| /* Copyright (c) 2011-2012, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/mfd/core.h> |
| #include <linux/mfd/wcd9310/wcd9310-slimslave.h> |
| #include <linux/mfd/pm8xxx/pm8921.h> |
| #include <linux/mfd/wcd9310/pdata.h> |
| #include <linux/mfd/wcd9310/registers.h> |
| #include <linux/delay.h> |
| #include <linux/gpio.h> |
| #include <linux/debugfs.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/i2c.h> |
| #include <sound/soc.h> |
| |
| #define TABLA_SLIM_GLA_MAX_RETRIES 5 |
| #define TABLA_REGISTER_START_OFFSET 0x800 |
| #define TABLA_SLIM_RW_MAX_TRIES 3 |
| |
| #define MAX_TABLA_DEVICE 4 |
| #define TABLA_I2C_MODE 0x03 |
| |
| struct tabla_i2c { |
| struct i2c_client *client; |
| struct i2c_msg xfer_msg[2]; |
| struct mutex xfer_lock; |
| int mod_id; |
| }; |
| |
| struct tabla_i2c tabla_modules[MAX_TABLA_DEVICE]; |
| static int tabla_intf; |
| |
| static int tabla_read(struct tabla *tabla, unsigned short reg, |
| int bytes, void *dest, bool interface_reg) |
| { |
| int ret; |
| u8 *buf = dest; |
| |
| if (bytes <= 0) { |
| dev_err(tabla->dev, "Invalid byte read length %d\n", bytes); |
| return -EINVAL; |
| } |
| |
| ret = tabla->read_dev(tabla, reg, bytes, dest, interface_reg); |
| if (ret < 0) { |
| dev_err(tabla->dev, "Tabla read failed\n"); |
| return ret; |
| } else |
| dev_dbg(tabla->dev, "Read 0x%02x from R%d(0x%x)\n", |
| *buf, reg, reg); |
| |
| return 0; |
| } |
| int tabla_reg_read(struct tabla *tabla, unsigned short reg) |
| { |
| u8 val; |
| int ret; |
| |
| mutex_lock(&tabla->io_lock); |
| ret = tabla_read(tabla, reg, 1, &val, false); |
| mutex_unlock(&tabla->io_lock); |
| |
| if (ret < 0) |
| return ret; |
| else |
| return val; |
| } |
| EXPORT_SYMBOL_GPL(tabla_reg_read); |
| |
| static int tabla_write(struct tabla *tabla, unsigned short reg, |
| int bytes, void *src, bool interface_reg) |
| { |
| u8 *buf = src; |
| |
| if (bytes <= 0) { |
| pr_err("%s: Error, invalid write length\n", __func__); |
| return -EINVAL; |
| } |
| |
| dev_dbg(tabla->dev, "Write %02x to R%d(0x%x)\n", |
| *buf, reg, reg); |
| |
| return tabla->write_dev(tabla, reg, bytes, src, interface_reg); |
| } |
| |
| int tabla_reg_write(struct tabla *tabla, unsigned short reg, |
| u8 val) |
| { |
| int ret; |
| |
| mutex_lock(&tabla->io_lock); |
| ret = tabla_write(tabla, reg, 1, &val, false); |
| mutex_unlock(&tabla->io_lock); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(tabla_reg_write); |
| |
| static u8 tabla_pgd_la; |
| static u8 tabla_inf_la; |
| |
| int tabla_get_logical_addresses(u8 *pgd_la, u8 *inf_la) |
| { |
| *pgd_la = tabla_pgd_la; |
| *inf_la = tabla_inf_la; |
| return 0; |
| |
| } |
| EXPORT_SYMBOL_GPL(tabla_get_logical_addresses); |
| |
| int tabla_interface_reg_read(struct tabla *tabla, unsigned short reg) |
| { |
| u8 val; |
| int ret; |
| |
| mutex_lock(&tabla->io_lock); |
| ret = tabla_read(tabla, reg, 1, &val, true); |
| mutex_unlock(&tabla->io_lock); |
| |
| if (ret < 0) |
| return ret; |
| else |
| return val; |
| } |
| EXPORT_SYMBOL_GPL(tabla_interface_reg_read); |
| |
| int tabla_interface_reg_write(struct tabla *tabla, unsigned short reg, |
| u8 val) |
| { |
| int ret; |
| |
| mutex_lock(&tabla->io_lock); |
| ret = tabla_write(tabla, reg, 1, &val, true); |
| mutex_unlock(&tabla->io_lock); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(tabla_interface_reg_write); |
| |
| int tabla_bulk_read(struct tabla *tabla, unsigned short reg, |
| int count, u8 *buf) |
| { |
| int ret; |
| |
| mutex_lock(&tabla->io_lock); |
| |
| ret = tabla_read(tabla, reg, count, buf, false); |
| |
| mutex_unlock(&tabla->io_lock); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(tabla_bulk_read); |
| |
| int tabla_bulk_write(struct tabla *tabla, unsigned short reg, |
| int count, u8 *buf) |
| { |
| int ret; |
| |
| mutex_lock(&tabla->io_lock); |
| |
| ret = tabla_write(tabla, reg, count, buf, false); |
| |
| mutex_unlock(&tabla->io_lock); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(tabla_bulk_write); |
| |
| static int tabla_slim_read_device(struct tabla *tabla, unsigned short reg, |
| int bytes, void *dest, bool interface) |
| { |
| int ret; |
| struct slim_ele_access msg; |
| int slim_read_tries = TABLA_SLIM_RW_MAX_TRIES; |
| msg.start_offset = TABLA_REGISTER_START_OFFSET + reg; |
| msg.num_bytes = bytes; |
| msg.comp = NULL; |
| |
| while (1) { |
| mutex_lock(&tabla->xfer_lock); |
| ret = slim_request_val_element(interface ? |
| tabla->slim_slave : tabla->slim, |
| &msg, dest, bytes); |
| mutex_unlock(&tabla->xfer_lock); |
| if (likely(ret == 0) || (--slim_read_tries == 0)) |
| break; |
| usleep_range(5000, 5000); |
| } |
| |
| if (ret) |
| pr_err("%s: Error, Tabla read failed (%d)\n", __func__, ret); |
| |
| return ret; |
| } |
| /* Interface specifies whether the write is to the interface or general |
| * registers. |
| */ |
| static int tabla_slim_write_device(struct tabla *tabla, unsigned short reg, |
| int bytes, void *src, bool interface) |
| { |
| int ret; |
| struct slim_ele_access msg; |
| int slim_write_tries = TABLA_SLIM_RW_MAX_TRIES; |
| msg.start_offset = TABLA_REGISTER_START_OFFSET + reg; |
| msg.num_bytes = bytes; |
| msg.comp = NULL; |
| |
| while (1) { |
| mutex_lock(&tabla->xfer_lock); |
| ret = slim_change_val_element(interface ? |
| tabla->slim_slave : tabla->slim, |
| &msg, src, bytes); |
| mutex_unlock(&tabla->xfer_lock); |
| if (likely(ret == 0) || (--slim_write_tries == 0)) |
| break; |
| usleep_range(5000, 5000); |
| } |
| |
| if (ret) |
| pr_err("%s: Error, Tabla write failed (%d)\n", __func__, ret); |
| |
| return ret; |
| } |
| |
| static struct mfd_cell tabla_devs[] = { |
| { |
| .name = "tabla_codec", |
| }, |
| }; |
| |
| static void tabla_bring_up(struct tabla *tabla) |
| { |
| tabla_reg_write(tabla, TABLA_A_LEAKAGE_CTL, 0x4); |
| tabla_reg_write(tabla, TABLA_A_CDC_CTL, 0); |
| usleep_range(5000, 5000); |
| tabla_reg_write(tabla, TABLA_A_CDC_CTL, 3); |
| tabla_reg_write(tabla, TABLA_A_LEAKAGE_CTL, 3); |
| } |
| |
| static void tabla_bring_down(struct tabla *tabla) |
| { |
| tabla_reg_write(tabla, TABLA_A_LEAKAGE_CTL, 0x7); |
| tabla_reg_write(tabla, TABLA_A_LEAKAGE_CTL, 0x6); |
| tabla_reg_write(tabla, TABLA_A_LEAKAGE_CTL, 0xe); |
| tabla_reg_write(tabla, TABLA_A_LEAKAGE_CTL, 0x8); |
| } |
| |
| static int tabla_reset(struct tabla *tabla) |
| { |
| int ret; |
| struct pm_gpio param = { |
| .direction = PM_GPIO_DIR_OUT, |
| .output_buffer = PM_GPIO_OUT_BUF_CMOS, |
| .output_value = 1, |
| .pull = PM_GPIO_PULL_NO, |
| .vin_sel = PM_GPIO_VIN_S4, |
| .out_strength = PM_GPIO_STRENGTH_MED, |
| .function = PM_GPIO_FUNC_NORMAL, |
| }; |
| |
| if (tabla->reset_gpio) { |
| ret = gpio_request(tabla->reset_gpio, "CDC_RESET"); |
| if (ret) { |
| pr_err("%s: Failed to request gpio %d\n", __func__, |
| tabla->reset_gpio); |
| tabla->reset_gpio = 0; |
| return ret; |
| } |
| |
| ret = pm8xxx_gpio_config(tabla->reset_gpio, ¶m); |
| if (ret) |
| pr_err("%s: Failed to configure gpio\n", __func__); |
| |
| gpio_direction_output(tabla->reset_gpio, 1); |
| msleep(20); |
| gpio_direction_output(tabla->reset_gpio, 0); |
| msleep(20); |
| gpio_direction_output(tabla->reset_gpio, 1); |
| msleep(20); |
| } |
| return 0; |
| } |
| |
| static void tabla_free_reset(struct tabla *tabla) |
| { |
| if (tabla->reset_gpio) { |
| gpio_free(tabla->reset_gpio); |
| tabla->reset_gpio = 0; |
| } |
| } |
| |
| struct tabla_regulator { |
| const char *name; |
| int min_uV; |
| int max_uV; |
| int optimum_uA; |
| struct regulator *regulator; |
| }; |
| |
| |
| /* |
| * format : TABLA_<POWER_SUPPLY_PIN_NAME>_CUR_MAX |
| * |
| * <POWER_SUPPLY_PIN_NAME> from Tabla objective spec |
| */ |
| |
| #define TABLA_CDC_VDDA_CP_CUR_MAX 500000 |
| #define TABLA_CDC_VDDA_RX_CUR_MAX 20000 |
| #define TABLA_CDC_VDDA_TX_CUR_MAX 20000 |
| #define TABLA_VDDIO_CDC_CUR_MAX 5000 |
| |
| #define TABLA_VDDD_CDC_D_CUR_MAX 5000 |
| #define TABLA_VDDD_CDC_A_CUR_MAX 5000 |
| |
| static struct tabla_regulator tabla_regulators[] = { |
| { |
| .name = "CDC_VDD_CP", |
| .min_uV = 1800000, |
| .max_uV = 1800000, |
| .optimum_uA = TABLA_CDC_VDDA_CP_CUR_MAX, |
| }, |
| { |
| .name = "CDC_VDDA_RX", |
| .min_uV = 1800000, |
| .max_uV = 1800000, |
| .optimum_uA = TABLA_CDC_VDDA_RX_CUR_MAX, |
| }, |
| { |
| .name = "CDC_VDDA_TX", |
| .min_uV = 1800000, |
| .max_uV = 1800000, |
| .optimum_uA = TABLA_CDC_VDDA_TX_CUR_MAX, |
| }, |
| { |
| .name = "VDDIO_CDC", |
| .min_uV = 1800000, |
| .max_uV = 1800000, |
| .optimum_uA = TABLA_VDDIO_CDC_CUR_MAX, |
| }, |
| { |
| .name = "VDDD_CDC_D", |
| .min_uV = 1225000, |
| .max_uV = 1225000, |
| .optimum_uA = TABLA_VDDD_CDC_D_CUR_MAX, |
| }, |
| { |
| .name = "CDC_VDDA_A_1P2V", |
| .min_uV = 1225000, |
| .max_uV = 1225000, |
| .optimum_uA = TABLA_VDDD_CDC_A_CUR_MAX, |
| }, |
| }; |
| |
| static int tabla_device_init(struct tabla *tabla, int irq) |
| { |
| int ret; |
| |
| mutex_init(&tabla->io_lock); |
| mutex_init(&tabla->xfer_lock); |
| |
| mutex_init(&tabla->pm_lock); |
| tabla->wlock_holders = 0; |
| tabla->pm_state = TABLA_PM_SLEEPABLE; |
| init_waitqueue_head(&tabla->pm_wq); |
| wake_lock_init(&tabla->wlock, WAKE_LOCK_IDLE, "wcd9310-irq"); |
| |
| dev_set_drvdata(tabla->dev, tabla); |
| |
| tabla_bring_up(tabla); |
| |
| ret = tabla_irq_init(tabla); |
| if (ret) { |
| pr_err("IRQ initialization failed\n"); |
| goto err; |
| } |
| |
| ret = mfd_add_devices(tabla->dev, -1, |
| tabla_devs, ARRAY_SIZE(tabla_devs), |
| NULL, 0); |
| if (ret != 0) { |
| dev_err(tabla->dev, "Failed to add children: %d\n", ret); |
| goto err_irq; |
| } |
| |
| tabla->version = tabla_reg_read(tabla, TABLA_A_CHIP_VERSION) & 0x1F; |
| pr_info("%s : Tabla version %u initialized\n", |
| __func__, tabla->version); |
| |
| return ret; |
| err_irq: |
| tabla_irq_exit(tabla); |
| err: |
| tabla_bring_down(tabla); |
| wake_lock_destroy(&tabla->wlock); |
| mutex_destroy(&tabla->pm_lock); |
| mutex_destroy(&tabla->io_lock); |
| mutex_destroy(&tabla->xfer_lock); |
| return ret; |
| } |
| |
| static void tabla_device_exit(struct tabla *tabla) |
| { |
| tabla_irq_exit(tabla); |
| tabla_bring_down(tabla); |
| tabla_free_reset(tabla); |
| mutex_destroy(&tabla->pm_lock); |
| wake_lock_destroy(&tabla->wlock); |
| mutex_destroy(&tabla->io_lock); |
| mutex_destroy(&tabla->xfer_lock); |
| } |
| |
| |
| #ifdef CONFIG_DEBUG_FS |
| struct tabla *debugTabla; |
| |
| static struct dentry *debugfs_tabla_dent; |
| static struct dentry *debugfs_peek; |
| static struct dentry *debugfs_poke; |
| |
| static unsigned char read_data; |
| |
| static int codec_debug_open(struct inode *inode, struct file *file) |
| { |
| file->private_data = inode->i_private; |
| return 0; |
| } |
| |
| static int get_parameters(char *buf, long int *param1, int num_of_par) |
| { |
| char *token; |
| int base, cnt; |
| |
| token = strsep(&buf, " "); |
| |
| for (cnt = 0; cnt < num_of_par; cnt++) { |
| if (token != NULL) { |
| if ((token[1] == 'x') || (token[1] == 'X')) |
| base = 16; |
| else |
| base = 10; |
| |
| if (strict_strtoul(token, base, ¶m1[cnt]) != 0) |
| return -EINVAL; |
| |
| token = strsep(&buf, " "); |
| } else |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static ssize_t codec_debug_read(struct file *file, char __user *ubuf, |
| size_t count, loff_t *ppos) |
| { |
| char lbuf[8]; |
| |
| snprintf(lbuf, sizeof(lbuf), "0x%x\n", read_data); |
| return simple_read_from_buffer(ubuf, count, ppos, lbuf, |
| strnlen(lbuf, 7)); |
| } |
| |
| |
| static ssize_t codec_debug_write(struct file *filp, |
| const char __user *ubuf, size_t cnt, loff_t *ppos) |
| { |
| char *access_str = filp->private_data; |
| char lbuf[32]; |
| int rc; |
| long int param[5]; |
| |
| if (cnt > sizeof(lbuf) - 1) |
| return -EINVAL; |
| |
| rc = copy_from_user(lbuf, ubuf, cnt); |
| if (rc) |
| return -EFAULT; |
| |
| lbuf[cnt] = '\0'; |
| |
| if (!strncmp(access_str, "poke", 6)) { |
| /* write */ |
| rc = get_parameters(lbuf, param, 2); |
| if ((param[0] <= 0x3FF) && (param[1] <= 0xFF) && |
| (rc == 0)) |
| tabla_interface_reg_write(debugTabla, param[0], |
| param[1]); |
| else |
| rc = -EINVAL; |
| } else if (!strncmp(access_str, "peek", 6)) { |
| /* read */ |
| rc = get_parameters(lbuf, param, 1); |
| if ((param[0] <= 0x3FF) && (rc == 0)) |
| read_data = tabla_interface_reg_read(debugTabla, |
| param[0]); |
| else |
| rc = -EINVAL; |
| } |
| |
| if (rc == 0) |
| rc = cnt; |
| else |
| pr_err("%s: rc = %d\n", __func__, rc); |
| |
| return rc; |
| } |
| |
| static const struct file_operations codec_debug_ops = { |
| .open = codec_debug_open, |
| .write = codec_debug_write, |
| .read = codec_debug_read |
| }; |
| #endif |
| |
| static int tabla_enable_supplies(struct tabla *tabla) |
| { |
| int ret; |
| int i; |
| |
| tabla->supplies = kzalloc(sizeof(struct regulator_bulk_data) * |
| ARRAY_SIZE(tabla_regulators), |
| GFP_KERNEL); |
| if (!tabla->supplies) { |
| ret = -ENOMEM; |
| goto err; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(tabla_regulators); i++) |
| tabla->supplies[i].supply = tabla_regulators[i].name; |
| |
| ret = regulator_bulk_get(tabla->dev, ARRAY_SIZE(tabla_regulators), |
| tabla->supplies); |
| if (ret != 0) { |
| dev_err(tabla->dev, "Failed to get supplies: err = %d\n", ret); |
| goto err_supplies; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(tabla_regulators); i++) { |
| ret = regulator_set_voltage(tabla->supplies[i].consumer, |
| tabla_regulators[i].min_uV, tabla_regulators[i].max_uV); |
| if (ret) { |
| pr_err("%s: Setting regulator voltage failed for " |
| "regulator %s err = %d\n", __func__, |
| tabla->supplies[i].supply, ret); |
| goto err_get; |
| } |
| |
| ret = regulator_set_optimum_mode(tabla->supplies[i].consumer, |
| tabla_regulators[i].optimum_uA); |
| if (ret < 0) { |
| pr_err("%s: Setting regulator optimum mode failed for " |
| "regulator %s err = %d\n", __func__, |
| tabla->supplies[i].supply, ret); |
| goto err_get; |
| } |
| } |
| |
| ret = regulator_bulk_enable(ARRAY_SIZE(tabla_regulators), |
| tabla->supplies); |
| if (ret != 0) { |
| dev_err(tabla->dev, "Failed to enable supplies: err = %d\n", |
| ret); |
| goto err_configure; |
| } |
| return ret; |
| |
| err_configure: |
| for (i = 0; i < ARRAY_SIZE(tabla_regulators); i++) { |
| regulator_set_voltage(tabla->supplies[i].consumer, 0, |
| tabla_regulators[i].max_uV); |
| regulator_set_optimum_mode(tabla->supplies[i].consumer, 0); |
| } |
| err_get: |
| regulator_bulk_free(ARRAY_SIZE(tabla_regulators), tabla->supplies); |
| err_supplies: |
| kfree(tabla->supplies); |
| err: |
| return ret; |
| } |
| |
| static void tabla_disable_supplies(struct tabla *tabla) |
| { |
| int i; |
| |
| regulator_bulk_disable(ARRAY_SIZE(tabla_regulators), |
| tabla->supplies); |
| for (i = 0; i < ARRAY_SIZE(tabla_regulators); i++) { |
| regulator_set_voltage(tabla->supplies[i].consumer, 0, |
| tabla_regulators[i].max_uV); |
| regulator_set_optimum_mode(tabla->supplies[i].consumer, 0); |
| } |
| regulator_bulk_free(ARRAY_SIZE(tabla_regulators), tabla->supplies); |
| kfree(tabla->supplies); |
| } |
| |
| int tabla_get_intf_type(void) |
| { |
| return tabla_intf; |
| } |
| EXPORT_SYMBOL_GPL(tabla_get_intf_type); |
| |
| struct tabla_i2c *get_i2c_tabla_device_info(u16 reg) |
| { |
| u16 mask = 0x0f00; |
| int value = 0; |
| struct tabla_i2c *tabla = NULL; |
| value = ((reg & mask) >> 8) & 0x000f; |
| switch (value) { |
| case 0: |
| tabla = &tabla_modules[0]; |
| break; |
| case 1: |
| tabla = &tabla_modules[1]; |
| break; |
| case 2: |
| tabla = &tabla_modules[2]; |
| break; |
| case 3: |
| tabla = &tabla_modules[3]; |
| break; |
| default: |
| break; |
| } |
| return tabla; |
| } |
| |
| int tabla_i2c_write_device(u16 reg, u8 *value, |
| u32 bytes) |
| { |
| |
| struct i2c_msg *msg; |
| int ret = 0; |
| u8 reg_addr = 0; |
| u8 data[bytes + 1]; |
| struct tabla_i2c *tabla; |
| |
| tabla = get_i2c_tabla_device_info(reg); |
| if (tabla->client == NULL) { |
| pr_err("failed to get device info\n"); |
| return -ENODEV; |
| } |
| reg_addr = (u8)reg; |
| msg = &tabla->xfer_msg[0]; |
| msg->addr = tabla->client->addr; |
| msg->len = bytes + 1; |
| msg->flags = 0; |
| data[0] = reg; |
| data[1] = *value; |
| msg->buf = data; |
| ret = i2c_transfer(tabla->client->adapter, tabla->xfer_msg, 1); |
| /* Try again if the write fails */ |
| if (ret != 1) { |
| ret = i2c_transfer(tabla->client->adapter, |
| tabla->xfer_msg, 1); |
| if (ret != 1) { |
| pr_err("failed to write the device\n"); |
| return ret; |
| } |
| } |
| pr_debug("write sucess register = %x val = %x\n", reg, data[1]); |
| return 0; |
| } |
| |
| |
| int tabla_i2c_read_device(unsigned short reg, |
| int bytes, unsigned char *dest) |
| { |
| struct i2c_msg *msg; |
| int ret = 0; |
| u8 reg_addr = 0; |
| struct tabla_i2c *tabla; |
| u8 i = 0; |
| |
| tabla = get_i2c_tabla_device_info(reg); |
| if (tabla->client == NULL) { |
| pr_err("failed to get device info\n"); |
| return -ENODEV; |
| } |
| for (i = 0; i < bytes; i++) { |
| reg_addr = (u8)reg++; |
| msg = &tabla->xfer_msg[0]; |
| msg->addr = tabla->client->addr; |
| msg->len = 1; |
| msg->flags = 0; |
| msg->buf = ®_addr; |
| |
| msg = &tabla->xfer_msg[1]; |
| msg->addr = tabla->client->addr; |
| msg->len = 1; |
| msg->flags = I2C_M_RD; |
| msg->buf = dest++; |
| ret = i2c_transfer(tabla->client->adapter, tabla->xfer_msg, 2); |
| |
| /* Try again if read fails first time */ |
| if (ret != 2) { |
| ret = i2c_transfer(tabla->client->adapter, |
| tabla->xfer_msg, 2); |
| if (ret != 2) { |
| pr_err("failed to read tabla register\n"); |
| return ret; |
| } |
| } |
| } |
| return 0; |
| } |
| |
| int tabla_i2c_read(struct tabla *tabla, unsigned short reg, |
| int bytes, void *dest, bool interface_reg) |
| { |
| return tabla_i2c_read_device(reg, bytes, dest); |
| } |
| |
| int tabla_i2c_write(struct tabla *tabla, unsigned short reg, |
| int bytes, void *src, bool interface_reg) |
| { |
| return tabla_i2c_write_device(reg, src, bytes); |
| } |
| |
| static int __devinit tabla_i2c_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct tabla *tabla; |
| struct tabla_pdata *pdata = client->dev.platform_data; |
| int val = 0; |
| int ret = 0; |
| static int device_id; |
| |
| if (device_id > 0) { |
| tabla_modules[device_id++].client = client; |
| pr_info("probe for other slaves devices of tabla\n"); |
| return ret; |
| } |
| |
| tabla = kzalloc(sizeof(struct tabla), GFP_KERNEL); |
| if (tabla == NULL) { |
| pr_err("%s: error, allocation failed\n", __func__); |
| ret = -ENOMEM; |
| goto fail; |
| } |
| |
| if (!pdata) { |
| dev_dbg(&client->dev, "no platform data?\n"); |
| ret = -EINVAL; |
| goto fail; |
| } |
| if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) == 0) { |
| dev_dbg(&client->dev, "can't talk I2C?\n"); |
| ret = -EIO; |
| goto fail; |
| } |
| tabla->dev = &client->dev; |
| tabla->reset_gpio = pdata->reset_gpio; |
| |
| ret = tabla_enable_supplies(tabla); |
| if (ret) { |
| pr_err("%s: Fail to enable Tabla supplies\n", __func__); |
| goto err_tabla; |
| } |
| |
| usleep_range(5, 5); |
| ret = tabla_reset(tabla); |
| if (ret) { |
| pr_err("%s: Resetting Tabla failed\n", __func__); |
| goto err_supplies; |
| } |
| tabla_modules[device_id++].client = client; |
| |
| tabla->read_dev = tabla_i2c_read; |
| tabla->write_dev = tabla_i2c_write; |
| tabla->irq = pdata->irq; |
| tabla->irq_base = pdata->irq_base; |
| |
| /*read the tabla status before initializing the device type*/ |
| ret = tabla_read(tabla, TABLA_A_CHIP_STATUS, 1, &val, 0); |
| if ((ret < 0) || (val != TABLA_I2C_MODE)) { |
| pr_err("failed to read the tabla status\n"); |
| goto err_device_init; |
| } |
| |
| ret = tabla_device_init(tabla, tabla->irq); |
| if (ret) { |
| pr_err("%s: error, initializing device failed\n", __func__); |
| goto err_device_init; |
| } |
| tabla_intf = TABLA_INTERFACE_TYPE_I2C; |
| |
| return ret; |
| err_device_init: |
| tabla_free_reset(tabla); |
| err_supplies: |
| tabla_disable_supplies(tabla); |
| err_tabla: |
| kfree(tabla); |
| fail: |
| return ret; |
| } |
| |
| static int __devexit tabla_i2c_remove(struct i2c_client *client) |
| { |
| struct tabla *tabla; |
| |
| pr_debug("exit\n"); |
| tabla = dev_get_drvdata(&client->dev); |
| tabla_device_exit(tabla); |
| tabla_disable_supplies(tabla); |
| kfree(tabla); |
| return 0; |
| } |
| |
| static int tabla_slim_probe(struct slim_device *slim) |
| { |
| struct tabla *tabla; |
| struct tabla_pdata *pdata; |
| int ret = 0; |
| int sgla_retry_cnt; |
| |
| dev_info(&slim->dev, "Initialized slim device %s\n", slim->name); |
| pdata = slim->dev.platform_data; |
| |
| if (!pdata) { |
| dev_err(&slim->dev, "Error, no platform data\n"); |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| tabla = kzalloc(sizeof(struct tabla), GFP_KERNEL); |
| if (tabla == NULL) { |
| pr_err("%s: error, allocation failed\n", __func__); |
| ret = -ENOMEM; |
| goto err; |
| } |
| if (!slim->ctrl) { |
| pr_err("Error, no SLIMBUS control data\n"); |
| ret = -EINVAL; |
| goto err_tabla; |
| } |
| tabla->slim = slim; |
| slim_set_clientdata(slim, tabla); |
| tabla->reset_gpio = pdata->reset_gpio; |
| tabla->dev = &slim->dev; |
| |
| ret = tabla_enable_supplies(tabla); |
| if (ret) { |
| pr_err("%s: Fail to enable Tabla supplies\n", __func__); |
| goto err_tabla; |
| } |
| usleep_range(5, 5); |
| |
| ret = tabla_reset(tabla); |
| if (ret) { |
| pr_err("%s: Resetting Tabla failed\n", __func__); |
| goto err_supplies; |
| } |
| |
| ret = slim_get_logical_addr(tabla->slim, tabla->slim->e_addr, |
| ARRAY_SIZE(tabla->slim->e_addr), &tabla->slim->laddr); |
| if (ret) { |
| pr_err("fail to get slimbus logical address %d\n", ret); |
| goto err_reset; |
| } |
| tabla->read_dev = tabla_slim_read_device; |
| tabla->write_dev = tabla_slim_write_device; |
| tabla->irq = pdata->irq; |
| tabla->irq_base = pdata->irq_base; |
| tabla_pgd_la = tabla->slim->laddr; |
| |
| if (pdata->num_irqs < TABLA_NUM_IRQS) { |
| pr_err("%s: Error, not enough interrupt lines allocated\n", |
| __func__); |
| goto err_reset; |
| } |
| |
| tabla->slim_slave = &pdata->slimbus_slave_device; |
| |
| ret = slim_add_device(slim->ctrl, tabla->slim_slave); |
| if (ret) { |
| pr_err("%s: error, adding SLIMBUS device failed\n", __func__); |
| goto err_reset; |
| } |
| |
| sgla_retry_cnt = 0; |
| |
| while (1) { |
| ret = slim_get_logical_addr(tabla->slim_slave, |
| tabla->slim_slave->e_addr, |
| ARRAY_SIZE(tabla->slim_slave->e_addr), |
| &tabla->slim_slave->laddr); |
| if (ret) { |
| if (sgla_retry_cnt++ < TABLA_SLIM_GLA_MAX_RETRIES) { |
| /* Give SLIMBUS slave time to report present |
| and be ready. |
| */ |
| usleep_range(1000, 1000); |
| pr_debug("%s: retry slim_get_logical_addr()\n", |
| __func__); |
| continue; |
| } |
| pr_err("fail to get slimbus slave logical address" |
| " %d\n", ret); |
| goto err_slim_add; |
| } |
| break; |
| } |
| tabla_inf_la = tabla->slim_slave->laddr; |
| tabla_intf = TABLA_INTERFACE_TYPE_SLIMBUS; |
| |
| ret = tabla_device_init(tabla, tabla->irq); |
| if (ret) { |
| pr_err("%s: error, initializing device failed\n", __func__); |
| goto err_slim_add; |
| } |
| tabla_init_slimslave(tabla, tabla_pgd_la); |
| #ifdef CONFIG_DEBUG_FS |
| debugTabla = tabla; |
| |
| debugfs_tabla_dent = debugfs_create_dir |
| ("wcd9310_slimbus_interface_device", 0); |
| if (!IS_ERR(debugfs_tabla_dent)) { |
| debugfs_peek = debugfs_create_file("peek", |
| S_IFREG | S_IRUGO, debugfs_tabla_dent, |
| (void *) "peek", &codec_debug_ops); |
| |
| debugfs_poke = debugfs_create_file("poke", |
| S_IFREG | S_IRUGO, debugfs_tabla_dent, |
| (void *) "poke", &codec_debug_ops); |
| } |
| #endif |
| |
| return ret; |
| |
| err_slim_add: |
| slim_remove_device(tabla->slim_slave); |
| err_reset: |
| tabla_free_reset(tabla); |
| err_supplies: |
| tabla_disable_supplies(tabla); |
| err_tabla: |
| kfree(tabla); |
| err: |
| return ret; |
| } |
| |
| static int tabla_slim_remove(struct slim_device *pdev) |
| { |
| struct tabla *tabla; |
| |
| #ifdef CONFIG_DEBUG_FS |
| debugfs_remove(debugfs_peek); |
| debugfs_remove(debugfs_poke); |
| debugfs_remove(debugfs_tabla_dent); |
| #endif |
| |
| tabla = slim_get_devicedata(pdev); |
| tabla_deinit_slimslave(tabla); |
| tabla_device_exit(tabla); |
| tabla_disable_supplies(tabla); |
| slim_remove_device(tabla->slim_slave); |
| kfree(tabla); |
| |
| return 0; |
| } |
| |
| static int tabla_resume(struct tabla *tabla) |
| { |
| int ret = 0; |
| |
| pr_debug("%s: enter\n", __func__); |
| mutex_lock(&tabla->pm_lock); |
| if (tabla->pm_state == TABLA_PM_ASLEEP) { |
| pr_debug("%s: resuming system, state %d, wlock %d\n", __func__, |
| tabla->pm_state, tabla->wlock_holders); |
| tabla->pm_state = TABLA_PM_SLEEPABLE; |
| } else { |
| pr_warn("%s: system is already awake, state %d wlock %d\n", |
| __func__, tabla->pm_state, tabla->wlock_holders); |
| } |
| mutex_unlock(&tabla->pm_lock); |
| wake_up_all(&tabla->pm_wq); |
| |
| return ret; |
| } |
| |
| static int tabla_slim_resume(struct slim_device *sldev) |
| { |
| struct tabla *tabla = slim_get_devicedata(sldev); |
| return tabla_resume(tabla); |
| } |
| |
| static int tabla_i2c_resume(struct i2c_client *i2cdev) |
| { |
| struct tabla *tabla = dev_get_drvdata(&i2cdev->dev); |
| return tabla_resume(tabla); |
| } |
| |
| static int tabla_suspend(struct tabla *tabla, pm_message_t pmesg) |
| { |
| int ret = 0; |
| |
| pr_debug("%s: enter\n", __func__); |
| /* wake_lock() can be called after this suspend chain call started. |
| * thus suspend can be called while wlock is being held */ |
| mutex_lock(&tabla->pm_lock); |
| if (tabla->pm_state == TABLA_PM_SLEEPABLE) { |
| pr_debug("%s: suspending system, state %d, wlock %d\n", |
| __func__, tabla->pm_state, tabla->wlock_holders); |
| tabla->pm_state = TABLA_PM_ASLEEP; |
| } else if (tabla->pm_state == TABLA_PM_AWAKE) { |
| /* unlock to wait for pm_state == TABLA_PM_SLEEPABLE |
| * then set to TABLA_PM_ASLEEP */ |
| pr_debug("%s: waiting to suspend system, state %d, wlock %d\n", |
| __func__, tabla->pm_state, tabla->wlock_holders); |
| mutex_unlock(&tabla->pm_lock); |
| if (!(wait_event_timeout(tabla->pm_wq, |
| tabla_pm_cmpxchg(tabla, |
| TABLA_PM_SLEEPABLE, |
| TABLA_PM_ASLEEP) == |
| TABLA_PM_SLEEPABLE, |
| HZ))) { |
| pr_debug("%s: suspend failed state %d, wlock %d\n", |
| __func__, tabla->pm_state, |
| tabla->wlock_holders); |
| ret = -EBUSY; |
| } else { |
| pr_debug("%s: done, state %d, wlock %d\n", __func__, |
| tabla->pm_state, tabla->wlock_holders); |
| } |
| mutex_lock(&tabla->pm_lock); |
| } else if (tabla->pm_state == TABLA_PM_ASLEEP) { |
| pr_warn("%s: system is already suspended, state %d, wlock %dn", |
| __func__, tabla->pm_state, tabla->wlock_holders); |
| } |
| mutex_unlock(&tabla->pm_lock); |
| |
| return ret; |
| } |
| |
| static int tabla_slim_suspend(struct slim_device *sldev, pm_message_t pmesg) |
| { |
| struct tabla *tabla = slim_get_devicedata(sldev); |
| return tabla_suspend(tabla, pmesg); |
| } |
| |
| static int tabla_i2c_suspend(struct i2c_client *i2cdev, pm_message_t pmesg) |
| { |
| struct tabla *tabla = dev_get_drvdata(&i2cdev->dev); |
| return tabla_suspend(tabla, pmesg); |
| } |
| |
| static const struct slim_device_id slimtest_id[] = { |
| {"tabla-slim", 0}, |
| {} |
| }; |
| |
| static struct slim_driver tabla_slim_driver = { |
| .driver = { |
| .name = "tabla-slim", |
| .owner = THIS_MODULE, |
| }, |
| .probe = tabla_slim_probe, |
| .remove = tabla_slim_remove, |
| .id_table = slimtest_id, |
| .resume = tabla_slim_resume, |
| .suspend = tabla_slim_suspend, |
| }; |
| |
| static const struct slim_device_id slimtest2x_id[] = { |
| {"tabla2x-slim", 0}, |
| {} |
| }; |
| |
| static struct slim_driver tabla2x_slim_driver = { |
| .driver = { |
| .name = "tabla2x-slim", |
| .owner = THIS_MODULE, |
| }, |
| .probe = tabla_slim_probe, |
| .remove = tabla_slim_remove, |
| .id_table = slimtest2x_id, |
| .resume = tabla_slim_resume, |
| .suspend = tabla_slim_suspend, |
| }; |
| |
| #define TABLA_I2C_TOP_LEVEL 0 |
| #define TABLA_I2C_ANALOG 1 |
| #define TABLA_I2C_DIGITAL_1 2 |
| #define TABLA_I2C_DIGITAL_2 3 |
| |
| static struct i2c_device_id tabla_id_table[] = { |
| {"tabla top level", TABLA_I2C_TOP_LEVEL}, |
| {"tabla analog", TABLA_I2C_TOP_LEVEL}, |
| {"tabla digital1", TABLA_I2C_TOP_LEVEL}, |
| {"tabla digital2", TABLA_I2C_TOP_LEVEL}, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(i2c, tabla_id_table); |
| |
| static struct i2c_driver tabla_i2c_driver = { |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = "tabla-i2c-core", |
| }, |
| .id_table = tabla_id_table, |
| .probe = tabla_i2c_probe, |
| .remove = __devexit_p(tabla_i2c_remove), |
| .resume = tabla_i2c_resume, |
| .suspend = tabla_i2c_suspend, |
| }; |
| |
| static int __init tabla_init(void) |
| { |
| int ret1, ret2, ret3; |
| |
| ret1 = slim_driver_register(&tabla_slim_driver); |
| if (ret1 != 0) |
| pr_err("Failed to register tabla SB driver: %d\n", ret1); |
| |
| ret2 = slim_driver_register(&tabla2x_slim_driver); |
| if (ret2 != 0) |
| pr_err("Failed to register tabla2x SB driver: %d\n", ret2); |
| |
| ret3 = i2c_add_driver(&tabla_i2c_driver); |
| if (ret3 != 0) |
| pr_err("failed to add the I2C driver\n"); |
| |
| return (ret1 && ret2 && ret3) ? -1 : 0; |
| } |
| module_init(tabla_init); |
| |
| static void __exit tabla_exit(void) |
| { |
| } |
| module_exit(tabla_exit); |
| |
| MODULE_DESCRIPTION("Tabla core driver"); |
| MODULE_VERSION("1.0"); |
| MODULE_LICENSE("GPL v2"); |