| /* drivers/misc/akm8975.c - akm8975 compass driver |
| * |
| * Copyright (C) 2007-2008 HTC Corporation. |
| * Author: Hou-Kun Chen <houkun.chen@gmail.com> |
| * |
| * This software is licensed under the terms of the GNU General Public |
| * License version 2, as published by the Free Software Foundation, and |
| * may be copied, distributed, and modified under those terms. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| /* |
| * Revised by AKM 2009/04/02 |
| * Revised by Motorola 2010/05/27 |
| * |
| */ |
| |
| #include <linux/interrupt.h> |
| #include <linux/i2c.h> |
| #include <linux/slab.h> |
| #include <linux/irq.h> |
| #include <linux/miscdevice.h> |
| #include <linux/gpio.h> |
| #include <linux/uaccess.h> |
| #include <linux/delay.h> |
| #include <linux/input.h> |
| #include <linux/workqueue.h> |
| #include <linux/freezer.h> |
| #include <linux/akm8975.h> |
| #include <linux/earlysuspend.h> |
| |
| #define AK8975DRV_CALL_DBG 0 |
| #if AK8975DRV_CALL_DBG |
| #define FUNCDBG(msg) pr_err("%s:%s\n", __func__, msg); |
| #else |
| #define FUNCDBG(msg) |
| #endif |
| |
| #define AK8975DRV_DATA_DBG 0 |
| #define MAX_FAILURE_COUNT 10 |
| |
| struct akm8975_data { |
| struct i2c_client *this_client; |
| struct akm8975_platform_data *pdata; |
| struct input_dev *input_dev; |
| struct work_struct work; |
| struct mutex flags_lock; |
| #ifdef CONFIG_HAS_EARLYSUSPEND |
| struct early_suspend early_suspend; |
| #endif |
| }; |
| |
| /* |
| * Because misc devices can not carry a pointer from driver register to |
| * open, we keep this global. This limits the driver to a single instance. |
| */ |
| struct akm8975_data *akmd_data; |
| |
| static DECLARE_WAIT_QUEUE_HEAD(open_wq); |
| |
| static atomic_t open_flag; |
| |
| static short m_flag; |
| static short a_flag; |
| static short t_flag; |
| static short mv_flag; |
| |
| static short akmd_delay; |
| |
| static ssize_t akm8975_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| return sprintf(buf, "%u\n", i2c_smbus_read_byte_data(client, |
| AK8975_REG_CNTL)); |
| } |
| static ssize_t akm8975_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| unsigned long val; |
| strict_strtoul(buf, 10, &val); |
| if (val > 0xff) |
| return -EINVAL; |
| i2c_smbus_write_byte_data(client, AK8975_REG_CNTL, val); |
| return count; |
| } |
| static DEVICE_ATTR(akm_ms1, S_IWUSR | S_IRUGO, akm8975_show, akm8975_store); |
| |
| static int akm8975_i2c_rxdata(struct akm8975_data *akm, char *buf, int length) |
| { |
| struct i2c_msg msgs[] = { |
| { |
| .addr = akm->this_client->addr, |
| .flags = 0, |
| .len = 1, |
| .buf = buf, |
| }, |
| { |
| .addr = akm->this_client->addr, |
| .flags = I2C_M_RD, |
| .len = length, |
| .buf = buf, |
| }, |
| }; |
| |
| FUNCDBG("called"); |
| |
| if (i2c_transfer(akm->this_client->adapter, msgs, 2) < 0) { |
| pr_err("akm8975_i2c_rxdata: transfer error\n"); |
| return EIO; |
| } else |
| return 0; |
| } |
| |
| static int akm8975_i2c_txdata(struct akm8975_data *akm, char *buf, int length) |
| { |
| struct i2c_msg msgs[] = { |
| { |
| .addr = akm->this_client->addr, |
| .flags = 0, |
| .len = length, |
| .buf = buf, |
| }, |
| }; |
| |
| FUNCDBG("called"); |
| |
| if (i2c_transfer(akm->this_client->adapter, msgs, 1) < 0) { |
| pr_err("akm8975_i2c_txdata: transfer error\n"); |
| return -EIO; |
| } else |
| return 0; |
| } |
| |
| static void akm8975_ecs_report_value(struct akm8975_data *akm, short *rbuf) |
| { |
| struct akm8975_data *data = i2c_get_clientdata(akm->this_client); |
| |
| FUNCDBG("called"); |
| |
| #if AK8975DRV_DATA_DBG |
| pr_info("akm8975_ecs_report_value: yaw = %d, pitch = %d, roll = %d\n", |
| rbuf[0], rbuf[1], rbuf[2]); |
| pr_info("tmp = %d, m_stat= %d, g_stat=%d\n", rbuf[3], rbuf[4], rbuf[5]); |
| pr_info("Acceleration: x = %d LSB, y = %d LSB, z = %d LSB\n", |
| rbuf[6], rbuf[7], rbuf[8]); |
| pr_info("Magnetic: x = %d LSB, y = %d LSB, z = %d LSB\n\n", |
| rbuf[9], rbuf[10], rbuf[11]); |
| #endif |
| mutex_lock(&akm->flags_lock); |
| /* Report magnetic sensor information */ |
| if (m_flag) { |
| input_report_abs(data->input_dev, ABS_RX, rbuf[0]); |
| input_report_abs(data->input_dev, ABS_RY, rbuf[1]); |
| input_report_abs(data->input_dev, ABS_RZ, rbuf[2]); |
| input_report_abs(data->input_dev, ABS_RUDDER, rbuf[4]); |
| } |
| |
| /* Report acceleration sensor information */ |
| if (a_flag) { |
| input_report_abs(data->input_dev, ABS_X, rbuf[6]); |
| input_report_abs(data->input_dev, ABS_Y, rbuf[7]); |
| input_report_abs(data->input_dev, ABS_Z, rbuf[8]); |
| input_report_abs(data->input_dev, ABS_WHEEL, rbuf[5]); |
| } |
| |
| /* Report temperature information */ |
| if (t_flag) |
| input_report_abs(data->input_dev, ABS_THROTTLE, rbuf[3]); |
| |
| if (mv_flag) { |
| input_report_abs(data->input_dev, ABS_HAT0X, rbuf[9]); |
| input_report_abs(data->input_dev, ABS_HAT0Y, rbuf[10]); |
| input_report_abs(data->input_dev, ABS_BRAKE, rbuf[11]); |
| } |
| mutex_unlock(&akm->flags_lock); |
| |
| input_sync(data->input_dev); |
| } |
| |
| static void akm8975_ecs_close_done(struct akm8975_data *akm) |
| { |
| FUNCDBG("called"); |
| mutex_lock(&akm->flags_lock); |
| m_flag = 1; |
| a_flag = 1; |
| t_flag = 1; |
| mv_flag = 1; |
| mutex_unlock(&akm->flags_lock); |
| } |
| |
| static int akm_aot_open(struct inode *inode, struct file *file) |
| { |
| int ret = -1; |
| |
| FUNCDBG("called"); |
| if (atomic_cmpxchg(&open_flag, 0, 1) == 0) { |
| wake_up(&open_wq); |
| ret = 0; |
| } |
| |
| ret = nonseekable_open(inode, file); |
| if (ret) |
| return ret; |
| |
| file->private_data = akmd_data; |
| |
| return ret; |
| } |
| |
| static int akm_aot_release(struct inode *inode, struct file *file) |
| { |
| FUNCDBG("called"); |
| atomic_set(&open_flag, 0); |
| wake_up(&open_wq); |
| return 0; |
| } |
| |
| static int akm_aot_ioctl(struct inode *inode, struct file *file, |
| unsigned int cmd, unsigned long arg) |
| { |
| void __user *argp = (void __user *) arg; |
| short flag; |
| struct akm8975_data *akm = file->private_data; |
| |
| FUNCDBG("called"); |
| |
| switch (cmd) { |
| case ECS_IOCTL_APP_SET_MFLAG: |
| case ECS_IOCTL_APP_SET_AFLAG: |
| case ECS_IOCTL_APP_SET_MVFLAG: |
| if (copy_from_user(&flag, argp, sizeof(flag))) |
| return -EFAULT; |
| if (flag < 0 || flag > 1) |
| return -EINVAL; |
| break; |
| case ECS_IOCTL_APP_SET_DELAY: |
| if (copy_from_user(&flag, argp, sizeof(flag))) |
| return -EFAULT; |
| break; |
| default: |
| break; |
| } |
| |
| mutex_lock(&akm->flags_lock); |
| switch (cmd) { |
| case ECS_IOCTL_APP_SET_MFLAG: |
| m_flag = flag; |
| break; |
| case ECS_IOCTL_APP_GET_MFLAG: |
| flag = m_flag; |
| break; |
| case ECS_IOCTL_APP_SET_AFLAG: |
| a_flag = flag; |
| break; |
| case ECS_IOCTL_APP_GET_AFLAG: |
| flag = a_flag; |
| break; |
| case ECS_IOCTL_APP_SET_MVFLAG: |
| mv_flag = flag; |
| break; |
| case ECS_IOCTL_APP_GET_MVFLAG: |
| flag = mv_flag; |
| break; |
| case ECS_IOCTL_APP_SET_DELAY: |
| akmd_delay = flag; |
| break; |
| case ECS_IOCTL_APP_GET_DELAY: |
| flag = akmd_delay; |
| break; |
| default: |
| return -ENOTTY; |
| } |
| mutex_unlock(&akm->flags_lock); |
| |
| switch (cmd) { |
| case ECS_IOCTL_APP_GET_MFLAG: |
| case ECS_IOCTL_APP_GET_AFLAG: |
| case ECS_IOCTL_APP_GET_MVFLAG: |
| case ECS_IOCTL_APP_GET_DELAY: |
| if (copy_to_user(argp, &flag, sizeof(flag))) |
| return -EFAULT; |
| break; |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int akmd_open(struct inode *inode, struct file *file) |
| { |
| int err = 0; |
| |
| FUNCDBG("called"); |
| err = nonseekable_open(inode, file); |
| if (err) |
| return err; |
| |
| file->private_data = akmd_data; |
| return 0; |
| } |
| |
| static int akmd_release(struct inode *inode, struct file *file) |
| { |
| struct akm8975_data *akm = file->private_data; |
| |
| FUNCDBG("called"); |
| akm8975_ecs_close_done(akm); |
| return 0; |
| } |
| |
| static int akmd_ioctl(struct inode *inode, struct file *file, unsigned int cmd, |
| unsigned long arg) |
| { |
| void __user *argp = (void __user *) arg; |
| |
| char rwbuf[16]; |
| int ret = -1; |
| int status; |
| short value[12]; |
| short delay; |
| struct akm8975_data *akm = file->private_data; |
| |
| FUNCDBG("called"); |
| |
| switch (cmd) { |
| case ECS_IOCTL_READ: |
| case ECS_IOCTL_WRITE: |
| if (copy_from_user(&rwbuf, argp, sizeof(rwbuf))) |
| return -EFAULT; |
| break; |
| |
| case ECS_IOCTL_SET_YPR: |
| if (copy_from_user(&value, argp, sizeof(value))) |
| return -EFAULT; |
| break; |
| |
| default: |
| break; |
| } |
| |
| switch (cmd) { |
| case ECS_IOCTL_READ: |
| if (rwbuf[0] < 1) |
| return -EINVAL; |
| |
| ret = akm8975_i2c_rxdata(akm, &rwbuf[1], rwbuf[0]); |
| if (ret < 0) |
| return ret; |
| break; |
| |
| case ECS_IOCTL_WRITE: |
| if (rwbuf[0] < 2) |
| return -EINVAL; |
| |
| ret = akm8975_i2c_txdata(akm, &rwbuf[1], rwbuf[0]); |
| if (ret < 0) |
| return ret; |
| break; |
| case ECS_IOCTL_SET_YPR: |
| akm8975_ecs_report_value(akm, value); |
| break; |
| |
| case ECS_IOCTL_GET_OPEN_STATUS: |
| wait_event_interruptible(open_wq, |
| (atomic_read(&open_flag) != 0)); |
| status = atomic_read(&open_flag); |
| break; |
| case ECS_IOCTL_GET_CLOSE_STATUS: |
| wait_event_interruptible(open_wq, |
| (atomic_read(&open_flag) == 0)); |
| status = atomic_read(&open_flag); |
| break; |
| |
| case ECS_IOCTL_GET_DELAY: |
| delay = akmd_delay; |
| break; |
| |
| default: |
| FUNCDBG("Unknown cmd\n"); |
| return -ENOTTY; |
| } |
| |
| switch (cmd) { |
| case ECS_IOCTL_READ: |
| if (copy_to_user(argp, &rwbuf, sizeof(rwbuf))) |
| return -EFAULT; |
| break; |
| case ECS_IOCTL_GET_OPEN_STATUS: |
| case ECS_IOCTL_GET_CLOSE_STATUS: |
| if (copy_to_user(argp, &status, sizeof(status))) |
| return -EFAULT; |
| break; |
| case ECS_IOCTL_GET_DELAY: |
| if (copy_to_user(argp, &delay, sizeof(delay))) |
| return -EFAULT; |
| break; |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| /* needed to clear the int. pin */ |
| static void akm_work_func(struct work_struct *work) |
| { |
| struct akm8975_data *akm = |
| container_of(work, struct akm8975_data, work); |
| |
| FUNCDBG("called"); |
| enable_irq(akm->this_client->irq); |
| } |
| |
| static irqreturn_t akm8975_interrupt(int irq, void *dev_id) |
| { |
| struct akm8975_data *akm = dev_id; |
| FUNCDBG("called"); |
| |
| disable_irq_nosync(akm->this_client->irq); |
| schedule_work(&akm->work); |
| return IRQ_HANDLED; |
| } |
| |
| static int akm8975_power_off(struct akm8975_data *akm) |
| { |
| #if AK8975DRV_CALL_DBG |
| pr_info("%s\n", __func__); |
| #endif |
| if (akm->pdata->power_off) |
| akm->pdata->power_off(); |
| |
| return 0; |
| } |
| |
| static int akm8975_power_on(struct akm8975_data *akm) |
| { |
| int err; |
| |
| #if AK8975DRV_CALL_DBG |
| pr_info("%s\n", __func__); |
| #endif |
| if (akm->pdata->power_on) { |
| err = akm->pdata->power_on(); |
| if (err < 0) |
| return err; |
| } |
| return 0; |
| } |
| |
| static int akm8975_suspend(struct i2c_client *client, pm_message_t mesg) |
| { |
| struct akm8975_data *akm = i2c_get_clientdata(client); |
| |
| #if AK8975DRV_CALL_DBG |
| pr_info("%s\n", __func__); |
| #endif |
| /* TO DO: might need more work after power mgmt |
| is enabled */ |
| return akm8975_power_off(akm); |
| } |
| |
| static int akm8975_resume(struct i2c_client *client) |
| { |
| struct akm8975_data *akm = i2c_get_clientdata(client); |
| |
| #if AK8975DRV_CALL_DBG |
| pr_info("%s\n", __func__); |
| #endif |
| /* TO DO: might need more work after power mgmt |
| is enabled */ |
| return akm8975_power_on(akm); |
| } |
| |
| #ifdef CONFIG_HAS_EARLYSUSPEND |
| static void akm8975_early_suspend(struct early_suspend *handler) |
| { |
| struct akm8975_data *akm; |
| akm = container_of(handler, struct akm8975_data, early_suspend); |
| |
| #if AK8975DRV_CALL_DBG |
| pr_info("%s\n", __func__); |
| #endif |
| akm8975_suspend(akm->this_client, PMSG_SUSPEND); |
| } |
| |
| static void akm8975_early_resume(struct early_suspend *handler) |
| { |
| struct akm8975_data *akm; |
| akm = container_of(handler, struct akm8975_data, early_suspend); |
| |
| #if AK8975DRV_CALL_DBG |
| pr_info("%s\n", __func__); |
| #endif |
| akm8975_resume(akm->this_client); |
| } |
| #endif |
| |
| |
| static int akm8975_init_client(struct i2c_client *client) |
| { |
| struct akm8975_data *data; |
| int ret; |
| |
| data = i2c_get_clientdata(client); |
| |
| ret = request_irq(client->irq, akm8975_interrupt, IRQF_TRIGGER_RISING, |
| "akm8975", data); |
| |
| if (ret < 0) { |
| pr_err("akm8975_init_client: request irq failed\n"); |
| goto err; |
| } |
| |
| init_waitqueue_head(&open_wq); |
| |
| mutex_lock(&data->flags_lock); |
| m_flag = 1; |
| a_flag = 1; |
| t_flag = 1; |
| mv_flag = 1; |
| mutex_unlock(&data->flags_lock); |
| |
| return 0; |
| err: |
| return ret; |
| } |
| |
| static const struct file_operations akmd_fops = { |
| .owner = THIS_MODULE, |
| .open = akmd_open, |
| .release = akmd_release, |
| .ioctl = akmd_ioctl, |
| }; |
| |
| static const struct file_operations akm_aot_fops = { |
| .owner = THIS_MODULE, |
| .open = akm_aot_open, |
| .release = akm_aot_release, |
| .ioctl = akm_aot_ioctl, |
| }; |
| |
| static struct miscdevice akm_aot_device = { |
| .minor = MISC_DYNAMIC_MINOR, |
| .name = "akm8975_aot", |
| .fops = &akm_aot_fops, |
| }; |
| |
| static struct miscdevice akmd_device = { |
| .minor = MISC_DYNAMIC_MINOR, |
| .name = "akm8975_dev", |
| .fops = &akmd_fops, |
| }; |
| |
| int akm8975_probe(struct i2c_client *client, |
| const struct i2c_device_id *devid) |
| { |
| struct akm8975_data *akm; |
| int err; |
| FUNCDBG("called"); |
| |
| if (client->dev.platform_data == NULL) { |
| dev_err(&client->dev, "platform data is NULL. exiting.\n"); |
| err = -ENODEV; |
| goto exit_platform_data_null; |
| } |
| |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { |
| dev_err(&client->dev, "platform data is NULL. exiting.\n"); |
| err = -ENODEV; |
| goto exit_check_functionality_failed; |
| } |
| |
| akm = kzalloc(sizeof(struct akm8975_data), GFP_KERNEL); |
| if (!akm) { |
| dev_err(&client->dev, |
| "failed to allocate memory for module data\n"); |
| err = -ENOMEM; |
| goto exit_alloc_data_failed; |
| } |
| |
| akm->pdata = client->dev.platform_data; |
| |
| mutex_init(&akm->flags_lock); |
| INIT_WORK(&akm->work, akm_work_func); |
| i2c_set_clientdata(client, akm); |
| |
| err = akm8975_power_on(akm); |
| if (err < 0) |
| goto exit_power_on_failed; |
| |
| akm8975_init_client(client); |
| akm->this_client = client; |
| akmd_data = akm; |
| |
| akm->input_dev = input_allocate_device(); |
| if (!akm->input_dev) { |
| err = -ENOMEM; |
| dev_err(&akm->this_client->dev, |
| "input device allocate failed\n"); |
| goto exit_input_dev_alloc_failed; |
| } |
| |
| set_bit(EV_ABS, akm->input_dev->evbit); |
| |
| /* yaw */ |
| input_set_abs_params(akm->input_dev, ABS_RX, 0, 23040, 0, 0); |
| /* pitch */ |
| input_set_abs_params(akm->input_dev, ABS_RY, -11520, 11520, 0, 0); |
| /* roll */ |
| input_set_abs_params(akm->input_dev, ABS_RZ, -5760, 5760, 0, 0); |
| /* x-axis acceleration */ |
| input_set_abs_params(akm->input_dev, ABS_X, -5760, 5760, 0, 0); |
| /* y-axis acceleration */ |
| input_set_abs_params(akm->input_dev, ABS_Y, -5760, 5760, 0, 0); |
| /* z-axis acceleration */ |
| input_set_abs_params(akm->input_dev, ABS_Z, -5760, 5760, 0, 0); |
| /* temparature */ |
| input_set_abs_params(akm->input_dev, ABS_THROTTLE, -30, 85, 0, 0); |
| /* status of magnetic sensor */ |
| input_set_abs_params(akm->input_dev, ABS_RUDDER, 0, 3, 0, 0); |
| /* status of acceleration sensor */ |
| input_set_abs_params(akm->input_dev, ABS_WHEEL, 0, 3, 0, 0); |
| /* x-axis of raw magnetic vector */ |
| input_set_abs_params(akm->input_dev, ABS_HAT0X, -20480, 20479, 0, 0); |
| /* y-axis of raw magnetic vector */ |
| input_set_abs_params(akm->input_dev, ABS_HAT0Y, -20480, 20479, 0, 0); |
| /* z-axis of raw magnetic vector */ |
| input_set_abs_params(akm->input_dev, ABS_BRAKE, -20480, 20479, 0, 0); |
| |
| akm->input_dev->name = "compass"; |
| |
| err = input_register_device(akm->input_dev); |
| if (err) { |
| pr_err("akm8975_probe: Unable to register input device: %s\n", |
| akm->input_dev->name); |
| goto exit_input_register_device_failed; |
| } |
| |
| err = misc_register(&akmd_device); |
| if (err) { |
| pr_err("akm8975_probe: akmd_device register failed\n"); |
| goto exit_misc_device_register_failed; |
| } |
| |
| err = misc_register(&akm_aot_device); |
| if (err) { |
| pr_err("akm8975_probe: akm_aot_device register failed\n"); |
| goto exit_misc_device_register_failed; |
| } |
| |
| err = device_create_file(&client->dev, &dev_attr_akm_ms1); |
| |
| #ifdef CONFIG_HAS_EARLYSUSPEND |
| akm->early_suspend.suspend = akm8975_early_suspend; |
| akm->early_suspend.resume = akm8975_early_resume; |
| register_early_suspend(&akm->early_suspend); |
| #endif |
| return 0; |
| |
| exit_misc_device_register_failed: |
| exit_input_register_device_failed: |
| input_free_device(akm->input_dev); |
| exit_input_dev_alloc_failed: |
| akm8975_power_off(akm); |
| exit_power_on_failed: |
| kfree(akm); |
| exit_alloc_data_failed: |
| exit_check_functionality_failed: |
| exit_platform_data_null: |
| return err; |
| } |
| |
| static int __devexit akm8975_remove(struct i2c_client *client) |
| { |
| struct akm8975_data *akm = i2c_get_clientdata(client); |
| FUNCDBG("called"); |
| free_irq(client->irq, NULL); |
| input_unregister_device(akm->input_dev); |
| misc_deregister(&akmd_device); |
| misc_deregister(&akm_aot_device); |
| akm8975_power_off(akm); |
| kfree(akm); |
| return 0; |
| } |
| |
| static const struct i2c_device_id akm8975_id[] = { |
| { "akm8975", 0 }, |
| { } |
| }; |
| |
| MODULE_DEVICE_TABLE(i2c, akm8975_id); |
| |
| static struct i2c_driver akm8975_driver = { |
| .probe = akm8975_probe, |
| .remove = akm8975_remove, |
| #ifndef CONFIG_HAS_EARLYSUSPEND |
| .resume = akm8975_resume, |
| .suspend = akm8975_suspend, |
| #endif |
| .id_table = akm8975_id, |
| .driver = { |
| .name = "akm8975", |
| }, |
| }; |
| |
| static int __init akm8975_init(void) |
| { |
| pr_info("AK8975 compass driver: init\n"); |
| FUNCDBG("AK8975 compass driver: init\n"); |
| return i2c_add_driver(&akm8975_driver); |
| } |
| |
| static void __exit akm8975_exit(void) |
| { |
| FUNCDBG("AK8975 compass driver: exit\n"); |
| i2c_del_driver(&akm8975_driver); |
| } |
| |
| module_init(akm8975_init); |
| module_exit(akm8975_exit); |
| |
| MODULE_AUTHOR("Hou-Kun Chen <hk_chen@htc.com>"); |
| MODULE_DESCRIPTION("AK8975 compass driver"); |
| MODULE_LICENSE("GPL"); |