| /* |
| * Linux/drivers/video/retz3fb.c -- RetinaZ3 frame buffer device |
| * |
| * Copyright (C) 1997 Jes Sorensen |
| * |
| * This file is based on the CyberVision64 frame buffer device and |
| * the generic Cirrus Logic driver. |
| * |
| * cyberfb.c: Copyright (C) 1996 Martin Apel, |
| * Geert Uytterhoeven |
| * clgen.c: Copyright (C) 1996 Frank Neumann |
| * |
| * History: |
| * - 22 Jan 97: Initial work |
| * - 14 Feb 97: Screen initialization works somewhat, still only |
| * 8-bit packed pixel is supported. |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file COPYING in the main directory of this archive |
| * for more details. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/string.h> |
| #include <linux/mm.h> |
| #include <linux/tty.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/fb.h> |
| #include <linux/zorro.h> |
| #include <linux/init.h> |
| |
| #include <asm/uaccess.h> |
| #include <asm/system.h> |
| #include <asm/irq.h> |
| #include <asm/pgtable.h> |
| #include <asm/io.h> |
| |
| #include <video/fbcon.h> |
| #include <video/fbcon-cfb8.h> |
| #include <video/fbcon-cfb16.h> |
| |
| #include "retz3fb.h" |
| |
| /* #define DEBUG if(1) */ |
| #define DEBUG if(0) |
| |
| /* |
| * Reserve space for one pattern line. |
| * |
| * For the time being we only support 4MB boards! |
| */ |
| |
| #define PAT_MEM_SIZE 16*3 |
| #define PAT_MEM_OFF (4*1024*1024 - PAT_MEM_SIZE) |
| |
| struct retz3fb_par { |
| int xres; |
| int yres; |
| int xres_vir; |
| int yres_vir; |
| int xoffset; |
| int yoffset; |
| int bpp; |
| |
| struct fb_bitfield red; |
| struct fb_bitfield green; |
| struct fb_bitfield blue; |
| struct fb_bitfield transp; |
| |
| int pixclock; |
| int left_margin; /* time from sync to picture */ |
| int right_margin; /* time from picture to sync */ |
| int upper_margin; /* time from sync to picture */ |
| int lower_margin; |
| int hsync_len; /* length of horizontal sync */ |
| int vsync_len; /* length of vertical sync */ |
| int vmode; |
| |
| int accel; |
| }; |
| |
| struct display_data { |
| long h_total; /* Horizontal Total */ |
| long h_sstart; /* Horizontal Sync Start */ |
| long h_sstop; /* Horizontal Sync Stop */ |
| long h_bstart; /* Horizontal Blank Start */ |
| long h_bstop; /* Horizontal Blank Stop */ |
| long h_dispend; /* Horizontal Display End */ |
| long v_total; /* Vertical Total */ |
| long v_sstart; /* Vertical Sync Start */ |
| long v_sstop; /* Vertical Sync Stop */ |
| long v_bstart; /* Vertical Blank Start */ |
| long v_bstop; /* Vertical Blank Stop */ |
| long v_dispend; /* Horizontal Display End */ |
| }; |
| |
| struct retz3_fb_info { |
| struct fb_info info; |
| unsigned char *base; |
| unsigned char *fbmem; |
| unsigned long fbsize; |
| volatile unsigned char *regs; |
| unsigned long physfbmem; |
| unsigned long physregs; |
| int current_par_valid; /* set to 0 by memset */ |
| int blitbusy; |
| struct display disp; |
| struct retz3fb_par current_par; |
| unsigned char color_table [256][3]; |
| }; |
| |
| |
| static char fontname[40] __initdata = { 0 }; |
| |
| #define retz3info(info) ((struct retz3_fb_info *)(info)) |
| #define fbinfo(info) ((struct fb_info *)(info)) |
| |
| |
| /* |
| * Frame Buffer Name |
| */ |
| |
| static char retz3fb_name[16] = "RetinaZ3"; |
| |
| |
| /* |
| * A small info on how to convert XFree86 timing values into fb |
| * timings - by Frank Neumann: |
| * |
| An XFree86 mode line consists of the following fields: |
| "800x600" 50 800 856 976 1040 600 637 643 666 |
| < name > DCF HR SH1 SH2 HFL VR SV1 SV2 VFL |
| |
| The fields in the fb_var_screeninfo structure are: |
| unsigned long pixclock; * pixel clock in ps (pico seconds) * |
| unsigned long left_margin; * time from sync to picture * |
| unsigned long right_margin; * time from picture to sync * |
| unsigned long upper_margin; * time from sync to picture * |
| unsigned long lower_margin; |
| unsigned long hsync_len; * length of horizontal sync * |
| unsigned long vsync_len; * length of vertical sync * |
| |
| 1) Pixelclock: |
| xfree: in MHz |
| fb: In Picoseconds (ps) |
| |
| pixclock = 1000000 / DCF |
| |
| 2) horizontal timings: |
| left_margin = HFL - SH2 |
| right_margin = SH1 - HR |
| hsync_len = SH2 - SH1 |
| |
| 3) vertical timings: |
| upper_margin = VFL - SV2 |
| lower_margin = SV1 - VR |
| vsync_len = SV2 - SV1 |
| |
| Good examples for VESA timings can be found in the XFree86 source tree, |
| under "programs/Xserver/hw/xfree86/doc/modeDB.txt". |
| */ |
| |
| /* |
| * Predefined Video Modes |
| */ |
| |
| static struct { |
| const char *name; |
| struct fb_var_screeninfo var; |
| } retz3fb_predefined[] __initdata = { |
| /* |
| * NB: it is very important to adjust the pixel-clock to the color-depth. |
| */ |
| |
| { |
| "640x480", { /* 640x480, 8 bpp */ |
| 640, 480, 640, 480, 0, 0, 8, 0, |
| {0, 8, 0}, {0, 8, 0}, {0, 8, 0}, {0, 0, 0}, |
| 0, 0, -1, -1, FB_ACCEL_NONE, 39722, 48, 16, 33, 10, 96, 2, |
| FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,FB_VMODE_NONINTERLACED |
| } |
| }, |
| /* |
| ModeLine "800x600" 36 800 824 896 1024 600 601 603 625 |
| < name > DCF HR SH1 SH2 HFL VR SV1 SV2 VFL |
| */ |
| { |
| "800x600", { /* 800x600, 8 bpp */ |
| 800, 600, 800, 600, 0, 0, 8, 0, |
| {0, 8, 0}, {0, 8, 0}, {0, 8, 0}, {0, 0, 0}, |
| 0, 0, -1, -1, FB_ACCELF_TEXT, 27778, 64, 24, 22, 1, 120, 2, |
| FB_SYNC_COMP_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED |
| } |
| }, |
| { |
| "800x600-60", { /* 800x600, 8 bpp */ |
| 800, 600, 800, 600, 0, 0, 8, 0, |
| {0, 8, 0}, {0, 8, 0}, {0, 8, 0}, {0, 0, 0}, |
| 0, 0, -1, -1, FB_ACCELF_TEXT, 25000, 88, 40, 23, 1, 128, 4, |
| FB_SYNC_COMP_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED |
| } |
| }, |
| { |
| "800x600-70", { /* 800x600, 8 bpp */ |
| 800, 600, 800, 600, 0, 0, 8, 0, |
| {0, 8, 0}, {0, 8, 0}, {0, 8, 0}, {0, 0, 0}, |
| 0, 0, -1, -1, FB_ACCELF_TEXT, 22272, 40, 24, 15, 9, 144, 12, |
| FB_SYNC_COMP_HIGH_ACT, FB_VMODE_NONINTERLACED |
| } |
| }, |
| /* |
| ModeLine "1024x768i" 45 1024 1064 1224 1264 768 777 785 817 interlace |
| < name > DCF HR SH1 SH2 HFL VR SV1 SV2 VFL |
| */ |
| { |
| "1024x768i", { /* 1024x768, 8 bpp, interlaced */ |
| 1024, 768, 1024, 768, 0, 0, 8, 0, |
| {0, 8, 0}, {0, 8, 0}, {0, 8, 0}, {0, 0, 0}, |
| 0, 0, -1, -1, FB_ACCELF_TEXT, 22222, 40, 40, 32, 9, 160, 8, |
| FB_SYNC_COMP_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT, FB_VMODE_INTERLACED |
| } |
| }, |
| { |
| "1024x768", { |
| 1024, 768, 1024, 768, 0, 0, 8, 0, |
| {0, 8, 0}, {0, 8, 0}, {0, 8, 0}, {0, 0, 0}, |
| 0, 0, -1, -1, FB_ACCEL_NONE, 12500, 92, 112, 31, 2, 204, 4, |
| FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED |
| } |
| }, |
| { |
| "640x480-16", { /* 640x480, 16 bpp */ |
| 640, 480, 640, 480, 0, 0, 16, 0, |
| {11, 5, 0}, {5, 6, 0}, {0, 5, 0}, {0, 0, 0}, |
| 0, 0, -1, -1, 0, 38461/2, 28, 32, 12, 10, 96, 2, |
| FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,FB_VMODE_NONINTERLACED |
| } |
| }, |
| { |
| "640x480-24", { /* 640x480, 24 bpp */ |
| 640, 480, 640, 480, 0, 0, 24, 0, |
| {8, 8, 8}, {8, 8, 8}, {8, 8, 8}, {0, 0, 0}, |
| 0, 0, -1, -1, 0, 38461/3, 28, 32, 12, 10, 96, 2, |
| FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,FB_VMODE_NONINTERLACED |
| } |
| }, |
| }; |
| |
| |
| #define NUM_TOTAL_MODES ARRAY_SIZE(retz3fb_predefined) |
| |
| static struct fb_var_screeninfo retz3fb_default; |
| |
| static int z3fb_inverse = 0; |
| static int z3fb_mode __initdata = 0; |
| |
| |
| /* |
| * Interface used by the world |
| */ |
| |
| int retz3fb_setup(char *options); |
| |
| static int retz3fb_get_fix(struct fb_fix_screeninfo *fix, int con, |
| struct fb_info *info); |
| static int retz3fb_get_var(struct fb_var_screeninfo *var, int con, |
| struct fb_info *info); |
| static int retz3fb_set_var(struct fb_var_screeninfo *var, int con, |
| struct fb_info *info); |
| static int retz3fb_get_cmap(struct fb_cmap *cmap, int kspc, int con, |
| struct fb_info *info); |
| static int retz3fb_setcolreg(unsigned int regno, unsigned int red, |
| unsigned int green, unsigned int blue, |
| unsigned int transp, struct fb_info *info); |
| static int retz3fb_blank(int blank, struct fb_info *info); |
| |
| |
| /* |
| * Interface to the low level console driver |
| */ |
| |
| int retz3fb_init(void); |
| static int z3fb_switch(int con, struct fb_info *info); |
| static int z3fb_updatevar(int con, struct fb_info *info); |
| |
| |
| /* |
| * Text console acceleration |
| */ |
| |
| #ifdef FBCON_HAS_CFB8 |
| static struct display_switch fbcon_retz3_8; |
| #endif |
| |
| |
| /* |
| * Accelerated Functions used by the low level console driver |
| */ |
| |
| static void retz3_bitblt(struct display *p, |
| unsigned short curx, unsigned short cury, unsigned |
| short destx, unsigned short desty, unsigned short |
| width, unsigned short height, unsigned short cmd, |
| unsigned short mask); |
| |
| /* |
| * Hardware Specific Routines |
| */ |
| |
| static int retz3_encode_fix(struct fb_info *info, |
| struct fb_fix_screeninfo *fix, |
| struct retz3fb_par *par); |
| static int retz3_decode_var(struct fb_var_screeninfo *var, |
| struct retz3fb_par *par); |
| static int retz3_encode_var(struct fb_var_screeninfo *var, |
| struct retz3fb_par *par); |
| static int retz3_getcolreg(unsigned int regno, unsigned int *red, |
| unsigned int *green, unsigned int *blue, |
| unsigned int *transp, struct fb_info *info); |
| |
| /* |
| * Internal routines |
| */ |
| |
| static void retz3fb_get_par(struct fb_info *info, struct retz3fb_par *par); |
| static void retz3fb_set_par(struct fb_info *info, struct retz3fb_par *par); |
| static int do_fb_set_var(struct fb_info *info, |
| struct fb_var_screeninfo *var, int isactive); |
| static void retz3fb_set_disp(int con, struct fb_info *info); |
| static int get_video_mode(const char *name); |
| |
| |
| /* -------------------- Hardware specific routines ------------------------- */ |
| |
| static unsigned short find_fq(unsigned int freq) |
| { |
| unsigned long f; |
| long tmp; |
| long prev = 0x7fffffff; |
| long n2, n1 = 3; |
| unsigned long m; |
| unsigned short res = 0; |
| |
| if (freq <= 31250000) |
| n2 = 3; |
| else if (freq <= 62500000) |
| n2 = 2; |
| else if (freq <= 125000000) |
| n2 = 1; |
| else if (freq <= 250000000) |
| n2 = 0; |
| else |
| return 0; |
| |
| |
| do { |
| f = freq >> (10 - n2); |
| |
| m = (f * n1) / (14318180/1024); |
| |
| if (m > 129) |
| break; |
| |
| tmp = (((m * 14318180) >> n2) / n1) - freq; |
| if (tmp < 0) |
| tmp = -tmp; |
| |
| if (tmp < prev) { |
| prev = tmp; |
| res = (((n2 << 5) | (n1-2)) << 8) | (m-2); |
| } |
| |
| } while ( (++n1) <= 21); |
| |
| return res; |
| } |
| |
| |
| static int retz3_set_video(struct fb_info *info, |
| struct fb_var_screeninfo *var, |
| struct retz3fb_par *par) |
| { |
| volatile unsigned char *regs = retz3info(info)->regs; |
| unsigned int freq; |
| |
| int xres, hfront, hsync, hback; |
| int yres, vfront, vsync, vback; |
| unsigned char tmp; |
| unsigned short best_freq; |
| struct display_data data; |
| |
| short clocksel = 0; /* Apparantly this is always zero */ |
| |
| int bpp = var->bits_per_pixel; |
| |
| /* |
| * XXX |
| */ |
| if (bpp == 24) |
| return 0; |
| |
| if ((bpp != 8) && (bpp != 16) && (bpp != 24)) |
| return -EFAULT; |
| |
| par->xoffset = 0; |
| par->yoffset = 0; |
| |
| xres = var->xres * bpp / 4; |
| hfront = var->right_margin * bpp / 4; |
| hsync = var->hsync_len * bpp / 4; |
| hback = var->left_margin * bpp / 4; |
| |
| if (var->vmode & FB_VMODE_DOUBLE) |
| { |
| yres = var->yres * 2; |
| vfront = var->lower_margin * 2; |
| vsync = var->vsync_len * 2; |
| vback = var->upper_margin * 2; |
| } |
| else if (var->vmode & FB_VMODE_INTERLACED) |
| { |
| yres = (var->yres + 1) / 2; |
| vfront = (var->lower_margin + 1) / 2; |
| vsync = (var->vsync_len + 1) / 2; |
| vback = (var->upper_margin + 1) / 2; |
| } |
| else |
| { |
| yres = var->yres; /* -1 ? */ |
| vfront = var->lower_margin; |
| vsync = var->vsync_len; |
| vback = var->upper_margin; |
| } |
| |
| data.h_total = (hback / 8) + (xres / 8) |
| + (hfront / 8) + (hsync / 8) - 1 /* + 1 */; |
| data.h_dispend = ((xres + bpp - 1)/ 8) - 1; |
| data.h_bstart = xres / 8 - 1 /* + 1 */; |
| |
| data.h_bstop = data.h_total+1 + 2 + 1; |
| data.h_sstart = (xres / 8) + (hfront / 8) + 1; |
| data.h_sstop = (xres / 8) + (hfront / 8) + (hsync / 8) + 1; |
| |
| data.v_total = yres + vfront + vsync + vback - 1; |
| |
| data.v_dispend = yres - 1; |
| data.v_bstart = yres - 1; |
| |
| data.v_bstop = data.v_total; |
| data.v_sstart = yres + vfront - 1 - 2; |
| data.v_sstop = yres + vfront + vsync - 1; |
| |
| #if 0 /* testing */ |
| |
| printk("HBS: %i\n", data.h_bstart); |
| printk("HSS: %i\n", data.h_sstart); |
| printk("HSE: %i\n", data.h_sstop); |
| printk("HBE: %i\n", data.h_bstop); |
| printk("HT: %i\n", data.h_total); |
| |
| printk("hsync: %i\n", hsync); |
| printk("hfront: %i\n", hfront); |
| printk("hback: %i\n", hback); |
| |
| printk("VBS: %i\n", data.v_bstart); |
| printk("VSS: %i\n", data.v_sstart); |
| printk("VSE: %i\n", data.v_sstop); |
| printk("VBE: %i\n", data.v_bstop); |
| printk("VT: %i\n", data.v_total); |
| |
| printk("vsync: %i\n", vsync); |
| printk("vfront: %i\n", vfront); |
| printk("vback: %i\n", vback); |
| #endif |
| |
| if (data.v_total >= 1024) |
| printk(KERN_ERR "MAYDAY: v_total >= 1024; bailing out!\n"); |
| |
| reg_w(regs, GREG_MISC_OUTPUT_W, 0xe3 | ((clocksel & 3) * 0x04)); |
| reg_w(regs, GREG_FEATURE_CONTROL_W, 0x00); |
| |
| seq_w(regs, SEQ_RESET, 0x00); |
| seq_w(regs, SEQ_RESET, 0x03); /* reset sequencer logic */ |
| |
| /* |
| * CLOCKING_MODE bits: |
| * 2: This one is only set for certain text-modes, wonder if |
| * it may be for EGA-lines? (it was referred to as CLKDIV2) |
| * (The CL drivers sets it to 0x21 with the comment: |
| * FullBandwidth (video off) and 8/9 dot clock) |
| */ |
| seq_w(regs, SEQ_CLOCKING_MODE, 0x01 | 0x00 /* 0x08 */); |
| |
| seq_w(regs, SEQ_MAP_MASK, 0x0f); /* enable writing to plane 0-3 */ |
| seq_w(regs, SEQ_CHAR_MAP_SELECT, 0x00); /* doesn't matter in gfx-mode */ |
| seq_w(regs, SEQ_MEMORY_MODE, 0x06); /* CL driver says 0x0e for 256 col mode*/ |
| seq_w(regs, SEQ_RESET, 0x01); |
| seq_w(regs, SEQ_RESET, 0x03); |
| |
| seq_w(regs, SEQ_EXTENDED_ENABLE, 0x05); |
| |
| seq_w(regs, SEQ_CURSOR_CONTROL, 0x00); /* disable cursor */ |
| seq_w(regs, SEQ_PRIM_HOST_OFF_HI, 0x00); |
| seq_w(regs, SEQ_PRIM_HOST_OFF_HI, 0x00); |
| seq_w(regs, SEQ_LINEAR_0, 0x4a); |
| seq_w(regs, SEQ_LINEAR_1, 0x00); |
| |
| seq_w(regs, SEQ_SEC_HOST_OFF_HI, 0x00); |
| seq_w(regs, SEQ_SEC_HOST_OFF_LO, 0x00); |
| seq_w(regs, SEQ_EXTENDED_MEM_ENA, 0x3 | 0x4 | 0x10 | 0x40); |
| |
| /* |
| * The lower 4 bits (0-3) are used to set the font-width for |
| * text-mode - DON'T try to set this for gfx-mode. |
| */ |
| seq_w(regs, SEQ_EXT_CLOCK_MODE, 0x10); |
| seq_w(regs, SEQ_EXT_VIDEO_ADDR, 0x03); |
| |
| /* |
| * Extended Pixel Control: |
| * bit 0: text-mode=0, gfx-mode=1 (Graphics Byte ?) |
| * bit 1: (Packed/Nibble Pixel Format ?) |
| * bit 4-5: depth, 0=1-8bpp, 1=9-16bpp, 2=17-24bpp |
| */ |
| seq_w(regs, SEQ_EXT_PIXEL_CNTL, 0x01 | (((bpp / 8) - 1) << 4)); |
| |
| seq_w(regs, SEQ_BUS_WIDTH_FEEDB, 0x04); |
| seq_w(regs, SEQ_COLOR_EXP_WFG, 0x01); |
| seq_w(regs, SEQ_COLOR_EXP_WBG, 0x00); |
| seq_w(regs, SEQ_EXT_RW_CONTROL, 0x00); |
| seq_w(regs, SEQ_MISC_FEATURE_SEL, (0x51 | (clocksel & 8))); |
| seq_w(regs, SEQ_COLOR_KEY_CNTL, 0x40); |
| seq_w(regs, SEQ_COLOR_KEY_MATCH0, 0x00); |
| seq_w(regs, SEQ_COLOR_KEY_MATCH1, 0x00); |
| seq_w(regs, SEQ_COLOR_KEY_MATCH2, 0x00); |
| seq_w(regs, SEQ_CRC_CONTROL, 0x00); |
| seq_w(regs, SEQ_PERF_SELECT, 0x10); |
| seq_w(regs, SEQ_ACM_APERTURE_1, 0x00); |
| seq_w(regs, SEQ_ACM_APERTURE_2, 0x30); |
| seq_w(regs, SEQ_ACM_APERTURE_3, 0x00); |
| seq_w(regs, SEQ_MEMORY_MAP_CNTL, 0x03); |
| |
| |
| /* unlock register CRT0..CRT7 */ |
| crt_w(regs, CRT_END_VER_RETR, (data.v_sstop & 0x0f) | 0x20); |
| |
| /* Zuerst zu schreibende Werte nur per printk ausgeben */ |
| DEBUG printk("CRT_HOR_TOTAL: %ld\n", data.h_total); |
| crt_w(regs, CRT_HOR_TOTAL, data.h_total & 0xff); |
| |
| DEBUG printk("CRT_HOR_DISP_ENA_END: %ld\n", data.h_dispend); |
| crt_w(regs, CRT_HOR_DISP_ENA_END, (data.h_dispend) & 0xff); |
| |
| DEBUG printk("CRT_START_HOR_BLANK: %ld\n", data.h_bstart); |
| crt_w(regs, CRT_START_HOR_BLANK, data.h_bstart & 0xff); |
| |
| DEBUG printk("CRT_END_HOR_BLANK: 128+%ld\n", data.h_bstop % 32); |
| crt_w(regs, CRT_END_HOR_BLANK, 0x80 | (data.h_bstop & 0x1f)); |
| |
| DEBUG printk("CRT_START_HOR_RETR: %ld\n", data.h_sstart); |
| crt_w(regs, CRT_START_HOR_RETR, data.h_sstart & 0xff); |
| |
| tmp = (data.h_sstop & 0x1f); |
| if (data.h_bstop & 0x20) |
| tmp |= 0x80; |
| DEBUG printk("CRT_END_HOR_RETR: %d\n", tmp); |
| crt_w(regs, CRT_END_HOR_RETR, tmp); |
| |
| DEBUG printk("CRT_VER_TOTAL: %ld\n", data.v_total & 0xff); |
| crt_w(regs, CRT_VER_TOTAL, (data.v_total & 0xff)); |
| |
| tmp = 0x10; /* LineCompare bit #9 */ |
| if (data.v_total & 256) |
| tmp |= 0x01; |
| if (data.v_dispend & 256) |
| tmp |= 0x02; |
| if (data.v_sstart & 256) |
| tmp |= 0x04; |
| if (data.v_bstart & 256) |
| tmp |= 0x08; |
| if (data.v_total & 512) |
| tmp |= 0x20; |
| if (data.v_dispend & 512) |
| tmp |= 0x40; |
| if (data.v_sstart & 512) |
| tmp |= 0x80; |
| DEBUG printk("CRT_OVERFLOW: %d\n", tmp); |
| crt_w(regs, CRT_OVERFLOW, tmp); |
| |
| crt_w(regs, CRT_PRESET_ROW_SCAN, 0x00); /* not CL !!! */ |
| |
| tmp = 0x40; /* LineCompare bit #8 */ |
| if (data.v_bstart & 512) |
| tmp |= 0x20; |
| if (var->vmode & FB_VMODE_DOUBLE) |
| tmp |= 0x80; |
| DEBUG printk("CRT_MAX_SCAN_LINE: %d\n", tmp); |
| crt_w(regs, CRT_MAX_SCAN_LINE, tmp); |
| |
| crt_w(regs, CRT_CURSOR_START, 0x00); |
| crt_w(regs, CRT_CURSOR_END, 8 & 0x1f); /* font height */ |
| |
| crt_w(regs, CRT_START_ADDR_HIGH, 0x00); |
| crt_w(regs, CRT_START_ADDR_LOW, 0x00); |
| |
| crt_w(regs, CRT_CURSOR_LOC_HIGH, 0x00); |
| crt_w(regs, CRT_CURSOR_LOC_LOW, 0x00); |
| |
| DEBUG printk("CRT_START_VER_RETR: %ld\n", data.v_sstart & 0xff); |
| crt_w(regs, CRT_START_VER_RETR, (data.v_sstart & 0xff)); |
| |
| #if 1 |
| /* 5 refresh cycles per scanline */ |
| DEBUG printk("CRT_END_VER_RETR: 64+32+%ld\n", data.v_sstop % 16); |
| crt_w(regs, CRT_END_VER_RETR, ((data.v_sstop & 0x0f) | 0x40 | 0x20)); |
| #else |
| DEBUG printk("CRT_END_VER_RETR: 128+32+%ld\n", data.v_sstop % 16); |
| crt_w(regs, CRT_END_VER_RETR, ((data.v_sstop & 0x0f) | 128 | 32)); |
| #endif |
| DEBUG printk("CRT_VER_DISP_ENA_END: %ld\n", data.v_dispend & 0xff); |
| crt_w(regs, CRT_VER_DISP_ENA_END, (data.v_dispend & 0xff)); |
| |
| DEBUG printk("CRT_START_VER_BLANK: %ld\n", data.v_bstart & 0xff); |
| crt_w(regs, CRT_START_VER_BLANK, (data.v_bstart & 0xff)); |
| |
| DEBUG printk("CRT_END_VER_BLANK: %ld\n", data.v_bstop & 0xff); |
| crt_w(regs, CRT_END_VER_BLANK, (data.v_bstop & 0xff)); |
| |
| DEBUG printk("CRT_MODE_CONTROL: 0xe3\n"); |
| crt_w(regs, CRT_MODE_CONTROL, 0xe3); |
| |
| DEBUG printk("CRT_LINE_COMPARE: 0xff\n"); |
| crt_w(regs, CRT_LINE_COMPARE, 0xff); |
| |
| tmp = (var->xres_virtual / 8) * (bpp / 8); |
| crt_w(regs, CRT_OFFSET, tmp); |
| |
| crt_w(regs, CRT_UNDERLINE_LOC, 0x07); /* probably font-height - 1 */ |
| |
| tmp = 0x20; /* Enable extended end bits */ |
| if (data.h_total & 0x100) |
| tmp |= 0x01; |
| if ((data.h_dispend) & 0x100) |
| tmp |= 0x02; |
| if (data.h_bstart & 0x100) |
| tmp |= 0x04; |
| if (data.h_sstart & 0x100) |
| tmp |= 0x08; |
| if (var->vmode & FB_VMODE_INTERLACED) |
| tmp |= 0x10; |
| DEBUG printk("CRT_EXT_HOR_TIMING1: %d\n", tmp); |
| crt_w(regs, CRT_EXT_HOR_TIMING1, tmp); |
| |
| tmp = 0x00; |
| if (((var->xres_virtual / 8) * (bpp / 8)) & 0x100) |
| tmp |= 0x10; |
| crt_w(regs, CRT_EXT_START_ADDR, tmp); |
| |
| tmp = 0x00; |
| if (data.h_total & 0x200) |
| tmp |= 0x01; |
| if ((data.h_dispend) & 0x200) |
| tmp |= 0x02; |
| if (data.h_bstart & 0x200) |
| tmp |= 0x04; |
| if (data.h_sstart & 0x200) |
| tmp |= 0x08; |
| tmp |= ((data.h_bstop & 0xc0) >> 2); |
| tmp |= ((data.h_sstop & 0x60) << 1); |
| crt_w(regs, CRT_EXT_HOR_TIMING2, tmp); |
| DEBUG printk("CRT_EXT_HOR_TIMING2: %d\n", tmp); |
| |
| tmp = 0x10; /* Line compare bit 10 */ |
| if (data.v_total & 0x400) |
| tmp |= 0x01; |
| if ((data.v_dispend) & 0x400) |
| tmp |= 0x02; |
| if (data.v_bstart & 0x400) |
| tmp |= 0x04; |
| if (data.v_sstart & 0x400) |
| tmp |= 0x08; |
| tmp |= ((data.v_bstop & 0x300) >> 3); |
| if (data.v_sstop & 0x10) |
| tmp |= 0x80; |
| crt_w(regs, CRT_EXT_VER_TIMING, tmp); |
| DEBUG printk("CRT_EXT_VER_TIMING: %d\n", tmp); |
| |
| crt_w(regs, CRT_MONITOR_POWER, 0x00); |
| |
| /* |
| * Convert from ps to Hz. |
| */ |
| freq = 2000000000 / var->pixclock; |
| freq = freq * 500; |
| |
| best_freq = find_fq(freq); |
| pll_w(regs, 0x02, best_freq); |
| best_freq = find_fq(61000000); |
| pll_w(regs, 0x0a, best_freq); |
| pll_w(regs, 0x0e, 0x22); |
| |
| gfx_w(regs, GFX_SET_RESET, 0x00); |
| gfx_w(regs, GFX_ENABLE_SET_RESET, 0x00); |
| gfx_w(regs, GFX_COLOR_COMPARE, 0x00); |
| gfx_w(regs, GFX_DATA_ROTATE, 0x00); |
| gfx_w(regs, GFX_READ_MAP_SELECT, 0x00); |
| gfx_w(regs, GFX_GRAPHICS_MODE, 0x00); |
| gfx_w(regs, GFX_MISC, 0x05); |
| gfx_w(regs, GFX_COLOR_XCARE, 0x0f); |
| gfx_w(regs, GFX_BITMASK, 0xff); |
| |
| reg_r(regs, ACT_ADDRESS_RESET); |
| attr_w(regs, ACT_PALETTE0 , 0x00); |
| attr_w(regs, ACT_PALETTE1 , 0x01); |
| attr_w(regs, ACT_PALETTE2 , 0x02); |
| attr_w(regs, ACT_PALETTE3 , 0x03); |
| attr_w(regs, ACT_PALETTE4 , 0x04); |
| attr_w(regs, ACT_PALETTE5 , 0x05); |
| attr_w(regs, ACT_PALETTE6 , 0x06); |
| attr_w(regs, ACT_PALETTE7 , 0x07); |
| attr_w(regs, ACT_PALETTE8 , 0x08); |
| attr_w(regs, ACT_PALETTE9 , 0x09); |
| attr_w(regs, ACT_PALETTE10, 0x0a); |
| attr_w(regs, ACT_PALETTE11, 0x0b); |
| attr_w(regs, ACT_PALETTE12, 0x0c); |
| attr_w(regs, ACT_PALETTE13, 0x0d); |
| attr_w(regs, ACT_PALETTE14, 0x0e); |
| attr_w(regs, ACT_PALETTE15, 0x0f); |
| reg_r(regs, ACT_ADDRESS_RESET); |
| |
| attr_w(regs, ACT_ATTR_MODE_CNTL, 0x09); /* 0x01 for CL */ |
| |
| attr_w(regs, ACT_OVERSCAN_COLOR, 0x00); |
| attr_w(regs, ACT_COLOR_PLANE_ENA, 0x0f); |
| attr_w(regs, ACT_HOR_PEL_PANNING, 0x00); |
| attr_w(regs, ACT_COLOR_SELECT, 0x00); |
| |
| reg_r(regs, ACT_ADDRESS_RESET); |
| reg_w(regs, ACT_DATA, 0x20); |
| |
| reg_w(regs, VDAC_MASK, 0xff); |
| |
| /* |
| * Extended palette addressing ??? |
| */ |
| switch (bpp){ |
| case 8: |
| reg_w(regs, 0x83c6, 0x00); |
| break; |
| case 16: |
| reg_w(regs, 0x83c6, 0x60); |
| break; |
| case 24: |
| reg_w(regs, 0x83c6, 0xe0); |
| break; |
| default: |
| printk(KERN_INFO "Illegal color-depth: %i\n", bpp); |
| } |
| |
| reg_w(regs, VDAC_ADDRESS, 0x00); |
| |
| seq_w(regs, SEQ_MAP_MASK, 0x0f ); |
| |
| return 0; |
| } |
| |
| |
| /* |
| * This function should fill in the `fix' structure based on the |
| * values in the `par' structure. |
| */ |
| |
| static int retz3_encode_fix(struct fb_info *info, |
| struct fb_fix_screeninfo *fix, |
| struct retz3fb_par *par) |
| { |
| struct retz3_fb_info *zinfo = retz3info(info); |
| |
| memset(fix, 0, sizeof(struct fb_fix_screeninfo)); |
| strcpy(fix->id, retz3fb_name); |
| fix->smem_start = zinfo->physfbmem; |
| fix->smem_len = zinfo->fbsize; |
| fix->mmio_start = zinfo->physregs; |
| fix->mmio_len = 0x00c00000; |
| |
| fix->type = FB_TYPE_PACKED_PIXELS; |
| fix->type_aux = 0; |
| if (par->bpp == 8) |
| fix->visual = FB_VISUAL_PSEUDOCOLOR; |
| else |
| fix->visual = FB_VISUAL_TRUECOLOR; |
| |
| fix->xpanstep = 0; |
| fix->ypanstep = 0; |
| fix->ywrapstep = 0; |
| fix->line_length = 0; |
| |
| fix->accel = FB_ACCEL_NCR_77C32BLT; |
| |
| return 0; |
| } |
| |
| |
| /* |
| * Get the video params out of `var'. If a value doesn't fit, round |
| * it up, if it's too big, return -EINVAL. |
| */ |
| |
| static int retz3_decode_var(struct fb_var_screeninfo *var, |
| struct retz3fb_par *par) |
| { |
| par->xres = var->xres; |
| par->yres = var->yres; |
| par->xres_vir = var->xres_virtual; |
| par->yres_vir = var->yres_virtual; |
| par->bpp = var->bits_per_pixel; |
| par->pixclock = var->pixclock; |
| par->vmode = var->vmode; |
| |
| par->red = var->red; |
| par->green = var->green; |
| par->blue = var->blue; |
| par->transp = var->transp; |
| |
| par->left_margin = var->left_margin; |
| par->right_margin = var->right_margin; |
| par->upper_margin = var->upper_margin; |
| par->lower_margin = var->lower_margin; |
| par->hsync_len = var->hsync_len; |
| par->vsync_len = var->vsync_len; |
| |
| if (var->accel_flags & FB_ACCELF_TEXT) |
| par->accel = FB_ACCELF_TEXT; |
| else |
| par->accel = 0; |
| |
| return 0; |
| } |
| |
| |
| /* |
| * Fill the `var' structure based on the values in `par' and maybe |
| * other values read out of the hardware. |
| */ |
| |
| static int retz3_encode_var(struct fb_var_screeninfo *var, |
| struct retz3fb_par *par) |
| { |
| memset(var, 0, sizeof(struct fb_var_screeninfo)); |
| var->xres = par->xres; |
| var->yres = par->yres; |
| var->xres_virtual = par->xres_vir; |
| var->yres_virtual = par->yres_vir; |
| var->xoffset = 0; |
| var->yoffset = 0; |
| |
| var->bits_per_pixel = par->bpp; |
| var->grayscale = 0; |
| |
| var->red = par->red; |
| var->green = par->green; |
| var->blue = par->blue; |
| var->transp = par->transp; |
| |
| var->nonstd = 0; |
| var->activate = 0; |
| |
| var->height = -1; |
| var->width = -1; |
| |
| var->accel_flags = (par->accel && par->bpp == 8) ? FB_ACCELF_TEXT : 0; |
| |
| var->pixclock = par->pixclock; |
| |
| var->sync = 0; /* ??? */ |
| var->left_margin = par->left_margin; |
| var->right_margin = par->right_margin; |
| var->upper_margin = par->upper_margin; |
| var->lower_margin = par->lower_margin; |
| var->hsync_len = par->hsync_len; |
| var->vsync_len = par->vsync_len; |
| |
| var->vmode = par->vmode; |
| return 0; |
| } |
| |
| |
| /* |
| * Set a single color register. Return != 0 for invalid regno. |
| */ |
| |
| static int retz3fb_setcolreg(unsigned int regno, unsigned int red, |
| unsigned int green, unsigned int blue, |
| unsigned int transp, struct fb_info *info) |
| { |
| struct retz3_fb_info *zinfo = retz3info(info); |
| volatile unsigned char *regs = zinfo->regs; |
| |
| /* We'll get to this */ |
| |
| if (regno > 255) |
| return 1; |
| |
| red >>= 10; |
| green >>= 10; |
| blue >>= 10; |
| |
| zinfo->color_table[regno][0] = red; |
| zinfo->color_table[regno][1] = green; |
| zinfo->color_table[regno][2] = blue; |
| |
| reg_w(regs, VDAC_ADDRESS_W, regno); |
| reg_w(regs, VDAC_DATA, red); |
| reg_w(regs, VDAC_DATA, green); |
| reg_w(regs, VDAC_DATA, blue); |
| |
| return 0; |
| } |
| |
| |
| /* |
| * Read a single color register and split it into |
| * colors/transparent. Return != 0 for invalid regno. |
| */ |
| |
| static int retz3_getcolreg(unsigned int regno, unsigned int *red, |
| unsigned int *green, unsigned int *blue, |
| unsigned int *transp, struct fb_info *info) |
| { |
| struct retz3_fb_info *zinfo = retz3info(info); |
| int t; |
| |
| if (regno > 255) |
| return 1; |
| t = zinfo->color_table[regno][0]; |
| *red = (t<<10) | (t<<4) | (t>>2); |
| t = zinfo->color_table[regno][1]; |
| *green = (t<<10) | (t<<4) | (t>>2); |
| t = zinfo->color_table[regno][2]; |
| *blue = (t<<10) | (t<<4) | (t>>2); |
| *transp = 0; |
| return 0; |
| } |
| |
| |
| static inline void retz3_busy(struct display *p) |
| { |
| struct retz3_fb_info *zinfo = retz3info(p->fb_info); |
| volatile unsigned char *acm = zinfo->base + ACM_OFFSET; |
| unsigned char blt_status; |
| |
| if (zinfo->blitbusy) { |
| do{ |
| blt_status = *((acm) + (ACM_START_STATUS + 2)); |
| }while ((blt_status & 1) == 0); |
| zinfo->blitbusy = 0; |
| } |
| } |
| |
| |
| static void retz3_bitblt (struct display *p, |
| unsigned short srcx, unsigned short srcy, |
| unsigned short destx, unsigned short desty, |
| unsigned short width, unsigned short height, |
| unsigned short cmd, unsigned short mask) |
| { |
| struct fb_var_screeninfo *var = &p->var; |
| struct retz3_fb_info *zinfo = retz3info(p->fb_info); |
| volatile unsigned long *acm = (unsigned long *)(zinfo->base + ACM_OFFSET); |
| unsigned long *pattern = (unsigned long *)(zinfo->fbmem + PAT_MEM_OFF); |
| |
| unsigned short mod; |
| unsigned long tmp; |
| unsigned long pat, src, dst; |
| |
| int i, xres_virtual = var->xres_virtual; |
| short bpp = (var->bits_per_pixel & 0xff); |
| |
| if (bpp < 8) |
| bpp = 8; |
| |
| tmp = mask | (mask << 16); |
| |
| retz3_busy(p); |
| |
| i = 0; |
| do{ |
| *pattern++ = tmp; |
| }while(i++ < bpp/4); |
| |
| tmp = cmd << 8; |
| *(acm + ACM_RASTEROP_ROTATION/4) = tmp; |
| |
| mod = 0xc0c2; |
| |
| pat = 8 * PAT_MEM_OFF; |
| dst = bpp * (destx + desty * xres_virtual); |
| |
| /* |
| * Source is not set for clear. |
| */ |
| if ((cmd != Z3BLTclear) && (cmd != Z3BLTset)) { |
| src = bpp * (srcx + srcy * xres_virtual); |
| |
| if (destx > srcx) { |
| mod &= ~0x8000; |
| src += bpp * (width - 1); |
| dst += bpp * (width - 1); |
| pat += bpp * 2; |
| } |
| if (desty > srcy) { |
| mod &= ~0x4000; |
| src += bpp * (height - 1) * xres_virtual; |
| dst += bpp * (height - 1) * xres_virtual; |
| pat += bpp * 4; |
| } |
| |
| *(acm + ACM_SOURCE/4) = cpu_to_le32(src); |
| } |
| |
| *(acm + ACM_PATTERN/4) = cpu_to_le32(pat); |
| |
| *(acm + ACM_DESTINATION/4) = cpu_to_le32(dst); |
| |
| tmp = mod << 16; |
| *(acm + ACM_CONTROL/4) = tmp; |
| |
| tmp = width | (height << 16); |
| |
| *(acm + ACM_BITMAP_DIMENSION/4) = cpu_to_le32(tmp); |
| |
| *(((volatile unsigned char *)acm) + ACM_START_STATUS) = 0x00; |
| *(((volatile unsigned char *)acm) + ACM_START_STATUS) = 0x01; |
| zinfo->blitbusy = 1; |
| } |
| |
| #if 0 |
| /* |
| * Move cursor to x, y |
| */ |
| static void retz3_MoveCursor (unsigned short x, unsigned short y) |
| { |
| /* Guess we gotta deal with the cursor at some point */ |
| } |
| #endif |
| |
| |
| /* |
| * Fill the hardware's `par' structure. |
| */ |
| |
| static void retz3fb_get_par(struct fb_info *info, struct retz3fb_par *par) |
| { |
| struct retz3_fb_info *zinfo = retz3info(info); |
| |
| if (zinfo->current_par_valid) |
| *par = zinfo->current_par; |
| else |
| retz3_decode_var(&retz3fb_default, par); |
| } |
| |
| |
| static void retz3fb_set_par(struct fb_info *info, struct retz3fb_par *par) |
| { |
| struct retz3_fb_info *zinfo = retz3info(info); |
| |
| zinfo->current_par = *par; |
| zinfo->current_par_valid = 1; |
| } |
| |
| |
| static int do_fb_set_var(struct fb_info *info, |
| struct fb_var_screeninfo *var, int isactive) |
| { |
| int err, activate; |
| struct retz3fb_par par; |
| struct retz3_fb_info *zinfo = retz3info(info); |
| |
| if ((err = retz3_decode_var(var, &par))) |
| return err; |
| activate = var->activate; |
| |
| /* XXX ... what to do about isactive ? */ |
| |
| if ((var->activate & FB_ACTIVATE_MASK) == FB_ACTIVATE_NOW && isactive) |
| retz3fb_set_par(info, &par); |
| retz3_encode_var(var, &par); |
| var->activate = activate; |
| |
| retz3_set_video(info, var, &zinfo->current_par); |
| |
| return 0; |
| } |
| |
| /* |
| * Get the Fixed Part of the Display |
| */ |
| |
| static int retz3fb_get_fix(struct fb_fix_screeninfo *fix, int con, |
| struct fb_info *info) |
| { |
| struct retz3fb_par par; |
| int error = 0; |
| |
| if (con == -1) |
| retz3fb_get_par(info, &par); |
| else |
| error = retz3_decode_var(&fb_display[con].var, &par); |
| return(error ? error : retz3_encode_fix(info, fix, &par)); |
| } |
| |
| |
| /* |
| * Get the User Defined Part of the Display |
| */ |
| |
| static int retz3fb_get_var(struct fb_var_screeninfo *var, int con, |
| struct fb_info *info) |
| { |
| struct retz3fb_par par; |
| int error = 0; |
| |
| if (con == -1) { |
| retz3fb_get_par(info, &par); |
| error = retz3_encode_var(var, &par); |
| } else |
| *var = fb_display[con].var; |
| return error; |
| } |
| |
| |
| static void retz3fb_set_disp(int con, struct fb_info *info) |
| { |
| struct fb_fix_screeninfo fix; |
| struct display *display; |
| struct retz3_fb_info *zinfo = retz3info(info); |
| |
| if (con >= 0) |
| display = &fb_display[con]; |
| else |
| display = &zinfo->disp; /* used during initialization */ |
| |
| retz3fb_get_fix(&fix, con, info); |
| |
| if (con == -1) |
| con = 0; |
| |
| display->visual = fix.visual; |
| display->type = fix.type; |
| display->type_aux = fix.type_aux; |
| display->ypanstep = fix.ypanstep; |
| display->ywrapstep = fix.ywrapstep; |
| display->can_soft_blank = 1; |
| display->inverse = z3fb_inverse; |
| |
| /* |
| * This seems to be about 20% faster. |
| */ |
| display->scrollmode = SCROLL_YREDRAW; |
| |
| switch (display->var.bits_per_pixel) { |
| #ifdef FBCON_HAS_CFB8 |
| case 8: |
| if (display->var.accel_flags & FB_ACCELF_TEXT) { |
| display->dispsw = &fbcon_retz3_8; |
| retz3_set_video(info, &display->var, &zinfo->current_par); |
| } else |
| display->dispsw = &fbcon_cfb8; |
| break; |
| #endif |
| #ifdef FBCON_HAS_CFB16 |
| case 16: |
| display->dispsw = &fbcon_cfb16; |
| break; |
| #endif |
| default: |
| display->dispsw = &fbcon_dummy; |
| break; |
| } |
| } |
| |
| |
| /* |
| * Set the User Defined Part of the Display |
| */ |
| |
| static int retz3fb_set_var(struct fb_var_screeninfo *var, int con, |
| struct fb_info *info) |
| { |
| int err, oldxres, oldyres, oldvxres, oldvyres, oldbpp, oldaccel; |
| struct display *display; |
| struct retz3_fb_info *zinfo = retz3info(info); |
| |
| if (con >= 0) |
| display = &fb_display[con]; |
| else |
| display = &zinfo->disp; /* used during initialization */ |
| |
| if ((err = do_fb_set_var(info, var, con == info->currcon))) |
| return err; |
| if ((var->activate & FB_ACTIVATE_MASK) == FB_ACTIVATE_NOW) { |
| oldxres = display->var.xres; |
| oldyres = display->var.yres; |
| oldvxres = display->var.xres_virtual; |
| oldvyres = display->var.yres_virtual; |
| oldbpp = display->var.bits_per_pixel; |
| oldaccel = display->var.accel_flags; |
| display->var = *var; |
| |
| if (oldxres != var->xres || oldyres != var->yres || |
| oldvxres != var->xres_virtual || |
| oldvyres != var->yres_virtual || |
| oldbpp != var->bits_per_pixel || |
| oldaccel != var->accel_flags) { |
| |
| struct fb_fix_screeninfo fix; |
| retz3fb_get_fix(&fix, con, info); |
| |
| display->visual = fix.visual; |
| display->type = fix.type; |
| display->type_aux = fix.type_aux; |
| display->ypanstep = fix.ypanstep; |
| display->ywrapstep = fix.ywrapstep; |
| display->line_length = fix.line_length; |
| display->can_soft_blank = 1; |
| display->inverse = z3fb_inverse; |
| switch (display->var.bits_per_pixel) { |
| #ifdef FBCON_HAS_CFB8 |
| case 8: |
| if (var->accel_flags & FB_ACCELF_TEXT) { |
| display->dispsw = &fbcon_retz3_8; |
| } else |
| display->dispsw = &fbcon_cfb8; |
| break; |
| #endif |
| #ifdef FBCON_HAS_CFB16 |
| case 16: |
| display->dispsw = &fbcon_cfb16; |
| break; |
| #endif |
| default: |
| display->dispsw = &fbcon_dummy; |
| break; |
| } |
| /* |
| * We still need to find a way to tell the X |
| * server that the video mem has been fiddled with |
| * so it redraws the entire screen when switching |
| * between X and a text console. |
| */ |
| retz3_set_video(info, var, &zinfo->current_par); |
| |
| if (info->changevar) |
| (*info->changevar)(con); |
| } |
| |
| if (oldbpp != var->bits_per_pixel) { |
| if ((err = fb_alloc_cmap(&display->cmap, 0, 0))) |
| return err; |
| do_install_cmap(con, info); |
| } |
| } |
| return 0; |
| } |
| |
| |
| /* |
| * Get the Colormap |
| */ |
| |
| static int retz3fb_get_cmap(struct fb_cmap *cmap, int kspc, int con, |
| struct fb_info *info) |
| { |
| if (con == info->currcon) /* current console? */ |
| return(fb_get_cmap(cmap, kspc, retz3_getcolreg, info)); |
| else if (fb_display[con].cmap.len) /* non default colormap? */ |
| fb_copy_cmap(&fb_display[con].cmap, cmap, kspc ? 0 : 2); |
| else |
| fb_copy_cmap(fb_default_cmap(1<<fb_display[con].var.bits_per_pixel), |
| cmap, kspc ? 0 : 2); |
| return 0; |
| } |
| |
| /* |
| * Blank the display. |
| */ |
| |
| static int retz3fb_blank(int blank, struct fb_info *info) |
| { |
| struct retz3_fb_info *zinfo = retz3info(info); |
| volatile unsigned char *regs = retz3info(info)->regs; |
| short i; |
| |
| if (blank) |
| for (i = 0; i < 256; i++){ |
| reg_w(regs, VDAC_ADDRESS_W, i); |
| reg_w(regs, VDAC_DATA, 0); |
| reg_w(regs, VDAC_DATA, 0); |
| reg_w(regs, VDAC_DATA, 0); |
| } |
| else |
| for (i = 0; i < 256; i++){ |
| reg_w(regs, VDAC_ADDRESS_W, i); |
| reg_w(regs, VDAC_DATA, zinfo->color_table[i][0]); |
| reg_w(regs, VDAC_DATA, zinfo->color_table[i][1]); |
| reg_w(regs, VDAC_DATA, zinfo->color_table[i][2]); |
| } |
| return 0; |
| } |
| |
| static struct fb_ops retz3fb_ops = { |
| .owner = THIS_MODULE, |
| .fb_get_fix = retz3fb_get_fix, |
| .fb_get_var = retz3fb_get_var, |
| .fb_set_var = retz3fb_set_var, |
| .fb_get_cmap = retz3fb_get_cmap, |
| .fb_set_cmap = gen_set_cmap, |
| .fb_setcolreg = retz3fb_setcolreg, |
| .fb_blank = retz3fb_blank, |
| }; |
| |
| int __init retz3fb_setup(char *options) |
| { |
| char *this_opt; |
| |
| if (!options || !*options) |
| return 0; |
| |
| while ((this_opt = strsep(&options, ",")) != NULL) { |
| if (!*this_opt) |
| continue; |
| if (!strcmp(this_opt, "inverse")) { |
| z3fb_inverse = 1; |
| fb_invert_cmaps(); |
| } else if (!strncmp(this_opt, "font:", 5)) { |
| strlcpy(fontname, this_opt+5, sizeof(fontname)); |
| } else |
| z3fb_mode = get_video_mode(this_opt); |
| } |
| return 0; |
| } |
| |
| |
| /* |
| * Initialization |
| */ |
| |
| int __init retz3fb_init(void) |
| { |
| unsigned long board_addr, board_size; |
| struct zorro_dev *z = NULL; |
| volatile unsigned char *regs; |
| struct retz3fb_par par; |
| struct retz3_fb_info *zinfo; |
| struct fb_info *fb_info; |
| short i; |
| int res = -ENXIO; |
| |
| while ((z = zorro_find_device(ZORRO_PROD_MACROSYSTEMS_RETINA_Z3, z))) { |
| board_addr = z->resource.start; |
| board_size = z->resource.end-z->resource.start+1; |
| if (!request_mem_region(board_addr, 0x0c00000, |
| "ncr77c32blt")) { |
| continue; |
| if (!request_mem_region(board_addr+VIDEO_MEM_OFFSET, |
| 0x00400000, "RAM")) |
| release_mem_region(board_addr, 0x00c00000); |
| continue; |
| } |
| if (!(zinfo = kmalloc(sizeof(struct retz3_fb_info), |
| GFP_KERNEL))) |
| return -ENOMEM; |
| memset(zinfo, 0, sizeof(struct retz3_fb_info)); |
| |
| zinfo->base = ioremap(board_addr, board_size); |
| zinfo->regs = zinfo->base; |
| zinfo->fbmem = zinfo->base + VIDEO_MEM_OFFSET; |
| /* Get memory size - for now we asume it's a 4MB board */ |
| zinfo->fbsize = 0x00400000; /* 4 MB */ |
| zinfo->physregs = board_addr; |
| zinfo->physfbmem = board_addr + VIDEO_MEM_OFFSET; |
| |
| fb_info = fbinfo(zinfo); |
| |
| for (i = 0; i < 256; i++){ |
| for (i = 0; i < 256; i++){ |
| zinfo->color_table[i][0] = i; |
| zinfo->color_table[i][1] = i; |
| zinfo->color_table[i][2] = i; |
| } |
| } |
| |
| regs = zinfo->regs; |
| /* Disable hardware cursor */ |
| seq_w(regs, SEQ_CURSOR_Y_INDEX, 0x00); |
| |
| retz3fb_setcolreg (255, 56<<8, 100<<8, 160<<8, 0, fb_info); |
| retz3fb_setcolreg (254, 0, 0, 0, 0, fb_info); |
| |
| strcpy(fb_info->modename, retz3fb_name); |
| fb_info->changevar = NULL; |
| fb_info->fbops = &retz3fb_ops; |
| fb_info->screen_base = zinfo->fbmem; |
| fb_info->disp = &zinfo->disp; |
| fb_info->currcon = -1; |
| fb_info->switch_con = &z3fb_switch; |
| fb_info->updatevar = &z3fb_updatevar; |
| fb_info->flags = FBINFO_FLAG_DEFAULT; |
| strlcpy(fb_info->fontname, fontname, sizeof(fb_info->fontname)); |
| |
| if (z3fb_mode == -1) |
| retz3fb_default = retz3fb_predefined[0].var; |
| |
| retz3_decode_var(&retz3fb_default, &par); |
| retz3_encode_var(&retz3fb_default, &par); |
| |
| do_fb_set_var(fb_info, &retz3fb_default, 0); |
| retz3fb_get_var(&zinfo->disp.var, -1, fb_info); |
| |
| retz3fb_set_disp(-1, fb_info); |
| |
| do_install_cmap(0, fb_info); |
| |
| if (register_framebuffer(fb_info) < 0) |
| return -EINVAL; |
| |
| printk(KERN_INFO "fb%d: %s frame buffer device, using %ldK of " |
| "video memory\n", fb_info->node, |
| fb_info->modename, zinfo->fbsize>>10); |
| |
| /* FIXME: This driver cannot be unloaded yet */ |
| res = 0; |
| } |
| return res; |
| } |
| |
| |
| static int z3fb_switch(int con, struct fb_info *info) |
| { |
| /* Do we have to save the colormap? */ |
| if (fb_display[info->currcon].cmap.len) |
| fb_get_cmap(&fb_display[info->currcon].cmap, 1, |
| retz3_getcolreg, info); |
| |
| do_fb_set_var(info, &fb_display[con].var, 1); |
| info->currcon = con; |
| /* Install new colormap */ |
| do_install_cmap(con, info); |
| return 0; |
| } |
| |
| |
| /* |
| * Update the `var' structure (called by fbcon.c) |
| * |
| * This call looks only at yoffset and the FB_VMODE_YWRAP flag in `var'. |
| * Since it's called by a kernel driver, no range checking is done. |
| */ |
| |
| static int z3fb_updatevar(int con, struct fb_info *info) |
| { |
| return 0; |
| } |
| |
| /* |
| * Get a Video Mode |
| */ |
| |
| static int __init get_video_mode(const char *name) |
| { |
| short i; |
| |
| for (i = 0; i < NUM_TOTAL_MODES; i++) |
| if (!strcmp(name, retz3fb_predefined[i].name)){ |
| retz3fb_default = retz3fb_predefined[i].var; |
| return i; |
| } |
| return -1; |
| } |
| |
| |
| #ifdef MODULE |
| MODULE_LICENSE("GPL"); |
| |
| int init_module(void) |
| { |
| return retz3fb_init(); |
| } |
| #endif |
| |
| |
| /* |
| * Text console acceleration |
| */ |
| |
| #ifdef FBCON_HAS_CFB8 |
| static void retz3_8_bmove(struct display *p, int sy, int sx, |
| int dy, int dx, int height, int width) |
| { |
| int fontwidth = fontwidth(p); |
| |
| sx *= fontwidth; |
| dx *= fontwidth; |
| width *= fontwidth; |
| |
| retz3_bitblt(p, |
| (unsigned short)sx, |
| (unsigned short)(sy*fontheight(p)), |
| (unsigned short)dx, |
| (unsigned short)(dy*fontheight(p)), |
| (unsigned short)width, |
| (unsigned short)(height*fontheight(p)), |
| Z3BLTcopy, |
| 0xffff); |
| } |
| |
| static void retz3_8_clear(struct vc_data *conp, struct display *p, |
| int sy, int sx, int height, int width) |
| { |
| unsigned short col; |
| int fontwidth = fontwidth(p); |
| |
| sx *= fontwidth; |
| width *= fontwidth; |
| |
| col = attr_bgcol_ec(p, conp); |
| col &= 0xff; |
| col |= (col << 8); |
| |
| retz3_bitblt(p, |
| (unsigned short)sx, |
| (unsigned short)(sy*fontheight(p)), |
| (unsigned short)sx, |
| (unsigned short)(sy*fontheight(p)), |
| (unsigned short)width, |
| (unsigned short)(height*fontheight(p)), |
| Z3BLTset, |
| col); |
| } |
| |
| |
| static void retz3_putc(struct vc_data *conp, struct display *p, int c, |
| int yy, int xx) |
| { |
| retz3_busy(p); |
| fbcon_cfb8_putc(conp, p, c, yy, xx); |
| } |
| |
| |
| static void retz3_putcs(struct vc_data *conp, struct display *p, |
| const unsigned short *s, int count, |
| int yy, int xx) |
| { |
| retz3_busy(p); |
| fbcon_cfb8_putcs(conp, p, s, count, yy, xx); |
| } |
| |
| |
| static void retz3_revc(struct display *p, int xx, int yy) |
| { |
| retz3_busy(p); |
| fbcon_cfb8_revc(p, xx, yy); |
| } |
| |
| |
| static void retz3_clear_margins(struct vc_data* conp, struct display* p, |
| int bottom_only) |
| { |
| retz3_busy(p); |
| fbcon_cfb8_clear_margins(conp, p, bottom_only); |
| } |
| |
| |
| static struct display_switch fbcon_retz3_8 = { |
| .setup = fbcon_cfb8_setup, |
| .bmove = retz3_8_bmove, |
| .clear = retz3_8_clear, |
| .putc = retz3_putc, |
| .putcs = retz3_putcs, |
| .revc = retz3_revc, |
| .clear_margins = retz3_clear_margins, |
| .fontwidthmask = FONTWIDTH(8) |
| }; |
| #endif |