| /* |
| * TI CDCE949 clock synthesizer driver |
| * |
| * Note: This implementation assumes an input of 27MHz to the CDCE. |
| * This is by no means constrained by CDCE hardware although the datasheet |
| * does use this as an example for all illustrations and more importantly: |
| * that is the crystal input on boards it is currently used on. |
| * |
| * Copyright (C) 2009 Texas Instruments Incorporated. http://www.ti.com/ |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| */ |
| #include <linux/kernel.h> |
| #include <linux/clk.h> |
| #include <linux/platform_device.h> |
| #include <linux/i2c.h> |
| |
| #include <mach/clock.h> |
| |
| #include "clock.h" |
| |
| static struct i2c_client *cdce_i2c_client; |
| static DEFINE_MUTEX(cdce_mutex); |
| |
| /* CDCE register descriptor */ |
| struct cdce_reg { |
| u8 addr; |
| u8 val; |
| }; |
| |
| /* Per-Output (Y1, Y2 etc.) frequency descriptor */ |
| struct cdce_freq { |
| /* Frequency in KHz */ |
| unsigned long frequency; |
| /* |
| * List of registers to program to obtain a particular frequency. |
| * 0x0 in register address and value is the end of list marker. |
| */ |
| struct cdce_reg *reglist; |
| }; |
| |
| #define CDCE_FREQ_TABLE_ENTRY(line, out) \ |
| { \ |
| .reglist = cdce_y ##line## _ ##out, \ |
| .frequency = out, \ |
| } |
| |
| /* List of CDCE outputs */ |
| struct cdce_output { |
| /* List of frequencies on this output */ |
| struct cdce_freq *freq_table; |
| /* Number of possible frequencies */ |
| int size; |
| }; |
| |
| /* |
| * Finding out the values to program into CDCE949 registers for a particular |
| * frequency output is not a simple calculation. Have a look at the datasheet |
| * for the details. There is desktop software available to help users with |
| * the calculations. Here, we just depend on the output of that software |
| * (or hand calculations) instead trying to runtime calculate the register |
| * values and inflicting misery on ourselves. |
| */ |
| static struct cdce_reg cdce_y1_148500[] = { |
| { 0x13, 0x00 }, |
| /* program PLL1_0 multiplier */ |
| { 0x18, 0xaf }, |
| { 0x19, 0x50 }, |
| { 0x1a, 0x02 }, |
| { 0x1b, 0xc9 }, |
| /* program PLL1_11 multiplier */ |
| { 0x1c, 0x00 }, |
| { 0x1d, 0x40 }, |
| { 0x1e, 0x02 }, |
| { 0x1f, 0xc9 }, |
| /* output state selection */ |
| { 0x15, 0x00 }, |
| { 0x14, 0xef }, |
| /* switch MUX to PLL1 output */ |
| { 0x14, 0x6f }, |
| { 0x16, 0x06 }, |
| /* set P2DIV divider, P3DIV and input crystal */ |
| { 0x17, 0x06 }, |
| { 0x01, 0x00 }, |
| { 0x05, 0x48 }, |
| { 0x02, 0x80 }, |
| /* enable and disable PLL */ |
| { 0x02, 0xbc }, |
| { 0x03, 0x01 }, |
| { }, |
| }; |
| |
| static struct cdce_reg cdce_y1_74250[] = { |
| { 0x13, 0x00 }, |
| { 0x18, 0xaf }, |
| { 0x19, 0x50 }, |
| { 0x1a, 0x02 }, |
| { 0x1b, 0xc9 }, |
| { 0x1c, 0x00 }, |
| { 0x1d, 0x40 }, |
| { 0x1e, 0x02 }, |
| { 0x1f, 0xc9 }, |
| /* output state selection */ |
| { 0x15, 0x00 }, |
| { 0x14, 0xef }, |
| /* switch MUX to PLL1 output */ |
| { 0x14, 0x6f }, |
| { 0x16, 0x06 }, |
| /* set P2DIV divider, P3DIV and input crystal */ |
| { 0x17, 0x06 }, |
| { 0x01, 0x00 }, |
| { 0x05, 0x48 }, |
| { 0x02, 0x80 }, |
| /* enable and disable PLL */ |
| { 0x02, 0xbc }, |
| { 0x03, 0x02 }, |
| { }, |
| }; |
| |
| static struct cdce_reg cdce_y1_27000[] = { |
| { 0x13, 0x00 }, |
| { 0x18, 0x00 }, |
| { 0x19, 0x40 }, |
| { 0x1a, 0x02 }, |
| { 0x1b, 0x08 }, |
| { 0x1c, 0x00 }, |
| { 0x1d, 0x40 }, |
| { 0x1e, 0x02 }, |
| { 0x1f, 0x08 }, |
| { 0x15, 0x02 }, |
| { 0x14, 0xed }, |
| { 0x16, 0x01 }, |
| { 0x17, 0x01 }, |
| { 0x01, 0x00 }, |
| { 0x05, 0x50 }, |
| { 0x02, 0xb4 }, |
| { 0x03, 0x01 }, |
| { }, |
| }; |
| |
| static struct cdce_freq cdce_y1_freqs[] = { |
| CDCE_FREQ_TABLE_ENTRY(1, 148500), |
| CDCE_FREQ_TABLE_ENTRY(1, 74250), |
| CDCE_FREQ_TABLE_ENTRY(1, 27000), |
| }; |
| |
| static struct cdce_reg cdce_y5_13500[] = { |
| { 0x27, 0x08 }, |
| { 0x28, 0x00 }, |
| { 0x29, 0x40 }, |
| { 0x2a, 0x02 }, |
| { 0x2b, 0x08 }, |
| { 0x24, 0x6f }, |
| { }, |
| }; |
| |
| static struct cdce_reg cdce_y5_16875[] = { |
| { 0x27, 0x08 }, |
| { 0x28, 0x9f }, |
| { 0x29, 0xb0 }, |
| { 0x2a, 0x02 }, |
| { 0x2b, 0x89 }, |
| { 0x24, 0x6f }, |
| { }, |
| }; |
| |
| static struct cdce_reg cdce_y5_27000[] = { |
| { 0x27, 0x04 }, |
| { 0x28, 0x00 }, |
| { 0x29, 0x40 }, |
| { 0x2a, 0x02 }, |
| { 0x2b, 0x08 }, |
| { 0x24, 0x6f }, |
| { }, |
| }; |
| static struct cdce_reg cdce_y5_54000[] = { |
| { 0x27, 0x04 }, |
| { 0x28, 0xff }, |
| { 0x29, 0x80 }, |
| { 0x2a, 0x02 }, |
| { 0x2b, 0x07 }, |
| { 0x24, 0x6f }, |
| { }, |
| }; |
| |
| static struct cdce_reg cdce_y5_81000[] = { |
| { 0x27, 0x02 }, |
| { 0x28, 0xbf }, |
| { 0x29, 0xa0 }, |
| { 0x2a, 0x03 }, |
| { 0x2b, 0x0a }, |
| { 0x24, 0x6f }, |
| { }, |
| }; |
| |
| static struct cdce_freq cdce_y5_freqs[] = { |
| CDCE_FREQ_TABLE_ENTRY(5, 13500), |
| CDCE_FREQ_TABLE_ENTRY(5, 16875), |
| CDCE_FREQ_TABLE_ENTRY(5, 27000), |
| CDCE_FREQ_TABLE_ENTRY(5, 54000), |
| CDCE_FREQ_TABLE_ENTRY(5, 81000), |
| }; |
| |
| |
| static struct cdce_output output_list[] = { |
| [1] = { cdce_y1_freqs, ARRAY_SIZE(cdce_y1_freqs) }, |
| [5] = { cdce_y5_freqs, ARRAY_SIZE(cdce_y5_freqs) }, |
| }; |
| |
| int cdce_set_rate(struct clk *clk, unsigned long rate) |
| { |
| int i, ret = 0; |
| struct cdce_freq *freq_table = output_list[clk->lpsc].freq_table; |
| struct cdce_reg *regs = NULL; |
| |
| if (!cdce_i2c_client) |
| return -ENODEV; |
| |
| if (!freq_table) |
| return -EINVAL; |
| |
| for (i = 0; i < output_list[clk->lpsc].size; i++) { |
| if (freq_table[i].frequency == rate / 1000) { |
| regs = freq_table[i].reglist; |
| break; |
| } |
| } |
| |
| if (!regs) |
| return -EINVAL; |
| |
| mutex_lock(&cdce_mutex); |
| for (i = 0; regs[i].addr; i++) { |
| ret = i2c_smbus_write_byte_data(cdce_i2c_client, |
| regs[i].addr | 0x80, regs[i].val); |
| if (ret) |
| break; |
| } |
| mutex_unlock(&cdce_mutex); |
| |
| if (!ret) |
| clk->rate = rate; |
| |
| return ret; |
| } |
| |
| static int cdce_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| cdce_i2c_client = client; |
| return 0; |
| } |
| |
| static int __devexit cdce_remove(struct i2c_client *client) |
| { |
| cdce_i2c_client = NULL; |
| return 0; |
| } |
| |
| static const struct i2c_device_id cdce_id[] = { |
| {"cdce949", 0}, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(i2c, cdce_id); |
| |
| static struct i2c_driver cdce_driver = { |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = "cdce949", |
| }, |
| .probe = cdce_probe, |
| .remove = __devexit_p(cdce_remove), |
| .id_table = cdce_id, |
| }; |
| |
| static int __init cdce_init(void) |
| { |
| return i2c_add_driver(&cdce_driver); |
| } |
| subsys_initcall(cdce_init); |
| |
| static void __exit cdce_exit(void) |
| { |
| i2c_del_driver(&cdce_driver); |
| } |
| module_exit(cdce_exit); |
| |
| MODULE_AUTHOR("Texas Instruments"); |
| MODULE_DESCRIPTION("CDCE949 clock synthesizer driver"); |
| MODULE_LICENSE("GPL v2"); |