| /* |
| * processor_perflib.c - ACPI Processor P-States Library ($Revision: 71 $) |
| * |
| * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com> |
| * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> |
| * Copyright (C) 2004 Dominik Brodowski <linux@brodo.de> |
| * Copyright (C) 2004 Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> |
| * - Added processor hotplug support |
| * |
| * |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or (at |
| * your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/cpufreq.h> |
| |
| #ifdef CONFIG_X86_ACPI_CPUFREQ_PROC_INTF |
| #include <linux/proc_fs.h> |
| #include <linux/seq_file.h> |
| #include <linux/mutex.h> |
| |
| #include <asm/uaccess.h> |
| #endif |
| |
| #include <acpi/acpi_bus.h> |
| #include <acpi/processor.h> |
| |
| #define ACPI_PROCESSOR_COMPONENT 0x01000000 |
| #define ACPI_PROCESSOR_CLASS "processor" |
| #define ACPI_PROCESSOR_DRIVER_NAME "ACPI Processor Driver" |
| #define ACPI_PROCESSOR_FILE_PERFORMANCE "performance" |
| #define _COMPONENT ACPI_PROCESSOR_COMPONENT |
| ACPI_MODULE_NAME("acpi_processor") |
| |
| static DEFINE_MUTEX(performance_mutex); |
| |
| /* |
| * _PPC support is implemented as a CPUfreq policy notifier: |
| * This means each time a CPUfreq driver registered also with |
| * the ACPI core is asked to change the speed policy, the maximum |
| * value is adjusted so that it is within the platform limit. |
| * |
| * Also, when a new platform limit value is detected, the CPUfreq |
| * policy is adjusted accordingly. |
| */ |
| |
| #define PPC_REGISTERED 1 |
| #define PPC_IN_USE 2 |
| |
| static int acpi_processor_ppc_status = 0; |
| |
| static int acpi_processor_ppc_notifier(struct notifier_block *nb, |
| unsigned long event, void *data) |
| { |
| struct cpufreq_policy *policy = data; |
| struct acpi_processor *pr; |
| unsigned int ppc = 0; |
| |
| mutex_lock(&performance_mutex); |
| |
| if (event != CPUFREQ_INCOMPATIBLE) |
| goto out; |
| |
| pr = processors[policy->cpu]; |
| if (!pr || !pr->performance) |
| goto out; |
| |
| ppc = (unsigned int)pr->performance_platform_limit; |
| |
| if (ppc >= pr->performance->state_count) |
| goto out; |
| |
| cpufreq_verify_within_limits(policy, 0, |
| pr->performance->states[ppc]. |
| core_frequency * 1000); |
| |
| out: |
| mutex_unlock(&performance_mutex); |
| |
| return 0; |
| } |
| |
| static struct notifier_block acpi_ppc_notifier_block = { |
| .notifier_call = acpi_processor_ppc_notifier, |
| }; |
| |
| static int acpi_processor_get_platform_limit(struct acpi_processor *pr) |
| { |
| acpi_status status = 0; |
| unsigned long ppc = 0; |
| |
| |
| if (!pr) |
| return -EINVAL; |
| |
| /* |
| * _PPC indicates the maximum state currently supported by the platform |
| * (e.g. 0 = states 0..n; 1 = states 1..n; etc. |
| */ |
| status = acpi_evaluate_integer(pr->handle, "_PPC", NULL, &ppc); |
| |
| if (status != AE_NOT_FOUND) |
| acpi_processor_ppc_status |= PPC_IN_USE; |
| |
| if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { |
| ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PPC")); |
| return -ENODEV; |
| } |
| |
| pr->performance_platform_limit = (int)ppc; |
| |
| return 0; |
| } |
| |
| int acpi_processor_ppc_has_changed(struct acpi_processor *pr) |
| { |
| int ret = acpi_processor_get_platform_limit(pr); |
| if (ret < 0) |
| return (ret); |
| else |
| return cpufreq_update_policy(pr->id); |
| } |
| |
| void acpi_processor_ppc_init(void) |
| { |
| if (!cpufreq_register_notifier |
| (&acpi_ppc_notifier_block, CPUFREQ_POLICY_NOTIFIER)) |
| acpi_processor_ppc_status |= PPC_REGISTERED; |
| else |
| printk(KERN_DEBUG |
| "Warning: Processor Platform Limit not supported.\n"); |
| } |
| |
| void acpi_processor_ppc_exit(void) |
| { |
| if (acpi_processor_ppc_status & PPC_REGISTERED) |
| cpufreq_unregister_notifier(&acpi_ppc_notifier_block, |
| CPUFREQ_POLICY_NOTIFIER); |
| |
| acpi_processor_ppc_status &= ~PPC_REGISTERED; |
| } |
| |
| static int acpi_processor_get_performance_control(struct acpi_processor *pr) |
| { |
| int result = 0; |
| acpi_status status = 0; |
| struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; |
| union acpi_object *pct = NULL; |
| union acpi_object obj = { 0 }; |
| |
| |
| status = acpi_evaluate_object(pr->handle, "_PCT", NULL, &buffer); |
| if (ACPI_FAILURE(status)) { |
| ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PCT")); |
| return -ENODEV; |
| } |
| |
| pct = (union acpi_object *)buffer.pointer; |
| if (!pct || (pct->type != ACPI_TYPE_PACKAGE) |
| || (pct->package.count != 2)) { |
| printk(KERN_ERR PREFIX "Invalid _PCT data\n"); |
| result = -EFAULT; |
| goto end; |
| } |
| |
| /* |
| * control_register |
| */ |
| |
| obj = pct->package.elements[0]; |
| |
| if ((obj.type != ACPI_TYPE_BUFFER) |
| || (obj.buffer.length < sizeof(struct acpi_pct_register)) |
| || (obj.buffer.pointer == NULL)) { |
| printk(KERN_ERR PREFIX "Invalid _PCT data (control_register)\n"); |
| result = -EFAULT; |
| goto end; |
| } |
| memcpy(&pr->performance->control_register, obj.buffer.pointer, |
| sizeof(struct acpi_pct_register)); |
| |
| /* |
| * status_register |
| */ |
| |
| obj = pct->package.elements[1]; |
| |
| if ((obj.type != ACPI_TYPE_BUFFER) |
| || (obj.buffer.length < sizeof(struct acpi_pct_register)) |
| || (obj.buffer.pointer == NULL)) { |
| printk(KERN_ERR PREFIX "Invalid _PCT data (status_register)\n"); |
| result = -EFAULT; |
| goto end; |
| } |
| |
| memcpy(&pr->performance->status_register, obj.buffer.pointer, |
| sizeof(struct acpi_pct_register)); |
| |
| end: |
| kfree(buffer.pointer); |
| |
| return result; |
| } |
| |
| static int acpi_processor_get_performance_states(struct acpi_processor *pr) |
| { |
| int result = 0; |
| acpi_status status = AE_OK; |
| struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; |
| struct acpi_buffer format = { sizeof("NNNNNN"), "NNNNNN" }; |
| struct acpi_buffer state = { 0, NULL }; |
| union acpi_object *pss = NULL; |
| int i; |
| |
| |
| status = acpi_evaluate_object(pr->handle, "_PSS", NULL, &buffer); |
| if (ACPI_FAILURE(status)) { |
| ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PSS")); |
| return -ENODEV; |
| } |
| |
| pss = (union acpi_object *)buffer.pointer; |
| if (!pss || (pss->type != ACPI_TYPE_PACKAGE)) { |
| printk(KERN_ERR PREFIX "Invalid _PSS data\n"); |
| result = -EFAULT; |
| goto end; |
| } |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found %d performance states\n", |
| pss->package.count)); |
| |
| pr->performance->state_count = pss->package.count; |
| pr->performance->states = |
| kmalloc(sizeof(struct acpi_processor_px) * pss->package.count, |
| GFP_KERNEL); |
| if (!pr->performance->states) { |
| result = -ENOMEM; |
| goto end; |
| } |
| |
| for (i = 0; i < pr->performance->state_count; i++) { |
| |
| struct acpi_processor_px *px = &(pr->performance->states[i]); |
| |
| state.length = sizeof(struct acpi_processor_px); |
| state.pointer = px; |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Extracting state %d\n", i)); |
| |
| status = acpi_extract_package(&(pss->package.elements[i]), |
| &format, &state); |
| if (ACPI_FAILURE(status)) { |
| ACPI_EXCEPTION((AE_INFO, status, "Invalid _PSS data")); |
| result = -EFAULT; |
| kfree(pr->performance->states); |
| goto end; |
| } |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, |
| "State [%d]: core_frequency[%d] power[%d] transition_latency[%d] bus_master_latency[%d] control[0x%x] status[0x%x]\n", |
| i, |
| (u32) px->core_frequency, |
| (u32) px->power, |
| (u32) px->transition_latency, |
| (u32) px->bus_master_latency, |
| (u32) px->control, (u32) px->status)); |
| |
| if (!px->core_frequency) { |
| printk(KERN_ERR PREFIX |
| "Invalid _PSS data: freq is zero\n"); |
| result = -EFAULT; |
| kfree(pr->performance->states); |
| goto end; |
| } |
| } |
| |
| end: |
| kfree(buffer.pointer); |
| |
| return result; |
| } |
| |
| static int acpi_processor_get_performance_info(struct acpi_processor *pr) |
| { |
| int result = 0; |
| acpi_status status = AE_OK; |
| acpi_handle handle = NULL; |
| |
| |
| if (!pr || !pr->performance || !pr->handle) |
| return -EINVAL; |
| |
| status = acpi_get_handle(pr->handle, "_PCT", &handle); |
| if (ACPI_FAILURE(status)) { |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, |
| "ACPI-based processor performance control unavailable\n")); |
| return -ENODEV; |
| } |
| |
| result = acpi_processor_get_performance_control(pr); |
| if (result) |
| return result; |
| |
| result = acpi_processor_get_performance_states(pr); |
| if (result) |
| return result; |
| |
| result = acpi_processor_get_platform_limit(pr); |
| if (result) |
| return result; |
| |
| return 0; |
| } |
| |
| int acpi_processor_notify_smm(struct module *calling_module) |
| { |
| acpi_status status; |
| static int is_done = 0; |
| |
| |
| if (!(acpi_processor_ppc_status & PPC_REGISTERED)) |
| return -EBUSY; |
| |
| if (!try_module_get(calling_module)) |
| return -EINVAL; |
| |
| /* is_done is set to negative if an error occured, |
| * and to postitive if _no_ error occured, but SMM |
| * was already notified. This avoids double notification |
| * which might lead to unexpected results... |
| */ |
| if (is_done > 0) { |
| module_put(calling_module); |
| return 0; |
| } else if (is_done < 0) { |
| module_put(calling_module); |
| return is_done; |
| } |
| |
| is_done = -EIO; |
| |
| /* Can't write pstate_cnt to smi_cmd if either value is zero */ |
| if ((!acpi_fadt.smi_cmd) || (!acpi_fadt.pstate_cnt)) { |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No SMI port or pstate_cnt\n")); |
| module_put(calling_module); |
| return 0; |
| } |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, |
| "Writing pstate_cnt [0x%x] to smi_cmd [0x%x]\n", |
| acpi_fadt.pstate_cnt, acpi_fadt.smi_cmd)); |
| |
| /* FADT v1 doesn't support pstate_cnt, many BIOS vendors use |
| * it anyway, so we need to support it... */ |
| if (acpi_fadt_is_v1) { |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, |
| "Using v1.0 FADT reserved value for pstate_cnt\n")); |
| } |
| |
| status = acpi_os_write_port(acpi_fadt.smi_cmd, |
| (u32) acpi_fadt.pstate_cnt, 8); |
| if (ACPI_FAILURE(status)) { |
| ACPI_EXCEPTION((AE_INFO, status, |
| "Failed to write pstate_cnt [0x%x] to " |
| "smi_cmd [0x%x]", acpi_fadt.pstate_cnt, |
| acpi_fadt.smi_cmd)); |
| module_put(calling_module); |
| return status; |
| } |
| |
| /* Success. If there's no _PPC, we need to fear nothing, so |
| * we can allow the cpufreq driver to be rmmod'ed. */ |
| is_done = 1; |
| |
| if (!(acpi_processor_ppc_status & PPC_IN_USE)) |
| module_put(calling_module); |
| |
| return 0; |
| } |
| |
| EXPORT_SYMBOL(acpi_processor_notify_smm); |
| |
| #ifdef CONFIG_X86_ACPI_CPUFREQ_PROC_INTF |
| /* /proc/acpi/processor/../performance interface (DEPRECATED) */ |
| |
| static int acpi_processor_perf_open_fs(struct inode *inode, struct file *file); |
| static struct file_operations acpi_processor_perf_fops = { |
| .open = acpi_processor_perf_open_fs, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| |
| static int acpi_processor_perf_seq_show(struct seq_file *seq, void *offset) |
| { |
| struct acpi_processor *pr = (struct acpi_processor *)seq->private; |
| int i; |
| |
| |
| if (!pr) |
| goto end; |
| |
| if (!pr->performance) { |
| seq_puts(seq, "<not supported>\n"); |
| goto end; |
| } |
| |
| seq_printf(seq, "state count: %d\n" |
| "active state: P%d\n", |
| pr->performance->state_count, pr->performance->state); |
| |
| seq_puts(seq, "states:\n"); |
| for (i = 0; i < pr->performance->state_count; i++) |
| seq_printf(seq, |
| " %cP%d: %d MHz, %d mW, %d uS\n", |
| (i == pr->performance->state ? '*' : ' '), i, |
| (u32) pr->performance->states[i].core_frequency, |
| (u32) pr->performance->states[i].power, |
| (u32) pr->performance->states[i].transition_latency); |
| |
| end: |
| return 0; |
| } |
| |
| static int acpi_processor_perf_open_fs(struct inode *inode, struct file *file) |
| { |
| return single_open(file, acpi_processor_perf_seq_show, |
| PDE(inode)->data); |
| } |
| |
| static ssize_t |
| acpi_processor_write_performance(struct file *file, |
| const char __user * buffer, |
| size_t count, loff_t * data) |
| { |
| int result = 0; |
| struct seq_file *m = (struct seq_file *)file->private_data; |
| struct acpi_processor *pr = (struct acpi_processor *)m->private; |
| struct acpi_processor_performance *perf; |
| char state_string[12] = { '\0' }; |
| unsigned int new_state = 0; |
| struct cpufreq_policy policy; |
| |
| |
| if (!pr || (count > sizeof(state_string) - 1)) |
| return -EINVAL; |
| |
| perf = pr->performance; |
| if (!perf) |
| return -EINVAL; |
| |
| if (copy_from_user(state_string, buffer, count)) |
| return -EFAULT; |
| |
| state_string[count] = '\0'; |
| new_state = simple_strtoul(state_string, NULL, 0); |
| |
| if (new_state >= perf->state_count) |
| return -EINVAL; |
| |
| cpufreq_get_policy(&policy, pr->id); |
| |
| policy.cpu = pr->id; |
| policy.min = perf->states[new_state].core_frequency * 1000; |
| policy.max = perf->states[new_state].core_frequency * 1000; |
| |
| result = cpufreq_set_policy(&policy); |
| if (result) |
| return result; |
| |
| return count; |
| } |
| |
| static void acpi_cpufreq_add_file(struct acpi_processor *pr) |
| { |
| struct proc_dir_entry *entry = NULL; |
| struct acpi_device *device = NULL; |
| |
| |
| if (acpi_bus_get_device(pr->handle, &device)) |
| return; |
| |
| /* add file 'performance' [R/W] */ |
| entry = create_proc_entry(ACPI_PROCESSOR_FILE_PERFORMANCE, |
| S_IFREG | S_IRUGO | S_IWUSR, |
| acpi_device_dir(device)); |
| if (entry){ |
| acpi_processor_perf_fops.write = acpi_processor_write_performance; |
| entry->proc_fops = &acpi_processor_perf_fops; |
| entry->data = acpi_driver_data(device); |
| entry->owner = THIS_MODULE; |
| } |
| return; |
| } |
| |
| static void acpi_cpufreq_remove_file(struct acpi_processor *pr) |
| { |
| struct acpi_device *device = NULL; |
| |
| |
| if (acpi_bus_get_device(pr->handle, &device)) |
| return; |
| |
| /* remove file 'performance' */ |
| remove_proc_entry(ACPI_PROCESSOR_FILE_PERFORMANCE, |
| acpi_device_dir(device)); |
| |
| return; |
| } |
| |
| #else |
| static void acpi_cpufreq_add_file(struct acpi_processor *pr) |
| { |
| return; |
| } |
| static void acpi_cpufreq_remove_file(struct acpi_processor *pr) |
| { |
| return; |
| } |
| #endif /* CONFIG_X86_ACPI_CPUFREQ_PROC_INTF */ |
| |
| static int acpi_processor_get_psd(struct acpi_processor *pr) |
| { |
| int result = 0; |
| acpi_status status = AE_OK; |
| struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; |
| struct acpi_buffer format = {sizeof("NNNNN"), "NNNNN"}; |
| struct acpi_buffer state = {0, NULL}; |
| union acpi_object *psd = NULL; |
| struct acpi_psd_package *pdomain; |
| |
| status = acpi_evaluate_object(pr->handle, "_PSD", NULL, &buffer); |
| if (ACPI_FAILURE(status)) { |
| return -ENODEV; |
| } |
| |
| psd = (union acpi_object *) buffer.pointer; |
| if (!psd || (psd->type != ACPI_TYPE_PACKAGE)) { |
| ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid _PSD data\n")); |
| result = -EFAULT; |
| goto end; |
| } |
| |
| if (psd->package.count != 1) { |
| ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid _PSD data\n")); |
| result = -EFAULT; |
| goto end; |
| } |
| |
| pdomain = &(pr->performance->domain_info); |
| |
| state.length = sizeof(struct acpi_psd_package); |
| state.pointer = pdomain; |
| |
| status = acpi_extract_package(&(psd->package.elements[0]), |
| &format, &state); |
| if (ACPI_FAILURE(status)) { |
| ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid _PSD data\n")); |
| result = -EFAULT; |
| goto end; |
| } |
| |
| if (pdomain->num_entries != ACPI_PSD_REV0_ENTRIES) { |
| ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Unknown _PSD:num_entries\n")); |
| result = -EFAULT; |
| goto end; |
| } |
| |
| if (pdomain->revision != ACPI_PSD_REV0_REVISION) { |
| ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Unknown _PSD:revision\n")); |
| result = -EFAULT; |
| goto end; |
| } |
| |
| end: |
| kfree(buffer.pointer); |
| return result; |
| } |
| |
| int acpi_processor_preregister_performance( |
| struct acpi_processor_performance **performance) |
| { |
| int count, count_target; |
| int retval = 0; |
| unsigned int i, j; |
| cpumask_t covered_cpus; |
| struct acpi_processor *pr; |
| struct acpi_psd_package *pdomain; |
| struct acpi_processor *match_pr; |
| struct acpi_psd_package *match_pdomain; |
| |
| mutex_lock(&performance_mutex); |
| |
| retval = 0; |
| |
| /* Call _PSD for all CPUs */ |
| for_each_possible_cpu(i) { |
| pr = processors[i]; |
| if (!pr) { |
| /* Look only at processors in ACPI namespace */ |
| continue; |
| } |
| |
| if (pr->performance) { |
| retval = -EBUSY; |
| continue; |
| } |
| |
| if (!performance || !performance[i]) { |
| retval = -EINVAL; |
| continue; |
| } |
| |
| pr->performance = performance[i]; |
| cpu_set(i, pr->performance->shared_cpu_map); |
| if (acpi_processor_get_psd(pr)) { |
| retval = -EINVAL; |
| continue; |
| } |
| } |
| if (retval) |
| goto err_ret; |
| |
| /* |
| * Now that we have _PSD data from all CPUs, lets setup P-state |
| * domain info. |
| */ |
| for_each_possible_cpu(i) { |
| pr = processors[i]; |
| if (!pr) |
| continue; |
| |
| /* Basic validity check for domain info */ |
| pdomain = &(pr->performance->domain_info); |
| if ((pdomain->revision != ACPI_PSD_REV0_REVISION) || |
| (pdomain->num_entries != ACPI_PSD_REV0_ENTRIES)) { |
| retval = -EINVAL; |
| goto err_ret; |
| } |
| if (pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ALL && |
| pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ANY && |
| pdomain->coord_type != DOMAIN_COORD_TYPE_HW_ALL) { |
| retval = -EINVAL; |
| goto err_ret; |
| } |
| } |
| |
| cpus_clear(covered_cpus); |
| for_each_possible_cpu(i) { |
| pr = processors[i]; |
| if (!pr) |
| continue; |
| |
| if (cpu_isset(i, covered_cpus)) |
| continue; |
| |
| pdomain = &(pr->performance->domain_info); |
| cpu_set(i, pr->performance->shared_cpu_map); |
| cpu_set(i, covered_cpus); |
| if (pdomain->num_processors <= 1) |
| continue; |
| |
| /* Validate the Domain info */ |
| count_target = pdomain->num_processors; |
| count = 1; |
| if (pdomain->coord_type == DOMAIN_COORD_TYPE_SW_ALL) |
| pr->performance->shared_type = CPUFREQ_SHARED_TYPE_ALL; |
| else if (pdomain->coord_type == DOMAIN_COORD_TYPE_HW_ALL) |
| pr->performance->shared_type = CPUFREQ_SHARED_TYPE_HW; |
| else if (pdomain->coord_type == DOMAIN_COORD_TYPE_SW_ANY) |
| pr->performance->shared_type = CPUFREQ_SHARED_TYPE_ANY; |
| |
| for_each_possible_cpu(j) { |
| if (i == j) |
| continue; |
| |
| match_pr = processors[j]; |
| if (!match_pr) |
| continue; |
| |
| match_pdomain = &(match_pr->performance->domain_info); |
| if (match_pdomain->domain != pdomain->domain) |
| continue; |
| |
| /* Here i and j are in the same domain */ |
| |
| if (match_pdomain->num_processors != count_target) { |
| retval = -EINVAL; |
| goto err_ret; |
| } |
| |
| if (pdomain->coord_type != match_pdomain->coord_type) { |
| retval = -EINVAL; |
| goto err_ret; |
| } |
| |
| cpu_set(j, covered_cpus); |
| cpu_set(j, pr->performance->shared_cpu_map); |
| count++; |
| } |
| |
| for_each_possible_cpu(j) { |
| if (i == j) |
| continue; |
| |
| match_pr = processors[j]; |
| if (!match_pr) |
| continue; |
| |
| match_pdomain = &(match_pr->performance->domain_info); |
| if (match_pdomain->domain != pdomain->domain) |
| continue; |
| |
| match_pr->performance->shared_type = |
| pr->performance->shared_type; |
| match_pr->performance->shared_cpu_map = |
| pr->performance->shared_cpu_map; |
| } |
| } |
| |
| err_ret: |
| if (retval) { |
| ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error while parsing _PSD domain information. Assuming no coordination\n")); |
| } |
| |
| for_each_possible_cpu(i) { |
| pr = processors[i]; |
| if (!pr || !pr->performance) |
| continue; |
| |
| /* Assume no coordination on any error parsing domain info */ |
| if (retval) { |
| cpus_clear(pr->performance->shared_cpu_map); |
| cpu_set(i, pr->performance->shared_cpu_map); |
| pr->performance->shared_type = CPUFREQ_SHARED_TYPE_ALL; |
| } |
| pr->performance = NULL; /* Will be set for real in register */ |
| } |
| |
| mutex_unlock(&performance_mutex); |
| return retval; |
| } |
| EXPORT_SYMBOL(acpi_processor_preregister_performance); |
| |
| |
| int |
| acpi_processor_register_performance(struct acpi_processor_performance |
| *performance, unsigned int cpu) |
| { |
| struct acpi_processor *pr; |
| |
| |
| if (!(acpi_processor_ppc_status & PPC_REGISTERED)) |
| return -EINVAL; |
| |
| mutex_lock(&performance_mutex); |
| |
| pr = processors[cpu]; |
| if (!pr) { |
| mutex_unlock(&performance_mutex); |
| return -ENODEV; |
| } |
| |
| if (pr->performance) { |
| mutex_unlock(&performance_mutex); |
| return -EBUSY; |
| } |
| |
| WARN_ON(!performance); |
| |
| pr->performance = performance; |
| |
| if (acpi_processor_get_performance_info(pr)) { |
| pr->performance = NULL; |
| mutex_unlock(&performance_mutex); |
| return -EIO; |
| } |
| |
| acpi_cpufreq_add_file(pr); |
| |
| mutex_unlock(&performance_mutex); |
| return 0; |
| } |
| |
| EXPORT_SYMBOL(acpi_processor_register_performance); |
| |
| void |
| acpi_processor_unregister_performance(struct acpi_processor_performance |
| *performance, unsigned int cpu) |
| { |
| struct acpi_processor *pr; |
| |
| |
| mutex_lock(&performance_mutex); |
| |
| pr = processors[cpu]; |
| if (!pr) { |
| mutex_unlock(&performance_mutex); |
| return; |
| } |
| |
| if (pr->performance) |
| kfree(pr->performance->states); |
| pr->performance = NULL; |
| |
| acpi_cpufreq_remove_file(pr); |
| |
| mutex_unlock(&performance_mutex); |
| |
| return; |
| } |
| |
| EXPORT_SYMBOL(acpi_processor_unregister_performance); |