| /* Copyright (c) 2010-2012, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #include <linux/export.h> |
| #include <linux/interrupt.h> |
| #include <asm/page.h> |
| #include <linux/pm_runtime.h> |
| #include <mach/msm_iomap.h> |
| #include <mach/msm_bus.h> |
| #include <linux/ktime.h> |
| |
| #include "kgsl.h" |
| #include "kgsl_pwrscale.h" |
| #include "kgsl_device.h" |
| #include "kgsl_trace.h" |
| |
| #define KGSL_PWRFLAGS_POWER_ON 0 |
| #define KGSL_PWRFLAGS_CLK_ON 1 |
| #define KGSL_PWRFLAGS_AXI_ON 2 |
| #define KGSL_PWRFLAGS_IRQ_ON 3 |
| |
| #define GPU_SWFI_LATENCY 3 |
| #define UPDATE_BUSY_VAL 1000000 |
| #define UPDATE_BUSY 50 |
| |
| struct clk_pair { |
| const char *name; |
| uint map; |
| }; |
| |
| struct clk_pair clks[KGSL_MAX_CLKS] = { |
| { |
| .name = "src_clk", |
| .map = KGSL_CLK_SRC, |
| }, |
| { |
| .name = "core_clk", |
| .map = KGSL_CLK_CORE, |
| }, |
| { |
| .name = "iface_clk", |
| .map = KGSL_CLK_IFACE, |
| }, |
| { |
| .name = "mem_clk", |
| .map = KGSL_CLK_MEM, |
| }, |
| { |
| .name = "mem_iface_clk", |
| .map = KGSL_CLK_MEM_IFACE, |
| }, |
| }; |
| |
| /* Update the elapsed time at a particular clock level |
| * if the device is active(on_time = true).Otherwise |
| * store it as sleep time. |
| */ |
| static void update_clk_statistics(struct kgsl_device *device, |
| bool on_time) |
| { |
| struct kgsl_pwrctrl *pwr = &device->pwrctrl; |
| struct kgsl_clk_stats *clkstats = &pwr->clk_stats; |
| ktime_t elapsed; |
| int elapsed_us; |
| if (clkstats->start.tv64 == 0) |
| clkstats->start = ktime_get(); |
| clkstats->stop = ktime_get(); |
| elapsed = ktime_sub(clkstats->stop, clkstats->start); |
| elapsed_us = ktime_to_us(elapsed); |
| clkstats->elapsed += elapsed_us; |
| if (on_time) |
| clkstats->clock_time[pwr->active_pwrlevel] += elapsed_us; |
| else |
| clkstats->clock_time[pwr->num_pwrlevels - 1] += elapsed_us; |
| clkstats->start = ktime_get(); |
| } |
| |
| void kgsl_pwrctrl_pwrlevel_change(struct kgsl_device *device, |
| unsigned int new_level) |
| { |
| struct kgsl_pwrctrl *pwr = &device->pwrctrl; |
| if (new_level < (pwr->num_pwrlevels - 1) && |
| new_level >= pwr->thermal_pwrlevel && |
| new_level != pwr->active_pwrlevel) { |
| struct kgsl_pwrlevel *pwrlevel = &pwr->pwrlevels[new_level]; |
| int diff = new_level - pwr->active_pwrlevel; |
| int d = (diff > 0) ? 1 : -1; |
| int level = pwr->active_pwrlevel; |
| /* Update the clock stats */ |
| update_clk_statistics(device, true); |
| /* Finally set active level */ |
| pwr->active_pwrlevel = new_level; |
| if ((test_bit(KGSL_PWRFLAGS_CLK_ON, &pwr->power_flags)) || |
| (device->state == KGSL_STATE_NAP)) { |
| /* |
| * On some platforms, instability is caused on |
| * changing clock freq when the core is busy. |
| * Idle the gpu core before changing the clock freq. |
| */ |
| if (pwr->idle_needed == true) |
| device->ftbl->idle(device); |
| |
| /* Don't shift by more than one level at a time to |
| * avoid glitches. |
| */ |
| while (level != new_level) { |
| level += d; |
| clk_set_rate(pwr->grp_clks[0], |
| pwr->pwrlevels[level].gpu_freq); |
| } |
| } |
| if (test_bit(KGSL_PWRFLAGS_AXI_ON, &pwr->power_flags)) { |
| if (pwr->pcl) |
| msm_bus_scale_client_update_request(pwr->pcl, |
| pwrlevel->bus_freq); |
| else if (pwr->ebi1_clk) |
| clk_set_rate(pwr->ebi1_clk, pwrlevel->bus_freq); |
| } |
| trace_kgsl_pwrlevel(device, pwr->active_pwrlevel, |
| pwrlevel->gpu_freq); |
| } |
| } |
| EXPORT_SYMBOL(kgsl_pwrctrl_pwrlevel_change); |
| |
| static int __gpuclk_store(int max, struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { int ret, i, delta = 5000000; |
| unsigned long val; |
| struct kgsl_device *device = kgsl_device_from_dev(dev); |
| struct kgsl_pwrctrl *pwr; |
| |
| if (device == NULL) |
| return 0; |
| pwr = &device->pwrctrl; |
| |
| ret = sscanf(buf, "%ld", &val); |
| if (ret != 1) |
| return count; |
| |
| mutex_lock(&device->mutex); |
| for (i = 0; i < pwr->num_pwrlevels - 1; i++) { |
| if (abs(pwr->pwrlevels[i].gpu_freq - val) < delta) { |
| if (max) |
| pwr->thermal_pwrlevel = i; |
| break; |
| } |
| } |
| |
| if (i == (pwr->num_pwrlevels - 1)) |
| goto done; |
| |
| /* |
| * If the current or requested clock speed is greater than the |
| * thermal limit, bump down immediately. |
| */ |
| |
| if (pwr->pwrlevels[pwr->active_pwrlevel].gpu_freq > |
| pwr->pwrlevels[pwr->thermal_pwrlevel].gpu_freq) |
| kgsl_pwrctrl_pwrlevel_change(device, pwr->thermal_pwrlevel); |
| else if (!max) |
| kgsl_pwrctrl_pwrlevel_change(device, i); |
| |
| done: |
| mutex_unlock(&device->mutex); |
| return count; |
| } |
| |
| static int kgsl_pwrctrl_max_gpuclk_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| return __gpuclk_store(1, dev, attr, buf, count); |
| } |
| |
| static int kgsl_pwrctrl_max_gpuclk_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct kgsl_device *device = kgsl_device_from_dev(dev); |
| struct kgsl_pwrctrl *pwr; |
| if (device == NULL) |
| return 0; |
| pwr = &device->pwrctrl; |
| return snprintf(buf, PAGE_SIZE, "%d\n", |
| pwr->pwrlevels[pwr->thermal_pwrlevel].gpu_freq); |
| } |
| |
| static int kgsl_pwrctrl_gpuclk_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| return __gpuclk_store(0, dev, attr, buf, count); |
| } |
| |
| static int kgsl_pwrctrl_gpuclk_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct kgsl_device *device = kgsl_device_from_dev(dev); |
| struct kgsl_pwrctrl *pwr; |
| if (device == NULL) |
| return 0; |
| pwr = &device->pwrctrl; |
| return snprintf(buf, PAGE_SIZE, "%d\n", |
| pwr->pwrlevels[pwr->active_pwrlevel].gpu_freq); |
| } |
| |
| static int kgsl_pwrctrl_pwrnap_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| char temp[20]; |
| unsigned long val; |
| struct kgsl_device *device = kgsl_device_from_dev(dev); |
| struct kgsl_pwrctrl *pwr; |
| int rc; |
| |
| if (device == NULL) |
| return 0; |
| pwr = &device->pwrctrl; |
| |
| snprintf(temp, sizeof(temp), "%.*s", |
| (int)min(count, sizeof(temp) - 1), buf); |
| rc = strict_strtoul(temp, 0, &val); |
| if (rc) |
| return rc; |
| |
| mutex_lock(&device->mutex); |
| |
| if (val == 1) |
| pwr->nap_allowed = true; |
| else if (val == 0) |
| pwr->nap_allowed = false; |
| |
| mutex_unlock(&device->mutex); |
| |
| return count; |
| } |
| |
| static int kgsl_pwrctrl_pwrnap_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct kgsl_device *device = kgsl_device_from_dev(dev); |
| if (device == NULL) |
| return 0; |
| return snprintf(buf, PAGE_SIZE, "%d\n", device->pwrctrl.nap_allowed); |
| } |
| |
| |
| static int kgsl_pwrctrl_idle_timer_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| char temp[20]; |
| unsigned long val; |
| struct kgsl_device *device = kgsl_device_from_dev(dev); |
| struct kgsl_pwrctrl *pwr; |
| const long div = 1000/HZ; |
| static unsigned int org_interval_timeout = 1; |
| int rc; |
| |
| if (device == NULL) |
| return 0; |
| pwr = &device->pwrctrl; |
| |
| snprintf(temp, sizeof(temp), "%.*s", |
| (int)min(count, sizeof(temp) - 1), buf); |
| rc = strict_strtoul(temp, 0, &val); |
| if (rc) |
| return rc; |
| |
| if (org_interval_timeout == 1) |
| org_interval_timeout = pwr->interval_timeout; |
| |
| mutex_lock(&device->mutex); |
| |
| /* Let the timeout be requested in ms, but convert to jiffies. */ |
| val /= div; |
| if (val >= org_interval_timeout) |
| pwr->interval_timeout = val; |
| |
| mutex_unlock(&device->mutex); |
| |
| return count; |
| } |
| |
| static int kgsl_pwrctrl_idle_timer_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct kgsl_device *device = kgsl_device_from_dev(dev); |
| if (device == NULL) |
| return 0; |
| return snprintf(buf, PAGE_SIZE, "%d\n", |
| device->pwrctrl.interval_timeout); |
| } |
| |
| static int kgsl_pwrctrl_gpubusy_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| int ret; |
| struct kgsl_device *device = kgsl_device_from_dev(dev); |
| struct kgsl_clk_stats *clkstats = &device->pwrctrl.clk_stats; |
| ret = snprintf(buf, PAGE_SIZE, "%7d %7d\n", |
| clkstats->on_time_old, clkstats->elapsed_old); |
| if (!test_bit(KGSL_PWRFLAGS_AXI_ON, &device->pwrctrl.power_flags)) { |
| clkstats->on_time_old = 0; |
| clkstats->elapsed_old = 0; |
| } |
| return ret; |
| } |
| |
| static int kgsl_pwrctrl_gputop_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| int ret; |
| struct kgsl_device *device = kgsl_device_from_dev(dev); |
| struct kgsl_clk_stats *clkstats = &device->pwrctrl.clk_stats; |
| int i = 0; |
| char *ptr = buf; |
| |
| ret = snprintf(buf, PAGE_SIZE, "%7d %7d ", clkstats->on_time_old, |
| clkstats->elapsed_old); |
| for (i = 0, ptr += ret; i < device->pwrctrl.num_pwrlevels; |
| i++, ptr += ret) |
| ret = snprintf(ptr, PAGE_SIZE, "%7d ", |
| clkstats->old_clock_time[i]); |
| |
| if (!test_bit(KGSL_PWRFLAGS_AXI_ON, &device->pwrctrl.power_flags)) { |
| clkstats->on_time_old = 0; |
| clkstats->elapsed_old = 0; |
| for (i = 0; i < KGSL_MAX_PWRLEVELS ; i++) |
| clkstats->old_clock_time[i] = 0; |
| } |
| return (unsigned int) (ptr - buf); |
| } |
| |
| static int kgsl_pwrctrl_gpu_available_frequencies_show( |
| struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct kgsl_device *device = kgsl_device_from_dev(dev); |
| struct kgsl_pwrctrl *pwr; |
| int index, num_chars = 0; |
| |
| if (device == NULL) |
| return 0; |
| pwr = &device->pwrctrl; |
| for (index = 0; index < pwr->num_pwrlevels - 1; index++) |
| num_chars += snprintf(buf + num_chars, PAGE_SIZE, "%d ", |
| pwr->pwrlevels[index].gpu_freq); |
| buf[num_chars++] = '\n'; |
| return num_chars; |
| } |
| |
| DEVICE_ATTR(gpuclk, 0644, kgsl_pwrctrl_gpuclk_show, kgsl_pwrctrl_gpuclk_store); |
| DEVICE_ATTR(max_gpuclk, 0644, kgsl_pwrctrl_max_gpuclk_show, |
| kgsl_pwrctrl_max_gpuclk_store); |
| DEVICE_ATTR(pwrnap, 0664, kgsl_pwrctrl_pwrnap_show, kgsl_pwrctrl_pwrnap_store); |
| DEVICE_ATTR(idle_timer, 0644, kgsl_pwrctrl_idle_timer_show, |
| kgsl_pwrctrl_idle_timer_store); |
| DEVICE_ATTR(gpubusy, 0444, kgsl_pwrctrl_gpubusy_show, |
| NULL); |
| DEVICE_ATTR(gputop, 0444, kgsl_pwrctrl_gputop_show, |
| NULL); |
| DEVICE_ATTR(gpu_available_frequencies, 0444, |
| kgsl_pwrctrl_gpu_available_frequencies_show, |
| NULL); |
| |
| static const struct device_attribute *pwrctrl_attr_list[] = { |
| &dev_attr_gpuclk, |
| &dev_attr_max_gpuclk, |
| &dev_attr_pwrnap, |
| &dev_attr_idle_timer, |
| &dev_attr_gpubusy, |
| &dev_attr_gputop, |
| &dev_attr_gpu_available_frequencies, |
| NULL |
| }; |
| |
| int kgsl_pwrctrl_init_sysfs(struct kgsl_device *device) |
| { |
| return kgsl_create_device_sysfs_files(device->dev, pwrctrl_attr_list); |
| } |
| |
| void kgsl_pwrctrl_uninit_sysfs(struct kgsl_device *device) |
| { |
| kgsl_remove_device_sysfs_files(device->dev, pwrctrl_attr_list); |
| } |
| |
| static void update_statistics(struct kgsl_device *device) |
| { |
| struct kgsl_clk_stats *clkstats = &device->pwrctrl.clk_stats; |
| unsigned int on_time = 0; |
| int i; |
| int num_pwrlevels = device->pwrctrl.num_pwrlevels - 1; |
| /*PER CLK TIME*/ |
| for (i = 0; i < num_pwrlevels; i++) { |
| clkstats->old_clock_time[i] = clkstats->clock_time[i]; |
| on_time += clkstats->clock_time[i]; |
| clkstats->clock_time[i] = 0; |
| } |
| clkstats->old_clock_time[num_pwrlevels] = |
| clkstats->clock_time[num_pwrlevels]; |
| clkstats->clock_time[num_pwrlevels] = 0; |
| clkstats->on_time_old = on_time; |
| clkstats->elapsed_old = clkstats->elapsed; |
| clkstats->elapsed = 0; |
| } |
| |
| /* Track the amount of time the gpu is on vs the total system time. * |
| * Regularly update the percentage of busy time displayed by sysfs. */ |
| static void kgsl_pwrctrl_busy_time(struct kgsl_device *device, bool on_time) |
| { |
| struct kgsl_clk_stats *clkstats = &device->pwrctrl.clk_stats; |
| update_clk_statistics(device, on_time); |
| /* Update the output regularly and reset the counters. */ |
| if ((clkstats->elapsed > UPDATE_BUSY_VAL) || |
| !test_bit(KGSL_PWRFLAGS_AXI_ON, &device->pwrctrl.power_flags)) { |
| update_statistics(device); |
| } |
| } |
| |
| void kgsl_pwrctrl_clk(struct kgsl_device *device, int state, |
| int requested_state) |
| { |
| struct kgsl_pwrctrl *pwr = &device->pwrctrl; |
| int i = 0; |
| if (state == KGSL_PWRFLAGS_OFF) { |
| if (test_and_clear_bit(KGSL_PWRFLAGS_CLK_ON, |
| &pwr->power_flags)) { |
| trace_kgsl_clk(device, state); |
| for (i = KGSL_MAX_CLKS - 1; i > 0; i--) |
| if (pwr->grp_clks[i]) |
| clk_disable(pwr->grp_clks[i]); |
| /* High latency clock maintenance. */ |
| if ((pwr->pwrlevels[0].gpu_freq > 0) && |
| (requested_state != KGSL_STATE_NAP)) { |
| clk_set_rate(pwr->grp_clks[0], |
| pwr->pwrlevels[pwr->num_pwrlevels - 1]. |
| gpu_freq); |
| for (i = KGSL_MAX_CLKS - 1; i > 0; i--) |
| if (pwr->grp_clks[i]) |
| clk_unprepare(pwr->grp_clks[i]); |
| } |
| kgsl_pwrctrl_busy_time(device, true); |
| } |
| } else if (state == KGSL_PWRFLAGS_ON) { |
| if (!test_and_set_bit(KGSL_PWRFLAGS_CLK_ON, |
| &pwr->power_flags)) { |
| trace_kgsl_clk(device, state); |
| /* High latency clock maintenance. */ |
| if (device->state != KGSL_STATE_NAP) { |
| for (i = KGSL_MAX_CLKS - 1; i > 0; i--) |
| if (pwr->grp_clks[i]) |
| clk_prepare(pwr->grp_clks[i]); |
| |
| if (pwr->pwrlevels[0].gpu_freq > 0) |
| clk_set_rate(pwr->grp_clks[0], |
| pwr->pwrlevels |
| [pwr->active_pwrlevel]. |
| gpu_freq); |
| } |
| /* as last step, enable grp_clk |
| this is to let GPU interrupt to come */ |
| for (i = KGSL_MAX_CLKS - 1; i > 0; i--) |
| if (pwr->grp_clks[i]) |
| clk_enable(pwr->grp_clks[i]); |
| kgsl_pwrctrl_busy_time(device, false); |
| } |
| } |
| } |
| |
| void kgsl_pwrctrl_axi(struct kgsl_device *device, int state) |
| { |
| struct kgsl_pwrctrl *pwr = &device->pwrctrl; |
| |
| if (state == KGSL_PWRFLAGS_OFF) { |
| if (test_and_clear_bit(KGSL_PWRFLAGS_AXI_ON, |
| &pwr->power_flags)) { |
| trace_kgsl_bus(device, state); |
| if (pwr->ebi1_clk) { |
| clk_set_rate(pwr->ebi1_clk, 0); |
| clk_disable_unprepare(pwr->ebi1_clk); |
| } |
| if (pwr->pcl) |
| msm_bus_scale_client_update_request(pwr->pcl, |
| 0); |
| } |
| } else if (state == KGSL_PWRFLAGS_ON) { |
| if (!test_and_set_bit(KGSL_PWRFLAGS_AXI_ON, |
| &pwr->power_flags)) { |
| trace_kgsl_bus(device, state); |
| if (pwr->ebi1_clk) { |
| clk_prepare_enable(pwr->ebi1_clk); |
| clk_set_rate(pwr->ebi1_clk, |
| pwr->pwrlevels[pwr->active_pwrlevel]. |
| bus_freq); |
| } |
| if (pwr->pcl) |
| msm_bus_scale_client_update_request(pwr->pcl, |
| pwr->pwrlevels[pwr->active_pwrlevel]. |
| bus_freq); |
| } |
| } |
| } |
| |
| void kgsl_pwrctrl_pwrrail(struct kgsl_device *device, int state) |
| { |
| struct kgsl_pwrctrl *pwr = &device->pwrctrl; |
| |
| if (state == KGSL_PWRFLAGS_OFF) { |
| if (test_and_clear_bit(KGSL_PWRFLAGS_POWER_ON, |
| &pwr->power_flags)) { |
| trace_kgsl_rail(device, state); |
| if (pwr->gpu_cx) |
| regulator_disable(pwr->gpu_cx); |
| if (pwr->gpu_reg) |
| regulator_disable(pwr->gpu_reg); |
| } |
| } else if (state == KGSL_PWRFLAGS_ON) { |
| if (!test_and_set_bit(KGSL_PWRFLAGS_POWER_ON, |
| &pwr->power_flags)) { |
| trace_kgsl_rail(device, state); |
| if (pwr->gpu_reg) { |
| int status = regulator_enable(pwr->gpu_reg); |
| if (status) |
| KGSL_DRV_ERR(device, |
| "core regulator_enable " |
| "failed: %d\n", |
| status); |
| } |
| if (pwr->gpu_cx) { |
| int status = regulator_enable(pwr->gpu_cx); |
| if (status) |
| KGSL_DRV_ERR(device, |
| "cx regulator_enable " |
| "failed: %d\n", |
| status); |
| } |
| } |
| } |
| } |
| |
| void kgsl_pwrctrl_irq(struct kgsl_device *device, int state) |
| { |
| struct kgsl_pwrctrl *pwr = &device->pwrctrl; |
| |
| if (state == KGSL_PWRFLAGS_ON) { |
| if (!test_and_set_bit(KGSL_PWRFLAGS_IRQ_ON, |
| &pwr->power_flags)) { |
| trace_kgsl_irq(device, state); |
| enable_irq(pwr->interrupt_num); |
| } |
| } else if (state == KGSL_PWRFLAGS_OFF) { |
| if (test_and_clear_bit(KGSL_PWRFLAGS_IRQ_ON, |
| &pwr->power_flags)) { |
| trace_kgsl_irq(device, state); |
| if (in_interrupt()) |
| disable_irq_nosync(pwr->interrupt_num); |
| else |
| disable_irq(pwr->interrupt_num); |
| } |
| } |
| } |
| EXPORT_SYMBOL(kgsl_pwrctrl_irq); |
| |
| int kgsl_pwrctrl_init(struct kgsl_device *device) |
| { |
| int i, result = 0; |
| struct clk *clk; |
| struct platform_device *pdev = |
| container_of(device->parentdev, struct platform_device, dev); |
| struct kgsl_pwrctrl *pwr = &device->pwrctrl; |
| struct kgsl_device_platform_data *pdata = pdev->dev.platform_data; |
| |
| /*acquire clocks */ |
| for (i = 0; i < KGSL_MAX_CLKS; i++) { |
| if (pdata->clk_map & clks[i].map) { |
| clk = clk_get(&pdev->dev, clks[i].name); |
| if (IS_ERR(clk)) |
| goto clk_err; |
| pwr->grp_clks[i] = clk; |
| } |
| } |
| /* Make sure we have a source clk for freq setting */ |
| if (pwr->grp_clks[0] == NULL) |
| pwr->grp_clks[0] = pwr->grp_clks[1]; |
| |
| /* put the AXI bus into asynchronous mode with the graphics cores */ |
| if (pdata->set_grp_async != NULL) |
| pdata->set_grp_async(); |
| |
| if (pdata->num_levels > KGSL_MAX_PWRLEVELS) { |
| KGSL_PWR_ERR(device, "invalid power level count: %d\n", |
| pdata->num_levels); |
| result = -EINVAL; |
| goto done; |
| } |
| pwr->num_pwrlevels = pdata->num_levels; |
| pwr->active_pwrlevel = pdata->init_level; |
| pwr->default_pwrlevel = pdata->init_level; |
| for (i = 0; i < pdata->num_levels; i++) { |
| pwr->pwrlevels[i].gpu_freq = |
| (pdata->pwrlevel[i].gpu_freq > 0) ? |
| clk_round_rate(pwr->grp_clks[0], |
| pdata->pwrlevel[i]. |
| gpu_freq) : 0; |
| pwr->pwrlevels[i].bus_freq = |
| pdata->pwrlevel[i].bus_freq; |
| pwr->pwrlevels[i].io_fraction = |
| pdata->pwrlevel[i].io_fraction; |
| } |
| /* Do not set_rate for targets in sync with AXI */ |
| if (pwr->pwrlevels[0].gpu_freq > 0) |
| clk_set_rate(pwr->grp_clks[0], pwr-> |
| pwrlevels[pwr->num_pwrlevels - 1].gpu_freq); |
| |
| pwr->gpu_reg = regulator_get(&pdev->dev, "vdd"); |
| if (IS_ERR(pwr->gpu_reg)) |
| pwr->gpu_reg = NULL; |
| |
| if (pwr->gpu_reg) { |
| pwr->gpu_cx = regulator_get(&pdev->dev, "vddcx"); |
| if (IS_ERR(pwr->gpu_cx)) |
| pwr->gpu_cx = NULL; |
| } else |
| pwr->gpu_cx = NULL; |
| |
| pwr->power_flags = 0; |
| |
| pwr->nap_allowed = pdata->nap_allowed; |
| pwr->idle_needed = pdata->idle_needed; |
| pwr->interval_timeout = pdata->idle_timeout; |
| pwr->strtstp_sleepwake = pdata->strtstp_sleepwake; |
| pwr->ebi1_clk = clk_get(&pdev->dev, "bus_clk"); |
| if (IS_ERR(pwr->ebi1_clk)) |
| pwr->ebi1_clk = NULL; |
| else |
| clk_set_rate(pwr->ebi1_clk, |
| pwr->pwrlevels[pwr->active_pwrlevel]. |
| bus_freq); |
| if (pdata->bus_scale_table != NULL) { |
| pwr->pcl = msm_bus_scale_register_client(pdata-> |
| bus_scale_table); |
| if (!pwr->pcl) { |
| KGSL_PWR_ERR(device, |
| "msm_bus_scale_register_client failed: " |
| "id %d table %p", device->id, |
| pdata->bus_scale_table); |
| result = -EINVAL; |
| goto done; |
| } |
| } |
| |
| |
| pm_runtime_enable(device->parentdev); |
| register_early_suspend(&device->display_off); |
| return result; |
| |
| clk_err: |
| result = PTR_ERR(clk); |
| KGSL_PWR_ERR(device, "clk_get(%s) failed: %d\n", |
| clks[i].name, result); |
| |
| done: |
| return result; |
| } |
| |
| void kgsl_pwrctrl_close(struct kgsl_device *device) |
| { |
| struct kgsl_pwrctrl *pwr = &device->pwrctrl; |
| int i; |
| |
| KGSL_PWR_INFO(device, "close device %d\n", device->id); |
| |
| pm_runtime_disable(device->parentdev); |
| unregister_early_suspend(&device->display_off); |
| |
| clk_put(pwr->ebi1_clk); |
| |
| if (pwr->pcl) |
| msm_bus_scale_unregister_client(pwr->pcl); |
| |
| pwr->pcl = 0; |
| |
| if (pwr->gpu_reg) { |
| regulator_put(pwr->gpu_reg); |
| pwr->gpu_reg = NULL; |
| } |
| |
| if (pwr->gpu_cx) { |
| regulator_put(pwr->gpu_cx); |
| pwr->gpu_cx = NULL; |
| } |
| |
| for (i = 1; i < KGSL_MAX_CLKS; i++) |
| if (pwr->grp_clks[i]) { |
| clk_put(pwr->grp_clks[i]); |
| pwr->grp_clks[i] = NULL; |
| } |
| |
| pwr->grp_clks[0] = NULL; |
| pwr->power_flags = 0; |
| } |
| |
| void kgsl_idle_check(struct work_struct *work) |
| { |
| struct kgsl_device *device = container_of(work, struct kgsl_device, |
| idle_check_ws); |
| WARN_ON(device == NULL); |
| if (device == NULL) |
| return; |
| |
| mutex_lock(&device->mutex); |
| if (device->state & (KGSL_STATE_ACTIVE | KGSL_STATE_NAP)) { |
| kgsl_pwrscale_idle(device, 0); |
| |
| if (kgsl_pwrctrl_sleep(device) != 0) { |
| mod_timer(&device->idle_timer, |
| jiffies + |
| device->pwrctrl.interval_timeout); |
| /* If the GPU has been too busy to sleep, make sure * |
| * that is acurately reflected in the % busy numbers. */ |
| device->pwrctrl.clk_stats.no_nap_cnt++; |
| if (device->pwrctrl.clk_stats.no_nap_cnt > |
| UPDATE_BUSY) { |
| kgsl_pwrctrl_busy_time(device, true); |
| device->pwrctrl.clk_stats.no_nap_cnt = 0; |
| } |
| } |
| } else if (device->state & (KGSL_STATE_HUNG | |
| KGSL_STATE_DUMP_AND_RECOVER)) { |
| kgsl_pwrctrl_request_state(device, KGSL_STATE_NONE); |
| } |
| |
| mutex_unlock(&device->mutex); |
| } |
| |
| void kgsl_timer(unsigned long data) |
| { |
| struct kgsl_device *device = (struct kgsl_device *) data; |
| |
| KGSL_PWR_INFO(device, "idle timer expired device %d\n", device->id); |
| if (device->requested_state != KGSL_STATE_SUSPEND) { |
| if (device->pwrctrl.restore_slumber || |
| device->pwrctrl.strtstp_sleepwake) |
| kgsl_pwrctrl_request_state(device, KGSL_STATE_SLUMBER); |
| else |
| kgsl_pwrctrl_request_state(device, KGSL_STATE_SLEEP); |
| /* Have work run in a non-interrupt context. */ |
| queue_work(device->work_queue, &device->idle_check_ws); |
| } |
| } |
| |
| void kgsl_pre_hwaccess(struct kgsl_device *device) |
| { |
| BUG_ON(!mutex_is_locked(&device->mutex)); |
| switch (device->state) { |
| case KGSL_STATE_ACTIVE: |
| return; |
| case KGSL_STATE_NAP: |
| case KGSL_STATE_SLEEP: |
| case KGSL_STATE_SLUMBER: |
| kgsl_pwrctrl_wake(device); |
| break; |
| case KGSL_STATE_SUSPEND: |
| kgsl_check_suspended(device); |
| break; |
| case KGSL_STATE_INIT: |
| case KGSL_STATE_HUNG: |
| case KGSL_STATE_DUMP_AND_RECOVER: |
| if (test_bit(KGSL_PWRFLAGS_CLK_ON, |
| &device->pwrctrl.power_flags)) |
| break; |
| else |
| KGSL_PWR_ERR(device, |
| "hw access while clocks off from state %d\n", |
| device->state); |
| break; |
| default: |
| KGSL_PWR_ERR(device, "hw access while in unknown state %d\n", |
| device->state); |
| break; |
| } |
| } |
| EXPORT_SYMBOL(kgsl_pre_hwaccess); |
| |
| void kgsl_check_suspended(struct kgsl_device *device) |
| { |
| if (device->requested_state == KGSL_STATE_SUSPEND || |
| device->state == KGSL_STATE_SUSPEND) { |
| mutex_unlock(&device->mutex); |
| wait_for_completion(&device->hwaccess_gate); |
| mutex_lock(&device->mutex); |
| } else if (device->state == KGSL_STATE_DUMP_AND_RECOVER) { |
| mutex_unlock(&device->mutex); |
| wait_for_completion(&device->recovery_gate); |
| mutex_lock(&device->mutex); |
| } else if (device->state == KGSL_STATE_SLUMBER) |
| kgsl_pwrctrl_wake(device); |
| } |
| |
| static int |
| _nap(struct kgsl_device *device) |
| { |
| switch (device->state) { |
| case KGSL_STATE_ACTIVE: |
| if (!device->ftbl->isidle(device)) { |
| kgsl_pwrctrl_request_state(device, KGSL_STATE_NONE); |
| return -EBUSY; |
| } |
| kgsl_pwrctrl_irq(device, KGSL_PWRFLAGS_OFF); |
| kgsl_pwrctrl_clk(device, KGSL_PWRFLAGS_OFF, KGSL_STATE_NAP); |
| kgsl_pwrctrl_set_state(device, KGSL_STATE_NAP); |
| case KGSL_STATE_NAP: |
| case KGSL_STATE_SLEEP: |
| case KGSL_STATE_SLUMBER: |
| break; |
| default: |
| kgsl_pwrctrl_request_state(device, KGSL_STATE_NONE); |
| break; |
| } |
| return 0; |
| } |
| |
| static void |
| _sleep_accounting(struct kgsl_device *device) |
| { |
| kgsl_pwrctrl_busy_time(device, false); |
| device->pwrctrl.clk_stats.start = ktime_set(0, 0); |
| device->pwrctrl.time = 0; |
| kgsl_pwrscale_sleep(device); |
| } |
| |
| static int |
| _sleep(struct kgsl_device *device) |
| { |
| struct kgsl_pwrctrl *pwr = &device->pwrctrl; |
| switch (device->state) { |
| case KGSL_STATE_ACTIVE: |
| if (!device->ftbl->isidle(device)) { |
| kgsl_pwrctrl_request_state(device, KGSL_STATE_NONE); |
| return -EBUSY; |
| } |
| /* fall through */ |
| case KGSL_STATE_NAP: |
| kgsl_pwrctrl_irq(device, KGSL_PWRFLAGS_OFF); |
| kgsl_pwrctrl_axi(device, KGSL_PWRFLAGS_OFF); |
| if (pwr->pwrlevels[0].gpu_freq > 0) |
| clk_set_rate(pwr->grp_clks[0], |
| pwr->pwrlevels[pwr->num_pwrlevels - 1]. |
| gpu_freq); |
| _sleep_accounting(device); |
| kgsl_pwrctrl_clk(device, KGSL_PWRFLAGS_OFF, KGSL_STATE_SLEEP); |
| kgsl_pwrctrl_set_state(device, KGSL_STATE_SLEEP); |
| pm_qos_update_request(&device->pm_qos_req_dma, |
| PM_QOS_DEFAULT_VALUE); |
| break; |
| case KGSL_STATE_SLEEP: |
| case KGSL_STATE_SLUMBER: |
| break; |
| default: |
| KGSL_PWR_WARN(device, "unhandled state %s\n", |
| kgsl_pwrstate_to_str(device->state)); |
| break; |
| } |
| return 0; |
| } |
| |
| static int |
| _slumber(struct kgsl_device *device) |
| { |
| switch (device->state) { |
| case KGSL_STATE_ACTIVE: |
| if (!device->ftbl->isidle(device)) { |
| kgsl_pwrctrl_request_state(device, KGSL_STATE_NONE); |
| return -EBUSY; |
| } |
| /* fall through */ |
| case KGSL_STATE_NAP: |
| case KGSL_STATE_SLEEP: |
| del_timer_sync(&device->idle_timer); |
| device->ftbl->suspend_context(device); |
| device->ftbl->stop(device); |
| _sleep_accounting(device); |
| kgsl_pwrctrl_set_state(device, KGSL_STATE_SLUMBER); |
| pm_qos_update_request(&device->pm_qos_req_dma, |
| PM_QOS_DEFAULT_VALUE); |
| break; |
| case KGSL_STATE_SLUMBER: |
| break; |
| default: |
| KGSL_PWR_WARN(device, "unhandled state %s\n", |
| kgsl_pwrstate_to_str(device->state)); |
| break; |
| } |
| return 0; |
| } |
| |
| /******************************************************************/ |
| /* Caller must hold the device mutex. */ |
| int kgsl_pwrctrl_sleep(struct kgsl_device *device) |
| { |
| int status = 0; |
| KGSL_PWR_INFO(device, "sleep device %d\n", device->id); |
| |
| /* Work through the legal state transitions */ |
| switch (device->requested_state) { |
| case KGSL_STATE_NAP: |
| status = _nap(device); |
| break; |
| case KGSL_STATE_SLEEP: |
| status = _sleep(device); |
| break; |
| case KGSL_STATE_SLUMBER: |
| status = _slumber(device); |
| break; |
| default: |
| KGSL_PWR_INFO(device, "bad state request 0x%x\n", |
| device->requested_state); |
| kgsl_pwrctrl_request_state(device, KGSL_STATE_NONE); |
| status = -EINVAL; |
| break; |
| } |
| return status; |
| } |
| EXPORT_SYMBOL(kgsl_pwrctrl_sleep); |
| |
| /******************************************************************/ |
| /* Caller must hold the device mutex. */ |
| void kgsl_pwrctrl_wake(struct kgsl_device *device) |
| { |
| int status; |
| kgsl_pwrctrl_request_state(device, KGSL_STATE_ACTIVE); |
| switch (device->state) { |
| case KGSL_STATE_SLUMBER: |
| status = device->ftbl->start(device, 0); |
| if (status) { |
| kgsl_pwrctrl_request_state(device, KGSL_STATE_NONE); |
| KGSL_DRV_ERR(device, "start failed %d\n", status); |
| break; |
| } |
| /* fall through */ |
| case KGSL_STATE_SLEEP: |
| kgsl_pwrctrl_axi(device, KGSL_PWRFLAGS_ON); |
| kgsl_pwrscale_wake(device); |
| /* fall through */ |
| case KGSL_STATE_NAP: |
| /* Turn on the core clocks */ |
| kgsl_pwrctrl_clk(device, KGSL_PWRFLAGS_ON, KGSL_STATE_ACTIVE); |
| /* Enable state before turning on irq */ |
| kgsl_pwrctrl_set_state(device, KGSL_STATE_ACTIVE); |
| kgsl_pwrctrl_irq(device, KGSL_PWRFLAGS_ON); |
| /* Re-enable HW access */ |
| mod_timer(&device->idle_timer, |
| jiffies + device->pwrctrl.interval_timeout); |
| pm_qos_update_request(&device->pm_qos_req_dma, |
| GPU_SWFI_LATENCY); |
| case KGSL_STATE_ACTIVE: |
| break; |
| default: |
| KGSL_PWR_WARN(device, "unhandled state %s\n", |
| kgsl_pwrstate_to_str(device->state)); |
| kgsl_pwrctrl_request_state(device, KGSL_STATE_NONE); |
| break; |
| } |
| } |
| EXPORT_SYMBOL(kgsl_pwrctrl_wake); |
| |
| void kgsl_pwrctrl_enable(struct kgsl_device *device) |
| { |
| /* Order pwrrail/clk sequence based upon platform */ |
| kgsl_pwrctrl_pwrrail(device, KGSL_PWRFLAGS_ON); |
| kgsl_pwrctrl_clk(device, KGSL_PWRFLAGS_ON, KGSL_STATE_ACTIVE); |
| kgsl_pwrctrl_axi(device, KGSL_PWRFLAGS_ON); |
| } |
| EXPORT_SYMBOL(kgsl_pwrctrl_enable); |
| |
| void kgsl_pwrctrl_disable(struct kgsl_device *device) |
| { |
| /* Order pwrrail/clk sequence based upon platform */ |
| kgsl_pwrctrl_axi(device, KGSL_PWRFLAGS_OFF); |
| kgsl_pwrctrl_clk(device, KGSL_PWRFLAGS_OFF, KGSL_STATE_SLEEP); |
| kgsl_pwrctrl_pwrrail(device, KGSL_PWRFLAGS_OFF); |
| } |
| EXPORT_SYMBOL(kgsl_pwrctrl_disable); |
| |
| void kgsl_pwrctrl_set_state(struct kgsl_device *device, unsigned int state) |
| { |
| trace_kgsl_pwr_set_state(device, state); |
| device->state = state; |
| device->requested_state = KGSL_STATE_NONE; |
| } |
| EXPORT_SYMBOL(kgsl_pwrctrl_set_state); |
| |
| void kgsl_pwrctrl_request_state(struct kgsl_device *device, unsigned int state) |
| { |
| if (state != KGSL_STATE_NONE && state != device->requested_state) |
| trace_kgsl_pwr_request_state(device, state); |
| device->requested_state = state; |
| } |
| EXPORT_SYMBOL(kgsl_pwrctrl_request_state); |
| |
| const char *kgsl_pwrstate_to_str(unsigned int state) |
| { |
| switch (state) { |
| case KGSL_STATE_NONE: |
| return "NONE"; |
| case KGSL_STATE_INIT: |
| return "INIT"; |
| case KGSL_STATE_ACTIVE: |
| return "ACTIVE"; |
| case KGSL_STATE_NAP: |
| return "NAP"; |
| case KGSL_STATE_SLEEP: |
| return "SLEEP"; |
| case KGSL_STATE_SUSPEND: |
| return "SUSPEND"; |
| case KGSL_STATE_HUNG: |
| return "HUNG"; |
| case KGSL_STATE_DUMP_AND_RECOVER: |
| return "DNR"; |
| case KGSL_STATE_SLUMBER: |
| return "SLUMBER"; |
| default: |
| break; |
| } |
| return "UNKNOWN"; |
| } |
| EXPORT_SYMBOL(kgsl_pwrstate_to_str); |
| |