| /* |
| * Copyright 2000 by Hans Reiser, licensing governed by reiserfs/README |
| */ |
| |
| #include <linux/time.h> |
| #include <linux/reiserfs_fs.h> |
| #include <linux/reiserfs_acl.h> |
| #include <linux/reiserfs_xattr.h> |
| #include <asm/uaccess.h> |
| #include <linux/pagemap.h> |
| #include <linux/swap.h> |
| #include <linux/writeback.h> |
| #include <linux/blkdev.h> |
| #include <linux/buffer_head.h> |
| #include <linux/quotaops.h> |
| |
| /* |
| ** We pack the tails of files on file close, not at the time they are written. |
| ** This implies an unnecessary copy of the tail and an unnecessary indirect item |
| ** insertion/balancing, for files that are written in one write. |
| ** It avoids unnecessary tail packings (balances) for files that are written in |
| ** multiple writes and are small enough to have tails. |
| ** |
| ** file_release is called by the VFS layer when the file is closed. If |
| ** this is the last open file descriptor, and the file |
| ** small enough to have a tail, and the tail is currently in an |
| ** unformatted node, the tail is converted back into a direct item. |
| ** |
| ** We use reiserfs_truncate_file to pack the tail, since it already has |
| ** all the conditions coded. |
| */ |
| static int reiserfs_file_release(struct inode *inode, struct file *filp) |
| { |
| |
| struct reiserfs_transaction_handle th; |
| int err; |
| int jbegin_failure = 0; |
| |
| BUG_ON(!S_ISREG(inode->i_mode)); |
| |
| /* fast out for when nothing needs to be done */ |
| if ((atomic_read(&inode->i_count) > 1 || |
| !(REISERFS_I(inode)->i_flags & i_pack_on_close_mask) || |
| !tail_has_to_be_packed(inode)) && |
| REISERFS_I(inode)->i_prealloc_count <= 0) { |
| return 0; |
| } |
| |
| mutex_lock(&inode->i_mutex); |
| |
| mutex_lock(&(REISERFS_I(inode)->i_mmap)); |
| if (REISERFS_I(inode)->i_flags & i_ever_mapped) |
| REISERFS_I(inode)->i_flags &= ~i_pack_on_close_mask; |
| |
| reiserfs_write_lock(inode->i_sb); |
| /* freeing preallocation only involves relogging blocks that |
| * are already in the current transaction. preallocation gets |
| * freed at the end of each transaction, so it is impossible for |
| * us to log any additional blocks (including quota blocks) |
| */ |
| err = journal_begin(&th, inode->i_sb, 1); |
| if (err) { |
| /* uh oh, we can't allow the inode to go away while there |
| * is still preallocation blocks pending. Try to join the |
| * aborted transaction |
| */ |
| jbegin_failure = err; |
| err = journal_join_abort(&th, inode->i_sb, 1); |
| |
| if (err) { |
| /* hmpf, our choices here aren't good. We can pin the inode |
| * which will disallow unmount from every happening, we can |
| * do nothing, which will corrupt random memory on unmount, |
| * or we can forcibly remove the file from the preallocation |
| * list, which will leak blocks on disk. Lets pin the inode |
| * and let the admin know what is going on. |
| */ |
| igrab(inode); |
| reiserfs_warning(inode->i_sb, |
| "pinning inode %lu because the " |
| "preallocation can't be freed", |
| inode->i_ino); |
| goto out; |
| } |
| } |
| reiserfs_update_inode_transaction(inode); |
| |
| #ifdef REISERFS_PREALLOCATE |
| reiserfs_discard_prealloc(&th, inode); |
| #endif |
| err = journal_end(&th, inode->i_sb, 1); |
| |
| /* copy back the error code from journal_begin */ |
| if (!err) |
| err = jbegin_failure; |
| |
| if (!err && atomic_read(&inode->i_count) <= 1 && |
| (REISERFS_I(inode)->i_flags & i_pack_on_close_mask) && |
| tail_has_to_be_packed(inode)) { |
| /* if regular file is released by last holder and it has been |
| appended (we append by unformatted node only) or its direct |
| item(s) had to be converted, then it may have to be |
| indirect2direct converted */ |
| err = reiserfs_truncate_file(inode, 0); |
| } |
| out: |
| mutex_unlock(&(REISERFS_I(inode)->i_mmap)); |
| mutex_unlock(&inode->i_mutex); |
| reiserfs_write_unlock(inode->i_sb); |
| return err; |
| } |
| |
| static int reiserfs_file_mmap(struct file *file, struct vm_area_struct *vma) |
| { |
| struct inode *inode; |
| |
| inode = file->f_path.dentry->d_inode; |
| mutex_lock(&(REISERFS_I(inode)->i_mmap)); |
| REISERFS_I(inode)->i_flags |= i_ever_mapped; |
| mutex_unlock(&(REISERFS_I(inode)->i_mmap)); |
| |
| return generic_file_mmap(file, vma); |
| } |
| |
| static void reiserfs_vfs_truncate_file(struct inode *inode) |
| { |
| reiserfs_truncate_file(inode, 1); |
| } |
| |
| /* Sync a reiserfs file. */ |
| |
| /* |
| * FIXME: sync_mapping_buffers() never has anything to sync. Can |
| * be removed... |
| */ |
| |
| static int reiserfs_sync_file(struct file *p_s_filp, |
| struct dentry *p_s_dentry, int datasync) |
| { |
| struct inode *p_s_inode = p_s_dentry->d_inode; |
| int n_err; |
| int barrier_done; |
| |
| BUG_ON(!S_ISREG(p_s_inode->i_mode)); |
| n_err = sync_mapping_buffers(p_s_inode->i_mapping); |
| reiserfs_write_lock(p_s_inode->i_sb); |
| barrier_done = reiserfs_commit_for_inode(p_s_inode); |
| reiserfs_write_unlock(p_s_inode->i_sb); |
| if (barrier_done != 1 && reiserfs_barrier_flush(p_s_inode->i_sb)) |
| blkdev_issue_flush(p_s_inode->i_sb->s_bdev, NULL); |
| if (barrier_done < 0) |
| return barrier_done; |
| return (n_err < 0) ? -EIO : 0; |
| } |
| |
| /* taken fs/buffer.c:__block_commit_write */ |
| int reiserfs_commit_page(struct inode *inode, struct page *page, |
| unsigned from, unsigned to) |
| { |
| unsigned block_start, block_end; |
| int partial = 0; |
| unsigned blocksize; |
| struct buffer_head *bh, *head; |
| unsigned long i_size_index = inode->i_size >> PAGE_CACHE_SHIFT; |
| int new; |
| int logit = reiserfs_file_data_log(inode); |
| struct super_block *s = inode->i_sb; |
| int bh_per_page = PAGE_CACHE_SIZE / s->s_blocksize; |
| struct reiserfs_transaction_handle th; |
| int ret = 0; |
| |
| th.t_trans_id = 0; |
| blocksize = 1 << inode->i_blkbits; |
| |
| if (logit) { |
| reiserfs_write_lock(s); |
| ret = journal_begin(&th, s, bh_per_page + 1); |
| if (ret) |
| goto drop_write_lock; |
| reiserfs_update_inode_transaction(inode); |
| } |
| for (bh = head = page_buffers(page), block_start = 0; |
| bh != head || !block_start; |
| block_start = block_end, bh = bh->b_this_page) { |
| |
| new = buffer_new(bh); |
| clear_buffer_new(bh); |
| block_end = block_start + blocksize; |
| if (block_end <= from || block_start >= to) { |
| if (!buffer_uptodate(bh)) |
| partial = 1; |
| } else { |
| set_buffer_uptodate(bh); |
| if (logit) { |
| reiserfs_prepare_for_journal(s, bh, 1); |
| journal_mark_dirty(&th, s, bh); |
| } else if (!buffer_dirty(bh)) { |
| mark_buffer_dirty(bh); |
| /* do data=ordered on any page past the end |
| * of file and any buffer marked BH_New. |
| */ |
| if (reiserfs_data_ordered(inode->i_sb) && |
| (new || page->index >= i_size_index)) { |
| reiserfs_add_ordered_list(inode, bh); |
| } |
| } |
| } |
| } |
| if (logit) { |
| ret = journal_end(&th, s, bh_per_page + 1); |
| drop_write_lock: |
| reiserfs_write_unlock(s); |
| } |
| /* |
| * If this is a partial write which happened to make all buffers |
| * uptodate then we can optimize away a bogus readpage() for |
| * the next read(). Here we 'discover' whether the page went |
| * uptodate as a result of this (potentially partial) write. |
| */ |
| if (!partial) |
| SetPageUptodate(page); |
| return ret; |
| } |
| |
| /* Write @count bytes at position @ppos in a file indicated by @file |
| from the buffer @buf. |
| |
| generic_file_write() is only appropriate for filesystems that are not seeking to optimize performance and want |
| something simple that works. It is not for serious use by general purpose filesystems, excepting the one that it was |
| written for (ext2/3). This is for several reasons: |
| |
| * It has no understanding of any filesystem specific optimizations. |
| |
| * It enters the filesystem repeatedly for each page that is written. |
| |
| * It depends on reiserfs_get_block() function which if implemented by reiserfs performs costly search_by_key |
| * operation for each page it is supplied with. By contrast reiserfs_file_write() feeds as much as possible at a time |
| * to reiserfs which allows for fewer tree traversals. |
| |
| * Each indirect pointer insertion takes a lot of cpu, because it involves memory moves inside of blocks. |
| |
| * Asking the block allocation code for blocks one at a time is slightly less efficient. |
| |
| All of these reasons for not using only generic file write were understood back when reiserfs was first miscoded to |
| use it, but we were in a hurry to make code freeze, and so it couldn't be revised then. This new code should make |
| things right finally. |
| |
| Future Features: providing search_by_key with hints. |
| |
| */ |
| static ssize_t reiserfs_file_write(struct file *file, /* the file we are going to write into */ |
| const char __user * buf, /* pointer to user supplied data |
| (in userspace) */ |
| size_t count, /* amount of bytes to write */ |
| loff_t * ppos /* pointer to position in file that we start writing at. Should be updated to |
| * new current position before returning. */ |
| ) |
| { |
| struct inode *inode = file->f_path.dentry->d_inode; // Inode of the file that we are writing to. |
| /* To simplify coding at this time, we store |
| locked pages in array for now */ |
| struct reiserfs_transaction_handle th; |
| th.t_trans_id = 0; |
| |
| /* If a filesystem is converted from 3.5 to 3.6, we'll have v3.5 items |
| * lying around (most of the disk, in fact). Despite the filesystem |
| * now being a v3.6 format, the old items still can't support large |
| * file sizes. Catch this case here, as the rest of the VFS layer is |
| * oblivious to the different limitations between old and new items. |
| * reiserfs_setattr catches this for truncates. This chunk is lifted |
| * from generic_write_checks. */ |
| if (get_inode_item_key_version (inode) == KEY_FORMAT_3_5 && |
| *ppos + count > MAX_NON_LFS) { |
| if (*ppos >= MAX_NON_LFS) { |
| return -EFBIG; |
| } |
| if (count > MAX_NON_LFS - (unsigned long)*ppos) |
| count = MAX_NON_LFS - (unsigned long)*ppos; |
| } |
| |
| return do_sync_write(file, buf, count, ppos); |
| } |
| |
| const struct file_operations reiserfs_file_operations = { |
| .read = do_sync_read, |
| .write = reiserfs_file_write, |
| .ioctl = reiserfs_ioctl, |
| #ifdef CONFIG_COMPAT |
| .compat_ioctl = reiserfs_compat_ioctl, |
| #endif |
| .mmap = reiserfs_file_mmap, |
| .open = generic_file_open, |
| .release = reiserfs_file_release, |
| .fsync = reiserfs_sync_file, |
| .aio_read = generic_file_aio_read, |
| .aio_write = generic_file_aio_write, |
| .splice_read = generic_file_splice_read, |
| .splice_write = generic_file_splice_write, |
| .llseek = generic_file_llseek, |
| }; |
| |
| const struct inode_operations reiserfs_file_inode_operations = { |
| .truncate = reiserfs_vfs_truncate_file, |
| .setattr = reiserfs_setattr, |
| .setxattr = reiserfs_setxattr, |
| .getxattr = reiserfs_getxattr, |
| .listxattr = reiserfs_listxattr, |
| .removexattr = reiserfs_removexattr, |
| .permission = reiserfs_permission, |
| }; |