| /* |
| * Copyright (c) 2012, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/io.h> |
| #include <linux/iopoll.h> |
| #include <linux/err.h> |
| #include <linux/of.h> |
| |
| #include "peripheral-loader.h" |
| #include "pil-q6v5.h" |
| |
| /* Register Offsets */ |
| #define QDSP6SS_RST_EVB 0x010 |
| #define LPASS_Q6SS_BCR 0x06000 |
| #define LPASS_Q6SS_AHB_LFABIF_CBCR 0x22000 |
| #define LPASS_Q6SS_XO_CBCR 0x26000 |
| #define AXI_HALTREQ 0x0 |
| #define AXI_HALTACK 0x4 |
| #define AXI_IDLE 0x8 |
| |
| #define HALT_ACK_TIMEOUT_US 100000 |
| |
| static void clk_reg_enable(void __iomem *reg) |
| { |
| u32 val; |
| val = readl_relaxed(reg); |
| val |= BIT(0); |
| writel_relaxed(val, reg); |
| } |
| |
| static void clk_reg_disable(void __iomem *reg) |
| { |
| u32 val; |
| val = readl_relaxed(reg); |
| val &= ~BIT(0); |
| writel_relaxed(val, reg); |
| } |
| |
| static int pil_lpass_shutdown(struct pil_desc *pil) |
| { |
| struct q6v5_data *drv = dev_get_drvdata(pil->dev); |
| int ret; |
| u32 status; |
| |
| writel_relaxed(1, drv->axi_halt_base + AXI_HALTREQ); |
| ret = readl_poll_timeout(drv->axi_halt_base + AXI_HALTACK, |
| status, status, 50, HALT_ACK_TIMEOUT_US); |
| if (ret) |
| dev_err(pil->dev, "Port halt timeout\n"); |
| else if (!readl_relaxed(drv->axi_halt_base + AXI_IDLE)) |
| dev_err(pil->dev, "Port halt failed\n"); |
| writel_relaxed(0, drv->axi_halt_base + AXI_HALTREQ); |
| |
| /* Make sure Q6 registers are accessible */ |
| writel_relaxed(0, drv->clk_base + LPASS_Q6SS_BCR); |
| clk_reg_enable(drv->clk_base + LPASS_Q6SS_AHB_LFABIF_CBCR); |
| mb(); |
| |
| pil_q6v5_shutdown(pil); |
| |
| /* Disable clocks and assert subsystem resets. */ |
| clk_reg_disable(drv->clk_base + LPASS_Q6SS_AHB_LFABIF_CBCR); |
| clk_reg_disable(drv->clk_base + LPASS_Q6SS_XO_CBCR); |
| writel_relaxed(1, drv->clk_base + LPASS_Q6SS_BCR); |
| |
| return 0; |
| } |
| |
| static int pil_lpass_reset(struct pil_desc *pil) |
| { |
| struct q6v5_data *drv = dev_get_drvdata(pil->dev); |
| |
| /* |
| * Bring subsystem out of reset and enable required |
| * regulators and clocks. |
| */ |
| writel_relaxed(0, drv->clk_base + LPASS_Q6SS_BCR); |
| clk_reg_enable(drv->clk_base + LPASS_Q6SS_XO_CBCR); |
| clk_reg_enable(drv->clk_base + LPASS_Q6SS_AHB_LFABIF_CBCR); |
| mb(); |
| |
| /* Program Image Address */ |
| writel_relaxed(((drv->start_addr >> 4) & 0x0FFFFFF0), |
| drv->reg_base + QDSP6SS_RST_EVB); |
| |
| return pil_q6v5_reset(pil); |
| } |
| |
| static struct pil_reset_ops pil_lpass_ops = { |
| .init_image = pil_q6v5_init_image, |
| .proxy_vote = pil_q6v5_make_proxy_votes, |
| .proxy_unvote = pil_q6v5_remove_proxy_votes, |
| .auth_and_reset = pil_lpass_reset, |
| .shutdown = pil_lpass_shutdown, |
| }; |
| |
| static int __devinit pil_lpass_driver_probe(struct platform_device *pdev) |
| { |
| struct q6v5_data *drv; |
| struct pil_desc *desc; |
| struct resource *res; |
| |
| desc = pil_q6v5_init(pdev); |
| if (IS_ERR(desc)) |
| return PTR_ERR(desc); |
| |
| drv = platform_get_drvdata(pdev); |
| if (drv == NULL) |
| return -ENODEV; |
| |
| desc->ops = &pil_lpass_ops; |
| desc->owner = THIS_MODULE; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 2); |
| drv->axi_halt_base = devm_ioremap(&pdev->dev, res->start, |
| resource_size(res)); |
| if (!drv->axi_halt_base) |
| return -ENOMEM; |
| |
| drv->pil = msm_pil_register(desc); |
| if (IS_ERR(drv->pil)) |
| return PTR_ERR(drv->pil); |
| |
| return 0; |
| } |
| |
| static int __devexit pil_lpass_driver_exit(struct platform_device *pdev) |
| { |
| struct q6v5_data *drv = platform_get_drvdata(pdev); |
| msm_pil_unregister(drv->pil); |
| return 0; |
| } |
| |
| static struct of_device_id lpass_match_table[] = { |
| { .compatible = "qcom,pil-q6v5-lpass" }, |
| {} |
| }; |
| |
| static struct platform_driver pil_lpass_driver = { |
| .probe = pil_lpass_driver_probe, |
| .remove = __devexit_p(pil_lpass_driver_exit), |
| .driver = { |
| .name = "pil-q6v5-lpass", |
| .of_match_table = lpass_match_table, |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init pil_lpass_init(void) |
| { |
| return platform_driver_register(&pil_lpass_driver); |
| } |
| module_init(pil_lpass_init); |
| |
| static void __exit pil_lpass_exit(void) |
| { |
| platform_driver_unregister(&pil_lpass_driver); |
| } |
| module_exit(pil_lpass_exit); |
| |
| MODULE_DESCRIPTION("Support for booting low-power audio subsystems with QDSP6v5 (Hexagon) processors"); |
| MODULE_LICENSE("GPL v2"); |