| /* |
| * Copyright (c) 2012, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #ifndef __ARCH_ARM_MACH_MSM_INCLUDE_MACH_RPM_REGULATOR_8930_H |
| #define __ARCH_ARM_MACH_MSM_INCLUDE_MACH_RPM_REGULATOR_8930_H |
| |
| /* Pin control input signals. */ |
| #define RPM_VREG_PIN_CTRL_PM8038_D1 0x01 |
| #define RPM_VREG_PIN_CTRL_PM8038_A0 0x02 |
| #define RPM_VREG_PIN_CTRL_PM8038_A1 0x04 |
| #define RPM_VREG_PIN_CTRL_PM8038_A2 0x08 |
| |
| /** |
| * enum rpm_vreg_pin_fn_8930 - RPM regulator pin function choices |
| * %RPM_VREG_PIN_FN_8930_DONT_CARE: do not care about pin control state of |
| * the regulator; allow another master |
| * processor to specify pin control |
| * %RPM_VREG_PIN_FN_8930_ENABLE: pin control switches between disable and |
| * enable |
| * %RPM_VREG_PIN_FN_8930_MODE: pin control switches between LPM and HPM |
| * %RPM_VREG_PIN_FN_8930_SLEEP_B: regulator is forced into LPM when |
| * sleep_b signal is asserted |
| * %RPM_VREG_PIN_FN_8930_NONE: do not use pin control for the regulator |
| * and do not allow another master to |
| * request pin control |
| * |
| * The pin function specified in platform data corresponds to the active state |
| * pin function value. Pin function will be NONE until a consumer requests |
| * pin control to be enabled. |
| */ |
| enum rpm_vreg_pin_fn_8930 { |
| RPM_VREG_PIN_FN_8930_DONT_CARE, |
| RPM_VREG_PIN_FN_8930_ENABLE, |
| RPM_VREG_PIN_FN_8930_MODE, |
| RPM_VREG_PIN_FN_8930_SLEEP_B, |
| RPM_VREG_PIN_FN_8930_NONE, |
| }; |
| |
| /** |
| * enum rpm_vreg_force_mode_8930 - RPM regulator force mode choices |
| * %RPM_VREG_FORCE_MODE_8930_PIN_CTRL: allow pin control usage |
| * %RPM_VREG_FORCE_MODE_8930_NONE: do not force any mode |
| * %RPM_VREG_FORCE_MODE_8930_LPM: force into low power mode |
| * %RPM_VREG_FORCE_MODE_8930_AUTO: allow regulator to automatically select |
| * its own mode based on realtime current |
| * draw (only available for SMPS |
| * regulators) |
| * %RPM_VREG_FORCE_MODE_8930_HPM: force into high power mode |
| * %RPM_VREG_FORCE_MODE_8930_BYPASS: set regulator to use bypass mode, i.e. |
| * to act as a switch and not regulate |
| * (only available for LDO regulators) |
| * |
| * Force mode is used to override aggregation with other masters and to set |
| * special operating modes. |
| */ |
| enum rpm_vreg_force_mode_8930 { |
| RPM_VREG_FORCE_MODE_8930_PIN_CTRL = 0, |
| RPM_VREG_FORCE_MODE_8930_NONE = 0, |
| RPM_VREG_FORCE_MODE_8930_LPM, |
| RPM_VREG_FORCE_MODE_8930_AUTO, /* SMPS only */ |
| RPM_VREG_FORCE_MODE_8930_HPM, |
| RPM_VREG_FORCE_MODE_8930_BYPASS, /* LDO only */ |
| }; |
| |
| /** |
| * enum rpm_vreg_power_mode_8930 - power mode for SMPS regulators |
| * %RPM_VREG_POWER_MODE_8930_HYSTERETIC: Use hysteretic mode for HPM and when |
| * usage goes high in AUTO |
| * %RPM_VREG_POWER_MODE_8930_PWM: Use PWM mode for HPM and when usage |
| * goes high in AUTO |
| */ |
| enum rpm_vreg_power_mode_8930 { |
| RPM_VREG_POWER_MODE_8930_HYSTERETIC, |
| RPM_VREG_POWER_MODE_8930_PWM, |
| }; |
| |
| /** |
| * enum rpm_vreg_id_8930_pm8038 - RPM regulator ID numbers (both real and |
| * pin control) used with MSM8930 + PM8038 |
| */ |
| enum rpm_vreg_id_8930_pm8038 { |
| RPM_VREG_ID_PM8038_L1, |
| RPM_VREG_ID_PM8038_L2, |
| RPM_VREG_ID_PM8038_L3, |
| RPM_VREG_ID_PM8038_L4, |
| RPM_VREG_ID_PM8038_L5, |
| RPM_VREG_ID_PM8038_L6, |
| RPM_VREG_ID_PM8038_L7, |
| RPM_VREG_ID_PM8038_L8, |
| RPM_VREG_ID_PM8038_L9, |
| RPM_VREG_ID_PM8038_L10, |
| RPM_VREG_ID_PM8038_L11, |
| RPM_VREG_ID_PM8038_L12, |
| RPM_VREG_ID_PM8038_L13, |
| RPM_VREG_ID_PM8038_L14, |
| RPM_VREG_ID_PM8038_L15, |
| RPM_VREG_ID_PM8038_L16, |
| RPM_VREG_ID_PM8038_L17, |
| RPM_VREG_ID_PM8038_L18, |
| RPM_VREG_ID_PM8038_L19, |
| RPM_VREG_ID_PM8038_L20, |
| RPM_VREG_ID_PM8038_L21, |
| RPM_VREG_ID_PM8038_L22, |
| RPM_VREG_ID_PM8038_L23, |
| RPM_VREG_ID_PM8038_L24, |
| RPM_VREG_ID_PM8038_L25, |
| RPM_VREG_ID_PM8038_L26, |
| RPM_VREG_ID_PM8038_L27, |
| RPM_VREG_ID_PM8038_S1, |
| RPM_VREG_ID_PM8038_S2, |
| RPM_VREG_ID_PM8038_S3, |
| RPM_VREG_ID_PM8038_S4, |
| RPM_VREG_ID_PM8038_S5, |
| RPM_VREG_ID_PM8038_S6, |
| RPM_VREG_ID_PM8038_LVS1, |
| RPM_VREG_ID_PM8038_LVS2, |
| RPM_VREG_ID_PM8038_VDD_DIG_CORNER, |
| RPM_VREG_ID_PM8038_MAX_REAL = RPM_VREG_ID_PM8038_VDD_DIG_CORNER, |
| |
| /* The following are IDs for regulator devices to enable pin control. */ |
| RPM_VREG_ID_PM8038_L2_PC, |
| RPM_VREG_ID_PM8038_L3_PC, |
| RPM_VREG_ID_PM8038_L4_PC, |
| RPM_VREG_ID_PM8038_L5_PC, |
| RPM_VREG_ID_PM8038_L6_PC, |
| RPM_VREG_ID_PM8038_L7_PC, |
| RPM_VREG_ID_PM8038_L8_PC, |
| RPM_VREG_ID_PM8038_L9_PC, |
| RPM_VREG_ID_PM8038_L10_PC, |
| RPM_VREG_ID_PM8038_L11_PC, |
| RPM_VREG_ID_PM8038_L12_PC, |
| RPM_VREG_ID_PM8038_L14_PC, |
| RPM_VREG_ID_PM8038_L15_PC, |
| RPM_VREG_ID_PM8038_L17_PC, |
| RPM_VREG_ID_PM8038_L18_PC, |
| RPM_VREG_ID_PM8038_L21_PC, |
| RPM_VREG_ID_PM8038_L22_PC, |
| RPM_VREG_ID_PM8038_L23_PC, |
| RPM_VREG_ID_PM8038_L26_PC, |
| RPM_VREG_ID_PM8038_S1_PC, |
| RPM_VREG_ID_PM8038_S2_PC, |
| RPM_VREG_ID_PM8038_S3_PC, |
| RPM_VREG_ID_PM8038_S4_PC, |
| RPM_VREG_ID_PM8038_LVS1_PC, |
| RPM_VREG_ID_PM8038_LVS2_PC, |
| RPM_VREG_ID_PM8038_MAX = RPM_VREG_ID_PM8038_LVS2_PC, |
| }; |
| |
| /** |
| * enum rpm_vreg_id_8930_pm8917 - RPM regulator ID numbers (both real and |
| * pin control) used with MSM8930 + PM8917 |
| */ |
| enum rpm_vreg_id_8930_pm8917 { |
| RPM_VREG_ID_PM8917_L1, |
| RPM_VREG_ID_PM8917_L2, |
| RPM_VREG_ID_PM8917_L3, |
| RPM_VREG_ID_PM8917_L4, |
| RPM_VREG_ID_PM8917_L5, |
| RPM_VREG_ID_PM8917_L6, |
| RPM_VREG_ID_PM8917_L7, |
| RPM_VREG_ID_PM8917_L8, |
| RPM_VREG_ID_PM8917_L9, |
| RPM_VREG_ID_PM8917_L10, |
| RPM_VREG_ID_PM8917_L11, |
| RPM_VREG_ID_PM8917_L12, |
| RPM_VREG_ID_PM8917_L14, |
| RPM_VREG_ID_PM8917_L15, |
| RPM_VREG_ID_PM8917_L16, |
| RPM_VREG_ID_PM8917_L17, |
| RPM_VREG_ID_PM8917_L18, |
| RPM_VREG_ID_PM8917_L21, |
| RPM_VREG_ID_PM8917_L22, |
| RPM_VREG_ID_PM8917_L23, |
| RPM_VREG_ID_PM8917_L24, |
| RPM_VREG_ID_PM8917_L25, |
| RPM_VREG_ID_PM8917_L26, |
| RPM_VREG_ID_PM8917_L27, |
| RPM_VREG_ID_PM8917_L28, |
| RPM_VREG_ID_PM8917_L29, |
| RPM_VREG_ID_PM8917_L30, |
| RPM_VREG_ID_PM8917_L31, |
| RPM_VREG_ID_PM8917_L32, |
| RPM_VREG_ID_PM8917_L33, |
| RPM_VREG_ID_PM8917_L34, |
| RPM_VREG_ID_PM8917_L35, |
| RPM_VREG_ID_PM8917_L36, |
| RPM_VREG_ID_PM8917_S1, |
| RPM_VREG_ID_PM8917_S2, |
| RPM_VREG_ID_PM8917_S3, |
| RPM_VREG_ID_PM8917_S4, |
| RPM_VREG_ID_PM8917_S5, |
| RPM_VREG_ID_PM8917_S6, |
| RPM_VREG_ID_PM8917_S7, |
| RPM_VREG_ID_PM8917_S8, |
| RPM_VREG_ID_PM8917_LVS1, |
| RPM_VREG_ID_PM8917_LVS3, |
| RPM_VREG_ID_PM8917_LVS4, |
| RPM_VREG_ID_PM8917_LVS5, |
| RPM_VREG_ID_PM8917_LVS6, |
| RPM_VREG_ID_PM8917_LVS7, |
| RPM_VREG_ID_PM8917_USB_OTG, |
| RPM_VREG_ID_PM8917_VDD_DIG_CORNER, |
| RPM_VREG_ID_PM8917_MAX_REAL = RPM_VREG_ID_PM8917_VDD_DIG_CORNER, |
| |
| /* The following are IDs for regulator devices to enable pin control. */ |
| RPM_VREG_ID_PM8917_L1_PC, |
| RPM_VREG_ID_PM8917_L2_PC, |
| RPM_VREG_ID_PM8917_L3_PC, |
| RPM_VREG_ID_PM8917_L4_PC, |
| RPM_VREG_ID_PM8917_L5_PC, |
| RPM_VREG_ID_PM8917_L6_PC, |
| RPM_VREG_ID_PM8917_L7_PC, |
| RPM_VREG_ID_PM8917_L8_PC, |
| RPM_VREG_ID_PM8917_L9_PC, |
| RPM_VREG_ID_PM8917_L10_PC, |
| RPM_VREG_ID_PM8917_L11_PC, |
| RPM_VREG_ID_PM8917_L12_PC, |
| RPM_VREG_ID_PM8917_L14_PC, |
| RPM_VREG_ID_PM8917_L15_PC, |
| RPM_VREG_ID_PM8917_L16_PC, |
| RPM_VREG_ID_PM8917_L17_PC, |
| RPM_VREG_ID_PM8917_L18_PC, |
| RPM_VREG_ID_PM8917_L21_PC, |
| RPM_VREG_ID_PM8917_L22_PC, |
| RPM_VREG_ID_PM8917_L23_PC, |
| |
| RPM_VREG_ID_PM8917_L29_PC, |
| RPM_VREG_ID_PM8917_L30_PC, |
| RPM_VREG_ID_PM8917_L31_PC, |
| RPM_VREG_ID_PM8917_L32_PC, |
| RPM_VREG_ID_PM8917_L33_PC, |
| RPM_VREG_ID_PM8917_L34_PC, |
| RPM_VREG_ID_PM8917_L35_PC, |
| RPM_VREG_ID_PM8917_L36_PC, |
| RPM_VREG_ID_PM8917_S1_PC, |
| RPM_VREG_ID_PM8917_S2_PC, |
| RPM_VREG_ID_PM8917_S3_PC, |
| RPM_VREG_ID_PM8917_S4_PC, |
| |
| RPM_VREG_ID_PM8917_S7_PC, |
| RPM_VREG_ID_PM8917_S8_PC, |
| RPM_VREG_ID_PM8917_LVS1_PC, |
| RPM_VREG_ID_PM8917_LVS3_PC, |
| RPM_VREG_ID_PM8917_LVS4_PC, |
| RPM_VREG_ID_PM8917_LVS5_PC, |
| RPM_VREG_ID_PM8917_LVS6_PC, |
| RPM_VREG_ID_PM8917_LVS7_PC, |
| |
| RPM_VREG_ID_PM8917_MAX = RPM_VREG_ID_PM8917_LVS7_PC, |
| }; |
| |
| /* Minimum high power mode loads in uA. */ |
| #define RPM_VREG_8930_LDO_5_HPM_MIN_LOAD 0 |
| #define RPM_VREG_8930_LDO_50_HPM_MIN_LOAD 5000 |
| #define RPM_VREG_8930_LDO_150_HPM_MIN_LOAD 10000 |
| #define RPM_VREG_8930_LDO_300_HPM_MIN_LOAD 10000 |
| #define RPM_VREG_8930_LDO_600_HPM_MIN_LOAD 10000 |
| #define RPM_VREG_8930_LDO_1200_HPM_MIN_LOAD 10000 |
| #define RPM_VREG_8930_SMPS_1500_HPM_MIN_LOAD 100000 |
| #define RPM_VREG_8930_SMPS_2000_HPM_MIN_LOAD 100000 |
| |
| #endif |