arch/xtensa/lib/memcopy.S - kernel/msm - Gitiles

 /*
  * arch/xtensa/lib/hal/memcopy.S -- Core HAL library functions
  * xthal_memcpy and xthal_bcopy
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
  * Copyright (C) 2002 - 2005 Tensilica Inc.
  */

 #include <xtensa/coreasm.h>

 	.macro	src_b	r, w0, w1
 #ifdef __XTENSA_EB__
 	src	\r, \w0, \w1
 #else
 	src	\r, \w1, \w0
 #endif
 	.endm

 	.macro	ssa8	r
 #ifdef __XTENSA_EB__
 	ssa8b	\r
 #else
 	ssa8l	\r
 #endif
 	.endm


 /*
  * void *memcpy(void *dst, const void *src, size_t len);
  * void *memmove(void *dst, const void *src, size_t len);
  * void *bcopy(const void *src, void *dst, size_t len);
  *
  * This function is intended to do the same thing as the standard
  * library function memcpy() (or bcopy()) for most cases.
  * However, where the source and/or destination references
  * an instruction RAM or ROM or a data RAM or ROM, that
  * source and/or destination will always be accessed with
  * 32-bit load and store instructions (as required for these
  * types of devices).
  *
  * !!!!!!!  XTFIXME:
  * !!!!!!!  Handling of IRAM/IROM has not yet
  * !!!!!!!  been implemented.
  *
  * The bcopy version is provided here to avoid the overhead
  * of an extra call, for callers that require this convention.
  *
  * The (general case) algorithm is as follows:
  *   If destination is unaligned, align it by conditionally
  *     copying 1 and 2 bytes.
  *   If source is aligned,
  *     do 16 bytes with a loop, and then finish up with
  *     8, 4, 2, and 1 byte copies conditional on the length;
  *   else (if source is unaligned),
  *     do the same, but use SRC to align the source data.
  *   This code tries to use fall-through branches for the common
  *     case of aligned source and destination and multiple
  *     of 4 (or 8) length.
  *
  * Register use:
  *	a0/ return address
  *	a1/ stack pointer
  *	a2/ return value
  *	a3/ src
  *	a4/ length
  *	a5/ dst
  *	a6/ tmp
  *	a7/ tmp
  *	a8/ tmp
  *	a9/ tmp
  *	a10/ tmp
  *	a11/ tmp
  */

 	.text
 	.align	4
 	.global	bcopy
 	.type   bcopy,@function
 bcopy:
 	entry	sp, 16		# minimal stack frame
 	# a2=src, a3=dst, a4=len
 	mov	a5, a3		# copy dst so that a2 is return value
 	mov	a3, a2
 	mov	a2, a5
 	j	.Lcommon	# go to common code for memcpy+bcopy


 /*
  * Byte by byte copy
  */
 	.align	4
 	.byte	0		# 1 mod 4 alignment for LOOPNEZ
 				# (0 mod 4 alignment for LBEG)
 .Lbytecopy:
 #if XCHAL_HAVE_LOOPS
 	loopnez	a4, .Lbytecopydone
 #else /* !XCHAL_HAVE_LOOPS */
 	beqz	a4, .Lbytecopydone
 	add	a7, a3, a4	# a7 = end address for source
 #endif /* !XCHAL_HAVE_LOOPS */
 .Lnextbyte:
 	l8ui	a6, a3, 0
 	addi	a3, a3, 1
 	s8i	a6, a5, 0
 	addi	a5, a5, 1
 #if !XCHAL_HAVE_LOOPS
 	blt	a3, a7, .Lnextbyte
 #endif /* !XCHAL_HAVE_LOOPS */
 .Lbytecopydone:
 	retw

 /*
  * Destination is unaligned
  */

 	.align	4
 .Ldst1mod2:	# dst is only byte aligned
 	_bltui	a4, 7, .Lbytecopy	# do short copies byte by byte

 	# copy 1 byte
 	l8ui	a6, a3,  0
 	addi	a3, a3,  1
 	addi	a4, a4, -1
 	s8i	a6, a5,  0
 	addi	a5, a5,  1
 	_bbci.l	a5, 1, .Ldstaligned	# if dst is now aligned, then
 					# return to main algorithm
 .Ldst2mod4:	# dst 16-bit aligned
 	# copy 2 bytes
 	_bltui	a4, 6, .Lbytecopy	# do short copies byte by byte
 	l8ui	a6, a3,  0
 	l8ui	a7, a3,  1
 	addi	a3, a3,  2
 	addi	a4, a4, -2
 	s8i	a6, a5,  0
 	s8i	a7, a5,  1
 	addi	a5, a5,  2
 	j	.Ldstaligned	# dst is now aligned, return to main algorithm

 	.align	4
 	.global	memcpy
 	.type   memcpy,@function
 memcpy:
 	.global	memmove
 	.type   memmove,@function
 memmove:

 	entry	sp, 16		# minimal stack frame
 	# a2/ dst, a3/ src, a4/ len
 	mov	a5, a2		# copy dst so that a2 is return value
 .Lcommon:
 	_bbsi.l	a2, 0, .Ldst1mod2	# if dst is 1 mod 2
 	_bbsi.l	a2, 1, .Ldst2mod4	# if dst is 2 mod 4
 .Ldstaligned:	# return here from .Ldst?mod? once dst is aligned
 	srli	a7, a4, 4	# number of loop iterations with 16B
 				# per iteration
 	movi	a8, 3		# if source is not aligned,
 	_bany	a3, a8, .Lsrcunaligned	# then use shifting copy
 	/*
 	 * Destination and source are word-aligned, use word copy.
 	 */
 	# copy 16 bytes per iteration for word-aligned dst and word-aligned src
 #if XCHAL_HAVE_LOOPS
 	loopnez	a7, .Loop1done
 #else /* !XCHAL_HAVE_LOOPS */
 	beqz	a7, .Loop1done
 	slli	a8, a7, 4
 	add	a8, a8, a3	# a8 = end of last 16B source chunk
 #endif /* !XCHAL_HAVE_LOOPS */
 .Loop1:
 	l32i	a6, a3,  0
 	l32i	a7, a3,  4
 	s32i	a6, a5,  0
 	l32i	a6, a3,  8
 	s32i	a7, a5,  4
 	l32i	a7, a3, 12
 	s32i	a6, a5,  8
 	addi	a3, a3, 16
 	s32i	a7, a5, 12
 	addi	a5, a5, 16
 #if !XCHAL_HAVE_LOOPS
 	blt	a3, a8, .Loop1
 #endif /* !XCHAL_HAVE_LOOPS */
 .Loop1done:
 	bbci.l	a4, 3, .L2
 	# copy 8 bytes
 	l32i	a6, a3,  0
 	l32i	a7, a3,  4
 	addi	a3, a3,  8
 	s32i	a6, a5,  0
 	s32i	a7, a5,  4
 	addi	a5, a5,  8
 .L2:
 	bbsi.l	a4, 2, .L3
 	bbsi.l	a4, 1, .L4
 	bbsi.l	a4, 0, .L5
 	retw
 .L3:
 	# copy 4 bytes
 	l32i	a6, a3,  0
 	addi	a3, a3,  4
 	s32i	a6, a5,  0
 	addi	a5, a5,  4
 	bbsi.l	a4, 1, .L4
 	bbsi.l	a4, 0, .L5
 	retw
 .L4:
 	# copy 2 bytes
 	l16ui	a6, a3,  0
 	addi	a3, a3,  2
 	s16i	a6, a5,  0
 	addi	a5, a5,  2
 	bbsi.l	a4, 0, .L5
 	retw
 .L5:
 	# copy 1 byte
 	l8ui	a6, a3,  0
 	s8i	a6, a5,  0
 	retw

 /*
  * Destination is aligned, Source is unaligned
  */

 	.align	4
 .Lsrcunaligned:
 	_beqz	a4, .Ldone	# avoid loading anything for zero-length copies
 	# copy 16 bytes per iteration for word-aligned dst and unaligned src
 	ssa8	a3		# set shift amount from byte offset
 #define SIM_CHECKS_ALIGNMENT	1	/* set to 1 when running on ISS (simulator) with the
 					   lint or ferret client, or 0 to save a few cycles */
 #if XCHAL_UNALIGNED_LOAD_EXCEPTION || SIM_CHECKS_ALIGNMENT
 	and	a11, a3, a8	# save unalignment offset for below
 	sub	a3, a3, a11	# align a3
 #endif
 	l32i	a6, a3, 0	# load first word
 #if XCHAL_HAVE_LOOPS
 	loopnez	a7, .Loop2done
 #else /* !XCHAL_HAVE_LOOPS */
 	beqz	a7, .Loop2done
 	slli	a10, a7, 4
 	add	a10, a10, a3	# a10 = end of last 16B source chunk
 #endif /* !XCHAL_HAVE_LOOPS */
 .Loop2:
 	l32i	a7, a3,  4
 	l32i	a8, a3,  8
 	src_b	a6, a6, a7
 	s32i	a6, a5,  0
 	l32i	a9, a3, 12
 	src_b	a7, a7, a8
 	s32i	a7, a5,  4
 	l32i	a6, a3, 16
 	src_b	a8, a8, a9
 	s32i	a8, a5,  8
 	addi	a3, a3, 16
 	src_b	a9, a9, a6
 	s32i	a9, a5, 12
 	addi	a5, a5, 16
 #if !XCHAL_HAVE_LOOPS
 	blt	a3, a10, .Loop2
 #endif /* !XCHAL_HAVE_LOOPS */
 .Loop2done:
 	bbci.l	a4, 3, .L12
 	# copy 8 bytes
 	l32i	a7, a3,  4
 	l32i	a8, a3,  8
 	src_b	a6, a6, a7
 	s32i	a6, a5,  0
 	addi	a3, a3,  8
 	src_b	a7, a7, a8
 	s32i	a7, a5,  4
 	addi	a5, a5,  8
 	mov	a6, a8
 .L12:
 	bbci.l	a4, 2, .L13
 	# copy 4 bytes
 	l32i	a7, a3,  4
 	addi	a3, a3,  4
 	src_b	a6, a6, a7
 	s32i	a6, a5,  0
 	addi	a5, a5,  4
 	mov	a6, a7
 .L13:
 #if XCHAL_UNALIGNED_LOAD_EXCEPTION || SIM_CHECKS_ALIGNMENT
 	add	a3, a3, a11	# readjust a3 with correct misalignment
 #endif
 	bbsi.l	a4, 1, .L14
 	bbsi.l	a4, 0, .L15
 .Ldone:	retw
 .L14:
 	# copy 2 bytes
 	l8ui	a6, a3,  0
 	l8ui	a7, a3,  1
 	addi	a3, a3,  2
 	s8i	a6, a5,  0
 	s8i	a7, a5,  1
 	addi	a5, a5,  2
 	bbsi.l	a4, 0, .L15
 	retw
 .L15:
 	# copy 1 byte
 	l8ui	a6, a3,  0
 	s8i	a6, a5,  0
 	retw

 /*
  * Local Variables:
  * mode:fundamental
  * comment-start: "# "
  * comment-start-skip: "# *"
  * End:
  */
	/*
	* arch/xtensa/lib/hal/memcopy.S -- Core HAL library functions
	* xthal_memcpy and xthal_bcopy
	*
	* This file is subject to the terms and conditions of the GNU General Public
	* License. See the file "COPYING" in the main directory of this archive
	* for more details.
	*
	* Copyright (C) 2002 - 2005 Tensilica Inc.
	*/

	#include <xtensa/coreasm.h>

	.macro src_b r, w0, w1
	#ifdef __XTENSA_EB__
	src \r, \w0, \w1
	#else
	src \r, \w1, \w0
	#endif
	.endm

	.macro ssa8 r
	#ifdef __XTENSA_EB__
	ssa8b \r
	#else
	ssa8l \r
	#endif
	.endm


	/*
	* void memcpy(void dst, const void *src, size_t len);
	* void memmove(void dst, const void *src, size_t len);
	* void bcopy(const void src, void *dst, size_t len);
	*
	* This function is intended to do the same thing as the standard
	* library function memcpy() (or bcopy()) for most cases.
	* However, where the source and/or destination references
	* an instruction RAM or ROM or a data RAM or ROM, that
	* source and/or destination will always be accessed with
	* 32-bit load and store instructions (as required for these
	* types of devices).
	*
	* !!!!!!! XTFIXME:
	* !!!!!!! Handling of IRAM/IROM has not yet
	* !!!!!!! been implemented.
	*
	* The bcopy version is provided here to avoid the overhead
	* of an extra call, for callers that require this convention.
	*
	* The (general case) algorithm is as follows:
	* If destination is unaligned, align it by conditionally
	* copying 1 and 2 bytes.
	* If source is aligned,
	* do 16 bytes with a loop, and then finish up with
	* 8, 4, 2, and 1 byte copies conditional on the length;
	* else (if source is unaligned),
	* do the same, but use SRC to align the source data.
	* This code tries to use fall-through branches for the common
	* case of aligned source and destination and multiple
	* of 4 (or 8) length.
	*
	* Register use:
	* a0/ return address
	* a1/ stack pointer
	* a2/ return value
	* a3/ src
	* a4/ length
	* a5/ dst
	* a6/ tmp
	* a7/ tmp
	* a8/ tmp
	* a9/ tmp
	* a10/ tmp
	* a11/ tmp
	*/

	.text
	.align 4
	.global bcopy
	.type bcopy,@function
	bcopy:
	entry sp, 16 # minimal stack frame
	# a2=src, a3=dst, a4=len
	mov a5, a3 # copy dst so that a2 is return value
	mov a3, a2
	mov a2, a5
	j .Lcommon # go to common code for memcpy+bcopy


	/*
	* Byte by byte copy
	*/
	.align 4
	.byte 0 # 1 mod 4 alignment for LOOPNEZ
	# (0 mod 4 alignment for LBEG)
	.Lbytecopy:
	#if XCHAL_HAVE_LOOPS
	loopnez a4, .Lbytecopydone
	#else /* !XCHAL_HAVE_LOOPS */
	beqz a4, .Lbytecopydone
	add a7, a3, a4 # a7 = end address for source
	#endif /* !XCHAL_HAVE_LOOPS */
	.Lnextbyte:
	l8ui a6, a3, 0
	addi a3, a3, 1
	s8i a6, a5, 0
	addi a5, a5, 1
	#if !XCHAL_HAVE_LOOPS
	blt a3, a7, .Lnextbyte
	#endif /* !XCHAL_HAVE_LOOPS */
	.Lbytecopydone:
	retw

	/*
	* Destination is unaligned
	*/

	.align 4
	.Ldst1mod2: # dst is only byte aligned
	_bltui a4, 7, .Lbytecopy # do short copies byte by byte

	# copy 1 byte
	l8ui a6, a3, 0
	addi a3, a3, 1
	addi a4, a4, -1
	s8i a6, a5, 0
	addi a5, a5, 1
	_bbci.l a5, 1, .Ldstaligned # if dst is now aligned, then
	# return to main algorithm
	.Ldst2mod4: # dst 16-bit aligned
	# copy 2 bytes
	_bltui a4, 6, .Lbytecopy # do short copies byte by byte
	l8ui a6, a3, 0
	l8ui a7, a3, 1
	addi a3, a3, 2
	addi a4, a4, -2
	s8i a6, a5, 0
	s8i a7, a5, 1
	addi a5, a5, 2
	j .Ldstaligned # dst is now aligned, return to main algorithm

	.align 4
	.global memcpy
	.type memcpy,@function
	memcpy:
	.global memmove
	.type memmove,@function
	memmove:

	entry sp, 16 # minimal stack frame
	# a2/ dst, a3/ src, a4/ len
	mov a5, a2 # copy dst so that a2 is return value
	.Lcommon:
	_bbsi.l a2, 0, .Ldst1mod2 # if dst is 1 mod 2
	_bbsi.l a2, 1, .Ldst2mod4 # if dst is 2 mod 4
	.Ldstaligned: # return here from .Ldst?mod? once dst is aligned
	srli a7, a4, 4 # number of loop iterations with 16B
	# per iteration
	movi a8, 3 # if source is not aligned,
	_bany a3, a8, .Lsrcunaligned # then use shifting copy
	/*
	* Destination and source are word-aligned, use word copy.
	*/
	# copy 16 bytes per iteration for word-aligned dst and word-aligned src
	#if XCHAL_HAVE_LOOPS
	loopnez a7, .Loop1done
	#else /* !XCHAL_HAVE_LOOPS */
	beqz a7, .Loop1done
	slli a8, a7, 4
	add a8, a8, a3 # a8 = end of last 16B source chunk
	#endif /* !XCHAL_HAVE_LOOPS */
	.Loop1:
	l32i a6, a3, 0
	l32i a7, a3, 4
	s32i a6, a5, 0
	l32i a6, a3, 8
	s32i a7, a5, 4
	l32i a7, a3, 12
	s32i a6, a5, 8
	addi a3, a3, 16
	s32i a7, a5, 12
	addi a5, a5, 16
	#if !XCHAL_HAVE_LOOPS
	blt a3, a8, .Loop1
	#endif /* !XCHAL_HAVE_LOOPS */
	.Loop1done:
	bbci.l a4, 3, .L2
	# copy 8 bytes
	l32i a6, a3, 0
	l32i a7, a3, 4
	addi a3, a3, 8
	s32i a6, a5, 0
	s32i a7, a5, 4
	addi a5, a5, 8
	.L2:
	bbsi.l a4, 2, .L3
	bbsi.l a4, 1, .L4
	bbsi.l a4, 0, .L5
	retw
	.L3:
	# copy 4 bytes
	l32i a6, a3, 0
	addi a3, a3, 4
	s32i a6, a5, 0
	addi a5, a5, 4
	bbsi.l a4, 1, .L4
	bbsi.l a4, 0, .L5
	retw
	.L4:
	# copy 2 bytes
	l16ui a6, a3, 0
	addi a3, a3, 2
	s16i a6, a5, 0
	addi a5, a5, 2
	bbsi.l a4, 0, .L5
	retw
	.L5:
	# copy 1 byte
	l8ui a6, a3, 0
	s8i a6, a5, 0
	retw

	/*
	* Destination is aligned, Source is unaligned
	*/

	.align 4
	.Lsrcunaligned:
	_beqz a4, .Ldone # avoid loading anything for zero-length copies
	# copy 16 bytes per iteration for word-aligned dst and unaligned src
	ssa8 a3 # set shift amount from byte offset
	#define SIM_CHECKS_ALIGNMENT 1 /* set to 1 when running on ISS (simulator) with the
	lint or ferret client, or 0 to save a few cycles */
	#if XCHAL_UNALIGNED_LOAD_EXCEPTION \|\| SIM_CHECKS_ALIGNMENT
	and a11, a3, a8 # save unalignment offset for below
	sub a3, a3, a11 # align a3
	#endif
	l32i a6, a3, 0 # load first word
	#if XCHAL_HAVE_LOOPS
	loopnez a7, .Loop2done
	#else /* !XCHAL_HAVE_LOOPS */
	beqz a7, .Loop2done
	slli a10, a7, 4
	add a10, a10, a3 # a10 = end of last 16B source chunk
	#endif /* !XCHAL_HAVE_LOOPS */
	.Loop2:
	l32i a7, a3, 4
	l32i a8, a3, 8
	src_b a6, a6, a7
	s32i a6, a5, 0
	l32i a9, a3, 12
	src_b a7, a7, a8
	s32i a7, a5, 4
	l32i a6, a3, 16
	src_b a8, a8, a9
	s32i a8, a5, 8
	addi a3, a3, 16
	src_b a9, a9, a6
	s32i a9, a5, 12
	addi a5, a5, 16
	#if !XCHAL_HAVE_LOOPS
	blt a3, a10, .Loop2
	#endif /* !XCHAL_HAVE_LOOPS */
	.Loop2done:
	bbci.l a4, 3, .L12
	# copy 8 bytes
	l32i a7, a3, 4
	l32i a8, a3, 8
	src_b a6, a6, a7
	s32i a6, a5, 0
	addi a3, a3, 8
	src_b a7, a7, a8
	s32i a7, a5, 4
	addi a5, a5, 8
	mov a6, a8
	.L12:
	bbci.l a4, 2, .L13
	# copy 4 bytes
	l32i a7, a3, 4
	addi a3, a3, 4
	src_b a6, a6, a7
	s32i a6, a5, 0
	addi a5, a5, 4
	mov a6, a7
	.L13:
	#if XCHAL_UNALIGNED_LOAD_EXCEPTION \|\| SIM_CHECKS_ALIGNMENT
	add a3, a3, a11 # readjust a3 with correct misalignment
	#endif
	bbsi.l a4, 1, .L14
	bbsi.l a4, 0, .L15
	.Ldone: retw
	.L14:
	# copy 2 bytes
	l8ui a6, a3, 0
	l8ui a7, a3, 1
	addi a3, a3, 2
	s8i a6, a5, 0
	s8i a7, a5, 1
	addi a5, a5, 2
	bbsi.l a4, 0, .L15
	retw
	.L15:
	# copy 1 byte
	l8ui a6, a3, 0
	s8i a6, a5, 0
	retw

	/*
	* Local Variables:
	* mode:fundamental
	* comment-start: "# "
	* comment-start-skip: "# *"
	* End:
	*/