| /* |
| * linux/arch/arm/mm/proc-v6.S |
| * |
| * Copyright (C) 2001 Deep Blue Solutions Ltd. |
| * Modified by Catalin Marinas for noMMU support |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This is the "shell" of the ARMv6 processor support. |
| */ |
| #include <linux/init.h> |
| #include <linux/linkage.h> |
| #include <asm/assembler.h> |
| #include <asm/asm-offsets.h> |
| #include <asm/hwcap.h> |
| #include <asm/pgtable-hwdef.h> |
| #include <asm/pgtable.h> |
| |
| #include "proc-macros.S" |
| |
| #define D_CACHE_LINE_SIZE 32 |
| |
| #define TTB_C (1 << 0) |
| #define TTB_S (1 << 1) |
| #define TTB_IMP (1 << 2) |
| #define TTB_RGN_NC (0 << 3) |
| #define TTB_RGN_WBWA (1 << 3) |
| #define TTB_RGN_WT (2 << 3) |
| #define TTB_RGN_WB (3 << 3) |
| |
| #define TTB_FLAGS_UP TTB_RGN_WBWA |
| #define PMD_FLAGS_UP PMD_SECT_WB |
| #define TTB_FLAGS_SMP TTB_RGN_WBWA|TTB_S |
| #define PMD_FLAGS_SMP PMD_SECT_WBWA|PMD_SECT_S |
| |
| ENTRY(cpu_v6_proc_init) |
| mov pc, lr |
| |
| ENTRY(cpu_v6_proc_fin) |
| mrc p15, 0, r0, c1, c0, 0 @ ctrl register |
| bic r0, r0, #0x1000 @ ...i............ |
| bic r0, r0, #0x0006 @ .............ca. |
| mcr p15, 0, r0, c1, c0, 0 @ disable caches |
| mov pc, lr |
| |
| /* |
| * cpu_v6_reset(loc) |
| * |
| * Perform a soft reset of the system. Put the CPU into the |
| * same state as it would be if it had been reset, and branch |
| * to what would be the reset vector. |
| * |
| * - loc - location to jump to for soft reset |
| */ |
| .align 5 |
| ENTRY(cpu_v6_reset) |
| mov pc, r0 |
| |
| /* |
| * cpu_v6_do_idle() |
| * |
| * Idle the processor (eg, wait for interrupt). |
| * |
| * IRQs are already disabled. |
| */ |
| ENTRY(cpu_v6_do_idle) |
| mov r1, #0 |
| mcr p15, 0, r1, c7, c10, 4 @ DWB - WFI may enter a low-power mode |
| mcr p15, 0, r1, c7, c0, 4 @ wait for interrupt |
| mov pc, lr |
| |
| ENTRY(cpu_v6_dcache_clean_area) |
| #ifndef TLB_CAN_READ_FROM_L1_CACHE |
| 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry |
| add r0, r0, #D_CACHE_LINE_SIZE |
| subs r1, r1, #D_CACHE_LINE_SIZE |
| bhi 1b |
| #endif |
| mov pc, lr |
| |
| /* |
| * cpu_arm926_switch_mm(pgd_phys, tsk) |
| * |
| * Set the translation table base pointer to be pgd_phys |
| * |
| * - pgd_phys - physical address of new TTB |
| * |
| * It is assumed that: |
| * - we are not using split page tables |
| */ |
| ENTRY(cpu_v6_switch_mm) |
| #ifdef CONFIG_MMU |
| mov r2, #0 |
| ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id |
| ALT_SMP(orr r0, r0, #TTB_FLAGS_SMP) |
| ALT_UP(orr r0, r0, #TTB_FLAGS_UP) |
| mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB |
| mcr p15, 0, r2, c7, c10, 4 @ drain write buffer |
| mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 |
| mcr p15, 0, r1, c13, c0, 1 @ set context ID |
| #endif |
| mov pc, lr |
| |
| /* |
| * cpu_v6_set_pte_ext(ptep, pte, ext) |
| * |
| * Set a level 2 translation table entry. |
| * |
| * - ptep - pointer to level 2 translation table entry |
| * (hardware version is stored at -1024 bytes) |
| * - pte - PTE value to store |
| * - ext - value for extended PTE bits |
| */ |
| armv6_mt_table cpu_v6 |
| |
| ENTRY(cpu_v6_set_pte_ext) |
| #ifdef CONFIG_MMU |
| armv6_set_pte_ext cpu_v6 |
| #endif |
| mov pc, lr |
| |
| |
| |
| .type cpu_v6_name, #object |
| cpu_v6_name: |
| .asciz "ARMv6-compatible processor" |
| .size cpu_v6_name, . - cpu_v6_name |
| |
| .type cpu_pj4_name, #object |
| cpu_pj4_name: |
| .asciz "Marvell PJ4 processor" |
| .size cpu_pj4_name, . - cpu_pj4_name |
| |
| .align |
| |
| __INIT |
| |
| /* |
| * __v6_setup |
| * |
| * Initialise TLB, Caches, and MMU state ready to switch the MMU |
| * on. Return in r0 the new CP15 C1 control register setting. |
| * |
| * We automatically detect if we have a Harvard cache, and use the |
| * Harvard cache control instructions insead of the unified cache |
| * control instructions. |
| * |
| * This should be able to cover all ARMv6 cores. |
| * |
| * It is assumed that: |
| * - cache type register is implemented |
| */ |
| __v6_setup: |
| #ifdef CONFIG_SMP |
| ALT_SMP(mrc p15, 0, r0, c1, c0, 1) @ Enable SMP/nAMP mode |
| ALT_UP(nop) |
| orr r0, r0, #0x20 |
| ALT_SMP(mcr p15, 0, r0, c1, c0, 1) |
| ALT_UP(nop) |
| #endif |
| |
| mov r0, #0 |
| mcr p15, 0, r0, c7, c14, 0 @ clean+invalidate D cache |
| mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache |
| mcr p15, 0, r0, c7, c15, 0 @ clean+invalidate cache |
| mcr p15, 0, r0, c7, c10, 4 @ drain write buffer |
| #ifdef CONFIG_MMU |
| mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs |
| mcr p15, 0, r0, c2, c0, 2 @ TTB control register |
| ALT_SMP(orr r4, r4, #TTB_FLAGS_SMP) |
| ALT_UP(orr r4, r4, #TTB_FLAGS_UP) |
| mcr p15, 0, r4, c2, c0, 1 @ load TTB1 |
| #endif /* CONFIG_MMU */ |
| adr r5, v6_crval |
| ldmia r5, {r5, r6} |
| #ifdef CONFIG_CPU_ENDIAN_BE8 |
| orr r6, r6, #1 << 25 @ big-endian page tables |
| #endif |
| mrc p15, 0, r0, c1, c0, 0 @ read control register |
| bic r0, r0, r5 @ clear bits them |
| orr r0, r0, r6 @ set them |
| mov pc, lr @ return to head.S:__ret |
| |
| /* |
| * V X F I D LR |
| * .... ...E PUI. .T.T 4RVI ZFRS BLDP WCAM |
| * rrrr rrrx xxx0 0101 xxxx xxxx x111 xxxx < forced |
| * 0 110 0011 1.00 .111 1101 < we want |
| */ |
| .type v6_crval, #object |
| v6_crval: |
| crval clear=0x01e0fb7f, mmuset=0x00c0387d, ucset=0x00c0187c |
| |
| .type v6_processor_functions, #object |
| ENTRY(v6_processor_functions) |
| .word v6_early_abort |
| .word v6_pabort |
| .word cpu_v6_proc_init |
| .word cpu_v6_proc_fin |
| .word cpu_v6_reset |
| .word cpu_v6_do_idle |
| .word cpu_v6_dcache_clean_area |
| .word cpu_v6_switch_mm |
| .word cpu_v6_set_pte_ext |
| .size v6_processor_functions, . - v6_processor_functions |
| |
| .type cpu_arch_name, #object |
| cpu_arch_name: |
| .asciz "armv6" |
| .size cpu_arch_name, . - cpu_arch_name |
| |
| .type cpu_elf_name, #object |
| cpu_elf_name: |
| .asciz "v6" |
| .size cpu_elf_name, . - cpu_elf_name |
| .align |
| |
| .section ".proc.info.init", #alloc, #execinstr |
| |
| /* |
| * Match any ARMv6 processor core. |
| */ |
| .type __v6_proc_info, #object |
| __v6_proc_info: |
| .long 0x0007b000 |
| .long 0x0007f000 |
| ALT_SMP(.long \ |
| PMD_TYPE_SECT | \ |
| PMD_SECT_AP_WRITE | \ |
| PMD_SECT_AP_READ | \ |
| PMD_FLAGS_SMP) |
| ALT_UP(.long \ |
| PMD_TYPE_SECT | \ |
| PMD_SECT_AP_WRITE | \ |
| PMD_SECT_AP_READ | \ |
| PMD_FLAGS_UP) |
| .long PMD_TYPE_SECT | \ |
| PMD_SECT_XN | \ |
| PMD_SECT_AP_WRITE | \ |
| PMD_SECT_AP_READ |
| b __v6_setup |
| .long cpu_arch_name |
| .long cpu_elf_name |
| /* See also feat_v6_fixup() for HWCAP_TLS */ |
| .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_JAVA|HWCAP_TLS |
| .long cpu_v6_name |
| .long v6_processor_functions |
| .long v6wbi_tlb_fns |
| .long v6_user_fns |
| .long v6_cache_fns |
| .size __v6_proc_info, . - __v6_proc_info |
| |
| .type __pj4_v6_proc_info, #object |
| __pj4_v6_proc_info: |
| .long 0x560f5810 |
| .long 0xff0ffff0 |
| ALT_SMP(.long \ |
| PMD_TYPE_SECT | \ |
| PMD_SECT_AP_WRITE | \ |
| PMD_SECT_AP_READ | \ |
| PMD_FLAGS_SMP) |
| ALT_UP(.long \ |
| PMD_TYPE_SECT | \ |
| PMD_SECT_AP_WRITE | \ |
| PMD_SECT_AP_READ | \ |
| PMD_FLAGS_UP) |
| .long PMD_TYPE_SECT | \ |
| PMD_SECT_XN | \ |
| PMD_SECT_AP_WRITE | \ |
| PMD_SECT_AP_READ |
| b __v6_setup |
| .long cpu_arch_name |
| .long cpu_elf_name |
| .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS |
| .long cpu_pj4_name |
| .long v6_processor_functions |
| .long v6wbi_tlb_fns |
| .long v6_user_fns |
| .long v6_cache_fns |
| .size __pj4_v6_proc_info, . - __pj4_v6_proc_info |