| /* |
| * isa1200.c - Haptic Motor |
| * |
| * Copyright (C) 2009 Samsung Electronics |
| * Kyungmin Park <kyungmin.park@samsung.com> |
| * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/i2c.h> |
| #include <linux/gpio.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/pwm.h> |
| #include <linux/workqueue.h> |
| #include <linux/slab.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/i2c/isa1200.h> |
| #include "../staging/android/timed_output.h" |
| |
| #define ISA1200_HCTRL0 0x30 |
| #define ISA1200_HCTRL1 0x31 |
| #define ISA1200_HCTRL5 0x35 |
| |
| #define ISA1200_HCTRL0_RESET 0x01 |
| #define ISA1200_HCTRL1_RESET 0x4B |
| |
| #define ISA1200_HCTRL5_VIB_STRT 0xD5 |
| #define ISA1200_HCTRL5_VIB_STOP 0x6B |
| |
| struct isa1200_chip { |
| struct i2c_client *client; |
| struct isa1200_platform_data *pdata; |
| struct pwm_device *pwm; |
| struct hrtimer timer; |
| struct timed_output_dev dev; |
| struct work_struct work; |
| spinlock_t lock; |
| unsigned int enable; |
| unsigned int period_ns; |
| bool is_len_gpio_valid; |
| struct regulator **regs; |
| }; |
| |
| static int isa1200_read_reg(struct i2c_client *client, int reg) |
| { |
| int ret; |
| |
| ret = i2c_smbus_read_byte_data(client, reg); |
| if (ret < 0) |
| dev_err(&client->dev, "%s: err %d\n", __func__, ret); |
| |
| return ret; |
| } |
| |
| static int isa1200_write_reg(struct i2c_client *client, int reg, u8 value) |
| { |
| int ret; |
| |
| ret = i2c_smbus_write_byte_data(client, reg, value); |
| if (ret < 0) |
| dev_err(&client->dev, "%s: err %d\n", __func__, ret); |
| |
| return ret; |
| } |
| |
| static void isa1200_vib_set(struct isa1200_chip *haptic, int enable) |
| { |
| int rc = 0; |
| |
| if (enable) { |
| if (haptic->pdata->mode_ctrl == PWM_INPUT_MODE) { |
| int period_us = haptic->period_ns / 1000; |
| rc = pwm_config(haptic->pwm, |
| (period_us * haptic->pdata->duty) / 100, |
| period_us); |
| if (rc < 0) |
| pr_err("%s: pwm_config fail\n", __func__); |
| rc = pwm_enable(haptic->pwm); |
| if (rc < 0) |
| pr_err("%s: pwm_enable fail\n", __func__); |
| } else if (haptic->pdata->mode_ctrl == PWM_GEN_MODE) { |
| rc = isa1200_write_reg(haptic->client, |
| ISA1200_HCTRL5, |
| ISA1200_HCTRL5_VIB_STRT); |
| if (rc < 0) |
| pr_err("%s: start vibartion fail\n", __func__); |
| } |
| } else { |
| if (haptic->pdata->mode_ctrl == PWM_INPUT_MODE) |
| pwm_disable(haptic->pwm); |
| else if (haptic->pdata->mode_ctrl == PWM_GEN_MODE) { |
| rc = isa1200_write_reg(haptic->client, |
| ISA1200_HCTRL5, |
| ISA1200_HCTRL5_VIB_STOP); |
| if (rc < 0) |
| pr_err("%s: stop vibartion fail\n", __func__); |
| } |
| } |
| } |
| |
| static void isa1200_chip_work(struct work_struct *work) |
| { |
| struct isa1200_chip *haptic; |
| |
| haptic = container_of(work, struct isa1200_chip, work); |
| isa1200_vib_set(haptic, haptic->enable); |
| } |
| |
| static void isa1200_chip_enable(struct timed_output_dev *dev, int value) |
| { |
| struct isa1200_chip *haptic = container_of(dev, struct isa1200_chip, |
| dev); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&haptic->lock, flags); |
| hrtimer_cancel(&haptic->timer); |
| if (value == 0) |
| haptic->enable = 0; |
| else { |
| value = (value > haptic->pdata->max_timeout ? |
| haptic->pdata->max_timeout : value); |
| haptic->enable = 1; |
| hrtimer_start(&haptic->timer, |
| ktime_set(value / 1000, (value % 1000) * 1000000), |
| HRTIMER_MODE_REL); |
| } |
| spin_unlock_irqrestore(&haptic->lock, flags); |
| schedule_work(&haptic->work); |
| } |
| |
| static int isa1200_chip_get_time(struct timed_output_dev *dev) |
| { |
| struct isa1200_chip *haptic = container_of(dev, struct isa1200_chip, |
| dev); |
| |
| if (hrtimer_active(&haptic->timer)) { |
| ktime_t r = hrtimer_get_remaining(&haptic->timer); |
| struct timeval t = ktime_to_timeval(r); |
| return t.tv_sec * 1000 + t.tv_usec / 1000; |
| } else |
| return 0; |
| } |
| |
| static enum hrtimer_restart isa1200_vib_timer_func(struct hrtimer *timer) |
| { |
| struct isa1200_chip *haptic = container_of(timer, struct isa1200_chip, |
| timer); |
| haptic->enable = 0; |
| schedule_work(&haptic->work); |
| |
| return HRTIMER_NORESTART; |
| } |
| |
| static void dump_isa1200_reg(char *str, struct i2c_client *client) |
| { |
| pr_debug("%s reg0x%x=0x%x, reg0x%x=0x%x, reg0x%x=0x%x\n", str, |
| ISA1200_HCTRL0, isa1200_read_reg(client, ISA1200_HCTRL0), |
| ISA1200_HCTRL1, isa1200_read_reg(client, ISA1200_HCTRL1), |
| ISA1200_HCTRL5, isa1200_read_reg(client, ISA1200_HCTRL5)); |
| } |
| |
| static int isa1200_setup(struct i2c_client *client) |
| { |
| struct isa1200_chip *haptic = i2c_get_clientdata(client); |
| int value, temp, rc; |
| |
| gpio_set_value_cansleep(haptic->pdata->hap_en_gpio, 0); |
| if (haptic->is_len_gpio_valid == true) |
| gpio_set_value_cansleep(haptic->pdata->hap_len_gpio, 0); |
| |
| udelay(250); |
| |
| gpio_set_value_cansleep(haptic->pdata->hap_en_gpio, 1); |
| if (haptic->is_len_gpio_valid == true) |
| gpio_set_value_cansleep(haptic->pdata->hap_len_gpio, 1); |
| |
| value = (haptic->pdata->smart_en << 3) | |
| (haptic->pdata->is_erm << 5) | |
| (haptic->pdata->ext_clk_en << 7); |
| |
| rc = isa1200_write_reg(client, ISA1200_HCTRL1, value); |
| if (rc < 0) { |
| pr_err("%s: i2c write failure\n", __func__); |
| goto reset_gpios; |
| } |
| |
| if (haptic->pdata->mode_ctrl == PWM_GEN_MODE) { |
| temp = haptic->pdata->pwm_fd.pwm_div; |
| if (temp < 128 || temp > 1024 || temp % 128) { |
| pr_err("%s: Invalid divider\n", __func__); |
| goto reset_hctrl1; |
| } |
| value = ((temp >> 7) - 1); |
| } else if (haptic->pdata->mode_ctrl == PWM_INPUT_MODE) { |
| temp = haptic->pdata->pwm_fd.pwm_freq; |
| if (temp < 22400 || temp > 172600 || temp % 22400) { |
| pr_err("%s: Invalid frequency\n", __func__); |
| goto reset_hctrl1; |
| } |
| value = ((temp / 22400) - 1); |
| haptic->period_ns = NSEC_PER_SEC / temp; |
| } |
| |
| value |= (haptic->pdata->mode_ctrl << 3) | |
| (haptic->pdata->overdrive_high << 5) | |
| (haptic->pdata->overdrive_en << 5) | |
| (haptic->pdata->chip_en << 7); |
| |
| rc = isa1200_write_reg(client, ISA1200_HCTRL0, value); |
| if (rc < 0) { |
| pr_err("%s: i2c write failure\n", __func__); |
| goto reset_hctrl1; |
| } |
| |
| dump_isa1200_reg("new:", client); |
| return 0; |
| |
| reset_hctrl1: |
| i2c_smbus_write_byte_data(client, ISA1200_HCTRL1, |
| ISA1200_HCTRL1_RESET); |
| reset_gpios: |
| gpio_set_value_cansleep(haptic->pdata->hap_en_gpio, 0); |
| if (haptic->is_len_gpio_valid == true) |
| gpio_set_value_cansleep(haptic->pdata->hap_len_gpio, 0); |
| return rc; |
| } |
| |
| static int isa1200_reg_power(struct isa1200_chip *haptic, bool on) |
| { |
| const struct isa1200_regulator *reg_info = |
| haptic->pdata->regulator_info; |
| u8 i, num_reg = haptic->pdata->num_regulators; |
| int rc; |
| |
| for (i = 0; i < num_reg; i++) { |
| rc = regulator_set_optimum_mode(haptic->regs[i], |
| on ? reg_info[i].load_uA : 0); |
| if (rc < 0) { |
| pr_err("%s: regulator_set_optimum_mode failed(%d)\n", |
| __func__, rc); |
| goto regs_fail; |
| } |
| |
| rc = on ? regulator_enable(haptic->regs[i]) : |
| regulator_disable(haptic->regs[i]); |
| if (rc < 0) { |
| pr_err("%s: regulator %sable fail %d\n", __func__, |
| on ? "en" : "dis", rc); |
| regulator_set_optimum_mode(haptic->regs[i], |
| !on ? reg_info[i].load_uA : 0); |
| goto regs_fail; |
| } |
| } |
| |
| return 0; |
| |
| regs_fail: |
| while (i--) { |
| regulator_set_optimum_mode(haptic->regs[i], |
| !on ? reg_info[i].load_uA : 0); |
| !on ? regulator_enable(haptic->regs[i]) : |
| regulator_disable(haptic->regs[i]); |
| } |
| return rc; |
| } |
| |
| static int isa1200_reg_setup(struct isa1200_chip *haptic, bool on) |
| { |
| const struct isa1200_regulator *reg_info = |
| haptic->pdata->regulator_info; |
| u8 i, num_reg = haptic->pdata->num_regulators; |
| int rc = 0; |
| |
| /* put regulators */ |
| if (on == false) { |
| i = num_reg; |
| goto put_regs; |
| } |
| |
| haptic->regs = kzalloc(num_reg * sizeof(struct regulator *), |
| GFP_KERNEL); |
| if (!haptic->regs) { |
| pr_err("unable to allocate memory\n"); |
| return -ENOMEM; |
| } |
| |
| for (i = 0; i < num_reg; i++) { |
| haptic->regs[i] = regulator_get(&haptic->client->dev, |
| reg_info[i].name); |
| if (IS_ERR(haptic->regs[i])) { |
| rc = PTR_ERR(haptic->regs[i]); |
| pr_err("%s:regulator get failed(%d)\n", __func__, rc); |
| goto put_regs; |
| } |
| |
| if (regulator_count_voltages(haptic->regs[i]) > 0) { |
| rc = regulator_set_voltage(haptic->regs[i], |
| reg_info[i].min_uV, reg_info[i].max_uV); |
| if (rc) { |
| pr_err("%s: regulator_set_voltage failed(%d)\n", |
| __func__, rc); |
| regulator_put(haptic->regs[i]); |
| goto put_regs; |
| } |
| } |
| } |
| |
| return rc; |
| |
| put_regs: |
| while (i--) { |
| if (regulator_count_voltages(haptic->regs[i]) > 0) |
| regulator_set_voltage(haptic->regs[i], 0, |
| reg_info[i].max_uV); |
| regulator_put(haptic->regs[i]); |
| } |
| kfree(haptic->regs); |
| return rc; |
| } |
| |
| static int __devinit isa1200_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct isa1200_chip *haptic; |
| struct isa1200_platform_data *pdata; |
| int ret; |
| |
| if (!i2c_check_functionality(client->adapter, |
| I2C_FUNC_SMBUS_BYTE_DATA)) { |
| dev_err(&client->dev, "%s: no support for i2c read/write" |
| "byte data\n", __func__); |
| return -EIO; |
| } |
| |
| pdata = client->dev.platform_data; |
| if (!pdata) { |
| dev_err(&client->dev, "%s: no platform data\n", __func__); |
| return -EINVAL; |
| } |
| |
| if (pdata->dev_setup) { |
| ret = pdata->dev_setup(true); |
| if (ret < 0) { |
| dev_err(&client->dev, "dev setup failed\n"); |
| return -EINVAL; |
| } |
| } |
| |
| haptic = kzalloc(sizeof(struct isa1200_chip), GFP_KERNEL); |
| if (!haptic) { |
| ret = -ENOMEM; |
| goto mem_alloc_fail; |
| } |
| haptic->client = client; |
| haptic->enable = 0; |
| haptic->pdata = pdata; |
| |
| if (pdata->regulator_info) { |
| ret = isa1200_reg_setup(haptic, true); |
| if (ret) { |
| dev_err(&client->dev, "%s: regulator setup failed\n", |
| __func__); |
| goto reg_setup_fail; |
| } |
| |
| ret = isa1200_reg_power(haptic, true); |
| if (ret) { |
| dev_err(&client->dev, "%s: regulator power failed\n", |
| __func__); |
| goto reg_pwr_fail; |
| } |
| } |
| |
| if (pdata->power_on) { |
| ret = pdata->power_on(1); |
| if (ret) { |
| dev_err(&client->dev, "%s: power-up failed\n", |
| __func__); |
| goto pwr_up_fail; |
| } |
| } |
| |
| spin_lock_init(&haptic->lock); |
| INIT_WORK(&haptic->work, isa1200_chip_work); |
| |
| hrtimer_init(&haptic->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); |
| haptic->timer.function = isa1200_vib_timer_func; |
| |
| /*register with timed output class*/ |
| haptic->dev.name = pdata->name; |
| haptic->dev.get_time = isa1200_chip_get_time; |
| haptic->dev.enable = isa1200_chip_enable; |
| ret = timed_output_dev_register(&haptic->dev); |
| if (ret < 0) |
| goto timed_reg_fail; |
| |
| i2c_set_clientdata(client, haptic); |
| |
| ret = gpio_is_valid(pdata->hap_en_gpio); |
| if (ret) { |
| ret = gpio_request(pdata->hap_en_gpio, "haptic_en_gpio"); |
| if (ret) { |
| dev_err(&client->dev, "%s: gpio %d request failed\n", |
| __func__, pdata->hap_en_gpio); |
| goto hen_gpio_fail; |
| } |
| } else { |
| dev_err(&client->dev, "%s: Invalid gpio %d\n", __func__, |
| pdata->hap_en_gpio); |
| goto hen_gpio_fail; |
| } |
| |
| haptic->is_len_gpio_valid = true; |
| ret = gpio_is_valid(haptic->pdata->hap_len_gpio); |
| if (ret) { |
| ret = gpio_request(pdata->hap_len_gpio, |
| "haptic_ldo_gpio"); |
| if (ret) { |
| dev_err(&client->dev, |
| "%s: gpio %d request failed\n", |
| __func__, pdata->hap_len_gpio); |
| goto len_gpio_fail; |
| } |
| } else { |
| dev_err(&client->dev, "%s: gpio is not used/Invalid %d\n", |
| __func__, pdata->hap_len_gpio); |
| haptic->is_len_gpio_valid = false; |
| } |
| |
| ret = isa1200_setup(client); |
| if (ret) { |
| dev_err(&client->dev, "%s: setup fail %d\n", __func__, ret); |
| goto setup_fail; |
| } |
| |
| if (haptic->pdata->mode_ctrl == PWM_INPUT_MODE) { |
| haptic->pwm = pwm_request(pdata->pwm_ch_id, id->name); |
| if (IS_ERR(haptic->pwm)) { |
| dev_err(&client->dev, "%s: pwm request failed\n", |
| __func__); |
| ret = PTR_ERR(haptic->pwm); |
| goto reset_hctrl0; |
| } |
| } |
| |
| printk(KERN_INFO "%s: %s registered\n", __func__, id->name); |
| return 0; |
| |
| reset_hctrl0: |
| gpio_set_value_cansleep(haptic->pdata->hap_en_gpio, 0); |
| if (haptic->is_len_gpio_valid == true) |
| gpio_set_value_cansleep(haptic->pdata->hap_len_gpio, 0); |
| i2c_smbus_write_byte_data(client, ISA1200_HCTRL1, |
| ISA1200_HCTRL1_RESET); |
| i2c_smbus_write_byte_data(client, ISA1200_HCTRL0, |
| ISA1200_HCTRL0_RESET); |
| setup_fail: |
| if (haptic->is_len_gpio_valid == true) |
| gpio_free(pdata->hap_len_gpio); |
| len_gpio_fail: |
| gpio_free(pdata->hap_en_gpio); |
| hen_gpio_fail: |
| timed_output_dev_unregister(&haptic->dev); |
| timed_reg_fail: |
| if (pdata->power_on) |
| pdata->power_on(0); |
| pwr_up_fail: |
| if (pdata->regulator_info) |
| isa1200_reg_power(haptic, false); |
| reg_pwr_fail: |
| if (pdata->regulator_info) |
| isa1200_reg_setup(haptic, false); |
| reg_setup_fail: |
| kfree(haptic); |
| mem_alloc_fail: |
| if (pdata->dev_setup) |
| pdata->dev_setup(false); |
| return ret; |
| } |
| |
| static int __devexit isa1200_remove(struct i2c_client *client) |
| { |
| struct isa1200_chip *haptic = i2c_get_clientdata(client); |
| |
| hrtimer_cancel(&haptic->timer); |
| cancel_work_sync(&haptic->work); |
| |
| /* turn-off current vibration */ |
| isa1200_vib_set(haptic, 0); |
| |
| if (haptic->pdata->mode_ctrl == PWM_INPUT_MODE) |
| pwm_free(haptic->pwm); |
| |
| timed_output_dev_unregister(&haptic->dev); |
| |
| gpio_set_value_cansleep(haptic->pdata->hap_en_gpio, 0); |
| if (haptic->is_len_gpio_valid == true) |
| gpio_set_value_cansleep(haptic->pdata->hap_len_gpio, 0); |
| |
| gpio_free(haptic->pdata->hap_en_gpio); |
| if (haptic->is_len_gpio_valid == true) |
| gpio_free(haptic->pdata->hap_len_gpio); |
| |
| /* reset hardware registers */ |
| i2c_smbus_write_byte_data(client, ISA1200_HCTRL0, |
| ISA1200_HCTRL0_RESET); |
| i2c_smbus_write_byte_data(client, ISA1200_HCTRL1, |
| ISA1200_HCTRL1_RESET); |
| |
| |
| /* power-off the chip */ |
| if (haptic->pdata->regulator_info) { |
| isa1200_reg_power(haptic, false); |
| isa1200_reg_setup(haptic, false); |
| } |
| |
| if (haptic->pdata->power_on) |
| haptic->pdata->power_on(0); |
| |
| if (haptic->pdata->dev_setup) |
| haptic->pdata->dev_setup(false); |
| |
| kfree(haptic); |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int isa1200_suspend(struct i2c_client *client, pm_message_t mesg) |
| { |
| struct isa1200_chip *haptic = i2c_get_clientdata(client); |
| int ret; |
| |
| hrtimer_cancel(&haptic->timer); |
| cancel_work_sync(&haptic->work); |
| /* turn-off current vibration */ |
| isa1200_vib_set(haptic, 0); |
| |
| gpio_set_value_cansleep(haptic->pdata->hap_en_gpio, 0); |
| if (haptic->is_len_gpio_valid == true) |
| gpio_set_value_cansleep(haptic->pdata->hap_len_gpio, 0); |
| |
| if (haptic->pdata->regulator_info) |
| isa1200_reg_power(haptic, false); |
| |
| if (haptic->pdata->power_on) { |
| ret = haptic->pdata->power_on(0); |
| if (ret) { |
| dev_err(&client->dev, "power-down failed\n"); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int isa1200_resume(struct i2c_client *client) |
| { |
| struct isa1200_chip *haptic = i2c_get_clientdata(client); |
| int ret; |
| |
| if (haptic->pdata->regulator_info) |
| isa1200_reg_power(haptic, true); |
| |
| if (haptic->pdata->power_on) { |
| ret = haptic->pdata->power_on(1); |
| if (ret) { |
| dev_err(&client->dev, "power-up failed\n"); |
| return ret; |
| } |
| } |
| |
| isa1200_setup(client); |
| return 0; |
| } |
| #else |
| #define isa1200_suspend NULL |
| #define isa1200_resume NULL |
| #endif |
| |
| static const struct i2c_device_id isa1200_id[] = { |
| { "isa1200_1", 0 }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(i2c, isa1200_id); |
| |
| static struct i2c_driver isa1200_driver = { |
| .driver = { |
| .name = "isa1200", |
| }, |
| .probe = isa1200_probe, |
| .remove = __devexit_p(isa1200_remove), |
| .suspend = isa1200_suspend, |
| .resume = isa1200_resume, |
| .id_table = isa1200_id, |
| }; |
| |
| static int __init isa1200_init(void) |
| { |
| return i2c_add_driver(&isa1200_driver); |
| } |
| |
| static void __exit isa1200_exit(void) |
| { |
| i2c_del_driver(&isa1200_driver); |
| } |
| |
| module_init(isa1200_init); |
| module_exit(isa1200_exit); |
| |
| MODULE_AUTHOR("Kyungmin Park <kyungmin.park@samsung.com>"); |
| MODULE_DESCRIPTION("ISA1200 Haptic Motor driver"); |
| MODULE_LICENSE("GPL"); |