drivers/power/pm8xxx-ccadc.c - kernel/msm - Gitiles

 /* Copyright (c) 2011-2012, Code Aurora Forum. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
  * only version 2 as published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  */
 #define pr_fmt(fmt)	"%s: " fmt, __func__

 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/platform_device.h>
 #include <linux/errno.h>
 #include <linux/mfd/pm8xxx/core.h>
 #include <linux/mfd/pm8xxx/ccadc.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/debugfs.h>
 #include <linux/slab.h>
 #include <linux/delay.h>

 #define CCADC_ANA_PARAM		0x240
 #define CCADC_DIG_PARAM		0x241
 #define CCADC_RSV		0x242
 #define CCADC_DATA0		0x244
 #define CCADC_DATA1		0x245
 #define CCADC_OFFSET_TRIM1	0x34A
 #define CCADC_OFFSET_TRIM0	0x34B
 #define CCADC_FULLSCALE_TRIM1	0x34C
 #define CCADC_FULLSCALE_TRIM0	0x34D

 /* note : TRIM1 is the msb and TRIM0 is the lsb */
 #define ADC_ARB_SECP_CNTRL	0x190
 #define ADC_ARB_SECP_AMUX_CNTRL	0x191
 #define ADC_ARB_SECP_ANA_PARAM	0x192
 #define ADC_ARB_SECP_DIG_PARAM	0x193
 #define ADC_ARB_SECP_RSV	0x194
 #define ADC_ARB_SECP_DATA1	0x195
 #define ADC_ARB_SECP_DATA0	0x196

 #define ADC_ARB_BMS_CNTRL	0x18D

 #define START_CONV_BIT	BIT(7)
 #define EOC_CONV_BIT	BIT(6)
 #define SEL_CCADC_BIT	BIT(1)
 #define EN_ARB_BIT	BIT(0)

 #define CCADC_CALIB_DIG_PARAM	0xE3
 #define CCADC_CALIB_RSV_GND	0x40
 #define CCADC_CALIB_RSV_25MV	0x80
 #define CCADC_CALIB_ANA_PARAM	0x1B
 #define SAMPLE_COUNT		16
 #define ADC_WAIT_COUNT		10

 #define CCADC_MAX_25MV		30000
 #define CCADC_MIN_25MV		20000
 #define CCADC_MAX_0UV		-4000
 #define CCADC_MIN_0UV		-7000

 #define CCADC_INTRINSIC_OFFSET  0xC000

 struct pm8xxx_ccadc_chip {
 	struct device		*dev;
 	struct dentry		*dent;
 	u16			ccadc_offset;
 	int			ccadc_gain_uv;
 	unsigned int		revision;
 	unsigned int		calib_delay_ms;
 	int			eoc_irq;
 	int			r_sense;
 	struct delayed_work	calib_ccadc_work;
 };

 static struct pm8xxx_ccadc_chip *the_chip;

 #ifdef DEBUG
 static s64 microvolt_to_ccadc_reading(struct pm8xxx_ccadc_chip *chip, s64 cc)
 {
 	return div_s64(uv * CCADC_READING_RESOLUTION_D,
 				CCADC_READING_RESOLUTION_N);
 }
 #endif

 static int cc_adjust_for_offset(u16 raw)
 {
 	/* this has the intrinsic offset */
 	return (int)raw - the_chip->ccadc_offset;
 }

 #define GAIN_REFERENCE_UV 25000
 /*
  * gain compensation for ccadc readings - common for vsense based and
  * couloumb counter based readings
  */
 s64 pm8xxx_cc_adjust_for_gain(s64 uv)
 {
 	if (the_chip == NULL || the_chip->ccadc_gain_uv == 0)
 		return uv;

 	return div_s64(uv * GAIN_REFERENCE_UV, the_chip->ccadc_gain_uv);
 }
 EXPORT_SYMBOL(pm8xxx_cc_adjust_for_gain);

 static int pm_ccadc_masked_write(struct pm8xxx_ccadc_chip *chip, u16 addr,
 							u8 mask, u8 val)
 {
 	int rc;
 	u8 reg;

 	rc = pm8xxx_readb(chip->dev->parent, addr, &reg);
 	if (rc) {
 		pr_err("read failed addr = %03X, rc = %d\n", addr, rc);
 		return rc;
 	}
 	reg &= ~mask;
 	reg |= val & mask;
 	rc = pm8xxx_writeb(chip->dev->parent, addr, reg);
 	if (rc) {
 		pr_err("write failed addr = %03X, rc = %d\n", addr, rc);
 		return rc;
 	}
 	return 0;
 }

 #define REG_SBI_CONFIG		0x04F
 #define PAGE3_ENABLE_MASK	0x6
 static int calib_ccadc_enable_trim_access(struct pm8xxx_ccadc_chip *chip,
 								u8 *sbi_config)
 {
 	u8 reg;
 	int rc;

 	rc = pm8xxx_readb(chip->dev->parent, REG_SBI_CONFIG, sbi_config);
 	if (rc) {
 		pr_err("error = %d reading sbi config reg\n", rc);
 		return rc;
 	}

 	reg = *sbi_config | PAGE3_ENABLE_MASK;
 	return pm8xxx_writeb(chip->dev->parent, REG_SBI_CONFIG, reg);
 }

 static int calib_ccadc_restore_trim_access(struct pm8xxx_ccadc_chip *chip,
 							u8 sbi_config)
 {
 	return pm8xxx_writeb(chip->dev->parent, REG_SBI_CONFIG, sbi_config);
 }

 static int calib_ccadc_enable_arbiter(struct pm8xxx_ccadc_chip *chip)
 {
 	int rc;

 	/* enable Arbiter, must be sent twice */
 	rc = pm_ccadc_masked_write(chip, ADC_ARB_SECP_CNTRL,
 			SEL_CCADC_BIT | EN_ARB_BIT, SEL_CCADC_BIT | EN_ARB_BIT);
 	if (rc < 0) {
 		pr_err("error = %d enabling arbiter for offset\n", rc);
 		return rc;
 	}
 	rc = pm_ccadc_masked_write(chip, ADC_ARB_SECP_CNTRL,
 			SEL_CCADC_BIT | EN_ARB_BIT, SEL_CCADC_BIT | EN_ARB_BIT);
 	if (rc < 0) {
 		pr_err("error = %d writing ADC_ARB_SECP_CNTRL\n", rc);
 		return rc;
 	}
 	return 0;
 }

 static int calib_start_conv(struct pm8xxx_ccadc_chip *chip,
 					u16 *result)
 {
 	int rc, i;
 	u8 data_msb, data_lsb, reg;

 	/* Start conversion */
 	rc = pm_ccadc_masked_write(chip, ADC_ARB_SECP_CNTRL,
 					START_CONV_BIT, START_CONV_BIT);
 	if (rc < 0) {
 		pr_err("error = %d starting offset meas\n", rc);
 		return rc;
 	}

 	/* Wait for End of conversion */
 	for (i = 0; i < ADC_WAIT_COUNT; i++) {
 		rc = pm8xxx_readb(chip->dev->parent,
 					ADC_ARB_SECP_CNTRL, &reg);
 		if (rc < 0) {
 			pr_err("error = %d read eoc for offset\n", rc);
 			return rc;
 		}
 		if ((reg & (START_CONV_BIT | EOC_CONV_BIT)) != EOC_CONV_BIT)
 			msleep(20);
 		else
 			break;
 	}
 	if (i == ADC_WAIT_COUNT) {
 		pr_err("waited too long for offset eoc returning -EBUSY\n");
 		return -EBUSY;
 	}

 	rc = pm8xxx_readb(chip->dev->parent, ADC_ARB_SECP_DATA0, &data_lsb);
 	if (rc < 0) {
 		pr_err("error = %d reading offset lsb\n", rc);
 		return rc;
 	}

 	rc = pm8xxx_readb(chip->dev->parent, ADC_ARB_SECP_DATA1, &data_msb);
 	if (rc < 0) {
 		pr_err("error = %d reading offset msb\n", rc);
 		return rc;
 	}

 	*result = (data_msb << 8) | data_lsb;
 	return 0;
 }

 static int calib_ccadc_read_trim(struct pm8xxx_ccadc_chip *chip,
 					int addr, u8 *data_msb, u8 *data_lsb)
 {
 	int rc;
 	u8 sbi_config;

 	calib_ccadc_enable_trim_access(chip, &sbi_config);
 	rc = pm8xxx_readb(chip->dev->parent, addr, data_msb);
 	if (rc < 0) {
 		pr_err("error = %d read msb\n", rc);
 		return rc;
 	}
 	rc = pm8xxx_readb(chip->dev->parent, addr + 1, data_lsb);
 	if (rc < 0) {
 		pr_err("error = %d read lsb\n", rc);
 		return rc;
 	}
 	calib_ccadc_restore_trim_access(chip, sbi_config);
 	return 0;
 }

 static void calib_ccadc_read_offset_and_gain(struct pm8xxx_ccadc_chip *chip,
 						int *gain, u16 *offset)
 {
 	u8 data_msb;
 	u8 data_lsb;
 	int rc;

 	rc = calib_ccadc_read_trim(chip, CCADC_FULLSCALE_TRIM1,
 						&data_msb, &data_lsb);
 	*gain = (data_msb << 8) | data_lsb;

 	rc = calib_ccadc_read_trim(chip, CCADC_OFFSET_TRIM1,
 						&data_msb, &data_lsb);
 	*offset = (data_msb << 8) | data_lsb;

 	pr_debug("raw gain trim = 0x%x offset trim =0x%x\n", *gain, *offset);
 	*gain = pm8xxx_ccadc_reading_to_microvolt(chip->revision,
 							(s64)*gain - *offset);
 	pr_debug("gain uv = %duV offset=0x%x\n", *gain, *offset);
 }

 #define CCADC_PROGRAM_TRIM_COUNT	2
 #define ADC_ARB_BMS_CNTRL_CCADC_SHIFT	4
 #define ADC_ARB_BMS_CNTRL_CONV_MASK	0x03
 #define BMS_CONV_IN_PROGRESS		0x2

 static int calib_ccadc_program_trim(struct pm8xxx_ccadc_chip *chip,
 					int addr, u8 data_msb, u8 data_lsb,
 					int wait)
 {
 	int i, rc, loop;
 	u8 cntrl, sbi_config;
 	bool in_progress = 0;

 	loop = wait ? CCADC_PROGRAM_TRIM_COUNT : 0;

 	calib_ccadc_enable_trim_access(chip, &sbi_config);

 	for (i = 0; i < loop; i++) {
 		rc = pm8xxx_readb(chip->dev->parent, ADC_ARB_BMS_CNTRL, &cntrl);
 		if (rc < 0) {
 			pr_err("error = %d reading ADC_ARB_BMS_CNTRL\n", rc);
 			return rc;
 		}

 		/* break if a ccadc conversion is not happening */
 		in_progress = (((cntrl >> ADC_ARB_BMS_CNTRL_CCADC_SHIFT)
 			& ADC_ARB_BMS_CNTRL_CONV_MASK) == BMS_CONV_IN_PROGRESS);

 		if (!in_progress)
 			break;
 	}

 	if (in_progress) {
 		pr_debug("conv in progress cannot write trim,returing EBUSY\n");
 		return -EBUSY;
 	}

 	rc = pm8xxx_writeb(chip->dev->parent, addr, data_msb);
 	if (rc < 0) {
 		pr_err("error = %d write msb = 0x%x\n", rc, data_msb);
 		return rc;
 	}
 	rc = pm8xxx_writeb(chip->dev->parent, addr + 1, data_lsb);
 	if (rc < 0) {
 		pr_err("error = %d write lsb = 0x%x\n", rc, data_lsb);
 		return rc;
 	}
 	calib_ccadc_restore_trim_access(chip, sbi_config);
 	return 0;
 }

 void pm8xxx_calib_ccadc(void)
 {
 	u8 data_msb, data_lsb, sec_cntrl;
 	int result_offset, result_gain;
 	u16 result;
 	int i, rc;

 	if (!the_chip) {
 		pr_err("chip not initialized\n");
 		return;
 	}

 	rc = pm8xxx_readb(the_chip->dev->parent,
 					ADC_ARB_SECP_CNTRL, &sec_cntrl);
 	if (rc < 0) {
 		pr_err("error = %d reading ADC_ARB_SECP_CNTRL\n", rc);
 		return;
 	}

 	rc = calib_ccadc_enable_arbiter(the_chip);
 	if (rc < 0) {
 		pr_err("error = %d enabling arbiter for offset\n", rc);
 		goto bail;
 	}

 	/*
 	 * Set decimation ratio to 4k, lower ratio may be used in order to speed
 	 * up, pending verification through bench
 	 */
 	rc = pm8xxx_writeb(the_chip->dev->parent, ADC_ARB_SECP_DIG_PARAM,
 							CCADC_CALIB_DIG_PARAM);
 	if (rc < 0) {
 		pr_err("error = %d writing ADC_ARB_SECP_DIG_PARAM\n", rc);
 		goto bail;
 	}

 	result_offset = 0;
 	for (i = 0; i < SAMPLE_COUNT; i++) {
 		/* Short analog inputs to CCADC internally to ground */
 		rc = pm8xxx_writeb(the_chip->dev->parent, ADC_ARB_SECP_RSV,
 							CCADC_CALIB_RSV_GND);
 		if (rc < 0) {
 			pr_err("error = %d selecting gnd voltage\n", rc);
 			goto bail;
 		}

 		/* Enable CCADC */
 		rc = pm8xxx_writeb(the_chip->dev->parent,
 				ADC_ARB_SECP_ANA_PARAM, CCADC_CALIB_ANA_PARAM);
 		if (rc < 0) {
 			pr_err("error = %d enabling ccadc\n", rc);
 			goto bail;
 		}

 		rc = calib_start_conv(the_chip, &result);
 		if (rc < 0) {
 			pr_err("error = %d for zero volt measurement\n", rc);
 			goto bail;
 		}

 		result_offset += result;
 	}

 	result_offset = result_offset / SAMPLE_COUNT;


 	pr_debug("offset result_offset = 0x%x, voltage = %llduV\n",
 			result_offset,
 			pm8xxx_ccadc_reading_to_microvolt(the_chip->revision,
 			((s64)result_offset - CCADC_INTRINSIC_OFFSET)));

 	the_chip->ccadc_offset = result_offset;
 	data_msb = the_chip->ccadc_offset >> 8;
 	data_lsb = the_chip->ccadc_offset;

 	rc = calib_ccadc_program_trim(the_chip, CCADC_OFFSET_TRIM1,
 						data_msb, data_lsb, 1);
 	if (rc) {
 		pr_debug("error = %d programming offset trim 0x%02x 0x%02x\n",
 					rc, data_msb, data_lsb);
 		/* enable the interrupt and write it when it fires */
 		enable_irq(the_chip->eoc_irq);
 	}

 	rc = calib_ccadc_enable_arbiter(the_chip);
 	if (rc < 0) {
 		pr_err("error = %d enabling arbiter for gain\n", rc);
 		goto bail;
 	}

 	/*
 	 * Set decimation ratio to 4k, lower ratio may be used in order to speed
 	 * up, pending verification through bench
 	 */
 	rc = pm8xxx_writeb(the_chip->dev->parent, ADC_ARB_SECP_DIG_PARAM,
 							CCADC_CALIB_DIG_PARAM);
 	if (rc < 0) {
 		pr_err("error = %d enabling decimation ration for gain\n", rc);
 		goto bail;
 	}

 	result_gain = 0;
 	for (i = 0; i < SAMPLE_COUNT; i++) {
 		rc = pm8xxx_writeb(the_chip->dev->parent,
 					ADC_ARB_SECP_RSV, CCADC_CALIB_RSV_25MV);
 		if (rc < 0) {
 			pr_err("error = %d selecting 25mV for gain\n", rc);
 			goto bail;
 		}

 		/* Enable CCADC */
 		rc = pm8xxx_writeb(the_chip->dev->parent,
 			ADC_ARB_SECP_ANA_PARAM, CCADC_CALIB_ANA_PARAM);
 		if (rc < 0) {
 			pr_err("error = %d enabling ccadc\n", rc);
 			goto bail;
 		}

 		rc = calib_start_conv(the_chip, &result);
 		if (rc < 0) {
 			pr_err("error = %d for adc reading 25mV\n", rc);
 			goto bail;
 		}

 		result_gain += result;
 	}
 	result_gain = result_gain / SAMPLE_COUNT;

 	/*
 	 * result_offset includes INTRINSIC OFFSET
 	 * the_chip->ccadc_gain_uv will be the actual voltage
 	 * measured for 25000UV
 	 */
 	the_chip->ccadc_gain_uv = pm8xxx_ccadc_reading_to_microvolt(
 				the_chip->revision,
 				((s64)result_gain - result_offset));

 	pr_debug("gain result_gain = 0x%x, voltage = %d microVolts\n",
 					result_gain, the_chip->ccadc_gain_uv);

 	data_msb = result_gain >> 8;
 	data_lsb = result_gain;
 	rc = calib_ccadc_program_trim(the_chip, CCADC_FULLSCALE_TRIM1,
 						data_msb, data_lsb, 0);
 	if (rc)
 		pr_debug("error = %d programming gain trim\n", rc);
 bail:
 	pm8xxx_writeb(the_chip->dev->parent, ADC_ARB_SECP_CNTRL, sec_cntrl);
 }
 EXPORT_SYMBOL(pm8xxx_calib_ccadc);

 static void calibrate_ccadc_work(struct work_struct *work)
 {
 	struct pm8xxx_ccadc_chip *chip = container_of(work,
 			struct pm8xxx_ccadc_chip, calib_ccadc_work.work);

 	pm8xxx_calib_ccadc();
 	schedule_delayed_work(&chip->calib_ccadc_work,
 			round_jiffies_relative(msecs_to_jiffies
 			(chip->calib_delay_ms)));
 }

 static irqreturn_t pm8921_bms_ccadc_eoc_handler(int irq, void *data)
 {
 	u8 data_msb, data_lsb;
 	struct pm8xxx_ccadc_chip *chip = data;
 	int rc;

 	if (!the_chip)
 		goto out;

 	pr_debug("irq = %d triggered\n", irq);
 	data_msb = chip->ccadc_offset >> 8;
 	data_lsb = chip->ccadc_offset;

 	rc = calib_ccadc_program_trim(chip, CCADC_OFFSET_TRIM1,
 						data_msb, data_lsb, 0);
 	disable_irq_nosync(chip->eoc_irq);

 out:
 	return IRQ_HANDLED;
 }

 #define CCADC_IBAT_DIG_PARAM	0xA3
 #define CCADC_IBAT_RSV		0x10
 #define CCADC_IBAT_ANA_PARAM	0x1A
 static int ccadc_get_rsense_voltage(int *voltage_uv)
 {
 	u16 raw;
 	int result;
 	int rc = 0;

 	rc = calib_ccadc_enable_arbiter(the_chip);
 	if (rc < 0) {
 		pr_err("error = %d enabling arbiter for offset\n", rc);
 		return rc;
 	}

 	rc = pm8xxx_writeb(the_chip->dev->parent, ADC_ARB_SECP_DIG_PARAM,
 							CCADC_IBAT_DIG_PARAM);
 	if (rc < 0) {
 		pr_err("error = %d writing ADC_ARB_SECP_DIG_PARAM\n", rc);
 		return rc;
 	}

 	rc = pm8xxx_writeb(the_chip->dev->parent, ADC_ARB_SECP_RSV,
 						CCADC_IBAT_RSV);
 	if (rc < 0) {
 		pr_err("error = %d selecting rsense\n", rc);
 		return rc;
 	}

 	rc = pm8xxx_writeb(the_chip->dev->parent,
 			ADC_ARB_SECP_ANA_PARAM, CCADC_IBAT_ANA_PARAM);
 	if (rc < 0) {
 		pr_err("error = %d enabling ccadc\n", rc);
 		return rc;
 	}

 	rc = calib_start_conv(the_chip, &raw);
 	if (rc < 0) {
 		pr_err("error = %d for zero volt measurement\n", rc);
 		return rc;
 	}

 	pr_debug("Vsense raw = 0x%x\n", raw);
 	result = cc_adjust_for_offset(raw);
 	pr_debug("Vsense after offset raw = 0x%x offset=0x%x\n",
 					result,
 					the_chip->ccadc_offset);
 	*voltage_uv = pm8xxx_ccadc_reading_to_microvolt(the_chip->revision,
 			((s64)result));
 	pr_debug("Vsense before gain of %d = %d uV\n", the_chip->ccadc_gain_uv,
 					*voltage_uv);
 	*voltage_uv = pm8xxx_cc_adjust_for_gain(*voltage_uv);

 	pr_debug("Vsense = %d uV\n", *voltage_uv);
 	return 0;
 }

 int pm8xxx_ccadc_get_battery_current(int *bat_current_ua)
 {
 	int voltage_uv = 0, rc;

 	rc = ccadc_get_rsense_voltage(&voltage_uv);
 	if (rc) {
 		pr_err("cant get voltage across rsense rc = %d\n", rc);
 		return rc;
 	}

 	*bat_current_ua = voltage_uv * 1000/the_chip->r_sense;
 	/*
 	 * ccadc reads +ve current when the battery is charging
 	 * We need to return -ve if the battery is charging
 	 */
 	*bat_current_ua = -1 * (*bat_current_ua);
 	pr_debug("bat current = %d ma\n", *bat_current_ua);
 	return 0;
 }
 EXPORT_SYMBOL(pm8xxx_ccadc_get_battery_current);

 static int get_reg(void *data, u64 * val)
 {
 	int addr = (int)data;
 	int ret;
 	u8 temp;

 	ret = pm8xxx_readb(the_chip->dev->parent, addr, &temp);
 	if (ret) {
 		pr_err("pm8xxx_readb to %x value = %d errored = %d\n",
 			addr, temp, ret);
 		return -EAGAIN;
 	}
 	*val = temp;
 	return 0;
 }

 static int set_reg(void *data, u64 val)
 {
 	int addr = (int)data;
 	int ret;
 	u8 temp;

 	temp = (u8) val;
 	ret = pm8xxx_writeb(the_chip->dev->parent, addr, temp);
 	if (ret) {
 		pr_err("pm8xxx_writeb to %x value = %d errored = %d\n",
 			addr, temp, ret);
 		return -EAGAIN;
 	}
 	return 0;
 }
 DEFINE_SIMPLE_ATTRIBUTE(reg_fops, get_reg, set_reg, "0x%02llx\n");

 static int get_calc(void *data, u64 * val)
 {
 	int ibat, rc;

 	rc = pm8xxx_ccadc_get_battery_current(&ibat);
 	*val = ibat;
 	return rc;
 }
 DEFINE_SIMPLE_ATTRIBUTE(calc_fops, get_calc, NULL, "%lld\n");

 static void create_debugfs_entries(struct pm8xxx_ccadc_chip *chip)
 {
 	chip->dent = debugfs_create_dir("pm8xxx-ccadc", NULL);

 	if (IS_ERR(chip->dent)) {
 		pr_err("ccadc couldnt create debugfs dir\n");
 		return;
 	}

 	debugfs_create_file("CCADC_ANA_PARAM", 0644, chip->dent,
 			(void *)CCADC_ANA_PARAM, &reg_fops);
 	debugfs_create_file("CCADC_DIG_PARAM", 0644, chip->dent,
 			(void *)CCADC_DIG_PARAM, &reg_fops);
 	debugfs_create_file("CCADC_RSV", 0644, chip->dent,
 			(void *)CCADC_RSV, &reg_fops);
 	debugfs_create_file("CCADC_DATA0", 0644, chip->dent,
 			(void *)CCADC_DATA0, &reg_fops);
 	debugfs_create_file("CCADC_DATA1", 0644, chip->dent,
 			(void *)CCADC_DATA1, &reg_fops);
 	debugfs_create_file("CCADC_OFFSET_TRIM1", 0644, chip->dent,
 			(void *)CCADC_OFFSET_TRIM1, &reg_fops);
 	debugfs_create_file("CCADC_OFFSET_TRIM0", 0644, chip->dent,
 			(void *)CCADC_OFFSET_TRIM0, &reg_fops);
 	debugfs_create_file("CCADC_FULLSCALE_TRIM1", 0644, chip->dent,
 			(void *)CCADC_FULLSCALE_TRIM1, &reg_fops);
 	debugfs_create_file("CCADC_FULLSCALE_TRIM0", 0644, chip->dent,
 			(void *)CCADC_FULLSCALE_TRIM0, &reg_fops);

 	debugfs_create_file("show_ibatt", 0644, chip->dent,
 				(void *)0, &calc_fops);
 }

 static int __devinit pm8xxx_ccadc_probe(struct platform_device *pdev)
 {
 	int rc = 0;
 	struct pm8xxx_ccadc_chip *chip;
 	struct resource *res;
 	const struct pm8xxx_ccadc_platform_data *pdata
 				= pdev->dev.platform_data;

 	if (!pdata) {
 		pr_err("missing platform data\n");
 		return -EINVAL;
 	}
 	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
 			"PM8921_BMS_CCADC_EOC");
 	if  (!res) {
 		pr_err("failed to get irq\n");
 		return -EINVAL;
 	}

 	chip = kzalloc(sizeof(struct pm8xxx_ccadc_chip), GFP_KERNEL);
 	if (!chip) {
 		pr_err("Cannot allocate pm_bms_chip\n");
 		return -ENOMEM;
 	}
 	chip->dev = &pdev->dev;
 	chip->revision = pm8xxx_get_revision(chip->dev->parent);
 	chip->eoc_irq = res->start;
 	chip->r_sense = pdata->r_sense;
 	chip->calib_delay_ms = pdata->calib_delay_ms;

 	calib_ccadc_read_offset_and_gain(chip,
 					&chip->ccadc_gain_uv,
 					&chip->ccadc_offset);
 	rc = request_irq(chip->eoc_irq,
 			pm8921_bms_ccadc_eoc_handler, IRQF_TRIGGER_RISING,
 			"bms_eoc_ccadc", chip);
 	if (rc) {
 		pr_err("failed to request %d irq rc= %d\n", chip->eoc_irq, rc);
 		goto free_chip;
 	}

 	disable_irq_nosync(chip->eoc_irq);

 	platform_set_drvdata(pdev, chip);
 	the_chip = chip;
 	INIT_DELAYED_WORK(&chip->calib_ccadc_work, calibrate_ccadc_work);
 	schedule_delayed_work(&chip->calib_ccadc_work, 0);

 	create_debugfs_entries(chip);

 	return 0;

 free_chip:
 	kfree(chip);
 	return rc;
 }

 static int __devexit pm8xxx_ccadc_remove(struct platform_device *pdev)
 {
 	struct pm8xxx_ccadc_chip *chip = platform_get_drvdata(pdev);

 	debugfs_remove_recursive(chip->dent);
 	the_chip = NULL;
 	kfree(chip);
 	return 0;
 }

 static struct platform_driver pm8xxx_ccadc_driver = {
 	.probe	= pm8xxx_ccadc_probe,
 	.remove	= __devexit_p(pm8xxx_ccadc_remove),
 	.driver	= {
 		.name	= PM8XXX_CCADC_DEV_NAME,
 		.owner	= THIS_MODULE,
 	},
 };

 static int __init pm8xxx_ccadc_init(void)
 {
 	return platform_driver_register(&pm8xxx_ccadc_driver);
 }

 static void __exit pm8xxx_ccadc_exit(void)
 {
 	platform_driver_unregister(&pm8xxx_ccadc_driver);
 }

 module_init(pm8xxx_ccadc_init);
 module_exit(pm8xxx_ccadc_exit);

 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("PMIC8XXX ccadc driver");
 MODULE_VERSION("1.0");
 MODULE_ALIAS("platform:" PM8XXX_CCADC_DEV_NAME);
	/* Copyright (c) 2011-2012, Code Aurora Forum. All rights reserved.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 and
	* only version 2 as published by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	*/
	#define pr_fmt(fmt) "%s: " fmt, __func__

	#include <linux/module.h>
	#include <linux/moduleparam.h>
	#include <linux/platform_device.h>
	#include <linux/errno.h>
	#include <linux/mfd/pm8xxx/core.h>
	#include <linux/mfd/pm8xxx/ccadc.h>
	#include <linux/interrupt.h>
	#include <linux/ioport.h>
	#include <linux/debugfs.h>
	#include <linux/slab.h>
	#include <linux/delay.h>

	#define CCADC_ANA_PARAM 0x240
	#define CCADC_DIG_PARAM 0x241
	#define CCADC_RSV 0x242
	#define CCADC_DATA0 0x244
	#define CCADC_DATA1 0x245
	#define CCADC_OFFSET_TRIM1 0x34A
	#define CCADC_OFFSET_TRIM0 0x34B
	#define CCADC_FULLSCALE_TRIM1 0x34C
	#define CCADC_FULLSCALE_TRIM0 0x34D

	/* note : TRIM1 is the msb and TRIM0 is the lsb */
	#define ADC_ARB_SECP_CNTRL 0x190
	#define ADC_ARB_SECP_AMUX_CNTRL 0x191
	#define ADC_ARB_SECP_ANA_PARAM 0x192
	#define ADC_ARB_SECP_DIG_PARAM 0x193
	#define ADC_ARB_SECP_RSV 0x194
	#define ADC_ARB_SECP_DATA1 0x195
	#define ADC_ARB_SECP_DATA0 0x196

	#define ADC_ARB_BMS_CNTRL 0x18D

	#define START_CONV_BIT BIT(7)
	#define EOC_CONV_BIT BIT(6)
	#define SEL_CCADC_BIT BIT(1)
	#define EN_ARB_BIT BIT(0)

	#define CCADC_CALIB_DIG_PARAM 0xE3
	#define CCADC_CALIB_RSV_GND 0x40
	#define CCADC_CALIB_RSV_25MV 0x80
	#define CCADC_CALIB_ANA_PARAM 0x1B
	#define SAMPLE_COUNT 16
	#define ADC_WAIT_COUNT 10

	#define CCADC_MAX_25MV 30000
	#define CCADC_MIN_25MV 20000
	#define CCADC_MAX_0UV -4000
	#define CCADC_MIN_0UV -7000

	#define CCADC_INTRINSIC_OFFSET 0xC000

	struct pm8xxx_ccadc_chip {
	struct device *dev;
	struct dentry *dent;
	u16 ccadc_offset;
	int ccadc_gain_uv;
	unsigned int revision;
	unsigned int calib_delay_ms;
	int eoc_irq;
	int r_sense;
	struct delayed_work calib_ccadc_work;
	};

	static struct pm8xxx_ccadc_chip *the_chip;

	#ifdef DEBUG
	static s64 microvolt_to_ccadc_reading(struct pm8xxx_ccadc_chip *chip, s64 cc)
	{
	return div_s64(uv * CCADC_READING_RESOLUTION_D,
	CCADC_READING_RESOLUTION_N);
	}
	#endif

	static int cc_adjust_for_offset(u16 raw)
	{
	/* this has the intrinsic offset */
	return (int)raw - the_chip->ccadc_offset;
	}

	#define GAIN_REFERENCE_UV 25000
	/*
	* gain compensation for ccadc readings - common for vsense based and
	* couloumb counter based readings
	*/
	s64 pm8xxx_cc_adjust_for_gain(s64 uv)
	{
	if (the_chip == NULL \|\| the_chip->ccadc_gain_uv == 0)
	return uv;

	return div_s64(uv * GAIN_REFERENCE_UV, the_chip->ccadc_gain_uv);
	}
	EXPORT_SYMBOL(pm8xxx_cc_adjust_for_gain);

	static int pm_ccadc_masked_write(struct pm8xxx_ccadc_chip *chip, u16 addr,
	u8 mask, u8 val)
	{
	int rc;
	u8 reg;

	rc = pm8xxx_readb(chip->dev->parent, addr, &reg);
	if (rc) {
	pr_err("read failed addr = %03X, rc = %d\n", addr, rc);
	return rc;
	}
	reg &= ~mask;
	reg \|= val & mask;
	rc = pm8xxx_writeb(chip->dev->parent, addr, reg);
	if (rc) {
	pr_err("write failed addr = %03X, rc = %d\n", addr, rc);
	return rc;
	}
	return 0;
	}

	#define REG_SBI_CONFIG 0x04F
	#define PAGE3_ENABLE_MASK 0x6
	static int calib_ccadc_enable_trim_access(struct pm8xxx_ccadc_chip *chip,
	u8 *sbi_config)
	{
	u8 reg;
	int rc;

	rc = pm8xxx_readb(chip->dev->parent, REG_SBI_CONFIG, sbi_config);
	if (rc) {
	pr_err("error = %d reading sbi config reg\n", rc);
	return rc;
	}

	reg = *sbi_config \| PAGE3_ENABLE_MASK;
	return pm8xxx_writeb(chip->dev->parent, REG_SBI_CONFIG, reg);
	}

	static int calib_ccadc_restore_trim_access(struct pm8xxx_ccadc_chip *chip,
	u8 sbi_config)
	{
	return pm8xxx_writeb(chip->dev->parent, REG_SBI_CONFIG, sbi_config);
	}

	static int calib_ccadc_enable_arbiter(struct pm8xxx_ccadc_chip *chip)
	{
	int rc;

	/* enable Arbiter, must be sent twice */
	rc = pm_ccadc_masked_write(chip, ADC_ARB_SECP_CNTRL,
	SEL_CCADC_BIT \| EN_ARB_BIT, SEL_CCADC_BIT \| EN_ARB_BIT);
	if (rc < 0) {
	pr_err("error = %d enabling arbiter for offset\n", rc);
	return rc;
	}
	rc = pm_ccadc_masked_write(chip, ADC_ARB_SECP_CNTRL,
	SEL_CCADC_BIT \| EN_ARB_BIT, SEL_CCADC_BIT \| EN_ARB_BIT);
	if (rc < 0) {
	pr_err("error = %d writing ADC_ARB_SECP_CNTRL\n", rc);
	return rc;
	}
	return 0;
	}

	static int calib_start_conv(struct pm8xxx_ccadc_chip *chip,
	u16 *result)
	{
	int rc, i;
	u8 data_msb, data_lsb, reg;

	/* Start conversion */
	rc = pm_ccadc_masked_write(chip, ADC_ARB_SECP_CNTRL,
	START_CONV_BIT, START_CONV_BIT);
	if (rc < 0) {
	pr_err("error = %d starting offset meas\n", rc);
	return rc;
	}

	/* Wait for End of conversion */
	for (i = 0; i < ADC_WAIT_COUNT; i++) {
	rc = pm8xxx_readb(chip->dev->parent,
	ADC_ARB_SECP_CNTRL, &reg);
	if (rc < 0) {
	pr_err("error = %d read eoc for offset\n", rc);
	return rc;
	}
	if ((reg & (START_CONV_BIT \| EOC_CONV_BIT)) != EOC_CONV_BIT)
	msleep(20);
	else
	break;
	}
	if (i == ADC_WAIT_COUNT) {
	pr_err("waited too long for offset eoc returning -EBUSY\n");
	return -EBUSY;
	}

	rc = pm8xxx_readb(chip->dev->parent, ADC_ARB_SECP_DATA0, &data_lsb);
	if (rc < 0) {
	pr_err("error = %d reading offset lsb\n", rc);
	return rc;
	}

	rc = pm8xxx_readb(chip->dev->parent, ADC_ARB_SECP_DATA1, &data_msb);
	if (rc < 0) {
	pr_err("error = %d reading offset msb\n", rc);
	return rc;
	}

	*result = (data_msb << 8) \| data_lsb;
	return 0;
	}

	static int calib_ccadc_read_trim(struct pm8xxx_ccadc_chip *chip,
	int addr, u8 data_msb, u8 data_lsb)
	{
	int rc;
	u8 sbi_config;

	calib_ccadc_enable_trim_access(chip, &sbi_config);
	rc = pm8xxx_readb(chip->dev->parent, addr, data_msb);
	if (rc < 0) {
	pr_err("error = %d read msb\n", rc);
	return rc;
	}
	rc = pm8xxx_readb(chip->dev->parent, addr + 1, data_lsb);
	if (rc < 0) {
	pr_err("error = %d read lsb\n", rc);
	return rc;
	}
	calib_ccadc_restore_trim_access(chip, sbi_config);
	return 0;
	}

	static void calib_ccadc_read_offset_and_gain(struct pm8xxx_ccadc_chip *chip,
	int gain, u16 offset)
	{
	u8 data_msb;
	u8 data_lsb;
	int rc;

	rc = calib_ccadc_read_trim(chip, CCADC_FULLSCALE_TRIM1,
	&data_msb, &data_lsb);
	*gain = (data_msb << 8) \| data_lsb;

	rc = calib_ccadc_read_trim(chip, CCADC_OFFSET_TRIM1,
	&data_msb, &data_lsb);
	*offset = (data_msb << 8) \| data_lsb;

	pr_debug("raw gain trim = 0x%x offset trim =0x%x\n", gain, offset);
	*gain = pm8xxx_ccadc_reading_to_microvolt(chip->revision,
	(s64)gain - offset);
	pr_debug("gain uv = %duV offset=0x%x\n", gain, offset);
	}

	#define CCADC_PROGRAM_TRIM_COUNT 2
	#define ADC_ARB_BMS_CNTRL_CCADC_SHIFT 4
	#define ADC_ARB_BMS_CNTRL_CONV_MASK 0x03
	#define BMS_CONV_IN_PROGRESS 0x2

	static int calib_ccadc_program_trim(struct pm8xxx_ccadc_chip *chip,
	int addr, u8 data_msb, u8 data_lsb,
	int wait)
	{
	int i, rc, loop;
	u8 cntrl, sbi_config;
	bool in_progress = 0;

	loop = wait ? CCADC_PROGRAM_TRIM_COUNT : 0;

	calib_ccadc_enable_trim_access(chip, &sbi_config);

	for (i = 0; i < loop; i++) {
	rc = pm8xxx_readb(chip->dev->parent, ADC_ARB_BMS_CNTRL, &cntrl);
	if (rc < 0) {
	pr_err("error = %d reading ADC_ARB_BMS_CNTRL\n", rc);
	return rc;
	}

	/* break if a ccadc conversion is not happening */
	in_progress = (((cntrl >> ADC_ARB_BMS_CNTRL_CCADC_SHIFT)
	& ADC_ARB_BMS_CNTRL_CONV_MASK) == BMS_CONV_IN_PROGRESS);

	if (!in_progress)
	break;
	}

	if (in_progress) {
	pr_debug("conv in progress cannot write trim,returing EBUSY\n");
	return -EBUSY;
	}

	rc = pm8xxx_writeb(chip->dev->parent, addr, data_msb);
	if (rc < 0) {
	pr_err("error = %d write msb = 0x%x\n", rc, data_msb);
	return rc;
	}
	rc = pm8xxx_writeb(chip->dev->parent, addr + 1, data_lsb);
	if (rc < 0) {
	pr_err("error = %d write lsb = 0x%x\n", rc, data_lsb);
	return rc;
	}
	calib_ccadc_restore_trim_access(chip, sbi_config);
	return 0;
	}

	void pm8xxx_calib_ccadc(void)
	{
	u8 data_msb, data_lsb, sec_cntrl;
	int result_offset, result_gain;
	u16 result;
	int i, rc;

	if (!the_chip) {
	pr_err("chip not initialized\n");
	return;
	}

	rc = pm8xxx_readb(the_chip->dev->parent,
	ADC_ARB_SECP_CNTRL, &sec_cntrl);
	if (rc < 0) {
	pr_err("error = %d reading ADC_ARB_SECP_CNTRL\n", rc);
	return;
	}

	rc = calib_ccadc_enable_arbiter(the_chip);
	if (rc < 0) {
	pr_err("error = %d enabling arbiter for offset\n", rc);
	goto bail;
	}

	/*
	* Set decimation ratio to 4k, lower ratio may be used in order to speed
	* up, pending verification through bench
	*/
	rc = pm8xxx_writeb(the_chip->dev->parent, ADC_ARB_SECP_DIG_PARAM,
	CCADC_CALIB_DIG_PARAM);
	if (rc < 0) {
	pr_err("error = %d writing ADC_ARB_SECP_DIG_PARAM\n", rc);
	goto bail;
	}

	result_offset = 0;
	for (i = 0; i < SAMPLE_COUNT; i++) {
	/* Short analog inputs to CCADC internally to ground */
	rc = pm8xxx_writeb(the_chip->dev->parent, ADC_ARB_SECP_RSV,
	CCADC_CALIB_RSV_GND);
	if (rc < 0) {
	pr_err("error = %d selecting gnd voltage\n", rc);
	goto bail;
	}

	/* Enable CCADC */
	rc = pm8xxx_writeb(the_chip->dev->parent,
	ADC_ARB_SECP_ANA_PARAM, CCADC_CALIB_ANA_PARAM);
	if (rc < 0) {
	pr_err("error = %d enabling ccadc\n", rc);
	goto bail;
	}

	rc = calib_start_conv(the_chip, &result);
	if (rc < 0) {
	pr_err("error = %d for zero volt measurement\n", rc);
	goto bail;
	}

	result_offset += result;
	}

	result_offset = result_offset / SAMPLE_COUNT;


	pr_debug("offset result_offset = 0x%x, voltage = %llduV\n",
	result_offset,
	pm8xxx_ccadc_reading_to_microvolt(the_chip->revision,
	((s64)result_offset - CCADC_INTRINSIC_OFFSET)));

	the_chip->ccadc_offset = result_offset;
	data_msb = the_chip->ccadc_offset >> 8;
	data_lsb = the_chip->ccadc_offset;

	rc = calib_ccadc_program_trim(the_chip, CCADC_OFFSET_TRIM1,
	data_msb, data_lsb, 1);
	if (rc) {
	pr_debug("error = %d programming offset trim 0x%02x 0x%02x\n",
	rc, data_msb, data_lsb);
	/* enable the interrupt and write it when it fires */
	enable_irq(the_chip->eoc_irq);
	}

	rc = calib_ccadc_enable_arbiter(the_chip);
	if (rc < 0) {
	pr_err("error = %d enabling arbiter for gain\n", rc);
	goto bail;
	}

	/*
	* Set decimation ratio to 4k, lower ratio may be used in order to speed
	* up, pending verification through bench
	*/
	rc = pm8xxx_writeb(the_chip->dev->parent, ADC_ARB_SECP_DIG_PARAM,
	CCADC_CALIB_DIG_PARAM);
	if (rc < 0) {
	pr_err("error = %d enabling decimation ration for gain\n", rc);
	goto bail;
	}

	result_gain = 0;
	for (i = 0; i < SAMPLE_COUNT; i++) {
	rc = pm8xxx_writeb(the_chip->dev->parent,
	ADC_ARB_SECP_RSV, CCADC_CALIB_RSV_25MV);
	if (rc < 0) {
	pr_err("error = %d selecting 25mV for gain\n", rc);
	goto bail;
	}

	/* Enable CCADC */
	rc = pm8xxx_writeb(the_chip->dev->parent,
	ADC_ARB_SECP_ANA_PARAM, CCADC_CALIB_ANA_PARAM);
	if (rc < 0) {
	pr_err("error = %d enabling ccadc\n", rc);
	goto bail;
	}

	rc = calib_start_conv(the_chip, &result);
	if (rc < 0) {
	pr_err("error = %d for adc reading 25mV\n", rc);
	goto bail;
	}

	result_gain += result;
	}
	result_gain = result_gain / SAMPLE_COUNT;

	/*
	* result_offset includes INTRINSIC OFFSET
	* the_chip->ccadc_gain_uv will be the actual voltage
	* measured for 25000UV
	*/
	the_chip->ccadc_gain_uv = pm8xxx_ccadc_reading_to_microvolt(
	the_chip->revision,
	((s64)result_gain - result_offset));

	pr_debug("gain result_gain = 0x%x, voltage = %d microVolts\n",
	result_gain, the_chip->ccadc_gain_uv);

	data_msb = result_gain >> 8;
	data_lsb = result_gain;
	rc = calib_ccadc_program_trim(the_chip, CCADC_FULLSCALE_TRIM1,
	data_msb, data_lsb, 0);
	if (rc)
	pr_debug("error = %d programming gain trim\n", rc);
	bail:
	pm8xxx_writeb(the_chip->dev->parent, ADC_ARB_SECP_CNTRL, sec_cntrl);
	}
	EXPORT_SYMBOL(pm8xxx_calib_ccadc);

	static void calibrate_ccadc_work(struct work_struct *work)
	{
	struct pm8xxx_ccadc_chip *chip = container_of(work,
	struct pm8xxx_ccadc_chip, calib_ccadc_work.work);

	pm8xxx_calib_ccadc();
	schedule_delayed_work(&chip->calib_ccadc_work,
	round_jiffies_relative(msecs_to_jiffies
	(chip->calib_delay_ms)));
	}

	static irqreturn_t pm8921_bms_ccadc_eoc_handler(int irq, void *data)
	{
	u8 data_msb, data_lsb;
	struct pm8xxx_ccadc_chip *chip = data;
	int rc;

	if (!the_chip)
	goto out;

	pr_debug("irq = %d triggered\n", irq);
	data_msb = chip->ccadc_offset >> 8;
	data_lsb = chip->ccadc_offset;

	rc = calib_ccadc_program_trim(chip, CCADC_OFFSET_TRIM1,
	data_msb, data_lsb, 0);
	disable_irq_nosync(chip->eoc_irq);

	out:
	return IRQ_HANDLED;
	}

	#define CCADC_IBAT_DIG_PARAM 0xA3
	#define CCADC_IBAT_RSV 0x10
	#define CCADC_IBAT_ANA_PARAM 0x1A
	static int ccadc_get_rsense_voltage(int *voltage_uv)
	{
	u16 raw;
	int result;
	int rc = 0;

	rc = calib_ccadc_enable_arbiter(the_chip);
	if (rc < 0) {
	pr_err("error = %d enabling arbiter for offset\n", rc);
	return rc;
	}

	rc = pm8xxx_writeb(the_chip->dev->parent, ADC_ARB_SECP_DIG_PARAM,
	CCADC_IBAT_DIG_PARAM);
	if (rc < 0) {
	pr_err("error = %d writing ADC_ARB_SECP_DIG_PARAM\n", rc);
	return rc;
	}

	rc = pm8xxx_writeb(the_chip->dev->parent, ADC_ARB_SECP_RSV,
	CCADC_IBAT_RSV);
	if (rc < 0) {
	pr_err("error = %d selecting rsense\n", rc);
	return rc;
	}

	rc = pm8xxx_writeb(the_chip->dev->parent,
	ADC_ARB_SECP_ANA_PARAM, CCADC_IBAT_ANA_PARAM);
	if (rc < 0) {
	pr_err("error = %d enabling ccadc\n", rc);
	return rc;
	}

	rc = calib_start_conv(the_chip, &raw);
	if (rc < 0) {
	pr_err("error = %d for zero volt measurement\n", rc);
	return rc;
	}

	pr_debug("Vsense raw = 0x%x\n", raw);
	result = cc_adjust_for_offset(raw);
	pr_debug("Vsense after offset raw = 0x%x offset=0x%x\n",
	result,
	the_chip->ccadc_offset);
	*voltage_uv = pm8xxx_ccadc_reading_to_microvolt(the_chip->revision,
	((s64)result));
	pr_debug("Vsense before gain of %d = %d uV\n", the_chip->ccadc_gain_uv,
	*voltage_uv);
	voltage_uv = pm8xxx_cc_adjust_for_gain(voltage_uv);

	pr_debug("Vsense = %d uV\n", *voltage_uv);
	return 0;
	}

	int pm8xxx_ccadc_get_battery_current(int *bat_current_ua)
	{
	int voltage_uv = 0, rc;

	rc = ccadc_get_rsense_voltage(&voltage_uv);
	if (rc) {
	pr_err("cant get voltage across rsense rc = %d\n", rc);
	return rc;
	}

	bat_current_ua = voltage_uv 1000/the_chip->r_sense;
	/*
	* ccadc reads +ve current when the battery is charging
	* We need to return -ve if the battery is charging
	*/
	bat_current_ua = -1 (*bat_current_ua);
	pr_debug("bat current = %d ma\n", *bat_current_ua);
	return 0;
	}
	EXPORT_SYMBOL(pm8xxx_ccadc_get_battery_current);

	static int get_reg(void data, u64 val)
	{
	int addr = (int)data;
	int ret;
	u8 temp;

	ret = pm8xxx_readb(the_chip->dev->parent, addr, &temp);
	if (ret) {
	pr_err("pm8xxx_readb to %x value = %d errored = %d\n",
	addr, temp, ret);
	return -EAGAIN;
	}
	*val = temp;
	return 0;
	}

	static int set_reg(void *data, u64 val)
	{
	int addr = (int)data;
	int ret;
	u8 temp;

	temp = (u8) val;
	ret = pm8xxx_writeb(the_chip->dev->parent, addr, temp);
	if (ret) {
	pr_err("pm8xxx_writeb to %x value = %d errored = %d\n",
	addr, temp, ret);
	return -EAGAIN;
	}
	return 0;
	}
	DEFINE_SIMPLE_ATTRIBUTE(reg_fops, get_reg, set_reg, "0x%02llx\n");

	static int get_calc(void data, u64 val)
	{
	int ibat, rc;

	rc = pm8xxx_ccadc_get_battery_current(&ibat);
	*val = ibat;
	return rc;
	}
	DEFINE_SIMPLE_ATTRIBUTE(calc_fops, get_calc, NULL, "%lld\n");

	static void create_debugfs_entries(struct pm8xxx_ccadc_chip *chip)
	{
	chip->dent = debugfs_create_dir("pm8xxx-ccadc", NULL);

	if (IS_ERR(chip->dent)) {
	pr_err("ccadc couldnt create debugfs dir\n");
	return;
	}

	debugfs_create_file("CCADC_ANA_PARAM", 0644, chip->dent,
	(void *)CCADC_ANA_PARAM, &reg_fops);
	debugfs_create_file("CCADC_DIG_PARAM", 0644, chip->dent,
	(void *)CCADC_DIG_PARAM, &reg_fops);
	debugfs_create_file("CCADC_RSV", 0644, chip->dent,
	(void *)CCADC_RSV, &reg_fops);
	debugfs_create_file("CCADC_DATA0", 0644, chip->dent,
	(void *)CCADC_DATA0, &reg_fops);
	debugfs_create_file("CCADC_DATA1", 0644, chip->dent,
	(void *)CCADC_DATA1, &reg_fops);
	debugfs_create_file("CCADC_OFFSET_TRIM1", 0644, chip->dent,
	(void *)CCADC_OFFSET_TRIM1, &reg_fops);
	debugfs_create_file("CCADC_OFFSET_TRIM0", 0644, chip->dent,
	(void *)CCADC_OFFSET_TRIM0, &reg_fops);
	debugfs_create_file("CCADC_FULLSCALE_TRIM1", 0644, chip->dent,
	(void *)CCADC_FULLSCALE_TRIM1, &reg_fops);
	debugfs_create_file("CCADC_FULLSCALE_TRIM0", 0644, chip->dent,
	(void *)CCADC_FULLSCALE_TRIM0, &reg_fops);

	debugfs_create_file("show_ibatt", 0644, chip->dent,
	(void *)0, &calc_fops);
	}

	static int __devinit pm8xxx_ccadc_probe(struct platform_device *pdev)
	{
	int rc = 0;
	struct pm8xxx_ccadc_chip *chip;
	struct resource *res;
	const struct pm8xxx_ccadc_platform_data *pdata
	= pdev->dev.platform_data;

	if (!pdata) {
	pr_err("missing platform data\n");
	return -EINVAL;
	}
	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
	"PM8921_BMS_CCADC_EOC");
	if (!res) {
	pr_err("failed to get irq\n");
	return -EINVAL;
	}

	chip = kzalloc(sizeof(struct pm8xxx_ccadc_chip), GFP_KERNEL);
	if (!chip) {
	pr_err("Cannot allocate pm_bms_chip\n");
	return -ENOMEM;
	}
	chip->dev = &pdev->dev;
	chip->revision = pm8xxx_get_revision(chip->dev->parent);
	chip->eoc_irq = res->start;
	chip->r_sense = pdata->r_sense;
	chip->calib_delay_ms = pdata->calib_delay_ms;

	calib_ccadc_read_offset_and_gain(chip,
	&chip->ccadc_gain_uv,
	&chip->ccadc_offset);
	rc = request_irq(chip->eoc_irq,
	pm8921_bms_ccadc_eoc_handler, IRQF_TRIGGER_RISING,
	"bms_eoc_ccadc", chip);
	if (rc) {
	pr_err("failed to request %d irq rc= %d\n", chip->eoc_irq, rc);
	goto free_chip;
	}

	disable_irq_nosync(chip->eoc_irq);

	platform_set_drvdata(pdev, chip);
	the_chip = chip;
	INIT_DELAYED_WORK(&chip->calib_ccadc_work, calibrate_ccadc_work);
	schedule_delayed_work(&chip->calib_ccadc_work, 0);

	create_debugfs_entries(chip);

	return 0;

	free_chip:
	kfree(chip);
	return rc;
	}

	static int __devexit pm8xxx_ccadc_remove(struct platform_device *pdev)
	{
	struct pm8xxx_ccadc_chip *chip = platform_get_drvdata(pdev);

	debugfs_remove_recursive(chip->dent);
	the_chip = NULL;
	kfree(chip);
	return 0;
	}

	static struct platform_driver pm8xxx_ccadc_driver = {
	.probe = pm8xxx_ccadc_probe,
	.remove = __devexit_p(pm8xxx_ccadc_remove),
	.driver = {
	.name = PM8XXX_CCADC_DEV_NAME,
	.owner = THIS_MODULE,
	},
	};

	static int __init pm8xxx_ccadc_init(void)
	{
	return platform_driver_register(&pm8xxx_ccadc_driver);
	}

	static void __exit pm8xxx_ccadc_exit(void)
	{
	platform_driver_unregister(&pm8xxx_ccadc_driver);
	}

	module_init(pm8xxx_ccadc_init);
	module_exit(pm8xxx_ccadc_exit);

	MODULE_LICENSE("GPL v2");
	MODULE_DESCRIPTION("PMIC8XXX ccadc driver");
	MODULE_VERSION("1.0");
	MODULE_ALIAS("platform:" PM8XXX_CCADC_DEV_NAME);