arch/arm/mach-msm/board-qrd7627a.c

/* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/gpio_event.h>
#include <linux/usb/android.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/i2c.h>
#include <linux/android_pmem.h>
#include <linux/bootmem.h>
#include <linux/mfd/marimba.h>
#include <linux/power_supply.h>
#include <linux/input/rmi_platformdata.h>
#include <linux/input/rmi_i2c.h>
#include <asm/mach/mmc.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/board.h>
#include <mach/msm_iomap.h>
#include <mach/msm_hsusb.h>
#include <mach/rpc_hsusb.h>
#include <mach/rpc_pmapp.h>
#include <mach/usbdiag.h>
#include <mach/usb_gadget_fserial.h>
#include <mach/msm_memtypes.h>
#include <mach/msm_serial_hs.h>
#include <mach/vreg.h>
#include <mach/pmic.h>
#include <mach/socinfo.h>
#include <mach/vreg.h>
#include <mach/rpc_pmapp.h>
#include <mach/msm_battery.h>
#include <mach/rpc_server_handset.h>
#include <mach/socinfo.h>

#include "devices.h"
#include "devices-msm7x2xa.h"
#include "pm.h"
#include "timer.h"
#include "pm-boot.h"

#define PMEM_KERNEL_EBI1_SIZE	0x3A000
#define MSM_PMEM_AUDIO_SIZE	0x5B000
#define BAHAMA_SLAVE_ID_FM_ADDR         0x2A
#define BAHAMA_SLAVE_ID_QMEMBIST_ADDR   0x7B
#define BAHAMA_SLAVE_ID_FM_REG 0x02
#define FM_GPIO	83

enum {
	GPIO_HOST_VBUS_EN	= 107,
	GPIO_BT_SYS_REST_EN	= 114,
	GPIO_WAKE_ON_WIRELESS,
	GPIO_BACKLIGHT_EN,
	GPIO_NC,
	GPIO_CAM_3MP_PWDN,	/* CAM_VGA */
	GPIO_WLAN_EN,
	GPIO_CAM_5MP_SHDN_EN,
	GPIO_CAM_5MP_RESET,
	GPIO_TP,
	GPIO_CAM_GP_CAMIF_RESET,
};

	/* FM Platform power and shutdown routines */
#define FPGA_MSM_CNTRL_REG2 0x90008010

static void config_pcm_i2s_mode(int mode)
{
	void __iomem *cfg_ptr;
	u8 reg2;

	cfg_ptr = ioremap_nocache(FPGA_MSM_CNTRL_REG2, sizeof(char));

	if (!cfg_ptr)
		return;
	if (mode) {
		/*enable the pcm mode in FPGA*/
		reg2 = readb_relaxed(cfg_ptr);
		if (reg2 == 0) {
			reg2 = 1;
			writeb_relaxed(reg2, cfg_ptr);
		}
	} else {
		/*enable i2s mode in FPGA*/
		reg2 = readb_relaxed(cfg_ptr);
		if (reg2 == 1) {
			reg2 = 0;
			writeb_relaxed(reg2, cfg_ptr);
		}
	}
	iounmap(cfg_ptr);
}

static unsigned fm_i2s_config_power_on[] = {
	/*FM_I2S_SD*/
	GPIO_CFG(68, 1, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
	/*FM_I2S_WS*/
	GPIO_CFG(70, 1, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
	/*FM_I2S_SCK*/
	GPIO_CFG(71, 1, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
};

static unsigned fm_i2s_config_power_off[] = {
	/*FM_I2S_SD*/
	GPIO_CFG(68, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
	/*FM_I2S_WS*/
	GPIO_CFG(70, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
	/*FM_I2S_SCK*/
	GPIO_CFG(71, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
};

static unsigned bt_config_power_on[] = {
	/*RFR*/
	GPIO_CFG(43, 2, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
	/*CTS*/
	GPIO_CFG(44, 2, GPIO_CFG_INPUT,  GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
	/*RX*/
	GPIO_CFG(45, 2, GPIO_CFG_INPUT,  GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
	/*TX*/
	GPIO_CFG(46, 2, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
};
static unsigned bt_config_pcm_on[] = {
	/*PCM_DOUT*/
	GPIO_CFG(68, 1, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
	/*PCM_DIN*/
	GPIO_CFG(69, 1, GPIO_CFG_INPUT,  GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
	/*PCM_SYNC*/
	GPIO_CFG(70, 1, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
	/*PCM_CLK*/
	GPIO_CFG(71, 1, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
};
static unsigned bt_config_power_off[] = {
	/*RFR*/
	GPIO_CFG(43, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
	/*CTS*/
	GPIO_CFG(44, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
	/*RX*/
	GPIO_CFG(45, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
	/*TX*/
	GPIO_CFG(46, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
};
static unsigned bt_config_pcm_off[] = {
	/*PCM_DOUT*/
	GPIO_CFG(68, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
	/*PCM_DIN*/
	GPIO_CFG(69, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
	/*PCM_SYNC*/
	GPIO_CFG(70, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
	/*PCM_CLK*/
	GPIO_CFG(71, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
};


static int config_i2s(int mode)
{
	int pin, rc = 0;

	if (mode == FM_I2S_ON) {
		if (machine_is_msm7627a_qrd1())
			config_pcm_i2s_mode(0);
		pr_err("%s mode = FM_I2S_ON", __func__);
		for (pin = 0; pin < ARRAY_SIZE(fm_i2s_config_power_on);
			pin++) {
				rc = gpio_tlmm_config(
					fm_i2s_config_power_on[pin],
					GPIO_CFG_ENABLE
					);
				if (rc < 0)
					return rc;
			}
	} else if (mode == FM_I2S_OFF) {
		pr_err("%s mode = FM_I2S_OFF", __func__);
		for (pin = 0; pin < ARRAY_SIZE(fm_i2s_config_power_off);
			pin++) {
				rc = gpio_tlmm_config(
					fm_i2s_config_power_off[pin],
					GPIO_CFG_ENABLE
					);
				if (rc < 0)
					return rc;
			}
	}
	return rc;
}
static int config_pcm(int mode)
{
	int pin, rc = 0;

	if (mode == BT_PCM_ON) {
		if (machine_is_msm7627a_qrd1())
			config_pcm_i2s_mode(1);
		pr_err("%s mode =BT_PCM_ON", __func__);
		for (pin = 0; pin < ARRAY_SIZE(bt_config_pcm_on);
			pin++) {
				rc = gpio_tlmm_config(bt_config_pcm_on[pin],
					GPIO_CFG_ENABLE);
				if (rc < 0)
					return rc;
			}
	} else if (mode == BT_PCM_OFF) {
		pr_err("%s mode =BT_PCM_OFF", __func__);
		for (pin = 0; pin < ARRAY_SIZE(bt_config_pcm_off);
			pin++) {
				rc = gpio_tlmm_config(bt_config_pcm_off[pin],
					GPIO_CFG_ENABLE);
				if (rc < 0)
					return rc;
			}

	}

	return rc;
}

static int msm_bahama_setup_pcm_i2s(int mode)
{
	int fm_state = 0, bt_state = 0;
	int rc = 0;
	struct marimba config = { .mod_id =  SLAVE_ID_BAHAMA};

	fm_state = marimba_get_fm_status(&config);
	bt_state = marimba_get_bt_status(&config);

	switch (mode) {
	case BT_PCM_ON:
	case BT_PCM_OFF:
		if (!fm_state)
			rc = config_pcm(mode);
		break;
	case FM_I2S_ON:
		rc = config_i2s(mode);
		break;
	case FM_I2S_OFF:
		if (bt_state)
			rc = config_pcm(BT_PCM_ON);
		else
			rc = config_i2s(mode);
		break;
	default:
		rc = -EIO;
		pr_err("%s:Unsupported mode", __func__);
	}
	return rc;
}

static int bt_set_gpio(int on)
{
	int rc = 0;
	struct marimba config = { .mod_id =  SLAVE_ID_BAHAMA};

	if (on) {
		rc = gpio_direction_output(GPIO_BT_SYS_REST_EN, 1);
		msleep(100);
	} else {
		if (!marimba_get_fm_status(&config) &&
				!marimba_get_bt_status(&config)) {
			gpio_set_value_cansleep(GPIO_BT_SYS_REST_EN, 0);
			rc = gpio_direction_input(GPIO_BT_SYS_REST_EN);
			msleep(100);
		}
	}
	if (rc)
		pr_err("%s: BT sys_reset_en GPIO : Error", __func__);

	return rc;
}
static struct vreg *fm_regulator;
static int fm_radio_setup(struct marimba_fm_platform_data *pdata)
{
	int rc = 0;
	const char *id = "FMPW";
	uint32_t irqcfg;
	struct marimba config = { .mod_id =  SLAVE_ID_BAHAMA};
	u8 value;

	/* Voting for 1.8V Regulator */
	fm_regulator = vreg_get(NULL , "msme1");
	if (IS_ERR(fm_regulator)) {
		pr_err("%s: vreg get failed with : (%ld)\n",
			__func__, PTR_ERR(fm_regulator));
		return -EINVAL;
	}

	/* Set the voltage level to 1.8V */
	rc = vreg_set_level(fm_regulator, 1800);
	if (rc < 0) {
		pr_err("%s: set regulator level failed with :(%d)\n",
			__func__, rc);
		goto fm_vreg_fail;
	}

	/* Enabling the 1.8V regulator */
	rc = vreg_enable(fm_regulator);
	if (rc) {
		pr_err("%s: enable regulator failed with :(%d)\n",
			__func__, rc);
		goto fm_vreg_fail;
	}

	/* Voting for 19.2MHz clock */
	rc = pmapp_clock_vote(id, PMAPP_CLOCK_ID_D1,
			PMAPP_CLOCK_VOTE_ON);
	if (rc < 0) {
		pr_err("%s: clock vote failed with :(%d)\n",
			 __func__, rc);
		goto fm_clock_vote_fail;
	}

	rc = bt_set_gpio(1);
	if (rc) {
		pr_err("%s: bt_set_gpio = %d", __func__, rc);
		goto fm_gpio_config_fail;
	}
	/*re-write FM Slave Id, after reset*/
	value = BAHAMA_SLAVE_ID_FM_ADDR;
	rc = marimba_write_bit_mask(&config,
			BAHAMA_SLAVE_ID_FM_REG, &value, 1, 0xFF);
	if (rc < 0) {
		pr_err("%s: FM Slave ID rewrite Failed = %d", __func__, rc);
		goto fm_gpio_config_fail;
	}
	/* Configuring the FM GPIO */
	irqcfg = GPIO_CFG(FM_GPIO, 0, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL,
			GPIO_CFG_2MA);

	rc = gpio_tlmm_config(irqcfg, GPIO_CFG_ENABLE);
	if (rc) {
		pr_err("%s: gpio_tlmm_config(%#x)=%d\n",
			 __func__, irqcfg, rc);
		goto fm_gpio_config_fail;
	}

	return 0;

fm_gpio_config_fail:
	pmapp_clock_vote(id, PMAPP_CLOCK_ID_D1,
		PMAPP_CLOCK_VOTE_OFF);
	bt_set_gpio(0);
fm_clock_vote_fail:
	vreg_disable(fm_regulator);

fm_vreg_fail:
	vreg_put(fm_regulator);

	return rc;
};

static void fm_radio_shutdown(struct marimba_fm_platform_data *pdata)
{
	int rc;
	const char *id = "FMPW";

	/* Releasing the GPIO line used by FM */
	uint32_t irqcfg = GPIO_CFG(FM_GPIO, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_UP,
		GPIO_CFG_2MA);

	rc = gpio_tlmm_config(irqcfg, GPIO_CFG_ENABLE);
	if (rc)
		pr_err("%s: gpio_tlmm_config(%#x)=%d\n",
			 __func__, irqcfg, rc);

	/* Releasing the 1.8V Regulator */
	if (fm_regulator != NULL) {
		rc = vreg_disable(fm_regulator);
		if (rc)
			pr_err("%s: disable regulator failed:(%d)\n",
				__func__, rc);
		fm_regulator = NULL;
	}

	/* Voting off the clock */
	rc = pmapp_clock_vote(id, PMAPP_CLOCK_ID_D1,
		PMAPP_CLOCK_VOTE_OFF);
	if (rc < 0)
		pr_err("%s: voting off failed with :(%d)\n",
			__func__, rc);
	rc = bt_set_gpio(0);
	if (rc)
		pr_err("%s: bt_set_gpio = %d", __func__, rc);
}

static struct marimba_fm_platform_data marimba_fm_pdata = {
	.fm_setup = fm_radio_setup,
	.fm_shutdown = fm_radio_shutdown,
	.irq = MSM_GPIO_TO_INT(FM_GPIO),
	.vreg_s2 = NULL,
	.vreg_xo_out = NULL,
	/* Configuring the FM SoC as I2S Master */
	.is_fm_soc_i2s_master = true,
	.config_i2s_gpio = msm_bahama_setup_pcm_i2s,
};

static struct platform_device msm_wlan_ar6000_pm_device = {
	.name           = "wlan_ar6000_pm_dev",
	.id             = -1,
};

#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)

static struct platform_device msm_bt_power_device = {
	.name = "bt_power",
};
struct bahama_config_register {
		u8 reg;
		u8 value;
		u8 mask;
};
struct bt_vreg_info {
	const char *name;
	unsigned int pmapp_id;
	unsigned int level;
	unsigned int is_pin_controlled;
	struct vreg *vregs;
};
static struct bt_vreg_info bt_vregs[] = {
	{"msme1", 2, 1800, 0, NULL},
	{"bt", 21, 2900, 1, NULL}
};

static int bahama_bt(int on)
{

	int rc = 0;
	int i;

	struct marimba config = { .mod_id =  SLAVE_ID_BAHAMA};

	struct bahama_variant_register {
		const size_t size;
		const struct bahama_config_register *set;
	};

	const struct bahama_config_register *p;

	u8 version;

	const struct bahama_config_register v10_bt_on[] = {
		{ 0xE9, 0x00, 0xFF },
		{ 0xF4, 0x80, 0xFF },
		{ 0xE4, 0x00, 0xFF },
		{ 0xE5, 0x00, 0x0F },
#ifdef CONFIG_WLAN
		{ 0xE6, 0x38, 0x7F },
		{ 0xE7, 0x06, 0xFF },
#endif
		{ 0xE9, 0x21, 0xFF },
		{ 0x01, 0x0C, 0x1F },
		{ 0x01, 0x08, 0x1F },
	};

	const struct bahama_config_register v20_bt_on_fm_off[] = {
		{ 0x11, 0x0C, 0xFF },
		{ 0x13, 0x01, 0xFF },
		{ 0xF4, 0x80, 0xFF },
		{ 0xF0, 0x00, 0xFF },
		{ 0xE9, 0x00, 0xFF },
#ifdef CONFIG_WLAN
		{ 0x81, 0x00, 0x7F },
		{ 0x82, 0x00, 0xFF },
		{ 0xE6, 0x38, 0x7F },
		{ 0xE7, 0x06, 0xFF },
#endif
		{ 0x8E, 0x15, 0xFF },
		{ 0x8F, 0x15, 0xFF },
		{ 0x90, 0x15, 0xFF },

		{ 0xE9, 0x21, 0xFF },
	};

	const struct bahama_config_register v20_bt_on_fm_on[] = {
		{ 0x11, 0x0C, 0xFF },
		{ 0x13, 0x01, 0xFF },
		{ 0xF4, 0x86, 0xFF },
		{ 0xF0, 0x06, 0xFF },
		{ 0xE9, 0x00, 0xFF },
#ifdef CONFIG_WLAN
		{ 0x81, 0x00, 0x7F },
		{ 0x82, 0x00, 0xFF },
		{ 0xE6, 0x38, 0x7F },
		{ 0xE7, 0x06, 0xFF },
#endif
		{ 0xE9, 0x21, 0xFF },
	};

	const struct bahama_config_register v10_bt_off[] = {
		{ 0xE9, 0x00, 0xFF },
	};

	const struct bahama_config_register v20_bt_off_fm_off[] = {
		{ 0xF4, 0x84, 0xFF },
		{ 0xF0, 0x04, 0xFF },
		{ 0xE9, 0x00, 0xFF }
	};

	const struct bahama_config_register v20_bt_off_fm_on[] = {
		{ 0xF4, 0x86, 0xFF },
		{ 0xF0, 0x06, 0xFF },
		{ 0xE9, 0x00, 0xFF }
	};
	const struct bahama_variant_register bt_bahama[2][3] = {
	{
		{ ARRAY_SIZE(v10_bt_off), v10_bt_off },
		{ ARRAY_SIZE(v20_bt_off_fm_off), v20_bt_off_fm_off },
		{ ARRAY_SIZE(v20_bt_off_fm_on), v20_bt_off_fm_on }
	},
	{
		{ ARRAY_SIZE(v10_bt_on), v10_bt_on },
		{ ARRAY_SIZE(v20_bt_on_fm_off), v20_bt_on_fm_off },
		{ ARRAY_SIZE(v20_bt_on_fm_on), v20_bt_on_fm_on }
	}
	};

	u8 offset = 0; /* index into bahama configs */
	on = on ? 1 : 0;
	version = marimba_read_bahama_ver(&config);
	if ((int)version < 0 || version == BAHAMA_VER_UNSUPPORTED) {
		dev_err(&msm_bt_power_device.dev, "%s: Bahama \
				version read Error, version = %d \n",
				__func__, version);
		return -EIO;
	}

	if (version == BAHAMA_VER_2_0) {
		if (marimba_get_fm_status(&config))
			offset = 0x01;
	}

	p = bt_bahama[on][version + offset].set;

	dev_info(&msm_bt_power_device.dev,
		"%s: found version %d\n", __func__, version);

	for (i = 0; i < bt_bahama[on][version + offset].size; i++) {
		u8 value = (p+i)->value;
		rc = marimba_write_bit_mask(&config,
			(p+i)->reg,
			&value,
			sizeof((p+i)->value),
			(p+i)->mask);
		if (rc < 0) {
			dev_err(&msm_bt_power_device.dev,
				"%s: reg %x write failed: %d\n",
				__func__, (p+i)->reg, rc);
			return rc;
		}
		dev_dbg(&msm_bt_power_device.dev,
			"%s: reg 0x%02x write value 0x%02x mask 0x%02x\n",
				__func__, (p+i)->reg,
				value, (p+i)->mask);
		value = 0;
		rc = marimba_read_bit_mask(&config,
				(p+i)->reg, &value,
				sizeof((p+i)->value), (p+i)->mask);
		if (rc < 0)
			dev_err(&msm_bt_power_device.dev, "%s marimba_read_bit_mask- error",
					__func__);
		dev_dbg(&msm_bt_power_device.dev,
			"%s: reg 0x%02x read value 0x%02x mask 0x%02x\n",
				__func__, (p+i)->reg,
				value, (p+i)->mask);
	}
	/* Update BT Status */
	if (on)
		marimba_set_bt_status(&config, true);
	else
		marimba_set_bt_status(&config, false);
	return rc;
}
static int bluetooth_switch_regulators(int on)
{
	int i, rc = 0;
	const char *id = "BTPW";

	for (i = 0; i < ARRAY_SIZE(bt_vregs); i++) {
		if (!bt_vregs[i].vregs) {
			pr_err("%s: vreg_get %s failed(%d)\n",
			__func__, bt_vregs[i].name, rc);
			goto vreg_fail;
		}
		rc = on ? vreg_set_level(bt_vregs[i].vregs,
				bt_vregs[i].level) : 0;

		if (rc < 0) {
			pr_err("%s: vreg set level failed (%d)\n",
					__func__, rc);
			goto vreg_set_level_fail;
		}
		if (bt_vregs[i].is_pin_controlled == 1) {
			rc = pmapp_vreg_pincntrl_vote(id,
					bt_vregs[i].pmapp_id,
					PMAPP_CLOCK_ID_D1,
					on ? PMAPP_CLOCK_VOTE_ON :
					PMAPP_CLOCK_VOTE_OFF);
		} else {
		rc = on ? vreg_enable(bt_vregs[i].vregs) :
			  vreg_disable(bt_vregs[i].vregs);
		}

		if (rc < 0) {
			pr_err("%s: vreg %s %s failed(%d)\n",
					__func__, bt_vregs[i].name,
					on ? "enable" : "disable", rc);
			goto vreg_fail;
		}
	}

	return rc;

vreg_fail:
	while (i) {
		if (on)
			vreg_disable(bt_vregs[--i].vregs);
		}
vreg_set_level_fail:
	vreg_put(bt_vregs[0].vregs);
	vreg_put(bt_vregs[1].vregs);
	return rc;
}

static unsigned int msm_bahama_setup_power(void)
{
	int rc = 0;
	struct vreg *vreg_s3 = NULL;

	vreg_s3 = vreg_get(NULL, "msme1");
	if (IS_ERR(vreg_s3)) {
		pr_err("%s: vreg get failed (%ld)\n",
			__func__, PTR_ERR(vreg_s3));
		return PTR_ERR(vreg_s3);
	}
	rc = vreg_set_level(vreg_s3, 1800);
	if (rc < 0) {
		pr_err("%s: vreg set level failed (%d)\n",
				__func__, rc);
		goto vreg_fail;
	}
	rc = vreg_enable(vreg_s3);
	if (rc < 0) {
		pr_err("%s: vreg enable failed (%d)\n",
		       __func__, rc);
		goto vreg_fail;
	}

	/*setup Bahama_sys_reset_n*/
	rc = gpio_request(GPIO_BT_SYS_REST_EN, "bahama sys_rst_n");
	if (rc < 0) {
		pr_err("%s: gpio_request %d = %d\n", __func__,
			GPIO_BT_SYS_REST_EN, rc);
		goto vreg_fail;
	}
	rc = bt_set_gpio(1);
	if (rc < 0) {
		pr_err("%s: bt_set_gpio %d = %d\n", __func__,
			GPIO_BT_SYS_REST_EN, rc);
		goto gpio_fail;
	}
	return rc;

gpio_fail:
	gpio_free(GPIO_BT_SYS_REST_EN);
vreg_fail:
	vreg_put(vreg_s3);
	return rc;
}

static unsigned int msm_bahama_shutdown_power(int value)
{
	int rc = 0;
	struct vreg *vreg_s3 = NULL;

	vreg_s3 = vreg_get(NULL, "msme1");
	if (IS_ERR(vreg_s3)) {
		pr_err("%s: vreg get failed (%ld)\n",
			__func__, PTR_ERR(vreg_s3));
		return PTR_ERR(vreg_s3);
	}
	rc = vreg_disable(vreg_s3);
	if (rc) {
		pr_err("%s: vreg disable failed (%d)\n",
		       __func__, rc);
		vreg_put(vreg_s3);
		return rc;
	}
	if (value == BAHAMA_ID) {
		rc = bt_set_gpio(0);
		if (rc) {
			pr_err("%s: bt_set_gpio = %d\n",
					__func__, rc);
		}
	}
	return rc;
}

static unsigned int msm_bahama_core_config(int type)
{
	int rc = 0;

	if (type == BAHAMA_ID) {
		int i;
		struct marimba config = { .mod_id =  SLAVE_ID_BAHAMA};
		const struct bahama_config_register v20_init[] = {
			/* reg, value, mask */
			{ 0xF4, 0x84, 0xFF }, /* AREG */
			{ 0xF0, 0x04, 0xFF } /* DREG */
		};
		if (marimba_read_bahama_ver(&config) == BAHAMA_VER_2_0) {
			for (i = 0; i < ARRAY_SIZE(v20_init); i++) {
				u8 value = v20_init[i].value;
				rc = marimba_write_bit_mask(&config,
					v20_init[i].reg,
					&value,
					sizeof(v20_init[i].value),
					v20_init[i].mask);
				if (rc < 0) {
					pr_err("%s: reg %d write failed: %d\n",
						__func__, v20_init[i].reg, rc);
					return rc;
				}
				pr_debug("%s: reg 0x%02x value 0x%02x"
					" mask 0x%02x\n",
					__func__, v20_init[i].reg,
					v20_init[i].value, v20_init[i].mask);
			}
		}
	}
	rc = bt_set_gpio(0);
	if (rc) {
		pr_err("%s: bt_set_gpio = %d\n",
		       __func__, rc);
	}
	pr_debug("core type: %d\n", type);
	return rc;
}

static int bluetooth_power(int on)
{
	int pin, rc = 0;
	const char *id = "BTPW";
	int cid = 0;

	cid = adie_get_detected_connectivity_type();
	if (cid != BAHAMA_ID) {
		pr_err("%s: unexpected adie connectivity type: %d\n",
					__func__, cid);
		return -ENODEV;
	}
	if (on) {
		/*setup power for BT SOC*/
		rc = bt_set_gpio(on);
		if (rc) {
			pr_err("%s: bt_set_gpio = %d\n",
					__func__, rc);
			goto exit;
		}
		rc = bluetooth_switch_regulators(on);
		if (rc < 0) {
			pr_err("%s: bluetooth_switch_regulators rc = %d",
					__func__, rc);
			goto exit;
		}
		/*setup BT GPIO lines*/
		for (pin = 0; pin < ARRAY_SIZE(bt_config_power_on);
			pin++) {
			rc = gpio_tlmm_config(bt_config_power_on[pin],
					GPIO_CFG_ENABLE);
			if (rc < 0) {
				pr_err("%s: gpio_tlmm_config(%#x)=%d\n",
						__func__,
						bt_config_power_on[pin],
						rc);
				goto fail_power;
			}
		}
		/*Setup BT clocks*/
		rc = pmapp_clock_vote(id, PMAPP_CLOCK_ID_D1,
			PMAPP_CLOCK_VOTE_ON);
		if (rc < 0) {
			pr_err("Failed to vote for TCXO_D1 ON\n");
			goto fail_clock;
		}
		msleep(20);

		/*I2C config for Bahama*/
		rc = bahama_bt(1);
		if (rc < 0) {
			pr_err("%s: bahama_bt rc = %d", __func__, rc);
			goto fail_i2c;
		}
		msleep(20);

		/*setup BT PCM lines*/
		rc = msm_bahama_setup_pcm_i2s(BT_PCM_ON);
		if (rc < 0) {
			pr_err("%s: msm_bahama_setup_pcm_i2s , rc =%d\n",
				__func__, rc);
				goto fail_power;
			}
		rc = pmapp_clock_vote(id, PMAPP_CLOCK_ID_D1,
				  PMAPP_CLOCK_VOTE_PIN_CTRL);
		if (rc < 0)
			pr_err("%s:Pin Control Failed, rc = %d",
					__func__, rc);

	} else {
		rc = bahama_bt(0);
		if (rc < 0)
			pr_err("%s: bahama_bt rc = %d", __func__, rc);

		rc = bt_set_gpio(on);
		if (rc) {
			pr_err("%s: bt_set_gpio = %d\n",
					__func__, rc);
		}
fail_i2c:
		rc = pmapp_clock_vote(id, PMAPP_CLOCK_ID_D1,
				  PMAPP_CLOCK_VOTE_OFF);
		if (rc < 0)
			pr_err("%s: Failed to vote Off D1\n", __func__);
fail_clock:
		for (pin = 0; pin < ARRAY_SIZE(bt_config_power_off);
			pin++) {
				rc = gpio_tlmm_config(bt_config_power_off[pin],
					GPIO_CFG_ENABLE);
				if (rc < 0) {
					pr_err("%s: gpio_tlmm_config(%#x)=%d\n",
					__func__, bt_config_power_off[pin], rc);
				}
			}
		rc = msm_bahama_setup_pcm_i2s(BT_PCM_OFF);
		if (rc < 0) {
			pr_err("%s: msm_bahama_setup_pcm_i2s, rc =%d\n",
					__func__, rc);
				}
fail_power:
		rc = bluetooth_switch_regulators(0);
		if (rc < 0) {
			pr_err("%s: switch_regulators : rc = %d",\
					__func__, rc);
			goto exit;
		}
	}
	return rc;
exit:
	pr_err("%s: failed with rc = %d", __func__, rc);
	return rc;
}

static int __init bt_power_init(void)
{
	int i, rc = 0;
	for (i = 0; i < ARRAY_SIZE(bt_vregs); i++) {
			bt_vregs[i].vregs = vreg_get(NULL,
					bt_vregs[i].name);
			if (IS_ERR(bt_vregs[i].vregs)) {
				pr_err("%s: vreg get %s failed (%ld)\n",
				       __func__, bt_vregs[i].name,
				       PTR_ERR(bt_vregs[i].vregs));
				rc = PTR_ERR(bt_vregs[i].vregs);
				goto vreg_get_fail;
			}
		}

	msm_bt_power_device.dev.platform_data = &bluetooth_power;

	return rc;

vreg_get_fail:
	while (i)
		vreg_put(bt_vregs[--i].vregs);
	return rc;
}

static struct marimba_platform_data marimba_pdata = {
	.slave_id[SLAVE_ID_BAHAMA_FM]        = BAHAMA_SLAVE_ID_FM_ADDR,
	.slave_id[SLAVE_ID_BAHAMA_QMEMBIST]  = BAHAMA_SLAVE_ID_QMEMBIST_ADDR,
	.bahama_setup                        = msm_bahama_setup_power,
	.bahama_shutdown                     = msm_bahama_shutdown_power,
	.bahama_core_config                  = msm_bahama_core_config,
	.fm				     = &marimba_fm_pdata,
};

#endif

#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
static struct i2c_board_info bahama_devices[] = {
{
	I2C_BOARD_INFO("marimba", 0xc),
	.platform_data = &marimba_pdata,
},
};
#endif

static struct msm_gpio qup_i2c_gpios_io[] = {
	{ GPIO_CFG(60, 0, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_8MA),
		"qup_scl" },
	{ GPIO_CFG(61, 0, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_8MA),
		"qup_sda" },
	{ GPIO_CFG(131, 0, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_8MA),
		"qup_scl" },
	{ GPIO_CFG(132, 0, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_8MA),
		"qup_sda" },
};

static struct msm_gpio qup_i2c_gpios_hw[] = {
	{ GPIO_CFG(60, 1, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_8MA),
		"qup_scl" },
	{ GPIO_CFG(61, 1, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_8MA),
		"qup_sda" },
	{ GPIO_CFG(131, 2, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_8MA),
		"qup_scl" },
	{ GPIO_CFG(132, 2, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_8MA),
		"qup_sda" },
};

static void gsbi_qup_i2c_gpio_config(int adap_id, int config_type)
{
	int rc;

	if (adap_id < 0 || adap_id > 1)
		return;

	/* Each adapter gets 2 lines from the table */
	if (config_type)
		rc = msm_gpios_request_enable(&qup_i2c_gpios_hw[adap_id*2], 2);
	else
		rc = msm_gpios_request_enable(&qup_i2c_gpios_io[adap_id*2], 2);
	if (rc < 0)
		pr_err("QUP GPIO request/enable failed: %d\n", rc);
}

static struct msm_i2c_platform_data msm_gsbi0_qup_i2c_pdata = {
	.clk_freq		= 100000,
	.msm_i2c_config_gpio	= gsbi_qup_i2c_gpio_config,
};

static struct msm_i2c_platform_data msm_gsbi1_qup_i2c_pdata = {
	.clk_freq		= 100000,
	.msm_i2c_config_gpio	= gsbi_qup_i2c_gpio_config,
};

#ifdef CONFIG_ARCH_MSM7X27A
#define MSM_PMEM_MDP_SIZE       0x1DD1000
#define MSM_PMEM_ADSP_SIZE      0x1000000

#ifdef CONFIG_FB_MSM_TRIPLE_BUFFER
#define MSM_FB_SIZE		0x260000
#else
#define MSM_FB_SIZE		0x195000
#endif

#endif

#if defined(CONFIG_TOUCHSCREEN_SYNAPTICS_RMI4_I2C) || \
defined(CONFIG_TOUCHSCREEN_SYNAPTICS_RMI4_I2C_MODULE)

#ifndef CLEARPAD3000_ATTEN_GPIO
#define CLEARPAD3000_ATTEN_GPIO (48)
#endif

#ifndef CLEARPAD3000_RESET_GPIO
#define CLEARPAD3000_RESET_GPIO (26)
#endif

static int synaptics_touchpad_setup(void);

static struct msm_gpio clearpad3000_cfg_data[] = {
	{GPIO_CFG(CLEARPAD3000_ATTEN_GPIO, 0, GPIO_CFG_INPUT,
			GPIO_CFG_NO_PULL, GPIO_CFG_6MA), "rmi4_attn"},
	{GPIO_CFG(CLEARPAD3000_RESET_GPIO, 0, GPIO_CFG_OUTPUT,
			GPIO_CFG_PULL_DOWN, GPIO_CFG_8MA), "rmi4_reset"},
};

static struct rmi_XY_pair rmi_offset = {.x = 0, .y = 0};
static struct rmi_range rmi_clipx = {.min = 48, .max = 980};
static struct rmi_range rmi_clipy = {.min = 7, .max = 1647};
static struct rmi_f11_functiondata synaptics_f11_data = {
	.swap_axes = false,
	.flipX = false,
	.flipY = false,
	.offset = &rmi_offset,
	.button_height = 113,
	.clipX = &rmi_clipx,
	.clipY = &rmi_clipy,
};

#define MAX_LEN		100

static ssize_t clearpad3000_virtual_keys_register(struct kobject *kobj,
		     struct kobj_attribute *attr, char *buf)
{
	char *virtual_keys = __stringify(EV_KEY) ":" __stringify(KEY_MENU) \
			     ":60:830:120:60" ":" __stringify(EV_KEY) \
			     ":" __stringify(KEY_HOME)   ":180:830:120:60" \
				":" __stringify(EV_KEY) ":" \
				__stringify(KEY_SEARCH) ":300:830:120:60" \
				":" __stringify(EV_KEY) ":" \
			__stringify(KEY_BACK)   ":420:830:120:60" "\n";

	return snprintf(buf, strnlen(virtual_keys, MAX_LEN) + 1 , "%s",
			virtual_keys);
}

static struct kobj_attribute clearpad3000_virtual_keys_attr = {
	.attr = {
		.name = "virtualkeys.sensor00fn11",
		.mode = S_IRUGO,
	},
	.show = &clearpad3000_virtual_keys_register,
};

static struct attribute *virtual_key_properties_attrs[] = {
	&clearpad3000_virtual_keys_attr.attr,
	NULL
};

static struct attribute_group virtual_key_properties_attr_group = {
	.attrs = virtual_key_properties_attrs,
};

struct kobject *virtual_key_properties_kobj;

static struct rmi_functiondata synaptics_functiondata[] = {
	{
		.function_index = RMI_F11_INDEX,
		.data = &synaptics_f11_data,
	},
};

static struct rmi_functiondata_list synaptics_perfunctiondata = {
	.count = ARRAY_SIZE(synaptics_functiondata),
	.functiondata = synaptics_functiondata,
};

static struct rmi_sensordata synaptics_sensordata = {
	.perfunctiondata = &synaptics_perfunctiondata,
	.rmi_sensor_setup	= synaptics_touchpad_setup,
};

static struct rmi_i2c_platformdata synaptics_platformdata = {
	.i2c_address = 0x2c,
	.irq_type = IORESOURCE_IRQ_LOWLEVEL,
	.sensordata = &synaptics_sensordata,
};

static struct i2c_board_info synaptic_i2c_clearpad3k[] = {
	{
	I2C_BOARD_INFO("rmi4_ts", 0x2c),
	.platform_data = &synaptics_platformdata,
	},
};

static int synaptics_touchpad_setup(void)
{
	int retval = 0;

	virtual_key_properties_kobj =
		kobject_create_and_add("board_properties", NULL);
	if (virtual_key_properties_kobj)
		retval = sysfs_create_group(virtual_key_properties_kobj,
				&virtual_key_properties_attr_group);
	if (!virtual_key_properties_kobj || retval)
		pr_err("failed to create ft5202 board_properties\n");

	retval = msm_gpios_request_enable(clearpad3000_cfg_data,
		    sizeof(clearpad3000_cfg_data)/sizeof(struct msm_gpio));
	if (retval) {
		pr_err("%s:Failed to obtain touchpad GPIO %d. Code: %d.",
				__func__, CLEARPAD3000_ATTEN_GPIO, retval);
		retval = 0; /* ignore the err */
	}
	synaptics_platformdata.irq = gpio_to_irq(CLEARPAD3000_ATTEN_GPIO);

	gpio_set_value(CLEARPAD3000_RESET_GPIO, 0);
	usleep(10000);
	gpio_set_value(CLEARPAD3000_RESET_GPIO, 1);
	usleep(50000);

	return retval;
}
#endif


static struct android_usb_platform_data android_usb_pdata = {
	.update_pid_and_serial_num = usb_diag_update_pid_and_serial_num,
};

static struct platform_device android_usb_device = {
	.name	= "android_usb",
	.id	= -1,
	.dev	= {
		.platform_data = &android_usb_pdata,
	},
};

#ifdef CONFIG_USB_EHCI_MSM_72K
static void msm_hsusb_vbus_power(unsigned phy_info, int on)
{
	int rc = 0;
	unsigned gpio;

	gpio = GPIO_HOST_VBUS_EN;

	rc = gpio_request(gpio,	"i2c_host_vbus_en");
	if (rc < 0) {
		pr_err("failed to request %d GPIO\n", gpio);
		return;
	}
	gpio_direction_output(gpio, !!on);
	gpio_set_value_cansleep(gpio, !!on);
	gpio_free(gpio);
}

static struct msm_usb_host_platform_data msm_usb_host_pdata = {
	.phy_info       = (USB_PHY_INTEGRATED | USB_PHY_MODEL_45NM),
};

static void __init msm7627a_init_host(void)
{
	msm_add_host(0, &msm_usb_host_pdata);
}
#endif

#ifdef CONFIG_USB_MSM_OTG_72K
static int hsusb_rpc_connect(int connect)
{
	if (connect)
		return msm_hsusb_rpc_connect();
	else
		return msm_hsusb_rpc_close();
}

static struct vreg *vreg_3p3;
static int msm_hsusb_ldo_init(int init)
{
	if (init) {
		vreg_3p3 = vreg_get(NULL, "usb");
		if (IS_ERR(vreg_3p3))
			return PTR_ERR(vreg_3p3);
	} else
		vreg_put(vreg_3p3);

	return 0;
}

static int msm_hsusb_ldo_enable(int enable)
{
	static int ldo_status;

	if (!vreg_3p3 || IS_ERR(vreg_3p3))
		return -ENODEV;

	if (ldo_status == enable)
		return 0;

	ldo_status = enable;

	if (enable)
		return vreg_enable(vreg_3p3);

	return vreg_disable(vreg_3p3);
}

#ifndef CONFIG_USB_EHCI_MSM_72K
static int msm_hsusb_pmic_notif_init(void (*callback)(int online), int init)
{
	int ret = 0;

	if (init)
		ret = msm_pm_app_rpc_init(callback);
	else
		msm_pm_app_rpc_deinit(callback);

	return ret;
}
#endif

static struct msm_otg_platform_data msm_otg_pdata = {
#ifndef CONFIG_USB_EHCI_MSM_72K
	.pmic_vbus_notif_init	 = msm_hsusb_pmic_notif_init,
#else
	.vbus_power		 = msm_hsusb_vbus_power,
#endif
	.rpc_connect		 = hsusb_rpc_connect,
	.core_clk		 = 1,
	.pemp_level		 = PRE_EMPHASIS_WITH_20_PERCENT,
	.cdr_autoreset		 = CDR_AUTO_RESET_DISABLE,
	.drv_ampl		 = HS_DRV_AMPLITUDE_DEFAULT,
	.se1_gating		 = SE1_GATING_DISABLE,
	.ldo_init		 = msm_hsusb_ldo_init,
	.ldo_enable		 = msm_hsusb_ldo_enable,
	.chg_init		 = hsusb_chg_init,
	.chg_connected		 = hsusb_chg_connected,
	.chg_vbus_draw		 = hsusb_chg_vbus_draw,
};
#endif

static struct msm_hsusb_gadget_platform_data msm_gadget_pdata = {
	.is_phy_status_timer_on = 1,
};

#if (defined(CONFIG_MMC_MSM_SDC1_SUPPORT)\
	|| defined(CONFIG_MMC_MSM_SDC2_SUPPORT)\
	|| defined(CONFIG_MMC_MSM_SDC3_SUPPORT)\
	|| defined(CONFIG_MMC_MSM_SDC4_SUPPORT))

static unsigned long vreg_sts, gpio_sts;
static struct vreg *vreg_mmc;
static struct vreg *vreg_emmc;

struct sdcc_vreg {
	struct vreg *vreg_data;
	unsigned level;
};

static struct sdcc_vreg sdcc_vreg_data[4];

struct sdcc_gpio {
	struct msm_gpio *cfg_data;
	uint32_t size;
	struct msm_gpio *sleep_cfg_data;
};

/**
 * Due to insufficient drive strengths for SDC GPIO lines some old versioned
 * SD/MMC cards may cause data CRC errors. Hence, set optimal values
 * for SDC slots based on timing closure and marginality. SDC1 slot
 * require higher value since it should handle bad signal quality due
 * to size of T-flash adapters.
 */
static struct msm_gpio sdc1_cfg_data[] = {
	{GPIO_CFG(51, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_14MA),
								"sdc1_dat_3"},
	{GPIO_CFG(52, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_14MA),
								"sdc1_dat_2"},
	{GPIO_CFG(53, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_14MA),
								"sdc1_dat_1"},
	{GPIO_CFG(54, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_14MA),
								"sdc1_dat_0"},
	{GPIO_CFG(55, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_14MA),
								"sdc1_cmd"},
	{GPIO_CFG(56, 1, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_14MA),
								"sdc1_clk"},
};

static struct msm_gpio sdc2_cfg_data[] = {
	{GPIO_CFG(62, 2, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_8MA),
								"sdc2_clk"},
	{GPIO_CFG(63, 2, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_10MA),
								"sdc2_cmd"},
	{GPIO_CFG(64, 2, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_10MA),
								"sdc2_dat_3"},
	{GPIO_CFG(65, 2, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_10MA),
								"sdc2_dat_2"},
	{GPIO_CFG(66, 2, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_10MA),
								"sdc2_dat_1"},
	{GPIO_CFG(67, 2, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_10MA),
								"sdc2_dat_0"},
};

static struct msm_gpio sdc2_sleep_cfg_data[] = {
	{GPIO_CFG(62, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
								"sdc2_clk"},
	{GPIO_CFG(63, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
								"sdc2_cmd"},
	{GPIO_CFG(64, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
								"sdc2_dat_3"},
	{GPIO_CFG(65, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
								"sdc2_dat_2"},
	{GPIO_CFG(66, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
								"sdc2_dat_1"},
	{GPIO_CFG(67, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
								"sdc2_dat_0"},
};
static struct msm_gpio sdc3_cfg_data[] = {
	{GPIO_CFG(88, 1, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_8MA),
								"sdc3_clk"},
	{GPIO_CFG(89, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_10MA),
								"sdc3_cmd"},
	{GPIO_CFG(90, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_10MA),
								"sdc3_dat_3"},
	{GPIO_CFG(91, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_10MA),
								"sdc3_dat_2"},
	{GPIO_CFG(92, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_10MA),
								"sdc3_dat_1"},
	{GPIO_CFG(93, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_10MA),
								"sdc3_dat_0"},
#ifdef CONFIG_MMC_MSM_SDC3_8_BIT_SUPPORT
	{GPIO_CFG(19, 3, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_10MA),
								"sdc3_dat_7"},
	{GPIO_CFG(20, 3, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_10MA),
								"sdc3_dat_6"},
	{GPIO_CFG(21, 3, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_10MA),
								"sdc3_dat_5"},
	{GPIO_CFG(108, 3, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_10MA),
								"sdc3_dat_4"},
#endif
};

static struct msm_gpio sdc4_cfg_data[] = {
	{GPIO_CFG(19, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_10MA),
								"sdc4_dat_3"},
	{GPIO_CFG(20, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_10MA),
								"sdc4_dat_2"},
	{GPIO_CFG(21, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_10MA),
								"sdc4_dat_1"},
	{GPIO_CFG(107, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_10MA),
								"sdc4_cmd"},
	{GPIO_CFG(108, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP, GPIO_CFG_10MA),
								"sdc4_dat_0"},
	{GPIO_CFG(109, 1, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_8MA),
								"sdc4_clk"},
};

static struct sdcc_gpio sdcc_cfg_data[] = {
	{
		.cfg_data = sdc1_cfg_data,
		.size = ARRAY_SIZE(sdc1_cfg_data),
	},
	{
		.cfg_data = sdc2_cfg_data,
		.size = ARRAY_SIZE(sdc2_cfg_data),
		.sleep_cfg_data = sdc2_sleep_cfg_data,
	},
	{
		.cfg_data = sdc3_cfg_data,
		.size = ARRAY_SIZE(sdc3_cfg_data),
	},
	{
		.cfg_data = sdc4_cfg_data,
		.size = ARRAY_SIZE(sdc4_cfg_data),
	},
};

static int msm_sdcc_setup_gpio(int dev_id, unsigned int enable)
{
	int rc = 0;
	struct sdcc_gpio *curr;

	curr = &sdcc_cfg_data[dev_id - 1];
	if (!(test_bit(dev_id, &gpio_sts)^enable))
		return rc;

	if (enable) {
		set_bit(dev_id, &gpio_sts);
		rc = msm_gpios_request_enable(curr->cfg_data, curr->size);
		if (rc)
			pr_err("%s: Failed to turn on GPIOs for slot %d\n",
					__func__,  dev_id);
	} else {
		clear_bit(dev_id, &gpio_sts);
		if (curr->sleep_cfg_data) {
			rc = msm_gpios_enable(curr->sleep_cfg_data, curr->size);
			msm_gpios_free(curr->sleep_cfg_data, curr->size);
			return rc;
		}
		msm_gpios_disable_free(curr->cfg_data, curr->size);
	}
	return rc;
}

static int msm_sdcc_setup_vreg(int dev_id, unsigned int enable)
{
	int rc = 0;
	struct sdcc_vreg *curr;

	curr = &sdcc_vreg_data[dev_id - 1];

	if (!(test_bit(dev_id, &vreg_sts)^enable))
		return rc;

	if (enable) {
		set_bit(dev_id, &vreg_sts);
		rc = vreg_set_level(curr->vreg_data, curr->level);
		if (rc)
			pr_err("%s: vreg_set_level() = %d\n", __func__, rc);

		rc = vreg_enable(curr->vreg_data);
		if (rc)
			pr_err("%s: vreg_enable() = %d\n", __func__, rc);
	} else {
		clear_bit(dev_id, &vreg_sts);
		rc = vreg_disable(curr->vreg_data);
		if (rc)
			pr_err("%s: vreg_disable() = %d\n", __func__, rc);
	}
	return rc;
}

static uint32_t msm_sdcc_setup_power(struct device *dv, unsigned int vdd)
{
	int rc = 0;
	struct platform_device *pdev;

	pdev = container_of(dv, struct platform_device, dev);

	rc = msm_sdcc_setup_gpio(pdev->id, !!vdd);
	if (rc)
		goto out;

	rc = msm_sdcc_setup_vreg(pdev->id, !!vdd);
out:
	return rc;
}

#define GPIO_SDC1_HW_DET 42

#if defined(CONFIG_MMC_MSM_SDC1_SUPPORT) \
	&& defined(CONFIG_MMC_MSM_CARD_HW_DETECTION)
static unsigned int msm7627a_sdcc_slot_status(struct device *dev)
{
	int status;

	status = gpio_tlmm_config(GPIO_CFG(GPIO_SDC1_HW_DET, 2, GPIO_CFG_INPUT,
			GPIO_CFG_PULL_UP, GPIO_CFG_8MA), GPIO_CFG_ENABLE);
	if (status)
		pr_err("%s:Failed to configure tlmm for GPIO %d\n", __func__,
				GPIO_SDC1_HW_DET);

	status = gpio_request(GPIO_SDC1_HW_DET, "SD_HW_Detect");
	if (status) {
		pr_err("%s:Failed to request GPIO %d\n", __func__,
				GPIO_SDC1_HW_DET);
	} else {
		status = gpio_direction_input(GPIO_SDC1_HW_DET);
		if (!status)
			status = !gpio_get_value(GPIO_SDC1_HW_DET);
		gpio_free(GPIO_SDC1_HW_DET);
	}
	return status;
}
#endif

#ifdef CONFIG_MMC_MSM_SDC1_SUPPORT
static struct mmc_platform_data sdc1_plat_data = {
	.ocr_mask	= MMC_VDD_28_29,
	.translate_vdd  = msm_sdcc_setup_power,
	.mmc_bus_width  = MMC_CAP_4_BIT_DATA,
	.msmsdcc_fmin	= 144000,
	.msmsdcc_fmid	= 24576000,
	.msmsdcc_fmax	= 49152000,
#ifdef CONFIG_MMC_MSM_CARD_HW_DETECTION
	.status      = msm7627a_sdcc_slot_status,
	.status_irq  = MSM_GPIO_TO_INT(GPIO_SDC1_HW_DET),
	.irq_flags   = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
#endif
};
#endif

#ifdef CONFIG_MMC_MSM_SDC2_SUPPORT
static struct mmc_platform_data sdc2_plat_data = {
	/*
	 * SDC2 supports only 1.8V, claim for 2.85V range is just
	 * for allowing buggy cards who advertise 2.8V even though
	 * they can operate at 1.8V supply.
	 */
	.ocr_mask	= MMC_VDD_28_29 | MMC_VDD_165_195,
	.translate_vdd  = msm_sdcc_setup_power,
	.mmc_bus_width  = MMC_CAP_4_BIT_DATA,
#ifdef CONFIG_MMC_MSM_SDIO_SUPPORT
	.sdiowakeup_irq = MSM_GPIO_TO_INT(66),
#endif
	.msmsdcc_fmin	= 144000,
	.msmsdcc_fmid	= 24576000,
	.msmsdcc_fmax	= 49152000,
#ifdef CONFIG_MMC_MSM_SDC2_DUMMY52_REQUIRED
	.dummy52_required = 1,
#endif
};
#endif

#ifdef CONFIG_MMC_MSM_SDC3_SUPPORT
static struct mmc_platform_data sdc3_plat_data = {
	.ocr_mask	= MMC_VDD_28_29,
	.translate_vdd  = msm_sdcc_setup_power,
#ifdef CONFIG_MMC_MSM_SDC3_8_BIT_SUPPORT
	.mmc_bus_width  = MMC_CAP_8_BIT_DATA,
#else
	.mmc_bus_width  = MMC_CAP_4_BIT_DATA,
#endif
	.msmsdcc_fmin	= 144000,
	.msmsdcc_fmid	= 24576000,
	.msmsdcc_fmax	= 49152000,
	.nonremovable	= 1,
};
#endif

#if (defined(CONFIG_MMC_MSM_SDC4_SUPPORT)\
		&& !defined(CONFIG_MMC_MSM_SDC3_8_BIT_SUPPORT))
static struct mmc_platform_data sdc4_plat_data = {
	.ocr_mask	= MMC_VDD_28_29,
	.translate_vdd  = msm_sdcc_setup_power,
	.mmc_bus_width  = MMC_CAP_4_BIT_DATA,
	.msmsdcc_fmin	= 144000,
	.msmsdcc_fmid	= 24576000,
	.msmsdcc_fmax	= 49152000,
};
#endif
#endif

#ifdef CONFIG_SERIAL_MSM_HS
static struct msm_serial_hs_platform_data msm_uart_dm1_pdata = {
	.inject_rx_on_wakeup	= 1,
	.rx_to_inject		= 0xFD,
};
#endif
static struct msm_pm_platform_data msm7627a_pm_data[MSM_PM_SLEEP_MODE_NR] = {
	[MSM_PM_SLEEP_MODE_POWER_COLLAPSE] = {
					.idle_supported = 1,
					.suspend_supported = 1,
					.idle_enabled = 1,
					.suspend_enabled = 1,
					.latency = 16000,
					.residency = 20000,
	},
	[MSM_PM_SLEEP_MODE_POWER_COLLAPSE_NO_XO_SHUTDOWN] = {
					.idle_supported = 1,
					.suspend_supported = 1,
					.idle_enabled = 1,
					.suspend_enabled = 1,
					.latency = 12000,
					.residency = 20000,
	},
	[MSM_PM_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT] = {
					.idle_supported = 1,
					.suspend_supported = 1,
					.idle_enabled = 0,
					.suspend_enabled = 1,
					.latency = 2000,
					.residency = 0,
	},
	[MSM_PM_SLEEP_MODE_WAIT_FOR_INTERRUPT] = {
					.idle_supported = 1,
					.suspend_supported = 1,
					.idle_enabled = 1,
					.suspend_enabled = 1,
					.latency = 2,
					.residency = 0,
	},
};

static struct android_pmem_platform_data android_pmem_adsp_pdata = {
	.name = "pmem_adsp",
	.allocator_type = PMEM_ALLOCATORTYPE_BITMAP,
	.cached = 1,
	.memory_type = MEMTYPE_EBI1,
};

static struct platform_device android_pmem_adsp_device = {
	.name = "android_pmem",
	.id = 1,
	.dev = { .platform_data = &android_pmem_adsp_pdata },
};

static unsigned pmem_mdp_size = MSM_PMEM_MDP_SIZE;
static int __init pmem_mdp_size_setup(char *p)
{
	pmem_mdp_size = memparse(p, NULL);
	return 0;
}

early_param("pmem_mdp_size", pmem_mdp_size_setup);

static unsigned pmem_adsp_size = MSM_PMEM_ADSP_SIZE;
static int __init pmem_adsp_size_setup(char *p)
{
	pmem_adsp_size = memparse(p, NULL);
	return 0;
}

early_param("pmem_adsp_size", pmem_adsp_size_setup);

static unsigned fb_size = MSM_FB_SIZE;
static int __init fb_size_setup(char *p)
{
	fb_size = memparse(p, NULL);
	return 0;
}

early_param("fb_size", fb_size_setup);

static struct resource msm_fb_resources[] = {
	{
		.flags	= IORESOURCE_DMA,
	}
};

static int msm_fb_detect_panel(const char *name)
{
	int ret;

	if (!strncmp(name, "mipi_video_truly_wvga", 21))
		ret = 0;
	else
		ret = -ENODEV;

	return ret;
}

static int mipi_truly_set_bl(int on)
{
	gpio_set_value_cansleep(GPIO_BACKLIGHT_EN, !!on);

	return 1;
}

static struct msm_fb_platform_data msm_fb_pdata = {
	.detect_client = msm_fb_detect_panel,
};

static struct platform_device msm_fb_device = {
	.name   = "msm_fb",
	.id     = 0,
	.num_resources  = ARRAY_SIZE(msm_fb_resources),
	.resource       = msm_fb_resources,
	.dev    = {
		.platform_data = &msm_fb_pdata,
	}
};

static struct msm_panel_common_pdata mipi_truly_pdata = {
	.pmic_backlight = mipi_truly_set_bl,
};

static struct platform_device mipi_dsi_truly_panel_device = {
	.name	= "mipi_truly",
	.id	= 0,
	.dev	= {
		.platform_data = &mipi_truly_pdata,
	}
};

static void __init msm7627a_init_mmc(void)
{
	vreg_emmc = vreg_get(NULL, "emmc");
	if (IS_ERR(vreg_emmc)) {
		pr_err("%s: vreg get failed (%ld)\n",
				__func__, PTR_ERR(vreg_emmc));
		return;
	}

	vreg_mmc = vreg_get(NULL, "mmc");
	if (IS_ERR(vreg_mmc)) {
		pr_err("%s: vreg get failed (%ld)\n",
				__func__, PTR_ERR(vreg_mmc));
		return;
	}

	/* eMMC slot */
#ifdef CONFIG_MMC_MSM_SDC3_SUPPORT
	sdcc_vreg_data[2].vreg_data = vreg_emmc;
	sdcc_vreg_data[2].level = 3000;
	msm_add_sdcc(3, &sdc3_plat_data);
#endif
	/* Micro-SD slot */
#ifdef CONFIG_MMC_MSM_SDC1_SUPPORT
	sdcc_vreg_data[0].vreg_data = vreg_mmc;
	sdcc_vreg_data[0].level = 2850;
	msm_add_sdcc(1, &sdc1_plat_data);
#endif
	/* SDIO WLAN slot */
#ifdef CONFIG_MMC_MSM_SDC2_SUPPORT
	sdcc_vreg_data[1].vreg_data = vreg_mmc;
	sdcc_vreg_data[1].level = 2850;
	msm_add_sdcc(2, &sdc2_plat_data);
#endif
	/* Not Used */
#if (defined(CONFIG_MMC_MSM_SDC4_SUPPORT)\
		&& !defined(CONFIG_MMC_MSM_SDC3_8_BIT_SUPPORT))
	sdcc_vreg_data[3].vreg_data = vreg_mmc;
	sdcc_vreg_data[3].level = 2850;
	msm_add_sdcc(4, &sdc4_plat_data);
#endif
}

#define SND(desc, num) { .name = #desc, .id = num }
static struct snd_endpoint snd_endpoints_list[] = {
	SND(HANDSET, 0),
	SND(MONO_HEADSET, 2),
	SND(HEADSET, 3),
	SND(SPEAKER, 6),
	SND(TTY_HEADSET, 8),
	SND(TTY_VCO, 9),
	SND(TTY_HCO, 10),
	SND(BT, 12),
	SND(IN_S_SADC_OUT_HANDSET, 16),
	SND(IN_S_SADC_OUT_SPEAKER_PHONE, 25),
	SND(FM_DIGITAL_STEREO_HEADSET, 26),
	SND(FM_DIGITAL_SPEAKER_PHONE, 27),
	SND(FM_DIGITAL_BT_A2DP_HEADSET, 28),
	SND(STEREO_HEADSET_AND_SPEAKER, 31),
	SND(CURRENT, 0x7FFFFFFE),
	SND(FM_ANALOG_STEREO_HEADSET, 35),
	SND(FM_ANALOG_STEREO_HEADSET_CODEC, 36),
};
#undef SND

static struct msm_snd_endpoints msm_device_snd_endpoints = {
	.endpoints = snd_endpoints_list,
	.num = sizeof(snd_endpoints_list) / sizeof(struct snd_endpoint)
};

static struct platform_device msm_device_snd = {
	.name = "msm_snd",
	.id = -1,
	.dev    = {
		.platform_data = &msm_device_snd_endpoints
	},
};

#define DEC0_FORMAT ((1<<MSM_ADSP_CODEC_MP3)| \
	(1<<MSM_ADSP_CODEC_AAC)|(1<<MSM_ADSP_CODEC_WMA)| \
	(1<<MSM_ADSP_CODEC_WMAPRO)|(1<<MSM_ADSP_CODEC_AMRWB)| \
	(1<<MSM_ADSP_CODEC_AMRNB)|(1<<MSM_ADSP_CODEC_WAV)| \
	(1<<MSM_ADSP_CODEC_ADPCM)|(1<<MSM_ADSP_CODEC_YADPCM)| \
	(1<<MSM_ADSP_CODEC_EVRC)|(1<<MSM_ADSP_CODEC_QCELP))
#define DEC1_FORMAT ((1<<MSM_ADSP_CODEC_MP3)| \
	(1<<MSM_ADSP_CODEC_AAC)|(1<<MSM_ADSP_CODEC_WMA)| \
	(1<<MSM_ADSP_CODEC_WMAPRO)|(1<<MSM_ADSP_CODEC_AMRWB)| \
	(1<<MSM_ADSP_CODEC_AMRNB)|(1<<MSM_ADSP_CODEC_WAV)| \
	(1<<MSM_ADSP_CODEC_ADPCM)|(1<<MSM_ADSP_CODEC_YADPCM)| \
	(1<<MSM_ADSP_CODEC_EVRC)|(1<<MSM_ADSP_CODEC_QCELP))
#define DEC2_FORMAT ((1<<MSM_ADSP_CODEC_MP3)| \
	(1<<MSM_ADSP_CODEC_AAC)|(1<<MSM_ADSP_CODEC_WMA)| \
	(1<<MSM_ADSP_CODEC_WMAPRO)|(1<<MSM_ADSP_CODEC_AMRWB)| \
	(1<<MSM_ADSP_CODEC_AMRNB)|(1<<MSM_ADSP_CODEC_WAV)| \
	(1<<MSM_ADSP_CODEC_ADPCM)|(1<<MSM_ADSP_CODEC_YADPCM)| \
	(1<<MSM_ADSP_CODEC_EVRC)|(1<<MSM_ADSP_CODEC_QCELP))
#define DEC3_FORMAT ((1<<MSM_ADSP_CODEC_MP3)| \
	(1<<MSM_ADSP_CODEC_AAC)|(1<<MSM_ADSP_CODEC_WMA)| \
	(1<<MSM_ADSP_CODEC_WMAPRO)|(1<<MSM_ADSP_CODEC_AMRWB)| \
	(1<<MSM_ADSP_CODEC_AMRNB)|(1<<MSM_ADSP_CODEC_WAV)| \
	(1<<MSM_ADSP_CODEC_ADPCM)|(1<<MSM_ADSP_CODEC_YADPCM)| \
	(1<<MSM_ADSP_CODEC_EVRC)|(1<<MSM_ADSP_CODEC_QCELP))
#define DEC4_FORMAT (1<<MSM_ADSP_CODEC_MIDI)

static unsigned int dec_concurrency_table[] = {
	/* Audio LP */
	(DEC0_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DMA)), 0,
	0, 0, 0,

	/* Concurrency 1 */
	(DEC0_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC1_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC2_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC3_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC4_FORMAT),

	 /* Concurrency 2 */
	(DEC0_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC1_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC2_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC3_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC4_FORMAT),

	/* Concurrency 3 */
	(DEC0_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC1_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC2_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC3_FORMAT|(1<<MSM_ADSP_MODE_NONTUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC4_FORMAT),

	/* Concurrency 4 */
	(DEC0_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC1_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC2_FORMAT|(1<<MSM_ADSP_MODE_NONTUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC3_FORMAT|(1<<MSM_ADSP_MODE_NONTUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC4_FORMAT),

	/* Concurrency 5 */
	(DEC0_FORMAT|(1<<MSM_ADSP_MODE_TUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC1_FORMAT|(1<<MSM_ADSP_MODE_NONTUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC2_FORMAT|(1<<MSM_ADSP_MODE_NONTUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC3_FORMAT|(1<<MSM_ADSP_MODE_NONTUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC4_FORMAT),

	/* Concurrency 6 */
	(DEC0_FORMAT|(1<<MSM_ADSP_MODE_NONTUNNEL)|(1<<MSM_ADSP_OP_DM)),
	0, 0, 0, 0,

	/* Concurrency 7 */
	(DEC0_FORMAT|(1<<MSM_ADSP_MODE_NONTUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC1_FORMAT|(1<<MSM_ADSP_MODE_NONTUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC2_FORMAT|(1<<MSM_ADSP_MODE_NONTUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC3_FORMAT|(1<<MSM_ADSP_MODE_NONTUNNEL)|(1<<MSM_ADSP_OP_DM)),
	(DEC4_FORMAT),
};

#define DEC_INFO(name, queueid, decid, nr_codec) { .module_name = name, \
	.module_queueid = queueid, .module_decid = decid, \
	.nr_codec_support = nr_codec}

static struct msm_adspdec_info dec_info_list[] = {
	DEC_INFO("AUDPLAY0TASK", 13, 0, 11), /* AudPlay0BitStreamCtrlQueue */
	DEC_INFO("AUDPLAY1TASK", 14, 1, 11),  /* AudPlay1BitStreamCtrlQueue */
	DEC_INFO("AUDPLAY2TASK", 15, 2, 11),  /* AudPlay2BitStreamCtrlQueue */
	DEC_INFO("AUDPLAY3TASK", 16, 3, 11),  /* AudPlay3BitStreamCtrlQueue */
	DEC_INFO("AUDPLAY4TASK", 17, 4, 1),  /* AudPlay4BitStreamCtrlQueue */
};

static struct msm_adspdec_database msm_device_adspdec_database = {
	.num_dec = ARRAY_SIZE(dec_info_list),
	.num_concurrency_support = (ARRAY_SIZE(dec_concurrency_table) / \
					ARRAY_SIZE(dec_info_list)),
	.dec_concurrency_table = dec_concurrency_table,
	.dec_info_list = dec_info_list,
};

static struct platform_device msm_device_adspdec = {
	.name = "msm_adspdec",
	.id = -1,
	.dev    = {
		.platform_data = &msm_device_adspdec_database
	},
};

static struct android_pmem_platform_data android_pmem_audio_pdata = {
	.name = "pmem_audio",
	.allocator_type = PMEM_ALLOCATORTYPE_BITMAP,
	.cached = 0,
	.memory_type = MEMTYPE_EBI1,
};

static struct platform_device android_pmem_audio_device = {
	.name = "android_pmem",
	.id = 2,
	.dev = { .platform_data = &android_pmem_audio_pdata },
};

static struct android_pmem_platform_data android_pmem_pdata = {
	.name = "pmem",
	.allocator_type = PMEM_ALLOCATORTYPE_BITMAP,
	.cached = 1,
	.memory_type = MEMTYPE_EBI1,
};
static struct platform_device android_pmem_device = {
	.name = "android_pmem",
	.id = 0,
	.dev = { .platform_data = &android_pmem_pdata },
};

static u32 msm_calculate_batt_capacity(u32 current_voltage);

static struct msm_psy_batt_pdata msm_psy_batt_data = {
	.voltage_min_design     = 2800,
	.voltage_max_design     = 4300,
	.avail_chg_sources      = AC_CHG | USB_CHG ,
	.batt_technology        = POWER_SUPPLY_TECHNOLOGY_LION,
	.calculate_capacity     = &msm_calculate_batt_capacity,
};

static u32 msm_calculate_batt_capacity(u32 current_voltage)
{
	u32 low_voltage	 = msm_psy_batt_data.voltage_min_design;
	u32 high_voltage = msm_psy_batt_data.voltage_max_design;

	return (current_voltage - low_voltage) * 100
			/ (high_voltage - low_voltage);
}

static struct platform_device msm_batt_device = {
	.name               = "msm-battery",
	.id                 = -1,
	.dev.platform_data  = &msm_psy_batt_data,
};

#ifdef CONFIG_MSM_CAMERA
static uint32_t camera_off_gpio_table[] = {
	GPIO_CFG(15, 0, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
};

static uint32_t camera_on_gpio_table[] = {
	GPIO_CFG(15, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
};

static void qrd1_camera_gpio_cfg(void)
{

	int rc = 0;

	rc = gpio_request(GPIO_CAM_5MP_SHDN_EN, "ov5640");
	if (rc < 0)
		pr_err("%s: gpio_request---GPIO_CAM_5MP_SHDN_EN failed!",
				__func__);


	rc = gpio_tlmm_config(GPIO_CFG(GPIO_CAM_5MP_SHDN_EN, 0,
				GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP,
				GPIO_CFG_2MA), GPIO_CFG_ENABLE);
	if (rc < 0) {
		pr_err("%s: unable to enable Power Down gpio for main"
				"camera!\n", __func__);
		gpio_free(GPIO_CAM_5MP_SHDN_EN);
	}


	rc = gpio_request(GPIO_CAM_5MP_RESET, "ov5640");
	if (rc < 0) {
		pr_err("%s: gpio_request---GPIO_CAM_5MP_RESET failed!",
				__func__);
		gpio_free(GPIO_CAM_5MP_SHDN_EN);
	}


	rc = gpio_tlmm_config(GPIO_CFG(GPIO_CAM_5MP_RESET, 0,
				GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP,
				GPIO_CFG_2MA), GPIO_CFG_ENABLE);
	if (rc < 0) {
		pr_err("%s: unable to enable reset gpio for main camera!\n",
				__func__);
		gpio_free(GPIO_CAM_5MP_RESET);
	}

	rc = gpio_request(GPIO_CAM_3MP_PWDN, "ov7692");
	if (rc < 0)
		pr_err("%s: gpio_request---GPIO_CAM_3MP_PWDN failed!",
				__func__);

	rc = gpio_tlmm_config(GPIO_CFG(GPIO_CAM_3MP_PWDN, 0,
				GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP,
				GPIO_CFG_2MA), GPIO_CFG_ENABLE);
	if (rc < 0) {
		pr_err("%s: unable to enable Power Down gpio for front"
				"camera!\n", __func__);
		gpio_free(GPIO_CAM_3MP_PWDN);
	}

	gpio_direction_output(GPIO_CAM_5MP_SHDN_EN, 1);
	gpio_direction_output(GPIO_CAM_5MP_RESET, 1);
	gpio_direction_output(GPIO_CAM_3MP_PWDN, 1);
}

#endif
static struct vreg *vreg_gp1;
static struct vreg *vreg_gp2;
static struct vreg *vreg_gp3;
static void msm_camera_vreg_config(int vreg_en)
{
	int rc;

	if (vreg_gp1 == NULL) {
		vreg_gp1 = vreg_get(NULL, "msme1");
		if (IS_ERR(vreg_gp1)) {
			pr_err("%s: vreg_get(%s) failed (%ld)\n",
				__func__, "msme1", PTR_ERR(vreg_gp1));
			return;
		}

		rc = vreg_set_level(vreg_gp1, 1800);
		if (rc) {
			pr_err("%s: GP1 set_level failed (%d)\n",
				__func__, rc);
			return;
		}
	}

	if (vreg_gp2 == NULL) {
		vreg_gp2 = vreg_get(NULL, "gp2");
		if (IS_ERR(vreg_gp2)) {
			pr_err("%s: vreg_get(%s) failed (%ld)\n",
				__func__, "gp2", PTR_ERR(vreg_gp2));
			return;
		}

		rc = vreg_set_level(vreg_gp2, 2850);
		if (rc) {
			pr_err("%s: GP2 set_level failed (%d)\n",
				__func__, rc);
		}
	}

	if (vreg_gp3 == NULL) {
		vreg_gp3 = vreg_get(NULL, "usb2");
		if (IS_ERR(vreg_gp3)) {
			pr_err("%s: vreg_get(%s) failed (%ld)\n",
				__func__, "gp3", PTR_ERR(vreg_gp3));
			return;
		}

		rc = vreg_set_level(vreg_gp3, 1800);
		if (rc) {
			pr_err("%s: GP3 set level failed (%d)\n",
				__func__, rc);
		}
	}

	if (vreg_en) {
		rc = vreg_enable(vreg_gp1);
		if (rc) {
			pr_err("%s: GP1 enable failed (%d)\n",
				__func__, rc);
			return;
		}

		rc = vreg_enable(vreg_gp2);
		if (rc) {
			pr_err("%s: GP2 enable failed (%d)\n",
				__func__, rc);
		}

		rc = vreg_enable(vreg_gp3);
		if (rc) {
			pr_err("%s: GP3 enable failed (%d)\n",
				__func__, rc);
		}
	} else {
		rc = vreg_disable(vreg_gp1);
		if (rc)
			pr_err("%s: GP1 disable failed (%d)\n",
				__func__, rc);

		rc = vreg_disable(vreg_gp2);
		if (rc) {
			pr_err("%s: GP2 disable failed (%d)\n",
				__func__, rc);
		}

		rc = vreg_disable(vreg_gp3);
		if (rc) {
			pr_err("%s: GP3 disable failed (%d)\n",
				__func__, rc);
		}
	}
}

static int config_gpio_table(uint32_t *table, int len)
{
	int rc = 0, i = 0;

	for (i = 0; i < len; i++) {
		rc = gpio_tlmm_config(table[i], GPIO_CFG_ENABLE);
		if (rc) {
			pr_err("%s not able to get gpio\n", __func__);
			for (i--; i >= 0; i--)
				gpio_tlmm_config(camera_off_gpio_table[i],
							GPIO_CFG_ENABLE);
			break;
		}
	}
	return rc;
}

static int config_camera_on_gpios_rear(void)
{
	int rc = 0;

	msm_camera_vreg_config(1);

	rc = config_gpio_table(camera_on_gpio_table,
			ARRAY_SIZE(camera_on_gpio_table));
	if (rc < 0) {
		pr_err("%s: CAMSENSOR gpio table request"
		"failed\n", __func__);
		return rc;
	}

	return rc;
}

static void config_camera_off_gpios_rear(void)
{
	msm_camera_vreg_config(0);
	config_gpio_table(camera_off_gpio_table,
			ARRAY_SIZE(camera_off_gpio_table));
}

static int config_camera_on_gpios_front(void)
{
	int rc = 0;

	msm_camera_vreg_config(1);

	rc = config_gpio_table(camera_on_gpio_table,
			ARRAY_SIZE(camera_on_gpio_table));
	if (rc < 0) {
		pr_err("%s: CAMSENSOR gpio table request"
			"failed\n", __func__);
		return rc;
	}

	return rc;
}

static void config_camera_off_gpios_front(void)
{
	msm_camera_vreg_config(0);

	config_gpio_table(camera_off_gpio_table,
			ARRAY_SIZE(camera_off_gpio_table));
}

struct msm_camera_device_platform_data msm_camera_data_rear = {
	.camera_gpio_on		= config_camera_on_gpios_rear,
	.camera_gpio_off	= config_camera_off_gpios_rear,
	.ioext.csiphy		= 0xA1000000,
	.ioext.csisz		= 0x00100000,
	.ioext.csiirq		= INT_CSI_IRQ_1,
	.ioclk.mclk_clk_rate	= 24000000,
	.ioclk.vfe_clk_rate	= 192000000,
	.ioext.appphy		= MSM_CLK_CTL_PHYS,
	.ioext.appsz		= MSM_CLK_CTL_SIZE,
};

struct msm_camera_device_platform_data msm_camera_data_front = {
	.camera_gpio_on		= config_camera_on_gpios_front,
	.camera_gpio_off	= config_camera_off_gpios_front,
	.ioext.csiphy		= 0xA0F00000,
	.ioext.csisz		= 0x00100000,
	.ioext.csiirq		= INT_CSI_IRQ_0,
	.ioclk.mclk_clk_rate	= 24000000,
	.ioclk.vfe_clk_rate	= 192000000,
	.ioext.appphy		= MSM_CLK_CTL_PHYS,
	.ioext.appsz		= MSM_CLK_CTL_SIZE,
};

#ifdef CONFIG_OV5640
static struct msm_camera_sensor_platform_info ov5640_sensor_info = {
	.mount_angle	= 90
};

static struct msm_camera_sensor_flash_src msm_flash_src_ov5640 = {
	.flash_sr_type = MSM_CAMERA_FLASH_SRC_LED,
	._fsrc.led_src.led_name = "flashlight",
	._fsrc.led_src.led_name_len = 10,
};

static struct msm_camera_sensor_flash_data flash_ov5640 = {
	.flash_type	= MSM_CAMERA_FLASH_LED,
	.flash_src	= &msm_flash_src_ov5640,
};

static struct msm_camera_sensor_info msm_camera_sensor_ov5640_data = {
	.sensor_name		= "ov5640",
	.sensor_reset_enable	= 1,
	.sensor_reset		= GPIO_CAM_5MP_RESET,
	.sensor_pwd		= GPIO_CAM_5MP_SHDN_EN,
	.vcm_pwd		= 0,
	.vcm_enable		= 0,
	.pdata			= &msm_camera_data_rear,
	.flash_data		= &flash_ov5640,
	.sensor_platform_info	= &ov5640_sensor_info,
	.csi_if			= 1,
};

static struct platform_device msm_camera_sensor_ov5640 = {
	.name	= "msm_camera_ov5640",
	.dev	= {
		.platform_data = &msm_camera_sensor_ov5640_data,
	},
};
#endif

#ifdef CONFIG_WEBCAM_OV7692_QRD
static struct msm_camera_sensor_platform_info ov7692_sensor_7627a_info = {
	.mount_angle = 90
};

static struct msm_camera_sensor_flash_data flash_ov7692 = {
	.flash_type	= MSM_CAMERA_FLASH_NONE,
};

static struct msm_camera_sensor_info msm_camera_sensor_ov7692_data = {
	.sensor_name		= "ov7692",
	.sensor_reset_enable	= 0,
	.sensor_reset		= 0,
	.sensor_pwd		= GPIO_CAM_3MP_PWDN,
	.vcm_pwd		= 0,
	.vcm_enable		= 0,
	.pdata			= &msm_camera_data_front,
	.flash_data		= &flash_ov7692,
	.sensor_platform_info   = &ov7692_sensor_7627a_info,
	.csi_if			= 1,
};

static struct platform_device msm_camera_sensor_ov7692 = {
	.name	= "msm_camera_ov7692",
	.dev	= {
		.platform_data = &msm_camera_sensor_ov7692_data,
	},
};
#endif

static struct i2c_board_info i2c_camera_devices[] = {
	#ifdef CONFIG_OV5640
	{
		I2C_BOARD_INFO("ov5640", 0x78 >> 1),
	},
	#endif
	#ifdef CONFIG_WEBCAM_OV7692_QRD
	{
		I2C_BOARD_INFO("ov7692", 0x78),
	},
	#endif
};
static struct platform_device *qrd1_devices[] __initdata = {
	&msm_device_dmov,
	&msm_device_smd,
	&msm_device_uart1,
	&msm_device_uart_dm1,
	&msm_gsbi0_qup_i2c_device,
	&msm_gsbi1_qup_i2c_device,
	&msm_device_otg,
	&msm_device_gadget_peripheral,
	&android_usb_device,
	&android_pmem_device,
	&android_pmem_adsp_device,
	&msm_fb_device,
	&android_pmem_audio_device,
	&msm_device_snd,
	&msm_device_adspdec,
	&msm_batt_device,
#ifdef CONFIG_OV5640
	&msm_camera_sensor_ov5640,
#endif
#ifdef CONFIG_WEBCAM_OV7692_QRD
	&msm_camera_sensor_ov7692,
#endif
	&msm_kgsl_3d0,
#ifdef CONFIG_BT
	&msm_bt_power_device,
#endif
	&mipi_dsi_truly_panel_device,
	&msm_wlan_ar6000_pm_device,
	&asoc_msm_pcm,
	&asoc_msm_dai0,
	&asoc_msm_dai1,
};

static unsigned pmem_kernel_ebi1_size = PMEM_KERNEL_EBI1_SIZE;
static int __init pmem_kernel_ebi1_size_setup(char *p)
{
	pmem_kernel_ebi1_size = memparse(p, NULL);
	return 0;
}
early_param("pmem_kernel_ebi1_size", pmem_kernel_ebi1_size_setup);

static unsigned pmem_audio_size = MSM_PMEM_AUDIO_SIZE;
static int __init pmem_audio_size_setup(char *p)
{
	pmem_audio_size = memparse(p, NULL);
	return 0;
}
early_param("pmem_audio_size", pmem_audio_size_setup);

static void __init msm_msm7627a_allocate_memory_regions(void)
{
	void *addr;
	unsigned long size;

	size = fb_size ? : MSM_FB_SIZE;
	addr = alloc_bootmem_align(size, 0x1000);
	msm_fb_resources[0].start = __pa(addr);
	msm_fb_resources[0].end = msm_fb_resources[0].start + size - 1;
	pr_info("allocating %lu bytes at %p (%lx physical) for fb\n", size,
						addr, __pa(addr));
}

static struct memtype_reserve msm7627a_reserve_table[] __initdata = {
	[MEMTYPE_SMI] = {
	},
	[MEMTYPE_EBI0] = {
		.flags	=	MEMTYPE_FLAGS_1M_ALIGN,
	},
	[MEMTYPE_EBI1] = {
		.flags	=	MEMTYPE_FLAGS_1M_ALIGN,
	},
};

static struct msm_panel_common_pdata mdp_pdata = {
	.gpio = 97,
	.mdp_rev = MDP_REV_303,
};

#define GPIO_LCDC_BRDG_PD      128
#define GPIO_LCDC_BRDG_RESET_N 129
#define GPIO_LCD_DSI_SEL 125

static unsigned mipi_dsi_gpio[] = {
		GPIO_CFG(GPIO_LCDC_BRDG_RESET_N, 0, GPIO_CFG_OUTPUT,
		GPIO_CFG_NO_PULL, GPIO_CFG_2MA), /* LCDC_BRDG_RESET_N */
		GPIO_CFG(GPIO_LCDC_BRDG_PD, 0, GPIO_CFG_OUTPUT,
		GPIO_CFG_NO_PULL, GPIO_CFG_2MA), /* LCDC_BRDG_PD */
};

static unsigned lcd_dsi_sel_gpio[] = {
	GPIO_CFG(GPIO_LCD_DSI_SEL, 0, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP,
			GPIO_CFG_2MA),
};

enum {
	DSI_SINGLE_LANE = 1,
	DSI_TWO_LANES,
};

static int msm_fb_get_lane_config(void)
{
	pr_info("DSI_TWO_LANES\n");
	return DSI_TWO_LANES;
}

static int mipi_truly_sel_mode(int video_mode)
{
	int rc = 0;

	rc = gpio_request(GPIO_LCD_DSI_SEL, "lcd_dsi_sel");
	if (rc < 0)
		goto gpio_error;

	rc = gpio_tlmm_config(lcd_dsi_sel_gpio[0], GPIO_CFG_ENABLE);
	if (rc)
		goto gpio_error;

	rc = gpio_direction_output(GPIO_LCD_DSI_SEL, 1);
	if (!rc) {
		gpio_set_value_cansleep(GPIO_LCD_DSI_SEL, video_mode);
		return rc;
	} else {
		goto gpio_error;
	}

gpio_error:
	pr_err("mipi_truly_sel_mode failed\n");
	gpio_free(GPIO_LCD_DSI_SEL);
	return rc;
}

static int msm_fb_dsi_client_qrd1_reset(void)
{
	int rc = 0;

	rc = gpio_request(GPIO_LCDC_BRDG_RESET_N, "lcdc_brdg_reset_n");
	if (rc < 0) {
		pr_err("failed to request lcd brdg reset_n\n");
		return rc;
	}

	rc = gpio_tlmm_config(mipi_dsi_gpio[0], GPIO_CFG_ENABLE);
	if (rc < 0) {
		pr_err("Failed to enable LCDC Bridge reset enable\n");
		return rc;
	}

	rc = gpio_direction_output(GPIO_LCDC_BRDG_RESET_N, 1);
	if (rc < 0) {
		pr_err("Failed GPIO bridge pd\n");
		gpio_free(GPIO_LCDC_BRDG_RESET_N);
		return rc;
	}

	mipi_truly_sel_mode(1);

	return rc;
}

static int msm_fb_dsi_client_reset(void)
{
	int rc = 0;

	rc = msm_fb_dsi_client_qrd1_reset();
	return rc;
}

static int dsi_gpio_initialized;

static int mipi_dsi_panel_qrd1_power(int on)
{
	int rc = 0;

	if (!dsi_gpio_initialized) {
		rc = gpio_request(GPIO_BACKLIGHT_EN, "gpio_bkl_en");
		if (rc < 0)
			return rc;

		rc = gpio_tlmm_config(GPIO_CFG(GPIO_BACKLIGHT_EN, 0,
			GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
			GPIO_CFG_ENABLE);
		if (rc < 0) {
			pr_err("failed GPIO_BACKLIGHT_EN tlmm config\n");
			return rc;
		}

		rc = gpio_direction_output(GPIO_BACKLIGHT_EN, 1);
		if (rc < 0) {
			pr_err("failed to enable backlight\n");
			gpio_free(GPIO_BACKLIGHT_EN);
			return rc;
		}
		dsi_gpio_initialized = 1;
	}

	gpio_set_value_cansleep(GPIO_BACKLIGHT_EN, !!on);

	if (!on) {
		gpio_set_value_cansleep(GPIO_LCDC_BRDG_RESET_N, 1);
		msleep(20);
		gpio_set_value_cansleep(GPIO_LCDC_BRDG_RESET_N, 0);
		msleep(20);
		gpio_set_value_cansleep(GPIO_LCDC_BRDG_RESET_N, 1);

	}

	return rc;
}

static int mipi_dsi_panel_power(int on)
{
	int rc = 0;

	rc = mipi_dsi_panel_qrd1_power(on);
	return rc;
}

#define MDP_303_VSYNC_GPIO 97

#ifdef CONFIG_FB_MSM_MDP303
static struct mipi_dsi_platform_data mipi_dsi_pdata = {
	.vsync_gpio		= MDP_303_VSYNC_GPIO,
	.dsi_power_save		= mipi_dsi_panel_power,
	.dsi_client_reset	= msm_fb_dsi_client_reset,
	.get_lane_config	= msm_fb_get_lane_config,
};
#endif

static void __init msm_fb_add_devices(void)
{
	msm_fb_register_device("mdp", &mdp_pdata);
	msm_fb_register_device("mipi_dsi", &mipi_dsi_pdata);
}

static void __init size_pmem_devices(void)
{
#ifdef CONFIG_ANDROID_PMEM
	android_pmem_adsp_pdata.size = pmem_adsp_size;
	android_pmem_pdata.size = pmem_mdp_size;
	android_pmem_audio_pdata.size = pmem_audio_size;
#endif
}

static void __init reserve_memory_for(struct android_pmem_platform_data *p)
{
	msm7627a_reserve_table[p->memory_type].size += p->size;
}

static void __init reserve_pmem_memory(void)
{
#ifdef CONFIG_ANDROID_PMEM
	reserve_memory_for(&android_pmem_adsp_pdata);
	reserve_memory_for(&android_pmem_pdata);
	reserve_memory_for(&android_pmem_audio_pdata);
	msm7627a_reserve_table[MEMTYPE_EBI1].size += pmem_kernel_ebi1_size;
#endif
}

static void __init msm7627a_calculate_reserve_sizes(void)
{
	size_pmem_devices();
	reserve_pmem_memory();
}

static int msm7627a_paddr_to_memtype(unsigned int paddr)
{
	return MEMTYPE_EBI1;
}

static struct reserve_info msm7627a_reserve_info __initdata = {
	.memtype_reserve_table = msm7627a_reserve_table,
	.calculate_reserve_sizes = msm7627a_calculate_reserve_sizes,
	.paddr_to_memtype = msm7627a_paddr_to_memtype,
};

static void __init msm7627a_reserve(void)
{
	reserve_info = &msm7627a_reserve_info;
	msm_reserve();
}

static void __init msm_device_i2c_init(void)
{
	msm_gsbi0_qup_i2c_device.dev.platform_data = &msm_gsbi0_qup_i2c_pdata;
	msm_gsbi1_qup_i2c_device.dev.platform_data = &msm_gsbi1_qup_i2c_pdata;
}

static struct msm_handset_platform_data hs_platform_data = {
	.hs_name = "7k_handset",
	.pwr_key_delay_ms = 500, /* 0 will disable end key */
};

static struct platform_device hs_pdev = {
	.name   = "msm-handset",
	.id     = -1,
	.dev    = {
		.platform_data = &hs_platform_data,
	},
};

#define UART1DM_RX_GPIO		45
static void __init msm_qrd1_init(void)
{
	msm7x2x_misc_init();
	msm_device_i2c_init();
	msm7627a_init_mmc();

	qrd1_camera_gpio_cfg();
#ifdef CONFIG_SERIAL_MSM_HS
	msm_uart_dm1_pdata.wakeup_irq = gpio_to_irq(UART1DM_RX_GPIO);
	msm_device_uart_dm1.dev.platform_data = &msm_uart_dm1_pdata;
#endif

#ifdef CONFIG_USB_MSM_OTG_72K
	msm_otg_pdata.swfi_latency = msm7627a_pm_data
		[MSM_PM_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT].latency;
	msm_device_otg.dev.platform_data = &msm_otg_pdata;
#endif
	msm_device_gadget_peripheral.dev.platform_data =
		&msm_gadget_pdata;
	platform_add_devices(qrd1_devices,
			ARRAY_SIZE(qrd1_devices));
#ifdef CONFIG_USB_EHCI_MSM_72K
	msm7627a_init_host();
#endif
	msm_pm_set_platform_data(msm7627a_pm_data,
				ARRAY_SIZE(msm7627a_pm_data));
	BUG_ON(msm_pm_boot_init(MSM_PM_BOOT_CONFIG_RESET_VECTOR,
				ioremap(0, PAGE_SIZE)));

	msm_fb_add_devices();

#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
	i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
			bahama_devices,
			ARRAY_SIZE(bahama_devices));
	bt_power_init();
#endif

	i2c_register_board_info(MSM_GSBI0_QUP_I2C_BUS_ID, i2c_camera_devices,
			ARRAY_SIZE(i2c_camera_devices));

#if defined(CONFIG_TOUCHSCREEN_SYNAPTICS_RMI4_I2C) || \
	defined(CONFIG_TOUCHSCREEN_SYNAPTICS_RMI4_I2C_MODULE)
	i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
				synaptic_i2c_clearpad3k,
				ARRAY_SIZE(synaptic_i2c_clearpad3k));
#endif
	platform_device_register(&hs_pdev);

#ifdef CONFIG_MSM_RPC_VIBRATOR
	msm_init_pmic_vibrator();
#endif
}

static void __init qrd7627a_init_early(void)
{
	msm_msm7627a_allocate_memory_regions();
}

MACHINE_START(MSM7627A_QRD1, "QRD MSM7627a QRD1")
	.boot_params	= PHYS_OFFSET + 0x100,
	.map_io		= msm_common_io_init,
	.reserve	= msm7627a_reserve,
	.init_irq	= msm_init_irq,
	.init_machine	= msm_qrd1_init,
	.timer		= &msm_timer,
	.init_early	= qrd7627a_init_early,
	.handle_irq	= vic_handle_irq,
MACHINE_END