scripts/Makefile.lib - kernel/msm - Gitiles

 # Backward compatibility
 asflags-y  += $(EXTRA_AFLAGS)
 ccflags-y  += $(EXTRA_CFLAGS)
 cppflags-y += $(EXTRA_CPPFLAGS)
 ldflags-y  += $(EXTRA_LDFLAGS)

 #
 # flags that take effect in sub directories
 export KBUILD_SUBDIR_ASFLAGS := $(KBUILD_SUBDIR_ASFLAGS) $(subdir-asflags-y)
 export KBUILD_SUBDIR_CCFLAGS := $(KBUILD_SUBDIR_CCFLAGS) $(subdir-ccflags-y)

 # Figure out what we need to build from the various variables
 # ===========================================================================

 # When an object is listed to be built compiled-in and modular,
 # only build the compiled-in version

 obj-m := $(filter-out $(obj-y),$(obj-m))

 # Libraries are always collected in one lib file.
 # Filter out objects already built-in

 lib-y := $(filter-out $(obj-y), $(sort $(lib-y) $(lib-m)))


 # Handle objects in subdirs
 # ---------------------------------------------------------------------------
 # o if we encounter foo/ in $(obj-y), replace it by foo/built-in.o
 #   and add the directory to the list of dirs to descend into: $(subdir-y)
 # o if we encounter foo/ in $(obj-m), remove it from $(obj-m)
 #   and add the directory to the list of dirs to descend into: $(subdir-m)

 # Determine modorder.
 # Unfortunately, we don't have information about ordering between -y
 # and -m subdirs.  Just put -y's first.
 modorder	:= $(patsubst %/,%/modules.order, $(filter %/, $(obj-y)) $(obj-m:.o=.ko))

 __subdir-y	:= $(patsubst %/,%,$(filter %/, $(obj-y)))
 subdir-y	+= $(__subdir-y)
 __subdir-m	:= $(patsubst %/,%,$(filter %/, $(obj-m)))
 subdir-m	+= $(__subdir-m)
 obj-y		:= $(patsubst %/, %/built-in.o, $(obj-y))
 obj-m		:= $(filter-out %/, $(obj-m))

 # Subdirectories we need to descend into

 subdir-ym	:= $(sort $(subdir-y) $(subdir-m))

 # if $(foo-objs) exists, foo.o is a composite object
 multi-used-y := $(sort $(foreach m,$(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
 multi-used-m := $(sort $(foreach m,$(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
 multi-used   := $(multi-used-y) $(multi-used-m)
 single-used-m := $(sort $(filter-out $(multi-used-m),$(obj-m)))

 # Build list of the parts of our composite objects, our composite
 # objects depend on those (obviously)
 multi-objs-y := $(foreach m, $(multi-used-y), $($(m:.o=-objs)) $($(m:.o=-y)))
 multi-objs-m := $(foreach m, $(multi-used-m), $($(m:.o=-objs)) $($(m:.o=-y)))
 multi-objs   := $(multi-objs-y) $(multi-objs-m)

 # $(subdir-obj-y) is the list of objects in $(obj-y) which uses dir/ to
 # tell kbuild to descend
 subdir-obj-y := $(filter %/built-in.o, $(obj-y))

 # $(obj-dirs) is a list of directories that contain object files
 obj-dirs := $(dir $(multi-objs) $(subdir-obj-y))

 # Replace multi-part objects by their individual parts, look at local dir only
 real-objs-y := $(foreach m, $(filter-out $(subdir-obj-y), $(obj-y)), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m))) $(extra-y)
 real-objs-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m)))

 # Add subdir path

 extra-y		:= $(addprefix $(obj)/,$(extra-y))
 always		:= $(addprefix $(obj)/,$(always))
 targets		:= $(addprefix $(obj)/,$(targets))
 modorder	:= $(addprefix $(obj)/,$(modorder))
 obj-y		:= $(addprefix $(obj)/,$(obj-y))
 obj-m		:= $(addprefix $(obj)/,$(obj-m))
 lib-y		:= $(addprefix $(obj)/,$(lib-y))
 subdir-obj-y	:= $(addprefix $(obj)/,$(subdir-obj-y))
 real-objs-y	:= $(addprefix $(obj)/,$(real-objs-y))
 real-objs-m	:= $(addprefix $(obj)/,$(real-objs-m))
 single-used-m	:= $(addprefix $(obj)/,$(single-used-m))
 multi-used-y	:= $(addprefix $(obj)/,$(multi-used-y))
 multi-used-m	:= $(addprefix $(obj)/,$(multi-used-m))
 multi-objs-y	:= $(addprefix $(obj)/,$(multi-objs-y))
 multi-objs-m	:= $(addprefix $(obj)/,$(multi-objs-m))
 subdir-ym	:= $(addprefix $(obj)/,$(subdir-ym))
 obj-dirs	:= $(addprefix $(obj)/,$(obj-dirs))

 # These flags are needed for modversions and compiling, so we define them here
 # already
 # $(modname_flags) #defines KBUILD_MODNAME as the name of the module it will
 # end up in (or would, if it gets compiled in)
 # Note: It's possible that one object gets potentially linked into more
 #       than one module. In that case KBUILD_MODNAME will be set to foo_bar,
 #       where foo and bar are the name of the modules.
 name-fix = $(subst $(comma),_,$(subst -,_,$1))
 basename_flags = -D"KBUILD_BASENAME=KBUILD_STR($(call name-fix,$(basetarget)))"
 modname_flags  = $(if $(filter 1,$(words $(modname))),\
                  -D"KBUILD_MODNAME=KBUILD_STR($(call name-fix,$(modname)))")

 #hash values
 ifdef CONFIG_DYNAMIC_DEBUG
 debug_flags = -D"DEBUG_HASH=$(shell ./scripts/basic/hash djb2 $(@D)$(modname))"\
               -D"DEBUG_HASH2=$(shell ./scripts/basic/hash r5 $(@D)$(modname))"
 else
 debug_flags =
 endif

 orig_c_flags   = $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(KBUILD_SUBDIR_CCFLAGS) \
                  $(ccflags-y) $(CFLAGS_$(basetarget).o)
 _c_flags       = $(filter-out $(CFLAGS_REMOVE_$(basetarget).o), $(orig_c_flags))
 _a_flags       = $(KBUILD_CPPFLAGS) $(KBUILD_AFLAGS) $(KBUILD_SUBDIR_ASFLAGS) \
                  $(asflags-y) $(AFLAGS_$(basetarget).o)
 _cpp_flags     = $(KBUILD_CPPFLAGS) $(cppflags-y) $(CPPFLAGS_$(@F))

 #
 # Enable gcov profiling flags for a file, directory or for all files depending
 # on variables GCOV_PROFILE_obj.o, GCOV_PROFILE and CONFIG_GCOV_PROFILE_ALL
 # (in this order)
 #
 ifeq ($(CONFIG_GCOV_KERNEL),y)
 _c_flags += $(if $(patsubst n%,, \
 		$(GCOV_PROFILE_$(basetarget).o)$(GCOV_PROFILE)$(CONFIG_GCOV_PROFILE_ALL)), \
 		$(CFLAGS_GCOV))
 endif

 ifdef CONFIG_SYMBOL_PREFIX
 _cpp_flags += -DSYMBOL_PREFIX=$(patsubst "%",%,$(CONFIG_SYMBOL_PREFIX))
 endif


 # If building the kernel in a separate objtree expand all occurrences
 # of -Idir to -I$(srctree)/dir except for absolute paths (starting with '/').

 ifeq ($(KBUILD_SRC),)
 __c_flags	= $(_c_flags)
 __a_flags	= $(_a_flags)
 __cpp_flags     = $(_cpp_flags)
 else

 # -I$(obj) locates generated .h files
 # $(call addtree,-I$(obj)) locates .h files in srctree, from generated .c files
 #   and locates generated .h files
 # FIXME: Replace both with specific CFLAGS* statements in the makefiles
 __c_flags	= $(call addtree,-I$(obj)) $(call flags,_c_flags)
 __a_flags	=                          $(call flags,_a_flags)
 __cpp_flags     =                          $(call flags,_cpp_flags)
 endif

 c_flags        = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE)     \
 		 $(__c_flags) $(modkern_cflags)                           \
 		 -D"KBUILD_STR(s)=\#s" $(basename_flags) $(modname_flags) \
 		  $(debug_flags)

 a_flags        = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE)     \
 		 $(__a_flags) $(modkern_aflags)

 cpp_flags      = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE)     \
 		 $(__cpp_flags)

 ld_flags       = $(LDFLAGS) $(ldflags-y)

 # Finds the multi-part object the current object will be linked into
 modname-multi = $(sort $(foreach m,$(multi-used),\
 		$(if $(filter $(subst $(obj)/,,$*.o), $($(m:.o=-objs)) $($(m:.o=-y))),$(m:.o=))))

 # Shipped files
 # ===========================================================================

 quiet_cmd_shipped = SHIPPED $@
 cmd_shipped = cat $< > $@

 $(obj)/%:: $(src)/%_shipped
 	$(call cmd,shipped)

 # Commands useful for building a boot image
 # ===========================================================================
 #
 #	Use as following:
 #
 #	target: source(s) FORCE
 #		$(if_changed,ld/objcopy/gzip)
 #
 #	and add target to extra-y so that we know we have to
 #	read in the saved command line

 # Linking
 # ---------------------------------------------------------------------------

 quiet_cmd_ld = LD      $@
 cmd_ld = $(LD) $(LDFLAGS) $(ldflags-y) $(LDFLAGS_$(@F)) \
 	       $(filter-out FORCE,$^) -o $@

 # Objcopy
 # ---------------------------------------------------------------------------

 quiet_cmd_objcopy = OBJCOPY $@
 cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@

 # Gzip
 # ---------------------------------------------------------------------------

 quiet_cmd_gzip = GZIP    $@
 cmd_gzip = (cat $(filter-out FORCE,$^) | gzip -f -9 > $@) || \
 	(rm -f $@ ; false)


 # Bzip2
 # ---------------------------------------------------------------------------

 # Bzip2 and LZMA do not include size in file... so we have to fake that;
 # append the size as a 32-bit littleendian number as gzip does.
 size_append = printf $(shell						\
 dec_size=0;								\
 for F in $1; do								\
 	fsize=$$(stat -c "%s" $$F);					\
 	dec_size=$$(expr $$dec_size + $$fsize);				\
 done;									\
 printf "%08x" $$dec_size |						\
 	sed 's/\(..\)\(..\)\(..\)\(..\)/\\\\x\4\\\\x\3\\\\x\2\\\\x\1/g'	\
 )

 quiet_cmd_bzip2 = BZIP2   $@
 cmd_bzip2 = (cat $(filter-out FORCE,$^) | \
 	bzip2 -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
 	(rm -f $@ ; false)

 # Lzma
 # ---------------------------------------------------------------------------

 quiet_cmd_lzma = LZMA    $@
 cmd_lzma = (cat $(filter-out FORCE,$^) | \
 	lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
 	(rm -f $@ ; false)

 quiet_cmd_lzo = LZO    $@
 cmd_lzo = (cat $(filter-out FORCE,$^) | \
 	lzop -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
 	(rm -f $@ ; false)
	# Backward compatibility
	asflags-y += $(EXTRA_AFLAGS)
	ccflags-y += $(EXTRA_CFLAGS)
	cppflags-y += $(EXTRA_CPPFLAGS)
	ldflags-y += $(EXTRA_LDFLAGS)

	#
	# flags that take effect in sub directories
	export KBUILD_SUBDIR_ASFLAGS := $(KBUILD_SUBDIR_ASFLAGS) $(subdir-asflags-y)
	export KBUILD_SUBDIR_CCFLAGS := $(KBUILD_SUBDIR_CCFLAGS) $(subdir-ccflags-y)

	# Figure out what we need to build from the various variables
	# ===========================================================================

	# When an object is listed to be built compiled-in and modular,
	# only build the compiled-in version

	obj-m := $(filter-out $(obj-y),$(obj-m))

	# Libraries are always collected in one lib file.
	# Filter out objects already built-in

	lib-y := $(filter-out $(obj-y), $(sort $(lib-y) $(lib-m)))


	# Handle objects in subdirs
	# ---------------------------------------------------------------------------
	# o if we encounter foo/ in $(obj-y), replace it by foo/built-in.o
	# and add the directory to the list of dirs to descend into: $(subdir-y)
	# o if we encounter foo/ in $(obj-m), remove it from $(obj-m)
	# and add the directory to the list of dirs to descend into: $(subdir-m)

	# Determine modorder.
	# Unfortunately, we don't have information about ordering between -y
	# and -m subdirs. Just put -y's first.
	modorder := $(patsubst %/,%/modules.order, $(filter %/, $(obj-y)) $(obj-m:.o=.ko))

	__subdir-y := $(patsubst %/,%,$(filter %/, $(obj-y)))
	subdir-y += $(__subdir-y)
	__subdir-m := $(patsubst %/,%,$(filter %/, $(obj-m)))
	subdir-m += $(__subdir-m)
	obj-y := $(patsubst %/, %/built-in.o, $(obj-y))
	obj-m := $(filter-out %/, $(obj-m))

	# Subdirectories we need to descend into

	subdir-ym := $(sort $(subdir-y) $(subdir-m))

	# if $(foo-objs) exists, foo.o is a composite object
	multi-used-y := $(sort $(foreach m,$(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
	multi-used-m := $(sort $(foreach m,$(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
	multi-used := $(multi-used-y) $(multi-used-m)
	single-used-m := $(sort $(filter-out $(multi-used-m),$(obj-m)))

	# Build list of the parts of our composite objects, our composite
	# objects depend on those (obviously)
	multi-objs-y := $(foreach m, $(multi-used-y), $($(m:.o=-objs)) $($(m:.o=-y)))
	multi-objs-m := $(foreach m, $(multi-used-m), $($(m:.o=-objs)) $($(m:.o=-y)))
	multi-objs := $(multi-objs-y) $(multi-objs-m)

	# $(subdir-obj-y) is the list of objects in $(obj-y) which uses dir/ to
	# tell kbuild to descend
	subdir-obj-y := $(filter %/built-in.o, $(obj-y))

	# $(obj-dirs) is a list of directories that contain object files
	obj-dirs := $(dir $(multi-objs) $(subdir-obj-y))

	# Replace multi-part objects by their individual parts, look at local dir only
	real-objs-y := $(foreach m, $(filter-out $(subdir-obj-y), $(obj-y)), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m))) $(extra-y)
	real-objs-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m)))

	# Add subdir path

	extra-y := $(addprefix $(obj)/,$(extra-y))
	always := $(addprefix $(obj)/,$(always))
	targets := $(addprefix $(obj)/,$(targets))
	modorder := $(addprefix $(obj)/,$(modorder))
	obj-y := $(addprefix $(obj)/,$(obj-y))
	obj-m := $(addprefix $(obj)/,$(obj-m))
	lib-y := $(addprefix $(obj)/,$(lib-y))
	subdir-obj-y := $(addprefix $(obj)/,$(subdir-obj-y))
	real-objs-y := $(addprefix $(obj)/,$(real-objs-y))
	real-objs-m := $(addprefix $(obj)/,$(real-objs-m))
	single-used-m := $(addprefix $(obj)/,$(single-used-m))
	multi-used-y := $(addprefix $(obj)/,$(multi-used-y))
	multi-used-m := $(addprefix $(obj)/,$(multi-used-m))
	multi-objs-y := $(addprefix $(obj)/,$(multi-objs-y))
	multi-objs-m := $(addprefix $(obj)/,$(multi-objs-m))
	subdir-ym := $(addprefix $(obj)/,$(subdir-ym))
	obj-dirs := $(addprefix $(obj)/,$(obj-dirs))

	# These flags are needed for modversions and compiling, so we define them here
	# already
	# $(modname_flags) #defines KBUILD_MODNAME as the name of the module it will
	# end up in (or would, if it gets compiled in)
	# Note: It's possible that one object gets potentially linked into more
	# than one module. In that case KBUILD_MODNAME will be set to foo_bar,
	# where foo and bar are the name of the modules.
	name-fix = $(subst $(comma),_,$(subst -,_,$1))
	basename_flags = -D"KBUILD_BASENAME=KBUILD_STR($(call name-fix,$(basetarget)))"
	modname_flags = $(if $(filter 1,$(words $(modname))),\
	-D"KBUILD_MODNAME=KBUILD_STR($(call name-fix,$(modname)))")

	#hash values
	ifdef CONFIG_DYNAMIC_DEBUG
	debug_flags = -D"DEBUG_HASH=$(shell ./scripts/basic/hash djb2 $(@D)$(modname))"\
	-D"DEBUG_HASH2=$(shell ./scripts/basic/hash r5 $(@D)$(modname))"
	else
	debug_flags =
	endif

	orig_c_flags = $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(KBUILD_SUBDIR_CCFLAGS) \
	$(ccflags-y) $(CFLAGS_$(basetarget).o)
	_c_flags = $(filter-out $(CFLAGS_REMOVE_$(basetarget).o), $(orig_c_flags))
	_a_flags = $(KBUILD_CPPFLAGS) $(KBUILD_AFLAGS) $(KBUILD_SUBDIR_ASFLAGS) \
	$(asflags-y) $(AFLAGS_$(basetarget).o)
	_cpp_flags = $(KBUILD_CPPFLAGS) $(cppflags-y) $(CPPFLAGS_$(@F))

	#
	# Enable gcov profiling flags for a file, directory or for all files depending
	# on variables GCOV_PROFILE_obj.o, GCOV_PROFILE and CONFIG_GCOV_PROFILE_ALL
	# (in this order)
	#
	ifeq ($(CONFIG_GCOV_KERNEL),y)
	_c_flags += $(if $(patsubst n%,, \
	$(GCOV_PROFILE_$(basetarget).o)$(GCOV_PROFILE)$(CONFIG_GCOV_PROFILE_ALL)), \
	$(CFLAGS_GCOV))
	endif

	ifdef CONFIG_SYMBOL_PREFIX
	_cpp_flags += -DSYMBOL_PREFIX=$(patsubst "%",%,$(CONFIG_SYMBOL_PREFIX))
	endif


	# If building the kernel in a separate objtree expand all occurrences
	# of -Idir to -I$(srctree)/dir except for absolute paths (starting with '/').

	ifeq ($(KBUILD_SRC),)
	__c_flags = $(_c_flags)
	__a_flags = $(_a_flags)
	__cpp_flags = $(_cpp_flags)
	else

	# -I$(obj) locates generated .h files
	# $(call addtree,-I$(obj)) locates .h files in srctree, from generated .c files
	# and locates generated .h files
	# FIXME: Replace both with specific CFLAGS* statements in the makefiles
	__c_flags = $(call addtree,-I$(obj)) $(call flags,_c_flags)
	__a_flags = $(call flags,_a_flags)
	__cpp_flags = $(call flags,_cpp_flags)
	endif

	c_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \
	$(__c_flags) $(modkern_cflags) \
	-D"KBUILD_STR(s)=\#s" $(basename_flags) $(modname_flags) \
	$(debug_flags)

	a_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \
	$(__a_flags) $(modkern_aflags)

	cpp_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \
	$(__cpp_flags)

	ld_flags = $(LDFLAGS) $(ldflags-y)

	# Finds the multi-part object the current object will be linked into
	modname-multi = $(sort $(foreach m,$(multi-used),\
	$(if $(filter $(subst $(obj)/,,$*.o), $($(m:.o=-objs)) $($(m:.o=-y))),$(m:.o=))))

	# Shipped files
	# ===========================================================================

	quiet_cmd_shipped = SHIPPED $@
	cmd_shipped = cat $< > $@

	$(obj)/%:: $(src)/%_shipped
	$(call cmd,shipped)

	# Commands useful for building a boot image
	# ===========================================================================
	#
	# Use as following:
	#
	# target: source(s) FORCE
	# $(if_changed,ld/objcopy/gzip)
	#
	# and add target to extra-y so that we know we have to
	# read in the saved command line

	# Linking
	# ---------------------------------------------------------------------------

	quiet_cmd_ld = LD $@
	cmd_ld = $(LD) $(LDFLAGS) $(ldflags-y) $(LDFLAGS_$(@F)) \
	$(filter-out FORCE,$^) -o $@

	# Objcopy
	# ---------------------------------------------------------------------------

	quiet_cmd_objcopy = OBJCOPY $@
	cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@

	# Gzip
	# ---------------------------------------------------------------------------

	quiet_cmd_gzip = GZIP $@
	cmd_gzip = (cat $(filter-out FORCE,$^) \| gzip -f -9 > $@) \|\| \
	(rm -f $@ ; false)


	# Bzip2
	# ---------------------------------------------------------------------------

	# Bzip2 and LZMA do not include size in file... so we have to fake that;
	# append the size as a 32-bit littleendian number as gzip does.
	size_append = printf $(shell \
	dec_size=0; \
	for F in $1; do \
	fsize=$$(stat -c "%s" $$F); \
	dec_size=$$(expr $$dec_size + $$fsize); \
	done; \
	printf "%08x" $$dec_size \| \
	sed 's/\(..\)\(..\)\(..\)\(..\)/\\\\x\4\\\\x\3\\\\x\2\\\\x\1/g' \
	)

	quiet_cmd_bzip2 = BZIP2 $@
	cmd_bzip2 = (cat $(filter-out FORCE,$^) \| \
	bzip2 -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ \|\| \
	(rm -f $@ ; false)

	# Lzma
	# ---------------------------------------------------------------------------

	quiet_cmd_lzma = LZMA $@
	cmd_lzma = (cat $(filter-out FORCE,$^) \| \
	lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ \|\| \
	(rm -f $@ ; false)

	quiet_cmd_lzo = LZO $@
	cmd_lzo = (cat $(filter-out FORCE,$^) \| \
	lzop -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ \|\| \
	(rm -f $@ ; false)