| /* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| #include <linux/slab.h> |
| #include <linux/mutex.h> |
| #include <linux/mfd/wcd9xxx/wcd9xxx-slimslave.h> |
| #include <linux/mfd/wcd9xxx/wcd9xxx_registers.h> |
| |
| struct wcd9xxx_slim_sch { |
| u16 rx_port_ch_reg_base; |
| u16 port_tx_cfg_reg_base; |
| u16 port_rx_cfg_reg_base; |
| }; |
| |
| static struct wcd9xxx_slim_sch sh_ch; |
| |
| static int wcd9xxx_alloc_slim_sh_ch(struct wcd9xxx *wcd9xxx, |
| u8 wcd9xxx_pgd_la, u32 cnt, |
| struct wcd9xxx_ch *channels, u32 path); |
| |
| static int wcd9xxx_dealloc_slim_sh_ch(struct slim_device *slim, |
| u32 cnt, struct wcd9xxx_ch *channels); |
| |
| static int wcd9xxx_configure_ports(struct wcd9xxx *wcd9xxx) |
| { |
| if (wcd9xxx->codec_type->slim_slave_type == |
| WCD9XXX_SLIM_SLAVE_ADDR_TYPE_TABLA) { |
| sh_ch.rx_port_ch_reg_base = 0x180; |
| sh_ch.port_rx_cfg_reg_base = 0x040; |
| sh_ch.port_tx_cfg_reg_base = 0x040; |
| } else { |
| sh_ch.rx_port_ch_reg_base = |
| 0x180 - (TAIKO_SB_PGD_OFFSET_OF_RX_SLAVE_DEV_PORTS * 4); |
| sh_ch.port_rx_cfg_reg_base = |
| 0x040 - TAIKO_SB_PGD_OFFSET_OF_RX_SLAVE_DEV_PORTS; |
| sh_ch.port_tx_cfg_reg_base = 0x050; |
| } |
| |
| return 0; |
| } |
| |
| |
| int wcd9xxx_init_slimslave(struct wcd9xxx *wcd9xxx, u8 wcd9xxx_pgd_la, |
| unsigned int tx_num, unsigned int *tx_slot, |
| unsigned int rx_num, unsigned int *rx_slot) |
| { |
| int ret = 0; |
| int i; |
| |
| ret = wcd9xxx_configure_ports(wcd9xxx); |
| if (ret) { |
| pr_err("%s: Failed to configure register address offset\n", |
| __func__); |
| goto err; |
| } |
| |
| if (wcd9xxx->rx_chs) { |
| wcd9xxx->num_rx_port = rx_num; |
| for (i = 0; i < rx_num; i++) { |
| wcd9xxx->rx_chs[i].ch_num = rx_slot[i]; |
| INIT_LIST_HEAD(&wcd9xxx->rx_chs[i].list); |
| } |
| ret = wcd9xxx_alloc_slim_sh_ch(wcd9xxx, wcd9xxx_pgd_la, |
| wcd9xxx->num_rx_port, |
| wcd9xxx->rx_chs, |
| SLIM_SINK); |
| if (ret) { |
| pr_err("%s: Failed to alloc %d rx slimbus channels\n", |
| __func__, wcd9xxx->num_rx_port); |
| kfree(wcd9xxx->rx_chs); |
| wcd9xxx->rx_chs = NULL; |
| wcd9xxx->num_rx_port = 0; |
| } |
| } else { |
| pr_err("Not able to allocate memory for %d slimbus rx ports\n", |
| wcd9xxx->num_rx_port); |
| } |
| |
| if (wcd9xxx->tx_chs) { |
| wcd9xxx->num_tx_port = tx_num; |
| for (i = 0; i < tx_num; i++) { |
| wcd9xxx->tx_chs[i].ch_num = tx_slot[i]; |
| INIT_LIST_HEAD(&wcd9xxx->tx_chs[i].list); |
| } |
| ret = wcd9xxx_alloc_slim_sh_ch(wcd9xxx, wcd9xxx_pgd_la, |
| wcd9xxx->num_tx_port, |
| wcd9xxx->tx_chs, |
| SLIM_SRC); |
| if (ret) { |
| pr_err("%s: Failed to alloc %d tx slimbus channels\n", |
| __func__, wcd9xxx->num_tx_port); |
| kfree(wcd9xxx->tx_chs); |
| wcd9xxx->tx_chs = NULL; |
| wcd9xxx->num_tx_port = 0; |
| } |
| } else { |
| pr_err("Not able to allocate memory for %d slimbus tx ports\n", |
| wcd9xxx->num_tx_port); |
| } |
| |
| return 0; |
| err: |
| return ret; |
| } |
| |
| int wcd9xxx_deinit_slimslave(struct wcd9xxx *wcd9xxx) |
| { |
| if (wcd9xxx->num_rx_port) { |
| wcd9xxx_dealloc_slim_sh_ch(wcd9xxx->slim, |
| wcd9xxx->num_rx_port, |
| wcd9xxx->rx_chs); |
| wcd9xxx->num_rx_port = 0; |
| } |
| if (wcd9xxx->num_tx_port) { |
| wcd9xxx_dealloc_slim_sh_ch(wcd9xxx->slim, |
| wcd9xxx->num_tx_port, |
| wcd9xxx->tx_chs); |
| wcd9xxx->num_tx_port = 0; |
| } |
| return 0; |
| } |
| |
| |
| static int wcd9xxx_alloc_slim_sh_ch(struct wcd9xxx *wcd9xxx, |
| u8 wcd9xxx_pgd_la, u32 cnt, |
| struct wcd9xxx_ch *channels, u32 path) |
| { |
| int ret = 0; |
| u32 ch_idx ; |
| |
| /* The slimbus channel allocation seem take longer time |
| * so do the allocation up front to avoid delay in start of |
| * playback |
| */ |
| pr_debug("%s: pgd_la[%d]\n", __func__, wcd9xxx_pgd_la); |
| for (ch_idx = 0; ch_idx < cnt; ch_idx++) { |
| ret = slim_get_slaveport(wcd9xxx_pgd_la, |
| channels[ch_idx].port, |
| &channels[ch_idx].sph, path); |
| pr_debug("%s: pgd_la[%d] channels[%d].port[%d]\n" |
| "channels[%d].sph[%d] path[%d]\n", |
| __func__, wcd9xxx_pgd_la, ch_idx, |
| channels[ch_idx].port, |
| ch_idx, channels[ch_idx].sph, path); |
| if (ret < 0) { |
| pr_err("%s: slave port failure id[%d] ret[%d]\n", |
| __func__, channels[ch_idx].ch_num, ret); |
| goto err; |
| } |
| |
| ret = slim_query_ch(wcd9xxx->slim, |
| channels[ch_idx].ch_num, |
| &channels[ch_idx].ch_h); |
| if (ret < 0) { |
| pr_err("%s: slim_query_ch failed ch-num[%d] ret[%d]\n", |
| __func__, channels[ch_idx].ch_num, ret); |
| goto err; |
| } |
| } |
| err: |
| return ret; |
| } |
| |
| static int wcd9xxx_dealloc_slim_sh_ch(struct slim_device *slim, |
| u32 cnt, struct wcd9xxx_ch *channels) |
| { |
| int idx = 0; |
| int ret = 0; |
| /* slim_dealloc_ch */ |
| for (idx = 0; idx < cnt; idx++) { |
| ret = slim_dealloc_ch(slim, channels[idx].ch_h); |
| if (ret < 0) { |
| pr_err("%s: slim_dealloc_ch fail ret[%d] ch_h[%d]\n", |
| __func__, ret, channels[idx].ch_h); |
| } |
| } |
| return ret; |
| } |
| |
| /* Enable slimbus slave device for RX path */ |
| int wcd9xxx_cfg_slim_sch_rx(struct wcd9xxx *wcd9xxx, |
| struct list_head *wcd9xxx_ch_list, |
| unsigned int rate, unsigned int bit_width, |
| u16 *grph) |
| { |
| u8 ch_cnt = 0; |
| u16 ch_h[SLIM_MAX_RX_PORTS] = {0}; |
| u8 payload = 0; |
| u16 codec_port = 0; |
| int ret; |
| struct slim_ch prop; |
| struct wcd9xxx_ch *rx; |
| |
| /* Configure slave interface device */ |
| |
| list_for_each_entry(rx, wcd9xxx_ch_list, list) { |
| payload |= 1 << rx->shift; |
| ch_h[ch_cnt] = rx->ch_h; |
| ch_cnt++; |
| pr_debug("list ch->ch_h %d ch->sph %d\n", rx->ch_h, rx->sph); |
| } |
| pr_debug("%s: ch_cnt[%d] rate=%d WATER_MARK_VAL %d\n", |
| __func__, ch_cnt, rate, WATER_MARK_VAL); |
| /* slim_define_ch api */ |
| prop.prot = SLIM_AUTO_ISO; |
| prop.baser = SLIM_RATE_4000HZ; |
| prop.dataf = SLIM_CH_DATAF_NOT_DEFINED; |
| prop.auxf = SLIM_CH_AUXF_NOT_APPLICABLE; |
| prop.ratem = (rate/4000); |
| prop.sampleszbits = bit_width; |
| |
| pr_debug("Before slim_define_ch:\n" |
| "ch_cnt %d,ch_h[0] %d ch_h[1] %d, grph %d\n", |
| ch_cnt, ch_h[0], ch_h[1], *grph); |
| ret = slim_define_ch(wcd9xxx->slim, &prop, ch_h, ch_cnt, |
| true, grph); |
| if (ret < 0) { |
| pr_err("%s: slim_define_ch failed ret[%d]\n", |
| __func__, ret); |
| goto err; |
| } |
| |
| list_for_each_entry(rx, wcd9xxx_ch_list, list) { |
| codec_port = rx->port; |
| pr_debug("%s: codec_port %d rx 0x%x, payload %d\n" |
| "sh_ch.rx_port_ch_reg_base0 0x%x\n" |
| "sh_ch.port_rx_cfg_reg_base 0x%x\n", |
| __func__, codec_port, (u32)rx, payload, |
| sh_ch.rx_port_ch_reg_base, |
| sh_ch.port_rx_cfg_reg_base); |
| |
| /* look for the valid port range and chose the |
| * payload accordingly |
| */ |
| /* write to interface device */ |
| ret = wcd9xxx_interface_reg_write(wcd9xxx, |
| SB_PGD_RX_PORT_MULTI_CHANNEL_0( |
| sh_ch.rx_port_ch_reg_base, codec_port), |
| payload); |
| |
| if (ret < 0) { |
| pr_err("%s:Intf-dev fail reg[%d] payload[%d] ret[%d]\n", |
| __func__, |
| SB_PGD_RX_PORT_MULTI_CHANNEL_0( |
| sh_ch.rx_port_ch_reg_base, codec_port), |
| payload, ret); |
| goto err; |
| } |
| /* configure the slave port for water mark and enable*/ |
| ret = wcd9xxx_interface_reg_write(wcd9xxx, |
| SB_PGD_PORT_CFG_BYTE_ADDR( |
| sh_ch.port_rx_cfg_reg_base, codec_port), |
| WATER_MARK_VAL); |
| if (ret < 0) { |
| pr_err("%s:watermark set failure for port[%d] ret[%d]", |
| __func__, codec_port, ret); |
| } |
| |
| ret = slim_connect_sink(wcd9xxx->slim, &rx->sph, 1, rx->ch_h); |
| if (ret < 0) { |
| pr_err("%s: slim_connect_sink failed ret[%d]\n", |
| __func__, ret); |
| goto err_close_slim_sch; |
| } |
| } |
| /* slim_control_ch */ |
| ret = slim_control_ch(wcd9xxx->slim, *grph, SLIM_CH_ACTIVATE, |
| true); |
| if (ret < 0) { |
| pr_err("%s: slim_control_ch failed ret[%d]\n", |
| __func__, ret); |
| goto err_close_slim_sch; |
| } |
| return 0; |
| |
| err_close_slim_sch: |
| /* release all acquired handles */ |
| wcd9xxx_close_slim_sch_rx(wcd9xxx, wcd9xxx_ch_list, *grph); |
| err: |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(wcd9xxx_cfg_slim_sch_rx); |
| |
| /* Enable slimbus slave device for RX path */ |
| int wcd9xxx_cfg_slim_sch_tx(struct wcd9xxx *wcd9xxx, |
| struct list_head *wcd9xxx_ch_list, |
| unsigned int rate, unsigned int bit_width, |
| u16 *grph) |
| { |
| u16 ch_cnt = 0; |
| u16 payload = 0; |
| u16 ch_h[SLIM_MAX_TX_PORTS] = {0}; |
| u16 codec_port; |
| int ret = 0; |
| struct wcd9xxx_ch *tx; |
| |
| struct slim_ch prop; |
| |
| list_for_each_entry(tx, wcd9xxx_ch_list, list) { |
| payload |= 1 << tx->shift; |
| ch_h[ch_cnt] = tx->ch_h; |
| ch_cnt++; |
| } |
| |
| /* slim_define_ch api */ |
| prop.prot = SLIM_AUTO_ISO; |
| prop.baser = SLIM_RATE_4000HZ; |
| prop.dataf = SLIM_CH_DATAF_NOT_DEFINED; |
| prop.auxf = SLIM_CH_AUXF_NOT_APPLICABLE; |
| prop.ratem = (rate/4000); |
| prop.sampleszbits = 16; |
| ret = slim_define_ch(wcd9xxx->slim, &prop, ch_h, ch_cnt, |
| true, grph); |
| if (ret < 0) { |
| pr_err("%s: slim_define_ch failed ret[%d]\n", |
| __func__, ret); |
| goto err; |
| } |
| |
| pr_debug("%s: ch_cnt[%d] rate[%d]\n", __func__, ch_cnt, rate); |
| list_for_each_entry(tx, wcd9xxx_ch_list, list) { |
| codec_port = tx->port; |
| pr_debug("%s: codec_port %d rx 0x%x, payload 0x%x\n", |
| __func__, codec_port, (u32)tx, payload); |
| /* write to interface device */ |
| ret = wcd9xxx_interface_reg_write(wcd9xxx, |
| SB_PGD_TX_PORT_MULTI_CHANNEL_0(codec_port), |
| payload & 0x00FF); |
| if (ret < 0) { |
| pr_err("%s:Intf-dev fail reg[%d] payload[%d] ret[%d]\n", |
| __func__, |
| SB_PGD_TX_PORT_MULTI_CHANNEL_0(codec_port), |
| payload, ret); |
| goto err; |
| } |
| /* ports 8,9 */ |
| ret = wcd9xxx_interface_reg_write(wcd9xxx, |
| SB_PGD_TX_PORT_MULTI_CHANNEL_1(codec_port), |
| (payload & 0xFF00)>>8); |
| if (ret < 0) { |
| pr_err("%s:Intf-dev fail reg[%d] payload[%d] ret[%d]\n", |
| __func__, |
| SB_PGD_TX_PORT_MULTI_CHANNEL_1(codec_port), |
| payload, ret); |
| goto err; |
| } |
| /* configure the slave port for water mark and enable*/ |
| ret = wcd9xxx_interface_reg_write(wcd9xxx, |
| SB_PGD_PORT_CFG_BYTE_ADDR( |
| sh_ch.port_tx_cfg_reg_base, codec_port), |
| WATER_MARK_VAL); |
| if (ret < 0) { |
| pr_err("%s:watermark set failure for port[%d] ret[%d]", |
| __func__, codec_port, ret); |
| } |
| |
| ret = slim_connect_src(wcd9xxx->slim, tx->sph, tx->ch_h); |
| |
| if (ret < 0) { |
| pr_err("%s: slim_connect_src failed ret[%d]\n", |
| __func__, ret); |
| goto err; |
| } |
| } |
| /* slim_control_ch */ |
| ret = slim_control_ch(wcd9xxx->slim, *grph, SLIM_CH_ACTIVATE, |
| true); |
| if (ret < 0) { |
| pr_err("%s: slim_control_ch failed ret[%d]\n", |
| __func__, ret); |
| goto err; |
| } |
| return 0; |
| err: |
| /* release all acquired handles */ |
| wcd9xxx_close_slim_sch_tx(wcd9xxx, wcd9xxx_ch_list, *grph); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(wcd9xxx_cfg_slim_sch_tx); |
| |
| int wcd9xxx_close_slim_sch_rx(struct wcd9xxx *wcd9xxx, |
| struct list_head *wcd9xxx_ch_list, u16 grph) |
| { |
| u32 sph[SLIM_MAX_RX_PORTS] = {0}; |
| int ch_cnt = 0 ; |
| int ret = 0; |
| struct wcd9xxx_ch *rx; |
| |
| list_for_each_entry(rx, wcd9xxx_ch_list, list) |
| sph[ch_cnt++] = rx->sph; |
| |
| pr_debug("%s ch_cht %d, sph[0] %d sph[1] %d\n", __func__, ch_cnt, |
| sph[0], sph[1]); |
| |
| /* slim_control_ch (REMOVE) */ |
| pr_debug("%s before slim_control_ch grph %d\n", __func__, grph); |
| ret = slim_control_ch(wcd9xxx->slim, grph, SLIM_CH_REMOVE, true); |
| if (ret < 0) { |
| pr_err("%s: slim_control_ch failed ret[%d]\n", __func__, ret); |
| goto err; |
| } |
| err: |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(wcd9xxx_close_slim_sch_rx); |
| |
| int wcd9xxx_close_slim_sch_tx(struct wcd9xxx *wcd9xxx, |
| struct list_head *wcd9xxx_ch_list, |
| u16 grph) |
| { |
| u32 sph[SLIM_MAX_TX_PORTS] = {0}; |
| int ret = 0; |
| int ch_cnt = 0 ; |
| struct wcd9xxx_ch *tx; |
| |
| pr_debug("%s\n", __func__); |
| list_for_each_entry(tx, wcd9xxx_ch_list, list) |
| sph[ch_cnt++] = tx->sph; |
| |
| pr_debug("%s ch_cht %d, sph[0] %d sph[1] %d\n", |
| __func__, ch_cnt, sph[0], sph[1]); |
| /* slim_control_ch (REMOVE) */ |
| ret = slim_control_ch(wcd9xxx->slim, grph, SLIM_CH_REMOVE, true); |
| if (ret < 0) { |
| pr_err("%s: slim_control_ch failed ret[%d]\n", |
| __func__, ret); |
| goto err; |
| } |
| err: |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(wcd9xxx_close_slim_sch_tx); |
| |
| int wcd9xxx_get_slave_port(unsigned int ch_num) |
| { |
| int ret = 0; |
| |
| ret = (ch_num - BASE_CH_NUM); |
| pr_debug("%s: ch_num[%d] slave port[%d]\n", __func__, ch_num, ret); |
| if (ret < 0) { |
| pr_err("%s: Error:- Invalid slave port found = %d\n", |
| __func__, ret); |
| return -EINVAL; |
| } |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(wcd9xxx_get_slave_port); |
| |
| int wcd9xxx_disconnect_port(struct wcd9xxx *wcd9xxx, |
| struct list_head *wcd9xxx_ch_list, u16 grph) |
| { |
| u32 sph[SLIM_MAX_TX_PORTS + SLIM_MAX_RX_PORTS] = {0}; |
| int ch_cnt = 0 ; |
| int ret = 0; |
| struct wcd9xxx_ch *slim_ch; |
| |
| list_for_each_entry(slim_ch, wcd9xxx_ch_list, list) |
| sph[ch_cnt++] = slim_ch->sph; |
| |
| /* slim_disconnect_port */ |
| ret = slim_disconnect_ports(wcd9xxx->slim, sph, ch_cnt); |
| if (ret < 0) { |
| pr_err("%s: slim_disconnect_ports failed ret[%d]\n", |
| __func__, ret); |
| } |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(wcd9xxx_disconnect_port); |
| |
| /* This function is called with mutex acquired */ |
| int wcd9xxx_rx_vport_validation(u32 port_id, |
| struct list_head *codec_dai_list) |
| { |
| struct wcd9xxx_ch *ch; |
| int ret = 0; |
| |
| pr_debug("%s: port_id %u\n", __func__, port_id); |
| |
| list_for_each_entry(ch, |
| codec_dai_list, list) { |
| pr_debug("%s: ch->port %u\n", __func__, ch->port); |
| if (ch->port == port_id) { |
| ret = -EINVAL; |
| break; |
| } |
| } |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(wcd9xxx_rx_vport_validation); |
| |
| |
| /* This function is called with mutex acquired */ |
| int wcd9xxx_tx_vport_validation(u32 vtable, u32 port_id, |
| struct wcd9xxx_codec_dai_data *codec_dai, |
| u32 num_codec_dais) |
| { |
| struct wcd9xxx_ch *ch; |
| int ret = 0; |
| u32 index; |
| u32 size = sizeof(vtable) * 8; |
| pr_debug("%s: vtable 0x%x port_id %u size %d\n", __func__, |
| vtable, port_id, size); |
| for_each_set_bit(index, (unsigned long *)&vtable, size) { |
| if (index < num_codec_dais) { |
| list_for_each_entry(ch, |
| &codec_dai[index].wcd9xxx_ch_list, |
| list) { |
| pr_debug("%s: index %u ch->port %u vtable 0x%x\n", |
| __func__, index, ch->port, |
| vtable); |
| if (ch->port == port_id) { |
| pr_err("%s: TX%u is used by AIF%u_CAP Mixer\n", |
| __func__, port_id + 1, |
| (index + 1)/2); |
| ret = -EINVAL; |
| break; |
| } |
| } |
| } else { |
| pr_err("%s: Invalid index %d of codec dai", |
| __func__, index); |
| ret = -EINVAL; |
| } |
| if (ret) |
| break; |
| } |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(wcd9xxx_tx_vport_validation); |