| /* |
| * Copyright (c) 2012, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #define pr_fmt(fmt) "%s: " fmt, __func__ |
| |
| #include <linux/module.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/string.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/bitops.h> |
| #include <linux/slab.h> |
| #include <linux/spmi.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/of_regulator.h> |
| #include <linux/regulator/qpnp-regulator.h> |
| |
| /* Debug Flag Definitions */ |
| enum { |
| QPNP_VREG_DEBUG_REQUEST = BIT(0), /* Show requests */ |
| QPNP_VREG_DEBUG_DUPLICATE = BIT(1), /* Show duplicate requests */ |
| QPNP_VREG_DEBUG_INIT = BIT(2), /* Show state after probe */ |
| QPNP_VREG_DEBUG_WRITES = BIT(3), /* Show SPMI writes */ |
| QPNP_VREG_DEBUG_READS = BIT(4), /* Show SPMI reads */ |
| }; |
| |
| static int qpnp_vreg_debug_mask; |
| module_param_named( |
| debug_mask, qpnp_vreg_debug_mask, int, S_IRUSR | S_IWUSR |
| ); |
| |
| #define vreg_err(vreg, fmt, ...) \ |
| pr_err("%s: " fmt, vreg->rdesc.name, ##__VA_ARGS__) |
| |
| /* These types correspond to unique register layouts. */ |
| enum qpnp_regulator_logical_type { |
| QPNP_REGULATOR_LOGICAL_TYPE_SMPS, |
| QPNP_REGULATOR_LOGICAL_TYPE_LDO, |
| QPNP_REGULATOR_LOGICAL_TYPE_VS, |
| QPNP_REGULATOR_LOGICAL_TYPE_BOOST, |
| QPNP_REGULATOR_LOGICAL_TYPE_FTSMPS, |
| }; |
| |
| enum qpnp_regulator_type { |
| QPNP_REGULATOR_TYPE_BUCK = 0x03, |
| QPNP_REGULATOR_TYPE_LDO = 0x04, |
| QPNP_REGULATOR_TYPE_VS = 0x05, |
| QPNP_REGULATOR_TYPE_BOOST = 0x1B, |
| QPNP_REGULATOR_TYPE_FTS = 0x1C, |
| }; |
| |
| enum qpnp_regulator_subtype { |
| QPNP_REGULATOR_SUBTYPE_GP_CTL = 0x08, |
| QPNP_REGULATOR_SUBTYPE_RF_CTL = 0x09, |
| QPNP_REGULATOR_SUBTYPE_N50 = 0x01, |
| QPNP_REGULATOR_SUBTYPE_N150 = 0x02, |
| QPNP_REGULATOR_SUBTYPE_N300 = 0x03, |
| QPNP_REGULATOR_SUBTYPE_N600 = 0x04, |
| QPNP_REGULATOR_SUBTYPE_N1200 = 0x05, |
| QPNP_REGULATOR_SUBTYPE_N600_ST = 0x06, |
| QPNP_REGULATOR_SUBTYPE_N1200_ST = 0x07, |
| QPNP_REGULATOR_SUBTYPE_P50 = 0x08, |
| QPNP_REGULATOR_SUBTYPE_P150 = 0x09, |
| QPNP_REGULATOR_SUBTYPE_P300 = 0x0A, |
| QPNP_REGULATOR_SUBTYPE_P600 = 0x0B, |
| QPNP_REGULATOR_SUBTYPE_P1200 = 0x0C, |
| QPNP_REGULATOR_SUBTYPE_LV_P50 = 0x28, |
| QPNP_REGULATOR_SUBTYPE_LV_P150 = 0x29, |
| QPNP_REGULATOR_SUBTYPE_LV_P300 = 0x2A, |
| QPNP_REGULATOR_SUBTYPE_LV_P600 = 0x2B, |
| QPNP_REGULATOR_SUBTYPE_LV_P1200 = 0x2C, |
| QPNP_REGULATOR_SUBTYPE_LV100 = 0x01, |
| QPNP_REGULATOR_SUBTYPE_LV300 = 0x02, |
| QPNP_REGULATOR_SUBTYPE_MV300 = 0x08, |
| QPNP_REGULATOR_SUBTYPE_MV500 = 0x09, |
| QPNP_REGULATOR_SUBTYPE_HDMI = 0x10, |
| QPNP_REGULATOR_SUBTYPE_OTG = 0x11, |
| QPNP_REGULATOR_SUBTYPE_5V_BOOST = 0x01, |
| QPNP_REGULATOR_SUBTYPE_FTS_CTL = 0x08, |
| }; |
| |
| enum qpnp_common_regulator_registers { |
| QPNP_COMMON_REG_DIG_MAJOR_REV = 0x01, |
| QPNP_COMMON_REG_TYPE = 0x04, |
| QPNP_COMMON_REG_SUBTYPE = 0x05, |
| QPNP_COMMON_REG_VOLTAGE_RANGE = 0x40, |
| QPNP_COMMON_REG_VOLTAGE_SET = 0x41, |
| QPNP_COMMON_REG_MODE = 0x45, |
| QPNP_COMMON_REG_ENABLE = 0x46, |
| QPNP_COMMON_REG_PULL_DOWN = 0x48, |
| }; |
| |
| enum qpnp_ldo_registers { |
| QPNP_LDO_REG_SOFT_START = 0x4C, |
| }; |
| |
| enum qpnp_vs_registers { |
| QPNP_VS_REG_OCP = 0x4A, |
| QPNP_VS_REG_SOFT_START = 0x4C, |
| }; |
| |
| enum qpnp_boost_registers { |
| QPNP_BOOST_REG_CURRENT_LIMIT = 0x4A, |
| }; |
| |
| /* Used for indexing into ctrl_reg. These are offets from 0x40 */ |
| enum qpnp_common_control_register_index { |
| QPNP_COMMON_IDX_VOLTAGE_RANGE = 0, |
| QPNP_COMMON_IDX_VOLTAGE_SET = 1, |
| QPNP_COMMON_IDX_MODE = 5, |
| QPNP_COMMON_IDX_ENABLE = 6, |
| }; |
| |
| /* Common regulator control register layout */ |
| #define QPNP_COMMON_ENABLE_MASK 0x80 |
| #define QPNP_COMMON_ENABLE 0x80 |
| #define QPNP_COMMON_DISABLE 0x00 |
| #define QPNP_COMMON_ENABLE_FOLLOW_HW_EN3_MASK 0x08 |
| #define QPNP_COMMON_ENABLE_FOLLOW_HW_EN2_MASK 0x04 |
| #define QPNP_COMMON_ENABLE_FOLLOW_HW_EN1_MASK 0x02 |
| #define QPNP_COMMON_ENABLE_FOLLOW_HW_EN0_MASK 0x01 |
| #define QPNP_COMMON_ENABLE_FOLLOW_ALL_MASK 0x0F |
| |
| /* Common regulator mode register layout */ |
| #define QPNP_COMMON_MODE_HPM_MASK 0x80 |
| #define QPNP_COMMON_MODE_AUTO_MASK 0x40 |
| #define QPNP_COMMON_MODE_BYPASS_MASK 0x20 |
| #define QPNP_COMMON_MODE_FOLLOW_AWAKE_MASK 0x10 |
| #define QPNP_COMMON_MODE_FOLLOW_HW_EN3_MASK 0x08 |
| #define QPNP_COMMON_MODE_FOLLOW_HW_EN2_MASK 0x04 |
| #define QPNP_COMMON_MODE_FOLLOW_HW_EN1_MASK 0x02 |
| #define QPNP_COMMON_MODE_FOLLOW_HW_EN0_MASK 0x01 |
| #define QPNP_COMMON_MODE_FOLLOW_ALL_MASK 0x1F |
| |
| /* Common regulator pull down control register layout */ |
| #define QPNP_COMMON_PULL_DOWN_ENABLE_MASK 0x80 |
| |
| /* LDO regulator current limit control register layout */ |
| #define QPNP_LDO_CURRENT_LIMIT_ENABLE_MASK 0x80 |
| |
| /* LDO regulator soft start control register layout */ |
| #define QPNP_LDO_SOFT_START_ENABLE_MASK 0x80 |
| |
| /* VS regulator over current protection control register layout */ |
| #define QPNP_VS_OCP_ENABLE_MASK 0x80 |
| #define QPNP_VS_OCP_OVERRIDE_MASK 0x01 |
| #define QPNP_VS_OCP_DISABLE 0x00 |
| |
| /* VS regulator soft start control register layout */ |
| #define QPNP_VS_SOFT_START_ENABLE_MASK 0x80 |
| #define QPNP_VS_SOFT_START_SEL_MASK 0x03 |
| |
| /* Boost regulator current limit control register layout */ |
| #define QPNP_BOOST_CURRENT_LIMIT_ENABLE_MASK 0x80 |
| #define QPNP_BOOST_CURRENT_LIMIT_MASK 0x07 |
| |
| /* |
| * This voltage in uV is returned by get_voltage functions when there is no way |
| * to determine the current voltage level. It is needed because the regulator |
| * framework treats a 0 uV voltage as an error. |
| */ |
| #define VOLTAGE_UNKNOWN 1 |
| |
| struct qpnp_voltage_range { |
| int min_uV; |
| int max_uV; |
| int step_uV; |
| int set_point_min_uV; |
| unsigned n_voltages; |
| u8 range_sel; |
| }; |
| |
| struct qpnp_voltage_set_points { |
| struct qpnp_voltage_range *range; |
| int count; |
| unsigned n_voltages; |
| }; |
| |
| struct qpnp_regulator_mapping { |
| enum qpnp_regulator_type type; |
| enum qpnp_regulator_subtype subtype; |
| enum qpnp_regulator_logical_type logical_type; |
| u32 revision_min; |
| u32 revision_max; |
| struct regulator_ops *ops; |
| struct qpnp_voltage_set_points *set_points; |
| int hpm_min_load; |
| }; |
| |
| struct qpnp_regulator { |
| struct regulator_desc rdesc; |
| struct spmi_device *spmi_dev; |
| struct regulator_dev *rdev; |
| struct qpnp_voltage_set_points *set_points; |
| enum qpnp_regulator_logical_type logical_type; |
| int enable_time; |
| int ocp_enable_time; |
| int ocp_enable; |
| int system_load; |
| int hpm_min_load; |
| u32 write_count; |
| u32 prev_write_count; |
| u16 base_addr; |
| /* ctrl_reg provides a shadow copy of register values 0x40 to 0x47. */ |
| u8 ctrl_reg[8]; |
| }; |
| |
| #define QPNP_VREG_MAP(_type, _subtype, _dig_major_min, _dig_major_max, \ |
| _logical_type, _ops_val, _set_points_val, _hpm_min_load) \ |
| { \ |
| .type = QPNP_REGULATOR_TYPE_##_type, \ |
| .subtype = QPNP_REGULATOR_SUBTYPE_##_subtype, \ |
| .revision_min = _dig_major_min, \ |
| .revision_max = _dig_major_max, \ |
| .logical_type = QPNP_REGULATOR_LOGICAL_TYPE_##_logical_type, \ |
| .ops = &qpnp_##_ops_val##_ops, \ |
| .set_points = &_set_points_val##_set_points, \ |
| .hpm_min_load = _hpm_min_load, \ |
| } |
| |
| #define VOLTAGE_RANGE(_range_sel, _min_uV, _set_point_min_uV, _max_uV, \ |
| _step_uV) \ |
| { \ |
| .min_uV = _min_uV, \ |
| .set_point_min_uV = _set_point_min_uV, \ |
| .max_uV = _max_uV, \ |
| .step_uV = _step_uV, \ |
| .range_sel = _range_sel, \ |
| } |
| |
| #define SET_POINTS(_ranges) \ |
| { \ |
| .range = _ranges, \ |
| .count = ARRAY_SIZE(_ranges), \ |
| }; |
| |
| /* |
| * These tables contain the physically available PMIC regulator voltage setpoint |
| * ranges. Where two ranges overlap in hardware, one of the ranges is trimmed |
| * to ensure that the setpoints available to software are monotonically |
| * increasing and unique. The set_voltage callback functions expect these |
| * properties to hold. |
| */ |
| static struct qpnp_voltage_range pldo_ranges[] = { |
| VOLTAGE_RANGE(2, 750000, 750000, 1537500, 12500), |
| VOLTAGE_RANGE(3, 1500000, 1550000, 3075000, 25000), |
| VOLTAGE_RANGE(4, 1750000, 3100000, 4900000, 50000), |
| }; |
| |
| static struct qpnp_voltage_range nldo1_ranges[] = { |
| VOLTAGE_RANGE(2, 750000, 750000, 1537500, 12500), |
| }; |
| |
| static struct qpnp_voltage_range nldo2_ranges[] = { |
| VOLTAGE_RANGE(1, 375000, 375000, 768750, 6250), |
| VOLTAGE_RANGE(2, 750000, 775000, 1537500, 12500), |
| }; |
| |
| static struct qpnp_voltage_range nldo3_ranges[] = { |
| VOLTAGE_RANGE(0, 375000, 375000, 1537500, 12500), |
| }; |
| |
| static struct qpnp_voltage_range smps_ranges[] = { |
| VOLTAGE_RANGE(0, 375000, 375000, 1562500, 12500), |
| VOLTAGE_RANGE(1, 1550000, 1575000, 3125000, 25000), |
| }; |
| |
| static struct qpnp_voltage_range ftsmps_ranges[] = { |
| VOLTAGE_RANGE(0, 0, 350000, 1275000, 5000), |
| VOLTAGE_RANGE(1, 0, 1280000, 2040000, 10000), |
| }; |
| |
| static struct qpnp_voltage_range boost_ranges[] = { |
| VOLTAGE_RANGE(0, 4000000, 4000000, 5550000, 50000), |
| }; |
| |
| static struct qpnp_voltage_set_points pldo_set_points = SET_POINTS(pldo_ranges); |
| static struct qpnp_voltage_set_points nldo1_set_points |
| = SET_POINTS(nldo1_ranges); |
| static struct qpnp_voltage_set_points nldo2_set_points |
| = SET_POINTS(nldo2_ranges); |
| static struct qpnp_voltage_set_points nldo3_set_points |
| = SET_POINTS(nldo3_ranges); |
| static struct qpnp_voltage_set_points smps_set_points = SET_POINTS(smps_ranges); |
| static struct qpnp_voltage_set_points ftsmps_set_points |
| = SET_POINTS(ftsmps_ranges); |
| static struct qpnp_voltage_set_points boost_set_points |
| = SET_POINTS(boost_ranges); |
| static struct qpnp_voltage_set_points none_set_points; |
| |
| static struct qpnp_voltage_set_points *all_set_points[] = { |
| &pldo_set_points, |
| &nldo1_set_points, |
| &nldo2_set_points, |
| &nldo3_set_points, |
| &smps_set_points, |
| &ftsmps_set_points, |
| &boost_set_points, |
| }; |
| |
| /* Determines which label to add to a debug print statement. */ |
| enum qpnp_regulator_action { |
| QPNP_REGULATOR_ACTION_INIT, |
| QPNP_REGULATOR_ACTION_ENABLE, |
| QPNP_REGULATOR_ACTION_DISABLE, |
| QPNP_REGULATOR_ACTION_VOLTAGE, |
| QPNP_REGULATOR_ACTION_MODE, |
| }; |
| |
| static void qpnp_vreg_show_state(struct regulator_dev *rdev, |
| enum qpnp_regulator_action action); |
| |
| #define DEBUG_PRINT_BUFFER_SIZE 64 |
| static void fill_string(char *str, size_t str_len, u8 *buf, int buf_len) |
| { |
| int pos = 0; |
| int i; |
| |
| for (i = 0; i < buf_len; i++) { |
| pos += scnprintf(str + pos, str_len - pos, "0x%02X", buf[i]); |
| if (i < buf_len - 1) |
| pos += scnprintf(str + pos, str_len - pos, ", "); |
| } |
| } |
| |
| static inline int qpnp_vreg_read(struct qpnp_regulator *vreg, u16 addr, u8 *buf, |
| int len) |
| { |
| char str[DEBUG_PRINT_BUFFER_SIZE]; |
| int rc = 0; |
| |
| rc = spmi_ext_register_readl(vreg->spmi_dev->ctrl, vreg->spmi_dev->sid, |
| vreg->base_addr + addr, buf, len); |
| |
| if (!rc && (qpnp_vreg_debug_mask & QPNP_VREG_DEBUG_READS)) { |
| str[0] = '\0'; |
| fill_string(str, DEBUG_PRINT_BUFFER_SIZE, buf, len); |
| pr_info(" %-11s: read(0x%04X), sid=%d, len=%d; %s\n", |
| vreg->rdesc.name, vreg->base_addr + addr, |
| vreg->spmi_dev->sid, len, str); |
| } |
| |
| return rc; |
| } |
| |
| static inline int qpnp_vreg_write(struct qpnp_regulator *vreg, u16 addr, |
| u8 *buf, int len) |
| { |
| char str[DEBUG_PRINT_BUFFER_SIZE]; |
| int rc = 0; |
| |
| if (qpnp_vreg_debug_mask & QPNP_VREG_DEBUG_WRITES) { |
| str[0] = '\0'; |
| fill_string(str, DEBUG_PRINT_BUFFER_SIZE, buf, len); |
| pr_info("%-11s: write(0x%04X), sid=%d, len=%d; %s\n", |
| vreg->rdesc.name, vreg->base_addr + addr, |
| vreg->spmi_dev->sid, len, str); |
| } |
| |
| rc = spmi_ext_register_writel(vreg->spmi_dev->ctrl, |
| vreg->spmi_dev->sid, vreg->base_addr + addr, buf, len); |
| if (!rc) |
| vreg->write_count += len; |
| |
| return rc; |
| } |
| |
| /* |
| * qpnp_vreg_write_optimized - write the minimum sized contiguous subset of buf |
| * @vreg: qpnp_regulator pointer for this regulator |
| * @addr: local SPMI address offset from this peripheral's base address |
| * @buf: new data to write into the SPMI registers |
| * @buf_save: old data in the registers |
| * @len: number of bytes to write |
| * |
| * This function checks for unchanged register values between buf and buf_save |
| * starting at both ends of buf. Only the contiguous subset in the middle of |
| * buf starting and ending with new values is sent. |
| * |
| * Consider the following example: |
| * buf offset: 0 1 2 3 4 5 6 7 |
| * reg state: U U C C U C U U |
| * (U = unchanged, C = changed) |
| * In this example registers 2 through 5 will be written with a single |
| * transaction. |
| */ |
| static inline int qpnp_vreg_write_optimized(struct qpnp_regulator *vreg, |
| u16 addr, u8 *buf, u8 *buf_save, int len) |
| { |
| int i, rc, start, end; |
| |
| for (i = 0; i < len; i++) |
| if (buf[i] != buf_save[i]) |
| break; |
| start = i; |
| |
| for (i = len - 1; i >= 0; i--) |
| if (buf[i] != buf_save[i]) |
| break; |
| end = i; |
| |
| if (start > end) { |
| /* No modified register values present. */ |
| return 0; |
| } |
| |
| rc = qpnp_vreg_write(vreg, addr + start, &buf[start], end - start + 1); |
| if (!rc) |
| for (i = start; i <= end; i++) |
| buf_save[i] = buf[i]; |
| |
| return rc; |
| } |
| |
| /* |
| * Perform a masked write to a PMIC register only if the new value differs |
| * from the last value written to the register. This removes redundant |
| * register writing. |
| */ |
| static int qpnp_vreg_masked_write(struct qpnp_regulator *vreg, u16 addr, u8 val, |
| u8 mask, u8 *reg_save) |
| { |
| int rc = 0; |
| u8 reg; |
| |
| reg = (*reg_save & ~mask) | (val & mask); |
| if (reg != *reg_save) { |
| rc = qpnp_vreg_write(vreg, addr, ®, 1); |
| |
| if (rc) { |
| vreg_err(vreg, "write failed; addr=0x%03X, rc=%d\n", |
| addr, rc); |
| } else { |
| *reg_save = reg; |
| } |
| } |
| |
| return rc; |
| } |
| |
| /* |
| * Perform a masked read-modify-write to a PMIC register only if the new value |
| * differs from the value currently in the register. This removes redundant |
| * register writing. |
| */ |
| static int qpnp_vreg_masked_read_write(struct qpnp_regulator *vreg, u16 addr, |
| u8 val, u8 mask) |
| { |
| int rc; |
| u8 reg; |
| |
| rc = qpnp_vreg_read(vreg, addr, ®, 1); |
| if (rc) { |
| vreg_err(vreg, "read failed; addr=0x%03X, rc=%d\n", addr, rc); |
| return rc; |
| } |
| |
| return qpnp_vreg_masked_write(vreg, addr, val, mask, ®); |
| } |
| |
| static int qpnp_regulator_common_is_enabled(struct regulator_dev *rdev) |
| { |
| struct qpnp_regulator *vreg = rdev_get_drvdata(rdev); |
| |
| return (vreg->ctrl_reg[QPNP_COMMON_IDX_ENABLE] |
| & QPNP_COMMON_ENABLE_MASK) |
| == QPNP_COMMON_ENABLE; |
| } |
| |
| static int qpnp_regulator_common_enable(struct regulator_dev *rdev) |
| { |
| struct qpnp_regulator *vreg = rdev_get_drvdata(rdev); |
| int rc; |
| |
| rc = qpnp_vreg_masked_write(vreg, QPNP_COMMON_REG_ENABLE, |
| QPNP_COMMON_ENABLE, QPNP_COMMON_ENABLE_MASK, |
| &vreg->ctrl_reg[QPNP_COMMON_IDX_ENABLE]); |
| |
| if (rc) |
| vreg_err(vreg, "qpnp_vreg_masked_write failed, rc=%d\n", rc); |
| else |
| qpnp_vreg_show_state(rdev, QPNP_REGULATOR_ACTION_ENABLE); |
| |
| return rc; |
| } |
| |
| static int qpnp_regulator_vs_enable(struct regulator_dev *rdev) |
| { |
| struct qpnp_regulator *vreg = rdev_get_drvdata(rdev); |
| int rc; |
| u8 reg; |
| |
| if (vreg->ocp_enable == QPNP_REGULATOR_ENABLE) { |
| /* Disable OCP */ |
| reg = QPNP_VS_OCP_DISABLE; |
| rc = qpnp_vreg_write(vreg, QPNP_VS_REG_OCP, ®, 1); |
| if (rc) |
| goto fail; |
| } |
| |
| rc = qpnp_regulator_common_enable(rdev); |
| if (rc) |
| goto fail; |
| |
| if (vreg->ocp_enable == QPNP_REGULATOR_ENABLE) { |
| /* Wait for inrush current to subsided, then enable OCP. */ |
| udelay(vreg->ocp_enable_time); |
| reg = QPNP_VS_OCP_ENABLE_MASK; |
| rc = qpnp_vreg_write(vreg, QPNP_VS_REG_OCP, ®, 1); |
| if (rc) |
| goto fail; |
| } |
| |
| return rc; |
| fail: |
| vreg_err(vreg, "qpnp_vreg_write failed, rc=%d\n", rc); |
| |
| return rc; |
| } |
| |
| static int qpnp_regulator_common_disable(struct regulator_dev *rdev) |
| { |
| struct qpnp_regulator *vreg = rdev_get_drvdata(rdev); |
| int rc; |
| |
| rc = qpnp_vreg_masked_write(vreg, QPNP_COMMON_REG_ENABLE, |
| QPNP_COMMON_DISABLE, QPNP_COMMON_ENABLE_MASK, |
| &vreg->ctrl_reg[QPNP_COMMON_IDX_ENABLE]); |
| |
| if (rc) |
| vreg_err(vreg, "qpnp_vreg_masked_write failed, rc=%d\n", rc); |
| else |
| qpnp_vreg_show_state(rdev, QPNP_REGULATOR_ACTION_DISABLE); |
| |
| return rc; |
| } |
| |
| static int qpnp_regulator_select_voltage(struct qpnp_regulator *vreg, |
| int min_uV, int max_uV, int *range_sel, int *voltage_sel, |
| unsigned *selector) |
| { |
| struct qpnp_voltage_range *range; |
| int uV = min_uV; |
| int lim_min_uV, lim_max_uV, i, range_id; |
| |
| /* Check if request voltage is outside of physically settable range. */ |
| lim_min_uV = vreg->set_points->range[0].set_point_min_uV; |
| lim_max_uV = |
| vreg->set_points->range[vreg->set_points->count - 1].max_uV; |
| |
| if (uV < lim_min_uV && max_uV >= lim_min_uV) |
| uV = lim_min_uV; |
| |
| if (uV < lim_min_uV || uV > lim_max_uV) { |
| vreg_err(vreg, |
| "request v=[%d, %d] is outside possible v=[%d, %d]\n", |
| min_uV, max_uV, lim_min_uV, lim_max_uV); |
| return -EINVAL; |
| } |
| |
| /* Find the range which uV is inside of. */ |
| for (i = vreg->set_points->count - 1; i > 0; i--) |
| if (uV > vreg->set_points->range[i - 1].max_uV) |
| break; |
| range_id = i; |
| range = &vreg->set_points->range[range_id]; |
| *range_sel = range->range_sel; |
| |
| /* |
| * Force uV to be an allowed set point by applying a ceiling function to |
| * the uV value. |
| */ |
| *voltage_sel = (uV - range->min_uV + range->step_uV - 1) |
| / range->step_uV; |
| uV = *voltage_sel * range->step_uV + range->min_uV; |
| |
| if (uV > max_uV) { |
| vreg_err(vreg, |
| "request v=[%d, %d] cannot be met by any set point; " |
| "next set point: %d\n", |
| min_uV, max_uV, uV); |
| return -EINVAL; |
| } |
| |
| *selector = 0; |
| for (i = 0; i < range_id; i++) |
| *selector += vreg->set_points->range[i].n_voltages; |
| *selector += (uV - range->set_point_min_uV) / range->step_uV; |
| |
| return 0; |
| } |
| |
| static int qpnp_regulator_common_set_voltage(struct regulator_dev *rdev, |
| int min_uV, int max_uV, unsigned *selector) |
| { |
| struct qpnp_regulator *vreg = rdev_get_drvdata(rdev); |
| int rc, range_sel, voltage_sel; |
| u8 buf[2]; |
| |
| rc = qpnp_regulator_select_voltage(vreg, min_uV, max_uV, &range_sel, |
| &voltage_sel, selector); |
| if (rc) { |
| vreg_err(vreg, "could not set voltage, rc=%d\n", rc); |
| return rc; |
| } |
| |
| buf[0] = range_sel; |
| buf[1] = voltage_sel; |
| if ((vreg->ctrl_reg[QPNP_COMMON_IDX_VOLTAGE_RANGE] != range_sel) |
| && (vreg->ctrl_reg[QPNP_COMMON_IDX_VOLTAGE_SET] == voltage_sel)) { |
| /* Handle latched range change. */ |
| rc = qpnp_vreg_write(vreg, QPNP_COMMON_REG_VOLTAGE_RANGE, |
| buf, 2); |
| if (!rc) { |
| vreg->ctrl_reg[QPNP_COMMON_IDX_VOLTAGE_RANGE] = buf[0]; |
| vreg->ctrl_reg[QPNP_COMMON_IDX_VOLTAGE_SET] = buf[1]; |
| } |
| } else { |
| /* Either write can be optimized away safely. */ |
| rc = qpnp_vreg_write_optimized(vreg, |
| QPNP_COMMON_REG_VOLTAGE_RANGE, buf, |
| &vreg->ctrl_reg[QPNP_COMMON_IDX_VOLTAGE_RANGE], 2); |
| } |
| |
| if (rc) |
| vreg_err(vreg, "SPMI write failed, rc=%d\n", rc); |
| else |
| qpnp_vreg_show_state(rdev, QPNP_REGULATOR_ACTION_VOLTAGE); |
| |
| return rc; |
| } |
| |
| static int qpnp_regulator_common_get_voltage(struct regulator_dev *rdev) |
| { |
| struct qpnp_regulator *vreg = rdev_get_drvdata(rdev); |
| struct qpnp_voltage_range *range = NULL; |
| int range_sel, voltage_sel, i; |
| |
| range_sel = vreg->ctrl_reg[QPNP_COMMON_IDX_VOLTAGE_RANGE]; |
| voltage_sel = vreg->ctrl_reg[QPNP_COMMON_IDX_VOLTAGE_SET]; |
| |
| for (i = 0; i < vreg->set_points->count; i++) { |
| if (vreg->set_points->range[i].range_sel == range_sel) { |
| range = &vreg->set_points->range[i]; |
| break; |
| } |
| } |
| |
| if (!range) { |
| vreg_err(vreg, "voltage unknown, range %d is invalid\n", |
| range_sel); |
| return VOLTAGE_UNKNOWN; |
| } |
| |
| return range->step_uV * voltage_sel + range->min_uV; |
| } |
| |
| static int qpnp_regulator_boost_set_voltage(struct regulator_dev *rdev, |
| int min_uV, int max_uV, unsigned *selector) |
| { |
| struct qpnp_regulator *vreg = rdev_get_drvdata(rdev); |
| int rc, range_sel, voltage_sel; |
| |
| rc = qpnp_regulator_select_voltage(vreg, min_uV, max_uV, &range_sel, |
| &voltage_sel, selector); |
| if (rc) { |
| vreg_err(vreg, "could not set voltage, rc=%d\n", rc); |
| return rc; |
| } |
| |
| /* |
| * Boost type regulators do not have range select register so only |
| * voltage set register needs to be written. |
| */ |
| rc = qpnp_vreg_masked_write(vreg, QPNP_COMMON_REG_VOLTAGE_SET, |
| voltage_sel, 0xFF, &vreg->ctrl_reg[QPNP_COMMON_IDX_VOLTAGE_SET]); |
| |
| if (rc) |
| vreg_err(vreg, "SPMI write failed, rc=%d\n", rc); |
| else |
| qpnp_vreg_show_state(rdev, QPNP_REGULATOR_ACTION_VOLTAGE); |
| |
| return rc; |
| } |
| |
| static int qpnp_regulator_boost_get_voltage(struct regulator_dev *rdev) |
| { |
| struct qpnp_regulator *vreg = rdev_get_drvdata(rdev); |
| int voltage_sel = vreg->ctrl_reg[QPNP_COMMON_IDX_VOLTAGE_SET]; |
| |
| return boost_ranges[0].step_uV * voltage_sel + boost_ranges[0].min_uV; |
| } |
| |
| static int qpnp_regulator_common_list_voltage(struct regulator_dev *rdev, |
| unsigned selector) |
| { |
| struct qpnp_regulator *vreg = rdev_get_drvdata(rdev); |
| int uV = 0; |
| int i; |
| |
| if (selector >= vreg->set_points->n_voltages) |
| return 0; |
| |
| for (i = 0; i < vreg->set_points->count; i++) { |
| if (selector < vreg->set_points->range[i].n_voltages) { |
| uV = selector * vreg->set_points->range[i].step_uV |
| + vreg->set_points->range[i].set_point_min_uV; |
| break; |
| } else { |
| selector -= vreg->set_points->range[i].n_voltages; |
| } |
| } |
| |
| return uV; |
| } |
| |
| static unsigned int qpnp_regulator_common_get_mode(struct regulator_dev *rdev) |
| { |
| struct qpnp_regulator *vreg = rdev_get_drvdata(rdev); |
| |
| return (vreg->ctrl_reg[QPNP_COMMON_IDX_MODE] |
| & QPNP_COMMON_MODE_HPM_MASK) |
| ? REGULATOR_MODE_NORMAL : REGULATOR_MODE_IDLE; |
| } |
| |
| static int qpnp_regulator_common_set_mode(struct regulator_dev *rdev, |
| unsigned int mode) |
| { |
| struct qpnp_regulator *vreg = rdev_get_drvdata(rdev); |
| int rc = 0; |
| u8 val; |
| |
| if (mode != REGULATOR_MODE_NORMAL && mode != REGULATOR_MODE_IDLE) { |
| vreg_err(vreg, "invalid mode: %u\n", mode); |
| return -EINVAL; |
| } |
| |
| val = (mode == REGULATOR_MODE_NORMAL ? QPNP_COMMON_MODE_HPM_MASK : 0); |
| |
| rc = qpnp_vreg_masked_write(vreg, QPNP_COMMON_REG_MODE, val, |
| QPNP_COMMON_MODE_HPM_MASK, |
| &vreg->ctrl_reg[QPNP_COMMON_IDX_MODE]); |
| |
| if (rc) |
| vreg_err(vreg, "SPMI write failed, rc=%d\n", rc); |
| else |
| qpnp_vreg_show_state(rdev, QPNP_REGULATOR_ACTION_MODE); |
| |
| return rc; |
| } |
| |
| static unsigned int qpnp_regulator_common_get_optimum_mode( |
| struct regulator_dev *rdev, int input_uV, int output_uV, |
| int load_uA) |
| { |
| struct qpnp_regulator *vreg = rdev_get_drvdata(rdev); |
| unsigned int mode; |
| |
| if (load_uA + vreg->system_load >= vreg->hpm_min_load) |
| mode = REGULATOR_MODE_NORMAL; |
| else |
| mode = REGULATOR_MODE_IDLE; |
| |
| return mode; |
| } |
| |
| static int qpnp_regulator_common_enable_time(struct regulator_dev *rdev) |
| { |
| struct qpnp_regulator *vreg = rdev_get_drvdata(rdev); |
| |
| return vreg->enable_time; |
| } |
| |
| static const char const *qpnp_print_actions[] = { |
| [QPNP_REGULATOR_ACTION_INIT] = "initial ", |
| [QPNP_REGULATOR_ACTION_ENABLE] = "enable ", |
| [QPNP_REGULATOR_ACTION_DISABLE] = "disable ", |
| [QPNP_REGULATOR_ACTION_VOLTAGE] = "set voltage", |
| [QPNP_REGULATOR_ACTION_MODE] = "set mode ", |
| }; |
| |
| static void qpnp_vreg_show_state(struct regulator_dev *rdev, |
| enum qpnp_regulator_action action) |
| { |
| struct qpnp_regulator *vreg = rdev_get_drvdata(rdev); |
| const char *action_label = qpnp_print_actions[action]; |
| unsigned int mode = 0; |
| int uV = 0; |
| const char *mode_label = ""; |
| enum qpnp_regulator_logical_type type; |
| const char *enable_label; |
| char pc_enable_label[5] = {'\0'}; |
| char pc_mode_label[8] = {'\0'}; |
| bool show_req, show_dupe, show_init, has_changed; |
| u8 en_reg, mode_reg; |
| |
| /* Do not print unless appropriate flags are set. */ |
| show_req = qpnp_vreg_debug_mask & QPNP_VREG_DEBUG_REQUEST; |
| show_dupe = qpnp_vreg_debug_mask & QPNP_VREG_DEBUG_DUPLICATE; |
| show_init = qpnp_vreg_debug_mask & QPNP_VREG_DEBUG_INIT; |
| has_changed = vreg->write_count != vreg->prev_write_count; |
| if (!((show_init && action == QPNP_REGULATOR_ACTION_INIT) |
| || (show_req && (has_changed || show_dupe)))) { |
| return; |
| } |
| |
| vreg->prev_write_count = vreg->write_count; |
| |
| type = vreg->logical_type; |
| |
| enable_label = qpnp_regulator_common_is_enabled(rdev) ? "on " : "off"; |
| |
| if (type == QPNP_REGULATOR_LOGICAL_TYPE_SMPS |
| || type == QPNP_REGULATOR_LOGICAL_TYPE_LDO |
| || type == QPNP_REGULATOR_LOGICAL_TYPE_FTSMPS) |
| uV = qpnp_regulator_common_get_voltage(rdev); |
| |
| if (type == QPNP_REGULATOR_LOGICAL_TYPE_BOOST) |
| uV = qpnp_regulator_boost_get_voltage(rdev); |
| |
| if (type == QPNP_REGULATOR_LOGICAL_TYPE_SMPS |
| || type == QPNP_REGULATOR_LOGICAL_TYPE_LDO |
| || type == QPNP_REGULATOR_LOGICAL_TYPE_FTSMPS) { |
| mode = qpnp_regulator_common_get_mode(rdev); |
| mode_label = mode == REGULATOR_MODE_NORMAL ? "HPM" : "LPM"; |
| } |
| |
| if (type == QPNP_REGULATOR_LOGICAL_TYPE_SMPS |
| || type == QPNP_REGULATOR_LOGICAL_TYPE_LDO |
| || type == QPNP_REGULATOR_LOGICAL_TYPE_VS) { |
| en_reg = vreg->ctrl_reg[QPNP_COMMON_IDX_ENABLE]; |
| pc_enable_label[0] = |
| en_reg & QPNP_COMMON_ENABLE_FOLLOW_HW_EN3_MASK ? '3' : '_'; |
| pc_enable_label[1] = |
| en_reg & QPNP_COMMON_ENABLE_FOLLOW_HW_EN2_MASK ? '2' : '_'; |
| pc_enable_label[2] = |
| en_reg & QPNP_COMMON_ENABLE_FOLLOW_HW_EN1_MASK ? '1' : '_'; |
| pc_enable_label[3] = |
| en_reg & QPNP_COMMON_ENABLE_FOLLOW_HW_EN0_MASK ? '0' : '_'; |
| } |
| |
| switch (type) { |
| case QPNP_REGULATOR_LOGICAL_TYPE_SMPS: |
| mode_reg = vreg->ctrl_reg[QPNP_COMMON_IDX_MODE]; |
| pc_mode_label[0] = |
| mode_reg & QPNP_COMMON_MODE_AUTO_MASK ? 'A' : '_'; |
| pc_mode_label[1] = |
| mode_reg & QPNP_COMMON_MODE_FOLLOW_AWAKE_MASK ? 'W' : '_'; |
| pc_mode_label[2] = |
| mode_reg & QPNP_COMMON_MODE_FOLLOW_HW_EN3_MASK ? '3' : '_'; |
| pc_mode_label[3] = |
| mode_reg & QPNP_COMMON_MODE_FOLLOW_HW_EN2_MASK ? '2' : '_'; |
| pc_mode_label[4] = |
| mode_reg & QPNP_COMMON_MODE_FOLLOW_HW_EN1_MASK ? '1' : '_'; |
| pc_mode_label[5] = |
| mode_reg & QPNP_COMMON_MODE_FOLLOW_HW_EN0_MASK ? '0' : '_'; |
| |
| pr_info("%s %-11s: %s, v=%7d uV, mode=%s, pc_en=%s, " |
| "alt_mode=%s\n", |
| action_label, vreg->rdesc.name, enable_label, uV, |
| mode_label, pc_enable_label, pc_mode_label); |
| break; |
| case QPNP_REGULATOR_LOGICAL_TYPE_LDO: |
| mode_reg = vreg->ctrl_reg[QPNP_COMMON_IDX_MODE]; |
| pc_mode_label[0] = |
| mode_reg & QPNP_COMMON_MODE_AUTO_MASK ? 'A' : '_'; |
| pc_mode_label[1] = |
| mode_reg & QPNP_COMMON_MODE_BYPASS_MASK ? 'B' : '_'; |
| pc_mode_label[2] = |
| mode_reg & QPNP_COMMON_MODE_FOLLOW_AWAKE_MASK ? 'W' : '_'; |
| pc_mode_label[3] = |
| mode_reg & QPNP_COMMON_MODE_FOLLOW_HW_EN3_MASK ? '3' : '_'; |
| pc_mode_label[4] = |
| mode_reg & QPNP_COMMON_MODE_FOLLOW_HW_EN2_MASK ? '2' : '_'; |
| pc_mode_label[5] = |
| mode_reg & QPNP_COMMON_MODE_FOLLOW_HW_EN1_MASK ? '1' : '_'; |
| pc_mode_label[6] = |
| mode_reg & QPNP_COMMON_MODE_FOLLOW_HW_EN0_MASK ? '0' : '_'; |
| |
| pr_info("%s %-11s: %s, v=%7d uV, mode=%s, pc_en=%s, " |
| "alt_mode=%s\n", |
| action_label, vreg->rdesc.name, enable_label, uV, |
| mode_label, pc_enable_label, pc_mode_label); |
| break; |
| case QPNP_REGULATOR_LOGICAL_TYPE_VS: |
| mode_reg = vreg->ctrl_reg[QPNP_COMMON_IDX_MODE]; |
| pc_mode_label[0] = |
| mode_reg & QPNP_COMMON_MODE_AUTO_MASK ? 'A' : '_'; |
| pc_mode_label[1] = |
| mode_reg & QPNP_COMMON_MODE_FOLLOW_AWAKE_MASK ? 'W' : '_'; |
| |
| pr_info("%s %-11s: %s, pc_en=%s, alt_mode=%s\n", |
| action_label, vreg->rdesc.name, enable_label, |
| pc_enable_label, pc_mode_label); |
| break; |
| case QPNP_REGULATOR_LOGICAL_TYPE_BOOST: |
| pr_info("%s %-11s: %s, v=%7d uV\n", |
| action_label, vreg->rdesc.name, enable_label, uV); |
| break; |
| case QPNP_REGULATOR_LOGICAL_TYPE_FTSMPS: |
| mode_reg = vreg->ctrl_reg[QPNP_COMMON_IDX_MODE]; |
| pc_mode_label[0] = |
| mode_reg & QPNP_COMMON_MODE_AUTO_MASK ? 'A' : '_'; |
| |
| pr_info("%s %-11s: %s, v=%7d uV, mode=%s, alt_mode=%s\n", |
| action_label, vreg->rdesc.name, enable_label, uV, |
| mode_label, pc_mode_label); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static struct regulator_ops qpnp_smps_ops = { |
| .enable = qpnp_regulator_common_enable, |
| .disable = qpnp_regulator_common_disable, |
| .is_enabled = qpnp_regulator_common_is_enabled, |
| .set_voltage = qpnp_regulator_common_set_voltage, |
| .get_voltage = qpnp_regulator_common_get_voltage, |
| .list_voltage = qpnp_regulator_common_list_voltage, |
| .set_mode = qpnp_regulator_common_set_mode, |
| .get_mode = qpnp_regulator_common_get_mode, |
| .get_optimum_mode = qpnp_regulator_common_get_optimum_mode, |
| .enable_time = qpnp_regulator_common_enable_time, |
| }; |
| |
| static struct regulator_ops qpnp_ldo_ops = { |
| .enable = qpnp_regulator_common_enable, |
| .disable = qpnp_regulator_common_disable, |
| .is_enabled = qpnp_regulator_common_is_enabled, |
| .set_voltage = qpnp_regulator_common_set_voltage, |
| .get_voltage = qpnp_regulator_common_get_voltage, |
| .list_voltage = qpnp_regulator_common_list_voltage, |
| .set_mode = qpnp_regulator_common_set_mode, |
| .get_mode = qpnp_regulator_common_get_mode, |
| .get_optimum_mode = qpnp_regulator_common_get_optimum_mode, |
| .enable_time = qpnp_regulator_common_enable_time, |
| }; |
| |
| static struct regulator_ops qpnp_vs_ops = { |
| .enable = qpnp_regulator_vs_enable, |
| .disable = qpnp_regulator_common_disable, |
| .is_enabled = qpnp_regulator_common_is_enabled, |
| .enable_time = qpnp_regulator_common_enable_time, |
| }; |
| |
| static struct regulator_ops qpnp_boost_ops = { |
| .enable = qpnp_regulator_common_enable, |
| .disable = qpnp_regulator_common_disable, |
| .is_enabled = qpnp_regulator_common_is_enabled, |
| .set_voltage = qpnp_regulator_boost_set_voltage, |
| .get_voltage = qpnp_regulator_boost_get_voltage, |
| .list_voltage = qpnp_regulator_common_list_voltage, |
| .enable_time = qpnp_regulator_common_enable_time, |
| }; |
| |
| static struct regulator_ops qpnp_ftsmps_ops = { |
| .enable = qpnp_regulator_common_enable, |
| .disable = qpnp_regulator_common_disable, |
| .is_enabled = qpnp_regulator_common_is_enabled, |
| .set_voltage = qpnp_regulator_common_set_voltage, |
| .get_voltage = qpnp_regulator_common_get_voltage, |
| .list_voltage = qpnp_regulator_common_list_voltage, |
| .set_mode = qpnp_regulator_common_set_mode, |
| .get_mode = qpnp_regulator_common_get_mode, |
| .get_optimum_mode = qpnp_regulator_common_get_optimum_mode, |
| .enable_time = qpnp_regulator_common_enable_time, |
| }; |
| |
| /* Maximum possible digital major revision value */ |
| #define INF 0xFF |
| |
| static const struct qpnp_regulator_mapping supported_regulators[] = { |
| /* type subtype dig_min dig_max ltype ops setpoints hpm_min */ |
| QPNP_VREG_MAP(BUCK, GP_CTL, 0, INF, SMPS, smps, smps, 100000), |
| QPNP_VREG_MAP(LDO, N300, 0, INF, LDO, ldo, nldo1, 10000), |
| QPNP_VREG_MAP(LDO, N600, 0, 0, LDO, ldo, nldo2, 10000), |
| QPNP_VREG_MAP(LDO, N1200, 0, 0, LDO, ldo, nldo2, 10000), |
| QPNP_VREG_MAP(LDO, N600, 1, INF, LDO, ldo, nldo3, 10000), |
| QPNP_VREG_MAP(LDO, N1200, 1, INF, LDO, ldo, nldo3, 10000), |
| QPNP_VREG_MAP(LDO, N600_ST, 0, 0, LDO, ldo, nldo2, 10000), |
| QPNP_VREG_MAP(LDO, N1200_ST, 0, 0, LDO, ldo, nldo2, 10000), |
| QPNP_VREG_MAP(LDO, N600_ST, 1, INF, LDO, ldo, nldo3, 10000), |
| QPNP_VREG_MAP(LDO, N1200_ST, 1, INF, LDO, ldo, nldo3, 10000), |
| QPNP_VREG_MAP(LDO, P50, 0, INF, LDO, ldo, pldo, 5000), |
| QPNP_VREG_MAP(LDO, P150, 0, INF, LDO, ldo, pldo, 10000), |
| QPNP_VREG_MAP(LDO, P300, 0, INF, LDO, ldo, pldo, 10000), |
| QPNP_VREG_MAP(LDO, P600, 0, INF, LDO, ldo, pldo, 10000), |
| QPNP_VREG_MAP(LDO, P1200, 0, INF, LDO, ldo, pldo, 10000), |
| QPNP_VREG_MAP(LDO, LV_P50, 0, INF, LDO, ldo, pldo, 5000), |
| QPNP_VREG_MAP(LDO, LV_P150, 0, INF, LDO, ldo, pldo, 10000), |
| QPNP_VREG_MAP(LDO, LV_P300, 0, INF, LDO, ldo, pldo, 10000), |
| QPNP_VREG_MAP(LDO, LV_P600, 0, INF, LDO, ldo, pldo, 10000), |
| QPNP_VREG_MAP(LDO, LV_P1200, 0, INF, LDO, ldo, pldo, 10000), |
| QPNP_VREG_MAP(VS, LV100, 0, INF, VS, vs, none, 0), |
| QPNP_VREG_MAP(VS, LV300, 0, INF, VS, vs, none, 0), |
| QPNP_VREG_MAP(VS, MV300, 0, INF, VS, vs, none, 0), |
| QPNP_VREG_MAP(VS, MV500, 0, INF, VS, vs, none, 0), |
| QPNP_VREG_MAP(VS, HDMI, 0, INF, VS, vs, none, 0), |
| QPNP_VREG_MAP(VS, OTG, 0, INF, VS, vs, none, 0), |
| QPNP_VREG_MAP(BOOST, 5V_BOOST, 0, INF, BOOST, boost, boost, 0), |
| QPNP_VREG_MAP(FTS, FTS_CTL, 0, INF, FTSMPS, ftsmps, ftsmps, 100000), |
| }; |
| |
| static int qpnp_regulator_match(struct qpnp_regulator *vreg) |
| { |
| const struct qpnp_regulator_mapping *mapping; |
| struct device_node *node = vreg->spmi_dev->dev.of_node; |
| int rc, i; |
| u32 type_reg[2], dig_major_rev; |
| u8 version[QPNP_COMMON_REG_SUBTYPE - QPNP_COMMON_REG_DIG_MAJOR_REV + 1]; |
| u8 type, subtype; |
| |
| rc = qpnp_vreg_read(vreg, QPNP_COMMON_REG_DIG_MAJOR_REV, version, |
| ARRAY_SIZE(version)); |
| if (rc) { |
| vreg_err(vreg, "could not read version registers, rc=%d\n", rc); |
| return rc; |
| } |
| dig_major_rev = version[QPNP_COMMON_REG_DIG_MAJOR_REV |
| - QPNP_COMMON_REG_DIG_MAJOR_REV]; |
| type = version[QPNP_COMMON_REG_TYPE |
| - QPNP_COMMON_REG_DIG_MAJOR_REV]; |
| subtype = version[QPNP_COMMON_REG_SUBTYPE |
| - QPNP_COMMON_REG_DIG_MAJOR_REV]; |
| |
| /* |
| * Override type and subtype register values if qcom,force-type is |
| * present in the device tree node. |
| */ |
| rc = of_property_read_u32_array(node, "qcom,force-type", type_reg, 2); |
| if (!rc) { |
| type = type_reg[0]; |
| subtype = type_reg[1]; |
| } |
| |
| rc = -ENODEV; |
| for (i = 0; i < ARRAY_SIZE(supported_regulators); i++) { |
| mapping = &supported_regulators[i]; |
| if (mapping->type == type && mapping->subtype == subtype |
| && mapping->revision_min <= dig_major_rev |
| && mapping->revision_max >= dig_major_rev) { |
| vreg->logical_type = mapping->logical_type; |
| vreg->set_points = mapping->set_points; |
| vreg->hpm_min_load = mapping->hpm_min_load; |
| vreg->rdesc.ops = mapping->ops; |
| vreg->rdesc.n_voltages |
| = mapping->set_points->n_voltages; |
| rc = 0; |
| break; |
| } |
| } |
| |
| return rc; |
| } |
| |
| static int qpnp_regulator_init_registers(struct qpnp_regulator *vreg, |
| struct qpnp_regulator_platform_data *pdata) |
| { |
| int rc, i; |
| enum qpnp_regulator_logical_type type; |
| u8 ctrl_reg[8], reg, mask; |
| |
| type = vreg->logical_type; |
| |
| rc = qpnp_vreg_read(vreg, QPNP_COMMON_REG_VOLTAGE_RANGE, |
| vreg->ctrl_reg, 8); |
| if (rc) { |
| vreg_err(vreg, "spmi read failed, rc=%d\n", rc); |
| return rc; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(ctrl_reg); i++) |
| ctrl_reg[i] = vreg->ctrl_reg[i]; |
| |
| /* Set up enable pin control. */ |
| if ((type == QPNP_REGULATOR_LOGICAL_TYPE_SMPS |
| || type == QPNP_REGULATOR_LOGICAL_TYPE_LDO |
| || type == QPNP_REGULATOR_LOGICAL_TYPE_VS) |
| && !(pdata->pin_ctrl_enable |
| & QPNP_REGULATOR_PIN_CTRL_ENABLE_HW_DEFAULT)) { |
| ctrl_reg[QPNP_COMMON_IDX_ENABLE] &= |
| ~QPNP_COMMON_ENABLE_FOLLOW_ALL_MASK; |
| ctrl_reg[QPNP_COMMON_IDX_ENABLE] |= |
| pdata->pin_ctrl_enable & QPNP_COMMON_ENABLE_FOLLOW_ALL_MASK; |
| } |
| |
| /* Set up auto mode control. */ |
| if ((type == QPNP_REGULATOR_LOGICAL_TYPE_SMPS |
| || type == QPNP_REGULATOR_LOGICAL_TYPE_LDO |
| || type == QPNP_REGULATOR_LOGICAL_TYPE_VS |
| || type == QPNP_REGULATOR_LOGICAL_TYPE_FTSMPS) |
| && (pdata->auto_mode_enable != QPNP_REGULATOR_USE_HW_DEFAULT)) { |
| ctrl_reg[QPNP_COMMON_IDX_MODE] &= |
| ~QPNP_COMMON_MODE_AUTO_MASK; |
| ctrl_reg[QPNP_COMMON_IDX_MODE] |= |
| (pdata->auto_mode_enable ? QPNP_COMMON_MODE_AUTO_MASK : 0); |
| } |
| |
| /* Set up mode pin control. */ |
| if ((type == QPNP_REGULATOR_LOGICAL_TYPE_SMPS |
| || type == QPNP_REGULATOR_LOGICAL_TYPE_LDO) |
| && !(pdata->pin_ctrl_hpm |
| & QPNP_REGULATOR_PIN_CTRL_HPM_HW_DEFAULT)) { |
| ctrl_reg[QPNP_COMMON_IDX_MODE] &= |
| ~QPNP_COMMON_MODE_FOLLOW_ALL_MASK; |
| ctrl_reg[QPNP_COMMON_IDX_MODE] |= |
| pdata->pin_ctrl_hpm & QPNP_COMMON_MODE_FOLLOW_ALL_MASK; |
| } |
| |
| if (type == QPNP_REGULATOR_LOGICAL_TYPE_VS |
| && !(pdata->pin_ctrl_hpm & QPNP_REGULATOR_PIN_CTRL_HPM_HW_DEFAULT)) { |
| ctrl_reg[QPNP_COMMON_IDX_MODE] &= |
| ~QPNP_COMMON_MODE_FOLLOW_AWAKE_MASK; |
| ctrl_reg[QPNP_COMMON_IDX_MODE] |= |
| pdata->pin_ctrl_hpm & QPNP_COMMON_MODE_FOLLOW_AWAKE_MASK; |
| } |
| |
| if (type == QPNP_REGULATOR_LOGICAL_TYPE_LDO |
| && pdata->bypass_mode_enable != QPNP_REGULATOR_USE_HW_DEFAULT) { |
| ctrl_reg[QPNP_COMMON_IDX_MODE] &= |
| ~QPNP_COMMON_MODE_BYPASS_MASK; |
| ctrl_reg[QPNP_COMMON_IDX_MODE] |= |
| (pdata->bypass_mode_enable |
| ? QPNP_COMMON_MODE_BYPASS_MASK : 0); |
| } |
| |
| /* Set boost current limit. */ |
| if (type == QPNP_REGULATOR_LOGICAL_TYPE_BOOST |
| && pdata->boost_current_limit |
| != QPNP_BOOST_CURRENT_LIMIT_HW_DEFAULT) { |
| reg = pdata->boost_current_limit; |
| mask = QPNP_BOOST_CURRENT_LIMIT_MASK; |
| rc = qpnp_vreg_masked_read_write(vreg, |
| QPNP_BOOST_REG_CURRENT_LIMIT, reg, mask); |
| if (rc) { |
| vreg_err(vreg, "spmi write failed, rc=%d\n", rc); |
| return rc; |
| } |
| } |
| |
| /* Write back any control register values that were modified. */ |
| rc = qpnp_vreg_write_optimized(vreg, QPNP_COMMON_REG_VOLTAGE_RANGE, |
| ctrl_reg, vreg->ctrl_reg, 8); |
| if (rc) { |
| vreg_err(vreg, "spmi write failed, rc=%d\n", rc); |
| return rc; |
| } |
| |
| /* Set pull down. */ |
| if ((type == QPNP_REGULATOR_LOGICAL_TYPE_SMPS |
| || type == QPNP_REGULATOR_LOGICAL_TYPE_LDO |
| || type == QPNP_REGULATOR_LOGICAL_TYPE_VS) |
| && pdata->pull_down_enable != QPNP_REGULATOR_USE_HW_DEFAULT) { |
| reg = pdata->pull_down_enable |
| ? QPNP_COMMON_PULL_DOWN_ENABLE_MASK : 0; |
| rc = qpnp_vreg_write(vreg, QPNP_COMMON_REG_PULL_DOWN, ®, 1); |
| if (rc) { |
| vreg_err(vreg, "spmi write failed, rc=%d\n", rc); |
| return rc; |
| } |
| } |
| |
| if (type == QPNP_REGULATOR_LOGICAL_TYPE_FTSMPS |
| && pdata->pull_down_enable != QPNP_REGULATOR_USE_HW_DEFAULT) { |
| /* FTSMPS has other bits in the pull down control register. */ |
| reg = pdata->pull_down_enable |
| ? QPNP_COMMON_PULL_DOWN_ENABLE_MASK : 0; |
| rc = qpnp_vreg_masked_read_write(vreg, |
| QPNP_COMMON_REG_PULL_DOWN, reg, |
| QPNP_COMMON_PULL_DOWN_ENABLE_MASK); |
| if (rc) { |
| vreg_err(vreg, "spmi write failed, rc=%d\n", rc); |
| return rc; |
| } |
| } |
| |
| /* Set soft start for LDO. */ |
| if (type == QPNP_REGULATOR_LOGICAL_TYPE_LDO |
| && pdata->soft_start_enable != QPNP_REGULATOR_USE_HW_DEFAULT) { |
| reg = pdata->soft_start_enable |
| ? QPNP_LDO_SOFT_START_ENABLE_MASK : 0; |
| rc = qpnp_vreg_write(vreg, QPNP_LDO_REG_SOFT_START, ®, 1); |
| if (rc) { |
| vreg_err(vreg, "spmi write failed, rc=%d\n", rc); |
| return rc; |
| } |
| } |
| |
| /* Set soft start strength and over current protection for VS. */ |
| if (type == QPNP_REGULATOR_LOGICAL_TYPE_VS) { |
| reg = 0; |
| mask = 0; |
| if (pdata->soft_start_enable != QPNP_REGULATOR_USE_HW_DEFAULT) { |
| reg |= pdata->soft_start_enable |
| ? QPNP_VS_SOFT_START_ENABLE_MASK : 0; |
| mask |= QPNP_VS_SOFT_START_ENABLE_MASK; |
| } |
| if (pdata->vs_soft_start_strength |
| != QPNP_VS_SOFT_START_STR_HW_DEFAULT) { |
| reg |= pdata->vs_soft_start_strength |
| & QPNP_VS_SOFT_START_SEL_MASK; |
| mask |= QPNP_VS_SOFT_START_SEL_MASK; |
| } |
| rc = qpnp_vreg_masked_read_write(vreg, QPNP_VS_REG_SOFT_START, |
| reg, mask); |
| if (rc) { |
| vreg_err(vreg, "spmi write failed, rc=%d\n", rc); |
| return rc; |
| } |
| |
| if (pdata->ocp_enable != QPNP_REGULATOR_USE_HW_DEFAULT) { |
| reg = pdata->ocp_enable ? QPNP_VS_OCP_ENABLE_MASK : 0; |
| rc = qpnp_vreg_write(vreg, QPNP_VS_REG_OCP, ®, 1); |
| if (rc) { |
| vreg_err(vreg, "spmi write failed, rc=%d\n", |
| rc); |
| return rc; |
| } |
| } |
| } |
| |
| return rc; |
| } |
| |
| /* Fill in pdata elements based on values found in device tree. */ |
| static int qpnp_regulator_get_dt_config(struct spmi_device *spmi, |
| struct qpnp_regulator_platform_data *pdata) |
| { |
| struct resource *res; |
| struct device_node *node = spmi->dev.of_node; |
| int rc = 0; |
| |
| pdata->init_data.constraints.input_uV |
| = pdata->init_data.constraints.max_uV; |
| |
| res = spmi_get_resource(spmi, NULL, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_err(&spmi->dev, "%s: node is missing base address\n", |
| __func__); |
| return -EINVAL; |
| } |
| pdata->base_addr = res->start; |
| |
| /* |
| * Initialize configuration parameters to use hardware default in case |
| * no value is specified via device tree. |
| */ |
| pdata->auto_mode_enable = QPNP_REGULATOR_USE_HW_DEFAULT; |
| pdata->bypass_mode_enable = QPNP_REGULATOR_USE_HW_DEFAULT; |
| pdata->ocp_enable = QPNP_REGULATOR_USE_HW_DEFAULT; |
| pdata->pull_down_enable = QPNP_REGULATOR_USE_HW_DEFAULT; |
| pdata->soft_start_enable = QPNP_REGULATOR_USE_HW_DEFAULT; |
| pdata->boost_current_limit = QPNP_BOOST_CURRENT_LIMIT_HW_DEFAULT; |
| pdata->pin_ctrl_enable = QPNP_REGULATOR_PIN_CTRL_ENABLE_HW_DEFAULT; |
| pdata->pin_ctrl_hpm = QPNP_REGULATOR_PIN_CTRL_HPM_HW_DEFAULT; |
| pdata->vs_soft_start_strength = QPNP_VS_SOFT_START_STR_HW_DEFAULT; |
| |
| /* These bindings are optional, so it is okay if they are not found. */ |
| of_property_read_u32(node, "qcom,auto-mode-enable", |
| &pdata->auto_mode_enable); |
| of_property_read_u32(node, "qcom,bypass-mode-enable", |
| &pdata->bypass_mode_enable); |
| of_property_read_u32(node, "qcom,ocp-enable", &pdata->ocp_enable); |
| of_property_read_u32(node, "qcom,pull-down-enable", |
| &pdata->pull_down_enable); |
| of_property_read_u32(node, "qcom,soft-start-enable", |
| &pdata->soft_start_enable); |
| of_property_read_u32(node, "qcom,boost-current-limit", |
| &pdata->boost_current_limit); |
| of_property_read_u32(node, "qcom,pin-ctrl-enable", |
| &pdata->pin_ctrl_enable); |
| of_property_read_u32(node, "qcom,pin-ctrl-hpm", &pdata->pin_ctrl_hpm); |
| of_property_read_u32(node, "qcom,vs-soft-start-strength", |
| &pdata->vs_soft_start_strength); |
| of_property_read_u32(node, "qcom,system-load", &pdata->system_load); |
| of_property_read_u32(node, "qcom,enable-time", &pdata->enable_time); |
| of_property_read_u32(node, "qcom,ocp-enable-time", |
| &pdata->ocp_enable_time); |
| |
| return rc; |
| } |
| |
| static struct of_device_id spmi_match_table[]; |
| |
| #define MAX_NAME_LEN 127 |
| |
| static int __devinit qpnp_regulator_probe(struct spmi_device *spmi) |
| { |
| struct qpnp_regulator_platform_data *pdata; |
| struct qpnp_regulator *vreg; |
| struct regulator_desc *rdesc; |
| struct qpnp_regulator_platform_data of_pdata; |
| struct regulator_init_data *init_data; |
| char *reg_name; |
| int rc; |
| bool is_dt; |
| |
| vreg = kzalloc(sizeof(struct qpnp_regulator), GFP_KERNEL); |
| if (!vreg) { |
| dev_err(&spmi->dev, "%s: Can't allocate qpnp_regulator\n", |
| __func__); |
| return -ENOMEM; |
| } |
| |
| is_dt = of_match_device(spmi_match_table, &spmi->dev); |
| |
| /* Check if device tree is in use. */ |
| if (is_dt) { |
| init_data = of_get_regulator_init_data(&spmi->dev, |
| spmi->dev.of_node); |
| if (!init_data) { |
| dev_err(&spmi->dev, "%s: unable to allocate memory\n", |
| __func__); |
| kfree(vreg); |
| return -ENOMEM; |
| } |
| memset(&of_pdata, 0, |
| sizeof(struct qpnp_regulator_platform_data)); |
| memcpy(&of_pdata.init_data, init_data, |
| sizeof(struct regulator_init_data)); |
| |
| if (of_get_property(spmi->dev.of_node, "parent-supply", NULL)) |
| of_pdata.init_data.supply_regulator = "parent"; |
| |
| rc = qpnp_regulator_get_dt_config(spmi, &of_pdata); |
| if (rc) { |
| dev_err(&spmi->dev, "%s: DT parsing failed, rc=%d\n", |
| __func__, rc); |
| kfree(vreg); |
| return -ENOMEM; |
| } |
| |
| pdata = &of_pdata; |
| } else { |
| pdata = spmi->dev.platform_data; |
| } |
| |
| if (pdata == NULL) { |
| dev_err(&spmi->dev, "%s: no platform data specified\n", |
| __func__); |
| kfree(vreg); |
| return -EINVAL; |
| } |
| |
| vreg->spmi_dev = spmi; |
| vreg->prev_write_count = -1; |
| vreg->write_count = 0; |
| vreg->base_addr = pdata->base_addr; |
| vreg->enable_time = pdata->enable_time; |
| vreg->system_load = pdata->system_load; |
| vreg->ocp_enable = pdata->ocp_enable; |
| vreg->ocp_enable_time = pdata->ocp_enable_time; |
| |
| rdesc = &vreg->rdesc; |
| rdesc->id = spmi->ctrl->nr; |
| rdesc->owner = THIS_MODULE; |
| rdesc->type = REGULATOR_VOLTAGE; |
| |
| reg_name = kzalloc(strnlen(pdata->init_data.constraints.name, |
| MAX_NAME_LEN) + 1, GFP_KERNEL); |
| if (!reg_name) { |
| dev_err(&spmi->dev, "%s: Can't allocate regulator name\n", |
| __func__); |
| kfree(vreg); |
| return -ENOMEM; |
| } |
| strlcpy(reg_name, pdata->init_data.constraints.name, |
| strnlen(pdata->init_data.constraints.name, MAX_NAME_LEN) + 1); |
| rdesc->name = reg_name; |
| |
| dev_set_drvdata(&spmi->dev, vreg); |
| |
| rc = qpnp_regulator_match(vreg); |
| if (rc) { |
| vreg_err(vreg, "regulator type unknown, rc=%d\n", rc); |
| goto bail; |
| } |
| |
| if (is_dt && rdesc->ops) { |
| /* Fill in ops and mode masks when using device tree. */ |
| if (rdesc->ops->enable) |
| pdata->init_data.constraints.valid_ops_mask |
| |= REGULATOR_CHANGE_STATUS; |
| if (rdesc->ops->get_voltage) |
| pdata->init_data.constraints.valid_ops_mask |
| |= REGULATOR_CHANGE_VOLTAGE; |
| if (rdesc->ops->get_mode) { |
| pdata->init_data.constraints.valid_ops_mask |
| |= REGULATOR_CHANGE_MODE |
| | REGULATOR_CHANGE_DRMS; |
| pdata->init_data.constraints.valid_modes_mask |
| = REGULATOR_MODE_NORMAL | REGULATOR_MODE_IDLE; |
| } |
| } |
| |
| rc = qpnp_regulator_init_registers(vreg, pdata); |
| if (rc) { |
| vreg_err(vreg, "common initialization failed, rc=%d\n", rc); |
| goto bail; |
| } |
| |
| vreg->rdev = regulator_register(rdesc, &spmi->dev, |
| &(pdata->init_data), vreg, spmi->dev.of_node); |
| if (IS_ERR(vreg->rdev)) { |
| rc = PTR_ERR(vreg->rdev); |
| vreg_err(vreg, "regulator_register failed, rc=%d\n", rc); |
| goto bail; |
| } |
| |
| qpnp_vreg_show_state(vreg->rdev, QPNP_REGULATOR_ACTION_INIT); |
| |
| return 0; |
| |
| bail: |
| if (rc) |
| vreg_err(vreg, "probe failed, rc=%d\n", rc); |
| |
| kfree(vreg->rdesc.name); |
| kfree(vreg); |
| |
| return rc; |
| } |
| |
| static int __devexit qpnp_regulator_remove(struct spmi_device *spmi) |
| { |
| struct qpnp_regulator *vreg; |
| |
| vreg = dev_get_drvdata(&spmi->dev); |
| dev_set_drvdata(&spmi->dev, NULL); |
| |
| if (vreg) { |
| regulator_unregister(vreg->rdev); |
| kfree(vreg->rdesc.name); |
| kfree(vreg); |
| } |
| |
| return 0; |
| } |
| |
| static struct of_device_id spmi_match_table[] = { |
| { .compatible = QPNP_REGULATOR_DRIVER_NAME, }, |
| {} |
| }; |
| |
| static const struct spmi_device_id qpnp_regulator_id[] = { |
| { QPNP_REGULATOR_DRIVER_NAME, 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(spmi, qpnp_regulator_id); |
| |
| static struct spmi_driver qpnp_regulator_driver = { |
| .driver = { |
| .name = QPNP_REGULATOR_DRIVER_NAME, |
| .of_match_table = spmi_match_table, |
| .owner = THIS_MODULE, |
| }, |
| .probe = qpnp_regulator_probe, |
| .remove = __devexit_p(qpnp_regulator_remove), |
| .id_table = qpnp_regulator_id, |
| }; |
| |
| /* |
| * Pre-compute the number of set points available for each regulator type to |
| * avoid unnecessary calculations later in runtime. |
| */ |
| static void qpnp_regulator_set_point_init(void) |
| { |
| struct qpnp_voltage_set_points **set_points; |
| int i, j, temp; |
| |
| set_points = all_set_points; |
| |
| for (i = 0; i < ARRAY_SIZE(all_set_points); i++) { |
| temp = 0; |
| for (j = 0; j < all_set_points[i]->count; j++) { |
| all_set_points[i]->range[j].n_voltages |
| = (all_set_points[i]->range[j].max_uV |
| - all_set_points[i]->range[j].set_point_min_uV) |
| / all_set_points[i]->range[j].step_uV + 1; |
| temp += all_set_points[i]->range[j].n_voltages; |
| } |
| all_set_points[i]->n_voltages = temp; |
| } |
| } |
| |
| /** |
| * qpnp_regulator_init() - register spmi driver for qpnp-regulator |
| * |
| * This initialization function should be called in systems in which driver |
| * registration ordering must be controlled precisely. |
| */ |
| int __init qpnp_regulator_init(void) |
| { |
| static bool has_registered; |
| |
| if (has_registered) |
| return 0; |
| else |
| has_registered = true; |
| |
| qpnp_regulator_set_point_init(); |
| |
| return spmi_driver_register(&qpnp_regulator_driver); |
| } |
| EXPORT_SYMBOL(qpnp_regulator_init); |
| |
| static void __exit qpnp_regulator_exit(void) |
| { |
| spmi_driver_unregister(&qpnp_regulator_driver); |
| } |
| |
| MODULE_DESCRIPTION("QPNP PMIC regulator driver"); |
| MODULE_LICENSE("GPL v2"); |
| |
| arch_initcall(qpnp_regulator_init); |
| module_exit(qpnp_regulator_exit); |