| /* |
| * Texas Instruments' Bluetooth HCILL UART protocol |
| * |
| * HCILL (HCI Low Level) is a Texas Instruments' power management |
| * protocol extension to H4. |
| * |
| * Copyright (C) 2007 Texas Instruments, Inc. |
| * |
| * Written by Ohad Ben-Cohen <ohad@bencohen.org> |
| * |
| * Acknowledgements: |
| * This file is based on hci_h4.c, which was written |
| * by Maxim Krasnyansky and Marcel Holtmann. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 |
| * as published by the Free Software Foundation |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| |
| #include <linux/init.h> |
| #include <linux/sched.h> |
| #include <linux/types.h> |
| #include <linux/fcntl.h> |
| #include <linux/interrupt.h> |
| #include <linux/ptrace.h> |
| #include <linux/poll.h> |
| |
| #include <linux/slab.h> |
| #include <linux/tty.h> |
| #include <linux/errno.h> |
| #include <linux/string.h> |
| #include <linux/signal.h> |
| #include <linux/ioctl.h> |
| #include <linux/skbuff.h> |
| |
| #include <net/bluetooth/bluetooth.h> |
| #include <net/bluetooth/hci_core.h> |
| |
| #include "hci_uart.h" |
| |
| /* HCILL commands */ |
| #define HCILL_GO_TO_SLEEP_IND 0x30 |
| #define HCILL_GO_TO_SLEEP_ACK 0x31 |
| #define HCILL_WAKE_UP_IND 0x32 |
| #define HCILL_WAKE_UP_ACK 0x33 |
| |
| /* HCILL receiver States */ |
| #define HCILL_W4_PACKET_TYPE 0 |
| #define HCILL_W4_EVENT_HDR 1 |
| #define HCILL_W4_ACL_HDR 2 |
| #define HCILL_W4_SCO_HDR 3 |
| #define HCILL_W4_DATA 4 |
| |
| /* HCILL states */ |
| enum hcill_states_e { |
| HCILL_ASLEEP, |
| HCILL_ASLEEP_TO_AWAKE, |
| HCILL_AWAKE, |
| HCILL_AWAKE_TO_ASLEEP |
| }; |
| |
| struct hcill_cmd { |
| u8 cmd; |
| } __attribute__((packed)); |
| |
| struct ll_struct { |
| unsigned long rx_state; |
| unsigned long rx_count; |
| struct sk_buff *rx_skb; |
| struct sk_buff_head txq; |
| spinlock_t hcill_lock; /* HCILL state lock */ |
| unsigned long hcill_state; /* HCILL power state */ |
| struct sk_buff_head tx_wait_q; /* HCILL wait queue */ |
| }; |
| |
| /* |
| * Builds and sends an HCILL command packet. |
| * These are very simple packets with only 1 cmd byte |
| */ |
| static int send_hcill_cmd(u8 cmd, struct hci_uart *hu) |
| { |
| int err = 0; |
| struct sk_buff *skb = NULL; |
| struct ll_struct *ll = hu->priv; |
| struct hcill_cmd *hcill_packet; |
| |
| BT_DBG("hu %p cmd 0x%x", hu, cmd); |
| |
| /* allocate packet */ |
| skb = bt_skb_alloc(1, GFP_ATOMIC); |
| if (!skb) { |
| BT_ERR("cannot allocate memory for HCILL packet"); |
| err = -ENOMEM; |
| goto out; |
| } |
| |
| /* prepare packet */ |
| hcill_packet = (struct hcill_cmd *) skb_put(skb, 1); |
| hcill_packet->cmd = cmd; |
| skb->dev = (void *) hu->hdev; |
| |
| /* send packet */ |
| skb_queue_tail(&ll->txq, skb); |
| out: |
| return err; |
| } |
| |
| /* Initialize protocol */ |
| static int ll_open(struct hci_uart *hu) |
| { |
| struct ll_struct *ll; |
| |
| BT_DBG("hu %p", hu); |
| |
| ll = kzalloc(sizeof(*ll), GFP_ATOMIC); |
| if (!ll) |
| return -ENOMEM; |
| |
| skb_queue_head_init(&ll->txq); |
| skb_queue_head_init(&ll->tx_wait_q); |
| spin_lock_init(&ll->hcill_lock); |
| |
| ll->hcill_state = HCILL_AWAKE; |
| |
| hu->priv = ll; |
| |
| return 0; |
| } |
| |
| /* Flush protocol data */ |
| static int ll_flush(struct hci_uart *hu) |
| { |
| struct ll_struct *ll = hu->priv; |
| |
| BT_DBG("hu %p", hu); |
| |
| skb_queue_purge(&ll->tx_wait_q); |
| skb_queue_purge(&ll->txq); |
| |
| return 0; |
| } |
| |
| /* Close protocol */ |
| static int ll_close(struct hci_uart *hu) |
| { |
| struct ll_struct *ll = hu->priv; |
| |
| BT_DBG("hu %p", hu); |
| |
| skb_queue_purge(&ll->tx_wait_q); |
| skb_queue_purge(&ll->txq); |
| |
| kfree_skb(ll->rx_skb); |
| |
| hu->priv = NULL; |
| |
| kfree(ll); |
| |
| return 0; |
| } |
| |
| /* |
| * internal function, which does common work of the device wake up process: |
| * 1. places all pending packets (waiting in tx_wait_q list) in txq list. |
| * 2. changes internal state to HCILL_AWAKE. |
| * Note: assumes that hcill_lock spinlock is taken, |
| * shouldn't be called otherwise! |
| */ |
| static void __ll_do_awake(struct ll_struct *ll) |
| { |
| struct sk_buff *skb = NULL; |
| |
| while ((skb = skb_dequeue(&ll->tx_wait_q))) |
| skb_queue_tail(&ll->txq, skb); |
| |
| ll->hcill_state = HCILL_AWAKE; |
| } |
| |
| /* |
| * Called upon a wake-up-indication from the device |
| */ |
| static void ll_device_want_to_wakeup(struct hci_uart *hu) |
| { |
| unsigned long flags; |
| struct ll_struct *ll = hu->priv; |
| |
| BT_DBG("hu %p", hu); |
| |
| /* lock hcill state */ |
| spin_lock_irqsave(&ll->hcill_lock, flags); |
| |
| switch (ll->hcill_state) { |
| case HCILL_ASLEEP_TO_AWAKE: |
| /* |
| * This state means that both the host and the BRF chip |
| * have simultaneously sent a wake-up-indication packet. |
| * Traditionaly, in this case, receiving a wake-up-indication |
| * was enough and an additional wake-up-ack wasn't needed. |
| * This has changed with the BRF6350, which does require an |
| * explicit wake-up-ack. Other BRF versions, which do not |
| * require an explicit ack here, do accept it, thus it is |
| * perfectly safe to always send one. |
| */ |
| BT_DBG("dual wake-up-indication"); |
| /* deliberate fall-through - do not add break */ |
| case HCILL_ASLEEP: |
| /* acknowledge device wake up */ |
| if (send_hcill_cmd(HCILL_WAKE_UP_ACK, hu) < 0) { |
| BT_ERR("cannot acknowledge device wake up"); |
| goto out; |
| } |
| break; |
| default: |
| /* any other state is illegal */ |
| BT_ERR("received HCILL_WAKE_UP_IND in state %ld", ll->hcill_state); |
| break; |
| } |
| |
| /* send pending packets and change state to HCILL_AWAKE */ |
| __ll_do_awake(ll); |
| |
| out: |
| spin_unlock_irqrestore(&ll->hcill_lock, flags); |
| |
| /* actually send the packets */ |
| hci_uart_tx_wakeup(hu); |
| } |
| |
| /* |
| * Called upon a sleep-indication from the device |
| */ |
| static void ll_device_want_to_sleep(struct hci_uart *hu) |
| { |
| unsigned long flags; |
| struct ll_struct *ll = hu->priv; |
| |
| BT_DBG("hu %p", hu); |
| |
| /* lock hcill state */ |
| spin_lock_irqsave(&ll->hcill_lock, flags); |
| |
| /* sanity check */ |
| if (ll->hcill_state != HCILL_AWAKE) |
| BT_ERR("ERR: HCILL_GO_TO_SLEEP_IND in state %ld", ll->hcill_state); |
| |
| /* acknowledge device sleep */ |
| if (send_hcill_cmd(HCILL_GO_TO_SLEEP_ACK, hu) < 0) { |
| BT_ERR("cannot acknowledge device sleep"); |
| goto out; |
| } |
| |
| /* update state */ |
| ll->hcill_state = HCILL_ASLEEP; |
| |
| out: |
| spin_unlock_irqrestore(&ll->hcill_lock, flags); |
| |
| /* actually send the sleep ack packet */ |
| hci_uart_tx_wakeup(hu); |
| } |
| |
| /* |
| * Called upon wake-up-acknowledgement from the device |
| */ |
| static void ll_device_woke_up(struct hci_uart *hu) |
| { |
| unsigned long flags; |
| struct ll_struct *ll = hu->priv; |
| |
| BT_DBG("hu %p", hu); |
| |
| /* lock hcill state */ |
| spin_lock_irqsave(&ll->hcill_lock, flags); |
| |
| /* sanity check */ |
| if (ll->hcill_state != HCILL_ASLEEP_TO_AWAKE) |
| BT_ERR("received HCILL_WAKE_UP_ACK in state %ld", ll->hcill_state); |
| |
| /* send pending packets and change state to HCILL_AWAKE */ |
| __ll_do_awake(ll); |
| |
| spin_unlock_irqrestore(&ll->hcill_lock, flags); |
| |
| /* actually send the packets */ |
| hci_uart_tx_wakeup(hu); |
| } |
| |
| /* Enqueue frame for transmittion (padding, crc, etc) */ |
| /* may be called from two simultaneous tasklets */ |
| static int ll_enqueue(struct hci_uart *hu, struct sk_buff *skb) |
| { |
| unsigned long flags = 0; |
| struct ll_struct *ll = hu->priv; |
| |
| BT_DBG("hu %p skb %p", hu, skb); |
| |
| /* Prepend skb with frame type */ |
| memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1); |
| |
| /* lock hcill state */ |
| spin_lock_irqsave(&ll->hcill_lock, flags); |
| |
| /* act according to current state */ |
| switch (ll->hcill_state) { |
| case HCILL_AWAKE: |
| BT_DBG("device awake, sending normally"); |
| skb_queue_tail(&ll->txq, skb); |
| break; |
| case HCILL_ASLEEP: |
| BT_DBG("device asleep, waking up and queueing packet"); |
| /* save packet for later */ |
| skb_queue_tail(&ll->tx_wait_q, skb); |
| /* awake device */ |
| if (send_hcill_cmd(HCILL_WAKE_UP_IND, hu) < 0) { |
| BT_ERR("cannot wake up device"); |
| break; |
| } |
| ll->hcill_state = HCILL_ASLEEP_TO_AWAKE; |
| break; |
| case HCILL_ASLEEP_TO_AWAKE: |
| BT_DBG("device waking up, queueing packet"); |
| /* transient state; just keep packet for later */ |
| skb_queue_tail(&ll->tx_wait_q, skb); |
| break; |
| default: |
| BT_ERR("illegal hcill state: %ld (losing packet)", ll->hcill_state); |
| kfree_skb(skb); |
| break; |
| } |
| |
| spin_unlock_irqrestore(&ll->hcill_lock, flags); |
| |
| return 0; |
| } |
| |
| static inline int ll_check_data_len(struct ll_struct *ll, int len) |
| { |
| register int room = skb_tailroom(ll->rx_skb); |
| |
| BT_DBG("len %d room %d", len, room); |
| |
| if (!len) { |
| hci_recv_frame(ll->rx_skb); |
| } else if (len > room) { |
| BT_ERR("Data length is too large"); |
| kfree_skb(ll->rx_skb); |
| } else { |
| ll->rx_state = HCILL_W4_DATA; |
| ll->rx_count = len; |
| return len; |
| } |
| |
| ll->rx_state = HCILL_W4_PACKET_TYPE; |
| ll->rx_skb = NULL; |
| ll->rx_count = 0; |
| |
| return 0; |
| } |
| |
| /* Recv data */ |
| static int ll_recv(struct hci_uart *hu, void *data, int count) |
| { |
| struct ll_struct *ll = hu->priv; |
| register char *ptr; |
| struct hci_event_hdr *eh; |
| struct hci_acl_hdr *ah; |
| struct hci_sco_hdr *sh; |
| register int len, type, dlen; |
| |
| BT_DBG("hu %p count %d rx_state %ld rx_count %ld", hu, count, ll->rx_state, ll->rx_count); |
| |
| ptr = data; |
| while (count) { |
| if (ll->rx_count) { |
| len = min_t(unsigned int, ll->rx_count, count); |
| memcpy(skb_put(ll->rx_skb, len), ptr, len); |
| ll->rx_count -= len; count -= len; ptr += len; |
| |
| if (ll->rx_count) |
| continue; |
| |
| switch (ll->rx_state) { |
| case HCILL_W4_DATA: |
| BT_DBG("Complete data"); |
| hci_recv_frame(ll->rx_skb); |
| |
| ll->rx_state = HCILL_W4_PACKET_TYPE; |
| ll->rx_skb = NULL; |
| continue; |
| |
| case HCILL_W4_EVENT_HDR: |
| eh = hci_event_hdr(ll->rx_skb); |
| |
| BT_DBG("Event header: evt 0x%2.2x plen %d", eh->evt, eh->plen); |
| |
| ll_check_data_len(ll, eh->plen); |
| continue; |
| |
| case HCILL_W4_ACL_HDR: |
| ah = hci_acl_hdr(ll->rx_skb); |
| dlen = __le16_to_cpu(ah->dlen); |
| |
| BT_DBG("ACL header: dlen %d", dlen); |
| |
| ll_check_data_len(ll, dlen); |
| continue; |
| |
| case HCILL_W4_SCO_HDR: |
| sh = hci_sco_hdr(ll->rx_skb); |
| |
| BT_DBG("SCO header: dlen %d", sh->dlen); |
| |
| ll_check_data_len(ll, sh->dlen); |
| continue; |
| } |
| } |
| |
| /* HCILL_W4_PACKET_TYPE */ |
| switch (*ptr) { |
| case HCI_EVENT_PKT: |
| BT_DBG("Event packet"); |
| ll->rx_state = HCILL_W4_EVENT_HDR; |
| ll->rx_count = HCI_EVENT_HDR_SIZE; |
| type = HCI_EVENT_PKT; |
| break; |
| |
| case HCI_ACLDATA_PKT: |
| BT_DBG("ACL packet"); |
| ll->rx_state = HCILL_W4_ACL_HDR; |
| ll->rx_count = HCI_ACL_HDR_SIZE; |
| type = HCI_ACLDATA_PKT; |
| break; |
| |
| case HCI_SCODATA_PKT: |
| BT_DBG("SCO packet"); |
| ll->rx_state = HCILL_W4_SCO_HDR; |
| ll->rx_count = HCI_SCO_HDR_SIZE; |
| type = HCI_SCODATA_PKT; |
| break; |
| |
| /* HCILL signals */ |
| case HCILL_GO_TO_SLEEP_IND: |
| BT_DBG("HCILL_GO_TO_SLEEP_IND packet"); |
| ll_device_want_to_sleep(hu); |
| ptr++; count--; |
| continue; |
| |
| case HCILL_GO_TO_SLEEP_ACK: |
| /* shouldn't happen */ |
| BT_ERR("received HCILL_GO_TO_SLEEP_ACK (in state %ld)", ll->hcill_state); |
| ptr++; count--; |
| continue; |
| |
| case HCILL_WAKE_UP_IND: |
| BT_DBG("HCILL_WAKE_UP_IND packet"); |
| ll_device_want_to_wakeup(hu); |
| ptr++; count--; |
| continue; |
| |
| case HCILL_WAKE_UP_ACK: |
| BT_DBG("HCILL_WAKE_UP_ACK packet"); |
| ll_device_woke_up(hu); |
| ptr++; count--; |
| continue; |
| |
| default: |
| BT_ERR("Unknown HCI packet type %2.2x", (__u8)*ptr); |
| hu->hdev->stat.err_rx++; |
| ptr++; count--; |
| continue; |
| }; |
| |
| ptr++; count--; |
| |
| /* Allocate packet */ |
| ll->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC); |
| if (!ll->rx_skb) { |
| BT_ERR("Can't allocate mem for new packet"); |
| ll->rx_state = HCILL_W4_PACKET_TYPE; |
| ll->rx_count = 0; |
| return -ENOMEM; |
| } |
| |
| ll->rx_skb->dev = (void *) hu->hdev; |
| bt_cb(ll->rx_skb)->pkt_type = type; |
| } |
| |
| return count; |
| } |
| |
| static struct sk_buff *ll_dequeue(struct hci_uart *hu) |
| { |
| struct ll_struct *ll = hu->priv; |
| return skb_dequeue(&ll->txq); |
| } |
| |
| static struct hci_uart_proto llp = { |
| .id = HCI_UART_LL, |
| .open = ll_open, |
| .close = ll_close, |
| .recv = ll_recv, |
| .enqueue = ll_enqueue, |
| .dequeue = ll_dequeue, |
| .flush = ll_flush, |
| }; |
| |
| int ll_init(void) |
| { |
| int err = hci_uart_register_proto(&llp); |
| |
| if (!err) |
| BT_INFO("HCILL protocol initialized"); |
| else |
| BT_ERR("HCILL protocol registration failed"); |
| |
| return err; |
| } |
| |
| int ll_deinit(void) |
| { |
| return hci_uart_unregister_proto(&llp); |
| } |