blob: 954e5ccd2069c7b0809e329588d77628ab632e08 [file] [log] [blame]
/* Copyright (c) 2012, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/bitops.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/spinlock.h>
#include <asm/hardware/gic.h>
#include <mach/msm_smsm.h>
#include "mpm-8625.h"
#define NUM_REGS_ENABLE 2
/* (NR_MSM_IRQS/32) 96 max irqs supported */
#define NUM_REGS_DISABLE 3
#define GIC_IRQ_MASK(irq) BIT(irq % 32)
#define GIC_IRQ_INDEX(irq) (irq / 32)
enum {
IRQ_DEBUG_SLEEP_INT_TRIGGER = BIT(0),
IRQ_DEBUG_SLEEP_INT = BIT(1),
IRQ_DEBUG_SLEEP_ABORT = BIT(2),
IRQ_DEBUG_SLEEP = BIT(3),
IRQ_DEBUG_SLEEP_REQUEST = BIT(4)
};
static int msm_gic_irq_debug_mask;
module_param_named(debug_mask, msm_gic_irq_debug_mask, int,
S_IRUGO | S_IWUSR | S_IWGRP);
static uint32_t msm_gic_irq_smsm_wake_enable[NUM_REGS_ENABLE];
static uint32_t msm_gic_irq_idle_disable[NUM_REGS_DISABLE];
/*
* Some of the interrupts which will not be considered as wake capable
* should be marked as FAKE.
* Interrupts: GPIO, Timers etc..
*/
#define SMSM_FAKE_IRQ (0xff)
/* msm_gic_irq_to_smsm: IRQ's those will be monitored by Modem */
static uint8_t msm_gic_irq_to_smsm[NR_IRQS] = {
[MSM8625_INT_USB_OTG] = 4,
[MSM8625_INT_PWB_I2C] = 5,
[MSM8625_INT_SDC1_0] = 6,
[MSM8625_INT_SDC1_1] = 7,
[MSM8625_INT_SDC2_0] = 8,
[MSM8625_INT_SDC2_1] = 9,
[MSM8625_INT_ADSP_A9_A11] = 10,
[MSM8625_INT_UART1] = 11,
[MSM8625_INT_UART2] = 12,
[MSM8625_INT_UART3] = 13,
[MSM8625_INT_UART1_RX] = 14,
[MSM8625_INT_UART2_RX] = 15,
[MSM8625_INT_UART3_RX] = 16,
[MSM8625_INT_UART1DM_IRQ] = 17,
[MSM8625_INT_UART1DM_RX] = 18,
[MSM8625_INT_KEYSENSE] = 19,
[MSM8625_INT_AD_HSSD] = 20,
[MSM8625_INT_NAND_WR_ER_DONE] = 21,
[MSM8625_INT_NAND_OP_DONE] = 22,
[MSM8625_INT_TCHSCRN1] = 23,
[MSM8625_INT_TCHSCRN2] = 24,
[MSM8625_INT_TCHSCRN_SSBI] = 25,
[MSM8625_INT_USB_HS] = 26,
[MSM8625_INT_UART2DM_RX] = 27,
[MSM8625_INT_UART2DM_IRQ] = 28,
[MSM8625_INT_SDC4_1] = 29,
[MSM8625_INT_SDC4_0] = 30,
[MSM8625_INT_SDC3_1] = 31,
[MSM8625_INT_SDC3_0] = 32,
/* fake wakeup interrupts */
[MSM8625_INT_GPIO_GROUP1] = SMSM_FAKE_IRQ,
[MSM8625_INT_GPIO_GROUP2] = SMSM_FAKE_IRQ,
[MSM8625_INT_A9_M2A_0] = SMSM_FAKE_IRQ,
[MSM8625_INT_A9_M2A_1] = SMSM_FAKE_IRQ,
[MSM8625_INT_A9_M2A_5] = SMSM_FAKE_IRQ,
[MSM8625_INT_GP_TIMER_EXP] = SMSM_FAKE_IRQ,
[MSM8625_INT_DEBUG_TIMER_EXP] = SMSM_FAKE_IRQ,
[MSM8625_INT_ADSP_A11] = SMSM_FAKE_IRQ,
};
static void msm_gic_mask_irq(struct irq_data *d)
{
unsigned int index = GIC_IRQ_INDEX(d->irq);
uint32_t mask;
int smsm_irq = msm_gic_irq_to_smsm[d->irq];
mask = GIC_IRQ_MASK(d->irq);
if (smsm_irq == 0) {
msm_gic_irq_idle_disable[index] &= ~mask;
} else {
mask = GIC_IRQ_MASK(smsm_irq - 1);
msm_gic_irq_smsm_wake_enable[0] &= ~mask;
}
}
static void msm_gic_unmask_irq(struct irq_data *d)
{
unsigned int index = GIC_IRQ_INDEX(d->irq);
uint32_t mask;
int smsm_irq = msm_gic_irq_to_smsm[d->irq];
mask = GIC_IRQ_MASK(d->irq);
if (smsm_irq == 0) {
msm_gic_irq_idle_disable[index] |= mask;
} else {
mask = GIC_IRQ_MASK(smsm_irq - 1);
msm_gic_irq_smsm_wake_enable[0] |= mask;
}
}
static int msm_gic_set_irq_wake(struct irq_data *d, unsigned int on)
{
uint32_t mask;
int smsm_irq = msm_gic_irq_to_smsm[d->irq];
if (smsm_irq == 0) {
pr_err("bad wake up irq %d\n", d->irq);
return -EINVAL;
}
if (smsm_irq == SMSM_FAKE_IRQ)
return 0;
mask = GIC_IRQ_MASK(smsm_irq - 1);
if (on)
msm_gic_irq_smsm_wake_enable[1] |= mask;
else
msm_gic_irq_smsm_wake_enable[1] &= ~mask;
return 0;
}
void __init msm_gic_irq_extn_init(void)
{
gic_arch_extn.irq_mask = msm_gic_mask_irq;
gic_arch_extn.irq_unmask = msm_gic_unmask_irq;
gic_arch_extn.irq_disable = msm_gic_mask_irq;
gic_arch_extn.irq_set_wake = msm_gic_set_irq_wake;
}
/* Power APIs */
/*
* Iterate over the disable list
*/
int msm_gic_irq_idle_sleep_allowed(void)
{
uint32_t i, disable = 0;
for (i = 0; i < NUM_REGS_DISABLE; i++)
disable |= msm_gic_irq_idle_disable[i];
return !disable;
}
/*
* Prepare interrupt subsystem for entering sleep -- phase 1
* If modem_wake is true, return currently enabled interrupt
* mask in *irq_mask
*/
void msm_gic_irq_enter_sleep1(bool modem_wake, int from_idle, uint32_t
*irq_mask)
{
if (modem_wake) {
*irq_mask = msm_gic_irq_smsm_wake_enable[!from_idle];
if (msm_gic_irq_debug_mask & IRQ_DEBUG_SLEEP)
pr_info("%s irq_mask %x\n", __func__, *irq_mask);
}
}
/*
* Prepare interrupt susbsytem for entering sleep -- phase 2
* Detect any pending interrupts and configure interrupt hardware.
* Return value:
* -EAGAIN: there are pending interrupt(s); interrupt configuration is not
* changed
* 0: Success
*/
int msm_gic_irq_enter_sleep2(bool modem_wake, int from_idle)
{
if (from_idle && !modem_wake)
return 0;
/* edge triggered interrupt may get lost if this mode is used */
WARN_ON_ONCE(!modem_wake && !from_idle);
if (msm_gic_irq_debug_mask & IRQ_DEBUG_SLEEP)
pr_info("%s interrupts pending\n", __func__);
/* check the pending interrupts */
if (msm_gic_spi_ppi_pending()) {
if (msm_gic_irq_debug_mask & IRQ_DEBUG_SLEEP_ABORT)
pr_info("%s aborted....\n", __func__);
return -EAGAIN;
}
if (modem_wake) {
/* save the contents of GIC CPU interface and Distributor
* Disable all the Interrupts, if we enter from idle pc
*/
msm_gic_save(modem_wake, from_idle);
irq_set_irq_type(MSM8625_INT_A9_M2A_6, IRQF_TRIGGER_RISING);
enable_irq(MSM8625_INT_A9_M2A_6);
pr_debug("%s going for sleep now\n", __func__);
}
return 0;
}
/*
* Restore interrupt subsystem from sleep -- phase 1
* Configure the interrupt hardware.
*/
void msm_gic_irq_exit_sleep1(uint32_t irq_mask, uint32_t wakeup_reason,
uint32_t pending_irqs)
{
/* Restore GIC contents, which were saved */
msm_gic_restore();
/* Disable A9_M2A_6 */
disable_irq(MSM8625_INT_A9_M2A_6);
if (msm_gic_irq_debug_mask & IRQ_DEBUG_SLEEP)
pr_info("%s %x %x %x now\n", __func__, irq_mask,
pending_irqs, wakeup_reason);
}
/*
* Restore interrupt subsystem from sleep -- phase 2
* Poke the specified pending interrupts into interrupt hardware.
*/
void msm_gic_irq_exit_sleep2(uint32_t irq_mask, uint32_t wakeup_reason,
uint32_t pending)
{
int i, smsm_irq, smsm_mask;
struct irq_desc *desc;
if (msm_gic_irq_debug_mask & IRQ_DEBUG_SLEEP)
pr_info("%s %x %x %x now\n", __func__, irq_mask,
pending, wakeup_reason);
for (i = 0; pending && i < ARRAY_SIZE(msm_gic_irq_to_smsm); i++) {
smsm_irq = msm_gic_irq_to_smsm[i];
if (smsm_irq == 0)
continue;
smsm_mask = BIT(smsm_irq - 1);
if (!(pending & smsm_mask))
continue;
pending &= ~smsm_mask;
if (msm_gic_irq_debug_mask & IRQ_DEBUG_SLEEP_INT)
pr_info("%s, irq %d, still pending %x now\n",
__func__, i, pending);
/* Peding IRQ */
desc = i ? irq_to_desc(i) : NULL;
/* Check if the pending */
if (desc && !irqd_is_level_type(&desc->irq_data)) {
/* Mark the IRQ as pending, if not Level */
irq_set_pending(i);
check_irq_resend(desc, i);
}
}
}
/*
* Restore interrupt subsystem from sleep -- phase 3
* Print debug information
*/
void msm_gic_irq_exit_sleep3(uint32_t irq_mask, uint32_t wakeup_reason,
uint32_t pending_irqs)
{
if (msm_gic_irq_debug_mask & IRQ_DEBUG_SLEEP)
pr_info("%s, irq_mask %x pending_irqs %x, wakeup_reason %x,"
"state %x now\n", __func__, irq_mask,
pending_irqs, wakeup_reason,
smsm_get_state(SMSM_MODEM_STATE));
}