| /* |
| * Copyright (c) 2011, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #ifndef __ARCH_ARM_MACH_MSM_INCLUDE_MACH_RPM_REGULATOR_8960_H |
| #define __ARCH_ARM_MACH_MSM_INCLUDE_MACH_RPM_REGULATOR_8960_H |
| |
| /* Pin control input signals. */ |
| #define RPM_VREG_PIN_CTRL_PM8921_D1 0x01 |
| #define RPM_VREG_PIN_CTRL_PM8921_A0 0x02 |
| #define RPM_VREG_PIN_CTRL_PM8921_A1 0x04 |
| #define RPM_VREG_PIN_CTRL_PM8921_A2 0x08 |
| |
| /** |
| * enum rpm_vreg_pin_fn_8960 - RPM regulator pin function choices |
| * %RPM_VREG_PIN_FN_8960_DONT_CARE: do not care about pin control state of |
| * the regulator; allow another master |
| * processor to specify pin control |
| * %RPM_VREG_PIN_FN_8960_ENABLE: pin control switches between disable and |
| * enable |
| * %RPM_VREG_PIN_FN_8960_MODE: pin control switches between LPM and HPM |
| * %RPM_VREG_PIN_FN_8960_SLEEP_B: regulator is forced into LPM when |
| * sleep_b signal is asserted |
| * %RPM_VREG_PIN_FN_8960_NONE: do not use pin control for the regulator |
| * and do not allow another master to |
| * request pin control |
| * |
| * The pin function specified in platform data corresponds to the active state |
| * pin function value. Pin function will be NONE until a consumer requests |
| * pin control to be enabled. |
| */ |
| enum rpm_vreg_pin_fn_8960 { |
| RPM_VREG_PIN_FN_8960_DONT_CARE, |
| RPM_VREG_PIN_FN_8960_ENABLE, |
| RPM_VREG_PIN_FN_8960_MODE, |
| RPM_VREG_PIN_FN_8960_SLEEP_B, |
| RPM_VREG_PIN_FN_8960_NONE, |
| }; |
| |
| /** |
| * enum rpm_vreg_force_mode_8960 - RPM regulator force mode choices |
| * %RPM_VREG_FORCE_MODE_8960_PIN_CTRL: allow pin control usage |
| * %RPM_VREG_FORCE_MODE_8960_NONE: do not force any mode |
| * %RPM_VREG_FORCE_MODE_8960_LPM: force into low power mode |
| * %RPM_VREG_FORCE_MODE_8960_AUTO: allow regulator to automatically select |
| * its own mode based on realtime current |
| * draw (only available for SMPS |
| * regulators) |
| * %RPM_VREG_FORCE_MODE_8960_HPM: force into high power mode |
| * %RPM_VREG_FORCE_MODE_8960_BYPASS: set regulator to use bypass mode, i.e. |
| * to act as a switch and not regulate |
| * (only available for LDO regulators) |
| * |
| * Force mode is used to override aggregation with other masters and to set |
| * special operating modes. |
| */ |
| enum rpm_vreg_force_mode_8960 { |
| RPM_VREG_FORCE_MODE_8960_PIN_CTRL = 0, |
| RPM_VREG_FORCE_MODE_8960_NONE = 0, |
| RPM_VREG_FORCE_MODE_8960_LPM, |
| RPM_VREG_FORCE_MODE_8960_AUTO, /* SMPS only */ |
| RPM_VREG_FORCE_MODE_8960_HPM, |
| RPM_VREG_FORCE_MODE_8960_BYPASS, /* LDO only */ |
| }; |
| |
| /** |
| * enum rpm_vreg_power_mode_8960 - power mode for SMPS regulators |
| * %RPM_VREG_POWER_MODE_8960_HYSTERETIC: Use hysteretic mode for HPM and when |
| * usage goes high in AUTO |
| * %RPM_VREG_POWER_MODE_8960_PWM: Use PWM mode for HPM and when usage |
| * goes high in AUTO |
| */ |
| enum rpm_vreg_power_mode_8960 { |
| RPM_VREG_POWER_MODE_8960_HYSTERETIC, |
| RPM_VREG_POWER_MODE_8960_PWM, |
| }; |
| |
| /** |
| * enum rpm_vreg_id - RPM regulator ID numbers (both real and pin control) |
| */ |
| enum rpm_vreg_id_8960 { |
| RPM_VREG_ID_PM8921_L1, |
| RPM_VREG_ID_PM8921_L2, |
| RPM_VREG_ID_PM8921_L3, |
| RPM_VREG_ID_PM8921_L4, |
| RPM_VREG_ID_PM8921_L5, |
| RPM_VREG_ID_PM8921_L6, |
| RPM_VREG_ID_PM8921_L7, |
| RPM_VREG_ID_PM8921_L8, |
| RPM_VREG_ID_PM8921_L9, |
| RPM_VREG_ID_PM8921_L10, |
| RPM_VREG_ID_PM8921_L11, |
| RPM_VREG_ID_PM8921_L12, |
| RPM_VREG_ID_PM8921_L13, |
| RPM_VREG_ID_PM8921_L14, |
| RPM_VREG_ID_PM8921_L15, |
| RPM_VREG_ID_PM8921_L16, |
| RPM_VREG_ID_PM8921_L17, |
| RPM_VREG_ID_PM8921_L18, |
| RPM_VREG_ID_PM8921_L21, |
| RPM_VREG_ID_PM8921_L22, |
| RPM_VREG_ID_PM8921_L23, |
| RPM_VREG_ID_PM8921_L24, |
| RPM_VREG_ID_PM8921_L25, |
| RPM_VREG_ID_PM8921_L26, |
| RPM_VREG_ID_PM8921_L27, |
| RPM_VREG_ID_PM8921_L28, |
| RPM_VREG_ID_PM8921_L29, |
| RPM_VREG_ID_PM8921_S1, |
| RPM_VREG_ID_PM8921_S2, |
| RPM_VREG_ID_PM8921_S3, |
| RPM_VREG_ID_PM8921_S4, |
| RPM_VREG_ID_PM8921_S5, |
| RPM_VREG_ID_PM8921_S6, |
| RPM_VREG_ID_PM8921_S7, |
| RPM_VREG_ID_PM8921_S8, |
| RPM_VREG_ID_PM8921_LVS1, |
| RPM_VREG_ID_PM8921_LVS2, |
| RPM_VREG_ID_PM8921_LVS3, |
| RPM_VREG_ID_PM8921_LVS4, |
| RPM_VREG_ID_PM8921_LVS5, |
| RPM_VREG_ID_PM8921_LVS6, |
| RPM_VREG_ID_PM8921_LVS7, |
| RPM_VREG_ID_PM8921_USB_OTG, |
| RPM_VREG_ID_PM8921_HDMI_MVS, |
| RPM_VREG_ID_PM8921_NCP, |
| RPM_VREG_ID_PM8921_MAX_REAL = RPM_VREG_ID_PM8921_NCP, |
| |
| /* The following are IDs for regulator devices to enable pin control. */ |
| RPM_VREG_ID_PM8921_L1_PC, |
| RPM_VREG_ID_PM8921_L2_PC, |
| RPM_VREG_ID_PM8921_L3_PC, |
| RPM_VREG_ID_PM8921_L4_PC, |
| RPM_VREG_ID_PM8921_L5_PC, |
| RPM_VREG_ID_PM8921_L6_PC, |
| RPM_VREG_ID_PM8921_L7_PC, |
| RPM_VREG_ID_PM8921_L8_PC, |
| RPM_VREG_ID_PM8921_L9_PC, |
| RPM_VREG_ID_PM8921_L10_PC, |
| RPM_VREG_ID_PM8921_L11_PC, |
| RPM_VREG_ID_PM8921_L12_PC, |
| RPM_VREG_ID_PM8921_L14_PC, |
| RPM_VREG_ID_PM8921_L15_PC, |
| RPM_VREG_ID_PM8921_L16_PC, |
| RPM_VREG_ID_PM8921_L17_PC, |
| RPM_VREG_ID_PM8921_L18_PC, |
| RPM_VREG_ID_PM8921_L21_PC, |
| RPM_VREG_ID_PM8921_L22_PC, |
| RPM_VREG_ID_PM8921_L23_PC, |
| |
| RPM_VREG_ID_PM8921_L29_PC, |
| RPM_VREG_ID_PM8921_S1_PC, |
| RPM_VREG_ID_PM8921_S2_PC, |
| RPM_VREG_ID_PM8921_S3_PC, |
| RPM_VREG_ID_PM8921_S4_PC, |
| |
| RPM_VREG_ID_PM8921_S7_PC, |
| RPM_VREG_ID_PM8921_S8_PC, |
| RPM_VREG_ID_PM8921_LVS1_PC, |
| |
| RPM_VREG_ID_PM8921_LVS3_PC, |
| RPM_VREG_ID_PM8921_LVS4_PC, |
| RPM_VREG_ID_PM8921_LVS5_PC, |
| RPM_VREG_ID_PM8921_LVS6_PC, |
| RPM_VREG_ID_PM8921_LVS7_PC, |
| |
| RPM_VREG_ID_PM8921_MAX = RPM_VREG_ID_PM8921_LVS7_PC, |
| }; |
| |
| /* Minimum high power mode loads in uA. */ |
| #define RPM_VREG_8960_LDO_5_HPM_MIN_LOAD 0 |
| #define RPM_VREG_8960_LDO_50_HPM_MIN_LOAD 5000 |
| #define RPM_VREG_8960_LDO_150_HPM_MIN_LOAD 10000 |
| #define RPM_VREG_8960_LDO_300_HPM_MIN_LOAD 10000 |
| #define RPM_VREG_8960_LDO_600_HPM_MIN_LOAD 10000 |
| #define RPM_VREG_8960_LDO_1200_HPM_MIN_LOAD 10000 |
| #define RPM_VREG_8960_SMPS_1500_HPM_MIN_LOAD 100000 |
| #define RPM_VREG_8960_SMPS_2000_HPM_MIN_LOAD 100000 |
| |
| #endif |