| /* Definitons for use with the tmio_mmc.c |
| * |
| * (c) 2004 Ian Molton <spyro@f2s.com> |
| * (c) 2007 Ian Molton <spyro@f2s.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| */ |
| |
| #include <linux/highmem.h> |
| #include <linux/interrupt.h> |
| #include <linux/dmaengine.h> |
| |
| #define CTL_SD_CMD 0x00 |
| #define CTL_ARG_REG 0x04 |
| #define CTL_STOP_INTERNAL_ACTION 0x08 |
| #define CTL_XFER_BLK_COUNT 0xa |
| #define CTL_RESPONSE 0x0c |
| #define CTL_STATUS 0x1c |
| #define CTL_IRQ_MASK 0x20 |
| #define CTL_SD_CARD_CLK_CTL 0x24 |
| #define CTL_SD_XFER_LEN 0x26 |
| #define CTL_SD_MEM_CARD_OPT 0x28 |
| #define CTL_SD_ERROR_DETAIL_STATUS 0x2c |
| #define CTL_SD_DATA_PORT 0x30 |
| #define CTL_TRANSACTION_CTL 0x34 |
| #define CTL_RESET_SD 0xe0 |
| #define CTL_SDIO_REGS 0x100 |
| #define CTL_CLK_AND_WAIT_CTL 0x138 |
| #define CTL_RESET_SDIO 0x1e0 |
| |
| /* Definitions for values the CTRL_STATUS register can take. */ |
| #define TMIO_STAT_CMDRESPEND 0x00000001 |
| #define TMIO_STAT_DATAEND 0x00000004 |
| #define TMIO_STAT_CARD_REMOVE 0x00000008 |
| #define TMIO_STAT_CARD_INSERT 0x00000010 |
| #define TMIO_STAT_SIGSTATE 0x00000020 |
| #define TMIO_STAT_WRPROTECT 0x00000080 |
| #define TMIO_STAT_CARD_REMOVE_A 0x00000100 |
| #define TMIO_STAT_CARD_INSERT_A 0x00000200 |
| #define TMIO_STAT_SIGSTATE_A 0x00000400 |
| #define TMIO_STAT_CMD_IDX_ERR 0x00010000 |
| #define TMIO_STAT_CRCFAIL 0x00020000 |
| #define TMIO_STAT_STOPBIT_ERR 0x00040000 |
| #define TMIO_STAT_DATATIMEOUT 0x00080000 |
| #define TMIO_STAT_RXOVERFLOW 0x00100000 |
| #define TMIO_STAT_TXUNDERRUN 0x00200000 |
| #define TMIO_STAT_CMDTIMEOUT 0x00400000 |
| #define TMIO_STAT_RXRDY 0x01000000 |
| #define TMIO_STAT_TXRQ 0x02000000 |
| #define TMIO_STAT_ILL_FUNC 0x20000000 |
| #define TMIO_STAT_CMD_BUSY 0x40000000 |
| #define TMIO_STAT_ILL_ACCESS 0x80000000 |
| |
| /* Define some IRQ masks */ |
| /* This is the mask used at reset by the chip */ |
| #define TMIO_MASK_ALL 0x837f031d |
| #define TMIO_MASK_READOP (TMIO_STAT_RXRDY | TMIO_STAT_DATAEND) |
| #define TMIO_MASK_WRITEOP (TMIO_STAT_TXRQ | TMIO_STAT_DATAEND) |
| #define TMIO_MASK_CMD (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT | \ |
| TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT) |
| #define TMIO_MASK_IRQ (TMIO_MASK_READOP | TMIO_MASK_WRITEOP | TMIO_MASK_CMD) |
| |
| |
| #define enable_mmc_irqs(host, i) \ |
| do { \ |
| u32 mask;\ |
| mask = sd_ctrl_read32((host), CTL_IRQ_MASK); \ |
| mask &= ~((i) & TMIO_MASK_IRQ); \ |
| sd_ctrl_write32((host), CTL_IRQ_MASK, mask); \ |
| } while (0) |
| |
| #define disable_mmc_irqs(host, i) \ |
| do { \ |
| u32 mask;\ |
| mask = sd_ctrl_read32((host), CTL_IRQ_MASK); \ |
| mask |= ((i) & TMIO_MASK_IRQ); \ |
| sd_ctrl_write32((host), CTL_IRQ_MASK, mask); \ |
| } while (0) |
| |
| #define ack_mmc_irqs(host, i) \ |
| do { \ |
| u32 mask;\ |
| mask = sd_ctrl_read32((host), CTL_STATUS); \ |
| mask &= ~((i) & TMIO_MASK_IRQ); \ |
| sd_ctrl_write32((host), CTL_STATUS, mask); \ |
| } while (0) |
| |
| |
| struct tmio_mmc_host { |
| void __iomem *ctl; |
| unsigned long bus_shift; |
| struct mmc_command *cmd; |
| struct mmc_request *mrq; |
| struct mmc_data *data; |
| struct mmc_host *mmc; |
| int irq; |
| |
| /* Callbacks for clock / power control */ |
| void (*set_pwr)(struct platform_device *host, int state); |
| void (*set_clk_div)(struct platform_device *host, int state); |
| |
| /* pio related stuff */ |
| struct scatterlist *sg_ptr; |
| unsigned int sg_len; |
| unsigned int sg_off; |
| |
| struct platform_device *pdev; |
| |
| /* DMA support */ |
| struct dma_chan *chan_rx; |
| struct dma_chan *chan_tx; |
| struct tasklet_struct dma_complete; |
| struct tasklet_struct dma_issue; |
| #ifdef CONFIG_TMIO_MMC_DMA |
| struct dma_async_tx_descriptor *desc; |
| unsigned int dma_sglen; |
| dma_cookie_t cookie; |
| #endif |
| }; |
| |
| #include <linux/io.h> |
| |
| static inline u16 sd_ctrl_read16(struct tmio_mmc_host *host, int addr) |
| { |
| return readw(host->ctl + (addr << host->bus_shift)); |
| } |
| |
| static inline void sd_ctrl_read16_rep(struct tmio_mmc_host *host, int addr, |
| u16 *buf, int count) |
| { |
| readsw(host->ctl + (addr << host->bus_shift), buf, count); |
| } |
| |
| static inline u32 sd_ctrl_read32(struct tmio_mmc_host *host, int addr) |
| { |
| return readw(host->ctl + (addr << host->bus_shift)) | |
| readw(host->ctl + ((addr + 2) << host->bus_shift)) << 16; |
| } |
| |
| static inline void sd_ctrl_write16(struct tmio_mmc_host *host, int addr, |
| u16 val) |
| { |
| writew(val, host->ctl + (addr << host->bus_shift)); |
| } |
| |
| static inline void sd_ctrl_write16_rep(struct tmio_mmc_host *host, int addr, |
| u16 *buf, int count) |
| { |
| writesw(host->ctl + (addr << host->bus_shift), buf, count); |
| } |
| |
| static inline void sd_ctrl_write32(struct tmio_mmc_host *host, int addr, |
| u32 val) |
| { |
| writew(val, host->ctl + (addr << host->bus_shift)); |
| writew(val >> 16, host->ctl + ((addr + 2) << host->bus_shift)); |
| } |
| |
| #include <linux/scatterlist.h> |
| #include <linux/blkdev.h> |
| |
| static inline void tmio_mmc_init_sg(struct tmio_mmc_host *host, |
| struct mmc_data *data) |
| { |
| host->sg_len = data->sg_len; |
| host->sg_ptr = data->sg; |
| host->sg_off = 0; |
| } |
| |
| static inline int tmio_mmc_next_sg(struct tmio_mmc_host *host) |
| { |
| host->sg_ptr = sg_next(host->sg_ptr); |
| host->sg_off = 0; |
| return --host->sg_len; |
| } |
| |
| static inline char *tmio_mmc_kmap_atomic(struct tmio_mmc_host *host, |
| unsigned long *flags) |
| { |
| struct scatterlist *sg = host->sg_ptr; |
| |
| local_irq_save(*flags); |
| return kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset; |
| } |
| |
| static inline void tmio_mmc_kunmap_atomic(struct tmio_mmc_host *host, |
| unsigned long *flags) |
| { |
| kunmap_atomic(sg_page(host->sg_ptr), KM_BIO_SRC_IRQ); |
| local_irq_restore(*flags); |
| } |
| |
| #ifdef CONFIG_MMC_DEBUG |
| |
| #define STATUS_TO_TEXT(a) \ |
| do { \ |
| if (status & TMIO_STAT_##a) \ |
| printk(#a); \ |
| } while (0) |
| |
| void pr_debug_status(u32 status) |
| { |
| printk(KERN_DEBUG "status: %08x = ", status); |
| STATUS_TO_TEXT(CARD_REMOVE); |
| STATUS_TO_TEXT(CARD_INSERT); |
| STATUS_TO_TEXT(SIGSTATE); |
| STATUS_TO_TEXT(WRPROTECT); |
| STATUS_TO_TEXT(CARD_REMOVE_A); |
| STATUS_TO_TEXT(CARD_INSERT_A); |
| STATUS_TO_TEXT(SIGSTATE_A); |
| STATUS_TO_TEXT(CMD_IDX_ERR); |
| STATUS_TO_TEXT(STOPBIT_ERR); |
| STATUS_TO_TEXT(ILL_FUNC); |
| STATUS_TO_TEXT(CMD_BUSY); |
| STATUS_TO_TEXT(CMDRESPEND); |
| STATUS_TO_TEXT(DATAEND); |
| STATUS_TO_TEXT(CRCFAIL); |
| STATUS_TO_TEXT(DATATIMEOUT); |
| STATUS_TO_TEXT(CMDTIMEOUT); |
| STATUS_TO_TEXT(RXOVERFLOW); |
| STATUS_TO_TEXT(TXUNDERRUN); |
| STATUS_TO_TEXT(RXRDY); |
| STATUS_TO_TEXT(TXRQ); |
| STATUS_TO_TEXT(ILL_ACCESS); |
| printk("\n"); |
| } |
| |
| #else |
| #define pr_debug_status(s) do { } while (0) |
| #endif |