| /* |
| * Copyright (c) 2012, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/io.h> |
| #include <linux/iopoll.h> |
| #include <linux/ioport.h> |
| #include <linux/elf.h> |
| #include <linux/delay.h> |
| #include <linux/sched.h> |
| #include <linux/clk.h> |
| #include <linux/err.h> |
| #include <linux/of.h> |
| |
| #include "peripheral-loader.h" |
| |
| #define RMB_MBA_COMMAND 0x08 |
| #define RMB_MBA_STATUS 0x0C |
| #define RMB_PMI_META_DATA 0x10 |
| #define RMB_PMI_CODE_START 0x14 |
| #define RMB_PMI_CODE_LENGTH 0x18 |
| |
| #define CMD_META_DATA_READY 0x1 |
| #define CMD_LOAD_READY 0x2 |
| |
| #define STATUS_META_DATA_AUTH_SUCCESS 0x3 |
| #define STATUS_AUTH_COMPLETE 0x4 |
| |
| #define PROXY_TIMEOUT_MS 10000 |
| #define POLL_INTERVAL_US 50 |
| |
| static int modem_auth_timeout_ms = 10000; |
| module_param(modem_auth_timeout_ms, int, S_IRUGO | S_IWUSR); |
| |
| struct mba_data { |
| void __iomem *reg_base; |
| void __iomem *metadata_base; |
| unsigned long metadata_phys; |
| struct pil_device *pil; |
| struct clk *xo; |
| u32 img_length; |
| }; |
| |
| static int pil_mba_make_proxy_votes(struct pil_desc *pil) |
| { |
| int ret; |
| struct mba_data *drv = dev_get_drvdata(pil->dev); |
| |
| ret = clk_prepare_enable(drv->xo); |
| if (ret) { |
| dev_err(pil->dev, "Failed to enable XO\n"); |
| return ret; |
| } |
| return 0; |
| } |
| |
| static void pil_mba_remove_proxy_votes(struct pil_desc *pil) |
| { |
| struct mba_data *drv = dev_get_drvdata(pil->dev); |
| clk_disable_unprepare(drv->xo); |
| } |
| |
| static int pil_mba_init_image(struct pil_desc *pil, |
| const u8 *metadata, size_t size) |
| { |
| struct mba_data *drv = dev_get_drvdata(pil->dev); |
| s32 status; |
| int ret; |
| |
| /* Copy metadata to assigned shared buffer location */ |
| memcpy(drv->metadata_base, metadata, size); |
| |
| /* Initialize length counter to 0 */ |
| writel_relaxed(0, drv->reg_base + RMB_PMI_CODE_LENGTH); |
| drv->img_length = 0; |
| |
| /* Pass address of meta-data to the MBA and perform authentication */ |
| writel_relaxed(drv->metadata_phys, drv->reg_base + RMB_PMI_META_DATA); |
| writel_relaxed(CMD_META_DATA_READY, drv->reg_base + RMB_MBA_COMMAND); |
| ret = readl_poll_timeout(drv->reg_base + RMB_MBA_STATUS, status, |
| status == STATUS_META_DATA_AUTH_SUCCESS || status < 0, |
| POLL_INTERVAL_US, modem_auth_timeout_ms * 1000); |
| if (ret) { |
| dev_err(pil->dev, "MBA authentication timed out\n"); |
| } else if (status < 0) { |
| dev_err(pil->dev, "MBA returned error %d\n", status); |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static int pil_mba_verify_blob(struct pil_desc *pil, u32 phy_addr, |
| size_t size) |
| { |
| struct mba_data *drv = dev_get_drvdata(pil->dev); |
| s32 status; |
| |
| /* Begin image authentication */ |
| if (drv->img_length == 0) { |
| writel_relaxed(phy_addr, drv->reg_base + RMB_PMI_CODE_START); |
| writel_relaxed(CMD_LOAD_READY, drv->reg_base + RMB_MBA_COMMAND); |
| } |
| /* Increment length counter */ |
| drv->img_length += size; |
| writel_relaxed(drv->img_length, drv->reg_base + RMB_PMI_CODE_LENGTH); |
| |
| status = readl_relaxed(drv->reg_base + RMB_MBA_STATUS); |
| if (status < 0) { |
| dev_err(pil->dev, "MBA returned error %d\n", status); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int pil_mba_auth(struct pil_desc *pil) |
| { |
| struct mba_data *drv = dev_get_drvdata(pil->dev); |
| int ret; |
| s32 status; |
| |
| /* Wait for all segments to be authenticated or an error to occur */ |
| ret = readl_poll_timeout(drv->reg_base + RMB_MBA_STATUS, status, |
| status == STATUS_AUTH_COMPLETE || status < 0, |
| 50, modem_auth_timeout_ms * 1000); |
| if (ret) { |
| dev_err(pil->dev, "MBA authentication timed out\n"); |
| } else if (status < 0) { |
| dev_err(pil->dev, "MBA returned error %d\n", status); |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static int pil_mba_shutdown(struct pil_desc *pil) |
| { |
| return 0; |
| } |
| |
| static struct pil_reset_ops pil_mba_ops = { |
| .init_image = pil_mba_init_image, |
| .proxy_vote = pil_mba_make_proxy_votes, |
| .proxy_unvote = pil_mba_remove_proxy_votes, |
| .verify_blob = pil_mba_verify_blob, |
| .auth_and_reset = pil_mba_auth, |
| .shutdown = pil_mba_shutdown, |
| }; |
| |
| static int __devinit pil_mba_driver_probe(struct platform_device *pdev) |
| { |
| struct mba_data *drv; |
| struct resource *res; |
| struct pil_desc *desc; |
| int ret; |
| |
| drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL); |
| if (!drv) |
| return -ENOMEM; |
| platform_set_drvdata(pdev, drv); |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) |
| return -EINVAL; |
| drv->reg_base = devm_ioremap(&pdev->dev, res->start, |
| resource_size(res)); |
| if (!drv->reg_base) |
| return -ENOMEM; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| if (res) { |
| drv->metadata_base = devm_ioremap(&pdev->dev, res->start, |
| resource_size(res)); |
| if (!drv->metadata_base) |
| return -ENOMEM; |
| drv->metadata_phys = res->start; |
| } |
| |
| desc = devm_kzalloc(&pdev->dev, sizeof(*desc), GFP_KERNEL); |
| if (!drv) |
| return -ENOMEM; |
| |
| ret = of_property_read_string(pdev->dev.of_node, "qcom,firmware-name", |
| &desc->name); |
| if (ret) |
| return ret; |
| |
| of_property_read_string(pdev->dev.of_node, "qcom,depends-on", |
| &desc->depends_on); |
| |
| drv->xo = devm_clk_get(&pdev->dev, "xo"); |
| if (IS_ERR(drv->xo)) |
| return PTR_ERR(drv->xo); |
| |
| desc->dev = &pdev->dev; |
| desc->ops = &pil_mba_ops; |
| desc->owner = THIS_MODULE; |
| desc->proxy_timeout = PROXY_TIMEOUT_MS; |
| |
| drv->pil = msm_pil_register(desc); |
| if (IS_ERR(drv->pil)) |
| return PTR_ERR(drv->pil); |
| |
| return 0; |
| } |
| |
| static int __devexit pil_mba_driver_exit(struct platform_device *pdev) |
| { |
| struct mba_data *drv = platform_get_drvdata(pdev); |
| msm_pil_unregister(drv->pil); |
| return 0; |
| } |
| |
| static struct of_device_id mba_match_table[] = { |
| { .compatible = "qcom,pil-mba" }, |
| {} |
| }; |
| |
| struct platform_driver pil_mba_driver = { |
| .probe = pil_mba_driver_probe, |
| .remove = __devexit_p(pil_mba_driver_exit), |
| .driver = { |
| .name = "pil-mba", |
| .of_match_table = mba_match_table, |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init pil_mba_init(void) |
| { |
| return platform_driver_register(&pil_mba_driver); |
| } |
| module_init(pil_mba_init); |
| |
| static void __exit pil_mba_exit(void) |
| { |
| platform_driver_unregister(&pil_mba_driver); |
| } |
| module_exit(pil_mba_exit); |
| |
| MODULE_DESCRIPTION("Support for modem boot using the Modem Boot Authenticator"); |
| MODULE_LICENSE("GPL v2"); |