blob: f94b5c523358480a911f60a042c8573f3497c02d [file] [log] [blame]
/* Copyright (c) 2012, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef _LINUX_SPMI_H
#define _LINUX_SPMI_H
#include <linux/types.h>
#include <linux/device.h>
#include <linux/mod_devicetable.h>
/* Maximum slave identifier */
#define SPMI_MAX_SLAVE_ID 16
/* SPMI Commands */
enum spmi_commands {
SPMI_CMD_EXT_WRITE = 0x00,
SPMI_CMD_RESET = 0x10,
SPMI_CMD_SLEEP = 0x11,
SPMI_CMD_SHUTDOWN = 0x12,
SPMI_CMD_WAKEUP = 0x13,
SPMI_CMD_AUTHENTICATE = 0x14,
SPMI_CMD_MSTR_READ = 0x15,
SPMI_CMD_MSTR_WRITE = 0x16,
SPMI_CMD_TRANSFER_BUS_OWNERSHIP = 0x1A,
SPMI_CMD_DDB_MASTER_READ = 0x1B,
SPMI_CMD_DDB_SLAVE_READ = 0x1C,
SPMI_CMD_EXT_READ = 0x20,
SPMI_CMD_EXT_WRITEL = 0x30,
SPMI_CMD_EXT_READL = 0x38,
SPMI_CMD_WRITE = 0x40,
SPMI_CMD_READ = 0x60,
SPMI_CMD_ZERO_WRITE = 0x80,
};
struct spmi_device;
/**
* struct spmi_controller: interface to the SPMI master controller
* @nr: board-specific number identifier for this controller/bus
* @name: name for this controller
* @cmd: sends a non-data command sequence on the SPMI bus.
* @read_cmd: sends a register read command sequence on the SPMI bus.
* @write_cmd: sends a register write command sequence on the SPMI bus.
*/
struct spmi_controller {
struct device dev;
unsigned int nr;
struct list_head list;
int (*cmd)(struct spmi_controller *, u8 opcode, u8 sid);
int (*read_cmd)(struct spmi_controller *,
u8 opcode, u8 sid, u16 addr, u8 bc, u8 *buf);
int (*write_cmd)(struct spmi_controller *,
u8 opcode, u8 sid, u16 addr, u8 bc, u8 *buf);
};
#define to_spmi_controller(d) container_of(d, struct spmi_controller, dev)
/**
* struct spmi_driver: Manage SPMI generic/slave device driver
* @probe: binds this driver to a SPMI device.
* @remove: unbinds this driver from the SPMI device.
* @shutdown: standard shutdown callback used during powerdown/halt.
* @suspend: standard suspend callback used during system suspend
* @resume: standard resume callback used during system resume
* @driver: SPMI device drivers should initialize name and owner field of
* this structure
* @id_table: list of SPMI devices supported by this driver
*/
struct spmi_driver {
int (*probe)(struct spmi_device *dev);
int (*remove)(struct spmi_device *dev);
void (*shutdown)(struct spmi_device *dev);
int (*suspend)(struct spmi_device *dev,
pm_message_t pmesg);
int (*resume)(struct spmi_device *dev);
struct device_driver driver;
const struct spmi_device_id *id_table;
};
#define to_spmi_driver(d) container_of(d, struct spmi_driver, driver)
/**
* struct spmi_resource: spmi_resource for one device_node
* @num_resources: number of resources for this device node
* @resources: array of resources for this device_node
* @of_node: device_node of the resource in question
* @label: name used to reference the device from the driver
*
* Note that we explicitly add a 'label' pointer here since per
* the ePAPR 2.2.2, the device_node->name should be generic and not
* reflect precise programming model. Thus label enables a
* platform specific name to be assigned with the 'label' binding to
* allow for unique query names.
*/
struct spmi_resource {
struct resource *resource;
u32 num_resources;
struct device_node *of_node;
const char *label;
};
/**
* Client/device handle (struct spmi_device):
* ------------------------------------------
* This is the client/device handle returned when a SPMI device
* is registered with a controller.
* Pointer to this structure is used by client-driver as a handle.
* @dev: Driver model representation of the device.
* @name: Name of driver to use with this device.
* @ctrl: SPMI controller managing the bus hosting this device.
* @res: SPMI resource for the primary node
* @dev_node: array of SPMI resources when used with spmi-dev-container.
* @num_dev_node: number of device_node structures.
* @sid: Slave Identifier.
*/
struct spmi_device {
struct device dev;
const char *name;
struct spmi_controller *ctrl;
struct spmi_resource res;
struct spmi_resource *dev_node;
u32 num_dev_node;
u8 sid;
};
#define to_spmi_device(d) container_of(d, struct spmi_device, dev)
/**
* struct spmi_boardinfo: Declare board info for SPMI device bringup.
* @name: Name of driver to use with this device.
* @slave_id: slave identifier.
* @spmi_device: device to be registered with the SPMI framework.
* @of_node: pointer to the OpenFirmware device node.
* @res: SPMI resource for the primary node
* @dev_node: array of SPMI resources when used with spmi-dev-container.
* @num_dev_node: number of device_node structures.
* @platform_data: goes to spmi_device.dev.platform_data
*/
struct spmi_boardinfo {
char name[SPMI_NAME_SIZE];
uint8_t slave_id;
struct device_node *of_node;
struct spmi_resource res;
struct spmi_resource *dev_node;
u32 num_dev_node;
const void *platform_data;
};
/**
* spmi_driver_register: Client driver registration with SPMI framework.
* @drv: client driver to be associated with client-device.
*
* This API will register the client driver with the SPMI framework.
* It is called from the driver's module-init function.
*/
extern int spmi_driver_register(struct spmi_driver *drv);
/**
* spmi_driver_unregister - reverse effect of spmi_driver_register
* @sdrv: the driver to unregister
* Context: can sleep
*/
static inline void spmi_driver_unregister(struct spmi_driver *sdrv)
{
if (sdrv)
driver_unregister(&sdrv->driver);
}
/**
* spmi_add_controller: Controller bring-up.
* @ctrl: controller to be registered.
*
* A controller is registered with the framework using this API. ctrl->nr is the
* desired number with which SPMI framework registers the controller.
* Function will return -EBUSY if the number is in use.
*/
extern int spmi_add_controller(struct spmi_controller *ctrl);
/**
* spmi_del_controller: Controller tear-down.
* Controller added with the above API is teared down using this API.
*/
extern int spmi_del_controller(struct spmi_controller *ctrl);
/**
* spmi_busnum_to_ctrl: Map bus number to controller
* @busnum: bus number
*
* Returns controller device representing this bus number
*/
extern struct spmi_controller *spmi_busnum_to_ctrl(u32 bus_num);
/**
* spmi_alloc_device: Allocate a new SPMI devices.
* @ctrl: controller to which this device is to be added to.
* Context: can sleep
*
* Allows a driver to allocate and initialize a SPMI device without
* registering it immediately. This allows a driver to directly fill
* the spmi_device structure before calling spmi_add_device().
*
* Caller is responsible to call spmi_add_device() on the returned
* spmi_device. If the caller needs to discard the spmi_device without
* adding it, then spmi_dev_put() should be called.
*/
extern struct spmi_device *spmi_alloc_device(struct spmi_controller *ctrl);
/**
* spmi_add_device: Add spmi_device allocated with spmi_alloc_device().
* @spmi_dev: spmi_device to be added (registered).
*/
extern int spmi_add_device(struct spmi_device *spmi_dev);
/**
* spmi_new_device: Instantiates a new SPMI device
* @ctrl: controller to which this device is to be added to.
* @info: board information for this device.
*
* Returns the new device or NULL.
*/
extern struct spmi_device *spmi_new_device(struct spmi_controller *ctrl,
struct spmi_boardinfo const *info);
/* spmi_remove_device: Remove the effect of spmi_add_device() */
extern void spmi_remove_device(struct spmi_device *spmi_dev);
#ifdef CONFIG_SPMI
/**
* spmi_register_board_info: Board-initialization routine.
* @bus_num: controller number (bus) on which this device will sit.
* @info: list of all devices on all controllers present on the board.
* @n: number of entries.
*
* API enumerates respective devices on corresponding controller.
* Called from board-init function.
*/
extern int spmi_register_board_info(int busnum,
struct spmi_boardinfo const *info, unsigned n);
#else
static inline int spmi_register_board_info(int busnum,
struct spmi_boardinfo const *info, unsigned n)
{
return 0;
}
#endif
static inline void *spmi_get_ctrldata(const struct spmi_controller *ctrl)
{
return dev_get_drvdata(&ctrl->dev);
}
static inline void spmi_set_ctrldata(struct spmi_controller *ctrl, void *data)
{
dev_set_drvdata(&ctrl->dev, data);
}
static inline void *spmi_get_devicedata(const struct spmi_device *dev)
{
return dev_get_drvdata(&dev->dev);
}
static inline void spmi_set_devicedata(struct spmi_device *dev, void *data)
{
dev_set_drvdata(&dev->dev, data);
}
static inline void spmi_dev_put(struct spmi_device *spmidev)
{
if (spmidev)
put_device(&spmidev->dev);
}
/**
* spmi_register_read() - register read
* @ctrl: SPMI controller.
* @sid: slave identifier.
* @ad: slave register address (5-bit address).
* @buf: buffer to be populated with data from the Slave.
*
* Reads 1 byte of data from a Slave device register.
*/
extern int spmi_register_read(struct spmi_controller *ctrl,
u8 sid, u8 ad, u8 *buf);
/**
* spmi_ext_register_read() - extended register read
* @ctrl: SPMI controller.
* @sid: slave identifier.
* @ad: slave register address (8-bit address).
* @len: the request number of bytes to read (up to 16 bytes).
* @buf: buffer to be populated with data from the Slave.
*
* Reads up to 16 bytes of data from the extended register space on a
* Slave device.
*/
extern int spmi_ext_register_read(struct spmi_controller *ctrl,
u8 sid, u8 ad, u8 *buf, int len);
/**
* spmi_ext_register_readl() - extended register read long
* @ctrl: SPMI controller.
* @sid: slave identifier.
* @ad: slave register address (16-bit address).
* @len: the request number of bytes to read (up to 8 bytes).
* @buf: buffer to be populated with data from the Slave.
*
* Reads up to 8 bytes of data from the extended register space on a
* Slave device using 16-bit address.
*/
extern int spmi_ext_register_readl(struct spmi_controller *ctrl,
u8 sid, u16 ad, u8 *buf, int len);
/**
* spmi_register_write() - register write
* @ctrl: SPMI controller.
* @sid: slave identifier.
* @ad: slave register address (5-bit address).
* @buf: buffer containing the data to be transferred to the Slave.
*
* Writes 1 byte of data to a Slave device register.
*/
extern int spmi_register_write(struct spmi_controller *ctrl,
u8 sid, u8 ad, u8 *buf);
/**
* spmi_register_zero_write() - register zero write
* @ctrl: SPMI controller.
* @sid: slave identifier.
* @data: the data to be written to register 0 (7-bits).
*
* Writes data to register 0 of the Slave device.
*/
extern int spmi_register_zero_write(struct spmi_controller *ctrl,
u8 sid, u8 data);
/**
* spmi_ext_register_write() - extended register write
* @ctrl: SPMI controller.
* @sid: slave identifier.
* @ad: slave register address (8-bit address).
* @buf: buffer containing the data to be transferred to the Slave.
* @len: the request number of bytes to read (up to 16 bytes).
*
* Writes up to 16 bytes of data to the extended register space of a
* Slave device.
*/
extern int spmi_ext_register_write(struct spmi_controller *ctrl,
u8 sid, u8 ad, u8 *buf, int len);
/**
* spmi_ext_register_writel() - extended register write long
* @ctrl: SPMI controller.
* @sid: slave identifier.
* @ad: slave register address (16-bit address).
* @buf: buffer containing the data to be transferred to the Slave.
* @len: the request number of bytes to read (up to 8 bytes).
*
* Writes up to 8 bytes of data to the extended register space of a
* Slave device using 16-bit address.
*/
extern int spmi_ext_register_writel(struct spmi_controller *ctrl,
u8 sid, u16 ad, u8 *buf, int len);
/**
* spmi_command_reset() - sends RESET command to the specified slave
* @ctrl: SPMI controller.
* @sid: slave identifier.
*
* The Reset command initializes the Slave and forces all registers to
* their reset values. The Slave shall enter the STARTUP state after
* receiving a Reset command.
*
* Returns
* -EINVAL for invalid slave identifier.
* -EPERM if the SPMI transaction is denied due to permission issues.
* -EIO if the SPMI transaction fails (parity errors, etc).
* -ETIMEDOUT if the SPMI transaction times out.
*/
extern int spmi_command_reset(struct spmi_controller *ctrl, u8 sid);
/**
* spmi_command_sleep() - sends SLEEP command to the specified slave
* @ctrl: SPMI controller.
* @sid: slave identifier.
*
* The Sleep command causes the Slave to enter the user defined SLEEP state.
*
* Returns
* -EINVAL for invalid slave identifier.
* -EPERM if the SPMI transaction is denied due to permission issues.
* -EIO if the SPMI transaction fails (parity errors, etc).
* -ETIMEDOUT if the SPMI transaction times out.
*/
extern int spmi_command_sleep(struct spmi_controller *ctrl, u8 sid);
/**
* spmi_command_wakeup() - sends WAKEUP command to the specified slave
* @ctrl: SPMI controller.
* @sid: slave identifier.
*
* The Wakeup command causes the Slave to move from the SLEEP state to
* the ACTIVE state.
*
* Returns
* -EINVAL for invalid slave identifier.
* -EPERM if the SPMI transaction is denied due to permission issues.
* -EIO if the SPMI transaction fails (parity errors, etc).
* -ETIMEDOUT if the SPMI transaction times out.
*/
extern int spmi_command_wakeup(struct spmi_controller *ctrl, u8 sid);
/**
* spmi_command_shutdown() - sends SHUTDOWN command to the specified slave
* @ctrl: SPMI controller.
* @sid: slave identifier.
*
* The Shutdown command causes the Slave to enter the SHUTDOWN state.
*
* Returns
* -EINVAL for invalid slave identifier.
* -EPERM if the SPMI transaction is denied due to permission issues.
* -EIO if the SPMI transaction fails (parity errors, etc).
* -ETIMEDOUT if the SPMI transaction times out.
*/
extern int spmi_command_shutdown(struct spmi_controller *ctrl, u8 sid);
/**
* spmi_for_each_container_dev - iterate over the array of devnode resources.
* @res: spmi_resource pointer used as the array cursor
* @spmi_dev: spmi_device to iterate
*
* Only useable in spmi-dev-container configurations.
*/
#define spmi_for_each_container_dev(res, spmi_dev) \
for (res = ((spmi_dev)->dev_node ? &(spmi_dev)->dev_node[0] : NULL); \
(res - (spmi_dev)->dev_node) < (spmi_dev)->num_dev_node; res++)
extern struct resource *spmi_get_resource(struct spmi_device *dev,
struct spmi_resource *node,
unsigned int type, unsigned int res_num);
struct resource *spmi_get_resource_byname(struct spmi_device *dev,
struct spmi_resource *node,
unsigned int type,
const char *name);
extern int spmi_get_irq(struct spmi_device *dev, struct spmi_resource *node,
unsigned int res_num);
extern int spmi_get_irq_byname(struct spmi_device *dev,
struct spmi_resource *node, const char *name);
/**
* spmi_get_node_name - return device name for spmi node
* @dev: spmi device handle
*
* Get the primary node name of a spmi_device coresponding with
* with the 'label' binding.
*
* Returns NULL if no primary dev name has been assigned to this spmi_device.
*/
static inline const char *spmi_get_primary_dev_name(struct spmi_device *dev)
{
if (dev->res.label)
return dev->res.label;
return NULL;
}
struct spmi_resource *spmi_get_dev_container_byname(struct spmi_device *dev,
const char *label);
#endif