drivers/net/ixgbe/ixgbe_phy.c - kernel/msm - Gitiles

 /*******************************************************************************

   Intel 10 Gigabit PCI Express Linux driver
   Copyright(c) 1999 - 2008 Intel Corporation.

   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
   version 2, as published by the Free Software Foundation.

   This program is distributed in the hope it will be useful, but WITHOUT
   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
   more details.

   You should have received a copy of the GNU General Public License along with
   this program; if not, write to the Free Software Foundation, Inc.,
   51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.

   The full GNU General Public License is included in this distribution in
   the file called "COPYING".

   Contact Information:
   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497

 *******************************************************************************/

 #include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/sched.h>

 #include "ixgbe_common.h"
 #include "ixgbe_phy.h"

 static bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr);
 static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id);
 static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw);

 /**
  *  ixgbe_identify_phy_generic - Get physical layer module
  *  @hw: pointer to hardware structure
  *
  *  Determines the physical layer module found on the current adapter.
  **/
 s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
 {
 	s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
 	u32 phy_addr;

 	if (hw->phy.type == ixgbe_phy_unknown) {
 		for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
 			if (ixgbe_validate_phy_addr(hw, phy_addr)) {
 				hw->phy.addr = phy_addr;
 				ixgbe_get_phy_id(hw);
 				hw->phy.type =
 				        ixgbe_get_phy_type_from_id(hw->phy.id);
 				status = 0;
 				break;
 			}
 		}
 	} else {
 		status = 0;
 	}

 	return status;
 }

 /**
  *  ixgbe_validate_phy_addr - Determines phy address is valid
  *  @hw: pointer to hardware structure
  *
  **/
 static bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr)
 {
 	u16 phy_id = 0;
 	bool valid = false;

 	hw->phy.addr = phy_addr;
 	hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH,
 	                     IXGBE_MDIO_PMA_PMD_DEV_TYPE, &phy_id);

 	if (phy_id != 0xFFFF && phy_id != 0x0)
 		valid = true;

 	return valid;
 }

 /**
  *  ixgbe_get_phy_id - Get the phy type
  *  @hw: pointer to hardware structure
  *
  **/
 static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw)
 {
 	u32 status;
 	u16 phy_id_high = 0;
 	u16 phy_id_low = 0;

 	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH,
 	                              IXGBE_MDIO_PMA_PMD_DEV_TYPE,
 	                              &phy_id_high);

 	if (status == 0) {
 		hw->phy.id = (u32)(phy_id_high << 16);
 		status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_LOW,
 		                              IXGBE_MDIO_PMA_PMD_DEV_TYPE,
 		                              &phy_id_low);
 		hw->phy.id |= (u32)(phy_id_low & IXGBE_PHY_REVISION_MASK);
 		hw->phy.revision = (u32)(phy_id_low & ~IXGBE_PHY_REVISION_MASK);
 	}
 	return status;
 }

 /**
  *  ixgbe_get_phy_type_from_id - Get the phy type
  *  @hw: pointer to hardware structure
  *
  **/
 static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id)
 {
 	enum ixgbe_phy_type phy_type;

 	switch (phy_id) {
 	case QT2022_PHY_ID:
 		phy_type = ixgbe_phy_qt;
 		break;
 	default:
 		phy_type = ixgbe_phy_unknown;
 		break;
 	}

 	return phy_type;
 }

 /**
  *  ixgbe_reset_phy_generic - Performs a PHY reset
  *  @hw: pointer to hardware structure
  **/
 s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw)
 {
 	/*
 	 * Perform soft PHY reset to the PHY_XS.
 	 * This will cause a soft reset to the PHY
 	 */
 	return hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
 	                             IXGBE_MDIO_PHY_XS_DEV_TYPE,
 	                             IXGBE_MDIO_PHY_XS_RESET);
 }

 /**
  *  ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register
  *  @hw: pointer to hardware structure
  *  @reg_addr: 32 bit address of PHY register to read
  *  @phy_data: Pointer to read data from PHY register
  **/
 s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
                                u32 device_type, u16 *phy_data)
 {
 	u32 command;
 	u32 i;
 	u32 data;
 	s32 status = 0;
 	u16 gssr;

 	if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
 		gssr = IXGBE_GSSR_PHY1_SM;
 	else
 		gssr = IXGBE_GSSR_PHY0_SM;

 	if (ixgbe_acquire_swfw_sync(hw, gssr) != 0)
 		status = IXGBE_ERR_SWFW_SYNC;

 	if (status == 0) {
 		/* Setup and write the address cycle command */
 		command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
 		           (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
 		           (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
 		           (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));

 		IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);

 		/*
 		 * Check every 10 usec to see if the address cycle completed.
 		 * The MDI Command bit will clear when the operation is
 		 * complete
 		 */
 		for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
 			udelay(10);

 			command = IXGBE_READ_REG(hw, IXGBE_MSCA);

 			if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
 				break;
 		}

 		if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
 			hw_dbg(hw, "PHY address command did not complete.\n");
 			status = IXGBE_ERR_PHY;
 		}

 		if (status == 0) {
 			/*
 			 * Address cycle complete, setup and write the read
 			 * command
 			 */
 			command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
 			           (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
 			           (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
 			           (IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND));

 			IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);

 			/*
 			 * Check every 10 usec to see if the address cycle
 			 * completed. The MDI Command bit will clear when the
 			 * operation is complete
 			 */
 			for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
 				udelay(10);

 				command = IXGBE_READ_REG(hw, IXGBE_MSCA);

 				if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
 					break;
 			}

 			if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
 				hw_dbg(hw, "PHY read command didn't complete\n");
 				status = IXGBE_ERR_PHY;
 			} else {
 				/*
 				 * Read operation is complete.  Get the data
 				 * from MSRWD
 				 */
 				data = IXGBE_READ_REG(hw, IXGBE_MSRWD);
 				data >>= IXGBE_MSRWD_READ_DATA_SHIFT;
 				*phy_data = (u16)(data);
 			}
 		}

 		ixgbe_release_swfw_sync(hw, gssr);
 	}

 	return status;
 }

 /**
  *  ixgbe_write_phy_reg_generic - Writes a value to specified PHY register
  *  @hw: pointer to hardware structure
  *  @reg_addr: 32 bit PHY register to write
  *  @device_type: 5 bit device type
  *  @phy_data: Data to write to the PHY register
  **/
 s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
                                 u32 device_type, u16 phy_data)
 {
 	u32 command;
 	u32 i;
 	s32 status = 0;
 	u16 gssr;

 	if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
 		gssr = IXGBE_GSSR_PHY1_SM;
 	else
 		gssr = IXGBE_GSSR_PHY0_SM;

 	if (ixgbe_acquire_swfw_sync(hw, gssr) != 0)
 		status = IXGBE_ERR_SWFW_SYNC;

 	if (status == 0) {
 		/* Put the data in the MDI single read and write data register*/
 		IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data);

 		/* Setup and write the address cycle command */
 		command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
 		           (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
 		           (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
 		           (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));

 		IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);

 		/*
 		 * Check every 10 usec to see if the address cycle completed.
 		 * The MDI Command bit will clear when the operation is
 		 * complete
 		 */
 		for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
 			udelay(10);

 			command = IXGBE_READ_REG(hw, IXGBE_MSCA);

 			if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
 				break;
 		}

 		if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
 			hw_dbg(hw, "PHY address cmd didn't complete\n");
 			status = IXGBE_ERR_PHY;
 		}

 		if (status == 0) {
 			/*
 			 * Address cycle complete, setup and write the write
 			 * command
 			 */
 			command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
 			           (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
 			           (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
 			           (IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND));

 			IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);

 			/*
 			 * Check every 10 usec to see if the address cycle
 			 * completed. The MDI Command bit will clear when the
 			 * operation is complete
 			 */
 			for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
 				udelay(10);

 				command = IXGBE_READ_REG(hw, IXGBE_MSCA);

 				if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
 					break;
 			}

 			if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
 				hw_dbg(hw, "PHY address cmd didn't complete\n");
 				status = IXGBE_ERR_PHY;
 			}
 		}

 		ixgbe_release_swfw_sync(hw, gssr);
 	}

 	return status;
 }

 /**
  *  ixgbe_setup_phy_link_generic - Set and restart autoneg
  *  @hw: pointer to hardware structure
  *
  *  Restart autonegotiation and PHY and waits for completion.
  **/
 s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw)
 {
 	s32 status = IXGBE_NOT_IMPLEMENTED;
 	u32 time_out;
 	u32 max_time_out = 10;
 	u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;

 	/*
 	 * Set advertisement settings in PHY based on autoneg_advertised
 	 * settings. If autoneg_advertised = 0, then advertise default values
 	 * tnx devices cannot be "forced" to a autoneg 10G and fail.  But can
 	 * for a 1G.
 	 */
 	hw->phy.ops.read_reg(hw, IXGBE_MII_SPEED_SELECTION_REG,
 	                     IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg);

 	if (hw->phy.autoneg_advertised == IXGBE_LINK_SPEED_1GB_FULL)
 		autoneg_reg &= 0xEFFF; /* 0 in bit 12 is 1G operation */
 	else
 		autoneg_reg |= 0x1000; /* 1 in bit 12 is 10G/1G operation */

 	hw->phy.ops.write_reg(hw, IXGBE_MII_SPEED_SELECTION_REG,
 	                      IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg);

 	/* Restart PHY autonegotiation and wait for completion */
 	hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
 	                     IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg);

 	autoneg_reg |= IXGBE_MII_RESTART;

 	hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
 	                      IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg);

 	/* Wait for autonegotiation to finish */
 	for (time_out = 0; time_out < max_time_out; time_out++) {
 		udelay(10);
 		/* Restart PHY autonegotiation and wait for completion */
 		status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
 		                              IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
 		                              &autoneg_reg);

 		autoneg_reg &= IXGBE_MII_AUTONEG_COMPLETE;
 		if (autoneg_reg == IXGBE_MII_AUTONEG_COMPLETE) {
 			status = 0;
 			break;
 		}
 	}

 	if (time_out == max_time_out)
 		status = IXGBE_ERR_LINK_SETUP;

 	return status;
 }

 /**
  *  ixgbe_setup_phy_link_speed_generic - Sets the auto advertised capabilities
  *  @hw: pointer to hardware structure
  *  @speed: new link speed
  *  @autoneg: true if autonegotiation enabled
  **/
 s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
                                        ixgbe_link_speed speed,
                                        bool autoneg,
                                        bool autoneg_wait_to_complete)
 {

 	/*
 	 * Clear autoneg_advertised and set new values based on input link
 	 * speed.
 	 */
 	hw->phy.autoneg_advertised = 0;

 	if (speed & IXGBE_LINK_SPEED_10GB_FULL)
 		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;

 	if (speed & IXGBE_LINK_SPEED_1GB_FULL)
 		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;

 	/* Setup link based on the new speed settings */
 	hw->phy.ops.setup_link(hw);

 	return 0;
 }
	/*******************************************************************************

	Intel 10 Gigabit PCI Express Linux driver
	Copyright(c) 1999 - 2008 Intel Corporation.

	This program is free software; you can redistribute it and/or modify it
	under the terms and conditions of the GNU General Public License,
	version 2, as published by the Free Software Foundation.

	This program is distributed in the hope it will be useful, but WITHOUT
	ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
	FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
	more details.

	You should have received a copy of the GNU General Public License along with
	this program; if not, write to the Free Software Foundation, Inc.,
	51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.

	The full GNU General Public License is included in this distribution in
	the file called "COPYING".

	Contact Information:
	e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
	Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497

	*******************************************************************************/

	#include <linux/pci.h>
	#include <linux/delay.h>
	#include <linux/sched.h>

	#include "ixgbe_common.h"
	#include "ixgbe_phy.h"

	static bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr);
	static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id);
	static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw);

	/**
	* ixgbe_identify_phy_generic - Get physical layer module
	* @hw: pointer to hardware structure
	*
	* Determines the physical layer module found on the current adapter.
	**/
	s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
	{
	s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
	u32 phy_addr;

	if (hw->phy.type == ixgbe_phy_unknown) {
	for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
	if (ixgbe_validate_phy_addr(hw, phy_addr)) {
	hw->phy.addr = phy_addr;
	ixgbe_get_phy_id(hw);
	hw->phy.type =
	ixgbe_get_phy_type_from_id(hw->phy.id);
	status = 0;
	break;
	}
	}
	} else {
	status = 0;
	}

	return status;
	}

	/**
	* ixgbe_validate_phy_addr - Determines phy address is valid
	* @hw: pointer to hardware structure
	*
	**/
	static bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr)
	{
	u16 phy_id = 0;
	bool valid = false;

	hw->phy.addr = phy_addr;
	hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH,
	IXGBE_MDIO_PMA_PMD_DEV_TYPE, &phy_id);

	if (phy_id != 0xFFFF && phy_id != 0x0)
	valid = true;

	return valid;
	}

	/**
	* ixgbe_get_phy_id - Get the phy type
	* @hw: pointer to hardware structure
	*
	**/
	static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw)
	{
	u32 status;
	u16 phy_id_high = 0;
	u16 phy_id_low = 0;

	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH,
	IXGBE_MDIO_PMA_PMD_DEV_TYPE,
	&phy_id_high);

	if (status == 0) {
	hw->phy.id = (u32)(phy_id_high << 16);
	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_LOW,
	IXGBE_MDIO_PMA_PMD_DEV_TYPE,
	&phy_id_low);
	hw->phy.id \|= (u32)(phy_id_low & IXGBE_PHY_REVISION_MASK);
	hw->phy.revision = (u32)(phy_id_low & ~IXGBE_PHY_REVISION_MASK);
	}
	return status;
	}

	/**
	* ixgbe_get_phy_type_from_id - Get the phy type
	* @hw: pointer to hardware structure
	*
	**/
	static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id)
	{
	enum ixgbe_phy_type phy_type;

	switch (phy_id) {
	case QT2022_PHY_ID:
	phy_type = ixgbe_phy_qt;
	break;
	default:
	phy_type = ixgbe_phy_unknown;
	break;
	}

	return phy_type;
	}

	/**
	* ixgbe_reset_phy_generic - Performs a PHY reset
	* @hw: pointer to hardware structure
	**/
	s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw)
	{
	/*
	* Perform soft PHY reset to the PHY_XS.
	* This will cause a soft reset to the PHY
	*/
	return hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
	IXGBE_MDIO_PHY_XS_DEV_TYPE,
	IXGBE_MDIO_PHY_XS_RESET);
	}

	/**
	* ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register
	* @hw: pointer to hardware structure
	* @reg_addr: 32 bit address of PHY register to read
	* @phy_data: Pointer to read data from PHY register
	**/
	s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
	u32 device_type, u16 *phy_data)
	{
	u32 command;
	u32 i;
	u32 data;
	s32 status = 0;
	u16 gssr;

	if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
	gssr = IXGBE_GSSR_PHY1_SM;
	else
	gssr = IXGBE_GSSR_PHY0_SM;

	if (ixgbe_acquire_swfw_sync(hw, gssr) != 0)
	status = IXGBE_ERR_SWFW_SYNC;

	if (status == 0) {
	/* Setup and write the address cycle command */
	command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) \|
	(device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) \|
	(hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) \|
	(IXGBE_MSCA_ADDR_CYCLE \| IXGBE_MSCA_MDI_COMMAND));

	IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);

	/*
	* Check every 10 usec to see if the address cycle completed.
	* The MDI Command bit will clear when the operation is
	* complete
	*/
	for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
	udelay(10);

	command = IXGBE_READ_REG(hw, IXGBE_MSCA);

	if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
	break;
	}

	if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
	hw_dbg(hw, "PHY address command did not complete.\n");
	status = IXGBE_ERR_PHY;
	}

	if (status == 0) {
	/*
	* Address cycle complete, setup and write the read
	* command
	*/
	command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) \|
	(device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) \|
	(hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) \|
	(IXGBE_MSCA_READ \| IXGBE_MSCA_MDI_COMMAND));

	IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);

	/*
	* Check every 10 usec to see if the address cycle
	* completed. The MDI Command bit will clear when the
	* operation is complete
	*/
	for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
	udelay(10);

	command = IXGBE_READ_REG(hw, IXGBE_MSCA);

	if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
	break;
	}

	if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
	hw_dbg(hw, "PHY read command didn't complete\n");
	status = IXGBE_ERR_PHY;
	} else {
	/*
	* Read operation is complete. Get the data
	* from MSRWD
	*/
	data = IXGBE_READ_REG(hw, IXGBE_MSRWD);
	data >>= IXGBE_MSRWD_READ_DATA_SHIFT;
	*phy_data = (u16)(data);
	}
	}

	ixgbe_release_swfw_sync(hw, gssr);
	}

	return status;
	}

	/**
	* ixgbe_write_phy_reg_generic - Writes a value to specified PHY register
	* @hw: pointer to hardware structure
	* @reg_addr: 32 bit PHY register to write
	* @device_type: 5 bit device type
	* @phy_data: Data to write to the PHY register
	**/
	s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
	u32 device_type, u16 phy_data)
	{
	u32 command;
	u32 i;
	s32 status = 0;
	u16 gssr;

	if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
	gssr = IXGBE_GSSR_PHY1_SM;
	else
	gssr = IXGBE_GSSR_PHY0_SM;

	if (ixgbe_acquire_swfw_sync(hw, gssr) != 0)
	status = IXGBE_ERR_SWFW_SYNC;

	if (status == 0) {
	/* Put the data in the MDI single read and write data register*/
	IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data);

	/* Setup and write the address cycle command */
	command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) \|
	(device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) \|
	(hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) \|
	(IXGBE_MSCA_ADDR_CYCLE \| IXGBE_MSCA_MDI_COMMAND));

	IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);

	/*
	* Check every 10 usec to see if the address cycle completed.
	* The MDI Command bit will clear when the operation is
	* complete
	*/
	for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
	udelay(10);

	command = IXGBE_READ_REG(hw, IXGBE_MSCA);

	if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
	break;
	}

	if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
	hw_dbg(hw, "PHY address cmd didn't complete\n");
	status = IXGBE_ERR_PHY;
	}

	if (status == 0) {
	/*
	* Address cycle complete, setup and write the write
	* command
	*/
	command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) \|
	(device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) \|
	(hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) \|
	(IXGBE_MSCA_WRITE \| IXGBE_MSCA_MDI_COMMAND));

	IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);

	/*
	* Check every 10 usec to see if the address cycle
	* completed. The MDI Command bit will clear when the
	* operation is complete
	*/
	for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
	udelay(10);

	command = IXGBE_READ_REG(hw, IXGBE_MSCA);

	if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
	break;
	}

	if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
	hw_dbg(hw, "PHY address cmd didn't complete\n");
	status = IXGBE_ERR_PHY;
	}
	}

	ixgbe_release_swfw_sync(hw, gssr);
	}

	return status;
	}

	/**
	* ixgbe_setup_phy_link_generic - Set and restart autoneg
	* @hw: pointer to hardware structure
	*
	* Restart autonegotiation and PHY and waits for completion.
	**/
	s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw)
	{
	s32 status = IXGBE_NOT_IMPLEMENTED;
	u32 time_out;
	u32 max_time_out = 10;
	u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;

	/*
	* Set advertisement settings in PHY based on autoneg_advertised
	* settings. If autoneg_advertised = 0, then advertise default values
	* tnx devices cannot be "forced" to a autoneg 10G and fail. But can
	* for a 1G.
	*/
	hw->phy.ops.read_reg(hw, IXGBE_MII_SPEED_SELECTION_REG,
	IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg);

	if (hw->phy.autoneg_advertised == IXGBE_LINK_SPEED_1GB_FULL)
	autoneg_reg &= 0xEFFF; /* 0 in bit 12 is 1G operation */
	else
	autoneg_reg \|= 0x1000; /* 1 in bit 12 is 10G/1G operation */

	hw->phy.ops.write_reg(hw, IXGBE_MII_SPEED_SELECTION_REG,
	IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg);

	/* Restart PHY autonegotiation and wait for completion */
	hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
	IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg);

	autoneg_reg \|= IXGBE_MII_RESTART;

	hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
	IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg);

	/* Wait for autonegotiation to finish */
	for (time_out = 0; time_out < max_time_out; time_out++) {
	udelay(10);
	/* Restart PHY autonegotiation and wait for completion */
	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
	IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
	&autoneg_reg);

	autoneg_reg &= IXGBE_MII_AUTONEG_COMPLETE;
	if (autoneg_reg == IXGBE_MII_AUTONEG_COMPLETE) {
	status = 0;
	break;
	}
	}

	if (time_out == max_time_out)
	status = IXGBE_ERR_LINK_SETUP;

	return status;
	}

	/**
	* ixgbe_setup_phy_link_speed_generic - Sets the auto advertised capabilities
	* @hw: pointer to hardware structure
	* @speed: new link speed
	* @autoneg: true if autonegotiation enabled
	**/
	s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
	ixgbe_link_speed speed,
	bool autoneg,
	bool autoneg_wait_to_complete)
	{

	/*
	* Clear autoneg_advertised and set new values based on input link
	* speed.
	*/
	hw->phy.autoneg_advertised = 0;

	if (speed & IXGBE_LINK_SPEED_10GB_FULL)
	hw->phy.autoneg_advertised \|= IXGBE_LINK_SPEED_10GB_FULL;

	if (speed & IXGBE_LINK_SPEED_1GB_FULL)
	hw->phy.autoneg_advertised \|= IXGBE_LINK_SPEED_1GB_FULL;

	/* Setup link based on the new speed settings */
	hw->phy.ops.setup_link(hw);

	return 0;
	}