blob: 800cd8f539421fda21bafebdf46e45a333a50b23 [file] [log] [blame]
/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/dts-v1/;
/include/ "msm8226.dtsi"
/include/ "dsi-panel-nt35590-720p-video.dtsi"
/ {
model = "Qualcomm MSM 8226 CDP";
compatible = "qcom,msm8226-cdp", "qcom,msm8226";
qcom,msm-id = <145 1 0>;
serial@f991f000 {
status = "ok";
};
qcom,mdss_dsi_nt35590_720p_video {
status = "ok";
};
i2c@f9927000 { /* BLSP1 QUP5 */
synaptics@20 {
compatible = "synaptics,rmi4";
reg = <0x20>;
interrupt-parent = <&msmgpio>;
interrupts = <17 0x2>;
vdd-supply = <&pm8226_l19>;
vcc_i2c-supply = <&pm8226_lvs1>;
synaptics,reset-gpio = <&msmgpio 16 0x00>;
synaptics,irq-gpio = <&msmgpio 17 0x00>;
synaptics,button-map = <139 102 158>;
synaptics,i2c-pull-up;
synaptics,reg-en;
};
};
gpio_keys {
compatible = "gpio-keys";
input-name = "gpio-keys";
camera_focus {
label = "camera_focus";
gpios = <&msmgpio 108 0x1>;
linux,input-type = <1>;
linux,code = <0x210>;
gpio-key,wakeup;
debounce-interval = <15>;
};
camera_snapshot {
label = "camera_snapshot";
gpios = <&msmgpio 107 0x1>;
linux,input-type = <1>;
linux,code = <0x2fe>;
gpio-key,wakeup;
debounce-interval = <15>;
};
vol_up {
label = "volume_up";
gpios = <&msmgpio 106 0x1>;
linux,input-type = <1>;
linux,code = <115>;
gpio-key,wakeup;
debounce-interval = <15>;
};
};
spi@f9923000 {
ethernet-switch@3 {
compatible = "micrel,ks8851";
reg = <3>;
interrupt-parent = <&msmgpio>;
interrupts = <0 115 0>;
spi-max-frequency = <4800000>;
rst-gpio = <&msmgpio 114 0>;
vdd-io-supply = <&pm8226_lvs1>;
vdd-phy-supply = <&pm8226_lvs1>;
};
};
sound {
qcom,cdc-mclk-gpios = <&pm8226_gpios 1 0>;
qcom,cdc-vdd-spkr-gpios = <&pm8226_gpios 2 0>;
};
};
&sdcc1 {
vdd-supply = <&pm8226_l17>;
qcom,vdd-always-on;
qcom,vdd-lpm-sup;
qcom,vdd-voltage-level = <2950000 2950000>;
qcom,vdd-current-level = <800 500000>;
vdd-io-supply = <&pm8226_l6>;
qcom,vdd-io-always-on;
qcom,vdd-io-voltage-level = <1800000 1800000>;
qcom,vdd-io-current-level = <250 154000>;
qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
qcom,pad-drv-on = <0x4 0x4 0x4>; /* 16mA, 10mA, 10mA */
qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */
qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>;
qcom,sup-voltages = <2950 2950>;
qcom,bus-speed-mode = "HS200_1p8v", "DDR_1p8v";
qcom,nonremovable;
status = "ok";
};
&sdcc2 {
vdd-supply = <&pm8226_l18>;
qcom,vdd-voltage-level = <2950000 2950000>;
qcom,vdd-current-level = <9000 800000>;
vdd-io-supply = <&pm8226_l21>;
qcom,vdd-io-always-on;
qcom,vdd-io-lpm-sup;
qcom,vdd-io-voltage-level = <1800000 2950000>;
qcom,vdd-io-current-level = <6 22000>;
qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
qcom,pad-drv-on = <0x4 0x4 0x4>; /* 16mA, 10mA, 10mA */
qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */
qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>;
qcom,sup-voltages = <2950 2950>;
qcom,xpc;
qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104";
qcom,current-limit = <600>;
#address-cells = <0>;
interrupt-parent = <&sdcc2>;
interrupts = <0 1 2>;
#interrupt-cells = <1>;
interrupt-map-mask = <0xffffffff>;
interrupt-map = <0 &intc 0 125 0
1 &intc 0 220 0
2 &msmgpio 38 0x3>;
interrupt-names = "core_irq", "bam_irq", "status_irq";
cd-gpios = <&msmgpio 38 0x1>;
status = "ok";
};
&spmi_bus {
qcom,pm8226@1 {
qcom,leds@d800 {
status = "okay";
qcom,wled_0 {
label = "wled";
linux,name = "wled:backlight";
linux,default-trigger = "bkl-trigger";
qcom,cs-out-en;
qcom,op-fdbck;
qcom,default-state = "on";
qcom,max-current = <25>;
qcom,ctrl-delay-us = <0>;
qcom,boost-curr-lim = <3>;
qcom,cp-sel = <0>;
qcom,switch-freq = <2>;
qcom,ovp-val = <2>;
qcom,num-strings = <1>;
qcom,id = <0>;
};
};
};
};
&pm8226_gpios {
gpio@c000 { /* GPIO 1 */
/* XO_PMIC_CDC_MCLK enable for tapan codec */
qcom,mode = <1>; /* Digital output */
qcom,output-type = <0>; /* CMOS logic */
qcom,pull = <5>; /* QPNP_PIN_PULL_NO*/
qcom,vin-sel = <2>; /* QPNP_PIN_VIN2 */
qcom,out-strength = <3>;/* QPNP_PIN_OUT_STRENGTH_HIGH */
qcom,src-sel = <2>; /* QPNP_PIN_SEL_FUNC_1 */
qcom,master-en = <1>; /* Enable GPIO */
};
gpio@c100 { /* GPIO 2 */
qcom,mode = <1>;
qcom,output-type = <0>;
qcom,pull = <5>;
qcom,vin-sel = <2>;
qcom,out-strength = <3>;
qcom,src-sel = <2>;
qcom,master-en = <1>;
};
gpio@c200 { /* GPIO 3 */
};
gpio@c300 { /* GPIO 4 */
};
gpio@c400 { /* GPIO 5 */
};
gpio@c500 { /* GPIO 6 */
};
gpio@c600 { /* GPIO 7 */
};
gpio@c700 { /* GPIO 8 */
};
};
&pm8226_mpps {
mpp@a000 { /* MPP 1 */
};
mpp@a100 { /* MPP 2 */
};
mpp@a200 { /* MPP 3 */
};
mpp@a300 { /* MPP 4 */
};
mpp@a400 { /* MPP 5 */
};
mpp@a500 { /* MPP 6 */
};
mpp@a600 { /* MPP 7 */
};
mpp@a700 { /* MPP 8 */
};
};
&pm8226_chg {
qcom,chg-charging-disabled;
qcom,chg-use-default-batt-values;
};