| /* |
| * Lowlevel hardware stuff for the MIPS based Cobalt microservers. |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 1997 Cobalt Microserver |
| * Copyright (C) 1997, 2003 Ralf Baechle |
| * Copyright (C) 2001, 2002, 2003 Liam Davies (ldavies@agile.tv) |
| */ |
| #ifndef __ASM_COBALT_H |
| #define __ASM_COBALT_H |
| |
| /* |
| * i8259 legacy interrupts used on Cobalt: |
| * |
| * 8 - RTC |
| * 9 - PCI |
| * 14 - IDE0 |
| * 15 - IDE1 |
| */ |
| #define COBALT_QUBE_SLOT_IRQ 9 |
| |
| /* |
| * CPU IRQs are 16 ... 23 |
| */ |
| #define COBALT_CPU_IRQ 16 |
| |
| #define COBALT_GALILEO_IRQ (COBALT_CPU_IRQ + 2) |
| #define COBALT_SCC_IRQ (COBALT_CPU_IRQ + 3) /* pre-production has 85C30 */ |
| #define COBALT_RAQ_SCSI_IRQ (COBALT_CPU_IRQ + 3) |
| #define COBALT_ETH0_IRQ (COBALT_CPU_IRQ + 3) |
| #define COBALT_QUBE1_ETH0_IRQ (COBALT_CPU_IRQ + 4) |
| #define COBALT_ETH1_IRQ (COBALT_CPU_IRQ + 4) |
| #define COBALT_SERIAL_IRQ (COBALT_CPU_IRQ + 5) |
| #define COBALT_SCSI_IRQ (COBALT_CPU_IRQ + 5) |
| #define COBALT_VIA_IRQ (COBALT_CPU_IRQ + 6) /* Chained to VIA ISA bridge */ |
| |
| /* |
| * PCI configuration space manifest constants. These are wired into |
| * the board layout according to the PCI spec to enable the software |
| * to probe the hardware configuration space in a well defined manner. |
| * |
| * The PCI_DEVSHFT() macro transforms these values into numbers |
| * suitable for passing as the dev parameter to the various |
| * pcibios_read/write_config routines. |
| */ |
| #define COBALT_PCICONF_CPU 0x06 |
| #define COBALT_PCICONF_ETH0 0x07 |
| #define COBALT_PCICONF_RAQSCSI 0x08 |
| #define COBALT_PCICONF_VIA 0x09 |
| #define COBALT_PCICONF_PCISLOT 0x0A |
| #define COBALT_PCICONF_ETH1 0x0C |
| |
| |
| /* |
| * The Cobalt board id information. The boards have an ID number wired |
| * into the VIA that is available in the high nibble of register 94. |
| * This register is available in the VIA configuration space through the |
| * interface routines qube_pcibios_read/write_config. See cobalt/pci.c |
| */ |
| #define VIA_COBALT_BRD_ID_REG 0x94 |
| #define VIA_COBALT_BRD_REG_to_ID(reg) ((unsigned char) (reg) >> 4) |
| #define COBALT_BRD_ID_QUBE1 0x3 |
| #define COBALT_BRD_ID_RAQ1 0x4 |
| #define COBALT_BRD_ID_QUBE2 0x5 |
| #define COBALT_BRD_ID_RAQ2 0x6 |
| |
| #define PCI_CFG_SET(devfn,where) \ |
| GT_WRITE(GT_PCI0_CFGADDR_OFS, (0x80000000 | (PCI_SLOT (devfn) << 11) | \ |
| (PCI_FUNC (devfn) << 8) | (where))) |
| |
| #define COBALT_LED_PORT (*(volatile unsigned char *) CKSEG1ADDR(0x1c000000)) |
| # define COBALT_LED_BAR_LEFT (1 << 0) /* Qube */ |
| # define COBALT_LED_BAR_RIGHT (1 << 1) /* Qube */ |
| # define COBALT_LED_WEB (1 << 2) /* RaQ */ |
| # define COBALT_LED_POWER_OFF (1 << 3) /* RaQ */ |
| # define COBALT_LED_RESET 0x0f |
| |
| #define COBALT_KEY_PORT ((~*(volatile unsigned int *) CKSEG1ADDR(0x1d000000) >> 24) & COBALT_KEY_MASK) |
| # define COBALT_KEY_CLEAR (1 << 1) |
| # define COBALT_KEY_LEFT (1 << 2) |
| # define COBALT_KEY_UP (1 << 3) |
| # define COBALT_KEY_DOWN (1 << 4) |
| # define COBALT_KEY_RIGHT (1 << 5) |
| # define COBALT_KEY_ENTER (1 << 6) |
| # define COBALT_KEY_SELECT (1 << 7) |
| # define COBALT_KEY_MASK 0xfe |
| |
| #define COBALT_UART ((volatile unsigned char *) CKSEG1ADDR(0x1c800000)) |
| |
| #endif /* __ASM_COBALT_H */ |