
| /* Add slot to our internal list */ |
| down_write(&list_rwsem); |
| list_add(&slot->slot_list, &slot_list); |
| slots++; |
| up_write(&list_rwsem); |
| } |
| return 0; |
| error_name: |
| kfree(name); |
| error_info: |
| kfree(info); |
| error_hpslot: |
| kfree(hotplug_slot); |
| error_slot: |
| kfree(slot); |
| error: |
| return status; |
| } |
| |
| int |
| cpci_hp_unregister_bus(struct pci_bus *bus) |
| { |
| struct slot *slot; |
| struct slot *tmp; |
| int status = 0; |
| |
| down_write(&list_rwsem); |
| if (!slots) { |
| up_write(&list_rwsem); |
| return -1; |
| } |
| list_for_each_entry_safe(slot, tmp, &slot_list, slot_list) { |
| if (slot->bus == bus) { |
| list_del(&slot->slot_list); |
| slots--; |
| |
| dbg("deregistering slot %s", slot->hotplug_slot->name); |
| status = pci_hp_deregister(slot->hotplug_slot); |
| if (status) { |
| err("pci_hp_deregister failed with error %d", |
| status); |
| break; |
| } |
| } |
| } |
| up_write(&list_rwsem); |
| return status; |
| } |
| |
| /* This is the interrupt mode interrupt handler */ |
| static irqreturn_t |
| cpci_hp_intr(int irq, void *data, struct pt_regs *regs) |
| { |
| dbg("entered cpci_hp_intr"); |
| |
| /* Check to see if it was our interrupt */ |
| if ((controller->irq_flags & SA_SHIRQ) && |
| !controller->ops->check_irq(controller->dev_id)) { |
| dbg("exited cpci_hp_intr, not our interrupt"); |
| return IRQ_NONE; |
| } |
| |
| /* Disable ENUM interrupt */ |
| controller->ops->disable_irq(); |
| |
| /* Trigger processing by the event thread */ |
| dbg("Signal event_semaphore"); |
| up(&event_semaphore); |
| dbg("exited cpci_hp_intr"); |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * According to PICMG 2.1 R2.0, section 6.3.2, upon |
| * initialization, the system driver shall clear the |
| * INS bits of the cold-inserted devices. |
| */ |
| static int |
| init_slots(int clear_ins) |
| { |
| struct slot *slot; |
| struct pci_dev* dev; |
| |
| dbg("%s - enter", __FUNCTION__); |
| down_read(&list_rwsem); |
| if (!slots) { |
| up_read(&list_rwsem); |
| return -1; |
| } |
| list_for_each_entry(slot, &slot_list, slot_list) { |
| dbg("%s - looking at slot %s", |
| __FUNCTION__, slot->hotplug_slot->name); |
| if (clear_ins && cpci_check_and_clear_ins(slot)) |
| dbg("%s - cleared INS for slot %s", |
| __FUNCTION__, slot->hotplug_slot->name); |
| dev = pci_get_slot(slot->bus, PCI_DEVFN(slot->number, 0)); |
| if (dev) { |
| if (update_adapter_status(slot->hotplug_slot, 1)) |
| warn("failure to update adapter file"); |
| if (update_latch_status(slot->hotplug_slot, 1)) |
| warn("failure to update latch file"); |
| slot->dev = dev; |
| } |
| } |
| up_read(&list_rwsem); |
| dbg("%s - exit", __FUNCTION__); |
| return 0; |
| } |
| |
| static int |
| check_slots(void) |
| { |
| struct slot *slot; |
| int extracted; |
| int inserted; |
| u16 hs_csr; |
| |
| down_read(&list_rwsem); |
| if (!slots) { |
| up_read(&list_rwsem); |
| err("no slots registered, shutting down"); |
| return -1; |
| } |
| extracted = inserted = 0; |
| list_for_each_entry(slot, &slot_list, slot_list) { |
| dbg("%s - looking at slot %s", |
| __FUNCTION__, slot->hotplug_slot->name); |
| if (cpci_check_and_clear_ins(slot)) { |
| /* |
| * Some broken hardware (e.g. PLX 9054AB) asserts |
| * ENUM# twice... |
| */ |
| if (slot->dev) { |
| warn("slot %s already inserted", |
| slot->hotplug_slot->name); |
| inserted++; |
| continue; |
| } |
| |
| /* Process insertion */ |
| dbg("%s - slot %s inserted", |
| __FUNCTION__, slot->hotplug_slot->name); |
| |
| /* GSM, debug */ |
| hs_csr = cpci_get_hs_csr(slot); |
| dbg("%s - slot %s HS_CSR (1) = %04x", |
| __FUNCTION__, slot->hotplug_slot->name, hs_csr); |
| |
| /* Configure device */ |
| dbg("%s - configuring slot %s", |
| __FUNCTION__, slot->hotplug_slot->name); |
| if (cpci_configure_slot(slot)) { |
| err("%s - could not configure slot %s", |
| __FUNCTION__, slot->hotplug_slot->name); |
| continue; |
| } |
| dbg("%s - finished configuring slot %s", |
| __FUNCTION__, slot->hotplug_slot->name); |
| |
| /* GSM, debug */ |
| hs_csr = cpci_get_hs_csr(slot); |
| dbg("%s - slot %s HS_CSR (2) = %04x", |
| __FUNCTION__, slot->hotplug_slot->name, hs_csr); |
| |
| if (update_latch_status(slot->hotplug_slot, 1)) |
| warn("failure to update latch file"); |
| |
| if (update_adapter_status(slot->hotplug_slot, 1)) |
| warn("failure to update adapter file"); |
| |
| cpci_led_off(slot); |
| |
| /* GSM, debug */ |
| hs_csr = cpci_get_hs_csr(slot); |
| dbg("%s - slot %s HS_CSR (3) = %04x", |
| __FUNCTION__, slot->hotplug_slot->name, hs_csr); |
| |
| inserted++; |
| } else if (cpci_check_ext(slot)) { |
| /* Process extraction request */ |
| dbg("%s - slot %s extracted", |
| __FUNCTION__, slot->hotplug_slot->name); |
| |
| /* GSM, debug */ |
| hs_csr = cpci_get_hs_csr(slot); |
| dbg("%s - slot %s HS_CSR = %04x", |
| __FUNCTION__, slot->hotplug_slot->name, hs_csr); |
| |
| if (!slot->extracting) { |
| if (update_latch_status(slot->hotplug_slot, 0)) { |
| warn("failure to update latch file"); |
| } |
| slot->extracting = 1; |
| atomic_inc(&extracting); |
| } |
| extracted++; |
| } else if (slot->extracting) { |
| hs_csr = cpci_get_hs_csr(slot); |
| if (hs_csr == 0xffff) { |
| /* |
| * Hmmm, we're likely hosed at this point, should we |
| * bother trying to tell the driver or not? |
| */ |
| err("card in slot %s was improperly removed", |
| slot->hotplug_slot->name); |
| if (update_adapter_status(slot->hotplug_slot, 0)) |
| warn("failure to update adapter file"); |
| slot->extracting = 0; |
| atomic_dec(&extracting); |
| } |
| } |
| } |
| up_read(&list_rwsem); |
| dbg("inserted=%d, extracted=%d, extracting=%d", |
| inserted, extracted, atomic_read(&extracting)); |
| if (inserted || extracted) |
| return extracted; |
| else if (!atomic_read(&extracting)) { |
| err("cannot find ENUM# source, shutting down"); |
| return -1; |
| } |
| return 0; |
| } |
| |
| /* This is the interrupt mode worker thread body */ |
| static int |
| event_thread(void *data) |
| { |
| int rc; |
| |
| lock_kernel(); |
| daemonize("cpci_hp_eventd"); |
| unlock_kernel(); |
| |
| dbg("%s - event thread started", __FUNCTION__); |
| while (1) { |
| dbg("event thread sleeping"); |
| down_interruptible(&event_semaphore); |
| dbg("event thread woken, thread_finished = %d", |
| thread_finished); |
| if (thread_finished || signal_pending(current)) |
| break; |
| do { |
| rc = check_slots(); |
| if (rc > 0) { |
| /* Give userspace a chance to handle extraction */ |
| msleep(500); |
| } else if (rc < 0) { |
| dbg("%s - error checking slots", __FUNCTION__); |
| thread_finished = 1; |
| break; |
| } |
| } while (atomic_read(&extracting) && !thread_finished); |
| if (thread_finished) |
| break; |
| |
| /* Re-enable ENUM# interrupt */ |
| dbg("%s - re-enabling irq", __FUNCTION__); |
| controller->ops->enable_irq(); |
| } |
| dbg("%s - event thread signals exit", __FUNCTION__); |
| up(&thread_exit); |
| return 0; |
| } |
| |
| /* This is the polling mode worker thread body */ |
| static int |
| poll_thread(void *data) |
| { |
| int rc; |
| |
| lock_kernel(); |
| daemonize("cpci_hp_polld"); |
| unlock_kernel(); |
| |
| while (1) { |
| if (thread_finished || signal_pending(current)) |
| break; |
| if (controller->ops->query_enum()) { |
| do { |
| rc = check_slots(); |
| if (rc > 0) { |
| /* Give userspace a chance to handle extraction */ |
| msleep(500); |
| } else if (rc < 0) { |
| dbg("%s - error checking slots", __FUNCTION__); |
| thread_finished = 1; |
| break; |
| } |
| } while (atomic_read(&extracting) && !thread_finished); |
| } |
| msleep(100); |
| } |
| dbg("poll thread signals exit"); |
| up(&thread_exit); |
| return 0; |
| } |
| |
| static int |
| cpci_start_thread(void) |
| { |
| int pid; |
| |
| /* initialize our semaphores */ |
| init_MUTEX_LOCKED(&event_semaphore); |
| init_MUTEX_LOCKED(&thread_exit); |
| thread_finished = 0; |
| |
| if (controller->irq) |
| pid = kernel_thread(event_thread, NULL, 0); |
| else |
| pid = kernel_thread(poll_thread, NULL, 0); |
| if (pid < 0) { |
| err("Can't start up our thread"); |
| return -1; |
| } |
| dbg("Our thread pid = %d", pid); |
| return 0; |
| } |
| |
| static void |
| cpci_stop_thread(void) |
| { |
| thread_finished = 1; |
| dbg("thread finish command given"); |
| if (controller->irq) |
| up(&event_semaphore); |
| dbg("wait for thread to exit"); |
| down(&thread_exit); |
| } |
| |
| int |
| cpci_hp_register_controller(struct cpci_hp_controller *new_controller) |
| { |
| int status = 0; |
| |
| if (controller) |
| return -1; |
| if (!(new_controller && new_controller->ops)) |
| return -EINVAL; |
| if (new_controller->irq) { |
| if (!(new_controller->ops->enable_irq && |
| new_controller->ops->disable_irq)) |
| status = -EINVAL; |
| if (request_irq(new_controller->irq, |
| cpci_hp_intr, |
| new_controller->irq_flags, |
| MY_NAME, |
| new_controller->dev_id)) { |
| err("Can't get irq %d for the hotplug cPCI controller", |
| new_controller->irq); |
| status = -ENODEV; |
| } |
| dbg("%s - acquired controller irq %d", |
| __FUNCTION__, new_controller->irq); |
| } |
| if (!status) |
| controller = new_controller; |
| return status; |
| } |
| |
| static void |
| cleanup_slots(void) |
| { |
| struct slot *slot; |
| struct slot *tmp; |
| |
| /* |
| * Unregister all of our slots with the pci_hotplug subsystem, |
| * and free up all memory that we had allocated. |
| */ |
| down_write(&list_rwsem); |
| if (!slots) |
| goto cleanup_null; |
| list_for_each_entry_safe(slot, tmp, &slot_list, slot_list) { |
| list_del(&slot->slot_list); |
| pci_hp_deregister(slot->hotplug_slot); |
| } |
| cleanup_null: |
| up_write(&list_rwsem); |
| return; |
| } |
| |
| int |
| cpci_hp_unregister_controller(struct cpci_hp_controller *old_controller) |
| { |
| int status = 0; |
| |
| if (controller) { |
| if (!thread_finished) |
| cpci_stop_thread(); |
| if (controller->irq) |
| free_irq(controller->irq, controller->dev_id); |
| controller = NULL; |
| cleanup_slots(); |
| } else |
| status = -ENODEV; |
| return status; |
| } |
| |
| int |
| cpci_hp_start(void) |
| { |
| static int first = 1; |
| int status; |
| |
| dbg("%s - enter", __FUNCTION__); |
| if (!controller) |
| return -ENODEV; |
| |
| down_read(&list_rwsem); |
| if (list_empty(&slot_list)) { |
| up_read(&list_rwsem); |
| return -ENODEV; |
| } |
| up_read(&list_rwsem); |
| |
| status = init_slots(first); |
| if (first) |
| first = 0; |
| if (status) |
| return status; |
| |
| status = cpci_start_thread(); |
| if (status) |
| return status; |
| dbg("%s - thread started", __FUNCTION__); |
| |
| if (controller->irq) { |
| /* Start enum interrupt processing */ |
| dbg("%s - enabling irq", __FUNCTION__); |
| controller->ops->enable_irq(); |
| } |
| dbg("%s - exit", __FUNCTION__); |
| return 0; |
| } |
| |
| int |
| cpci_hp_stop(void) |
| { |
| if (!controller) |
| return -ENODEV; |
| if (controller->irq) { |
| /* Stop enum interrupt processing */ |
| dbg("%s - disabling irq", __FUNCTION__); |
| controller->ops->disable_irq(); |
| } |
| cpci_stop_thread(); |
| return 0; |
| } |
| |
| int __init |
| cpci_hotplug_init(int debug) |
| { |
| cpci_debug = debug; |
| return 0; |
| } |
| |
| void __exit |
| cpci_hotplug_exit(void) |
| { |
| /* |
| * Clean everything up. |
| */ |
| cpci_hp_stop(); |
| cpci_hp_unregister_controller(controller); |
| } |
| |
| EXPORT_SYMBOL_GPL(cpci_hp_register_controller); |
| EXPORT_SYMBOL_GPL(cpci_hp_unregister_controller); |
| EXPORT_SYMBOL_GPL(cpci_hp_register_bus); |
| EXPORT_SYMBOL_GPL(cpci_hp_unregister_bus); |
| EXPORT_SYMBOL_GPL(cpci_hp_start); |
| EXPORT_SYMBOL_GPL(cpci_hp_stop); |