| /* |
| * PS3 gelic network driver. |
| * |
| * Copyright (C) 2007 Sony Computer Entertainment Inc. |
| * Copyright 2007 Sony Corporation |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 |
| * as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| #undef DEBUG |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| |
| #include <linux/etherdevice.h> |
| #include <linux/ethtool.h> |
| #include <linux/if_vlan.h> |
| |
| #include <linux/in.h> |
| #include <linux/ip.h> |
| #include <linux/tcp.h> |
| #include <linux/wireless.h> |
| #include <linux/ieee80211.h> |
| #include <linux/if_arp.h> |
| #include <linux/ctype.h> |
| #include <linux/string.h> |
| #include <net/iw_handler.h> |
| |
| #include <linux/dma-mapping.h> |
| #include <net/checksum.h> |
| #include <asm/firmware.h> |
| #include <asm/ps3.h> |
| #include <asm/lv1call.h> |
| |
| #include "ps3_gelic_net.h" |
| #include "ps3_gelic_wireless.h" |
| |
| |
| static int gelic_wl_start_scan(struct gelic_wl_info *wl, int always_scan, |
| u8 *essid, size_t essid_len); |
| static int gelic_wl_try_associate(struct net_device *netdev); |
| |
| /* |
| * tables |
| */ |
| |
| /* 802.11b/g channel to freq in MHz */ |
| static const int channel_freq[] = { |
| 2412, 2417, 2422, 2427, 2432, |
| 2437, 2442, 2447, 2452, 2457, |
| 2462, 2467, 2472, 2484 |
| }; |
| #define NUM_CHANNELS ARRAY_SIZE(channel_freq) |
| |
| /* in bps */ |
| static const int bitrate_list[] = { |
| 1000000, |
| 2000000, |
| 5500000, |
| 11000000, |
| 6000000, |
| 9000000, |
| 12000000, |
| 18000000, |
| 24000000, |
| 36000000, |
| 48000000, |
| 54000000 |
| }; |
| #define NUM_BITRATES ARRAY_SIZE(bitrate_list) |
| |
| /* |
| * wpa2 support requires the hypervisor version 2.0 or later |
| */ |
| static inline int wpa2_capable(void) |
| { |
| return (0 <= ps3_compare_firmware_version(2, 0, 0)); |
| } |
| |
| static inline int precise_ie(void) |
| { |
| return (0 <= ps3_compare_firmware_version(2, 2, 0)); |
| } |
| /* |
| * post_eurus_cmd helpers |
| */ |
| struct eurus_cmd_arg_info { |
| int pre_arg; /* command requres arg1, arg2 at POST COMMAND */ |
| int post_arg; /* command requires arg1, arg2 at GET_RESULT */ |
| }; |
| |
| static const struct eurus_cmd_arg_info cmd_info[GELIC_EURUS_CMD_MAX_INDEX] = { |
| [GELIC_EURUS_CMD_SET_COMMON_CFG] = { .pre_arg = 1}, |
| [GELIC_EURUS_CMD_SET_WEP_CFG] = { .pre_arg = 1}, |
| [GELIC_EURUS_CMD_SET_WPA_CFG] = { .pre_arg = 1}, |
| [GELIC_EURUS_CMD_GET_COMMON_CFG] = { .post_arg = 1}, |
| [GELIC_EURUS_CMD_GET_WEP_CFG] = { .post_arg = 1}, |
| [GELIC_EURUS_CMD_GET_WPA_CFG] = { .post_arg = 1}, |
| [GELIC_EURUS_CMD_GET_RSSI_CFG] = { .post_arg = 1}, |
| [GELIC_EURUS_CMD_START_SCAN] = { .pre_arg = 1}, |
| [GELIC_EURUS_CMD_GET_SCAN] = { .post_arg = 1}, |
| }; |
| |
| #ifdef DEBUG |
| static const char *cmdstr(enum gelic_eurus_command ix) |
| { |
| switch (ix) { |
| case GELIC_EURUS_CMD_ASSOC: |
| return "ASSOC"; |
| case GELIC_EURUS_CMD_DISASSOC: |
| return "DISASSOC"; |
| case GELIC_EURUS_CMD_START_SCAN: |
| return "SCAN"; |
| case GELIC_EURUS_CMD_GET_SCAN: |
| return "GET SCAN"; |
| case GELIC_EURUS_CMD_SET_COMMON_CFG: |
| return "SET_COMMON_CFG"; |
| case GELIC_EURUS_CMD_GET_COMMON_CFG: |
| return "GET_COMMON_CFG"; |
| case GELIC_EURUS_CMD_SET_WEP_CFG: |
| return "SET_WEP_CFG"; |
| case GELIC_EURUS_CMD_GET_WEP_CFG: |
| return "GET_WEP_CFG"; |
| case GELIC_EURUS_CMD_SET_WPA_CFG: |
| return "SET_WPA_CFG"; |
| case GELIC_EURUS_CMD_GET_WPA_CFG: |
| return "GET_WPA_CFG"; |
| case GELIC_EURUS_CMD_GET_RSSI_CFG: |
| return "GET_RSSI"; |
| default: |
| break; |
| } |
| return ""; |
| }; |
| #else |
| static inline const char *cmdstr(enum gelic_eurus_command ix) |
| { |
| return ""; |
| } |
| #endif |
| |
| /* synchronously do eurus commands */ |
| static void gelic_eurus_sync_cmd_worker(struct work_struct *work) |
| { |
| struct gelic_eurus_cmd *cmd; |
| struct gelic_card *card; |
| struct gelic_wl_info *wl; |
| |
| u64 arg1, arg2; |
| |
| pr_debug("%s: <-\n", __func__); |
| cmd = container_of(work, struct gelic_eurus_cmd, work); |
| BUG_ON(cmd_info[cmd->cmd].pre_arg && |
| cmd_info[cmd->cmd].post_arg); |
| wl = cmd->wl; |
| card = port_to_card(wl_port(wl)); |
| |
| if (cmd_info[cmd->cmd].pre_arg) { |
| arg1 = (cmd->buffer) ? |
| ps3_mm_phys_to_lpar(__pa(cmd->buffer)) : |
| 0; |
| arg2 = cmd->buf_size; |
| } else { |
| arg1 = 0; |
| arg2 = 0; |
| } |
| init_completion(&wl->cmd_done_intr); |
| pr_debug("%s: cmd='%s' start\n", __func__, cmdstr(cmd->cmd)); |
| cmd->status = lv1_net_control(bus_id(card), dev_id(card), |
| GELIC_LV1_POST_WLAN_CMD, |
| cmd->cmd, arg1, arg2, |
| &cmd->tag, &cmd->size); |
| if (cmd->status) { |
| complete(&cmd->done); |
| pr_info("%s: cmd issue failed\n", __func__); |
| return; |
| } |
| |
| wait_for_completion(&wl->cmd_done_intr); |
| |
| if (cmd_info[cmd->cmd].post_arg) { |
| arg1 = ps3_mm_phys_to_lpar(__pa(cmd->buffer)); |
| arg2 = cmd->buf_size; |
| } else { |
| arg1 = 0; |
| arg2 = 0; |
| } |
| |
| cmd->status = lv1_net_control(bus_id(card), dev_id(card), |
| GELIC_LV1_GET_WLAN_CMD_RESULT, |
| cmd->tag, arg1, arg2, |
| &cmd->cmd_status, &cmd->size); |
| #ifdef DEBUG |
| if (cmd->status || cmd->cmd_status) { |
| pr_debug("%s: cmd done tag=%#lx arg1=%#lx, arg2=%#lx\n", __func__, |
| cmd->tag, arg1, arg2); |
| pr_debug("%s: cmd done status=%#x cmd_status=%#lx size=%#lx\n", |
| __func__, cmd->status, cmd->cmd_status, cmd->size); |
| } |
| #endif |
| complete(&cmd->done); |
| pr_debug("%s: cmd='%s' done\n", __func__, cmdstr(cmd->cmd)); |
| } |
| |
| static struct gelic_eurus_cmd *gelic_eurus_sync_cmd(struct gelic_wl_info *wl, |
| unsigned int eurus_cmd, |
| void *buffer, |
| unsigned int buf_size) |
| { |
| struct gelic_eurus_cmd *cmd; |
| |
| /* allocate cmd */ |
| cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); |
| if (!cmd) |
| return NULL; |
| |
| /* initialize members */ |
| cmd->cmd = eurus_cmd; |
| cmd->buffer = buffer; |
| cmd->buf_size = buf_size; |
| cmd->wl = wl; |
| INIT_WORK(&cmd->work, gelic_eurus_sync_cmd_worker); |
| init_completion(&cmd->done); |
| queue_work(wl->eurus_cmd_queue, &cmd->work); |
| |
| /* wait for command completion */ |
| wait_for_completion(&cmd->done); |
| |
| return cmd; |
| } |
| |
| static u32 gelic_wl_get_link(struct net_device *netdev) |
| { |
| struct gelic_wl_info *wl = port_wl(netdev_port(netdev)); |
| u32 ret; |
| |
| pr_debug("%s: <-\n", __func__); |
| mutex_lock(&wl->assoc_stat_lock); |
| if (wl->assoc_stat == GELIC_WL_ASSOC_STAT_ASSOCIATED) |
| ret = 1; |
| else |
| ret = 0; |
| mutex_unlock(&wl->assoc_stat_lock); |
| pr_debug("%s: ->\n", __func__); |
| return ret; |
| } |
| |
| static void gelic_wl_send_iwap_event(struct gelic_wl_info *wl, u8 *bssid) |
| { |
| union iwreq_data data; |
| |
| memset(&data, 0, sizeof(data)); |
| if (bssid) |
| memcpy(data.ap_addr.sa_data, bssid, ETH_ALEN); |
| data.ap_addr.sa_family = ARPHRD_ETHER; |
| wireless_send_event(port_to_netdev(wl_port(wl)), SIOCGIWAP, |
| &data, NULL); |
| } |
| |
| /* |
| * wireless extension handlers and helpers |
| */ |
| |
| /* SIOGIWNAME */ |
| static int gelic_wl_get_name(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *iwreq, char *extra) |
| { |
| strcpy(iwreq->name, "IEEE 802.11bg"); |
| return 0; |
| } |
| |
| static void gelic_wl_get_ch_info(struct gelic_wl_info *wl) |
| { |
| struct gelic_card *card = port_to_card(wl_port(wl)); |
| u64 ch_info_raw, tmp; |
| int status; |
| |
| if (!test_and_set_bit(GELIC_WL_STAT_CH_INFO, &wl->stat)) { |
| status = lv1_net_control(bus_id(card), dev_id(card), |
| GELIC_LV1_GET_CHANNEL, 0, 0, 0, |
| &ch_info_raw, |
| &tmp); |
| /* some fw versions may return error */ |
| if (status) { |
| if (status != LV1_NO_ENTRY) |
| pr_info("%s: available ch unknown\n", __func__); |
| wl->ch_info = 0x07ff;/* 11 ch */ |
| } else |
| /* 16 bits of MSB has available channels */ |
| wl->ch_info = ch_info_raw >> 48; |
| } |
| return; |
| } |
| |
| /* SIOGIWRANGE */ |
| static int gelic_wl_get_range(struct net_device *netdev, |
| struct iw_request_info *info, |
| union iwreq_data *iwreq, char *extra) |
| { |
| struct iw_point *point = &iwreq->data; |
| struct iw_range *range = (struct iw_range *)extra; |
| struct gelic_wl_info *wl = port_wl(netdev_port(netdev)); |
| unsigned int i, chs; |
| |
| pr_debug("%s: <-\n", __func__); |
| point->length = sizeof(struct iw_range); |
| memset(range, 0, sizeof(struct iw_range)); |
| |
| range->we_version_compiled = WIRELESS_EXT; |
| range->we_version_source = 22; |
| |
| /* available channels and frequencies */ |
| gelic_wl_get_ch_info(wl); |
| |
| for (i = 0, chs = 0; |
| i < NUM_CHANNELS && chs < IW_MAX_FREQUENCIES; i++) |
| if (wl->ch_info & (1 << i)) { |
| range->freq[chs].i = i + 1; |
| range->freq[chs].m = channel_freq[i]; |
| range->freq[chs].e = 6; |
| chs++; |
| } |
| range->num_frequency = chs; |
| range->old_num_frequency = chs; |
| range->num_channels = chs; |
| range->old_num_channels = chs; |
| |
| /* bitrates */ |
| for (i = 0; i < NUM_BITRATES; i++) |
| range->bitrate[i] = bitrate_list[i]; |
| range->num_bitrates = i; |
| |
| /* signal levels */ |
| range->max_qual.qual = 100; /* relative value */ |
| range->max_qual.level = 100; |
| range->avg_qual.qual = 50; |
| range->avg_qual.level = 50; |
| range->sensitivity = 0; |
| |
| /* Event capability */ |
| IW_EVENT_CAPA_SET_KERNEL(range->event_capa); |
| IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWAP); |
| IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWSCAN); |
| |
| /* encryption capability */ |
| range->enc_capa = IW_ENC_CAPA_WPA | |
| IW_ENC_CAPA_CIPHER_TKIP | IW_ENC_CAPA_CIPHER_CCMP | |
| IW_ENC_CAPA_4WAY_HANDSHAKE; |
| if (wpa2_capable()) |
| range->enc_capa |= IW_ENC_CAPA_WPA2; |
| range->encoding_size[0] = 5; /* 40bit WEP */ |
| range->encoding_size[1] = 13; /* 104bit WEP */ |
| range->encoding_size[2] = 32; /* WPA-PSK */ |
| range->num_encoding_sizes = 3; |
| range->max_encoding_tokens = GELIC_WEP_KEYS; |
| |
| /* scan capability */ |
| range->scan_capa = IW_SCAN_CAPA_ESSID; |
| |
| pr_debug("%s: ->\n", __func__); |
| return 0; |
| |
| } |
| |
| /* SIOC{G,S}IWSCAN */ |
| static int gelic_wl_set_scan(struct net_device *netdev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| struct gelic_wl_info *wl = port_wl(netdev_priv(netdev)); |
| struct iw_scan_req *req; |
| u8 *essid = NULL; |
| size_t essid_len = 0; |
| |
| if (wrqu->data.length == sizeof(struct iw_scan_req) && |
| wrqu->data.flags & IW_SCAN_THIS_ESSID) { |
| req = (struct iw_scan_req*)extra; |
| essid = req->essid; |
| essid_len = req->essid_len; |
| pr_debug("%s: ESSID scan =%s\n", __func__, essid); |
| } |
| return gelic_wl_start_scan(wl, 1, essid, essid_len); |
| } |
| |
| #define OUI_LEN 3 |
| static const u8 rsn_oui[OUI_LEN] = { 0x00, 0x0f, 0xac }; |
| static const u8 wpa_oui[OUI_LEN] = { 0x00, 0x50, 0xf2 }; |
| |
| /* |
| * synthesize WPA/RSN IE data |
| * See WiFi WPA specification and IEEE 802.11-2007 7.3.2.25 |
| * for the format |
| */ |
| static size_t gelic_wl_synthesize_ie(u8 *buf, |
| struct gelic_eurus_scan_info *scan) |
| { |
| |
| const u8 *oui_header; |
| u8 *start = buf; |
| int rsn; |
| int ccmp; |
| |
| pr_debug("%s: <- sec=%16x\n", __func__, scan->security); |
| switch (be16_to_cpu(scan->security) & GELIC_EURUS_SCAN_SEC_MASK) { |
| case GELIC_EURUS_SCAN_SEC_WPA: |
| rsn = 0; |
| break; |
| case GELIC_EURUS_SCAN_SEC_WPA2: |
| rsn = 1; |
| break; |
| default: |
| /* WEP or none. No IE returned */ |
| return 0; |
| } |
| |
| switch (be16_to_cpu(scan->security) & GELIC_EURUS_SCAN_SEC_WPA_MASK) { |
| case GELIC_EURUS_SCAN_SEC_WPA_TKIP: |
| ccmp = 0; |
| break; |
| case GELIC_EURUS_SCAN_SEC_WPA_AES: |
| ccmp = 1; |
| break; |
| default: |
| if (rsn) { |
| ccmp = 1; |
| pr_info("%s: no cipher info. defaulted to CCMP\n", |
| __func__); |
| } else { |
| ccmp = 0; |
| pr_info("%s: no cipher info. defaulted to TKIP\n", |
| __func__); |
| } |
| } |
| |
| if (rsn) |
| oui_header = rsn_oui; |
| else |
| oui_header = wpa_oui; |
| |
| /* element id */ |
| if (rsn) |
| *buf++ = WLAN_EID_RSN; |
| else |
| *buf++ = WLAN_EID_GENERIC; |
| |
| /* length filed; set later */ |
| buf++; |
| |
| /* wpa special header */ |
| if (!rsn) { |
| memcpy(buf, wpa_oui, OUI_LEN); |
| buf += OUI_LEN; |
| *buf++ = 0x01; |
| } |
| |
| /* version */ |
| *buf++ = 0x01; /* version 1.0 */ |
| *buf++ = 0x00; |
| |
| /* group cipher */ |
| memcpy(buf, oui_header, OUI_LEN); |
| buf += OUI_LEN; |
| |
| if (ccmp) |
| *buf++ = 0x04; /* CCMP */ |
| else |
| *buf++ = 0x02; /* TKIP */ |
| |
| /* pairwise key count always 1 */ |
| *buf++ = 0x01; |
| *buf++ = 0x00; |
| |
| /* pairwise key suit */ |
| memcpy(buf, oui_header, OUI_LEN); |
| buf += OUI_LEN; |
| if (ccmp) |
| *buf++ = 0x04; /* CCMP */ |
| else |
| *buf++ = 0x02; /* TKIP */ |
| |
| /* AKM count is 1 */ |
| *buf++ = 0x01; |
| *buf++ = 0x00; |
| |
| /* AKM suite is assumed as PSK*/ |
| memcpy(buf, oui_header, OUI_LEN); |
| buf += OUI_LEN; |
| *buf++ = 0x02; /* PSK */ |
| |
| /* RSN capabilities is 0 */ |
| *buf++ = 0x00; |
| *buf++ = 0x00; |
| |
| /* set length field */ |
| start[1] = (buf - start - 2); |
| |
| pr_debug("%s: ->\n", __func__); |
| return (buf - start); |
| } |
| |
| struct ie_item { |
| u8 *data; |
| u8 len; |
| }; |
| |
| struct ie_info { |
| struct ie_item wpa; |
| struct ie_item rsn; |
| }; |
| |
| static void gelic_wl_parse_ie(u8 *data, size_t len, |
| struct ie_info *ie_info) |
| { |
| size_t data_left = len; |
| u8 *pos = data; |
| u8 item_len; |
| u8 item_id; |
| |
| pr_debug("%s: data=%p len=%ld \n", __func__, |
| data, len); |
| memset(ie_info, 0, sizeof(struct ie_info)); |
| |
| while (2 <= data_left) { |
| item_id = *pos++; |
| item_len = *pos++; |
| data_left -= 2; |
| |
| if (data_left < item_len) |
| break; |
| |
| switch (item_id) { |
| case WLAN_EID_GENERIC: |
| if ((OUI_LEN + 1 <= item_len) && |
| !memcmp(pos, wpa_oui, OUI_LEN) && |
| pos[OUI_LEN] == 0x01) { |
| ie_info->wpa.data = pos - 2; |
| ie_info->wpa.len = item_len + 2; |
| } |
| break; |
| case WLAN_EID_RSN: |
| ie_info->rsn.data = pos - 2; |
| /* length includes the header */ |
| ie_info->rsn.len = item_len + 2; |
| break; |
| default: |
| pr_debug("%s: ignore %#x,%d\n", __func__, |
| item_id, item_len); |
| break; |
| } |
| pos += item_len; |
| data_left -= item_len; |
| } |
| pr_debug("%s: wpa=%p,%d wpa2=%p,%d\n", __func__, |
| ie_info->wpa.data, ie_info->wpa.len, |
| ie_info->rsn.data, ie_info->rsn.len); |
| } |
| |
| |
| /* |
| * translate the scan informations from hypervisor to a |
| * independent format |
| */ |
| static char *gelic_wl_translate_scan(struct net_device *netdev, |
| struct iw_request_info *info, |
| char *ev, |
| char *stop, |
| struct gelic_wl_scan_info *network) |
| { |
| struct iw_event iwe; |
| struct gelic_eurus_scan_info *scan = network->hwinfo; |
| char *tmp; |
| u8 rate; |
| unsigned int i, j, len; |
| u8 buf[64]; /* arbitrary size large enough */ |
| |
| pr_debug("%s: <-\n", __func__); |
| |
| /* first entry should be AP's mac address */ |
| iwe.cmd = SIOCGIWAP; |
| iwe.u.ap_addr.sa_family = ARPHRD_ETHER; |
| memcpy(iwe.u.ap_addr.sa_data, &scan->bssid[2], ETH_ALEN); |
| ev = iwe_stream_add_event(info, ev, stop, &iwe, IW_EV_ADDR_LEN); |
| |
| /* ESSID */ |
| iwe.cmd = SIOCGIWESSID; |
| iwe.u.data.flags = 1; |
| iwe.u.data.length = strnlen(scan->essid, 32); |
| ev = iwe_stream_add_point(info, ev, stop, &iwe, scan->essid); |
| |
| /* FREQUENCY */ |
| iwe.cmd = SIOCGIWFREQ; |
| iwe.u.freq.m = be16_to_cpu(scan->channel); |
| iwe.u.freq.e = 0; /* table value in MHz */ |
| iwe.u.freq.i = 0; |
| ev = iwe_stream_add_event(info, ev, stop, &iwe, IW_EV_FREQ_LEN); |
| |
| /* RATES */ |
| iwe.cmd = SIOCGIWRATE; |
| iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0; |
| /* to stuff multiple values in one event */ |
| tmp = ev + iwe_stream_lcp_len(info); |
| /* put them in ascendant order (older is first) */ |
| i = 0; |
| j = 0; |
| pr_debug("%s: rates=%d rate=%d\n", __func__, |
| network->rate_len, network->rate_ext_len); |
| while (i < network->rate_len) { |
| if (j < network->rate_ext_len && |
| ((scan->ext_rate[j] & 0x7f) < (scan->rate[i] & 0x7f))) |
| rate = scan->ext_rate[j++] & 0x7f; |
| else |
| rate = scan->rate[i++] & 0x7f; |
| iwe.u.bitrate.value = rate * 500000; /* 500kbps unit */ |
| tmp = iwe_stream_add_value(info, ev, tmp, stop, &iwe, |
| IW_EV_PARAM_LEN); |
| } |
| while (j < network->rate_ext_len) { |
| iwe.u.bitrate.value = (scan->ext_rate[j++] & 0x7f) * 500000; |
| tmp = iwe_stream_add_value(info, ev, tmp, stop, &iwe, |
| IW_EV_PARAM_LEN); |
| } |
| /* Check if we added any rate */ |
| if (iwe_stream_lcp_len(info) < (tmp - ev)) |
| ev = tmp; |
| |
| /* ENCODE */ |
| iwe.cmd = SIOCGIWENCODE; |
| if (be16_to_cpu(scan->capability) & WLAN_CAPABILITY_PRIVACY) |
| iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; |
| else |
| iwe.u.data.flags = IW_ENCODE_DISABLED; |
| iwe.u.data.length = 0; |
| ev = iwe_stream_add_point(info, ev, stop, &iwe, scan->essid); |
| |
| /* MODE */ |
| iwe.cmd = SIOCGIWMODE; |
| if (be16_to_cpu(scan->capability) & |
| (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)) { |
| if (be16_to_cpu(scan->capability) & WLAN_CAPABILITY_ESS) |
| iwe.u.mode = IW_MODE_MASTER; |
| else |
| iwe.u.mode = IW_MODE_ADHOC; |
| ev = iwe_stream_add_event(info, ev, stop, &iwe, IW_EV_UINT_LEN); |
| } |
| |
| /* QUAL */ |
| iwe.cmd = IWEVQUAL; |
| iwe.u.qual.updated = IW_QUAL_ALL_UPDATED | |
| IW_QUAL_QUAL_INVALID | IW_QUAL_NOISE_INVALID; |
| iwe.u.qual.level = be16_to_cpu(scan->rssi); |
| iwe.u.qual.qual = be16_to_cpu(scan->rssi); |
| iwe.u.qual.noise = 0; |
| ev = iwe_stream_add_event(info, ev, stop, &iwe, IW_EV_QUAL_LEN); |
| |
| /* RSN */ |
| memset(&iwe, 0, sizeof(iwe)); |
| if (be16_to_cpu(scan->size) <= sizeof(*scan)) { |
| /* If wpa[2] capable station, synthesize IE and put it */ |
| len = gelic_wl_synthesize_ie(buf, scan); |
| if (len) { |
| iwe.cmd = IWEVGENIE; |
| iwe.u.data.length = len; |
| ev = iwe_stream_add_point(info, ev, stop, &iwe, buf); |
| } |
| } else { |
| /* this scan info has IE data */ |
| struct ie_info ie_info; |
| size_t data_len; |
| |
| data_len = be16_to_cpu(scan->size) - sizeof(*scan); |
| |
| gelic_wl_parse_ie(scan->elements, data_len, &ie_info); |
| |
| if (ie_info.wpa.len && (ie_info.wpa.len <= sizeof(buf))) { |
| memcpy(buf, ie_info.wpa.data, ie_info.wpa.len); |
| iwe.cmd = IWEVGENIE; |
| iwe.u.data.length = ie_info.wpa.len; |
| ev = iwe_stream_add_point(info, ev, stop, &iwe, buf); |
| } |
| |
| if (ie_info.rsn.len && (ie_info.rsn.len <= sizeof(buf))) { |
| memset(&iwe, 0, sizeof(iwe)); |
| memcpy(buf, ie_info.rsn.data, ie_info.rsn.len); |
| iwe.cmd = IWEVGENIE; |
| iwe.u.data.length = ie_info.rsn.len; |
| ev = iwe_stream_add_point(info, ev, stop, &iwe, buf); |
| } |
| } |
| |
| pr_debug("%s: ->\n", __func__); |
| return ev; |
| } |
| |
| |
| static int gelic_wl_get_scan(struct net_device *netdev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| struct gelic_wl_info *wl = port_wl(netdev_priv(netdev)); |
| struct gelic_wl_scan_info *scan_info; |
| char *ev = extra; |
| char *stop = ev + wrqu->data.length; |
| int ret = 0; |
| unsigned long this_time = jiffies; |
| |
| pr_debug("%s: <-\n", __func__); |
| if (mutex_lock_interruptible(&wl->scan_lock)) |
| return -EAGAIN; |
| |
| switch (wl->scan_stat) { |
| case GELIC_WL_SCAN_STAT_SCANNING: |
| /* If a scan in progress, caller should call me again */ |
| ret = -EAGAIN; |
| goto out; |
| break; |
| |
| case GELIC_WL_SCAN_STAT_INIT: |
| /* last scan request failed or never issued */ |
| ret = -ENODEV; |
| goto out; |
| break; |
| case GELIC_WL_SCAN_STAT_GOT_LIST: |
| /* ok, use current list */ |
| break; |
| } |
| |
| list_for_each_entry(scan_info, &wl->network_list, list) { |
| if (wl->scan_age == 0 || |
| time_after(scan_info->last_scanned + wl->scan_age, |
| this_time)) |
| ev = gelic_wl_translate_scan(netdev, info, |
| ev, stop, |
| scan_info); |
| else |
| pr_debug("%s:entry too old\n", __func__); |
| |
| if (stop - ev <= IW_EV_ADDR_LEN) { |
| ret = -E2BIG; |
| goto out; |
| } |
| } |
| |
| wrqu->data.length = ev - extra; |
| wrqu->data.flags = 0; |
| out: |
| mutex_unlock(&wl->scan_lock); |
| pr_debug("%s: -> %d %d\n", __func__, ret, wrqu->data.length); |
| return ret; |
| } |
| |
| #ifdef DEBUG |
| static void scan_list_dump(struct gelic_wl_info *wl) |
| { |
| struct gelic_wl_scan_info *scan_info; |
| int i; |
| |
| i = 0; |
| list_for_each_entry(scan_info, &wl->network_list, list) { |
| pr_debug("%s: item %d\n", __func__, i++); |
| pr_debug("valid=%d eurusindex=%d last=%lx\n", |
| scan_info->valid, scan_info->eurus_index, |
| scan_info->last_scanned); |
| pr_debug("r_len=%d r_ext_len=%d essid_len=%d\n", |
| scan_info->rate_len, scan_info->rate_ext_len, |
| scan_info->essid_len); |
| /* -- */ |
| pr_debug("bssid=%pM\n", &scan_info->hwinfo->bssid[2]); |
| pr_debug("essid=%s\n", scan_info->hwinfo->essid); |
| } |
| } |
| #endif |
| |
| static int gelic_wl_set_auth(struct net_device *netdev, |
| struct iw_request_info *info, |
| union iwreq_data *data, char *extra) |
| { |
| struct iw_param *param = &data->param; |
| struct gelic_wl_info *wl = port_wl(netdev_port(netdev)); |
| unsigned long irqflag; |
| int ret = 0; |
| |
| pr_debug("%s: <- %d\n", __func__, param->flags & IW_AUTH_INDEX); |
| spin_lock_irqsave(&wl->lock, irqflag); |
| switch (param->flags & IW_AUTH_INDEX) { |
| case IW_AUTH_WPA_VERSION: |
| if (param->value & IW_AUTH_WPA_VERSION_DISABLED) { |
| pr_debug("%s: NO WPA selected\n", __func__); |
| wl->wpa_level = GELIC_WL_WPA_LEVEL_NONE; |
| wl->group_cipher_method = GELIC_WL_CIPHER_WEP; |
| wl->pairwise_cipher_method = GELIC_WL_CIPHER_WEP; |
| } |
| if (param->value & IW_AUTH_WPA_VERSION_WPA) { |
| pr_debug("%s: WPA version 1 selected\n", __func__); |
| wl->wpa_level = GELIC_WL_WPA_LEVEL_WPA; |
| wl->group_cipher_method = GELIC_WL_CIPHER_TKIP; |
| wl->pairwise_cipher_method = GELIC_WL_CIPHER_TKIP; |
| wl->auth_method = GELIC_EURUS_AUTH_OPEN; |
| } |
| if (param->value & IW_AUTH_WPA_VERSION_WPA2) { |
| /* |
| * As the hypervisor may not tell the cipher |
| * information of the AP if it is WPA2, |
| * you will not decide suitable cipher from |
| * its beacon. |
| * You should have knowledge about the AP's |
| * cipher infomation in other method prior to |
| * the association. |
| */ |
| if (!precise_ie()) |
| pr_info("%s: WPA2 may not work\n", __func__); |
| if (wpa2_capable()) { |
| wl->wpa_level = GELIC_WL_WPA_LEVEL_WPA2; |
| wl->group_cipher_method = GELIC_WL_CIPHER_AES; |
| wl->pairwise_cipher_method = |
| GELIC_WL_CIPHER_AES; |
| wl->auth_method = GELIC_EURUS_AUTH_OPEN; |
| } else |
| ret = -EINVAL; |
| } |
| break; |
| |
| case IW_AUTH_CIPHER_PAIRWISE: |
| if (param->value & |
| (IW_AUTH_CIPHER_WEP104 | IW_AUTH_CIPHER_WEP40)) { |
| pr_debug("%s: WEP selected\n", __func__); |
| wl->pairwise_cipher_method = GELIC_WL_CIPHER_WEP; |
| } |
| if (param->value & IW_AUTH_CIPHER_TKIP) { |
| pr_debug("%s: TKIP selected\n", __func__); |
| wl->pairwise_cipher_method = GELIC_WL_CIPHER_TKIP; |
| } |
| if (param->value & IW_AUTH_CIPHER_CCMP) { |
| pr_debug("%s: CCMP selected\n", __func__); |
| wl->pairwise_cipher_method = GELIC_WL_CIPHER_AES; |
| } |
| if (param->value & IW_AUTH_CIPHER_NONE) { |
| pr_debug("%s: no auth selected\n", __func__); |
| wl->pairwise_cipher_method = GELIC_WL_CIPHER_NONE; |
| } |
| break; |
| case IW_AUTH_CIPHER_GROUP: |
| if (param->value & |
| (IW_AUTH_CIPHER_WEP104 | IW_AUTH_CIPHER_WEP40)) { |
| pr_debug("%s: WEP selected\n", __func__); |
| wl->group_cipher_method = GELIC_WL_CIPHER_WEP; |
| } |
| if (param->value & IW_AUTH_CIPHER_TKIP) { |
| pr_debug("%s: TKIP selected\n", __func__); |
| wl->group_cipher_method = GELIC_WL_CIPHER_TKIP; |
| } |
| if (param->value & IW_AUTH_CIPHER_CCMP) { |
| pr_debug("%s: CCMP selected\n", __func__); |
| wl->group_cipher_method = GELIC_WL_CIPHER_AES; |
| } |
| if (param->value & IW_AUTH_CIPHER_NONE) { |
| pr_debug("%s: no auth selected\n", __func__); |
| wl->group_cipher_method = GELIC_WL_CIPHER_NONE; |
| } |
| break; |
| case IW_AUTH_80211_AUTH_ALG: |
| if (param->value & IW_AUTH_ALG_SHARED_KEY) { |
| pr_debug("%s: shared key specified\n", __func__); |
| wl->auth_method = GELIC_EURUS_AUTH_SHARED; |
| } else if (param->value & IW_AUTH_ALG_OPEN_SYSTEM) { |
| pr_debug("%s: open system specified\n", __func__); |
| wl->auth_method = GELIC_EURUS_AUTH_OPEN; |
| } else |
| ret = -EINVAL; |
| break; |
| |
| case IW_AUTH_WPA_ENABLED: |
| if (param->value) { |
| pr_debug("%s: WPA enabled\n", __func__); |
| wl->wpa_level = GELIC_WL_WPA_LEVEL_WPA; |
| } else { |
| pr_debug("%s: WPA disabled\n", __func__); |
| wl->wpa_level = GELIC_WL_WPA_LEVEL_NONE; |
| } |
| break; |
| |
| case IW_AUTH_KEY_MGMT: |
| if (param->value & IW_AUTH_KEY_MGMT_PSK) |
| break; |
| /* intentionally fall through */ |
| default: |
| ret = -EOPNOTSUPP; |
| break; |
| }; |
| |
| if (!ret) |
| set_bit(GELIC_WL_STAT_CONFIGURED, &wl->stat); |
| |
| spin_unlock_irqrestore(&wl->lock, irqflag); |
| pr_debug("%s: -> %d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int gelic_wl_get_auth(struct net_device *netdev, |
| struct iw_request_info *info, |
| union iwreq_data *iwreq, char *extra) |
| { |
| struct iw_param *param = &iwreq->param; |
| struct gelic_wl_info *wl = port_wl(netdev_port(netdev)); |
| unsigned long irqflag; |
| int ret = 0; |
| |
| pr_debug("%s: <- %d\n", __func__, param->flags & IW_AUTH_INDEX); |
| spin_lock_irqsave(&wl->lock, irqflag); |
| switch (param->flags & IW_AUTH_INDEX) { |
| case IW_AUTH_WPA_VERSION: |
| switch (wl->wpa_level) { |
| case GELIC_WL_WPA_LEVEL_WPA: |
| param->value |= IW_AUTH_WPA_VERSION_WPA; |
| break; |
| case GELIC_WL_WPA_LEVEL_WPA2: |
| param->value |= IW_AUTH_WPA_VERSION_WPA2; |
| break; |
| default: |
| param->value |= IW_AUTH_WPA_VERSION_DISABLED; |
| } |
| break; |
| |
| case IW_AUTH_80211_AUTH_ALG: |
| if (wl->auth_method == GELIC_EURUS_AUTH_SHARED) |
| param->value = IW_AUTH_ALG_SHARED_KEY; |
| else if (wl->auth_method == GELIC_EURUS_AUTH_OPEN) |
| param->value = IW_AUTH_ALG_OPEN_SYSTEM; |
| break; |
| |
| case IW_AUTH_WPA_ENABLED: |
| switch (wl->wpa_level) { |
| case GELIC_WL_WPA_LEVEL_WPA: |
| case GELIC_WL_WPA_LEVEL_WPA2: |
| param->value = 1; |
| break; |
| default: |
| param->value = 0; |
| break; |
| } |
| break; |
| default: |
| ret = -EOPNOTSUPP; |
| } |
| |
| spin_unlock_irqrestore(&wl->lock, irqflag); |
| pr_debug("%s: -> %d\n", __func__, ret); |
| return ret; |
| } |
| |
| /* SIOC{S,G}IWESSID */ |
| static int gelic_wl_set_essid(struct net_device *netdev, |
| struct iw_request_info *info, |
| union iwreq_data *data, char *extra) |
| { |
| struct gelic_wl_info *wl = port_wl(netdev_priv(netdev)); |
| unsigned long irqflag; |
| |
| pr_debug("%s: <- l=%d f=%d\n", __func__, |
| data->essid.length, data->essid.flags); |
| if (IW_ESSID_MAX_SIZE < data->essid.length) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&wl->lock, irqflag); |
| if (data->essid.flags) { |
| wl->essid_len = data->essid.length; |
| memcpy(wl->essid, extra, wl->essid_len); |
| pr_debug("%s: essid = '%s'\n", __func__, extra); |
| set_bit(GELIC_WL_STAT_ESSID_SET, &wl->stat); |
| } else { |
| pr_debug("%s: ESSID any \n", __func__); |
| clear_bit(GELIC_WL_STAT_ESSID_SET, &wl->stat); |
| } |
| set_bit(GELIC_WL_STAT_CONFIGURED, &wl->stat); |
| spin_unlock_irqrestore(&wl->lock, irqflag); |
| |
| |
| gelic_wl_try_associate(netdev); /* FIXME */ |
| pr_debug("%s: -> \n", __func__); |
| return 0; |
| } |
| |
| static int gelic_wl_get_essid(struct net_device *netdev, |
| struct iw_request_info *info, |
| union iwreq_data *data, char *extra) |
| { |
| struct gelic_wl_info *wl = port_wl(netdev_priv(netdev)); |
| unsigned long irqflag; |
| |
| pr_debug("%s: <- \n", __func__); |
| mutex_lock(&wl->assoc_stat_lock); |
| spin_lock_irqsave(&wl->lock, irqflag); |
| if (test_bit(GELIC_WL_STAT_ESSID_SET, &wl->stat) || |
| wl->assoc_stat == GELIC_WL_ASSOC_STAT_ASSOCIATED) { |
| memcpy(extra, wl->essid, wl->essid_len); |
| data->essid.length = wl->essid_len; |
| data->essid.flags = 1; |
| } else |
| data->essid.flags = 0; |
| |
| mutex_unlock(&wl->assoc_stat_lock); |
| spin_unlock_irqrestore(&wl->lock, irqflag); |
| pr_debug("%s: -> len=%d \n", __func__, data->essid.length); |
| |
| return 0; |
| } |
| |
| /* SIO{S,G}IWENCODE */ |
| static int gelic_wl_set_encode(struct net_device *netdev, |
| struct iw_request_info *info, |
| union iwreq_data *data, char *extra) |
| { |
| struct gelic_wl_info *wl = port_wl(netdev_priv(netdev)); |
| struct iw_point *enc = &data->encoding; |
| __u16 flags; |
| unsigned long irqflag; |
| int key_index, index_specified; |
| int ret = 0; |
| |
| pr_debug("%s: <- \n", __func__); |
| flags = enc->flags & IW_ENCODE_FLAGS; |
| key_index = enc->flags & IW_ENCODE_INDEX; |
| |
| pr_debug("%s: key_index = %d\n", __func__, key_index); |
| pr_debug("%s: key_len = %d\n", __func__, enc->length); |
| pr_debug("%s: flag=%x\n", __func__, enc->flags & IW_ENCODE_FLAGS); |
| |
| if (GELIC_WEP_KEYS < key_index) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&wl->lock, irqflag); |
| if (key_index) { |
| index_specified = 1; |
| key_index--; |
| } else { |
| index_specified = 0; |
| key_index = wl->current_key; |
| } |
| |
| if (flags & IW_ENCODE_NOKEY) { |
| /* if just IW_ENCODE_NOKEY, change current key index */ |
| if (!flags && index_specified) { |
| wl->current_key = key_index; |
| goto done; |
| } |
| |
| if (flags & IW_ENCODE_DISABLED) { |
| if (!index_specified) { |
| /* disable encryption */ |
| wl->group_cipher_method = GELIC_WL_CIPHER_NONE; |
| wl->pairwise_cipher_method = |
| GELIC_WL_CIPHER_NONE; |
| /* invalidate all key */ |
| wl->key_enabled = 0; |
| } else |
| clear_bit(key_index, &wl->key_enabled); |
| } |
| |
| if (flags & IW_ENCODE_OPEN) |
| wl->auth_method = GELIC_EURUS_AUTH_OPEN; |
| if (flags & IW_ENCODE_RESTRICTED) { |
| pr_info("%s: shared key mode enabled\n", __func__); |
| wl->auth_method = GELIC_EURUS_AUTH_SHARED; |
| } |
| } else { |
| if (IW_ENCODING_TOKEN_MAX < enc->length) { |
| ret = -EINVAL; |
| goto done; |
| } |
| wl->key_len[key_index] = enc->length; |
| memcpy(wl->key[key_index], extra, enc->length); |
| set_bit(key_index, &wl->key_enabled); |
| wl->pairwise_cipher_method = GELIC_WL_CIPHER_WEP; |
| wl->group_cipher_method = GELIC_WL_CIPHER_WEP; |
| } |
| set_bit(GELIC_WL_STAT_CONFIGURED, &wl->stat); |
| done: |
| spin_unlock_irqrestore(&wl->lock, irqflag); |
| pr_debug("%s: -> \n", __func__); |
| return ret; |
| } |
| |
| static int gelic_wl_get_encode(struct net_device *netdev, |
| struct iw_request_info *info, |
| union iwreq_data *data, char *extra) |
| { |
| struct gelic_wl_info *wl = port_wl(netdev_priv(netdev)); |
| struct iw_point *enc = &data->encoding; |
| unsigned long irqflag; |
| unsigned int key_index, index_specified; |
| int ret = 0; |
| |
| pr_debug("%s: <- \n", __func__); |
| key_index = enc->flags & IW_ENCODE_INDEX; |
| pr_debug("%s: flag=%#x point=%p len=%d extra=%p\n", __func__, |
| enc->flags, enc->pointer, enc->length, extra); |
| if (GELIC_WEP_KEYS < key_index) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&wl->lock, irqflag); |
| if (key_index) { |
| index_specified = 1; |
| key_index--; |
| } else { |
| index_specified = 0; |
| key_index = wl->current_key; |
| } |
| |
| if (wl->group_cipher_method == GELIC_WL_CIPHER_WEP) { |
| switch (wl->auth_method) { |
| case GELIC_EURUS_AUTH_OPEN: |
| enc->flags = IW_ENCODE_OPEN; |
| break; |
| case GELIC_EURUS_AUTH_SHARED: |
| enc->flags = IW_ENCODE_RESTRICTED; |
| break; |
| } |
| } else |
| enc->flags = IW_ENCODE_DISABLED; |
| |
| if (test_bit(key_index, &wl->key_enabled)) { |
| if (enc->length < wl->key_len[key_index]) { |
| ret = -EINVAL; |
| goto done; |
| } |
| enc->length = wl->key_len[key_index]; |
| memcpy(extra, wl->key[key_index], wl->key_len[key_index]); |
| } else { |
| enc->length = 0; |
| enc->flags |= IW_ENCODE_NOKEY; |
| } |
| enc->flags |= key_index + 1; |
| pr_debug("%s: -> flag=%x len=%d\n", __func__, |
| enc->flags, enc->length); |
| |
| done: |
| spin_unlock_irqrestore(&wl->lock, irqflag); |
| return ret; |
| } |
| |
| /* SIOC{S,G}IWAP */ |
| static int gelic_wl_set_ap(struct net_device *netdev, |
| struct iw_request_info *info, |
| union iwreq_data *data, char *extra) |
| { |
| struct gelic_wl_info *wl = port_wl(netdev_priv(netdev)); |
| unsigned long irqflag; |
| |
| pr_debug("%s: <-\n", __func__); |
| if (data->ap_addr.sa_family != ARPHRD_ETHER) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&wl->lock, irqflag); |
| if (is_valid_ether_addr(data->ap_addr.sa_data)) { |
| memcpy(wl->bssid, data->ap_addr.sa_data, |
| ETH_ALEN); |
| set_bit(GELIC_WL_STAT_BSSID_SET, &wl->stat); |
| set_bit(GELIC_WL_STAT_CONFIGURED, &wl->stat); |
| pr_debug("%s: bss=%pM\n", __func__, wl->bssid); |
| } else { |
| pr_debug("%s: clear bssid\n", __func__); |
| clear_bit(GELIC_WL_STAT_BSSID_SET, &wl->stat); |
| memset(wl->bssid, 0, ETH_ALEN); |
| } |
| spin_unlock_irqrestore(&wl->lock, irqflag); |
| pr_debug("%s: ->\n", __func__); |
| return 0; |
| } |
| |
| static int gelic_wl_get_ap(struct net_device *netdev, |
| struct iw_request_info *info, |
| union iwreq_data *data, char *extra) |
| { |
| struct gelic_wl_info *wl = port_wl(netdev_priv(netdev)); |
| unsigned long irqflag; |
| |
| pr_debug("%s: <-\n", __func__); |
| mutex_lock(&wl->assoc_stat_lock); |
| spin_lock_irqsave(&wl->lock, irqflag); |
| if (wl->assoc_stat == GELIC_WL_ASSOC_STAT_ASSOCIATED) { |
| data->ap_addr.sa_family = ARPHRD_ETHER; |
| memcpy(data->ap_addr.sa_data, wl->active_bssid, |
| ETH_ALEN); |
| } else |
| memset(data->ap_addr.sa_data, 0, ETH_ALEN); |
| |
| spin_unlock_irqrestore(&wl->lock, irqflag); |
| mutex_unlock(&wl->assoc_stat_lock); |
| pr_debug("%s: ->\n", __func__); |
| return 0; |
| } |
| |
| /* SIOC{S,G}IWENCODEEXT */ |
| static int gelic_wl_set_encodeext(struct net_device *netdev, |
| struct iw_request_info *info, |
| union iwreq_data *data, char *extra) |
| { |
| struct gelic_wl_info *wl = port_wl(netdev_priv(netdev)); |
| struct iw_point *enc = &data->encoding; |
| struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; |
| __u16 alg; |
| __u16 flags; |
| unsigned long irqflag; |
| int key_index; |
| int ret = 0; |
| |
| pr_debug("%s: <- \n", __func__); |
| flags = enc->flags & IW_ENCODE_FLAGS; |
| alg = ext->alg; |
| key_index = enc->flags & IW_ENCODE_INDEX; |
| |
| pr_debug("%s: key_index = %d\n", __func__, key_index); |
| pr_debug("%s: key_len = %d\n", __func__, enc->length); |
| pr_debug("%s: flag=%x\n", __func__, enc->flags & IW_ENCODE_FLAGS); |
| pr_debug("%s: ext_flag=%x\n", __func__, ext->ext_flags); |
| pr_debug("%s: ext_key_len=%x\n", __func__, ext->key_len); |
| |
| if (GELIC_WEP_KEYS < key_index) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&wl->lock, irqflag); |
| if (key_index) |
| key_index--; |
| else |
| key_index = wl->current_key; |
| |
| if (!enc->length && (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY)) { |
| /* reques to change default key index */ |
| pr_debug("%s: request to change default key to %d\n", |
| __func__, key_index); |
| wl->current_key = key_index; |
| goto done; |
| } |
| |
| if (alg == IW_ENCODE_ALG_NONE || (flags & IW_ENCODE_DISABLED)) { |
| pr_debug("%s: alg disabled\n", __func__); |
| wl->wpa_level = GELIC_WL_WPA_LEVEL_NONE; |
| wl->group_cipher_method = GELIC_WL_CIPHER_NONE; |
| wl->pairwise_cipher_method = GELIC_WL_CIPHER_NONE; |
| wl->auth_method = GELIC_EURUS_AUTH_OPEN; /* should be open */ |
| } else if (alg == IW_ENCODE_ALG_WEP) { |
| pr_debug("%s: WEP requested\n", __func__); |
| if (flags & IW_ENCODE_OPEN) { |
| pr_debug("%s: open key mode\n", __func__); |
| wl->auth_method = GELIC_EURUS_AUTH_OPEN; |
| } |
| if (flags & IW_ENCODE_RESTRICTED) { |
| pr_debug("%s: shared key mode\n", __func__); |
| wl->auth_method = GELIC_EURUS_AUTH_SHARED; |
| } |
| if (IW_ENCODING_TOKEN_MAX < ext->key_len) { |
| pr_info("%s: key is too long %d\n", __func__, |
| ext->key_len); |
| ret = -EINVAL; |
| goto done; |
| } |
| /* OK, update the key */ |
| wl->key_len[key_index] = ext->key_len; |
| memset(wl->key[key_index], 0, IW_ENCODING_TOKEN_MAX); |
| memcpy(wl->key[key_index], ext->key, ext->key_len); |
| set_bit(key_index, &wl->key_enabled); |
| /* remember wep info changed */ |
| set_bit(GELIC_WL_STAT_CONFIGURED, &wl->stat); |
| } else if (alg == IW_ENCODE_ALG_PMK) { |
| if (ext->key_len != WPA_PSK_LEN) { |
| pr_err("%s: PSK length wrong %d\n", __func__, |
| ext->key_len); |
| ret = -EINVAL; |
| goto done; |
| } |
| memset(wl->psk, 0, sizeof(wl->psk)); |
| memcpy(wl->psk, ext->key, ext->key_len); |
| wl->psk_len = ext->key_len; |
| wl->psk_type = GELIC_EURUS_WPA_PSK_BIN; |
| /* remember PSK configured */ |
| set_bit(GELIC_WL_STAT_WPA_PSK_SET, &wl->stat); |
| } |
| done: |
| spin_unlock_irqrestore(&wl->lock, irqflag); |
| pr_debug("%s: -> \n", __func__); |
| return ret; |
| } |
| |
| static int gelic_wl_get_encodeext(struct net_device *netdev, |
| struct iw_request_info *info, |
| union iwreq_data *data, char *extra) |
| { |
| struct gelic_wl_info *wl = port_wl(netdev_priv(netdev)); |
| struct iw_point *enc = &data->encoding; |
| struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; |
| unsigned long irqflag; |
| int key_index; |
| int ret = 0; |
| int max_key_len; |
| |
| pr_debug("%s: <- \n", __func__); |
| |
| max_key_len = enc->length - sizeof(struct iw_encode_ext); |
| if (max_key_len < 0) |
| return -EINVAL; |
| key_index = enc->flags & IW_ENCODE_INDEX; |
| |
| pr_debug("%s: key_index = %d\n", __func__, key_index); |
| pr_debug("%s: key_len = %d\n", __func__, enc->length); |
| pr_debug("%s: flag=%x\n", __func__, enc->flags & IW_ENCODE_FLAGS); |
| |
| if (GELIC_WEP_KEYS < key_index) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&wl->lock, irqflag); |
| if (key_index) |
| key_index--; |
| else |
| key_index = wl->current_key; |
| |
| memset(ext, 0, sizeof(struct iw_encode_ext)); |
| switch (wl->group_cipher_method) { |
| case GELIC_WL_CIPHER_WEP: |
| ext->alg = IW_ENCODE_ALG_WEP; |
| enc->flags |= IW_ENCODE_ENABLED; |
| break; |
| case GELIC_WL_CIPHER_TKIP: |
| ext->alg = IW_ENCODE_ALG_TKIP; |
| enc->flags |= IW_ENCODE_ENABLED; |
| break; |
| case GELIC_WL_CIPHER_AES: |
| ext->alg = IW_ENCODE_ALG_CCMP; |
| enc->flags |= IW_ENCODE_ENABLED; |
| break; |
| case GELIC_WL_CIPHER_NONE: |
| default: |
| ext->alg = IW_ENCODE_ALG_NONE; |
| enc->flags |= IW_ENCODE_NOKEY; |
| break; |
| } |
| |
| if (!(enc->flags & IW_ENCODE_NOKEY)) { |
| if (max_key_len < wl->key_len[key_index]) { |
| ret = -E2BIG; |
| goto out; |
| } |
| if (test_bit(key_index, &wl->key_enabled)) |
| memcpy(ext->key, wl->key[key_index], |
| wl->key_len[key_index]); |
| else |
| pr_debug("%s: disabled key requested ix=%d\n", |
| __func__, key_index); |
| } |
| out: |
| spin_unlock_irqrestore(&wl->lock, irqflag); |
| pr_debug("%s: -> \n", __func__); |
| return ret; |
| } |
| /* SIOC{S,G}IWMODE */ |
| static int gelic_wl_set_mode(struct net_device *netdev, |
| struct iw_request_info *info, |
| union iwreq_data *data, char *extra) |
| { |
| __u32 mode = data->mode; |
| int ret; |
| |
| pr_debug("%s: <- \n", __func__); |
| if (mode == IW_MODE_INFRA) |
| ret = 0; |
| else |
| ret = -EOPNOTSUPP; |
| pr_debug("%s: -> %d\n", __func__, ret); |
| return ret; |
| } |
| |
| static int gelic_wl_get_mode(struct net_device *netdev, |
| struct iw_request_info *info, |
| union iwreq_data *data, char *extra) |
| { |
| __u32 *mode = &data->mode; |
| pr_debug("%s: <- \n", __func__); |
| *mode = IW_MODE_INFRA; |
| pr_debug("%s: ->\n", __func__); |
| return 0; |
| } |
| |
| /* SIOCGIWNICKN */ |
| static int gelic_wl_get_nick(struct net_device *net_dev, |
| struct iw_request_info *info, |
| union iwreq_data *data, char *extra) |
| { |
| strcpy(extra, "gelic_wl"); |
| data->data.length = strlen(extra); |
| data->data.flags = 1; |
| return 0; |
| } |
| |
| |
| /* --- */ |
| |
| static struct iw_statistics *gelic_wl_get_wireless_stats( |
| struct net_device *netdev) |
| { |
| |
| struct gelic_wl_info *wl = port_wl(netdev_priv(netdev)); |
| struct gelic_eurus_cmd *cmd; |
| struct iw_statistics *is; |
| struct gelic_eurus_rssi_info *rssi; |
| void *buf; |
| |
| pr_debug("%s: <-\n", __func__); |
| |
| buf = (void *)__get_free_page(GFP_KERNEL); |
| if (!buf) |
| return NULL; |
| |
| is = &wl->iwstat; |
| memset(is, 0, sizeof(*is)); |
| cmd = gelic_eurus_sync_cmd(wl, GELIC_EURUS_CMD_GET_RSSI_CFG, |
| buf, sizeof(*rssi)); |
| if (cmd && !cmd->status && !cmd->cmd_status) { |
| rssi = buf; |
| is->qual.level = be16_to_cpu(rssi->rssi); |
| is->qual.updated = IW_QUAL_LEVEL_UPDATED | |
| IW_QUAL_QUAL_INVALID | IW_QUAL_NOISE_INVALID; |
| } else |
| /* not associated */ |
| is->qual.updated = IW_QUAL_ALL_INVALID; |
| |
| kfree(cmd); |
| free_page((unsigned long)buf); |
| pr_debug("%s: ->\n", __func__); |
| return is; |
| } |
| |
| /* |
| * scanning helpers |
| */ |
| static int gelic_wl_start_scan(struct gelic_wl_info *wl, int always_scan, |
| u8 *essid, size_t essid_len) |
| { |
| struct gelic_eurus_cmd *cmd; |
| int ret = 0; |
| void *buf = NULL; |
| size_t len; |
| |
| pr_debug("%s: <- always=%d\n", __func__, always_scan); |
| if (mutex_lock_interruptible(&wl->scan_lock)) |
| return -ERESTARTSYS; |
| |
| /* |
| * If already a scan in progress, do not trigger more |
| */ |
| if (wl->scan_stat == GELIC_WL_SCAN_STAT_SCANNING) { |
| pr_debug("%s: scanning now\n", __func__); |
| goto out; |
| } |
| |
| init_completion(&wl->scan_done); |
| /* |
| * If we have already a bss list, don't try to get new |
| * unless we are doing an ESSID scan |
| */ |
| if ((!essid_len && !always_scan) |
| && wl->scan_stat == GELIC_WL_SCAN_STAT_GOT_LIST) { |
| pr_debug("%s: already has the list\n", __func__); |
| complete(&wl->scan_done); |
| goto out; |
| } |
| |
| /* ESSID scan ? */ |
| if (essid_len && essid) { |
| buf = (void *)__get_free_page(GFP_KERNEL); |
| if (!buf) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| len = IW_ESSID_MAX_SIZE; /* hypervisor always requires 32 */ |
| memset(buf, 0, len); |
| memcpy(buf, essid, essid_len); |
| pr_debug("%s: essid scan='%s'\n", __func__, (char *)buf); |
| } else |
| len = 0; |
| |
| /* |
| * issue start scan request |
| */ |
| wl->scan_stat = GELIC_WL_SCAN_STAT_SCANNING; |
| cmd = gelic_eurus_sync_cmd(wl, GELIC_EURUS_CMD_START_SCAN, |
| buf, len); |
| if (!cmd || cmd->status || cmd->cmd_status) { |
| wl->scan_stat = GELIC_WL_SCAN_STAT_INIT; |
| complete(&wl->scan_done); |
| ret = -ENOMEM; |
| goto out; |
| } |
| kfree(cmd); |
| out: |
| free_page((unsigned long)buf); |
| mutex_unlock(&wl->scan_lock); |
| pr_debug("%s: ->\n", __func__); |
| return ret; |
| } |
| |
| /* |
| * retrieve scan result from the chip (hypervisor) |
| * this function is invoked by schedule work. |
| */ |
| static void gelic_wl_scan_complete_event(struct gelic_wl_info *wl) |
| { |
| struct gelic_eurus_cmd *cmd = NULL; |
| struct gelic_wl_scan_info *target, *tmp; |
| struct gelic_wl_scan_info *oldest = NULL; |
| struct gelic_eurus_scan_info *scan_info; |
| unsigned int scan_info_size; |
| union iwreq_data data; |
| unsigned long this_time = jiffies; |
| unsigned int data_len, i, found, r; |
| void *buf; |
| |
| pr_debug("%s:start\n", __func__); |
| mutex_lock(&wl->scan_lock); |
| |
| buf = (void *)__get_free_page(GFP_KERNEL); |
| if (!buf) { |
| pr_info("%s: scan buffer alloc failed\n", __func__); |
| goto out; |
| } |
| |
| if (wl->scan_stat != GELIC_WL_SCAN_STAT_SCANNING) { |
| /* |
| * stop() may be called while scanning, ignore result |
| */ |
| pr_debug("%s: scan complete when stat != scanning(%d)\n", |
| __func__, wl->scan_stat); |
| goto out; |
| } |
| |
| cmd = gelic_eurus_sync_cmd(wl, GELIC_EURUS_CMD_GET_SCAN, |
| buf, PAGE_SIZE); |
| if (!cmd || cmd->status || cmd->cmd_status) { |
| wl->scan_stat = GELIC_WL_SCAN_STAT_INIT; |
| pr_info("%s:cmd failed\n", __func__); |
| kfree(cmd); |
| goto out; |
| } |
| data_len = cmd->size; |
| pr_debug("%s: data_len = %d\n", __func__, data_len); |
| kfree(cmd); |
| |
| /* OK, bss list retrieved */ |
| wl->scan_stat = GELIC_WL_SCAN_STAT_GOT_LIST; |
| |
| /* mark all entries are old */ |
| list_for_each_entry_safe(target, tmp, &wl->network_list, list) { |
| target->valid = 0; |
| /* expire too old entries */ |
| if (time_before(target->last_scanned + wl->scan_age, |
| this_time)) { |
| kfree(target->hwinfo); |
| target->hwinfo = NULL; |
| list_move_tail(&target->list, &wl->network_free_list); |
| } |
| } |
| |
| /* put them in the network_list */ |
| for (i = 0, scan_info_size = 0, scan_info = buf; |
| scan_info_size < data_len; |
| i++, scan_info_size += be16_to_cpu(scan_info->size), |
| scan_info = (void *)scan_info + be16_to_cpu(scan_info->size)) { |
| pr_debug("%s:size=%d bssid=%pM scan_info=%p\n", __func__, |
| be16_to_cpu(scan_info->size), |
| &scan_info->bssid[2], scan_info); |
| |
| /* |
| * The wireless firmware may return invalid channel 0 and/or |
| * invalid rate if the AP emits zero length SSID ie. As this |
| * scan information is useless, ignore it |
| */ |
| if (!be16_to_cpu(scan_info->channel) || !scan_info->rate[0]) { |
| pr_debug("%s: invalid scan info\n", __func__); |
| continue; |
| } |
| |
| found = 0; |
| oldest = NULL; |
| list_for_each_entry(target, &wl->network_list, list) { |
| if (!compare_ether_addr(&target->hwinfo->bssid[2], |
| &scan_info->bssid[2])) { |
| found = 1; |
| pr_debug("%s: same BBS found scanned list\n", |
| __func__); |
| break; |
| } |
| if (!oldest || |
| (target->last_scanned < oldest->last_scanned)) |
| oldest = target; |
| } |
| |
| if (!found) { |
| /* not found in the list */ |
| if (list_empty(&wl->network_free_list)) { |
| /* expire oldest */ |
| target = oldest; |
| } else { |
| target = list_entry(wl->network_free_list.next, |
| struct gelic_wl_scan_info, |
| list); |
| } |
| } |
| |
| /* update the item */ |
| target->last_scanned = this_time; |
| target->valid = 1; |
| target->eurus_index = i; |
| kfree(target->hwinfo); |
| target->hwinfo = kzalloc(be16_to_cpu(scan_info->size), |
| GFP_KERNEL); |
| if (!target->hwinfo) { |
| pr_info("%s: kzalloc failed\n", __func__); |
| continue; |
| } |
| /* copy hw scan info */ |
| memcpy(target->hwinfo, scan_info, scan_info->size); |
| target->essid_len = strnlen(scan_info->essid, |
| sizeof(scan_info->essid)); |
| target->rate_len = 0; |
| for (r = 0; r < 12; r++) |
| if (scan_info->rate[r]) |
| target->rate_len++; |
| if (8 < target->rate_len) |
| pr_info("%s: AP returns %d rates\n", __func__, |
| target->rate_len); |
| target->rate_ext_len = 0; |
| for (r = 0; r < 16; r++) |
| if (scan_info->ext_rate[r]) |
| target->rate_ext_len++; |
| list_move_tail(&target->list, &wl->network_list); |
| } |
| memset(&data, 0, sizeof(data)); |
| wireless_send_event(port_to_netdev(wl_port(wl)), SIOCGIWSCAN, &data, |
| NULL); |
| out: |
| free_page((unsigned long)buf); |
| complete(&wl->scan_done); |
| mutex_unlock(&wl->scan_lock); |
| pr_debug("%s:end\n", __func__); |
| } |
| |
| /* |
| * Select an appropriate bss from current scan list regarding |
| * current settings from userspace. |
| * The caller must hold wl->scan_lock, |
| * and on the state of wl->scan_state == GELIC_WL_SCAN_GOT_LIST |
| */ |
| static void update_best(struct gelic_wl_scan_info **best, |
| struct gelic_wl_scan_info *candid, |
| int *best_weight, |
| int *weight) |
| { |
| if (*best_weight < ++(*weight)) { |
| *best_weight = *weight; |
| *best = candid; |
| } |
| } |
| |
| static |
| struct gelic_wl_scan_info *gelic_wl_find_best_bss(struct gelic_wl_info *wl) |
| { |
| struct gelic_wl_scan_info *scan_info; |
| struct gelic_wl_scan_info *best_bss; |
| int weight, best_weight; |
| u16 security; |
| |
| pr_debug("%s: <-\n", __func__); |
| |
| best_bss = NULL; |
| best_weight = 0; |
| |
| list_for_each_entry(scan_info, &wl->network_list, list) { |
| pr_debug("%s: station %p\n", __func__, scan_info); |
| |
| if (!scan_info->valid) { |
| pr_debug("%s: station invalid\n", __func__); |
| continue; |
| } |
| |
| /* If bss specified, check it only */ |
| if (test_bit(GELIC_WL_STAT_BSSID_SET, &wl->stat)) { |
| if (!compare_ether_addr(&scan_info->hwinfo->bssid[2], |
| wl->bssid)) { |
| best_bss = scan_info; |
| pr_debug("%s: bssid matched\n", __func__); |
| break; |
| } else { |
| pr_debug("%s: bssid unmached\n", __func__); |
| continue; |
| } |
| } |
| |
| weight = 0; |
| |
| /* security */ |
| security = be16_to_cpu(scan_info->hwinfo->security) & |
| GELIC_EURUS_SCAN_SEC_MASK; |
| if (wl->wpa_level == GELIC_WL_WPA_LEVEL_WPA2) { |
| if (security == GELIC_EURUS_SCAN_SEC_WPA2) |
| update_best(&best_bss, scan_info, |
| &best_weight, &weight); |
| else |
| continue; |
| } else if (wl->wpa_level == GELIC_WL_WPA_LEVEL_WPA) { |
| if (security == GELIC_EURUS_SCAN_SEC_WPA) |
| update_best(&best_bss, scan_info, |
| &best_weight, &weight); |
| else |
| continue; |
| } else if (wl->wpa_level == GELIC_WL_WPA_LEVEL_NONE && |
| wl->group_cipher_method == GELIC_WL_CIPHER_WEP) { |
| if (security == GELIC_EURUS_SCAN_SEC_WEP) |
| update_best(&best_bss, scan_info, |
| &best_weight, &weight); |
| else |
| continue; |
| } |
| |
| /* If ESSID is set, check it */ |
| if (test_bit(GELIC_WL_STAT_ESSID_SET, &wl->stat)) { |
| if ((scan_info->essid_len == wl->essid_len) && |
| !strncmp(wl->essid, |
| scan_info->hwinfo->essid, |
| scan_info->essid_len)) |
| update_best(&best_bss, scan_info, |
| &best_weight, &weight); |
| else |
| continue; |
| } |
| } |
| |
| #ifdef DEBUG |
| pr_debug("%s: -> bss=%p\n", __func__, best_bss); |
| if (best_bss) { |
| pr_debug("%s:addr=%pM\n", __func__, |
| &best_bss->hwinfo->bssid[2]); |
| } |
| #endif |
| return best_bss; |
| } |
| |
| /* |
| * Setup WEP configuration to the chip |
| * The caller must hold wl->scan_lock, |
| * and on the state of wl->scan_state == GELIC_WL_SCAN_GOT_LIST |
| */ |
| static int gelic_wl_do_wep_setup(struct gelic_wl_info *wl) |
| { |
| unsigned int i; |
| struct gelic_eurus_wep_cfg *wep; |
| struct gelic_eurus_cmd *cmd; |
| int wep104 = 0; |
| int have_key = 0; |
| int ret = 0; |
| |
| pr_debug("%s: <-\n", __func__); |
| /* we can assume no one should uses the buffer */ |
| wep = (struct gelic_eurus_wep_cfg *)__get_free_page(GFP_KERNEL); |
| if (!wep) |
| return -ENOMEM; |
| |
| memset(wep, 0, sizeof(*wep)); |
| |
| if (wl->group_cipher_method == GELIC_WL_CIPHER_WEP) { |
| pr_debug("%s: WEP mode\n", __func__); |
| for (i = 0; i < GELIC_WEP_KEYS; i++) { |
| if (!test_bit(i, &wl->key_enabled)) |
| continue; |
| |
| pr_debug("%s: key#%d enabled\n", __func__, i); |
| have_key = 1; |
| if (wl->key_len[i] == 13) |
| wep104 = 1; |
| else if (wl->key_len[i] != 5) { |
| pr_info("%s: wrong wep key[%d]=%d\n", |
| __func__, i, wl->key_len[i]); |
| ret = -EINVAL; |
| goto out; |
| } |
| memcpy(wep->key[i], wl->key[i], wl->key_len[i]); |
| } |
| |
| if (!have_key) { |
| pr_info("%s: all wep key disabled\n", __func__); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| if (wep104) { |
| pr_debug("%s: 104bit key\n", __func__); |
| wep->security = cpu_to_be16(GELIC_EURUS_WEP_SEC_104BIT); |
| } else { |
| pr_debug("%s: 40bit key\n", __func__); |
| wep->security = cpu_to_be16(GELIC_EURUS_WEP_SEC_40BIT); |
| } |
| } else { |
| pr_debug("%s: NO encryption\n", __func__); |
| wep->security = cpu_to_be16(GELIC_EURUS_WEP_SEC_NONE); |
| } |
| |
| /* issue wep setup */ |
| cmd = gelic_eurus_sync_cmd(wl, GELIC_EURUS_CMD_SET_WEP_CFG, |
| wep, sizeof(*wep)); |
| if (!cmd) |
| ret = -ENOMEM; |
| else if (cmd->status || cmd->cmd_status) |
| ret = -ENXIO; |
| |
| kfree(cmd); |
| out: |
| free_page((unsigned long)wep); |
| pr_debug("%s: ->\n", __func__); |
| return ret; |
| } |
| |
| #ifdef DEBUG |
| static const char *wpasecstr(enum gelic_eurus_wpa_security sec) |
| { |
| switch (sec) { |
| case GELIC_EURUS_WPA_SEC_NONE: |
| return "NONE"; |
| break; |
| case GELIC_EURUS_WPA_SEC_WPA_TKIP_TKIP: |
| return "WPA_TKIP_TKIP"; |
| break; |
| case GELIC_EURUS_WPA_SEC_WPA_TKIP_AES: |
| return "WPA_TKIP_AES"; |
| break; |
| case GELIC_EURUS_WPA_SEC_WPA_AES_AES: |
| return "WPA_AES_AES"; |
| break; |
| case GELIC_EURUS_WPA_SEC_WPA2_TKIP_TKIP: |
| return "WPA2_TKIP_TKIP"; |
| break; |
| case GELIC_EURUS_WPA_SEC_WPA2_TKIP_AES: |
| return "WPA2_TKIP_AES"; |
| break; |
| case GELIC_EURUS_WPA_SEC_WPA2_AES_AES: |
| return "WPA2_AES_AES"; |
| break; |
| } |
| return ""; |
| }; |
| #endif |
| |
| static int gelic_wl_do_wpa_setup(struct gelic_wl_info *wl) |
| { |
| struct gelic_eurus_wpa_cfg *wpa; |
| struct gelic_eurus_cmd *cmd; |
| u16 security; |
| int ret = 0; |
| |
| pr_debug("%s: <-\n", __func__); |
| /* we can assume no one should uses the buffer */ |
| wpa = (struct gelic_eurus_wpa_cfg *)__get_free_page(GFP_KERNEL); |
| if (!wpa) |
| return -ENOMEM; |
| |
| memset(wpa, 0, sizeof(*wpa)); |
| |
| if (!test_bit(GELIC_WL_STAT_WPA_PSK_SET, &wl->stat)) |
| pr_info("%s: PSK not configured yet\n", __func__); |
| |
| /* copy key */ |
| memcpy(wpa->psk, wl->psk, wl->psk_len); |
| |
| /* set security level */ |
| if (wl->wpa_level == GELIC_WL_WPA_LEVEL_WPA2) { |
| if (wl->group_cipher_method == GELIC_WL_CIPHER_AES) { |
| security = GELIC_EURUS_WPA_SEC_WPA2_AES_AES; |
| } else { |
| if (wl->pairwise_cipher_method == GELIC_WL_CIPHER_AES && |
| precise_ie()) |
| security = GELIC_EURUS_WPA_SEC_WPA2_TKIP_AES; |
| else |
| security = GELIC_EURUS_WPA_SEC_WPA2_TKIP_TKIP; |
| } |
| } else { |
| if (wl->group_cipher_method == GELIC_WL_CIPHER_AES) { |
| security = GELIC_EURUS_WPA_SEC_WPA_AES_AES; |
| } else { |
| if (wl->pairwise_cipher_method == GELIC_WL_CIPHER_AES && |
| precise_ie()) |
| security = GELIC_EURUS_WPA_SEC_WPA_TKIP_AES; |
| else |
| security = GELIC_EURUS_WPA_SEC_WPA_TKIP_TKIP; |
| } |
| } |
| wpa->security = cpu_to_be16(security); |
| |
| /* PSK type */ |
| wpa->psk_type = cpu_to_be16(wl->psk_type); |
| #ifdef DEBUG |
| pr_debug("%s: sec=%s psktype=%s\n", __func__, |
| wpasecstr(wpa->security), |
| (wpa->psk_type == GELIC_EURUS_WPA_PSK_BIN) ? |
| "BIN" : "passphrase"); |
| #if 0 |
| /* |
| * don't enable here if you plan to submit |
| * the debug log because this dumps your precious |
| * passphrase/key. |
| */ |
| pr_debug("%s: psk=%s\n", __func__, |
| (wpa->psk_type == GELIC_EURUS_WPA_PSK_BIN) ? |
| "N/A" : wpa->psk); |
| #endif |
| #endif |
| /* issue wpa setup */ |
| cmd = gelic_eurus_sync_cmd(wl, GELIC_EURUS_CMD_SET_WPA_CFG, |
| wpa, sizeof(*wpa)); |
| if (!cmd) |
| ret = -ENOMEM; |
| else if (cmd->status || cmd->cmd_status) |
| ret = -ENXIO; |
| kfree(cmd); |
| free_page((unsigned long)wpa); |
| pr_debug("%s: --> %d\n", __func__, ret); |
| return ret; |
| } |
| |
| /* |
| * Start association. caller must hold assoc_stat_lock |
| */ |
| static int gelic_wl_associate_bss(struct gelic_wl_info *wl, |
| struct gelic_wl_scan_info *bss) |
| { |
| struct gelic_eurus_cmd *cmd; |
| struct gelic_eurus_common_cfg *common; |
| int ret = 0; |
| unsigned long rc; |
| |
| pr_debug("%s: <-\n", __func__); |
| |
| /* do common config */ |
| common = (struct gelic_eurus_common_cfg *)__get_free_page(GFP_KERNEL); |
| if (!common) |
| return -ENOMEM; |
| |
| memset(common, 0, sizeof(*common)); |
| common->bss_type = cpu_to_be16(GELIC_EURUS_BSS_INFRA); |
| common->op_mode = cpu_to_be16(GELIC_EURUS_OPMODE_11BG); |
| |
| common->scan_index = cpu_to_be16(bss->eurus_index); |
| switch (wl->auth_method) { |
| case GELIC_EURUS_AUTH_OPEN: |
| common->auth_method = cpu_to_be16(GELIC_EURUS_AUTH_OPEN); |
| break; |
| case GELIC_EURUS_AUTH_SHARED: |
| common->auth_method = cpu_to_be16(GELIC_EURUS_AUTH_SHARED); |
| break; |
| } |
| |
| #ifdef DEBUG |
| scan_list_dump(wl); |
| #endif |
| pr_debug("%s: common cfg index=%d bsstype=%d auth=%d\n", __func__, |
| be16_to_cpu(common->scan_index), |
| be16_to_cpu(common->bss_type), |
| be16_to_cpu(common->auth_method)); |
| |
| cmd = gelic_eurus_sync_cmd(wl, GELIC_EURUS_CMD_SET_COMMON_CFG, |
| common, sizeof(*common)); |
| if (!cmd || cmd->status || cmd->cmd_status) { |
| ret = -ENOMEM; |
| kfree(cmd); |
| goto out; |
| } |
| kfree(cmd); |
| |
| /* WEP/WPA */ |
| switch (wl->wpa_level) { |
| case GELIC_WL_WPA_LEVEL_NONE: |
| /* If WEP or no security, setup WEP config */ |
| ret = gelic_wl_do_wep_setup(wl); |
| break; |
| case GELIC_WL_WPA_LEVEL_WPA: |
| case GELIC_WL_WPA_LEVEL_WPA2: |
| ret = gelic_wl_do_wpa_setup(wl); |
| break; |
| }; |
| |
| if (ret) { |
| pr_debug("%s: WEP/WPA setup failed %d\n", __func__, |
| ret); |
| ret = -EPERM; |
| gelic_wl_send_iwap_event(wl, NULL); |
| goto out; |
| } |
| |
| /* start association */ |
| init_completion(&wl->assoc_done); |
| wl->assoc_stat = GELIC_WL_ASSOC_STAT_ASSOCIATING; |
| cmd = gelic_eurus_sync_cmd(wl, GELIC_EURUS_CMD_ASSOC, |
| NULL, 0); |
| if (!cmd || cmd->status || cmd->cmd_status) { |
| pr_debug("%s: assoc request failed\n", __func__); |
| wl->assoc_stat = GELIC_WL_ASSOC_STAT_DISCONN; |
| kfree(cmd); |
| ret = -ENOMEM; |
| gelic_wl_send_iwap_event(wl, NULL); |
| goto out; |
| } |
| kfree(cmd); |
| |
| /* wait for connected event */ |
| rc = wait_for_completion_timeout(&wl->assoc_done, HZ * 4);/*FIXME*/ |
| |
| if (!rc) { |
| /* timeouted. Maybe key or cyrpt mode is wrong */ |
| pr_info("%s: connect timeout \n", __func__); |
| cmd = gelic_eurus_sync_cmd(wl, GELIC_EURUS_CMD_DISASSOC, |
| NULL, 0); |
| kfree(cmd); |
| wl->assoc_stat = GELIC_WL_ASSOC_STAT_DISCONN; |
| gelic_wl_send_iwap_event(wl, NULL); |
| ret = -ENXIO; |
| } else { |
| wl->assoc_stat = GELIC_WL_ASSOC_STAT_ASSOCIATED; |
| /* copy bssid */ |
| memcpy(wl->active_bssid, &bss->hwinfo->bssid[2], ETH_ALEN); |
| |
| /* send connect event */ |
| gelic_wl_send_iwap_event(wl, wl->active_bssid); |
| pr_info("%s: connected\n", __func__); |
| } |
| out: |
| free_page((unsigned long)common); |
| pr_debug("%s: ->\n", __func__); |
| return ret; |
| } |
| |
| /* |
| * connected event |
| */ |
| static void gelic_wl_connected_event(struct gelic_wl_info *wl, |
| u64 event) |
| { |
| u64 desired_event = 0; |
| |
| switch (wl->wpa_level) { |
| case GELIC_WL_WPA_LEVEL_NONE: |
| desired_event = GELIC_LV1_WL_EVENT_CONNECTED; |
| break; |
| case GELIC_WL_WPA_LEVEL_WPA: |
| case GELIC_WL_WPA_LEVEL_WPA2: |
| desired_event = GELIC_LV1_WL_EVENT_WPA_CONNECTED; |
| break; |
| } |
| |
| if (desired_event == event) { |
| pr_debug("%s: completed \n", __func__); |
| complete(&wl->assoc_done); |
| netif_carrier_on(port_to_netdev(wl_port(wl))); |
| } else |
| pr_debug("%s: event %#llx under wpa\n", |
| __func__, event); |
| } |
| |
| /* |
| * disconnect event |
| */ |
| static void gelic_wl_disconnect_event(struct gelic_wl_info *wl, |
| u64 event) |
| { |
| struct gelic_eurus_cmd *cmd; |
| int lock; |
| |
| /* |
| * If we fall here in the middle of association, |
| * associate_bss() should be waiting for complation of |
| * wl->assoc_done. |
| * As it waits with timeout, just leave assoc_done |
| * uncompleted, then it terminates with timeout |
| */ |
| if (!mutex_trylock(&wl->assoc_stat_lock)) { |
| pr_debug("%s: already locked\n", __func__); |
| lock = 0; |
| } else { |
| pr_debug("%s: obtain lock\n", __func__); |
| lock = 1; |
| } |
| |
| cmd = gelic_eurus_sync_cmd(wl, GELIC_EURUS_CMD_DISASSOC, NULL, 0); |
| kfree(cmd); |
| |
| /* send disconnected event to the supplicant */ |
| if (wl->assoc_stat == GELIC_WL_ASSOC_STAT_ASSOCIATED) |
| gelic_wl_send_iwap_event(wl, NULL); |
| |
| wl->assoc_stat = GELIC_WL_ASSOC_STAT_DISCONN; |
| netif_carrier_off(port_to_netdev(wl_port(wl))); |
| |
| if (lock) |
| mutex_unlock(&wl->assoc_stat_lock); |
| } |
| /* |
| * event worker |
| */ |
| #ifdef DEBUG |
| static const char *eventstr(enum gelic_lv1_wl_event event) |
| { |
| static char buf[32]; |
| char *ret; |
| if (event & GELIC_LV1_WL_EVENT_DEVICE_READY) |
| ret = "EURUS_READY"; |
| else if (event & GELIC_LV1_WL_EVENT_SCAN_COMPLETED) |
| ret = "SCAN_COMPLETED"; |
| else if (event & GELIC_LV1_WL_EVENT_DEAUTH) |
| ret = "DEAUTH"; |
| else if (event & GELIC_LV1_WL_EVENT_BEACON_LOST) |
| ret = "BEACON_LOST"; |
| else if (event & GELIC_LV1_WL_EVENT_CONNECTED) |
| ret = "CONNECTED"; |
| else if (event & GELIC_LV1_WL_EVENT_WPA_CONNECTED) |
| ret = "WPA_CONNECTED"; |
| else if (event & GELIC_LV1_WL_EVENT_WPA_ERROR) |
| ret = "WPA_ERROR"; |
| else { |
| sprintf(buf, "Unknown(%#x)", event); |
| ret = buf; |
| } |
| return ret; |
| } |
| #else |
| static const char *eventstr(enum gelic_lv1_wl_event event) |
| { |
| return NULL; |
| } |
| #endif |
| static void gelic_wl_event_worker(struct work_struct *work) |
| { |
| struct gelic_wl_info *wl; |
| struct gelic_port *port; |
| u64 event, tmp; |
| int status; |
| |
| pr_debug("%s:start\n", __func__); |
| wl = container_of(work, struct gelic_wl_info, event_work.work); |
| port = wl_port(wl); |
| while (1) { |
| status = lv1_net_control(bus_id(port->card), dev_id(port->card), |
| GELIC_LV1_GET_WLAN_EVENT, 0, 0, 0, |
| &event, &tmp); |
| if (status) { |
| if (status != LV1_NO_ENTRY) |
| pr_debug("%s:wlan event failed %d\n", |
| __func__, status); |
| /* got all events */ |
| pr_debug("%s:end\n", __func__); |
| return; |
| } |
| pr_debug("%s: event=%s\n", __func__, eventstr(event)); |
| switch (event) { |
| case GELIC_LV1_WL_EVENT_SCAN_COMPLETED: |
| gelic_wl_scan_complete_event(wl); |
| break; |
| case GELIC_LV1_WL_EVENT_BEACON_LOST: |
| case GELIC_LV1_WL_EVENT_DEAUTH: |
| gelic_wl_disconnect_event(wl, event); |
| break; |
| case GELIC_LV1_WL_EVENT_CONNECTED: |
| case GELIC_LV1_WL_EVENT_WPA_CONNECTED: |
| gelic_wl_connected_event(wl, event); |
| break; |
| default: |
| break; |
| } |
| } /* while */ |
| } |
| /* |
| * association worker |
| */ |
| static void gelic_wl_assoc_worker(struct work_struct *work) |
| { |
| struct gelic_wl_info *wl; |
| |
| struct gelic_wl_scan_info *best_bss; |
| int ret; |
| unsigned long irqflag; |
| u8 *essid; |
| size_t essid_len; |
| |
| wl = container_of(work, struct gelic_wl_info, assoc_work.work); |
| |
| mutex_lock(&wl->assoc_stat_lock); |
| |
| if (wl->assoc_stat != GELIC_WL_ASSOC_STAT_DISCONN) |
| goto out; |
| |
| spin_lock_irqsave(&wl->lock, irqflag); |
| if (test_bit(GELIC_WL_STAT_ESSID_SET, &wl->stat)) { |
| pr_debug("%s: assoc ESSID configured %s\n", __func__, |
| wl->essid); |
| essid = wl->essid; |
| essid_len = wl->essid_len; |
| } else { |
| essid = NULL; |
| essid_len = 0; |
| } |
| spin_unlock_irqrestore(&wl->lock, irqflag); |
| |
| ret = gelic_wl_start_scan(wl, 0, essid, essid_len); |
| if (ret == -ERESTARTSYS) { |
| pr_debug("%s: scan start failed association\n", __func__); |
| schedule_delayed_work(&wl->assoc_work, HZ/10); /*FIXME*/ |
| goto out; |
| } else if (ret) { |
| pr_info("%s: scan prerequisite failed\n", __func__); |
| goto out; |
| } |
| |
| /* |
| * Wait for bss scan completion |
| * If we have scan list already, gelic_wl_start_scan() |
| * returns OK and raises the complete. Thus, |
| * it's ok to wait unconditionally here |
| */ |
| wait_for_completion(&wl->scan_done); |
| |
| pr_debug("%s: scan done\n", __func__); |
| mutex_lock(&wl->scan_lock); |
| if (wl->scan_stat != GELIC_WL_SCAN_STAT_GOT_LIST) { |
| gelic_wl_send_iwap_event(wl, NULL); |
| pr_info("%s: no scan list. association failed\n", __func__); |
| goto scan_lock_out; |
| } |
| |
| /* find best matching bss */ |
| best_bss = gelic_wl_find_best_bss(wl); |
| if (!best_bss) { |
| gelic_wl_send_iwap_event(wl, NULL); |
| pr_info("%s: no bss matched. association failed\n", __func__); |
| goto scan_lock_out; |
| } |
| |
| /* ok, do association */ |
| ret = gelic_wl_associate_bss(wl, best_bss); |
| if (ret) |
| pr_info("%s: association failed %d\n", __func__, ret); |
| scan_lock_out: |
| mutex_unlock(&wl->scan_lock); |
| out: |
| mutex_unlock(&wl->assoc_stat_lock); |
| } |
| /* |
| * Interrupt handler |
| * Called from the ethernet interrupt handler |
| * Processes wireless specific virtual interrupts only |
| */ |
| void gelic_wl_interrupt(struct net_device *netdev, u64 status) |
| { |
| struct gelic_wl_info *wl = port_wl(netdev_priv(netdev)); |
| |
| if (status & GELIC_CARD_WLAN_COMMAND_COMPLETED) { |
| pr_debug("%s:cmd complete\n", __func__); |
| complete(&wl->cmd_done_intr); |
| } |
| |
| if (status & GELIC_CARD_WLAN_EVENT_RECEIVED) { |
| pr_debug("%s:event received\n", __func__); |
| queue_delayed_work(wl->event_queue, &wl->event_work, 0); |
| } |
| } |
| |
| /* |
| * driver helpers |
| */ |
| static const iw_handler gelic_wl_wext_handler[] = |
| { |
| IW_HANDLER(SIOCGIWNAME, gelic_wl_get_name), |
| IW_HANDLER(SIOCGIWRANGE, gelic_wl_get_range), |
| IW_HANDLER(SIOCSIWSCAN, gelic_wl_set_scan), |
| IW_HANDLER(SIOCGIWSCAN, gelic_wl_get_scan), |
| IW_HANDLER(SIOCSIWAUTH, gelic_wl_set_auth), |
| IW_HANDLER(SIOCGIWAUTH, gelic_wl_get_auth), |
| IW_HANDLER(SIOCSIWESSID, gelic_wl_set_essid), |
| IW_HANDLER(SIOCGIWESSID, gelic_wl_get_essid), |
| IW_HANDLER(SIOCSIWENCODE, gelic_wl_set_encode), |
| IW_HANDLER(SIOCGIWENCODE, gelic_wl_get_encode), |
| IW_HANDLER(SIOCSIWAP, gelic_wl_set_ap), |
| IW_HANDLER(SIOCGIWAP, gelic_wl_get_ap), |
| IW_HANDLER(SIOCSIWENCODEEXT, gelic_wl_set_encodeext), |
| IW_HANDLER(SIOCGIWENCODEEXT, gelic_wl_get_encodeext), |
| IW_HANDLER(SIOCSIWMODE, gelic_wl_set_mode), |
| IW_HANDLER(SIOCGIWMODE, gelic_wl_get_mode), |
| IW_HANDLER(SIOCGIWNICKN, gelic_wl_get_nick), |
| }; |
| |
| static const struct iw_handler_def gelic_wl_wext_handler_def = { |
| .num_standard = ARRAY_SIZE(gelic_wl_wext_handler), |
| .standard = gelic_wl_wext_handler, |
| .get_wireless_stats = gelic_wl_get_wireless_stats, |
| }; |
| |
| static struct net_device * __devinit gelic_wl_alloc(struct gelic_card *card) |
| { |
| struct net_device *netdev; |
| struct gelic_port *port; |
| struct gelic_wl_info *wl; |
| unsigned int i; |
| |
| pr_debug("%s:start\n", __func__); |
| netdev = alloc_etherdev(sizeof(struct gelic_port) + |
| sizeof(struct gelic_wl_info)); |
| pr_debug("%s: netdev =%p card=%p \np", __func__, netdev, card); |
| if (!netdev) |
| return NULL; |
| |
| strcpy(netdev->name, "wlan%d"); |
| |
| port = netdev_priv(netdev); |
| port->netdev = netdev; |
| port->card = card; |
| port->type = GELIC_PORT_WIRELESS; |
| |
| wl = port_wl(port); |
| pr_debug("%s: wl=%p port=%p\n", __func__, wl, port); |
| |
| /* allocate scan list */ |
| wl->networks = kzalloc(sizeof(struct gelic_wl_scan_info) * |
| GELIC_WL_BSS_MAX_ENT, GFP_KERNEL); |
| |
| if (!wl->networks) |
| goto fail_bss; |
| |
| wl->eurus_cmd_queue = create_singlethread_workqueue("gelic_cmd"); |
| if (!wl->eurus_cmd_queue) |
| goto fail_cmd_workqueue; |
| |
| wl->event_queue = create_singlethread_workqueue("gelic_event"); |
| if (!wl->event_queue) |
| goto fail_event_workqueue; |
| |
| INIT_LIST_HEAD(&wl->network_free_list); |
| INIT_LIST_HEAD(&wl->network_list); |
| for (i = 0; i < GELIC_WL_BSS_MAX_ENT; i++) |
| list_add_tail(&wl->networks[i].list, |
| &wl->network_free_list); |
| init_completion(&wl->cmd_done_intr); |
| |
| INIT_DELAYED_WORK(&wl->event_work, gelic_wl_event_worker); |
| INIT_DELAYED_WORK(&wl->assoc_work, gelic_wl_assoc_worker); |
| mutex_init(&wl->scan_lock); |
| mutex_init(&wl->assoc_stat_lock); |
| |
| init_completion(&wl->scan_done); |
| /* for the case that no scan request is issued and stop() is called */ |
| complete(&wl->scan_done); |
| |
| spin_lock_init(&wl->lock); |
| |
| wl->scan_age = 5*HZ; /* FIXME */ |
| |
| /* buffer for receiving scanned list etc */ |
| BUILD_BUG_ON(PAGE_SIZE < |
| sizeof(struct gelic_eurus_scan_info) * |
| GELIC_EURUS_MAX_SCAN); |
| pr_debug("%s:end\n", __func__); |
| return netdev; |
| |
| fail_event_workqueue: |
| destroy_workqueue(wl->eurus_cmd_queue); |
| fail_cmd_workqueue: |
| kfree(wl->networks); |
| fail_bss: |
| free_netdev(netdev); |
| pr_debug("%s:end error\n", __func__); |
| return NULL; |
| |
| } |
| |
| static void gelic_wl_free(struct gelic_wl_info *wl) |
| { |
| struct gelic_wl_scan_info *scan_info; |
| unsigned int i; |
| |
| pr_debug("%s: <-\n", __func__); |
| |
| pr_debug("%s: destroy queues\n", __func__); |
| destroy_workqueue(wl->eurus_cmd_queue); |
| destroy_workqueue(wl->event_queue); |
| |
| scan_info = wl->networks; |
| for (i = 0; i < GELIC_WL_BSS_MAX_ENT; i++, scan_info++) |
| kfree(scan_info->hwinfo); |
| kfree(wl->networks); |
| |
| free_netdev(port_to_netdev(wl_port(wl))); |
| |
| pr_debug("%s: ->\n", __func__); |
| } |
| |
| static int gelic_wl_try_associate(struct net_device *netdev) |
| { |
| struct gelic_wl_info *wl = port_wl(netdev_priv(netdev)); |
| int ret = -1; |
| unsigned int i; |
| |
| pr_debug("%s: <-\n", __func__); |
| |
| /* check constraits for start association */ |
| /* for no access restriction AP */ |
| if (wl->group_cipher_method == GELIC_WL_CIPHER_NONE) { |
| if (test_bit(GELIC_WL_STAT_CONFIGURED, |
| &wl->stat)) |
| goto do_associate; |
| else { |
| pr_debug("%s: no wep, not configured\n", __func__); |
| return ret; |
| } |
| } |
| |
| /* for WEP, one of four keys should be set */ |
| if (wl->group_cipher_method == GELIC_WL_CIPHER_WEP) { |
| /* one of keys set */ |
| for (i = 0; i < GELIC_WEP_KEYS; i++) { |
| if (test_bit(i, &wl->key_enabled)) |
| goto do_associate; |
| } |
| pr_debug("%s: WEP, but no key specified\n", __func__); |
| return ret; |
| } |
| |
| /* for WPA[2], psk should be set */ |
| if ((wl->group_cipher_method == GELIC_WL_CIPHER_TKIP) || |
| (wl->group_cipher_method == GELIC_WL_CIPHER_AES)) { |
| if (test_bit(GELIC_WL_STAT_WPA_PSK_SET, |
| &wl->stat)) |
| goto do_associate; |
| else { |
| pr_debug("%s: AES/TKIP, but PSK not configured\n", |
| __func__); |
| return ret; |
| } |
| } |
| |
| do_associate: |
| ret = schedule_delayed_work(&wl->assoc_work, 0); |
| pr_debug("%s: start association work %d\n", __func__, ret); |
| return ret; |
| } |
| |
| /* |
| * netdev handlers |
| */ |
| static int gelic_wl_open(struct net_device *netdev) |
| { |
| struct gelic_card *card = netdev_card(netdev); |
| |
| pr_debug("%s:->%p\n", __func__, netdev); |
| |
| gelic_card_up(card); |
| |
| /* try to associate */ |
| gelic_wl_try_associate(netdev); |
| |
| netif_start_queue(netdev); |
| |
| pr_debug("%s:<-\n", __func__); |
| return 0; |
| } |
| |
| /* |
| * reset state machine |
| */ |
| static int gelic_wl_reset_state(struct gelic_wl_info *wl) |
| { |
| struct gelic_wl_scan_info *target; |
| struct gelic_wl_scan_info *tmp; |
| |
| /* empty scan list */ |
| list_for_each_entry_safe(target, tmp, &wl->network_list, list) { |
| list_move_tail(&target->list, &wl->network_free_list); |
| } |
| wl->scan_stat = GELIC_WL_SCAN_STAT_INIT; |
| |
| /* clear configuration */ |
| wl->auth_method = GELIC_EURUS_AUTH_OPEN; |
| wl->group_cipher_method = GELIC_WL_CIPHER_NONE; |
| wl->pairwise_cipher_method = GELIC_WL_CIPHER_NONE; |
| wl->wpa_level = GELIC_WL_WPA_LEVEL_NONE; |
| |
| wl->key_enabled = 0; |
| wl->current_key = 0; |
| |
| wl->psk_type = GELIC_EURUS_WPA_PSK_PASSPHRASE; |
| wl->psk_len = 0; |
| |
| wl->essid_len = 0; |
| memset(wl->essid, 0, sizeof(wl->essid)); |
| memset(wl->bssid, 0, sizeof(wl->bssid)); |
| memset(wl->active_bssid, 0, sizeof(wl->active_bssid)); |
| |
| wl->assoc_stat = GELIC_WL_ASSOC_STAT_DISCONN; |
| |
| memset(&wl->iwstat, 0, sizeof(wl->iwstat)); |
| /* all status bit clear */ |
| wl->stat = 0; |
| return 0; |
| } |
| |
| /* |
| * Tell eurus to terminate association |
| */ |
| static void gelic_wl_disconnect(struct net_device *netdev) |
| { |
| struct gelic_port *port = netdev_priv(netdev); |
| struct gelic_wl_info *wl = port_wl(port); |
| struct gelic_eurus_cmd *cmd; |
| |
| /* |
| * If scann process is running on chip, |
| * further requests will be rejected |
| */ |
| if (wl->scan_stat == GELIC_WL_SCAN_STAT_SCANNING) |
| wait_for_completion_timeout(&wl->scan_done, HZ); |
| |
| cmd = gelic_eurus_sync_cmd(wl, GELIC_EURUS_CMD_DISASSOC, NULL, 0); |
| kfree(cmd); |
| gelic_wl_send_iwap_event(wl, NULL); |
| }; |
| |
| static int gelic_wl_stop(struct net_device *netdev) |
| { |
| struct gelic_port *port = netdev_priv(netdev); |
| struct gelic_wl_info *wl = port_wl(port); |
| struct gelic_card *card = netdev_card(netdev); |
| |
| pr_debug("%s:<-\n", __func__); |
| |
| /* |
| * Cancel pending association work. |
| * event work can run after netdev down |
| */ |
| cancel_delayed_work(&wl->assoc_work); |
| |
| if (wl->assoc_stat == GELIC_WL_ASSOC_STAT_ASSOCIATED) |
| gelic_wl_disconnect(netdev); |
| |
| /* reset our state machine */ |
| gelic_wl_reset_state(wl); |
| |
| netif_stop_queue(netdev); |
| |
| gelic_card_down(card); |
| |
| pr_debug("%s:->\n", __func__); |
| return 0; |
| } |
| |
| /* -- */ |
| |
| static const struct net_device_ops gelic_wl_netdevice_ops = { |
| .ndo_open = gelic_wl_open, |
| .ndo_stop = gelic_wl_stop, |
| .ndo_start_xmit = gelic_net_xmit, |
| .ndo_set_multicast_list = gelic_net_set_multi, |
| .ndo_change_mtu = gelic_net_change_mtu, |
| .ndo_tx_timeout = gelic_net_tx_timeout, |
| .ndo_set_mac_address = eth_mac_addr, |
| .ndo_validate_addr = eth_validate_addr, |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| .ndo_poll_controller = gelic_net_poll_controller, |
| #endif |
| }; |
| |
| static const struct ethtool_ops gelic_wl_ethtool_ops = { |
| .get_drvinfo = gelic_net_get_drvinfo, |
| .get_link = gelic_wl_get_link, |
| .get_tx_csum = ethtool_op_get_tx_csum, |
| .set_tx_csum = ethtool_op_set_tx_csum, |
| .get_rx_csum = gelic_net_get_rx_csum, |
| .set_rx_csum = gelic_net_set_rx_csum, |
| }; |
| |
| static void __devinit gelic_wl_setup_netdev_ops(struct net_device *netdev) |
| { |
| struct gelic_wl_info *wl; |
| wl = port_wl(netdev_priv(netdev)); |
| BUG_ON(!wl); |
| netdev->watchdog_timeo = GELIC_NET_WATCHDOG_TIMEOUT; |
| |
| netdev->ethtool_ops = &gelic_wl_ethtool_ops; |
| netdev->netdev_ops = &gelic_wl_netdevice_ops; |
| netdev->wireless_data = &wl->wireless_data; |
| netdev->wireless_handlers = &gelic_wl_wext_handler_def; |
| } |
| |
| /* |
| * driver probe/remove |
| */ |
| int __devinit gelic_wl_driver_probe(struct gelic_card *card) |
| { |
| int ret; |
| struct net_device *netdev; |
| |
| pr_debug("%s:start\n", __func__); |
| |
| if (ps3_compare_firmware_version(1, 6, 0) < 0) |
| return 0; |
| if (!card->vlan[GELIC_PORT_WIRELESS].tx) |
| return 0; |
| |
| /* alloc netdevice for wireless */ |
| netdev = gelic_wl_alloc(card); |
| if (!netdev) |
| return -ENOMEM; |
| |
| /* setup net_device structure */ |
| SET_NETDEV_DEV(netdev, &card->dev->core); |
| gelic_wl_setup_netdev_ops(netdev); |
| |
| /* setup some of net_device and register it */ |
| ret = gelic_net_setup_netdev(netdev, card); |
| if (ret) |
| goto fail_setup; |
| card->netdev[GELIC_PORT_WIRELESS] = netdev; |
| |
| /* add enable wireless interrupt */ |
| card->irq_mask |= GELIC_CARD_WLAN_EVENT_RECEIVED | |
| GELIC_CARD_WLAN_COMMAND_COMPLETED; |
| /* to allow wireless commands while both interfaces are down */ |
| gelic_card_set_irq_mask(card, GELIC_CARD_WLAN_EVENT_RECEIVED | |
| GELIC_CARD_WLAN_COMMAND_COMPLETED); |
| pr_debug("%s:end\n", __func__); |
| return 0; |
| |
| fail_setup: |
| gelic_wl_free(port_wl(netdev_port(netdev))); |
| |
| return ret; |
| } |
| |
| int gelic_wl_driver_remove(struct gelic_card *card) |
| { |
| struct gelic_wl_info *wl; |
| struct net_device *netdev; |
| |
| pr_debug("%s:start\n", __func__); |
| |
| if (ps3_compare_firmware_version(1, 6, 0) < 0) |
| return 0; |
| if (!card->vlan[GELIC_PORT_WIRELESS].tx) |
| return 0; |
| |
| netdev = card->netdev[GELIC_PORT_WIRELESS]; |
| wl = port_wl(netdev_priv(netdev)); |
| |
| /* if the interface was not up, but associated */ |
| if (wl->assoc_stat == GELIC_WL_ASSOC_STAT_ASSOCIATED) |
| gelic_wl_disconnect(netdev); |
| |
| complete(&wl->cmd_done_intr); |
| |
| /* cancel all work queue */ |
| cancel_delayed_work(&wl->assoc_work); |
| cancel_delayed_work(&wl->event_work); |
| flush_workqueue(wl->eurus_cmd_queue); |
| flush_workqueue(wl->event_queue); |
| |
| unregister_netdev(netdev); |
| |
| /* disable wireless interrupt */ |
| pr_debug("%s: disable intr\n", __func__); |
| card->irq_mask &= ~(GELIC_CARD_WLAN_EVENT_RECEIVED | |
| GELIC_CARD_WLAN_COMMAND_COMPLETED); |
| /* free bss list, netdev*/ |
| gelic_wl_free(wl); |
| pr_debug("%s:end\n", __func__); |
| return 0; |
| } |