| /* |
| * Copyright (c) 2005-2010 Brocade Communications Systems, Inc. |
| * All rights reserved |
| * www.brocade.com |
| * |
| * Linux driver for Brocade Fibre Channel Host Bus Adapter. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License (GPL) Version 2 as |
| * published by the Free Software Foundation |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| */ |
| |
| #ifndef __BFA_DEFS_H__ |
| #define __BFA_DEFS_H__ |
| |
| #include "bfa_fc.h" |
| #include "bfad_drv.h" |
| |
| #define BFA_MFG_SERIALNUM_SIZE 11 |
| #define STRSZ(_n) (((_n) + 4) & ~3) |
| |
| /* |
| * Manufacturing card type |
| */ |
| enum { |
| BFA_MFG_TYPE_CB_MAX = 825, /* Crossbow card type max */ |
| BFA_MFG_TYPE_FC8P2 = 825, /* 8G 2port FC card */ |
| BFA_MFG_TYPE_FC8P1 = 815, /* 8G 1port FC card */ |
| BFA_MFG_TYPE_FC4P2 = 425, /* 4G 2port FC card */ |
| BFA_MFG_TYPE_FC4P1 = 415, /* 4G 1port FC card */ |
| BFA_MFG_TYPE_CNA10P2 = 1020, /* 10G 2port CNA card */ |
| BFA_MFG_TYPE_CNA10P1 = 1010, /* 10G 1port CNA card */ |
| BFA_MFG_TYPE_JAYHAWK = 804, /* Jayhawk mezz card */ |
| BFA_MFG_TYPE_WANCHESE = 1007, /* Wanchese mezz card */ |
| BFA_MFG_TYPE_ASTRA = 807, /* Astra mezz card */ |
| BFA_MFG_TYPE_LIGHTNING_P0 = 902, /* Lightning mezz card - old */ |
| BFA_MFG_TYPE_LIGHTNING = 1741, /* Lightning mezz card */ |
| BFA_MFG_TYPE_INVALID = 0, /* Invalid card type */ |
| }; |
| |
| #pragma pack(1) |
| |
| /* |
| * Check if Mezz card |
| */ |
| #define bfa_mfg_is_mezz(type) (( \ |
| (type) == BFA_MFG_TYPE_JAYHAWK || \ |
| (type) == BFA_MFG_TYPE_WANCHESE || \ |
| (type) == BFA_MFG_TYPE_ASTRA || \ |
| (type) == BFA_MFG_TYPE_LIGHTNING_P0 || \ |
| (type) == BFA_MFG_TYPE_LIGHTNING)) |
| |
| /* |
| * Check if the card having old wwn/mac handling |
| */ |
| #define bfa_mfg_is_old_wwn_mac_model(type) (( \ |
| (type) == BFA_MFG_TYPE_FC8P2 || \ |
| (type) == BFA_MFG_TYPE_FC8P1 || \ |
| (type) == BFA_MFG_TYPE_FC4P2 || \ |
| (type) == BFA_MFG_TYPE_FC4P1 || \ |
| (type) == BFA_MFG_TYPE_CNA10P2 || \ |
| (type) == BFA_MFG_TYPE_CNA10P1 || \ |
| (type) == BFA_MFG_TYPE_JAYHAWK || \ |
| (type) == BFA_MFG_TYPE_WANCHESE)) |
| |
| #define bfa_mfg_increment_wwn_mac(m, i) \ |
| do { \ |
| u32 t = ((u32)(m)[0] << 16) | ((u32)(m)[1] << 8) | \ |
| (u32)(m)[2]; \ |
| t += (i); \ |
| (m)[0] = (t >> 16) & 0xFF; \ |
| (m)[1] = (t >> 8) & 0xFF; \ |
| (m)[2] = t & 0xFF; \ |
| } while (0) |
| |
| /* |
| * VPD data length |
| */ |
| #define BFA_MFG_VPD_LEN 512 |
| |
| /* |
| * VPD vendor tag |
| */ |
| enum { |
| BFA_MFG_VPD_UNKNOWN = 0, /* vendor unknown */ |
| BFA_MFG_VPD_IBM = 1, /* vendor IBM */ |
| BFA_MFG_VPD_HP = 2, /* vendor HP */ |
| BFA_MFG_VPD_DELL = 3, /* vendor DELL */ |
| BFA_MFG_VPD_PCI_IBM = 0x08, /* PCI VPD IBM */ |
| BFA_MFG_VPD_PCI_HP = 0x10, /* PCI VPD HP */ |
| BFA_MFG_VPD_PCI_DELL = 0x20, /* PCI VPD DELL */ |
| BFA_MFG_VPD_PCI_BRCD = 0xf8, /* PCI VPD Brocade */ |
| }; |
| |
| /* |
| * All numerical fields are in big-endian format. |
| */ |
| struct bfa_mfg_vpd_s { |
| u8 version; /* vpd data version */ |
| u8 vpd_sig[3]; /* characters 'V', 'P', 'D' */ |
| u8 chksum; /* u8 checksum */ |
| u8 vendor; /* vendor */ |
| u8 len; /* vpd data length excluding header */ |
| u8 rsv; |
| u8 data[BFA_MFG_VPD_LEN]; /* vpd data */ |
| }; |
| |
| #pragma pack() |
| |
| /* |
| * Status return values |
| */ |
| enum bfa_status { |
| BFA_STATUS_OK = 0, /* Success */ |
| BFA_STATUS_FAILED = 1, /* Operation failed */ |
| BFA_STATUS_EINVAL = 2, /* Invalid params Check input |
| * parameters */ |
| BFA_STATUS_ENOMEM = 3, /* Out of resources */ |
| BFA_STATUS_ETIMER = 5, /* Timer expired - Retry, if persists, |
| * contact support */ |
| BFA_STATUS_EPROTOCOL = 6, /* Protocol error */ |
| BFA_STATUS_DEVBUSY = 13, /* Device busy - Retry operation */ |
| BFA_STATUS_UNKNOWN_LWWN = 18, /* LPORT PWWN not found */ |
| BFA_STATUS_UNKNOWN_RWWN = 19, /* RPORT PWWN not found */ |
| BFA_STATUS_VPORT_EXISTS = 21, /* VPORT already exists */ |
| BFA_STATUS_VPORT_MAX = 22, /* Reached max VPORT supported limit */ |
| BFA_STATUS_UNSUPP_SPEED = 23, /* Invalid Speed Check speed setting */ |
| BFA_STATUS_INVLD_DFSZ = 24, /* Invalid Max data field size */ |
| BFA_STATUS_FABRIC_RJT = 29, /* Reject from attached fabric */ |
| BFA_STATUS_VPORT_WWN_BP = 46, /* WWN is same as base port's WWN */ |
| BFA_STATUS_NO_FCPIM_NEXUS = 52, /* No FCP Nexus exists with the rport */ |
| BFA_STATUS_IOC_FAILURE = 56, /* IOC failure - Retry, if persists |
| * contact support */ |
| BFA_STATUS_INVALID_WWN = 57, /* Invalid WWN */ |
| BFA_STATUS_DIAG_BUSY = 71, /* diag busy */ |
| BFA_STATUS_ENOFSAVE = 78, /* No saved firmware trace */ |
| BFA_STATUS_IOC_DISABLED = 82, /* IOC is already disabled */ |
| BFA_STATUS_INVALID_MAC = 134, /* Invalid MAC address */ |
| BFA_STATUS_PBC = 154, /* Operation not allowed for pre-boot |
| * configuration */ |
| BFA_STATUS_TRUNK_ENABLED = 164, /* Trunk is already enabled on |
| * this adapter */ |
| BFA_STATUS_TRUNK_DISABLED = 165, /* Trunking is disabled on |
| * the adapter */ |
| BFA_STATUS_IOPROFILE_OFF = 175, /* IO profile OFF */ |
| BFA_STATUS_MAX_VAL /* Unknown error code */ |
| }; |
| #define bfa_status_t enum bfa_status |
| |
| enum bfa_eproto_status { |
| BFA_EPROTO_BAD_ACCEPT = 0, |
| BFA_EPROTO_UNKNOWN_RSP = 1 |
| }; |
| #define bfa_eproto_status_t enum bfa_eproto_status |
| |
| enum bfa_boolean { |
| BFA_FALSE = 0, |
| BFA_TRUE = 1 |
| }; |
| #define bfa_boolean_t enum bfa_boolean |
| |
| #define BFA_STRING_32 32 |
| #define BFA_VERSION_LEN 64 |
| |
| /* |
| * ---------------------- adapter definitions ------------ |
| */ |
| |
| /* |
| * BFA adapter level attributes. |
| */ |
| enum { |
| BFA_ADAPTER_SERIAL_NUM_LEN = STRSZ(BFA_MFG_SERIALNUM_SIZE), |
| /* |
| *!< adapter serial num length |
| */ |
| BFA_ADAPTER_MODEL_NAME_LEN = 16, /* model name length */ |
| BFA_ADAPTER_MODEL_DESCR_LEN = 128, /* model description length */ |
| BFA_ADAPTER_MFG_NAME_LEN = 8, /* manufacturer name length */ |
| BFA_ADAPTER_SYM_NAME_LEN = 64, /* adapter symbolic name length */ |
| BFA_ADAPTER_OS_TYPE_LEN = 64, /* adapter os type length */ |
| }; |
| |
| struct bfa_adapter_attr_s { |
| char manufacturer[BFA_ADAPTER_MFG_NAME_LEN]; |
| char serial_num[BFA_ADAPTER_SERIAL_NUM_LEN]; |
| u32 card_type; |
| char model[BFA_ADAPTER_MODEL_NAME_LEN]; |
| char model_descr[BFA_ADAPTER_MODEL_DESCR_LEN]; |
| wwn_t pwwn; |
| char node_symname[FC_SYMNAME_MAX]; |
| char hw_ver[BFA_VERSION_LEN]; |
| char fw_ver[BFA_VERSION_LEN]; |
| char optrom_ver[BFA_VERSION_LEN]; |
| char os_type[BFA_ADAPTER_OS_TYPE_LEN]; |
| struct bfa_mfg_vpd_s vpd; |
| struct mac_s mac; |
| |
| u8 nports; |
| u8 max_speed; |
| u8 prototype; |
| char asic_rev; |
| |
| u8 pcie_gen; |
| u8 pcie_lanes_orig; |
| u8 pcie_lanes; |
| u8 cna_capable; |
| |
| u8 is_mezz; |
| u8 trunk_capable; |
| }; |
| |
| /* |
| * ---------------------- IOC definitions ------------ |
| */ |
| |
| enum { |
| BFA_IOC_DRIVER_LEN = 16, |
| BFA_IOC_CHIP_REV_LEN = 8, |
| }; |
| |
| /* |
| * Driver and firmware versions. |
| */ |
| struct bfa_ioc_driver_attr_s { |
| char driver[BFA_IOC_DRIVER_LEN]; /* driver name */ |
| char driver_ver[BFA_VERSION_LEN]; /* driver version */ |
| char fw_ver[BFA_VERSION_LEN]; /* firmware version */ |
| char bios_ver[BFA_VERSION_LEN]; /* bios version */ |
| char efi_ver[BFA_VERSION_LEN]; /* EFI version */ |
| char ob_ver[BFA_VERSION_LEN]; /* openboot version */ |
| }; |
| |
| /* |
| * IOC PCI device attributes |
| */ |
| struct bfa_ioc_pci_attr_s { |
| u16 vendor_id; /* PCI vendor ID */ |
| u16 device_id; /* PCI device ID */ |
| u16 ssid; /* subsystem ID */ |
| u16 ssvid; /* subsystem vendor ID */ |
| u32 pcifn; /* PCI device function */ |
| u32 rsvd; /* padding */ |
| char chip_rev[BFA_IOC_CHIP_REV_LEN]; /* chip revision */ |
| }; |
| |
| /* |
| * IOC states |
| */ |
| enum bfa_ioc_state { |
| BFA_IOC_UNINIT = 1, /* IOC is in uninit state */ |
| BFA_IOC_RESET = 2, /* IOC is in reset state */ |
| BFA_IOC_SEMWAIT = 3, /* Waiting for IOC h/w semaphore */ |
| BFA_IOC_HWINIT = 4, /* IOC h/w is being initialized */ |
| BFA_IOC_GETATTR = 5, /* IOC is being configured */ |
| BFA_IOC_OPERATIONAL = 6, /* IOC is operational */ |
| BFA_IOC_INITFAIL = 7, /* IOC hardware failure */ |
| BFA_IOC_FAIL = 8, /* IOC heart-beat failure */ |
| BFA_IOC_DISABLING = 9, /* IOC is being disabled */ |
| BFA_IOC_DISABLED = 10, /* IOC is disabled */ |
| BFA_IOC_FWMISMATCH = 11, /* IOC f/w different from drivers */ |
| BFA_IOC_ENABLING = 12, /* IOC is being enabled */ |
| }; |
| |
| /* |
| * IOC firmware stats |
| */ |
| struct bfa_fw_ioc_stats_s { |
| u32 enable_reqs; |
| u32 disable_reqs; |
| u32 get_attr_reqs; |
| u32 dbg_sync; |
| u32 dbg_dump; |
| u32 unknown_reqs; |
| }; |
| |
| /* |
| * IOC driver stats |
| */ |
| struct bfa_ioc_drv_stats_s { |
| u32 ioc_isrs; |
| u32 ioc_enables; |
| u32 ioc_disables; |
| u32 ioc_hbfails; |
| u32 ioc_boots; |
| u32 stats_tmos; |
| u32 hb_count; |
| u32 disable_reqs; |
| u32 enable_reqs; |
| u32 disable_replies; |
| u32 enable_replies; |
| }; |
| |
| /* |
| * IOC statistics |
| */ |
| struct bfa_ioc_stats_s { |
| struct bfa_ioc_drv_stats_s drv_stats; /* driver IOC stats */ |
| struct bfa_fw_ioc_stats_s fw_stats; /* firmware IOC stats */ |
| }; |
| |
| enum bfa_ioc_type_e { |
| BFA_IOC_TYPE_FC = 1, |
| BFA_IOC_TYPE_FCoE = 2, |
| BFA_IOC_TYPE_LL = 3, |
| }; |
| |
| /* |
| * IOC attributes returned in queries |
| */ |
| struct bfa_ioc_attr_s { |
| enum bfa_ioc_type_e ioc_type; |
| enum bfa_ioc_state state; /* IOC state */ |
| struct bfa_adapter_attr_s adapter_attr; /* HBA attributes */ |
| struct bfa_ioc_driver_attr_s driver_attr; /* driver attr */ |
| struct bfa_ioc_pci_attr_s pci_attr; |
| u8 port_id; /* port number */ |
| u8 rsvd[7]; /* 64bit align */ |
| }; |
| |
| /* |
| * ---------------------- mfg definitions ------------ |
| */ |
| |
| /* |
| * Checksum size |
| */ |
| #define BFA_MFG_CHKSUM_SIZE 16 |
| |
| #define BFA_MFG_PARTNUM_SIZE 14 |
| #define BFA_MFG_SUPPLIER_ID_SIZE 10 |
| #define BFA_MFG_SUPPLIER_PARTNUM_SIZE 20 |
| #define BFA_MFG_SUPPLIER_SERIALNUM_SIZE 20 |
| #define BFA_MFG_SUPPLIER_REVISION_SIZE 4 |
| |
| #pragma pack(1) |
| |
| /* |
| * All numerical fields are in big-endian format. |
| */ |
| struct bfa_mfg_block_s { |
| u8 version; /* manufacturing block version */ |
| u8 mfg_sig[3]; /* characters 'M', 'F', 'G' */ |
| u16 mfgsize; /* mfg block size */ |
| u16 u16_chksum; /* old u16 checksum */ |
| char brcd_serialnum[STRSZ(BFA_MFG_SERIALNUM_SIZE)]; |
| char brcd_partnum[STRSZ(BFA_MFG_PARTNUM_SIZE)]; |
| u8 mfg_day; /* manufacturing day */ |
| u8 mfg_month; /* manufacturing month */ |
| u16 mfg_year; /* manufacturing year */ |
| wwn_t mfg_wwn; /* wwn base for this adapter */ |
| u8 num_wwn; /* number of wwns assigned */ |
| u8 mfg_speeds; /* speeds allowed for this adapter */ |
| u8 rsv[2]; |
| char supplier_id[STRSZ(BFA_MFG_SUPPLIER_ID_SIZE)]; |
| char supplier_partnum[STRSZ(BFA_MFG_SUPPLIER_PARTNUM_SIZE)]; |
| char |
| supplier_serialnum[STRSZ(BFA_MFG_SUPPLIER_SERIALNUM_SIZE)]; |
| char |
| supplier_revision[STRSZ(BFA_MFG_SUPPLIER_REVISION_SIZE)]; |
| mac_t mfg_mac; /* mac address */ |
| u8 num_mac; /* number of mac addresses */ |
| u8 rsv2; |
| u32 mfg_type; /* card type */ |
| u8 rsv3[108]; |
| u8 md5_chksum[BFA_MFG_CHKSUM_SIZE]; /* md5 checksum */ |
| }; |
| |
| #pragma pack() |
| |
| /* |
| * ---------------------- pci definitions ------------ |
| */ |
| |
| /* |
| * PCI device and vendor ID information |
| */ |
| enum { |
| BFA_PCI_VENDOR_ID_BROCADE = 0x1657, |
| BFA_PCI_DEVICE_ID_FC_8G2P = 0x13, |
| BFA_PCI_DEVICE_ID_FC_8G1P = 0x17, |
| BFA_PCI_DEVICE_ID_CT = 0x14, |
| BFA_PCI_DEVICE_ID_CT_FC = 0x21, |
| }; |
| |
| #define bfa_asic_id_ct(devid) \ |
| ((devid) == BFA_PCI_DEVICE_ID_CT || \ |
| (devid) == BFA_PCI_DEVICE_ID_CT_FC) |
| |
| /* |
| * PCI sub-system device and vendor ID information |
| */ |
| enum { |
| BFA_PCI_FCOE_SSDEVICE_ID = 0x14, |
| }; |
| |
| /* |
| * Maximum number of device address ranges mapped through different BAR(s) |
| */ |
| #define BFA_PCI_ACCESS_RANGES 1 |
| |
| /* |
| * Port speed settings. Each specific speed is a bit field. Use multiple |
| * bits to specify speeds to be selected for auto-negotiation. |
| */ |
| enum bfa_port_speed { |
| BFA_PORT_SPEED_UNKNOWN = 0, |
| BFA_PORT_SPEED_1GBPS = 1, |
| BFA_PORT_SPEED_2GBPS = 2, |
| BFA_PORT_SPEED_4GBPS = 4, |
| BFA_PORT_SPEED_8GBPS = 8, |
| BFA_PORT_SPEED_10GBPS = 10, |
| BFA_PORT_SPEED_16GBPS = 16, |
| BFA_PORT_SPEED_AUTO = |
| (BFA_PORT_SPEED_1GBPS | BFA_PORT_SPEED_2GBPS | |
| BFA_PORT_SPEED_4GBPS | BFA_PORT_SPEED_8GBPS), |
| }; |
| #define bfa_port_speed_t enum bfa_port_speed |
| |
| enum { |
| BFA_BOOT_BOOTLUN_MAX = 4, /* maximum boot lun per IOC */ |
| BFA_PREBOOT_BOOTLUN_MAX = 8, /* maximum preboot lun per IOC */ |
| }; |
| |
| #define BOOT_CFG_REV1 1 |
| #define BOOT_CFG_VLAN 1 |
| |
| /* |
| * Boot options setting. Boot options setting determines from where |
| * to get the boot lun information |
| */ |
| enum bfa_boot_bootopt { |
| BFA_BOOT_AUTO_DISCOVER = 0, /* Boot from blun provided by fabric */ |
| BFA_BOOT_STORED_BLUN = 1, /* Boot from bluns stored in flash */ |
| BFA_BOOT_FIRST_LUN = 2, /* Boot from first discovered blun */ |
| BFA_BOOT_PBC = 3, /* Boot from pbc configured blun */ |
| }; |
| |
| #pragma pack(1) |
| /* |
| * Boot lun information. |
| */ |
| struct bfa_boot_bootlun_s { |
| wwn_t pwwn; /* port wwn of target */ |
| struct scsi_lun lun; /* 64-bit lun */ |
| }; |
| #pragma pack() |
| |
| /* |
| * BOOT boot configuraton |
| */ |
| struct bfa_boot_pbc_s { |
| u8 enable; /* enable/disable SAN boot */ |
| u8 speed; /* boot speed settings */ |
| u8 topology; /* boot topology setting */ |
| u8 rsvd1; |
| u32 nbluns; /* number of boot luns */ |
| struct bfa_boot_bootlun_s pblun[BFA_PREBOOT_BOOTLUN_MAX]; |
| }; |
| |
| #endif /* __BFA_DEFS_H__ */ |