Merge master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc
* master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc:
[PATCH] powerpc: iSeries needs slb_initialize to be called
powerpc: hook up the splice syscall
[PATCH] powerpc/cell: compile fixes
[PATCH] powerpc: trivial spelling fixes in fault.c
[PATCH] powerpc/pseries: EEH Cleanup
[PATCH] powerpc/pseries: misc lparcfg fixes
[PATCH] powerpc/pseries: fix device name printing, again.
[PATCH] powerpc: Extends HCALL interface for InfiniBand usage
[PATCH] powerpc/pseries: Change H_StudlyCaps to H_SHOUTING_CAPS
[PATCH] powerpc/pseries: print message if EEH recovery fails
[PATCH] powerpc/pseries: mutex lock to serialize EEH event processing
powerpc: converted embedded platforms to use new define_machine support
powerpc: merge machine_check_exception between ppc32 & ppc64
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index 1b73508..2cbde86 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -37,7 +37,7 @@
#include <asm/prom.h>
#include <asm/vdso_datapage.h>
-#define MODULE_VERS "1.6"
+#define MODULE_VERS "1.7"
#define MODULE_NAME "lparcfg"
/* #define LPARCFG_DEBUG */
@@ -149,17 +149,17 @@
if (rc == 0) /* success, return */
return;
/* check for null tag ? */
- if (rc == H_Hardware)
+ if (rc == H_HARDWARE)
printk(KERN_INFO
"plpar-hcall (%s) failed with hardware fault\n", tag);
- else if (rc == H_Function)
+ else if (rc == H_FUNCTION)
printk(KERN_INFO
"plpar-hcall (%s) failed; function not allowed\n", tag);
- else if (rc == H_Authority)
+ else if (rc == H_AUTHORITY)
printk(KERN_INFO
- "plpar-hcall (%s) failed; not authorized to this function\n",
- tag);
- else if (rc == H_Parameter)
+ "plpar-hcall (%s) failed; not authorized to this"
+ " function\n", tag);
+ else if (rc == H_PARAMETER)
printk(KERN_INFO "plpar-hcall (%s) failed; Bad parameter(s)\n",
tag);
else
@@ -209,7 +209,7 @@
unsigned long dummy;
rc = plpar_hcall(H_PIC, 0, 0, 0, 0, pool_idle_time, num_procs, &dummy);
- if (rc != H_Authority)
+ if (rc != H_AUTHORITY)
log_plpar_hcall_return(rc, "H_PIC");
}
@@ -242,7 +242,7 @@
{
int call_status;
- char *local_buffer = kmalloc(SPLPAR_MAXLENGTH, GFP_KERNEL);
+ unsigned char *local_buffer = kmalloc(SPLPAR_MAXLENGTH, GFP_KERNEL);
if (!local_buffer) {
printk(KERN_ERR "%s %s kmalloc failure at line %d \n",
__FILE__, __FUNCTION__, __LINE__);
@@ -254,7 +254,8 @@
call_status = rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1,
NULL,
SPLPAR_CHARACTERISTICS_TOKEN,
- __pa(rtas_data_buf));
+ __pa(rtas_data_buf),
+ RTAS_DATA_BUF_SIZE);
memcpy(local_buffer, rtas_data_buf, SPLPAR_MAXLENGTH);
spin_unlock(&rtas_data_buf_lock);
@@ -275,7 +276,7 @@
#ifdef LPARCFG_DEBUG
printk(KERN_INFO "success calling get-system-parameter \n");
#endif
- splpar_strlen = local_buffer[0] * 16 + local_buffer[1];
+ splpar_strlen = local_buffer[0] * 256 + local_buffer[1];
local_buffer += 2; /* step over strlen value */
memset(workbuffer, 0, SPLPAR_MAXLENGTH);
@@ -529,13 +530,13 @@
retval = plpar_hcall_norets(H_SET_PPP, *new_entitled_ptr,
*new_weight_ptr);
- if (retval == H_Success || retval == H_Constrained) {
+ if (retval == H_SUCCESS || retval == H_CONSTRAINED) {
retval = count;
- } else if (retval == H_Busy) {
+ } else if (retval == H_BUSY) {
retval = -EBUSY;
- } else if (retval == H_Hardware) {
+ } else if (retval == H_HARDWARE) {
retval = -EIO;
- } else if (retval == H_Parameter) {
+ } else if (retval == H_PARAMETER) {
retval = -EINVAL;
} else {
printk(KERN_WARNING "%s: received unknown hv return code %ld",
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 06636c9..0112318 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -578,18 +578,18 @@
* We use "waiting" to indicate our state. As long
* as it is >0, we are still trying to all join up.
* If it goes to 0, we have successfully joined up and
- * one thread got H_Continue. If any error happens,
+ * one thread got H_CONTINUE. If any error happens,
* we set it to <0.
*/
local_irq_save(flags);
do {
rc = plpar_hcall_norets(H_JOIN);
smp_rmb();
- } while (rc == H_Success && data->waiting > 0);
- if (rc == H_Success)
+ } while (rc == H_SUCCESS && data->waiting > 0);
+ if (rc == H_SUCCESS)
goto out;
- if (rc == H_Continue) {
+ if (rc == H_CONTINUE) {
data->waiting = 0;
data->args->args[data->args->nargs] =
rtas_call(ibm_suspend_me_token, 0, 1, NULL);
@@ -597,7 +597,7 @@
plpar_hcall_norets(H_PROD,i);
} else {
data->waiting = -EBUSY;
- printk(KERN_ERR "Error on H_Join hypervisor call\n");
+ printk(KERN_ERR "Error on H_JOIN hypervisor call\n");
}
out:
@@ -624,7 +624,7 @@
printk(KERN_ERR "Error doing global join\n");
/* Prod each CPU. This won't hurt, and will wake
- * anyone we successfully put to sleep with H_Join
+ * anyone we successfully put to sleep with H_JOIN.
*/
for_each_possible_cpu(i)
plpar_hcall_norets(H_PROD, i);
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index a72bf5d..69ac257 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -50,7 +50,6 @@
#include <asm/kgdb.h>
#endif
-extern void platform_init(void);
extern void bootx_init(unsigned long r4, unsigned long phys);
boot_infos_t *boot_infos;
@@ -138,12 +137,7 @@
strlcpy(cmd_line, CONFIG_CMDLINE, sizeof(cmd_line));
#endif /* CONFIG_CMDLINE */
-#ifdef CONFIG_PPC_MULTIPLATFORM
probe_machine();
-#else
- /* Base init based on machine type. Obsoloete, please kill ! */
- platform_init();
-#endif
#ifdef CONFIG_6xx
if (cpu_has_feature(CPU_FTR_CAN_DOZE) ||
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 59aa92c..13e91c4 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -215,12 +215,10 @@
/*
* Initialize stab / SLB management except on iSeries
*/
- if (!firmware_has_feature(FW_FEATURE_ISERIES)) {
- if (cpu_has_feature(CPU_FTR_SLB))
- slb_initialize();
- else
- stab_initialize(get_paca()->stab_real);
- }
+ if (cpu_has_feature(CPU_FTR_SLB))
+ slb_initialize();
+ else if (!firmware_has_feature(FW_FEATURE_ISERIES))
+ stab_initialize(get_paca()->stab_real);
DBG(" <- early_setup()\n");
}
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 4cbde21..064a525 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -228,7 +228,7 @@
*/
static inline int check_io_access(struct pt_regs *regs)
{
-#ifdef CONFIG_PPC_PMAC
+#if defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32)
unsigned long msr = regs->msr;
const struct exception_table_entry *entry;
unsigned int *nip = (unsigned int *)regs->nip;
@@ -261,7 +261,7 @@
return 1;
}
}
-#endif /* CONFIG_PPC_PMAC */
+#endif /* CONFIG_PPC_PMAC && CONFIG_PPC32 */
return 0;
}
@@ -308,8 +308,8 @@
void machine_check_exception(struct pt_regs *regs)
{
-#ifdef CONFIG_PPC64
int recover = 0;
+ unsigned long reason = get_mc_reason(regs);
/* See if any machine dependent calls */
if (ppc_md.machine_check_exception)
@@ -317,8 +317,6 @@
if (recover)
return;
-#else
- unsigned long reason = get_mc_reason(regs);
if (user_mode(regs)) {
regs->msr |= MSR_RI;
@@ -462,7 +460,6 @@
* additional info, e.g. bus error registers.
*/
platform_machine_check(regs);
-#endif /* CONFIG_PPC64 */
if (debugger_fault_handler(regs))
return;
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index 5aea090..fdbba42 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -177,15 +177,15 @@
/* When running in the kernel we expect faults to occur only to
* addresses in user space. All other faults represent errors in the
- * kernel and should generate an OOPS. Unfortunatly, in the case of an
- * erroneous fault occuring in a code path which already holds mmap_sem
+ * kernel and should generate an OOPS. Unfortunately, in the case of an
+ * erroneous fault occurring in a code path which already holds mmap_sem
* we will deadlock attempting to validate the fault against the
* address space. Luckily the kernel only validly references user
* space from well defined areas of code, which are listed in the
* exceptions table.
*
* As the vast majority of faults will be valid we will only perform
- * the source reference check when there is a possibilty of a deadlock.
+ * the source reference check when there is a possibility of a deadlock.
* Attempt to lock the address space, if we cannot we then validate the
* source. If this is invalid we can skip the address space check,
* thus avoiding the deadlock.
diff --git a/arch/powerpc/platforms/83xx/mpc834x_sys.c b/arch/powerpc/platforms/83xx/mpc834x_sys.c
index 7c18b4c..7e789d2 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_sys.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_sys.c
@@ -158,25 +158,25 @@
late_initcall(mpc834x_rtc_hookup);
#endif
-void __init platform_init(void)
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc834x_sys_probe(void)
{
- /* setup the PowerPC module struct */
- ppc_md.setup_arch = mpc834x_sys_setup_arch;
-
- ppc_md.init_IRQ = mpc834x_sys_init_IRQ;
- ppc_md.get_irq = ipic_get_irq;
-
- ppc_md.restart = mpc83xx_restart;
-
- ppc_md.time_init = mpc83xx_time_init;
- ppc_md.set_rtc_time = NULL;
- ppc_md.get_rtc_time = NULL;
- ppc_md.calibrate_decr = generic_calibrate_decr;
-
- ppc_md.progress = udbg_progress;
-
- if (ppc_md.progress)
- ppc_md.progress("mpc834x_sys_init(): exit", 0);
-
- return;
+ /* We always match for now, eventually we should look at the flat
+ dev tree to ensure this is the board we are suppose to run on
+ */
+ return 1;
}
+
+define_machine(mpc834x_sys) {
+ .name = "MPC834x SYS",
+ .probe = mpc834x_sys_probe,
+ .setup_arch = mpc834x_sys_setup_arch,
+ .init_IRQ = mpc834x_sys_init_IRQ,
+ .get_irq = ipic_get_irq,
+ .restart = mpc83xx_restart,
+ .time_init = mpc83xx_time_init,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index b7821db..5eeff37 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -220,25 +220,25 @@
seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
}
-void __init platform_init(void)
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init mpc85xx_ads_probe(void)
{
- ppc_md.setup_arch = mpc85xx_ads_setup_arch;
- ppc_md.show_cpuinfo = mpc85xx_ads_show_cpuinfo;
-
- ppc_md.init_IRQ = mpc85xx_ads_pic_init;
- ppc_md.get_irq = mpic_get_irq;
-
- ppc_md.restart = mpc85xx_restart;
- ppc_md.power_off = NULL;
- ppc_md.halt = NULL;
-
- ppc_md.time_init = NULL;
- ppc_md.set_rtc_time = NULL;
- ppc_md.get_rtc_time = NULL;
- ppc_md.calibrate_decr = generic_calibrate_decr;
-
- ppc_md.progress = udbg_progress;
-
- if (ppc_md.progress)
- ppc_md.progress("mpc85xx_ads platform_init(): exit", 0);
+ /* We always match for now, eventually we should look at the flat
+ dev tree to ensure this is the board we are suppose to run on
+ */
+ return 1;
}
+
+define_machine(mpc85xx_ads) {
+ .name = "MPC85xx ADS",
+ .probe = mpc85xx_ads_probe,
+ .setup_arch = mpc85xx_ads_setup_arch,
+ .init_IRQ = mpc85xx_ads_pic_init,
+ .show_cpuinfo = mpc85xx_ads_show_cpuinfo,
+ .get_irq = mpic_get_irq,
+ .restart = mpc85xx_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/cell/spu_callbacks.c b/arch/powerpc/platforms/cell/spu_callbacks.c
index 3a4245c..6594bec 100644
--- a/arch/powerpc/platforms/cell/spu_callbacks.c
+++ b/arch/powerpc/platforms/cell/spu_callbacks.c
@@ -316,6 +316,7 @@
[__NR_pselect6] sys_ni_syscall, /* sys_pselect */
[__NR_ppoll] sys_ni_syscall, /* sys_ppoll */
[__NR_unshare] sys_unshare,
+ [__NR_splice] sys_splice,
};
long spu_sys_callback(struct spu_syscall_block *s)
diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c
index c04e078..483c8b7 100644
--- a/arch/powerpc/platforms/cell/spufs/run.c
+++ b/arch/powerpc/platforms/cell/spufs/run.c
@@ -2,6 +2,7 @@
#include <linux/ptrace.h>
#include <asm/spu.h>
+#include <asm/unistd.h>
#include "spufs.h"
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 9b2b1cb..780fb27 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -865,7 +865,7 @@
* on the CEC architecture, type of the device, on earlier boot
* command-line arguments & etc.
*/
-void eeh_add_device_early(struct device_node *dn)
+static void eeh_add_device_early(struct device_node *dn)
{
struct pci_controller *phb;
struct eeh_early_enable_info info;
@@ -882,7 +882,6 @@
info.buid_lo = BUID_LO(phb->buid);
early_enable_eeh(dn, &info);
}
-EXPORT_SYMBOL_GPL(eeh_add_device_early);
void eeh_add_device_tree_early(struct device_node *dn)
{
@@ -893,20 +892,6 @@
}
EXPORT_SYMBOL_GPL(eeh_add_device_tree_early);
-void eeh_add_device_tree_late(struct pci_bus *bus)
-{
- struct pci_dev *dev;
-
- list_for_each_entry(dev, &bus->devices, bus_list) {
- eeh_add_device_late(dev);
- if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
- struct pci_bus *subbus = dev->subordinate;
- if (subbus)
- eeh_add_device_tree_late(subbus);
- }
- }
-}
-
/**
* eeh_add_device_late - perform EEH initialization for the indicated pci device
* @dev: pci device for which to set up EEH
@@ -914,7 +899,7 @@
* This routine must be used to complete EEH initialization for PCI
* devices that were added after system boot (e.g. hotplug, dlpar).
*/
-void eeh_add_device_late(struct pci_dev *dev)
+static void eeh_add_device_late(struct pci_dev *dev)
{
struct device_node *dn;
struct pci_dn *pdn;
@@ -933,16 +918,33 @@
pci_addr_cache_insert_device (dev);
}
-EXPORT_SYMBOL_GPL(eeh_add_device_late);
+
+void eeh_add_device_tree_late(struct pci_bus *bus)
+{
+ struct pci_dev *dev;
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ eeh_add_device_late(dev);
+ if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+ struct pci_bus *subbus = dev->subordinate;
+ if (subbus)
+ eeh_add_device_tree_late(subbus);
+ }
+ }
+}
+EXPORT_SYMBOL_GPL(eeh_add_device_tree_late);
/**
* eeh_remove_device - undo EEH setup for the indicated pci device
* @dev: pci device to be removed
*
- * This routine should be when a device is removed from a running
- * system (e.g. by hotplug or dlpar).
+ * This routine should be called when a device is removed from
+ * a running system (e.g. by hotplug or dlpar). It unregisters
+ * the PCI device from the EEH subsystem. I/O errors affecting
+ * this device will no longer be detected after this call; thus,
+ * i/o errors affecting this slot may leave this device unusable.
*/
-void eeh_remove_device(struct pci_dev *dev)
+static void eeh_remove_device(struct pci_dev *dev)
{
struct device_node *dn;
if (!dev || !eeh_subsystem_enabled)
@@ -958,21 +960,17 @@
PCI_DN(dn)->pcidev = NULL;
pci_dev_put (dev);
}
-EXPORT_SYMBOL_GPL(eeh_remove_device);
void eeh_remove_bus_device(struct pci_dev *dev)
{
+ struct pci_bus *bus = dev->subordinate;
+ struct pci_dev *child, *tmp;
+
eeh_remove_device(dev);
- if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
- struct pci_bus *bus = dev->subordinate;
- struct list_head *ln;
- if (!bus)
- return;
- for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) {
- struct pci_dev *pdev = pci_dev_b(ln);
- if (pdev)
- eeh_remove_bus_device(pdev);
- }
+
+ if (bus && dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+ list_for_each_entry_safe(child, tmp, &bus->devices, bus_list)
+ eeh_remove_bus_device(child);
}
}
EXPORT_SYMBOL_GPL(eeh_remove_bus_device);
diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c
index cc2495a..1fba695 100644
--- a/arch/powerpc/platforms/pseries/eeh_driver.c
+++ b/arch/powerpc/platforms/pseries/eeh_driver.c
@@ -293,15 +293,16 @@
frozen_pdn = PCI_DN(frozen_dn);
frozen_pdn->eeh_freeze_count++;
- pci_str = pci_name (frozen_pdn->pcidev);
- drv_str = pcid_name (frozen_pdn->pcidev);
- if (!pci_str) {
+ if (frozen_pdn->pcidev) {
+ pci_str = pci_name (frozen_pdn->pcidev);
+ drv_str = pcid_name (frozen_pdn->pcidev);
+ } else {
pci_str = pci_name (event->dev);
drv_str = pcid_name (event->dev);
}
if (frozen_pdn->eeh_freeze_count > EEH_MAX_ALLOWED_FREEZES)
- goto hard_fail;
+ goto excess_failures;
/* If the reset state is a '5' and the time to reset is 0 (infinity)
* or is more then 15 seconds, then mark this as a permanent failure.
@@ -356,7 +357,7 @@
return;
-hard_fail:
+excess_failures:
/*
* About 90% of all real-life EEH failures in the field
* are due to poorly seated PCI cards. Only 10% or so are
@@ -367,7 +368,15 @@
"and has been permanently disabled. Please try reseating\n"
"this device or replacing it.\n",
drv_str, pci_str, frozen_pdn->eeh_freeze_count);
+ goto perm_error;
+hard_fail:
+ printk(KERN_ERR
+ "EEH: Unable to recover from failure of PCI device %s - %s\n"
+ "Please try reseating this device or replacing it.\n",
+ drv_str, pci_str);
+
+perm_error:
eeh_slot_error_detail(frozen_pdn, 2 /* Permanent Error */);
/* Notify all devices that they're about to go down. */
diff --git a/arch/powerpc/platforms/pseries/eeh_event.c b/arch/powerpc/platforms/pseries/eeh_event.c
index 9a9961f..a1bda6f 100644
--- a/arch/powerpc/platforms/pseries/eeh_event.c
+++ b/arch/powerpc/platforms/pseries/eeh_event.c
@@ -19,7 +19,9 @@
*/
#include <linux/list.h>
+#include <linux/mutex.h>
#include <linux/pci.h>
+#include <linux/workqueue.h>
#include <asm/eeh_event.h>
#include <asm/ppc-pci.h>
@@ -37,14 +39,18 @@
static void eeh_thread_launcher(void *);
DECLARE_WORK(eeh_event_wq, eeh_thread_launcher, NULL);
+/* Serialize reset sequences for a given pci device */
+DEFINE_MUTEX(eeh_event_mutex);
+
/**
- * eeh_event_handler - dispatch EEH events. The detection of a frozen
- * slot can occur inside an interrupt, where it can be hard to do
- * anything about it. The goal of this routine is to pull these
- * detection events out of the context of the interrupt handler, and
- * re-dispatch them for processing at a later time in a normal context.
- *
+ * eeh_event_handler - dispatch EEH events.
* @dummy - unused
+ *
+ * The detection of a frozen slot can occur inside an interrupt,
+ * where it can be hard to do anything about it. The goal of this
+ * routine is to pull these detection events out of the context
+ * of the interrupt handler, and re-dispatch them for processing
+ * at a later time in a normal context.
*/
static int eeh_event_handler(void * dummy)
{
@@ -64,23 +70,24 @@
event = list_entry(eeh_eventlist.next, struct eeh_event, list);
list_del(&event->list);
}
-
- if (event)
- eeh_mark_slot(event->dn, EEH_MODE_RECOVERING);
-
spin_unlock_irqrestore(&eeh_eventlist_lock, flags);
+
if (event == NULL)
break;
+ /* Serialize processing of EEH events */
+ mutex_lock(&eeh_event_mutex);
+ eeh_mark_slot(event->dn, EEH_MODE_RECOVERING);
+
printk(KERN_INFO "EEH: Detected PCI bus error on device %s\n",
pci_name(event->dev));
handle_eeh_events(event);
eeh_clear_slot(event->dn, EEH_MODE_RECOVERING);
-
pci_dev_put(event->dev);
kfree(event);
+ mutex_unlock(&eeh_event_mutex);
}
return 0;
@@ -88,7 +95,6 @@
/**
* eeh_thread_launcher
- *
* @dummy - unused
*/
static void eeh_thread_launcher(void *dummy)
diff --git a/arch/powerpc/platforms/pseries/hvCall.S b/arch/powerpc/platforms/pseries/hvCall.S
index db7c19f..c9ff547 100644
--- a/arch/powerpc/platforms/pseries/hvCall.S
+++ b/arch/powerpc/platforms/pseries/hvCall.S
@@ -127,3 +127,103 @@
mtcrf 0xff,r0
blr /* return r3 = status */
+
+/* plpar_hcall_7arg_7ret(unsigned long opcode, R3
+ unsigned long arg1, R4
+ unsigned long arg2, R5
+ unsigned long arg3, R6
+ unsigned long arg4, R7
+ unsigned long arg5, R8
+ unsigned long arg6, R9
+ unsigned long arg7, R10
+ unsigned long *out1, 112(R1)
+ unsigned long *out2, 110(R1)
+ unsigned long *out3, 108(R1)
+ unsigned long *out4, 106(R1)
+ unsigned long *out5, 104(R1)
+ unsigned long *out6, 102(R1)
+ unsigned long *out7); 100(R1)
+*/
+_GLOBAL(plpar_hcall_7arg_7ret)
+ HMT_MEDIUM
+
+ mfcr r0
+ stw r0,8(r1)
+
+ HVSC /* invoke the hypervisor */
+
+ lwz r0,8(r1)
+
+ ld r11,STK_PARM(r11)(r1) /* Fetch r4 ret arg */
+ std r4,0(r11)
+ ld r11,STK_PARM(r12)(r1) /* Fetch r5 ret arg */
+ std r5,0(r11)
+ ld r11,STK_PARM(r13)(r1) /* Fetch r6 ret arg */
+ std r6,0(r11)
+ ld r11,STK_PARM(r14)(r1) /* Fetch r7 ret arg */
+ std r7,0(r11)
+ ld r11,STK_PARM(r15)(r1) /* Fetch r8 ret arg */
+ std r8,0(r11)
+ ld r11,STK_PARM(r16)(r1) /* Fetch r9 ret arg */
+ std r9,0(r11)
+ ld r11,STK_PARM(r17)(r1) /* Fetch r10 ret arg */
+ std r10,0(r11)
+
+ mtcrf 0xff,r0
+
+ blr /* return r3 = status */
+
+/* plpar_hcall_9arg_9ret(unsigned long opcode, R3
+ unsigned long arg1, R4
+ unsigned long arg2, R5
+ unsigned long arg3, R6
+ unsigned long arg4, R7
+ unsigned long arg5, R8
+ unsigned long arg6, R9
+ unsigned long arg7, R10
+ unsigned long arg8, 112(R1)
+ unsigned long arg9, 110(R1)
+ unsigned long *out1, 108(R1)
+ unsigned long *out2, 106(R1)
+ unsigned long *out3, 104(R1)
+ unsigned long *out4, 102(R1)
+ unsigned long *out5, 100(R1)
+ unsigned long *out6, 98(R1)
+ unsigned long *out7); 96(R1)
+ unsigned long *out8, 94(R1)
+ unsigned long *out9, 92(R1)
+*/
+_GLOBAL(plpar_hcall_9arg_9ret)
+ HMT_MEDIUM
+
+ mfcr r0
+ stw r0,8(r1)
+
+ ld r11,STK_PARM(r11)(r1) /* put arg8 in R11 */
+ ld r12,STK_PARM(r12)(r1) /* put arg9 in R12 */
+
+ HVSC /* invoke the hypervisor */
+
+ ld r0,STK_PARM(r13)(r1) /* Fetch r4 ret arg */
+ stdx r4,r0,r0
+ ld r0,STK_PARM(r14)(r1) /* Fetch r5 ret arg */
+ stdx r5,r0,r0
+ ld r0,STK_PARM(r15)(r1) /* Fetch r6 ret arg */
+ stdx r6,r0,r0
+ ld r0,STK_PARM(r16)(r1) /* Fetch r7 ret arg */
+ stdx r7,r0,r0
+ ld r0,STK_PARM(r17)(r1) /* Fetch r8 ret arg */
+ stdx r8,r0,r0
+ ld r0,STK_PARM(r18)(r1) /* Fetch r9 ret arg */
+ stdx r9,r0,r0
+ ld r0,STK_PARM(r19)(r1) /* Fetch r10 ret arg */
+ stdx r10,r0,r0
+ ld r0,STK_PARM(r20)(r1) /* Fetch r11 ret arg */
+ stdx r11,r0,r0
+ ld r0,STK_PARM(r21)(r1) /* Fetch r12 ret arg */
+ stdx r12,r0,r0
+
+ lwz r0,8(r1)
+ mtcrf 0xff,r0
+
+ blr /* return r3 = status */
diff --git a/arch/powerpc/platforms/pseries/hvconsole.c b/arch/powerpc/platforms/pseries/hvconsole.c
index ba6befd..a72a987 100644
--- a/arch/powerpc/platforms/pseries/hvconsole.c
+++ b/arch/powerpc/platforms/pseries/hvconsole.c
@@ -41,7 +41,7 @@
unsigned long got;
if (plpar_hcall(H_GET_TERM_CHAR, vtermno, 0, 0, 0, &got,
- (unsigned long *)buf, (unsigned long *)buf+1) == H_Success)
+ (unsigned long *)buf, (unsigned long *)buf+1) == H_SUCCESS)
return got;
return 0;
}
@@ -69,9 +69,9 @@
ret = plpar_hcall_norets(H_PUT_TERM_CHAR, vtermno, count, lbuf[0],
lbuf[1]);
- if (ret == H_Success)
+ if (ret == H_SUCCESS)
return count;
- if (ret == H_Busy)
+ if (ret == H_BUSY)
return 0;
return -EIO;
}
diff --git a/arch/powerpc/platforms/pseries/hvcserver.c b/arch/powerpc/platforms/pseries/hvcserver.c
index 22bfb5c..fcf4b4c 100644
--- a/arch/powerpc/platforms/pseries/hvcserver.c
+++ b/arch/powerpc/platforms/pseries/hvcserver.c
@@ -43,21 +43,21 @@
static int hvcs_convert(long to_convert)
{
switch (to_convert) {
- case H_Success:
+ case H_SUCCESS:
return 0;
- case H_Parameter:
+ case H_PARAMETER:
return -EINVAL;
- case H_Hardware:
+ case H_HARDWARE:
return -EIO;
- case H_Busy:
- case H_LongBusyOrder1msec:
- case H_LongBusyOrder10msec:
- case H_LongBusyOrder100msec:
- case H_LongBusyOrder1sec:
- case H_LongBusyOrder10sec:
- case H_LongBusyOrder100sec:
+ case H_BUSY:
+ case H_LONG_BUSY_ORDER_1_MSEC:
+ case H_LONG_BUSY_ORDER_10_MSEC:
+ case H_LONG_BUSY_ORDER_100_MSEC:
+ case H_LONG_BUSY_ORDER_1_SEC:
+ case H_LONG_BUSY_ORDER_10_SEC:
+ case H_LONG_BUSY_ORDER_100_SEC:
return -EBUSY;
- case H_Function: /* fall through */
+ case H_FUNCTION: /* fall through */
default:
return -EPERM;
}
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 8952528..634b7d0 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -54,7 +54,8 @@
EXPORT_SYMBOL(plpar_hcall_4out);
EXPORT_SYMBOL(plpar_hcall_norets);
EXPORT_SYMBOL(plpar_hcall_8arg_2ret);
-
+EXPORT_SYMBOL(plpar_hcall_7arg_7ret);
+EXPORT_SYMBOL(plpar_hcall_9arg_9ret);
extern void pSeries_find_serial_port(void);
@@ -72,7 +73,7 @@
do {
rc = plpar_put_term_char(vtermno, sizeof(packet), packet);
- } while (rc == H_Busy);
+ } while (rc == H_BUSY);
}
static long hvsi_udbg_buf_len;
@@ -85,7 +86,7 @@
if (hvsi_udbg_buf_len == 0) {
rc = plpar_get_term_char(vtermno, &hvsi_udbg_buf_len, hvsi_udbg_buf);
- if (rc != H_Success || hvsi_udbg_buf[0] != 0xff) {
+ if (rc != H_SUCCESS || hvsi_udbg_buf[0] != 0xff) {
/* bad read or non-data packet */
hvsi_udbg_buf_len = 0;
} else {
@@ -139,7 +140,7 @@
buf[0] = c;
do {
rc = plpar_put_term_char(vtermno, 1, buf);
- } while(rc == H_Busy);
+ } while(rc == H_BUSY);
}
/* Buffered chars getc */
@@ -158,7 +159,7 @@
/* get some more chars. */
inbuflen = 0;
rc = plpar_get_term_char(vtermno, &inbuflen, buf);
- if (rc != H_Success)
+ if (rc != H_SUCCESS)
inbuflen = 0; /* otherwise inbuflen is garbage */
}
if (inbuflen <= 0 || inbuflen > 16) {
@@ -304,7 +305,7 @@
lpar_rc = plpar_hcall(H_ENTER, flags, hpte_group, hpte_v,
hpte_r, &slot, &dummy0, &dummy1);
- if (unlikely(lpar_rc == H_PTEG_Full)) {
+ if (unlikely(lpar_rc == H_PTEG_FULL)) {
if (!(vflags & HPTE_V_BOLTED))
DBG_LOW(" full\n");
return -1;
@@ -315,7 +316,7 @@
* will fail. However we must catch the failure in hash_page
* or we will loop forever, so return -2 in this case.
*/
- if (unlikely(lpar_rc != H_Success)) {
+ if (unlikely(lpar_rc != H_SUCCESS)) {
if (!(vflags & HPTE_V_BOLTED))
DBG_LOW(" lpar err %d\n", lpar_rc);
return -2;
@@ -346,9 +347,9 @@
/* don't remove a bolted entry */
lpar_rc = plpar_pte_remove(H_ANDCOND, hpte_group + slot_offset,
(0x1UL << 4), &dummy1, &dummy2);
- if (lpar_rc == H_Success)
+ if (lpar_rc == H_SUCCESS)
return i;
- BUG_ON(lpar_rc != H_Not_Found);
+ BUG_ON(lpar_rc != H_NOT_FOUND);
slot_offset++;
slot_offset &= 0x7;
@@ -391,14 +392,14 @@
lpar_rc = plpar_pte_protect(flags, slot, want_v & HPTE_V_AVPN);
- if (lpar_rc == H_Not_Found) {
+ if (lpar_rc == H_NOT_FOUND) {
DBG_LOW("not found !\n");
return -1;
}
DBG_LOW("ok\n");
- BUG_ON(lpar_rc != H_Success);
+ BUG_ON(lpar_rc != H_SUCCESS);
return 0;
}
@@ -417,7 +418,7 @@
lpar_rc = plpar_pte_read(flags, slot, &dword0, &dummy_word1);
- BUG_ON(lpar_rc != H_Success);
+ BUG_ON(lpar_rc != H_SUCCESS);
return dword0;
}
@@ -468,7 +469,7 @@
flags = newpp & 7;
lpar_rc = plpar_pte_protect(flags, slot, 0);
- BUG_ON(lpar_rc != H_Success);
+ BUG_ON(lpar_rc != H_SUCCESS);
}
static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long va,
@@ -484,10 +485,10 @@
want_v = hpte_encode_v(va, psize);
lpar_rc = plpar_pte_remove(H_AVPN, slot, want_v & HPTE_V_AVPN,
&dummy1, &dummy2);
- if (lpar_rc == H_Not_Found)
+ if (lpar_rc == H_NOT_FOUND)
return;
- BUG_ON(lpar_rc != H_Success);
+ BUG_ON(lpar_rc != H_SUCCESS);
}
/*
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index b2fbf8b..5eb55ef 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -463,7 +463,7 @@
* very low priority. The cede enables interrupts, which
* doesn't matter here.
*/
- if (!lppaca[cpu ^ 1].idle || poll_pending() == H_Pending)
+ if (!lppaca[cpu ^ 1].idle || poll_pending() == H_PENDING)
cede_processor();
out:
diff --git a/arch/powerpc/platforms/pseries/vio.c b/arch/powerpc/platforms/pseries/vio.c
index 866379b..8e53e04 100644
--- a/arch/powerpc/platforms/pseries/vio.c
+++ b/arch/powerpc/platforms/pseries/vio.c
@@ -258,7 +258,7 @@
int vio_enable_interrupts(struct vio_dev *dev)
{
int rc = h_vio_signal(dev->unit_address, VIO_IRQ_ENABLE);
- if (rc != H_Success)
+ if (rc != H_SUCCESS)
printk(KERN_ERR "vio: Error 0x%x enabling interrupts\n", rc);
return rc;
}
@@ -267,7 +267,7 @@
int vio_disable_interrupts(struct vio_dev *dev)
{
int rc = h_vio_signal(dev->unit_address, VIO_IRQ_DISABLE);
- if (rc != H_Success)
+ if (rc != H_SUCCESS)
printk(KERN_ERR "vio: Error 0x%x disabling interrupts\n", rc);
return rc;
}
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index 4864cb3..2d60ea3 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -168,7 +168,7 @@
unsigned long return_value;
lpar_rc = plpar_xirr(&return_value);
- if (lpar_rc != H_Success)
+ if (lpar_rc != H_SUCCESS)
panic(" bad return code xirr - rc = %lx \n", lpar_rc);
return (int)return_value;
}
@@ -179,7 +179,7 @@
unsigned long val64 = value & 0xffffffff;
lpar_rc = plpar_eoi(val64);
- if (lpar_rc != H_Success)
+ if (lpar_rc != H_SUCCESS)
panic("bad return code EOI - rc = %ld, value=%lx\n", lpar_rc,
val64);
}
@@ -189,7 +189,7 @@
unsigned long lpar_rc;
lpar_rc = plpar_cppr(value);
- if (lpar_rc != H_Success)
+ if (lpar_rc != H_SUCCESS)
panic("bad return code cppr - rc = %lx\n", lpar_rc);
}
@@ -198,7 +198,7 @@
unsigned long lpar_rc;
lpar_rc = plpar_ipi(get_hard_smp_processor_id(n_cpu), value);
- if (lpar_rc != H_Success)
+ if (lpar_rc != H_SUCCESS)
panic("bad return code qirr - rc = %lx\n", lpar_rc);
}
diff --git a/drivers/char/hvcs.c b/drivers/char/hvcs.c
index 327b00c..8d97b39 100644
--- a/drivers/char/hvcs.c
+++ b/drivers/char/hvcs.c
@@ -904,7 +904,7 @@
* It is possible the vty-server was removed after the irq was
* requested but before we have time to enable interrupts.
*/
- if (vio_enable_interrupts(vdev) == H_Success)
+ if (vio_enable_interrupts(vdev) == H_SUCCESS)
return 0;
else {
printk(KERN_ERR "HVCS: int enable failed for"
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index ceb98fd..52d0102 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -235,7 +235,7 @@
lpar_rc = h_add_logical_lan_buffer(adapter->vdev->unit_address, desc.desc);
- if(lpar_rc != H_Success) {
+ if(lpar_rc != H_SUCCESS) {
pool->free_map[free_index] = index;
pool->skbuff[index] = NULL;
pool->consumer_index--;
@@ -373,7 +373,7 @@
lpar_rc = h_add_logical_lan_buffer(adapter->vdev->unit_address, desc.desc);
- if(lpar_rc != H_Success) {
+ if(lpar_rc != H_SUCCESS) {
ibmveth_debug_printk("h_add_logical_lan_buffer failed during recycle rc=%ld", lpar_rc);
ibmveth_remove_buffer_from_pool(adapter, adapter->rx_queue.queue_addr[adapter->rx_queue.index].correlator);
}
@@ -511,7 +511,7 @@
adapter->filter_list_dma,
mac_address);
- if(lpar_rc != H_Success) {
+ if(lpar_rc != H_SUCCESS) {
ibmveth_error_printk("h_register_logical_lan failed with %ld\n", lpar_rc);
ibmveth_error_printk("buffer TCE:0x%lx filter TCE:0x%lx rxq desc:0x%lx MAC:0x%lx\n",
adapter->buffer_list_dma,
@@ -527,7 +527,7 @@
ibmveth_error_printk("unable to request irq 0x%x, rc %d\n", netdev->irq, rc);
do {
rc = h_free_logical_lan(adapter->vdev->unit_address);
- } while (H_isLongBusy(rc) || (rc == H_Busy));
+ } while (H_IS_LONG_BUSY(rc) || (rc == H_BUSY));
ibmveth_cleanup(adapter);
return rc;
@@ -556,9 +556,9 @@
do {
lpar_rc = h_free_logical_lan(adapter->vdev->unit_address);
- } while (H_isLongBusy(lpar_rc) || (lpar_rc == H_Busy));
+ } while (H_IS_LONG_BUSY(lpar_rc) || (lpar_rc == H_BUSY));
- if(lpar_rc != H_Success)
+ if(lpar_rc != H_SUCCESS)
{
ibmveth_error_printk("h_free_logical_lan failed with %lx, continuing with close\n",
lpar_rc);
@@ -693,9 +693,9 @@
desc[4].desc,
desc[5].desc,
correlator);
- } while ((lpar_rc == H_Busy) && (retry_count--));
+ } while ((lpar_rc == H_BUSY) && (retry_count--));
- if(lpar_rc != H_Success && lpar_rc != H_Dropped) {
+ if(lpar_rc != H_SUCCESS && lpar_rc != H_DROPPED) {
int i;
ibmveth_error_printk("tx: h_send_logical_lan failed with rc=%ld\n", lpar_rc);
for(i = 0; i < 6; i++) {
@@ -786,14 +786,14 @@
/* we think we are done - reenable interrupts, then check once more to make sure we are done */
lpar_rc = h_vio_signal(adapter->vdev->unit_address, VIO_IRQ_ENABLE);
- ibmveth_assert(lpar_rc == H_Success);
+ ibmveth_assert(lpar_rc == H_SUCCESS);
netif_rx_complete(netdev);
if(ibmveth_rxq_pending_buffer(adapter) && netif_rx_reschedule(netdev, frames_processed))
{
lpar_rc = h_vio_signal(adapter->vdev->unit_address, VIO_IRQ_DISABLE);
- ibmveth_assert(lpar_rc == H_Success);
+ ibmveth_assert(lpar_rc == H_SUCCESS);
more_work = 1;
goto restart_poll;
}
@@ -813,7 +813,7 @@
if(netif_rx_schedule_prep(netdev)) {
lpar_rc = h_vio_signal(adapter->vdev->unit_address, VIO_IRQ_DISABLE);
- ibmveth_assert(lpar_rc == H_Success);
+ ibmveth_assert(lpar_rc == H_SUCCESS);
__netif_rx_schedule(netdev);
}
return IRQ_HANDLED;
@@ -835,7 +835,7 @@
IbmVethMcastEnableRecv |
IbmVethMcastDisableFiltering,
0);
- if(lpar_rc != H_Success) {
+ if(lpar_rc != H_SUCCESS) {
ibmveth_error_printk("h_multicast_ctrl rc=%ld when entering promisc mode\n", lpar_rc);
}
} else {
@@ -847,7 +847,7 @@
IbmVethMcastDisableFiltering |
IbmVethMcastClearFilterTable,
0);
- if(lpar_rc != H_Success) {
+ if(lpar_rc != H_SUCCESS) {
ibmveth_error_printk("h_multicast_ctrl rc=%ld when attempting to clear filter table\n", lpar_rc);
}
/* add the addresses to the filter table */
@@ -858,7 +858,7 @@
lpar_rc = h_multicast_ctrl(adapter->vdev->unit_address,
IbmVethMcastAddFilter,
mcast_addr);
- if(lpar_rc != H_Success) {
+ if(lpar_rc != H_SUCCESS) {
ibmveth_error_printk("h_multicast_ctrl rc=%ld when adding an entry to the filter table\n", lpar_rc);
}
}
@@ -867,7 +867,7 @@
lpar_rc = h_multicast_ctrl(adapter->vdev->unit_address,
IbmVethMcastEnableFiltering,
0);
- if(lpar_rc != H_Success) {
+ if(lpar_rc != H_SUCCESS) {
ibmveth_error_printk("h_multicast_ctrl rc=%ld when enabling filtering\n", lpar_rc);
}
}
diff --git a/drivers/scsi/ibmvscsi/rpa_vscsi.c b/drivers/scsi/ibmvscsi/rpa_vscsi.c
index f47dd87..892e8ed 100644
--- a/drivers/scsi/ibmvscsi/rpa_vscsi.c
+++ b/drivers/scsi/ibmvscsi/rpa_vscsi.c
@@ -80,7 +80,7 @@
tasklet_kill(&hostdata->srp_task);
do {
rc = plpar_hcall_norets(H_FREE_CRQ, vdev->unit_address);
- } while ((rc == H_Busy) || (H_isLongBusy(rc)));
+ } while ((rc == H_BUSY) || (H_IS_LONG_BUSY(rc)));
dma_unmap_single(hostdata->dev,
queue->msg_token,
queue->size * sizeof(*queue->msgs), DMA_BIDIRECTIONAL);
@@ -230,7 +230,7 @@
rc = plpar_hcall_norets(H_REG_CRQ,
vdev->unit_address,
queue->msg_token, PAGE_SIZE);
- if (rc == H_Resource)
+ if (rc == H_RESOURCE)
/* maybe kexecing and resource is busy. try a reset */
rc = ibmvscsi_reset_crq_queue(queue,
hostdata);
@@ -269,7 +269,7 @@
req_irq_failed:
do {
rc = plpar_hcall_norets(H_FREE_CRQ, vdev->unit_address);
- } while ((rc == H_Busy) || (H_isLongBusy(rc)));
+ } while ((rc == H_BUSY) || (H_IS_LONG_BUSY(rc)));
reg_crq_failed:
dma_unmap_single(hostdata->dev,
queue->msg_token,
@@ -295,7 +295,7 @@
/* Re-enable the CRQ */
do {
rc = plpar_hcall_norets(H_ENABLE_CRQ, vdev->unit_address);
- } while ((rc == H_InProgress) || (rc == H_Busy) || (H_isLongBusy(rc)));
+ } while ((rc == H_IN_PROGRESS) || (rc == H_BUSY) || (H_IS_LONG_BUSY(rc)));
if (rc)
printk(KERN_ERR "ibmvscsi: Error %d enabling adapter\n", rc);
@@ -317,7 +317,7 @@
/* Close the CRQ */
do {
rc = plpar_hcall_norets(H_FREE_CRQ, vdev->unit_address);
- } while ((rc == H_Busy) || (H_isLongBusy(rc)));
+ } while ((rc == H_BUSY) || (H_IS_LONG_BUSY(rc)));
/* Clean out the queue */
memset(queue->msgs, 0x00, PAGE_SIZE);
diff --git a/include/asm-powerpc/eeh.h b/include/asm-powerpc/eeh.h
index 5207758..868c713 100644
--- a/include/asm-powerpc/eeh.h
+++ b/include/asm-powerpc/eeh.h
@@ -60,24 +60,10 @@
* device (including config space i/o). Call eeh_add_device_late
* to finish the eeh setup for this device.
*/
-void eeh_add_device_early(struct device_node *);
-void eeh_add_device_late(struct pci_dev *dev);
void eeh_add_device_tree_early(struct device_node *);
void eeh_add_device_tree_late(struct pci_bus *);
/**
- * eeh_remove_device - undo EEH setup for the indicated pci device
- * @dev: pci device to be removed
- *
- * This routine should be called when a device is removed from
- * a running system (e.g. by hotplug or dlpar). It unregisters
- * the PCI device from the EEH subsystem. I/O errors affecting
- * this device will no longer be detected after this call; thus,
- * i/o errors affecting this slot may leave this device unusable.
- */
-void eeh_remove_device(struct pci_dev *);
-
-/**
* eeh_remove_device_recursive - undo EEH for device & children.
* @dev: pci device to be removed
*
@@ -116,12 +102,6 @@
static inline void pci_addr_cache_build(void) { }
-static inline void eeh_add_device_early(struct device_node *dn) { }
-
-static inline void eeh_add_device_late(struct pci_dev *dev) { }
-
-static inline void eeh_remove_device(struct pci_dev *dev) { }
-
static inline void eeh_add_device_tree_early(struct device_node *dn) { }
static inline void eeh_add_device_tree_late(struct pci_bus *bus) { }
diff --git a/include/asm-powerpc/hvcall.h b/include/asm-powerpc/hvcall.h
index b72c04f..6cc7e1f 100644
--- a/include/asm-powerpc/hvcall.h
+++ b/include/asm-powerpc/hvcall.h
@@ -4,47 +4,88 @@
#define HVSC .long 0x44000022
-#define H_Success 0
-#define H_Busy 1 /* Hardware busy -- retry later */
-#define H_Closed 2 /* Resource closed */
-#define H_Constrained 4 /* Resource request constrained to max allowed */
-#define H_InProgress 14 /* Kind of like busy */
-#define H_Pending 17 /* returned from H_POLL_PENDING */
-#define H_Continue 18 /* Returned from H_Join on success */
-#define H_LongBusyStartRange 9900 /* Start of long busy range */
-#define H_LongBusyOrder1msec 9900 /* Long busy, hint that 1msec is a good time to retry */
-#define H_LongBusyOrder10msec 9901 /* Long busy, hint that 10msec is a good time to retry */
-#define H_LongBusyOrder100msec 9902 /* Long busy, hint that 100msec is a good time to retry */
-#define H_LongBusyOrder1sec 9903 /* Long busy, hint that 1sec is a good time to retry */
-#define H_LongBusyOrder10sec 9904 /* Long busy, hint that 10sec is a good time to retry */
-#define H_LongBusyOrder100sec 9905 /* Long busy, hint that 100sec is a good time to retry */
-#define H_LongBusyEndRange 9905 /* End of long busy range */
-#define H_Hardware -1 /* Hardware error */
-#define H_Function -2 /* Function not supported */
-#define H_Privilege -3 /* Caller not privileged */
-#define H_Parameter -4 /* Parameter invalid, out-of-range or conflicting */
-#define H_Bad_Mode -5 /* Illegal msr value */
-#define H_PTEG_Full -6 /* PTEG is full */
-#define H_Not_Found -7 /* PTE was not found" */
-#define H_Reserved_DABR -8 /* DABR address is reserved by the hypervisor on this processor" */
-#define H_NoMem -9
-#define H_Authority -10
-#define H_Permission -11
-#define H_Dropped -12
-#define H_SourceParm -13
-#define H_DestParm -14
-#define H_RemoteParm -15
-#define H_Resource -16
+#define H_SUCCESS 0
+#define H_BUSY 1 /* Hardware busy -- retry later */
+#define H_CLOSED 2 /* Resource closed */
+#define H_NOT_AVAILABLE 3
+#define H_CONSTRAINED 4 /* Resource request constrained to max allowed */
+#define H_PARTIAL 5
+#define H_IN_PROGRESS 14 /* Kind of like busy */
+#define H_PAGE_REGISTERED 15
+#define H_PARTIAL_STORE 16
+#define H_PENDING 17 /* returned from H_POLL_PENDING */
+#define H_CONTINUE 18 /* Returned from H_Join on success */
+#define H_LONG_BUSY_START_RANGE 9900 /* Start of long busy range */
+#define H_LONG_BUSY_ORDER_1_MSEC 9900 /* Long busy, hint that 1msec \
+ is a good time to retry */
+#define H_LONG_BUSY_ORDER_10_MSEC 9901 /* Long busy, hint that 10msec \
+ is a good time to retry */
+#define H_LONG_BUSY_ORDER_100_MSEC 9902 /* Long busy, hint that 100msec \
+ is a good time to retry */
+#define H_LONG_BUSY_ORDER_1_SEC 9903 /* Long busy, hint that 1sec \
+ is a good time to retry */
+#define H_LONG_BUSY_ORDER_10_SEC 9904 /* Long busy, hint that 10sec \
+ is a good time to retry */
+#define H_LONG_BUSY_ORDER_100_SEC 9905 /* Long busy, hint that 100sec \
+ is a good time to retry */
+#define H_LONG_BUSY_END_RANGE 9905 /* End of long busy range */
+#define H_HARDWARE -1 /* Hardware error */
+#define H_FUNCTION -2 /* Function not supported */
+#define H_PRIVILEGE -3 /* Caller not privileged */
+#define H_PARAMETER -4 /* Parameter invalid, out-of-range or conflicting */
+#define H_BAD_MODE -5 /* Illegal msr value */
+#define H_PTEG_FULL -6 /* PTEG is full */
+#define H_NOT_FOUND -7 /* PTE was not found" */
+#define H_RESERVED_DABR -8 /* DABR address is reserved by the hypervisor on this processor" */
+#define H_NO_MEM -9
+#define H_AUTHORITY -10
+#define H_PERMISSION -11
+#define H_DROPPED -12
+#define H_SOURCE_PARM -13
+#define H_DEST_PARM -14
+#define H_REMOTE_PARM -15
+#define H_RESOURCE -16
+#define H_ADAPTER_PARM -17
+#define H_RH_PARM -18
+#define H_RCQ_PARM -19
+#define H_SCQ_PARM -20
+#define H_EQ_PARM -21
+#define H_RT_PARM -22
+#define H_ST_PARM -23
+#define H_SIGT_PARM -24
+#define H_TOKEN_PARM -25
+#define H_MLENGTH_PARM -27
+#define H_MEM_PARM -28
+#define H_MEM_ACCESS_PARM -29
+#define H_ATTR_PARM -30
+#define H_PORT_PARM -31
+#define H_MCG_PARM -32
+#define H_VL_PARM -33
+#define H_TSIZE_PARM -34
+#define H_TRACE_PARM -35
+
+#define H_MASK_PARM -37
+#define H_MCG_FULL -38
+#define H_ALIAS_EXIST -39
+#define H_P_COUNTER -40
+#define H_TABLE_FULL -41
+#define H_ALT_TABLE -42
+#define H_MR_CONDITION -43
+#define H_NOT_ENOUGH_RESOURCES -44
+#define H_R_STATE -45
+#define H_RESCINDEND -46
+
/* Long Busy is a condition that can be returned by the firmware
* when a call cannot be completed now, but the identical call
* should be retried later. This prevents calls blocking in the
- * firmware for long periods of time. Annoyingly the firmware can return
+ * firmware for long periods of time. Annoyingly the firmware can return
* a range of return codes, hinting at how long we should wait before
* retrying. If you don't care for the hint, the macro below is a good
* way to check for the long_busy return codes
*/
-#define H_isLongBusy(x) ((x >= H_LongBusyStartRange) && (x <= H_LongBusyEndRange))
+#define H_IS_LONG_BUSY(x) ((x >= H_LONG_BUSY_START_RANGE) \
+ && (x <= H_LONG_BUSY_END_RANGE))
/* Flags */
#define H_LARGE_PAGE (1UL<<(63-16))
@@ -66,6 +107,9 @@
#define H_DABRX_KERNEL (1UL<<(63-62))
#define H_DABRX_USER (1UL<<(63-63))
+/* Each control block has to be on a 4K bondary */
+#define H_CB_ALIGNMENT 4096
+
/* pSeries hypervisor opcodes */
#define H_REMOVE 0x04
#define H_ENTER 0x08
@@ -99,25 +143,52 @@
#define H_PERFMON 0x7c
#define H_MIGRATE_DMA 0x78
#define H_REGISTER_VPA 0xDC
-#define H_CEDE 0xE0
+#define H_CEDE 0xE0
#define H_CONFER 0xE4
-#define H_PROD 0xE8
+#define H_PROD 0xE8
#define H_GET_PPP 0xEC
#define H_SET_PPP 0xF0
#define H_PURR 0xF4
-#define H_PIC 0xF8
+#define H_PIC 0xF8
#define H_REG_CRQ 0xFC
#define H_FREE_CRQ 0x100
#define H_VIO_SIGNAL 0x104
#define H_SEND_CRQ 0x108
-#define H_COPY_RDMA 0x110
+#define H_COPY_RDMA 0x110
#define H_SET_XDABR 0x134
#define H_STUFF_TCE 0x138
#define H_PUT_TCE_INDIRECT 0x13C
#define H_VTERM_PARTNER_INFO 0x150
#define H_REGISTER_VTERM 0x154
#define H_FREE_VTERM 0x158
-#define H_POLL_PENDING 0x1D8
+#define H_RESET_EVENTS 0x15C
+#define H_ALLOC_RESOURCE 0x160
+#define H_FREE_RESOURCE 0x164
+#define H_MODIFY_QP 0x168
+#define H_QUERY_QP 0x16C
+#define H_REREGISTER_PMR 0x170
+#define H_REGISTER_SMR 0x174
+#define H_QUERY_MR 0x178
+#define H_QUERY_MW 0x17C
+#define H_QUERY_HCA 0x180
+#define H_QUERY_PORT 0x184
+#define H_MODIFY_PORT 0x188
+#define H_DEFINE_AQP1 0x18C
+#define H_GET_TRACE_BUFFER 0x190
+#define H_DEFINE_AQP0 0x194
+#define H_RESIZE_MR 0x198
+#define H_ATTACH_MCQP 0x19C
+#define H_DETACH_MCQP 0x1A0
+#define H_CREATE_RPT 0x1A4
+#define H_REMOVE_RPT 0x1A8
+#define H_REGISTER_RPAGES 0x1AC
+#define H_DISABLE_AND_GETC 0x1B0
+#define H_ERROR_DATA 0x1B4
+#define H_GET_HCA_INFO 0x1B8
+#define H_GET_PERF_COUNT 0x1BC
+#define H_MANAGE_TRACE 0x1C0
+#define H_QUERY_INT_STATE 0x1E4
+#define H_POLL_PENDING 0x1D8
#define H_JOIN 0x298
#define H_ENABLE_CRQ 0x2B0
@@ -152,7 +223,7 @@
*/
long plpar_hcall_8arg_2ret(unsigned long opcode,
unsigned long arg1,
- unsigned long arg2,
+ unsigned long arg2,
unsigned long arg3,
unsigned long arg4,
unsigned long arg5,
@@ -176,6 +247,42 @@
unsigned long *out3,
unsigned long *out4);
+long plpar_hcall_7arg_7ret(unsigned long opcode,
+ unsigned long arg1,
+ unsigned long arg2,
+ unsigned long arg3,
+ unsigned long arg4,
+ unsigned long arg5,
+ unsigned long arg6,
+ unsigned long arg7,
+ unsigned long *out1,
+ unsigned long *out2,
+ unsigned long *out3,
+ unsigned long *out4,
+ unsigned long *out5,
+ unsigned long *out6,
+ unsigned long *out7);
+
+long plpar_hcall_9arg_9ret(unsigned long opcode,
+ unsigned long arg1,
+ unsigned long arg2,
+ unsigned long arg3,
+ unsigned long arg4,
+ unsigned long arg5,
+ unsigned long arg6,
+ unsigned long arg7,
+ unsigned long arg8,
+ unsigned long arg9,
+ unsigned long *out1,
+ unsigned long *out2,
+ unsigned long *out3,
+ unsigned long *out4,
+ unsigned long *out5,
+ unsigned long *out6,
+ unsigned long *out7,
+ unsigned long *out8,
+ unsigned long *out9);
+
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_HVCALL_H */