| /* |
| * Copyright (c) 2011-2013, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #define pr_fmt(fmt) "%s: " fmt, __func__ |
| |
| #include <linux/module.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/string.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/spmi.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/thermal.h> |
| #include <linux/qpnp/qpnp-adc.h> |
| |
| #define QPNP_TM_DRIVER_NAME "qcom,qpnp-temp-alarm" |
| |
| enum qpnp_tm_registers { |
| QPNP_TM_REG_TYPE = 0x04, |
| QPNP_TM_REG_SUBTYPE = 0x05, |
| QPNP_TM_REG_STATUS = 0x08, |
| QPNP_TM_REG_SHUTDOWN_CTRL1 = 0x40, |
| QPNP_TM_REG_SHUTDOWN_CTRL2 = 0x42, |
| QPNP_TM_REG_ALARM_CTRL = 0x46, |
| }; |
| |
| #define QPNP_TM_TYPE 0x09 |
| #define QPNP_TM_SUBTYPE 0x08 |
| |
| #define STATUS_STAGE_MASK 0x03 |
| |
| #define SHUTDOWN_CTRL1_OVERRIDE_STAGE3 0x80 |
| #define SHUTDOWN_CTRL1_OVERRIDE_STAGE2 0x40 |
| #define SHUTDOWN_CTRL1_THRESHOLD_MASK 0x03 |
| |
| #define SHUTDOWN_CTRL2_CLEAR_STAGE3 0x80 |
| #define SHUTDOWN_CTRL2_CLEAR_STAGE2 0x40 |
| |
| #define ALARM_CTRL_FORCE_ENABLE 0x80 |
| #define ALARM_CTRL_FOLLOW_HW_ENABLE 0x01 |
| |
| #define TEMP_STAGE_STEP 20000 /* Stage step: 20.000 C */ |
| #define TEMP_STAGE_HYSTERESIS 2000 |
| |
| #define TEMP_THRESH_MIN 105000 /* Threshold Min: 105 C */ |
| #define TEMP_THRESH_STEP 5000 /* Threshold step: 5 C */ |
| |
| #define THRESH_MIN 0 |
| #define THRESH_MAX 3 |
| |
| /* Trip points from most critical to least critical */ |
| #define TRIP_STAGE3 0 |
| #define TRIP_STAGE2 1 |
| #define TRIP_STAGE1 2 |
| #define TRIP_NUM 3 |
| |
| enum qpnp_tm_adc_type { |
| QPNP_TM_ADC_NONE, /* Estimates temp based on overload level. */ |
| QPNP_TM_ADC_QPNP_ADC, |
| }; |
| |
| /* |
| * Temperature in millicelcius reported during stage 0 if no ADC is present and |
| * no value has been specified via device tree. |
| */ |
| #define DEFAULT_NO_ADC_TEMP 37000 |
| |
| struct qpnp_tm_chip { |
| struct delayed_work irq_work; |
| struct spmi_device *spmi_dev; |
| struct thermal_zone_device *tz_dev; |
| const char *tm_name; |
| enum qpnp_tm_adc_type adc_type; |
| unsigned long temperature; |
| enum thermal_device_mode mode; |
| unsigned int thresh; |
| unsigned int stage; |
| unsigned int prev_stage; |
| int irq; |
| enum qpnp_vadc_channels adc_channel; |
| u16 base_addr; |
| bool allow_software_override; |
| struct qpnp_vadc_chip *vadc_dev; |
| }; |
| |
| /* Delay between TEMP_STAT IRQ going high and status value changing in ms. */ |
| #define STATUS_REGISTER_DELAY_MS 40 |
| |
| enum pmic_thermal_override_mode { |
| SOFTWARE_OVERRIDE_DISABLED = 0, |
| SOFTWARE_OVERRIDE_ENABLED, |
| }; |
| |
| static inline int qpnp_tm_read(struct qpnp_tm_chip *chip, u16 addr, u8 *buf, |
| int len) |
| { |
| int rc; |
| |
| rc = spmi_ext_register_readl(chip->spmi_dev->ctrl, |
| chip->spmi_dev->sid, chip->base_addr + addr, buf, len); |
| |
| if (rc) |
| dev_err(&chip->spmi_dev->dev, "%s: spmi_ext_register_readl() failed. sid=%d, addr=%04X, len=%d, rc=%d\n", |
| __func__, chip->spmi_dev->sid, chip->base_addr + addr, |
| len, rc); |
| |
| return rc; |
| } |
| |
| static inline int qpnp_tm_write(struct qpnp_tm_chip *chip, u16 addr, u8 *buf, |
| int len) |
| { |
| int rc; |
| |
| rc = spmi_ext_register_writel(chip->spmi_dev->ctrl, |
| chip->spmi_dev->sid, chip->base_addr + addr, buf, len); |
| |
| if (rc) |
| dev_err(&chip->spmi_dev->dev, "%s: spmi_ext_register_writel() failed. sid=%d, addr=%04X, len=%d, rc=%d\n", |
| __func__, chip->spmi_dev->sid, chip->base_addr + addr, |
| len, rc); |
| |
| return rc; |
| } |
| |
| |
| static inline int qpnp_tm_shutdown_override(struct qpnp_tm_chip *chip, |
| enum pmic_thermal_override_mode mode) |
| { |
| int rc = 0; |
| u8 reg; |
| |
| if (chip->allow_software_override) { |
| reg = chip->thresh & SHUTDOWN_CTRL1_THRESHOLD_MASK; |
| |
| if (mode == SOFTWARE_OVERRIDE_ENABLED) |
| reg |= SHUTDOWN_CTRL1_OVERRIDE_STAGE2 |
| | SHUTDOWN_CTRL1_OVERRIDE_STAGE3; |
| |
| rc = qpnp_tm_write(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, ®, 1); |
| } |
| |
| return rc; |
| } |
| |
| static int qpnp_tm_update_temp(struct qpnp_tm_chip *chip) |
| { |
| struct qpnp_vadc_result adc_result; |
| int rc; |
| |
| rc = qpnp_vadc_read(chip->vadc_dev, chip->adc_channel, &adc_result); |
| if (!rc) |
| chip->temperature = adc_result.physical; |
| else |
| dev_err(&chip->spmi_dev->dev, "%s: qpnp_vadc_read(%d) failed, rc=%d\n", |
| __func__, chip->adc_channel, rc); |
| |
| return rc; |
| } |
| |
| /* |
| * This function initializes the internal temperature value based on only the |
| * current thermal stage and threshold. |
| */ |
| static int qpnp_tm_init_temp_no_adc(struct qpnp_tm_chip *chip) |
| { |
| int rc; |
| u8 reg; |
| |
| rc = qpnp_tm_read(chip, QPNP_TM_REG_STATUS, ®, 1); |
| if (rc < 0) |
| return rc; |
| |
| chip->stage = reg & STATUS_STAGE_MASK; |
| |
| if (chip->stage) |
| chip->temperature = chip->thresh * TEMP_THRESH_STEP + |
| (chip->stage - 1) * TEMP_STAGE_STEP + |
| TEMP_THRESH_MIN; |
| |
| return 0; |
| } |
| |
| /* |
| * This function updates the internal temperature value based on the |
| * current thermal stage and threshold as well as the previous stage |
| */ |
| static int qpnp_tm_update_temp_no_adc(struct qpnp_tm_chip *chip) |
| { |
| unsigned int stage; |
| int rc; |
| u8 reg; |
| |
| rc = qpnp_tm_read(chip, QPNP_TM_REG_STATUS, ®, 1); |
| if (rc < 0) |
| return rc; |
| |
| stage = reg & STATUS_STAGE_MASK; |
| |
| if (stage > chip->stage) { |
| /* increasing stage, use lower bound */ |
| chip->temperature = (stage - 1) * TEMP_STAGE_STEP |
| + chip->thresh * TEMP_THRESH_STEP |
| + TEMP_STAGE_HYSTERESIS + TEMP_THRESH_MIN; |
| } else if (stage < chip->stage) { |
| /* decreasing stage, use upper bound */ |
| chip->temperature = stage * TEMP_STAGE_STEP |
| + chip->thresh * TEMP_THRESH_STEP |
| - TEMP_STAGE_HYSTERESIS + TEMP_THRESH_MIN; |
| } |
| |
| chip->stage = stage; |
| |
| return 0; |
| } |
| |
| static int qpnp_tz_get_temp_no_adc(struct thermal_zone_device *thermal, |
| unsigned long *temperature) |
| { |
| struct qpnp_tm_chip *chip = thermal->devdata; |
| int rc; |
| |
| if (!temperature) |
| return -EINVAL; |
| |
| rc = qpnp_tm_update_temp_no_adc(chip); |
| if (rc < 0) |
| return rc; |
| |
| *temperature = chip->temperature; |
| |
| return 0; |
| } |
| |
| static int qpnp_tz_get_temp_qpnp_adc(struct thermal_zone_device *thermal, |
| unsigned long *temperature) |
| { |
| struct qpnp_tm_chip *chip = thermal->devdata; |
| int rc; |
| |
| if (!temperature) |
| return -EINVAL; |
| |
| rc = qpnp_tm_update_temp(chip); |
| if (rc < 0) { |
| dev_err(&chip->spmi_dev->dev, "%s: %s: adc read failed, rc = %d\n", |
| __func__, chip->tm_name, rc); |
| return rc; |
| } |
| |
| *temperature = chip->temperature; |
| |
| return 0; |
| } |
| |
| static int qpnp_tz_get_mode(struct thermal_zone_device *thermal, |
| enum thermal_device_mode *mode) |
| { |
| struct qpnp_tm_chip *chip = thermal->devdata; |
| |
| if (!mode) |
| return -EINVAL; |
| |
| *mode = chip->mode; |
| |
| return 0; |
| } |
| |
| static int qpnp_tz_set_mode(struct thermal_zone_device *thermal, |
| enum thermal_device_mode mode) |
| { |
| struct qpnp_tm_chip *chip = thermal->devdata; |
| int rc = 0; |
| |
| if (mode != chip->mode) { |
| if (mode == THERMAL_DEVICE_ENABLED) |
| rc = qpnp_tm_shutdown_override(chip, |
| SOFTWARE_OVERRIDE_ENABLED); |
| else |
| rc = qpnp_tm_shutdown_override(chip, |
| SOFTWARE_OVERRIDE_DISABLED); |
| |
| chip->mode = mode; |
| } |
| |
| return rc; |
| } |
| |
| static int qpnp_tz_get_trip_type(struct thermal_zone_device *thermal, |
| int trip, enum thermal_trip_type *type) |
| { |
| if (trip < 0 || !type) |
| return -EINVAL; |
| |
| switch (trip) { |
| case TRIP_STAGE3: |
| *type = THERMAL_TRIP_CRITICAL; |
| break; |
| case TRIP_STAGE2: |
| *type = THERMAL_TRIP_HOT; |
| break; |
| case TRIP_STAGE1: |
| *type = THERMAL_TRIP_HOT; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int qpnp_tz_get_trip_temp(struct thermal_zone_device *thermal, |
| int trip, unsigned long *temperature) |
| { |
| struct qpnp_tm_chip *chip = thermal->devdata; |
| int thresh_temperature; |
| |
| if (trip < 0 || !temperature) |
| return -EINVAL; |
| |
| thresh_temperature = chip->thresh * TEMP_THRESH_STEP + TEMP_THRESH_MIN; |
| |
| switch (trip) { |
| case TRIP_STAGE3: |
| thresh_temperature += 2 * TEMP_STAGE_STEP; |
| break; |
| case TRIP_STAGE2: |
| thresh_temperature += TEMP_STAGE_STEP; |
| break; |
| case TRIP_STAGE1: |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| *temperature = thresh_temperature; |
| |
| return 0; |
| } |
| |
| static int qpnp_tz_get_crit_temp(struct thermal_zone_device *thermal, |
| unsigned long *temperature) |
| { |
| struct qpnp_tm_chip *chip = thermal->devdata; |
| |
| if (!temperature) |
| return -EINVAL; |
| |
| *temperature = chip->thresh * TEMP_THRESH_STEP + TEMP_THRESH_MIN + |
| 2 * TEMP_STAGE_STEP; |
| |
| return 0; |
| } |
| |
| static struct thermal_zone_device_ops qpnp_thermal_zone_ops_no_adc = { |
| .get_temp = qpnp_tz_get_temp_no_adc, |
| .get_mode = qpnp_tz_get_mode, |
| .set_mode = qpnp_tz_set_mode, |
| .get_trip_type = qpnp_tz_get_trip_type, |
| .get_trip_temp = qpnp_tz_get_trip_temp, |
| .get_crit_temp = qpnp_tz_get_crit_temp, |
| }; |
| |
| static struct thermal_zone_device_ops qpnp_thermal_zone_ops_qpnp_adc = { |
| .get_temp = qpnp_tz_get_temp_qpnp_adc, |
| .get_mode = qpnp_tz_get_mode, |
| .set_mode = qpnp_tz_set_mode, |
| .get_trip_type = qpnp_tz_get_trip_type, |
| .get_trip_temp = qpnp_tz_get_trip_temp, |
| .get_crit_temp = qpnp_tz_get_crit_temp, |
| }; |
| |
| static void qpnp_tm_work(struct work_struct *work) |
| { |
| struct delayed_work *dwork |
| = container_of(work, struct delayed_work, work); |
| struct qpnp_tm_chip *chip |
| = container_of(dwork, struct qpnp_tm_chip, irq_work); |
| int rc; |
| u8 reg; |
| |
| if (chip->adc_type == QPNP_TM_ADC_NONE) { |
| rc = qpnp_tm_update_temp_no_adc(chip); |
| if (rc < 0) |
| goto bail; |
| } else { |
| rc = qpnp_tm_read(chip, QPNP_TM_REG_STATUS, ®, 1); |
| if (rc < 0) |
| goto bail; |
| |
| chip->stage = reg & STATUS_STAGE_MASK; |
| |
| rc = qpnp_tm_update_temp(chip); |
| if (rc < 0) |
| goto bail; |
| } |
| |
| if (chip->stage != chip->prev_stage) { |
| chip->prev_stage = chip->stage; |
| |
| pr_crit("%s: PMIC Temp Alarm - stage=%u, threshold=%u, temperature=%lu mC\n", |
| chip->tm_name, chip->stage, chip->thresh, |
| chip->temperature); |
| |
| thermal_zone_device_update(chip->tz_dev); |
| |
| /* Notify user space */ |
| sysfs_notify(&chip->tz_dev->device.kobj, NULL, "type"); |
| } |
| |
| bail: |
| return; |
| } |
| |
| static irqreturn_t qpnp_tm_isr(int irq, void *data) |
| { |
| struct qpnp_tm_chip *chip = data; |
| |
| schedule_delayed_work(&chip->irq_work, |
| msecs_to_jiffies(STATUS_REGISTER_DELAY_MS) + 1); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int qpnp_tm_init_reg(struct qpnp_tm_chip *chip) |
| { |
| int rc = 0; |
| u8 reg; |
| |
| if (chip->thresh < THRESH_MIN || chip->thresh > THRESH_MAX) { |
| /* Read hardware threshold value if configuration is invalid. */ |
| rc = qpnp_tm_read(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, ®, 1); |
| if (rc < 0) |
| return rc; |
| chip->thresh = reg & SHUTDOWN_CTRL1_THRESHOLD_MASK; |
| } |
| |
| /* |
| * Set threshold and disable software override of stage 2 and 3 |
| * shutdowns. |
| */ |
| reg = chip->thresh & SHUTDOWN_CTRL1_THRESHOLD_MASK; |
| rc = qpnp_tm_write(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, ®, 1); |
| if (rc < 0) |
| return rc; |
| |
| /* Enable the thermal alarm PMIC module in always-on mode. */ |
| reg = ALARM_CTRL_FORCE_ENABLE; |
| rc = qpnp_tm_write(chip, QPNP_TM_REG_ALARM_CTRL, ®, 1); |
| |
| return rc; |
| } |
| |
| static int __devinit qpnp_tm_probe(struct spmi_device *spmi) |
| { |
| struct device_node *node; |
| struct resource *res; |
| struct qpnp_tm_chip *chip; |
| struct thermal_zone_device_ops *tz_ops; |
| char *tm_name; |
| u32 default_temperature; |
| int rc = 0; |
| u8 raw_type[2], type, subtype; |
| |
| if (!spmi || !(&spmi->dev) || !spmi->dev.of_node) { |
| dev_err(&spmi->dev, "%s: device tree node not found\n", |
| __func__); |
| return -EINVAL; |
| } |
| |
| node = spmi->dev.of_node; |
| |
| chip = kzalloc(sizeof(struct qpnp_tm_chip), GFP_KERNEL); |
| if (!chip) { |
| dev_err(&spmi->dev, "%s: Can't allocate qpnp_tm_chip\n", |
| __func__); |
| return -ENOMEM; |
| } |
| |
| dev_set_drvdata(&spmi->dev, chip); |
| |
| res = spmi_get_resource(spmi, NULL, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_err(&spmi->dev, "%s: node is missing base address\n", |
| __func__); |
| rc = -EINVAL; |
| goto free_chip; |
| } |
| chip->base_addr = res->start; |
| chip->spmi_dev = spmi; |
| |
| chip->irq = spmi_get_irq(spmi, NULL, 0); |
| if (chip->irq < 0) { |
| rc = chip->irq; |
| dev_err(&spmi->dev, "%s: node is missing irq, rc=%d\n", |
| __func__, rc); |
| goto free_chip; |
| } |
| |
| chip->tm_name = of_get_property(node, "label", NULL); |
| if (chip->tm_name == NULL) { |
| dev_err(&spmi->dev, "%s: node is missing label\n", |
| __func__); |
| rc = -EINVAL; |
| goto free_chip; |
| } |
| |
| tm_name = kstrdup(chip->tm_name, GFP_KERNEL); |
| if (tm_name == NULL) { |
| dev_err(&spmi->dev, "%s: could not allocate memory for label\n", |
| __func__); |
| rc = -ENOMEM; |
| goto free_chip; |
| } |
| chip->tm_name = tm_name; |
| |
| INIT_DELAYED_WORK(&chip->irq_work, qpnp_tm_work); |
| |
| /* These bindings are optional, so it is okay if they are not found. */ |
| chip->thresh = THRESH_MAX + 1; |
| rc = of_property_read_u32(node, "qcom,threshold-set", &chip->thresh); |
| if (!rc && (chip->thresh < THRESH_MIN || chip->thresh > THRESH_MAX)) |
| dev_err(&spmi->dev, "%s: invalid qcom,threshold-set=%u specified\n", |
| __func__, chip->thresh); |
| |
| chip->adc_type = QPNP_TM_ADC_NONE; |
| rc = of_property_read_u32(node, "qcom,channel-num", &chip->adc_channel); |
| if (!rc) { |
| if (chip->adc_channel < 0 || chip->adc_channel >= ADC_MAX_NUM) { |
| dev_err(&spmi->dev, "%s: invalid qcom,channel-num=%d specified\n", |
| __func__, chip->adc_channel); |
| } else { |
| chip->adc_type = QPNP_TM_ADC_QPNP_ADC; |
| chip->vadc_dev = qpnp_get_vadc(&spmi->dev, |
| "temp_alarm"); |
| if (IS_ERR(chip->vadc_dev)) { |
| rc = PTR_ERR(chip->vadc_dev); |
| if (rc != -EPROBE_DEFER) |
| pr_err("vadc property missing\n"); |
| goto err_cancel_work; |
| } |
| } |
| } |
| |
| if (chip->adc_type == QPNP_TM_ADC_QPNP_ADC) |
| tz_ops = &qpnp_thermal_zone_ops_qpnp_adc; |
| else |
| tz_ops = &qpnp_thermal_zone_ops_no_adc; |
| |
| chip->allow_software_override |
| = of_property_read_bool(node, "qcom,allow-override"); |
| |
| default_temperature = DEFAULT_NO_ADC_TEMP; |
| rc = of_property_read_u32(node, "qcom,default-temp", |
| &default_temperature); |
| chip->temperature = default_temperature; |
| |
| rc = qpnp_tm_read(chip, QPNP_TM_REG_TYPE, raw_type, 2); |
| if (rc) { |
| dev_err(&spmi->dev, "%s: could not read type register, rc=%d\n", |
| __func__, rc); |
| goto err_cancel_work; |
| } |
| type = raw_type[0]; |
| subtype = raw_type[1]; |
| |
| if (type != QPNP_TM_TYPE || subtype != QPNP_TM_SUBTYPE) { |
| dev_err(&spmi->dev, "%s: invalid type=%02X or subtype=%02X register value\n", |
| __func__, type, subtype); |
| rc = -ENODEV; |
| goto err_cancel_work; |
| } |
| |
| rc = qpnp_tm_init_reg(chip); |
| if (rc) { |
| dev_err(&spmi->dev, "%s: qpnp_tm_init_reg() failed, rc=%d\n", |
| __func__, rc); |
| goto err_cancel_work; |
| } |
| |
| if (chip->adc_type == QPNP_TM_ADC_NONE) { |
| rc = qpnp_tm_init_temp_no_adc(chip); |
| if (rc) { |
| dev_err(&spmi->dev, "%s: qpnp_tm_init_temp_no_adc() failed, rc=%d\n", |
| __func__, rc); |
| goto err_cancel_work; |
| } |
| } |
| |
| /* Start in HW control; switch to SW control when user changes mode. */ |
| chip->mode = THERMAL_DEVICE_DISABLED; |
| rc = qpnp_tm_shutdown_override(chip, SOFTWARE_OVERRIDE_DISABLED); |
| if (rc) { |
| dev_err(&spmi->dev, "%s: qpnp_tm_shutdown_override() failed, rc=%d\n", |
| __func__, rc); |
| goto err_cancel_work; |
| } |
| |
| chip->tz_dev = thermal_zone_device_register(tm_name, TRIP_NUM, chip, |
| tz_ops, 0, 0, 0, 0); |
| if (chip->tz_dev == NULL) { |
| dev_err(&spmi->dev, "%s: thermal_zone_device_register() failed.\n", |
| __func__); |
| rc = -ENODEV; |
| goto err_cancel_work; |
| } |
| |
| rc = request_irq(chip->irq, qpnp_tm_isr, IRQF_TRIGGER_RISING, tm_name, |
| chip); |
| if (rc < 0) { |
| dev_err(&spmi->dev, "%s: request_irq(%d) failed: %d\n", |
| __func__, chip->irq, rc); |
| goto err_free_tz; |
| } |
| |
| return 0; |
| |
| err_free_tz: |
| thermal_zone_device_unregister(chip->tz_dev); |
| err_cancel_work: |
| cancel_delayed_work_sync(&chip->irq_work); |
| kfree(chip->tm_name); |
| free_chip: |
| dev_set_drvdata(&spmi->dev, NULL); |
| kfree(chip); |
| return rc; |
| } |
| |
| static int __devexit qpnp_tm_remove(struct spmi_device *spmi) |
| { |
| struct qpnp_tm_chip *chip = dev_get_drvdata(&spmi->dev); |
| |
| dev_set_drvdata(&spmi->dev, NULL); |
| thermal_zone_device_unregister(chip->tz_dev); |
| kfree(chip->tm_name); |
| qpnp_tm_shutdown_override(chip, SOFTWARE_OVERRIDE_DISABLED); |
| free_irq(chip->irq, chip); |
| cancel_delayed_work_sync(&chip->irq_work); |
| kfree(chip); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int qpnp_tm_suspend(struct device *dev) |
| { |
| struct qpnp_tm_chip *chip = dev_get_drvdata(dev); |
| |
| /* Clear override bits in suspend to allow hardware control */ |
| qpnp_tm_shutdown_override(chip, SOFTWARE_OVERRIDE_DISABLED); |
| |
| return 0; |
| } |
| |
| static int qpnp_tm_resume(struct device *dev) |
| { |
| struct qpnp_tm_chip *chip = dev_get_drvdata(dev); |
| |
| /* Override hardware actions so software can control */ |
| if (chip->mode == THERMAL_DEVICE_ENABLED) |
| qpnp_tm_shutdown_override(chip, SOFTWARE_OVERRIDE_ENABLED); |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops qpnp_tm_pm_ops = { |
| .suspend = qpnp_tm_suspend, |
| .resume = qpnp_tm_resume, |
| }; |
| |
| #define QPNP_TM_PM_OPS (&qpnp_tm_pm_ops) |
| #else |
| #define QPNP_TM_PM_OPS NULL |
| #endif |
| |
| static struct of_device_id qpnp_tm_match_table[] = { |
| { .compatible = QPNP_TM_DRIVER_NAME, }, |
| {} |
| }; |
| |
| static const struct spmi_device_id qpnp_tm_id[] = { |
| { QPNP_TM_DRIVER_NAME, 0 }, |
| {} |
| }; |
| |
| static struct spmi_driver qpnp_tm_driver = { |
| .driver = { |
| .name = QPNP_TM_DRIVER_NAME, |
| .of_match_table = qpnp_tm_match_table, |
| .owner = THIS_MODULE, |
| .pm = QPNP_TM_PM_OPS, |
| }, |
| .probe = qpnp_tm_probe, |
| .remove = __devexit_p(qpnp_tm_remove), |
| .id_table = qpnp_tm_id, |
| }; |
| |
| int __init qpnp_tm_init(void) |
| { |
| return spmi_driver_register(&qpnp_tm_driver); |
| } |
| |
| static void __exit qpnp_tm_exit(void) |
| { |
| spmi_driver_unregister(&qpnp_tm_driver); |
| } |
| |
| module_init(qpnp_tm_init); |
| module_exit(qpnp_tm_exit); |
| |
| MODULE_DESCRIPTION("QPNP PMIC Temperature Alarm driver"); |
| MODULE_LICENSE("GPL v2"); |