| /* |
| * Low-Level PCI Support for PC |
| * |
| * (c) 1999--2000 Martin Mares <mj@ucw.cz> |
| */ |
| |
| #include <linux/sched.h> |
| #include <linux/pci.h> |
| #include <linux/ioport.h> |
| #include <linux/init.h> |
| #include <linux/dmi.h> |
| |
| #include <asm/acpi.h> |
| #include <asm/segment.h> |
| #include <asm/io.h> |
| #include <asm/smp.h> |
| |
| #include "pci.h" |
| |
| unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 | |
| PCI_PROBE_MMCONF; |
| |
| int pci_routeirq; |
| int pcibios_last_bus = -1; |
| unsigned long pirq_table_addr; |
| struct pci_bus *pci_root_bus; |
| struct pci_raw_ops *raw_pci_ops; |
| |
| static int pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value) |
| { |
| return raw_pci_ops->read(0, bus->number, devfn, where, size, value); |
| } |
| |
| static int pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value) |
| { |
| return raw_pci_ops->write(0, bus->number, devfn, where, size, value); |
| } |
| |
| struct pci_ops pci_root_ops = { |
| .read = pci_read, |
| .write = pci_write, |
| }; |
| |
| /* |
| * legacy, numa, and acpi all want to call pcibios_scan_root |
| * from their initcalls. This flag prevents that. |
| */ |
| int pcibios_scanned; |
| |
| /* |
| * This interrupt-safe spinlock protects all accesses to PCI |
| * configuration space. |
| */ |
| DEFINE_SPINLOCK(pci_config_lock); |
| |
| /* |
| * Several buggy motherboards address only 16 devices and mirror |
| * them to next 16 IDs. We try to detect this `feature' on all |
| * primary buses (those containing host bridges as they are |
| * expected to be unique) and remove the ghost devices. |
| */ |
| |
| static void __devinit pcibios_fixup_ghosts(struct pci_bus *b) |
| { |
| struct list_head *ln, *mn; |
| struct pci_dev *d, *e; |
| int mirror = PCI_DEVFN(16,0); |
| int seen_host_bridge = 0; |
| int i; |
| |
| DBG("PCI: Scanning for ghost devices on bus %d\n", b->number); |
| list_for_each(ln, &b->devices) { |
| d = pci_dev_b(ln); |
| if ((d->class >> 8) == PCI_CLASS_BRIDGE_HOST) |
| seen_host_bridge++; |
| for (mn=ln->next; mn != &b->devices; mn=mn->next) { |
| e = pci_dev_b(mn); |
| if (e->devfn != d->devfn + mirror || |
| e->vendor != d->vendor || |
| e->device != d->device || |
| e->class != d->class) |
| continue; |
| for(i=0; i<PCI_NUM_RESOURCES; i++) |
| if (e->resource[i].start != d->resource[i].start || |
| e->resource[i].end != d->resource[i].end || |
| e->resource[i].flags != d->resource[i].flags) |
| continue; |
| break; |
| } |
| if (mn == &b->devices) |
| return; |
| } |
| if (!seen_host_bridge) |
| return; |
| printk(KERN_WARNING "PCI: Ignoring ghost devices on bus %02x\n", b->number); |
| |
| ln = &b->devices; |
| while (ln->next != &b->devices) { |
| d = pci_dev_b(ln->next); |
| if (d->devfn >= mirror) { |
| list_del(&d->global_list); |
| list_del(&d->bus_list); |
| kfree(d); |
| } else |
| ln = ln->next; |
| } |
| } |
| |
| /* |
| * Called after each bus is probed, but before its children |
| * are examined. |
| */ |
| |
| void __devinit pcibios_fixup_bus(struct pci_bus *b) |
| { |
| pcibios_fixup_ghosts(b); |
| pci_read_bridge_bases(b); |
| } |
| |
| /* |
| * Enable renumbering of PCI bus# ranges to reach all PCI busses (Cardbus) |
| */ |
| #ifdef __i386__ |
| static int __devinit assign_all_busses(struct dmi_system_id *d) |
| { |
| pci_probe |= PCI_ASSIGN_ALL_BUSSES; |
| printk(KERN_INFO "%s detected: enabling PCI bus# renumbering" |
| " (pci=assign-busses)\n", d->ident); |
| return 0; |
| } |
| #endif |
| |
| /* |
| * Laptops which need pci=assign-busses to see Cardbus cards |
| */ |
| static struct dmi_system_id __devinitdata pciprobe_dmi_table[] = { |
| #ifdef __i386__ |
| { |
| .callback = assign_all_busses, |
| .ident = "Samsung X20 Laptop", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Samsung Electronics"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "SX20S"), |
| }, |
| }, |
| #endif /* __i386__ */ |
| {} |
| }; |
| |
| struct pci_bus * __devinit pcibios_scan_root(int busnum) |
| { |
| struct pci_bus *bus = NULL; |
| |
| dmi_check_system(pciprobe_dmi_table); |
| |
| while ((bus = pci_find_next_bus(bus)) != NULL) { |
| if (bus->number == busnum) { |
| /* Already scanned */ |
| return bus; |
| } |
| } |
| |
| printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busnum); |
| |
| return pci_scan_bus_parented(NULL, busnum, &pci_root_ops, NULL); |
| } |
| |
| extern u8 pci_cache_line_size; |
| |
| static int __init pcibios_init(void) |
| { |
| struct cpuinfo_x86 *c = &boot_cpu_data; |
| |
| if (!raw_pci_ops) { |
| printk(KERN_WARNING "PCI: System does not support PCI\n"); |
| return 0; |
| } |
| |
| /* |
| * Assume PCI cacheline size of 32 bytes for all x86s except K7/K8 |
| * and P4. It's also good for 386/486s (which actually have 16) |
| * as quite a few PCI devices do not support smaller values. |
| */ |
| pci_cache_line_size = 32 >> 2; |
| if (c->x86 >= 6 && c->x86_vendor == X86_VENDOR_AMD) |
| pci_cache_line_size = 64 >> 2; /* K7 & K8 */ |
| else if (c->x86 > 6 && c->x86_vendor == X86_VENDOR_INTEL) |
| pci_cache_line_size = 128 >> 2; /* P4 */ |
| |
| pcibios_resource_survey(); |
| |
| #ifdef CONFIG_PCI_BIOS |
| if ((pci_probe & PCI_BIOS_SORT) && !(pci_probe & PCI_NO_SORT)) |
| pcibios_sort(); |
| #endif |
| return 0; |
| } |
| |
| subsys_initcall(pcibios_init); |
| |
| char * __devinit pcibios_setup(char *str) |
| { |
| if (!strcmp(str, "off")) { |
| pci_probe = 0; |
| return NULL; |
| } |
| #ifdef CONFIG_PCI_BIOS |
| else if (!strcmp(str, "bios")) { |
| pci_probe = PCI_PROBE_BIOS; |
| return NULL; |
| } else if (!strcmp(str, "nobios")) { |
| pci_probe &= ~PCI_PROBE_BIOS; |
| return NULL; |
| } else if (!strcmp(str, "nosort")) { |
| pci_probe |= PCI_NO_SORT; |
| return NULL; |
| } else if (!strcmp(str, "biosirq")) { |
| pci_probe |= PCI_BIOS_IRQ_SCAN; |
| return NULL; |
| } else if (!strncmp(str, "pirqaddr=", 9)) { |
| pirq_table_addr = simple_strtoul(str+9, NULL, 0); |
| return NULL; |
| } |
| #endif |
| #ifdef CONFIG_PCI_DIRECT |
| else if (!strcmp(str, "conf1")) { |
| pci_probe = PCI_PROBE_CONF1 | PCI_NO_CHECKS; |
| return NULL; |
| } |
| else if (!strcmp(str, "conf2")) { |
| pci_probe = PCI_PROBE_CONF2 | PCI_NO_CHECKS; |
| return NULL; |
| } |
| #endif |
| #ifdef CONFIG_PCI_MMCONFIG |
| else if (!strcmp(str, "nommconf")) { |
| pci_probe &= ~PCI_PROBE_MMCONF; |
| return NULL; |
| } |
| #endif |
| else if (!strcmp(str, "noacpi")) { |
| acpi_noirq_set(); |
| return NULL; |
| } |
| else if (!strcmp(str, "noearly")) { |
| pci_probe |= PCI_PROBE_NOEARLY; |
| return NULL; |
| } |
| #ifndef CONFIG_X86_VISWS |
| else if (!strcmp(str, "usepirqmask")) { |
| pci_probe |= PCI_USE_PIRQ_MASK; |
| return NULL; |
| } else if (!strncmp(str, "irqmask=", 8)) { |
| pcibios_irq_mask = simple_strtol(str+8, NULL, 0); |
| return NULL; |
| } else if (!strncmp(str, "lastbus=", 8)) { |
| pcibios_last_bus = simple_strtol(str+8, NULL, 0); |
| return NULL; |
| } |
| #endif |
| else if (!strcmp(str, "rom")) { |
| pci_probe |= PCI_ASSIGN_ROMS; |
| return NULL; |
| } else if (!strcmp(str, "assign-busses")) { |
| pci_probe |= PCI_ASSIGN_ALL_BUSSES; |
| return NULL; |
| } else if (!strcmp(str, "routeirq")) { |
| pci_routeirq = 1; |
| return NULL; |
| } |
| return str; |
| } |
| |
| unsigned int pcibios_assign_all_busses(void) |
| { |
| return (pci_probe & PCI_ASSIGN_ALL_BUSSES) ? 1 : 0; |
| } |
| |
| int pcibios_enable_device(struct pci_dev *dev, int mask) |
| { |
| int err; |
| |
| if ((err = pcibios_enable_resources(dev, mask)) < 0) |
| return err; |
| |
| return pcibios_enable_irq(dev); |
| } |
| |
| void pcibios_disable_device (struct pci_dev *dev) |
| { |
| pcibios_disable_resources(dev); |
| if (pcibios_disable_irq) |
| pcibios_disable_irq(dev); |
| } |