| /* |
| * |
| * $Id$ |
| * |
| * Copyright (C) 2005 Mike Isely <isely@pobox.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| */ |
| |
| #include <linux/errno.h> |
| #include <linux/string.h> |
| #include <linux/slab.h> |
| #include <linux/firmware.h> |
| #include <linux/videodev2.h> |
| #include <media/v4l2-common.h> |
| #include <asm/semaphore.h> |
| #include "pvrusb2.h" |
| #include "pvrusb2-std.h" |
| #include "pvrusb2-util.h" |
| #include "pvrusb2-hdw.h" |
| #include "pvrusb2-i2c-core.h" |
| #include "pvrusb2-tuner.h" |
| #include "pvrusb2-eeprom.h" |
| #include "pvrusb2-hdw-internal.h" |
| #include "pvrusb2-encoder.h" |
| #include "pvrusb2-debug.h" |
| |
| #define TV_MIN_FREQ 55250000L |
| #define TV_MAX_FREQ 850000000L |
| |
| #define RADIO_MIN_FREQ 1392000L //87MHz |
| #define RADIO_MAX_FREQ 1728000L //108MHz |
| |
| struct usb_device_id pvr2_device_table[] = { |
| [PVR2_HDW_TYPE_29XXX] = { USB_DEVICE(0x2040, 0x2900) }, |
| [PVR2_HDW_TYPE_24XXX] = { USB_DEVICE(0x2040, 0x2400) }, |
| { } |
| }; |
| |
| MODULE_DEVICE_TABLE(usb, pvr2_device_table); |
| |
| static const char *pvr2_device_names[] = { |
| [PVR2_HDW_TYPE_29XXX] = "WinTV PVR USB2 Model Category 29xxxx", |
| [PVR2_HDW_TYPE_24XXX] = "WinTV PVR USB2 Model Category 24xxxx", |
| }; |
| |
| struct pvr2_string_table { |
| const char **lst; |
| unsigned int cnt; |
| }; |
| |
| // Names of other client modules to request for 24xxx model hardware |
| static const char *pvr2_client_24xxx[] = { |
| "cx25840", |
| "tuner", |
| "wm8775", |
| }; |
| |
| // Names of other client modules to request for 29xxx model hardware |
| static const char *pvr2_client_29xxx[] = { |
| "msp3400", |
| "saa7115", |
| "tuner", |
| }; |
| |
| static struct pvr2_string_table pvr2_client_lists[] = { |
| [PVR2_HDW_TYPE_29XXX] = { |
| pvr2_client_29xxx, |
| sizeof(pvr2_client_29xxx)/sizeof(pvr2_client_29xxx[0]), |
| }, |
| [PVR2_HDW_TYPE_24XXX] = { |
| pvr2_client_24xxx, |
| sizeof(pvr2_client_24xxx)/sizeof(pvr2_client_24xxx[0]), |
| }, |
| }; |
| |
| static struct pvr2_hdw *unit_pointers[PVR_NUM] = {[ 0 ... PVR_NUM-1 ] = NULL}; |
| static DECLARE_MUTEX(pvr2_unit_sem); |
| |
| static int ctlchg = 0; |
| static int initusbreset = 1; |
| static int procreload = 0; |
| static int tuner[PVR_NUM] = { [0 ... PVR_NUM-1] = -1 }; |
| static int tolerance[PVR_NUM] = { [0 ... PVR_NUM-1] = 0 }; |
| static int video_std[PVR_NUM] = { [0 ... PVR_NUM-1] = 0 }; |
| static int init_pause_msec = 0; |
| |
| module_param(ctlchg, int, S_IRUGO|S_IWUSR); |
| MODULE_PARM_DESC(ctlchg, "0=optimize ctl change 1=always accept new ctl value"); |
| module_param(init_pause_msec, int, S_IRUGO|S_IWUSR); |
| MODULE_PARM_DESC(init_pause_msec, "hardware initialization settling delay"); |
| module_param(initusbreset, int, S_IRUGO|S_IWUSR); |
| MODULE_PARM_DESC(initusbreset, "Do USB reset device on probe"); |
| module_param(procreload, int, S_IRUGO|S_IWUSR); |
| MODULE_PARM_DESC(procreload, |
| "Attempt init failure recovery with firmware reload"); |
| module_param_array(tuner, int, NULL, 0444); |
| MODULE_PARM_DESC(tuner,"specify installed tuner type"); |
| module_param_array(video_std, int, NULL, 0444); |
| MODULE_PARM_DESC(video_std,"specify initial video standard"); |
| module_param_array(tolerance, int, NULL, 0444); |
| MODULE_PARM_DESC(tolerance,"specify stream error tolerance"); |
| |
| #define PVR2_CTL_WRITE_ENDPOINT 0x01 |
| #define PVR2_CTL_READ_ENDPOINT 0x81 |
| |
| #define PVR2_GPIO_IN 0x9008 |
| #define PVR2_GPIO_OUT 0x900c |
| #define PVR2_GPIO_DIR 0x9020 |
| |
| #define trace_firmware(...) pvr2_trace(PVR2_TRACE_FIRMWARE,__VA_ARGS__) |
| |
| #define PVR2_FIRMWARE_ENDPOINT 0x02 |
| |
| /* size of a firmware chunk */ |
| #define FIRMWARE_CHUNK_SIZE 0x2000 |
| |
| /* Define the list of additional controls we'll dynamically construct based |
| on query of the cx2341x module. */ |
| struct pvr2_mpeg_ids { |
| const char *strid; |
| int id; |
| }; |
| static const struct pvr2_mpeg_ids mpeg_ids[] = { |
| { |
| .strid = "audio_layer", |
| .id = V4L2_CID_MPEG_AUDIO_ENCODING, |
| },{ |
| .strid = "audio_bitrate", |
| .id = V4L2_CID_MPEG_AUDIO_L2_BITRATE, |
| },{ |
| /* Already using audio_mode elsewhere :-( */ |
| .strid = "mpeg_audio_mode", |
| .id = V4L2_CID_MPEG_AUDIO_MODE, |
| },{ |
| .strid = "mpeg_audio_mode_extension", |
| .id = V4L2_CID_MPEG_AUDIO_MODE_EXTENSION, |
| },{ |
| .strid = "audio_emphasis", |
| .id = V4L2_CID_MPEG_AUDIO_EMPHASIS, |
| },{ |
| .strid = "audio_crc", |
| .id = V4L2_CID_MPEG_AUDIO_CRC, |
| },{ |
| .strid = "video_aspect", |
| .id = V4L2_CID_MPEG_VIDEO_ASPECT, |
| },{ |
| .strid = "video_b_frames", |
| .id = V4L2_CID_MPEG_VIDEO_B_FRAMES, |
| },{ |
| .strid = "video_gop_size", |
| .id = V4L2_CID_MPEG_VIDEO_GOP_SIZE, |
| },{ |
| .strid = "video_gop_closure", |
| .id = V4L2_CID_MPEG_VIDEO_GOP_CLOSURE, |
| },{ |
| .strid = "video_bitrate_mode", |
| .id = V4L2_CID_MPEG_VIDEO_BITRATE_MODE, |
| },{ |
| .strid = "video_bitrate", |
| .id = V4L2_CID_MPEG_VIDEO_BITRATE, |
| },{ |
| .strid = "video_bitrate_peak", |
| .id = V4L2_CID_MPEG_VIDEO_BITRATE_PEAK, |
| },{ |
| .strid = "video_temporal_decimation", |
| .id = V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION, |
| },{ |
| .strid = "stream_type", |
| .id = V4L2_CID_MPEG_STREAM_TYPE, |
| },{ |
| .strid = "video_spatial_filter_mode", |
| .id = V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE, |
| },{ |
| .strid = "video_spatial_filter", |
| .id = V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER, |
| },{ |
| .strid = "video_luma_spatial_filter_type", |
| .id = V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE, |
| },{ |
| .strid = "video_chroma_spatial_filter_type", |
| .id = V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE, |
| },{ |
| .strid = "video_temporal_filter_mode", |
| .id = V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE, |
| },{ |
| .strid = "video_temporal_filter", |
| .id = V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER, |
| },{ |
| .strid = "video_median_filter_type", |
| .id = V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE, |
| },{ |
| .strid = "video_luma_median_filter_top", |
| .id = V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP, |
| },{ |
| .strid = "video_luma_median_filter_bottom", |
| .id = V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM, |
| },{ |
| .strid = "video_chroma_median_filter_top", |
| .id = V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP, |
| },{ |
| .strid = "video_chroma_median_filter_bottom", |
| .id = V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM, |
| } |
| }; |
| #define MPEGDEF_COUNT (sizeof(mpeg_ids)/sizeof(mpeg_ids[0])) |
| |
| |
| static const char *control_values_srate[] = { |
| [V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100] = "44.1 kHz", |
| [V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000] = "48 kHz", |
| [V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000] = "32 kHz", |
| }; |
| |
| |
| |
| static const char *control_values_input[] = { |
| [PVR2_CVAL_INPUT_TV] = "television", /*xawtv needs this name*/ |
| [PVR2_CVAL_INPUT_RADIO] = "radio", |
| [PVR2_CVAL_INPUT_SVIDEO] = "s-video", |
| [PVR2_CVAL_INPUT_COMPOSITE] = "composite", |
| }; |
| |
| |
| static const char *control_values_audiomode[] = { |
| [V4L2_TUNER_MODE_MONO] = "Mono", |
| [V4L2_TUNER_MODE_STEREO] = "Stereo", |
| [V4L2_TUNER_MODE_LANG1] = "Lang1", |
| [V4L2_TUNER_MODE_LANG2] = "Lang2", |
| [V4L2_TUNER_MODE_LANG1_LANG2] = "Lang1+Lang2", |
| }; |
| |
| |
| static const char *control_values_hsm[] = { |
| [PVR2_CVAL_HSM_FAIL] = "Fail", |
| [PVR2_CVAL_HSM_HIGH] = "High", |
| [PVR2_CVAL_HSM_FULL] = "Full", |
| }; |
| |
| |
| static const char *control_values_subsystem[] = { |
| [PVR2_SUBSYS_B_ENC_FIRMWARE] = "enc_firmware", |
| [PVR2_SUBSYS_B_ENC_CFG] = "enc_config", |
| [PVR2_SUBSYS_B_DIGITIZER_RUN] = "digitizer_run", |
| [PVR2_SUBSYS_B_USBSTREAM_RUN] = "usbstream_run", |
| [PVR2_SUBSYS_B_ENC_RUN] = "enc_run", |
| }; |
| |
| static int pvr2_hdw_cmd_usbstream(struct pvr2_hdw *hdw,int runFl); |
| static int pvr2_hdw_commit_ctl_internal(struct pvr2_hdw *hdw); |
| static int pvr2_hdw_get_eeprom_addr(struct pvr2_hdw *hdw); |
| static unsigned int pvr2_hdw_get_signal_status_internal(struct pvr2_hdw *hdw); |
| static void pvr2_hdw_internal_find_stdenum(struct pvr2_hdw *hdw); |
| static void pvr2_hdw_internal_set_std_avail(struct pvr2_hdw *hdw); |
| static void pvr2_hdw_render_useless_unlocked(struct pvr2_hdw *hdw); |
| static void pvr2_hdw_subsys_bit_chg_no_lock(struct pvr2_hdw *hdw, |
| unsigned long msk, |
| unsigned long val); |
| static void pvr2_hdw_subsys_stream_bit_chg_no_lock(struct pvr2_hdw *hdw, |
| unsigned long msk, |
| unsigned long val); |
| static int pvr2_send_request_ex(struct pvr2_hdw *hdw, |
| unsigned int timeout,int probe_fl, |
| void *write_data,unsigned int write_len, |
| void *read_data,unsigned int read_len); |
| static int pvr2_write_u16(struct pvr2_hdw *hdw, u16 data, int res); |
| static int pvr2_write_u8(struct pvr2_hdw *hdw, u8 data, int res); |
| |
| static int ctrl_channelfreq_get(struct pvr2_ctrl *cptr,int *vp) |
| { |
| struct pvr2_hdw *hdw = cptr->hdw; |
| if ((hdw->freqProgSlot > 0) && (hdw->freqProgSlot <= FREQTABLE_SIZE)) { |
| *vp = hdw->freqTable[hdw->freqProgSlot-1]; |
| } else { |
| *vp = 0; |
| } |
| return 0; |
| } |
| |
| static int ctrl_channelfreq_set(struct pvr2_ctrl *cptr,int m,int v) |
| { |
| struct pvr2_hdw *hdw = cptr->hdw; |
| if ((hdw->freqProgSlot > 0) && (hdw->freqProgSlot <= FREQTABLE_SIZE)) { |
| hdw->freqTable[hdw->freqProgSlot-1] = v; |
| } |
| return 0; |
| } |
| |
| static int ctrl_channelprog_get(struct pvr2_ctrl *cptr,int *vp) |
| { |
| *vp = cptr->hdw->freqProgSlot; |
| return 0; |
| } |
| |
| static int ctrl_channelprog_set(struct pvr2_ctrl *cptr,int m,int v) |
| { |
| struct pvr2_hdw *hdw = cptr->hdw; |
| if ((v >= 0) && (v <= FREQTABLE_SIZE)) { |
| hdw->freqProgSlot = v; |
| } |
| return 0; |
| } |
| |
| static int ctrl_channel_get(struct pvr2_ctrl *cptr,int *vp) |
| { |
| *vp = cptr->hdw->freqSlot; |
| return 0; |
| } |
| |
| static int ctrl_channel_set(struct pvr2_ctrl *cptr,int m,int v) |
| { |
| unsigned freq = 0; |
| struct pvr2_hdw *hdw = cptr->hdw; |
| hdw->freqSlot = v; |
| if ((hdw->freqSlot > 0) && (hdw->freqSlot <= FREQTABLE_SIZE)) { |
| freq = hdw->freqTable[hdw->freqSlot-1]; |
| } |
| if (freq && (freq != hdw->freqVal)) { |
| hdw->freqVal = freq; |
| hdw->freqDirty = !0; |
| } |
| return 0; |
| } |
| |
| static int ctrl_freq_get(struct pvr2_ctrl *cptr,int *vp) |
| { |
| *vp = cptr->hdw->freqVal; |
| return 0; |
| } |
| |
| static int ctrl_freq_is_dirty(struct pvr2_ctrl *cptr) |
| { |
| return cptr->hdw->freqDirty != 0; |
| } |
| |
| static void ctrl_freq_clear_dirty(struct pvr2_ctrl *cptr) |
| { |
| cptr->hdw->freqDirty = 0; |
| } |
| |
| static int ctrl_freq_set(struct pvr2_ctrl *cptr,int m,int v) |
| { |
| struct pvr2_hdw *hdw = cptr->hdw; |
| hdw->freqVal = v; |
| hdw->freqDirty = !0; |
| hdw->freqSlot = 0; |
| return 0; |
| } |
| |
| static int ctrl_vres_max_get(struct pvr2_ctrl *cptr,int *vp) |
| { |
| /* Actual maximum depends on the video standard in effect. */ |
| if (cptr->hdw->std_mask_cur & V4L2_STD_525_60) { |
| *vp = 480; |
| } else { |
| *vp = 576; |
| } |
| return 0; |
| } |
| |
| static int ctrl_vres_min_get(struct pvr2_ctrl *cptr,int *vp) |
| { |
| /* Actual minimum depends on device type. */ |
| if (cptr->hdw->hdw_type == PVR2_HDW_TYPE_24XXX) { |
| *vp = 75; |
| } else { |
| *vp = 17; |
| } |
| return 0; |
| } |
| |
| static int ctrl_freq_max_get(struct pvr2_ctrl *cptr, int *vp) |
| { |
| /* Actual maximum depends on radio/tv mode */ |
| if (cptr->hdw->input_val == PVR2_CVAL_INPUT_RADIO) { |
| *vp = RADIO_MAX_FREQ; |
| } else { |
| *vp = TV_MAX_FREQ; |
| } |
| return 0; |
| } |
| |
| static int ctrl_freq_min_get(struct pvr2_ctrl *cptr, int *vp) |
| { |
| /* Actual minimum depends on radio/tv mode */ |
| if (cptr->hdw->input_val == PVR2_CVAL_INPUT_RADIO) { |
| *vp = RADIO_MIN_FREQ; |
| } else { |
| *vp = TV_MIN_FREQ; |
| } |
| return 0; |
| } |
| |
| static int ctrl_cx2341x_is_dirty(struct pvr2_ctrl *cptr) |
| { |
| return cptr->hdw->enc_stale != 0; |
| } |
| |
| static void ctrl_cx2341x_clear_dirty(struct pvr2_ctrl *cptr) |
| { |
| cptr->hdw->enc_stale = 0; |
| } |
| |
| static int ctrl_cx2341x_get(struct pvr2_ctrl *cptr,int *vp) |
| { |
| int ret; |
| struct v4l2_ext_controls cs; |
| struct v4l2_ext_control c1; |
| memset(&cs,0,sizeof(cs)); |
| memset(&c1,0,sizeof(c1)); |
| cs.controls = &c1; |
| cs.count = 1; |
| c1.id = cptr->info->v4l_id; |
| ret = cx2341x_ext_ctrls(&cptr->hdw->enc_ctl_state,&cs, |
| VIDIOC_G_EXT_CTRLS); |
| if (ret) return ret; |
| *vp = c1.value; |
| return 0; |
| } |
| |
| static int ctrl_cx2341x_set(struct pvr2_ctrl *cptr,int m,int v) |
| { |
| int ret; |
| struct v4l2_ext_controls cs; |
| struct v4l2_ext_control c1; |
| memset(&cs,0,sizeof(cs)); |
| memset(&c1,0,sizeof(c1)); |
| cs.controls = &c1; |
| cs.count = 1; |
| c1.id = cptr->info->v4l_id; |
| c1.value = v; |
| ret = cx2341x_ext_ctrls(&cptr->hdw->enc_ctl_state,&cs, |
| VIDIOC_S_EXT_CTRLS); |
| if (ret) return ret; |
| cptr->hdw->enc_stale = !0; |
| return 0; |
| } |
| |
| static unsigned int ctrl_cx2341x_getv4lflags(struct pvr2_ctrl *cptr) |
| { |
| struct v4l2_queryctrl qctrl; |
| struct pvr2_ctl_info *info; |
| qctrl.id = cptr->info->v4l_id; |
| cx2341x_ctrl_query(&cptr->hdw->enc_ctl_state,&qctrl); |
| /* Strip out the const so we can adjust a function pointer. It's |
| OK to do this here because we know this is a dynamically created |
| control, so the underlying storage for the info pointer is (a) |
| private to us, and (b) not in read-only storage. Either we do |
| this or we significantly complicate the underlying control |
| implementation. */ |
| info = (struct pvr2_ctl_info *)(cptr->info); |
| if (qctrl.flags & V4L2_CTRL_FLAG_READ_ONLY) { |
| if (info->set_value) { |
| info->set_value = NULL; |
| } |
| } else { |
| if (!(info->set_value)) { |
| info->set_value = ctrl_cx2341x_set; |
| } |
| } |
| return qctrl.flags; |
| } |
| |
| static int ctrl_streamingenabled_get(struct pvr2_ctrl *cptr,int *vp) |
| { |
| *vp = cptr->hdw->flag_streaming_enabled; |
| return 0; |
| } |
| |
| static int ctrl_hsm_get(struct pvr2_ctrl *cptr,int *vp) |
| { |
| int result = pvr2_hdw_is_hsm(cptr->hdw); |
| *vp = PVR2_CVAL_HSM_FULL; |
| if (result < 0) *vp = PVR2_CVAL_HSM_FAIL; |
| if (result) *vp = PVR2_CVAL_HSM_HIGH; |
| return 0; |
| } |
| |
| static int ctrl_stdavail_get(struct pvr2_ctrl *cptr,int *vp) |
| { |
| *vp = cptr->hdw->std_mask_avail; |
| return 0; |
| } |
| |
| static int ctrl_stdavail_set(struct pvr2_ctrl *cptr,int m,int v) |
| { |
| struct pvr2_hdw *hdw = cptr->hdw; |
| v4l2_std_id ns; |
| ns = hdw->std_mask_avail; |
| ns = (ns & ~m) | (v & m); |
| if (ns == hdw->std_mask_avail) return 0; |
| hdw->std_mask_avail = ns; |
| pvr2_hdw_internal_set_std_avail(hdw); |
| pvr2_hdw_internal_find_stdenum(hdw); |
| return 0; |
| } |
| |
| static int ctrl_std_val_to_sym(struct pvr2_ctrl *cptr,int msk,int val, |
| char *bufPtr,unsigned int bufSize, |
| unsigned int *len) |
| { |
| *len = pvr2_std_id_to_str(bufPtr,bufSize,msk & val); |
| return 0; |
| } |
| |
| static int ctrl_std_sym_to_val(struct pvr2_ctrl *cptr, |
| const char *bufPtr,unsigned int bufSize, |
| int *mskp,int *valp) |
| { |
| int ret; |
| v4l2_std_id id; |
| ret = pvr2_std_str_to_id(&id,bufPtr,bufSize); |
| if (ret < 0) return ret; |
| if (mskp) *mskp = id; |
| if (valp) *valp = id; |
| return 0; |
| } |
| |
| static int ctrl_stdcur_get(struct pvr2_ctrl *cptr,int *vp) |
| { |
| *vp = cptr->hdw->std_mask_cur; |
| return 0; |
| } |
| |
| static int ctrl_stdcur_set(struct pvr2_ctrl *cptr,int m,int v) |
| { |
| struct pvr2_hdw *hdw = cptr->hdw; |
| v4l2_std_id ns; |
| ns = hdw->std_mask_cur; |
| ns = (ns & ~m) | (v & m); |
| if (ns == hdw->std_mask_cur) return 0; |
| hdw->std_mask_cur = ns; |
| hdw->std_dirty = !0; |
| pvr2_hdw_internal_find_stdenum(hdw); |
| return 0; |
| } |
| |
| static int ctrl_stdcur_is_dirty(struct pvr2_ctrl *cptr) |
| { |
| return cptr->hdw->std_dirty != 0; |
| } |
| |
| static void ctrl_stdcur_clear_dirty(struct pvr2_ctrl *cptr) |
| { |
| cptr->hdw->std_dirty = 0; |
| } |
| |
| static int ctrl_signal_get(struct pvr2_ctrl *cptr,int *vp) |
| { |
| *vp = ((pvr2_hdw_get_signal_status_internal(cptr->hdw) & |
| PVR2_SIGNAL_OK) ? 1 : 0); |
| return 0; |
| } |
| |
| static int ctrl_subsys_get(struct pvr2_ctrl *cptr,int *vp) |
| { |
| *vp = cptr->hdw->subsys_enabled_mask; |
| return 0; |
| } |
| |
| static int ctrl_subsys_set(struct pvr2_ctrl *cptr,int m,int v) |
| { |
| pvr2_hdw_subsys_bit_chg_no_lock(cptr->hdw,m,v); |
| return 0; |
| } |
| |
| static int ctrl_subsys_stream_get(struct pvr2_ctrl *cptr,int *vp) |
| { |
| *vp = cptr->hdw->subsys_stream_mask; |
| return 0; |
| } |
| |
| static int ctrl_subsys_stream_set(struct pvr2_ctrl *cptr,int m,int v) |
| { |
| pvr2_hdw_subsys_stream_bit_chg_no_lock(cptr->hdw,m,v); |
| return 0; |
| } |
| |
| static int ctrl_stdenumcur_set(struct pvr2_ctrl *cptr,int m,int v) |
| { |
| struct pvr2_hdw *hdw = cptr->hdw; |
| if (v < 0) return -EINVAL; |
| if (v > hdw->std_enum_cnt) return -EINVAL; |
| hdw->std_enum_cur = v; |
| if (!v) return 0; |
| v--; |
| if (hdw->std_mask_cur == hdw->std_defs[v].id) return 0; |
| hdw->std_mask_cur = hdw->std_defs[v].id; |
| hdw->std_dirty = !0; |
| return 0; |
| } |
| |
| |
| static int ctrl_stdenumcur_get(struct pvr2_ctrl *cptr,int *vp) |
| { |
| *vp = cptr->hdw->std_enum_cur; |
| return 0; |
| } |
| |
| |
| static int ctrl_stdenumcur_is_dirty(struct pvr2_ctrl *cptr) |
| { |
| return cptr->hdw->std_dirty != 0; |
| } |
| |
| |
| static void ctrl_stdenumcur_clear_dirty(struct pvr2_ctrl *cptr) |
| { |
| cptr->hdw->std_dirty = 0; |
| } |
| |
| |
| #define DEFINT(vmin,vmax) \ |
| .type = pvr2_ctl_int, \ |
| .def.type_int.min_value = vmin, \ |
| .def.type_int.max_value = vmax |
| |
| #define DEFENUM(tab) \ |
| .type = pvr2_ctl_enum, \ |
| .def.type_enum.count = (sizeof(tab)/sizeof((tab)[0])), \ |
| .def.type_enum.value_names = tab |
| |
| #define DEFBOOL \ |
| .type = pvr2_ctl_bool |
| |
| #define DEFMASK(msk,tab) \ |
| .type = pvr2_ctl_bitmask, \ |
| .def.type_bitmask.valid_bits = msk, \ |
| .def.type_bitmask.bit_names = tab |
| |
| #define DEFREF(vname) \ |
| .set_value = ctrl_set_##vname, \ |
| .get_value = ctrl_get_##vname, \ |
| .is_dirty = ctrl_isdirty_##vname, \ |
| .clear_dirty = ctrl_cleardirty_##vname |
| |
| |
| #define VCREATE_FUNCS(vname) \ |
| static int ctrl_get_##vname(struct pvr2_ctrl *cptr,int *vp) \ |
| {*vp = cptr->hdw->vname##_val; return 0;} \ |
| static int ctrl_set_##vname(struct pvr2_ctrl *cptr,int m,int v) \ |
| {cptr->hdw->vname##_val = v; cptr->hdw->vname##_dirty = !0; return 0;} \ |
| static int ctrl_isdirty_##vname(struct pvr2_ctrl *cptr) \ |
| {return cptr->hdw->vname##_dirty != 0;} \ |
| static void ctrl_cleardirty_##vname(struct pvr2_ctrl *cptr) \ |
| {cptr->hdw->vname##_dirty = 0;} |
| |
| VCREATE_FUNCS(brightness) |
| VCREATE_FUNCS(contrast) |
| VCREATE_FUNCS(saturation) |
| VCREATE_FUNCS(hue) |
| VCREATE_FUNCS(volume) |
| VCREATE_FUNCS(balance) |
| VCREATE_FUNCS(bass) |
| VCREATE_FUNCS(treble) |
| VCREATE_FUNCS(mute) |
| VCREATE_FUNCS(input) |
| VCREATE_FUNCS(audiomode) |
| VCREATE_FUNCS(res_hor) |
| VCREATE_FUNCS(res_ver) |
| VCREATE_FUNCS(srate) |
| |
| /* Table definition of all controls which can be manipulated */ |
| static const struct pvr2_ctl_info control_defs[] = { |
| { |
| .v4l_id = V4L2_CID_BRIGHTNESS, |
| .desc = "Brightness", |
| .name = "brightness", |
| .default_value = 128, |
| DEFREF(brightness), |
| DEFINT(0,255), |
| },{ |
| .v4l_id = V4L2_CID_CONTRAST, |
| .desc = "Contrast", |
| .name = "contrast", |
| .default_value = 68, |
| DEFREF(contrast), |
| DEFINT(0,127), |
| },{ |
| .v4l_id = V4L2_CID_SATURATION, |
| .desc = "Saturation", |
| .name = "saturation", |
| .default_value = 64, |
| DEFREF(saturation), |
| DEFINT(0,127), |
| },{ |
| .v4l_id = V4L2_CID_HUE, |
| .desc = "Hue", |
| .name = "hue", |
| .default_value = 0, |
| DEFREF(hue), |
| DEFINT(-128,127), |
| },{ |
| .v4l_id = V4L2_CID_AUDIO_VOLUME, |
| .desc = "Volume", |
| .name = "volume", |
| .default_value = 65535, |
| DEFREF(volume), |
| DEFINT(0,65535), |
| },{ |
| .v4l_id = V4L2_CID_AUDIO_BALANCE, |
| .desc = "Balance", |
| .name = "balance", |
| .default_value = 0, |
| DEFREF(balance), |
| DEFINT(-32768,32767), |
| },{ |
| .v4l_id = V4L2_CID_AUDIO_BASS, |
| .desc = "Bass", |
| .name = "bass", |
| .default_value = 0, |
| DEFREF(bass), |
| DEFINT(-32768,32767), |
| },{ |
| .v4l_id = V4L2_CID_AUDIO_TREBLE, |
| .desc = "Treble", |
| .name = "treble", |
| .default_value = 0, |
| DEFREF(treble), |
| DEFINT(-32768,32767), |
| },{ |
| .v4l_id = V4L2_CID_AUDIO_MUTE, |
| .desc = "Mute", |
| .name = "mute", |
| .default_value = 0, |
| DEFREF(mute), |
| DEFBOOL, |
| },{ |
| .desc = "Video Source", |
| .name = "input", |
| .internal_id = PVR2_CID_INPUT, |
| .default_value = PVR2_CVAL_INPUT_TV, |
| DEFREF(input), |
| DEFENUM(control_values_input), |
| },{ |
| .desc = "Audio Mode", |
| .name = "audio_mode", |
| .internal_id = PVR2_CID_AUDIOMODE, |
| .default_value = V4L2_TUNER_MODE_STEREO, |
| DEFREF(audiomode), |
| DEFENUM(control_values_audiomode), |
| },{ |
| .desc = "Horizontal capture resolution", |
| .name = "resolution_hor", |
| .internal_id = PVR2_CID_HRES, |
| .default_value = 720, |
| DEFREF(res_hor), |
| DEFINT(19,720), |
| },{ |
| .desc = "Vertical capture resolution", |
| .name = "resolution_ver", |
| .internal_id = PVR2_CID_VRES, |
| .default_value = 480, |
| DEFREF(res_ver), |
| DEFINT(17,576), |
| /* Hook in check for video standard and adjust maximum |
| depending on the standard. */ |
| .get_max_value = ctrl_vres_max_get, |
| .get_min_value = ctrl_vres_min_get, |
| },{ |
| .v4l_id = V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ, |
| .default_value = V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000, |
| .desc = "Audio Sampling Frequency", |
| .name = "srate", |
| DEFREF(srate), |
| DEFENUM(control_values_srate), |
| },{ |
| .desc = "Tuner Frequency (Hz)", |
| .name = "frequency", |
| .internal_id = PVR2_CID_FREQUENCY, |
| .default_value = 175250000L, |
| .set_value = ctrl_freq_set, |
| .get_value = ctrl_freq_get, |
| .is_dirty = ctrl_freq_is_dirty, |
| .clear_dirty = ctrl_freq_clear_dirty, |
| DEFINT(TV_MIN_FREQ,TV_MAX_FREQ), |
| /* Hook in check for input value (tv/radio) and adjust |
| max/min values accordingly */ |
| .get_max_value = ctrl_freq_max_get, |
| .get_min_value = ctrl_freq_min_get, |
| },{ |
| .desc = "Channel", |
| .name = "channel", |
| .set_value = ctrl_channel_set, |
| .get_value = ctrl_channel_get, |
| DEFINT(0,FREQTABLE_SIZE), |
| },{ |
| .desc = "Channel Program Frequency", |
| .name = "freq_table_value", |
| .set_value = ctrl_channelfreq_set, |
| .get_value = ctrl_channelfreq_get, |
| DEFINT(TV_MIN_FREQ,TV_MAX_FREQ), |
| },{ |
| .desc = "Channel Program ID", |
| .name = "freq_table_channel", |
| .set_value = ctrl_channelprog_set, |
| .get_value = ctrl_channelprog_get, |
| DEFINT(0,FREQTABLE_SIZE), |
| },{ |
| .desc = "Streaming Enabled", |
| .name = "streaming_enabled", |
| .get_value = ctrl_streamingenabled_get, |
| DEFBOOL, |
| },{ |
| .desc = "USB Speed", |
| .name = "usb_speed", |
| .get_value = ctrl_hsm_get, |
| DEFENUM(control_values_hsm), |
| },{ |
| .desc = "Signal Present", |
| .name = "signal_present", |
| .get_value = ctrl_signal_get, |
| DEFBOOL, |
| },{ |
| .desc = "Video Standards Available Mask", |
| .name = "video_standard_mask_available", |
| .internal_id = PVR2_CID_STDAVAIL, |
| .skip_init = !0, |
| .get_value = ctrl_stdavail_get, |
| .set_value = ctrl_stdavail_set, |
| .val_to_sym = ctrl_std_val_to_sym, |
| .sym_to_val = ctrl_std_sym_to_val, |
| .type = pvr2_ctl_bitmask, |
| },{ |
| .desc = "Video Standards In Use Mask", |
| .name = "video_standard_mask_active", |
| .internal_id = PVR2_CID_STDCUR, |
| .skip_init = !0, |
| .get_value = ctrl_stdcur_get, |
| .set_value = ctrl_stdcur_set, |
| .is_dirty = ctrl_stdcur_is_dirty, |
| .clear_dirty = ctrl_stdcur_clear_dirty, |
| .val_to_sym = ctrl_std_val_to_sym, |
| .sym_to_val = ctrl_std_sym_to_val, |
| .type = pvr2_ctl_bitmask, |
| },{ |
| .desc = "Subsystem enabled mask", |
| .name = "debug_subsys_mask", |
| .skip_init = !0, |
| .get_value = ctrl_subsys_get, |
| .set_value = ctrl_subsys_set, |
| DEFMASK(PVR2_SUBSYS_ALL,control_values_subsystem), |
| },{ |
| .desc = "Subsystem stream mask", |
| .name = "debug_subsys_stream_mask", |
| .skip_init = !0, |
| .get_value = ctrl_subsys_stream_get, |
| .set_value = ctrl_subsys_stream_set, |
| DEFMASK(PVR2_SUBSYS_ALL,control_values_subsystem), |
| },{ |
| .desc = "Video Standard Name", |
| .name = "video_standard", |
| .internal_id = PVR2_CID_STDENUM, |
| .skip_init = !0, |
| .get_value = ctrl_stdenumcur_get, |
| .set_value = ctrl_stdenumcur_set, |
| .is_dirty = ctrl_stdenumcur_is_dirty, |
| .clear_dirty = ctrl_stdenumcur_clear_dirty, |
| .type = pvr2_ctl_enum, |
| } |
| }; |
| |
| #define CTRLDEF_COUNT (sizeof(control_defs)/sizeof(control_defs[0])) |
| |
| |
| const char *pvr2_config_get_name(enum pvr2_config cfg) |
| { |
| switch (cfg) { |
| case pvr2_config_empty: return "empty"; |
| case pvr2_config_mpeg: return "mpeg"; |
| case pvr2_config_vbi: return "vbi"; |
| case pvr2_config_radio: return "radio"; |
| } |
| return "<unknown>"; |
| } |
| |
| |
| struct usb_device *pvr2_hdw_get_dev(struct pvr2_hdw *hdw) |
| { |
| return hdw->usb_dev; |
| } |
| |
| |
| unsigned long pvr2_hdw_get_sn(struct pvr2_hdw *hdw) |
| { |
| return hdw->serial_number; |
| } |
| |
| int pvr2_hdw_get_unit_number(struct pvr2_hdw *hdw) |
| { |
| return hdw->unit_number; |
| } |
| |
| |
| /* Attempt to locate one of the given set of files. Messages are logged |
| appropriate to what has been found. The return value will be 0 or |
| greater on success (it will be the index of the file name found) and |
| fw_entry will be filled in. Otherwise a negative error is returned on |
| failure. If the return value is -ENOENT then no viable firmware file |
| could be located. */ |
| static int pvr2_locate_firmware(struct pvr2_hdw *hdw, |
| const struct firmware **fw_entry, |
| const char *fwtypename, |
| unsigned int fwcount, |
| const char *fwnames[]) |
| { |
| unsigned int idx; |
| int ret = -EINVAL; |
| for (idx = 0; idx < fwcount; idx++) { |
| ret = request_firmware(fw_entry, |
| fwnames[idx], |
| &hdw->usb_dev->dev); |
| if (!ret) { |
| trace_firmware("Located %s firmware: %s;" |
| " uploading...", |
| fwtypename, |
| fwnames[idx]); |
| return idx; |
| } |
| if (ret == -ENOENT) continue; |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "request_firmware fatal error with code=%d",ret); |
| return ret; |
| } |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "***WARNING***" |
| " Device %s firmware" |
| " seems to be missing.", |
| fwtypename); |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "Did you install the pvrusb2 firmware files" |
| " in their proper location?"); |
| if (fwcount == 1) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "request_firmware unable to locate %s file %s", |
| fwtypename,fwnames[0]); |
| } else { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "request_firmware unable to locate" |
| " one of the following %s files:", |
| fwtypename); |
| for (idx = 0; idx < fwcount; idx++) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "request_firmware: Failed to find %s", |
| fwnames[idx]); |
| } |
| } |
| return ret; |
| } |
| |
| |
| /* |
| * pvr2_upload_firmware1(). |
| * |
| * Send the 8051 firmware to the device. After the upload, arrange for |
| * device to re-enumerate. |
| * |
| * NOTE : the pointer to the firmware data given by request_firmware() |
| * is not suitable for an usb transaction. |
| * |
| */ |
| static int pvr2_upload_firmware1(struct pvr2_hdw *hdw) |
| { |
| const struct firmware *fw_entry = NULL; |
| void *fw_ptr; |
| unsigned int pipe; |
| int ret; |
| u16 address; |
| static const char *fw_files_29xxx[] = { |
| "v4l-pvrusb2-29xxx-01.fw", |
| }; |
| static const char *fw_files_24xxx[] = { |
| "v4l-pvrusb2-24xxx-01.fw", |
| }; |
| static const struct pvr2_string_table fw_file_defs[] = { |
| [PVR2_HDW_TYPE_29XXX] = { |
| fw_files_29xxx, |
| sizeof(fw_files_29xxx)/sizeof(fw_files_29xxx[0]), |
| }, |
| [PVR2_HDW_TYPE_24XXX] = { |
| fw_files_24xxx, |
| sizeof(fw_files_24xxx)/sizeof(fw_files_24xxx[0]), |
| }, |
| }; |
| hdw->fw1_state = FW1_STATE_FAILED; // default result |
| |
| trace_firmware("pvr2_upload_firmware1"); |
| |
| ret = pvr2_locate_firmware(hdw,&fw_entry,"fx2 controller", |
| fw_file_defs[hdw->hdw_type].cnt, |
| fw_file_defs[hdw->hdw_type].lst); |
| if (ret < 0) { |
| if (ret == -ENOENT) hdw->fw1_state = FW1_STATE_MISSING; |
| return ret; |
| } |
| |
| usb_settoggle(hdw->usb_dev, 0 & 0xf, !(0 & USB_DIR_IN), 0); |
| usb_clear_halt(hdw->usb_dev, usb_sndbulkpipe(hdw->usb_dev, 0 & 0x7f)); |
| |
| pipe = usb_sndctrlpipe(hdw->usb_dev, 0); |
| |
| if (fw_entry->size != 0x2000){ |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS,"wrong fx2 firmware size"); |
| release_firmware(fw_entry); |
| return -ENOMEM; |
| } |
| |
| fw_ptr = kmalloc(0x800, GFP_KERNEL); |
| if (fw_ptr == NULL){ |
| release_firmware(fw_entry); |
| return -ENOMEM; |
| } |
| |
| /* We have to hold the CPU during firmware upload. */ |
| pvr2_hdw_cpureset_assert(hdw,1); |
| |
| /* upload the firmware to address 0000-1fff in 2048 (=0x800) bytes |
| chunk. */ |
| |
| ret = 0; |
| for(address = 0; address < fw_entry->size; address += 0x800) { |
| memcpy(fw_ptr, fw_entry->data + address, 0x800); |
| ret += usb_control_msg(hdw->usb_dev, pipe, 0xa0, 0x40, address, |
| 0, fw_ptr, 0x800, HZ); |
| } |
| |
| trace_firmware("Upload done, releasing device's CPU"); |
| |
| /* Now release the CPU. It will disconnect and reconnect later. */ |
| pvr2_hdw_cpureset_assert(hdw,0); |
| |
| kfree(fw_ptr); |
| release_firmware(fw_entry); |
| |
| trace_firmware("Upload done (%d bytes sent)",ret); |
| |
| /* We should have written 8192 bytes */ |
| if (ret == 8192) { |
| hdw->fw1_state = FW1_STATE_RELOAD; |
| return 0; |
| } |
| |
| return -EIO; |
| } |
| |
| |
| /* |
| * pvr2_upload_firmware2() |
| * |
| * This uploads encoder firmware on endpoint 2. |
| * |
| */ |
| |
| int pvr2_upload_firmware2(struct pvr2_hdw *hdw) |
| { |
| const struct firmware *fw_entry = NULL; |
| void *fw_ptr; |
| unsigned int pipe, fw_len, fw_done; |
| int actual_length; |
| int ret = 0; |
| int fwidx; |
| static const char *fw_files[] = { |
| CX2341X_FIRM_ENC_FILENAME, |
| }; |
| |
| trace_firmware("pvr2_upload_firmware2"); |
| |
| ret = pvr2_locate_firmware(hdw,&fw_entry,"encoder", |
| sizeof(fw_files)/sizeof(fw_files[0]), |
| fw_files); |
| if (ret < 0) return ret; |
| fwidx = ret; |
| ret = 0; |
| /* Since we're about to completely reinitialize the encoder, |
| invalidate our cached copy of its configuration state. Next |
| time we configure the encoder, then we'll fully configure it. */ |
| hdw->enc_cur_valid = 0; |
| |
| /* First prepare firmware loading */ |
| ret |= pvr2_write_register(hdw, 0x0048, 0xffffffff); /*interrupt mask*/ |
| ret |= pvr2_hdw_gpio_chg_dir(hdw,0xffffffff,0x00000088); /*gpio dir*/ |
| ret |= pvr2_hdw_gpio_chg_out(hdw,0xffffffff,0x00000008); /*gpio output state*/ |
| ret |= pvr2_hdw_cmd_deep_reset(hdw); |
| ret |= pvr2_write_register(hdw, 0xa064, 0x00000000); /*APU command*/ |
| ret |= pvr2_hdw_gpio_chg_dir(hdw,0xffffffff,0x00000408); /*gpio dir*/ |
| ret |= pvr2_hdw_gpio_chg_out(hdw,0xffffffff,0x00000008); /*gpio output state*/ |
| ret |= pvr2_write_register(hdw, 0x9058, 0xffffffed); /*VPU ctrl*/ |
| ret |= pvr2_write_register(hdw, 0x9054, 0xfffffffd); /*reset hw blocks*/ |
| ret |= pvr2_write_register(hdw, 0x07f8, 0x80000800); /*encoder SDRAM refresh*/ |
| ret |= pvr2_write_register(hdw, 0x07fc, 0x0000001a); /*encoder SDRAM pre-charge*/ |
| ret |= pvr2_write_register(hdw, 0x0700, 0x00000000); /*I2C clock*/ |
| ret |= pvr2_write_register(hdw, 0xaa00, 0x00000000); /*unknown*/ |
| ret |= pvr2_write_register(hdw, 0xaa04, 0x00057810); /*unknown*/ |
| ret |= pvr2_write_register(hdw, 0xaa10, 0x00148500); /*unknown*/ |
| ret |= pvr2_write_register(hdw, 0xaa18, 0x00840000); /*unknown*/ |
| ret |= pvr2_write_u8(hdw, 0x52, 0); |
| ret |= pvr2_write_u16(hdw, 0x0600, 0); |
| |
| if (ret) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "firmware2 upload prep failed, ret=%d",ret); |
| release_firmware(fw_entry); |
| return ret; |
| } |
| |
| /* Now send firmware */ |
| |
| fw_len = fw_entry->size; |
| |
| if (fw_len % FIRMWARE_CHUNK_SIZE) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "size of %s firmware" |
| " must be a multiple of 8192B", |
| fw_files[fwidx]); |
| release_firmware(fw_entry); |
| return -1; |
| } |
| |
| fw_ptr = kmalloc(FIRMWARE_CHUNK_SIZE, GFP_KERNEL); |
| if (fw_ptr == NULL){ |
| release_firmware(fw_entry); |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "failed to allocate memory for firmware2 upload"); |
| return -ENOMEM; |
| } |
| |
| pipe = usb_sndbulkpipe(hdw->usb_dev, PVR2_FIRMWARE_ENDPOINT); |
| |
| for (fw_done = 0 ; (fw_done < fw_len) && !ret ; |
| fw_done += FIRMWARE_CHUNK_SIZE ) { |
| int i; |
| memcpy(fw_ptr, fw_entry->data + fw_done, FIRMWARE_CHUNK_SIZE); |
| /* Usbsnoop log shows that we must swap bytes... */ |
| for (i = 0; i < FIRMWARE_CHUNK_SIZE/4 ; i++) |
| ((u32 *)fw_ptr)[i] = ___swab32(((u32 *)fw_ptr)[i]); |
| |
| ret |= usb_bulk_msg(hdw->usb_dev, pipe, fw_ptr, |
| FIRMWARE_CHUNK_SIZE, |
| &actual_length, HZ); |
| ret |= (actual_length != FIRMWARE_CHUNK_SIZE); |
| } |
| |
| trace_firmware("upload of %s : %i / %i ", |
| fw_files[fwidx],fw_done,fw_len); |
| |
| kfree(fw_ptr); |
| release_firmware(fw_entry); |
| |
| if (ret) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "firmware2 upload transfer failure"); |
| return ret; |
| } |
| |
| /* Finish upload */ |
| |
| ret |= pvr2_write_register(hdw, 0x9054, 0xffffffff); /*reset hw blocks*/ |
| ret |= pvr2_write_register(hdw, 0x9058, 0xffffffe8); /*VPU ctrl*/ |
| ret |= pvr2_write_u16(hdw, 0x0600, 0); |
| |
| if (ret) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "firmware2 upload post-proc failure"); |
| } else { |
| hdw->subsys_enabled_mask |= (1<<PVR2_SUBSYS_B_ENC_FIRMWARE); |
| } |
| return ret; |
| } |
| |
| |
| #define FIRMWARE_RECOVERY_BITS \ |
| ((1<<PVR2_SUBSYS_B_ENC_CFG) | \ |
| (1<<PVR2_SUBSYS_B_ENC_RUN) | \ |
| (1<<PVR2_SUBSYS_B_ENC_FIRMWARE) | \ |
| (1<<PVR2_SUBSYS_B_USBSTREAM_RUN)) |
| |
| /* |
| |
| This single function is key to pretty much everything. The pvrusb2 |
| device can logically be viewed as a series of subsystems which can be |
| stopped / started or unconfigured / configured. To get things streaming, |
| one must configure everything and start everything, but there may be |
| various reasons over time to deconfigure something or stop something. |
| This function handles all of this activity. Everything EVERYWHERE that |
| must affect a subsystem eventually comes here to do the work. |
| |
| The current state of all subsystems is represented by a single bit mask, |
| known as subsys_enabled_mask. The bit positions are defined by the |
| PVR2_SUBSYS_xxxx macros, with one subsystem per bit position. At any |
| time the set of configured or active subsystems can be queried just by |
| looking at that mask. To change bits in that mask, this function here |
| must be called. The "msk" argument indicates which bit positions to |
| change, and the "val" argument defines the new values for the positions |
| defined by "msk". |
| |
| There is a priority ordering of starting / stopping things, and for |
| multiple requested changes, this function implements that ordering. |
| (Thus we will act on a request to load encoder firmware before we |
| configure the encoder.) In addition to priority ordering, there is a |
| recovery strategy implemented here. If a particular step fails and we |
| detect that failure, this function will clear the affected subsystem bits |
| and restart. Thus we have a means for recovering from a dead encoder: |
| Clear all bits that correspond to subsystems that we need to restart / |
| reconfigure and start over. |
| |
| */ |
| static void pvr2_hdw_subsys_bit_chg_no_lock(struct pvr2_hdw *hdw, |
| unsigned long msk, |
| unsigned long val) |
| { |
| unsigned long nmsk; |
| unsigned long vmsk; |
| int ret; |
| unsigned int tryCount = 0; |
| |
| if (!hdw->flag_ok) return; |
| |
| msk &= PVR2_SUBSYS_ALL; |
| nmsk = (hdw->subsys_enabled_mask & ~msk) | (val & msk); |
| nmsk &= PVR2_SUBSYS_ALL; |
| |
| for (;;) { |
| tryCount++; |
| if (!((nmsk ^ hdw->subsys_enabled_mask) & |
| PVR2_SUBSYS_ALL)) break; |
| if (tryCount > 4) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "Too many retries when configuring device;" |
| " giving up"); |
| pvr2_hdw_render_useless(hdw); |
| break; |
| } |
| if (tryCount > 1) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "Retrying device reconfiguration"); |
| } |
| pvr2_trace(PVR2_TRACE_INIT, |
| "subsys mask changing 0x%lx:0x%lx" |
| " from 0x%lx to 0x%lx", |
| msk,val,hdw->subsys_enabled_mask,nmsk); |
| |
| vmsk = (nmsk ^ hdw->subsys_enabled_mask) & |
| hdw->subsys_enabled_mask; |
| if (vmsk) { |
| if (vmsk & (1<<PVR2_SUBSYS_B_ENC_RUN)) { |
| pvr2_trace(PVR2_TRACE_CTL, |
| "/*---TRACE_CTL----*/" |
| " pvr2_encoder_stop"); |
| ret = pvr2_encoder_stop(hdw); |
| if (ret) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "Error recovery initiated"); |
| hdw->subsys_enabled_mask &= |
| ~FIRMWARE_RECOVERY_BITS; |
| continue; |
| } |
| } |
| if (vmsk & (1<<PVR2_SUBSYS_B_USBSTREAM_RUN)) { |
| pvr2_trace(PVR2_TRACE_CTL, |
| "/*---TRACE_CTL----*/" |
| " pvr2_hdw_cmd_usbstream(0)"); |
| pvr2_hdw_cmd_usbstream(hdw,0); |
| } |
| if (vmsk & (1<<PVR2_SUBSYS_B_DIGITIZER_RUN)) { |
| pvr2_trace(PVR2_TRACE_CTL, |
| "/*---TRACE_CTL----*/" |
| " decoder disable"); |
| if (hdw->decoder_ctrl) { |
| hdw->decoder_ctrl->enable( |
| hdw->decoder_ctrl->ctxt,0); |
| } else { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "WARNING:" |
| " No decoder present"); |
| } |
| hdw->subsys_enabled_mask &= |
| ~(1<<PVR2_SUBSYS_B_DIGITIZER_RUN); |
| } |
| if (vmsk & PVR2_SUBSYS_CFG_ALL) { |
| hdw->subsys_enabled_mask &= |
| ~(vmsk & PVR2_SUBSYS_CFG_ALL); |
| } |
| } |
| vmsk = (nmsk ^ hdw->subsys_enabled_mask) & nmsk; |
| if (vmsk) { |
| if (vmsk & (1<<PVR2_SUBSYS_B_ENC_FIRMWARE)) { |
| pvr2_trace(PVR2_TRACE_CTL, |
| "/*---TRACE_CTL----*/" |
| " pvr2_upload_firmware2"); |
| ret = pvr2_upload_firmware2(hdw); |
| if (ret) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "Failure uploading encoder" |
| " firmware"); |
| pvr2_hdw_render_useless(hdw); |
| break; |
| } |
| } |
| if (vmsk & (1<<PVR2_SUBSYS_B_ENC_CFG)) { |
| pvr2_trace(PVR2_TRACE_CTL, |
| "/*---TRACE_CTL----*/" |
| " pvr2_encoder_configure"); |
| ret = pvr2_encoder_configure(hdw); |
| if (ret) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "Error recovery initiated"); |
| hdw->subsys_enabled_mask &= |
| ~FIRMWARE_RECOVERY_BITS; |
| continue; |
| } |
| } |
| if (vmsk & (1<<PVR2_SUBSYS_B_DIGITIZER_RUN)) { |
| pvr2_trace(PVR2_TRACE_CTL, |
| "/*---TRACE_CTL----*/" |
| " decoder enable"); |
| if (hdw->decoder_ctrl) { |
| hdw->decoder_ctrl->enable( |
| hdw->decoder_ctrl->ctxt,!0); |
| } else { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "WARNING:" |
| " No decoder present"); |
| } |
| hdw->subsys_enabled_mask |= |
| (1<<PVR2_SUBSYS_B_DIGITIZER_RUN); |
| } |
| if (vmsk & (1<<PVR2_SUBSYS_B_USBSTREAM_RUN)) { |
| pvr2_trace(PVR2_TRACE_CTL, |
| "/*---TRACE_CTL----*/" |
| " pvr2_hdw_cmd_usbstream(1)"); |
| pvr2_hdw_cmd_usbstream(hdw,!0); |
| } |
| if (vmsk & (1<<PVR2_SUBSYS_B_ENC_RUN)) { |
| pvr2_trace(PVR2_TRACE_CTL, |
| "/*---TRACE_CTL----*/" |
| " pvr2_encoder_start"); |
| ret = pvr2_encoder_start(hdw); |
| if (ret) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "Error recovery initiated"); |
| hdw->subsys_enabled_mask &= |
| ~FIRMWARE_RECOVERY_BITS; |
| continue; |
| } |
| } |
| } |
| } |
| } |
| |
| |
| void pvr2_hdw_subsys_bit_chg(struct pvr2_hdw *hdw, |
| unsigned long msk,unsigned long val) |
| { |
| LOCK_TAKE(hdw->big_lock); do { |
| pvr2_hdw_subsys_bit_chg_no_lock(hdw,msk,val); |
| } while (0); LOCK_GIVE(hdw->big_lock); |
| } |
| |
| |
| unsigned long pvr2_hdw_subsys_get(struct pvr2_hdw *hdw) |
| { |
| return hdw->subsys_enabled_mask; |
| } |
| |
| |
| unsigned long pvr2_hdw_subsys_stream_get(struct pvr2_hdw *hdw) |
| { |
| return hdw->subsys_stream_mask; |
| } |
| |
| |
| static void pvr2_hdw_subsys_stream_bit_chg_no_lock(struct pvr2_hdw *hdw, |
| unsigned long msk, |
| unsigned long val) |
| { |
| unsigned long val2; |
| msk &= PVR2_SUBSYS_ALL; |
| val2 = ((hdw->subsys_stream_mask & ~msk) | (val & msk)); |
| pvr2_trace(PVR2_TRACE_INIT, |
| "stream mask changing 0x%lx:0x%lx from 0x%lx to 0x%lx", |
| msk,val,hdw->subsys_stream_mask,val2); |
| hdw->subsys_stream_mask = val2; |
| } |
| |
| |
| void pvr2_hdw_subsys_stream_bit_chg(struct pvr2_hdw *hdw, |
| unsigned long msk, |
| unsigned long val) |
| { |
| LOCK_TAKE(hdw->big_lock); do { |
| pvr2_hdw_subsys_stream_bit_chg_no_lock(hdw,msk,val); |
| } while (0); LOCK_GIVE(hdw->big_lock); |
| } |
| |
| |
| static int pvr2_hdw_set_streaming_no_lock(struct pvr2_hdw *hdw,int enableFl) |
| { |
| if ((!enableFl) == !(hdw->flag_streaming_enabled)) return 0; |
| if (enableFl) { |
| pvr2_trace(PVR2_TRACE_START_STOP, |
| "/*--TRACE_STREAM--*/ enable"); |
| pvr2_hdw_subsys_bit_chg_no_lock(hdw,~0,~0); |
| } else { |
| pvr2_trace(PVR2_TRACE_START_STOP, |
| "/*--TRACE_STREAM--*/ disable"); |
| pvr2_hdw_subsys_bit_chg_no_lock(hdw,hdw->subsys_stream_mask,0); |
| } |
| if (!hdw->flag_ok) return -EIO; |
| hdw->flag_streaming_enabled = enableFl != 0; |
| return 0; |
| } |
| |
| |
| int pvr2_hdw_get_streaming(struct pvr2_hdw *hdw) |
| { |
| return hdw->flag_streaming_enabled != 0; |
| } |
| |
| |
| int pvr2_hdw_set_streaming(struct pvr2_hdw *hdw,int enable_flag) |
| { |
| int ret; |
| LOCK_TAKE(hdw->big_lock); do { |
| ret = pvr2_hdw_set_streaming_no_lock(hdw,enable_flag); |
| } while (0); LOCK_GIVE(hdw->big_lock); |
| return ret; |
| } |
| |
| |
| static int pvr2_hdw_set_stream_type_no_lock(struct pvr2_hdw *hdw, |
| enum pvr2_config config) |
| { |
| unsigned long sm = hdw->subsys_enabled_mask; |
| if (!hdw->flag_ok) return -EIO; |
| pvr2_hdw_subsys_bit_chg_no_lock(hdw,hdw->subsys_stream_mask,0); |
| hdw->config = config; |
| pvr2_hdw_subsys_bit_chg_no_lock(hdw,~0,sm); |
| return 0; |
| } |
| |
| |
| int pvr2_hdw_set_stream_type(struct pvr2_hdw *hdw,enum pvr2_config config) |
| { |
| int ret; |
| if (!hdw->flag_ok) return -EIO; |
| LOCK_TAKE(hdw->big_lock); |
| ret = pvr2_hdw_set_stream_type_no_lock(hdw,config); |
| LOCK_GIVE(hdw->big_lock); |
| return ret; |
| } |
| |
| |
| static int get_default_tuner_type(struct pvr2_hdw *hdw) |
| { |
| int unit_number = hdw->unit_number; |
| int tp = -1; |
| if ((unit_number >= 0) && (unit_number < PVR_NUM)) { |
| tp = tuner[unit_number]; |
| } |
| if (tp < 0) return -EINVAL; |
| hdw->tuner_type = tp; |
| return 0; |
| } |
| |
| |
| static v4l2_std_id get_default_standard(struct pvr2_hdw *hdw) |
| { |
| int unit_number = hdw->unit_number; |
| int tp = 0; |
| if ((unit_number >= 0) && (unit_number < PVR_NUM)) { |
| tp = video_std[unit_number]; |
| } |
| return tp; |
| } |
| |
| |
| static unsigned int get_default_error_tolerance(struct pvr2_hdw *hdw) |
| { |
| int unit_number = hdw->unit_number; |
| int tp = 0; |
| if ((unit_number >= 0) && (unit_number < PVR_NUM)) { |
| tp = tolerance[unit_number]; |
| } |
| return tp; |
| } |
| |
| |
| static int pvr2_hdw_check_firmware(struct pvr2_hdw *hdw) |
| { |
| /* Try a harmless request to fetch the eeprom's address over |
| endpoint 1. See what happens. Only the full FX2 image can |
| respond to this. If this probe fails then likely the FX2 |
| firmware needs be loaded. */ |
| int result; |
| LOCK_TAKE(hdw->ctl_lock); do { |
| hdw->cmd_buffer[0] = 0xeb; |
| result = pvr2_send_request_ex(hdw,HZ*1,!0, |
| hdw->cmd_buffer,1, |
| hdw->cmd_buffer,1); |
| if (result < 0) break; |
| } while(0); LOCK_GIVE(hdw->ctl_lock); |
| if (result) { |
| pvr2_trace(PVR2_TRACE_INIT, |
| "Probe of device endpoint 1 result status %d", |
| result); |
| } else { |
| pvr2_trace(PVR2_TRACE_INIT, |
| "Probe of device endpoint 1 succeeded"); |
| } |
| return result == 0; |
| } |
| |
| static void pvr2_hdw_setup_std(struct pvr2_hdw *hdw) |
| { |
| char buf[40]; |
| unsigned int bcnt; |
| v4l2_std_id std1,std2; |
| |
| std1 = get_default_standard(hdw); |
| |
| bcnt = pvr2_std_id_to_str(buf,sizeof(buf),hdw->std_mask_eeprom); |
| pvr2_trace(PVR2_TRACE_INIT, |
| "Supported video standard(s) reported by eeprom: %.*s", |
| bcnt,buf); |
| |
| hdw->std_mask_avail = hdw->std_mask_eeprom; |
| |
| std2 = std1 & ~hdw->std_mask_avail; |
| if (std2) { |
| bcnt = pvr2_std_id_to_str(buf,sizeof(buf),std2); |
| pvr2_trace(PVR2_TRACE_INIT, |
| "Expanding supported video standards" |
| " to include: %.*s", |
| bcnt,buf); |
| hdw->std_mask_avail |= std2; |
| } |
| |
| pvr2_hdw_internal_set_std_avail(hdw); |
| |
| if (std1) { |
| bcnt = pvr2_std_id_to_str(buf,sizeof(buf),std1); |
| pvr2_trace(PVR2_TRACE_INIT, |
| "Initial video standard forced to %.*s", |
| bcnt,buf); |
| hdw->std_mask_cur = std1; |
| hdw->std_dirty = !0; |
| pvr2_hdw_internal_find_stdenum(hdw); |
| return; |
| } |
| |
| if (hdw->std_enum_cnt > 1) { |
| // Autoselect the first listed standard |
| hdw->std_enum_cur = 1; |
| hdw->std_mask_cur = hdw->std_defs[hdw->std_enum_cur-1].id; |
| hdw->std_dirty = !0; |
| pvr2_trace(PVR2_TRACE_INIT, |
| "Initial video standard auto-selected to %s", |
| hdw->std_defs[hdw->std_enum_cur-1].name); |
| return; |
| } |
| |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "Unable to select a viable initial video standard"); |
| } |
| |
| |
| static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw) |
| { |
| int ret; |
| unsigned int idx; |
| struct pvr2_ctrl *cptr; |
| int reloadFl = 0; |
| if (!reloadFl) { |
| reloadFl = (hdw->usb_intf->cur_altsetting->desc.bNumEndpoints |
| == 0); |
| if (reloadFl) { |
| pvr2_trace(PVR2_TRACE_INIT, |
| "USB endpoint config looks strange" |
| "; possibly firmware needs to be loaded"); |
| } |
| } |
| if (!reloadFl) { |
| reloadFl = !pvr2_hdw_check_firmware(hdw); |
| if (reloadFl) { |
| pvr2_trace(PVR2_TRACE_INIT, |
| "Check for FX2 firmware failed" |
| "; possibly firmware needs to be loaded"); |
| } |
| } |
| if (reloadFl) { |
| if (pvr2_upload_firmware1(hdw) != 0) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "Failure uploading firmware1"); |
| } |
| return; |
| } |
| hdw->fw1_state = FW1_STATE_OK; |
| |
| if (initusbreset) { |
| pvr2_hdw_device_reset(hdw); |
| } |
| if (!pvr2_hdw_dev_ok(hdw)) return; |
| |
| for (idx = 0; idx < pvr2_client_lists[hdw->hdw_type].cnt; idx++) { |
| request_module(pvr2_client_lists[hdw->hdw_type].lst[idx]); |
| } |
| |
| pvr2_hdw_cmd_powerup(hdw); |
| if (!pvr2_hdw_dev_ok(hdw)) return; |
| |
| if (pvr2_upload_firmware2(hdw)){ |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS,"device unstable!!"); |
| pvr2_hdw_render_useless(hdw); |
| return; |
| } |
| |
| // This step MUST happen after the earlier powerup step. |
| pvr2_i2c_core_init(hdw); |
| if (!pvr2_hdw_dev_ok(hdw)) return; |
| |
| for (idx = 0; idx < CTRLDEF_COUNT; idx++) { |
| cptr = hdw->controls + idx; |
| if (cptr->info->skip_init) continue; |
| if (!cptr->info->set_value) continue; |
| cptr->info->set_value(cptr,~0,cptr->info->default_value); |
| } |
| |
| // Do not use pvr2_reset_ctl_endpoints() here. It is not |
| // thread-safe against the normal pvr2_send_request() mechanism. |
| // (We should make it thread safe). |
| |
| ret = pvr2_hdw_get_eeprom_addr(hdw); |
| if (!pvr2_hdw_dev_ok(hdw)) return; |
| if (ret < 0) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "Unable to determine location of eeprom, skipping"); |
| } else { |
| hdw->eeprom_addr = ret; |
| pvr2_eeprom_analyze(hdw); |
| if (!pvr2_hdw_dev_ok(hdw)) return; |
| } |
| |
| pvr2_hdw_setup_std(hdw); |
| |
| if (!get_default_tuner_type(hdw)) { |
| pvr2_trace(PVR2_TRACE_INIT, |
| "pvr2_hdw_setup: Tuner type overridden to %d", |
| hdw->tuner_type); |
| } |
| |
| hdw->tuner_updated = !0; |
| pvr2_i2c_core_check_stale(hdw); |
| hdw->tuner_updated = 0; |
| |
| if (!pvr2_hdw_dev_ok(hdw)) return; |
| |
| pvr2_hdw_commit_ctl_internal(hdw); |
| if (!pvr2_hdw_dev_ok(hdw)) return; |
| |
| hdw->vid_stream = pvr2_stream_create(); |
| if (!pvr2_hdw_dev_ok(hdw)) return; |
| pvr2_trace(PVR2_TRACE_INIT, |
| "pvr2_hdw_setup: video stream is %p",hdw->vid_stream); |
| if (hdw->vid_stream) { |
| idx = get_default_error_tolerance(hdw); |
| if (idx) { |
| pvr2_trace(PVR2_TRACE_INIT, |
| "pvr2_hdw_setup: video stream %p" |
| " setting tolerance %u", |
| hdw->vid_stream,idx); |
| } |
| pvr2_stream_setup(hdw->vid_stream,hdw->usb_dev, |
| PVR2_VID_ENDPOINT,idx); |
| } |
| |
| if (!pvr2_hdw_dev_ok(hdw)) return; |
| |
| /* Make sure everything is up to date */ |
| pvr2_i2c_core_sync(hdw); |
| |
| if (!pvr2_hdw_dev_ok(hdw)) return; |
| |
| hdw->flag_init_ok = !0; |
| } |
| |
| |
| int pvr2_hdw_setup(struct pvr2_hdw *hdw) |
| { |
| pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_setup(hdw=%p) begin",hdw); |
| LOCK_TAKE(hdw->big_lock); do { |
| pvr2_hdw_setup_low(hdw); |
| pvr2_trace(PVR2_TRACE_INIT, |
| "pvr2_hdw_setup(hdw=%p) done, ok=%d init_ok=%d", |
| hdw,hdw->flag_ok,hdw->flag_init_ok); |
| if (pvr2_hdw_dev_ok(hdw)) { |
| if (pvr2_hdw_init_ok(hdw)) { |
| pvr2_trace( |
| PVR2_TRACE_INFO, |
| "Device initialization" |
| " completed successfully."); |
| break; |
| } |
| if (hdw->fw1_state == FW1_STATE_RELOAD) { |
| pvr2_trace( |
| PVR2_TRACE_INFO, |
| "Device microcontroller firmware" |
| " (re)loaded; it should now reset" |
| " and reconnect."); |
| break; |
| } |
| pvr2_trace( |
| PVR2_TRACE_ERROR_LEGS, |
| "Device initialization was not successful."); |
| if (hdw->fw1_state == FW1_STATE_MISSING) { |
| pvr2_trace( |
| PVR2_TRACE_ERROR_LEGS, |
| "Giving up since device" |
| " microcontroller firmware" |
| " appears to be missing."); |
| break; |
| } |
| } |
| if (procreload) { |
| pvr2_trace( |
| PVR2_TRACE_ERROR_LEGS, |
| "Attempting pvrusb2 recovery by reloading" |
| " primary firmware."); |
| pvr2_trace( |
| PVR2_TRACE_ERROR_LEGS, |
| "If this works, device should disconnect" |
| " and reconnect in a sane state."); |
| hdw->fw1_state = FW1_STATE_UNKNOWN; |
| pvr2_upload_firmware1(hdw); |
| } else { |
| pvr2_trace( |
| PVR2_TRACE_ERROR_LEGS, |
| "***WARNING*** pvrusb2 device hardware" |
| " appears to be jammed" |
| " and I can't clear it."); |
| pvr2_trace( |
| PVR2_TRACE_ERROR_LEGS, |
| "You might need to power cycle" |
| " the pvrusb2 device" |
| " in order to recover."); |
| } |
| } while (0); LOCK_GIVE(hdw->big_lock); |
| pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_setup(hdw=%p) end",hdw); |
| return hdw->flag_init_ok; |
| } |
| |
| |
| /* Create and return a structure for interacting with the underlying |
| hardware */ |
| struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf, |
| const struct usb_device_id *devid) |
| { |
| unsigned int idx,cnt1,cnt2; |
| struct pvr2_hdw *hdw; |
| unsigned int hdw_type; |
| int valid_std_mask; |
| struct pvr2_ctrl *cptr; |
| __u8 ifnum; |
| struct v4l2_queryctrl qctrl; |
| struct pvr2_ctl_info *ciptr; |
| |
| hdw_type = devid - pvr2_device_table; |
| if (hdw_type >= |
| sizeof(pvr2_device_names)/sizeof(pvr2_device_names[0])) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "Bogus device type of %u reported",hdw_type); |
| return NULL; |
| } |
| |
| hdw = kmalloc(sizeof(*hdw),GFP_KERNEL); |
| pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_create: hdw=%p, type \"%s\"", |
| hdw,pvr2_device_names[hdw_type]); |
| if (!hdw) goto fail; |
| memset(hdw,0,sizeof(*hdw)); |
| cx2341x_fill_defaults(&hdw->enc_ctl_state); |
| |
| hdw->control_cnt = CTRLDEF_COUNT; |
| hdw->control_cnt += MPEGDEF_COUNT; |
| hdw->controls = kmalloc(sizeof(struct pvr2_ctrl) * hdw->control_cnt, |
| GFP_KERNEL); |
| if (!hdw->controls) goto fail; |
| memset(hdw->controls,0,sizeof(struct pvr2_ctrl) * hdw->control_cnt); |
| hdw->hdw_type = hdw_type; |
| for (idx = 0; idx < hdw->control_cnt; idx++) { |
| cptr = hdw->controls + idx; |
| cptr->hdw = hdw; |
| } |
| for (idx = 0; idx < 32; idx++) { |
| hdw->std_mask_ptrs[idx] = hdw->std_mask_names[idx]; |
| } |
| for (idx = 0; idx < CTRLDEF_COUNT; idx++) { |
| cptr = hdw->controls + idx; |
| cptr->info = control_defs+idx; |
| } |
| /* Define and configure additional controls from cx2341x module. */ |
| hdw->mpeg_ctrl_info = kmalloc( |
| sizeof(*(hdw->mpeg_ctrl_info)) * MPEGDEF_COUNT, GFP_KERNEL); |
| if (!hdw->mpeg_ctrl_info) goto fail; |
| memset(hdw->mpeg_ctrl_info,0, |
| sizeof(*(hdw->mpeg_ctrl_info)) * MPEGDEF_COUNT); |
| for (idx = 0; idx < MPEGDEF_COUNT; idx++) { |
| cptr = hdw->controls + idx + CTRLDEF_COUNT; |
| ciptr = &(hdw->mpeg_ctrl_info[idx].info); |
| ciptr->desc = hdw->mpeg_ctrl_info[idx].desc; |
| ciptr->name = mpeg_ids[idx].strid; |
| ciptr->v4l_id = mpeg_ids[idx].id; |
| ciptr->skip_init = !0; |
| ciptr->get_value = ctrl_cx2341x_get; |
| ciptr->get_v4lflags = ctrl_cx2341x_getv4lflags; |
| ciptr->is_dirty = ctrl_cx2341x_is_dirty; |
| if (!idx) ciptr->clear_dirty = ctrl_cx2341x_clear_dirty; |
| qctrl.id = ciptr->v4l_id; |
| cx2341x_ctrl_query(&hdw->enc_ctl_state,&qctrl); |
| if (!(qctrl.flags & V4L2_CTRL_FLAG_READ_ONLY)) { |
| ciptr->set_value = ctrl_cx2341x_set; |
| } |
| strncpy(hdw->mpeg_ctrl_info[idx].desc,qctrl.name, |
| PVR2_CTLD_INFO_DESC_SIZE); |
| hdw->mpeg_ctrl_info[idx].desc[PVR2_CTLD_INFO_DESC_SIZE-1] = 0; |
| ciptr->default_value = qctrl.default_value; |
| switch (qctrl.type) { |
| default: |
| case V4L2_CTRL_TYPE_INTEGER: |
| ciptr->type = pvr2_ctl_int; |
| ciptr->def.type_int.min_value = qctrl.minimum; |
| ciptr->def.type_int.max_value = qctrl.maximum; |
| break; |
| case V4L2_CTRL_TYPE_BOOLEAN: |
| ciptr->type = pvr2_ctl_bool; |
| break; |
| case V4L2_CTRL_TYPE_MENU: |
| ciptr->type = pvr2_ctl_enum; |
| ciptr->def.type_enum.value_names = |
| cx2341x_ctrl_get_menu(ciptr->v4l_id); |
| for (cnt1 = 0; |
| ciptr->def.type_enum.value_names[cnt1] != NULL; |
| cnt1++) { } |
| ciptr->def.type_enum.count = cnt1; |
| break; |
| } |
| cptr->info = ciptr; |
| } |
| |
| // Initialize video standard enum dynamic control |
| cptr = pvr2_hdw_get_ctrl_by_id(hdw,PVR2_CID_STDENUM); |
| if (cptr) { |
| memcpy(&hdw->std_info_enum,cptr->info, |
| sizeof(hdw->std_info_enum)); |
| cptr->info = &hdw->std_info_enum; |
| |
| } |
| // Initialize control data regarding video standard masks |
| valid_std_mask = pvr2_std_get_usable(); |
| for (idx = 0; idx < 32; idx++) { |
| if (!(valid_std_mask & (1 << idx))) continue; |
| cnt1 = pvr2_std_id_to_str( |
| hdw->std_mask_names[idx], |
| sizeof(hdw->std_mask_names[idx])-1, |
| 1 << idx); |
| hdw->std_mask_names[idx][cnt1] = 0; |
| } |
| cptr = pvr2_hdw_get_ctrl_by_id(hdw,PVR2_CID_STDAVAIL); |
| if (cptr) { |
| memcpy(&hdw->std_info_avail,cptr->info, |
| sizeof(hdw->std_info_avail)); |
| cptr->info = &hdw->std_info_avail; |
| hdw->std_info_avail.def.type_bitmask.bit_names = |
| hdw->std_mask_ptrs; |
| hdw->std_info_avail.def.type_bitmask.valid_bits = |
| valid_std_mask; |
| } |
| cptr = pvr2_hdw_get_ctrl_by_id(hdw,PVR2_CID_STDCUR); |
| if (cptr) { |
| memcpy(&hdw->std_info_cur,cptr->info, |
| sizeof(hdw->std_info_cur)); |
| cptr->info = &hdw->std_info_cur; |
| hdw->std_info_cur.def.type_bitmask.bit_names = |
| hdw->std_mask_ptrs; |
| hdw->std_info_avail.def.type_bitmask.valid_bits = |
| valid_std_mask; |
| } |
| |
| hdw->eeprom_addr = -1; |
| hdw->unit_number = -1; |
| hdw->v4l_minor_number_mpeg = -1; |
| hdw->v4l_minor_number_radio = -1; |
| hdw->ctl_write_buffer = kmalloc(PVR2_CTL_BUFFSIZE,GFP_KERNEL); |
| if (!hdw->ctl_write_buffer) goto fail; |
| hdw->ctl_read_buffer = kmalloc(PVR2_CTL_BUFFSIZE,GFP_KERNEL); |
| if (!hdw->ctl_read_buffer) goto fail; |
| hdw->ctl_write_urb = usb_alloc_urb(0,GFP_KERNEL); |
| if (!hdw->ctl_write_urb) goto fail; |
| hdw->ctl_read_urb = usb_alloc_urb(0,GFP_KERNEL); |
| if (!hdw->ctl_read_urb) goto fail; |
| |
| down(&pvr2_unit_sem); do { |
| for (idx = 0; idx < PVR_NUM; idx++) { |
| if (unit_pointers[idx]) continue; |
| hdw->unit_number = idx; |
| unit_pointers[idx] = hdw; |
| break; |
| } |
| } while (0); up(&pvr2_unit_sem); |
| |
| cnt1 = 0; |
| cnt2 = scnprintf(hdw->name+cnt1,sizeof(hdw->name)-cnt1,"pvrusb2"); |
| cnt1 += cnt2; |
| if (hdw->unit_number >= 0) { |
| cnt2 = scnprintf(hdw->name+cnt1,sizeof(hdw->name)-cnt1,"_%c", |
| ('a' + hdw->unit_number)); |
| cnt1 += cnt2; |
| } |
| if (cnt1 >= sizeof(hdw->name)) cnt1 = sizeof(hdw->name)-1; |
| hdw->name[cnt1] = 0; |
| |
| pvr2_trace(PVR2_TRACE_INIT,"Driver unit number is %d, name is %s", |
| hdw->unit_number,hdw->name); |
| |
| hdw->tuner_type = -1; |
| hdw->flag_ok = !0; |
| /* Initialize the mask of subsystems that we will shut down when we |
| stop streaming. */ |
| hdw->subsys_stream_mask = PVR2_SUBSYS_RUN_ALL; |
| hdw->subsys_stream_mask |= (1<<PVR2_SUBSYS_B_ENC_CFG); |
| |
| pvr2_trace(PVR2_TRACE_INIT,"subsys_stream_mask: 0x%lx", |
| hdw->subsys_stream_mask); |
| |
| hdw->usb_intf = intf; |
| hdw->usb_dev = interface_to_usbdev(intf); |
| |
| ifnum = hdw->usb_intf->cur_altsetting->desc.bInterfaceNumber; |
| usb_set_interface(hdw->usb_dev,ifnum,0); |
| |
| mutex_init(&hdw->ctl_lock_mutex); |
| mutex_init(&hdw->big_lock_mutex); |
| |
| return hdw; |
| fail: |
| if (hdw) { |
| usb_free_urb(hdw->ctl_read_urb); |
| usb_free_urb(hdw->ctl_write_urb); |
| kfree(hdw->ctl_read_buffer); |
| kfree(hdw->ctl_write_buffer); |
| kfree(hdw->controls); |
| kfree(hdw->mpeg_ctrl_info); |
| kfree(hdw); |
| } |
| return NULL; |
| } |
| |
| |
| /* Remove _all_ associations between this driver and the underlying USB |
| layer. */ |
| static void pvr2_hdw_remove_usb_stuff(struct pvr2_hdw *hdw) |
| { |
| if (hdw->flag_disconnected) return; |
| pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_remove_usb_stuff: hdw=%p",hdw); |
| if (hdw->ctl_read_urb) { |
| usb_kill_urb(hdw->ctl_read_urb); |
| usb_free_urb(hdw->ctl_read_urb); |
| hdw->ctl_read_urb = NULL; |
| } |
| if (hdw->ctl_write_urb) { |
| usb_kill_urb(hdw->ctl_write_urb); |
| usb_free_urb(hdw->ctl_write_urb); |
| hdw->ctl_write_urb = NULL; |
| } |
| if (hdw->ctl_read_buffer) { |
| kfree(hdw->ctl_read_buffer); |
| hdw->ctl_read_buffer = NULL; |
| } |
| if (hdw->ctl_write_buffer) { |
| kfree(hdw->ctl_write_buffer); |
| hdw->ctl_write_buffer = NULL; |
| } |
| pvr2_hdw_render_useless_unlocked(hdw); |
| hdw->flag_disconnected = !0; |
| hdw->usb_dev = NULL; |
| hdw->usb_intf = NULL; |
| } |
| |
| |
| /* Destroy hardware interaction structure */ |
| void pvr2_hdw_destroy(struct pvr2_hdw *hdw) |
| { |
| pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_destroy: hdw=%p",hdw); |
| if (hdw->fw_buffer) { |
| kfree(hdw->fw_buffer); |
| hdw->fw_buffer = NULL; |
| } |
| if (hdw->vid_stream) { |
| pvr2_stream_destroy(hdw->vid_stream); |
| hdw->vid_stream = NULL; |
| } |
| if (hdw->audio_stat) { |
| hdw->audio_stat->detach(hdw->audio_stat->ctxt); |
| } |
| if (hdw->decoder_ctrl) { |
| hdw->decoder_ctrl->detach(hdw->decoder_ctrl->ctxt); |
| } |
| pvr2_i2c_core_done(hdw); |
| pvr2_hdw_remove_usb_stuff(hdw); |
| down(&pvr2_unit_sem); do { |
| if ((hdw->unit_number >= 0) && |
| (hdw->unit_number < PVR_NUM) && |
| (unit_pointers[hdw->unit_number] == hdw)) { |
| unit_pointers[hdw->unit_number] = NULL; |
| } |
| } while (0); up(&pvr2_unit_sem); |
| kfree(hdw->controls); |
| kfree(hdw->mpeg_ctrl_info); |
| kfree(hdw->std_defs); |
| kfree(hdw->std_enum_names); |
| kfree(hdw); |
| } |
| |
| |
| int pvr2_hdw_init_ok(struct pvr2_hdw *hdw) |
| { |
| return hdw->flag_init_ok; |
| } |
| |
| |
| int pvr2_hdw_dev_ok(struct pvr2_hdw *hdw) |
| { |
| return (hdw && hdw->flag_ok); |
| } |
| |
| |
| /* Called when hardware has been unplugged */ |
| void pvr2_hdw_disconnect(struct pvr2_hdw *hdw) |
| { |
| pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_disconnect(hdw=%p)",hdw); |
| LOCK_TAKE(hdw->big_lock); |
| LOCK_TAKE(hdw->ctl_lock); |
| pvr2_hdw_remove_usb_stuff(hdw); |
| LOCK_GIVE(hdw->ctl_lock); |
| LOCK_GIVE(hdw->big_lock); |
| } |
| |
| |
| // Attempt to autoselect an appropriate value for std_enum_cur given |
| // whatever is currently in std_mask_cur |
| static void pvr2_hdw_internal_find_stdenum(struct pvr2_hdw *hdw) |
| { |
| unsigned int idx; |
| for (idx = 1; idx < hdw->std_enum_cnt; idx++) { |
| if (hdw->std_defs[idx-1].id == hdw->std_mask_cur) { |
| hdw->std_enum_cur = idx; |
| return; |
| } |
| } |
| hdw->std_enum_cur = 0; |
| } |
| |
| |
| // Calculate correct set of enumerated standards based on currently known |
| // set of available standards bits. |
| static void pvr2_hdw_internal_set_std_avail(struct pvr2_hdw *hdw) |
| { |
| struct v4l2_standard *newstd; |
| unsigned int std_cnt; |
| unsigned int idx; |
| |
| newstd = pvr2_std_create_enum(&std_cnt,hdw->std_mask_avail); |
| |
| if (hdw->std_defs) { |
| kfree(hdw->std_defs); |
| hdw->std_defs = NULL; |
| } |
| hdw->std_enum_cnt = 0; |
| if (hdw->std_enum_names) { |
| kfree(hdw->std_enum_names); |
| hdw->std_enum_names = NULL; |
| } |
| |
| if (!std_cnt) { |
| pvr2_trace( |
| PVR2_TRACE_ERROR_LEGS, |
| "WARNING: Failed to identify any viable standards"); |
| } |
| hdw->std_enum_names = kmalloc(sizeof(char *)*(std_cnt+1),GFP_KERNEL); |
| hdw->std_enum_names[0] = "none"; |
| for (idx = 0; idx < std_cnt; idx++) { |
| hdw->std_enum_names[idx+1] = |
| newstd[idx].name; |
| } |
| // Set up the dynamic control for this standard |
| hdw->std_info_enum.def.type_enum.value_names = hdw->std_enum_names; |
| hdw->std_info_enum.def.type_enum.count = std_cnt+1; |
| hdw->std_defs = newstd; |
| hdw->std_enum_cnt = std_cnt+1; |
| hdw->std_enum_cur = 0; |
| hdw->std_info_cur.def.type_bitmask.valid_bits = hdw->std_mask_avail; |
| } |
| |
| |
| int pvr2_hdw_get_stdenum_value(struct pvr2_hdw *hdw, |
| struct v4l2_standard *std, |
| unsigned int idx) |
| { |
| int ret = -EINVAL; |
| if (!idx) return ret; |
| LOCK_TAKE(hdw->big_lock); do { |
| if (idx >= hdw->std_enum_cnt) break; |
| idx--; |
| memcpy(std,hdw->std_defs+idx,sizeof(*std)); |
| ret = 0; |
| } while (0); LOCK_GIVE(hdw->big_lock); |
| return ret; |
| } |
| |
| |
| /* Get the number of defined controls */ |
| unsigned int pvr2_hdw_get_ctrl_count(struct pvr2_hdw *hdw) |
| { |
| return hdw->control_cnt; |
| } |
| |
| |
| /* Retrieve a control handle given its index (0..count-1) */ |
| struct pvr2_ctrl *pvr2_hdw_get_ctrl_by_index(struct pvr2_hdw *hdw, |
| unsigned int idx) |
| { |
| if (idx >= hdw->control_cnt) return NULL; |
| return hdw->controls + idx; |
| } |
| |
| |
| /* Retrieve a control handle given its index (0..count-1) */ |
| struct pvr2_ctrl *pvr2_hdw_get_ctrl_by_id(struct pvr2_hdw *hdw, |
| unsigned int ctl_id) |
| { |
| struct pvr2_ctrl *cptr; |
| unsigned int idx; |
| int i; |
| |
| /* This could be made a lot more efficient, but for now... */ |
| for (idx = 0; idx < hdw->control_cnt; idx++) { |
| cptr = hdw->controls + idx; |
| i = cptr->info->internal_id; |
| if (i && (i == ctl_id)) return cptr; |
| } |
| return NULL; |
| } |
| |
| |
| /* Given a V4L ID, retrieve the control structure associated with it. */ |
| struct pvr2_ctrl *pvr2_hdw_get_ctrl_v4l(struct pvr2_hdw *hdw,unsigned int ctl_id) |
| { |
| struct pvr2_ctrl *cptr; |
| unsigned int idx; |
| int i; |
| |
| /* This could be made a lot more efficient, but for now... */ |
| for (idx = 0; idx < hdw->control_cnt; idx++) { |
| cptr = hdw->controls + idx; |
| i = cptr->info->v4l_id; |
| if (i && (i == ctl_id)) return cptr; |
| } |
| return NULL; |
| } |
| |
| |
| /* Given a V4L ID for its immediate predecessor, retrieve the control |
| structure associated with it. */ |
| struct pvr2_ctrl *pvr2_hdw_get_ctrl_nextv4l(struct pvr2_hdw *hdw, |
| unsigned int ctl_id) |
| { |
| struct pvr2_ctrl *cptr,*cp2; |
| unsigned int idx; |
| int i; |
| |
| /* This could be made a lot more efficient, but for now... */ |
| cp2 = NULL; |
| for (idx = 0; idx < hdw->control_cnt; idx++) { |
| cptr = hdw->controls + idx; |
| i = cptr->info->v4l_id; |
| if (!i) continue; |
| if (i <= ctl_id) continue; |
| if (cp2 && (cp2->info->v4l_id < i)) continue; |
| cp2 = cptr; |
| } |
| return cp2; |
| return NULL; |
| } |
| |
| |
| static const char *get_ctrl_typename(enum pvr2_ctl_type tp) |
| { |
| switch (tp) { |
| case pvr2_ctl_int: return "integer"; |
| case pvr2_ctl_enum: return "enum"; |
| case pvr2_ctl_bool: return "boolean"; |
| case pvr2_ctl_bitmask: return "bitmask"; |
| } |
| return ""; |
| } |
| |
| |
| /* Commit all control changes made up to this point. Subsystems can be |
| indirectly affected by these changes. For a given set of things being |
| committed, we'll clear the affected subsystem bits and then once we're |
| done committing everything we'll make a request to restore the subsystem |
| state(s) back to their previous value before this function was called. |
| Thus we can automatically reconfigure affected pieces of the driver as |
| controls are changed. */ |
| static int pvr2_hdw_commit_ctl_internal(struct pvr2_hdw *hdw) |
| { |
| unsigned long saved_subsys_mask = hdw->subsys_enabled_mask; |
| unsigned long stale_subsys_mask = 0; |
| unsigned int idx; |
| struct pvr2_ctrl *cptr; |
| int value; |
| int commit_flag = 0; |
| char buf[100]; |
| unsigned int bcnt,ccnt; |
| |
| for (idx = 0; idx < hdw->control_cnt; idx++) { |
| cptr = hdw->controls + idx; |
| if (cptr->info->is_dirty == 0) continue; |
| if (!cptr->info->is_dirty(cptr)) continue; |
| if (!commit_flag) { |
| commit_flag = !0; |
| } |
| |
| bcnt = scnprintf(buf,sizeof(buf),"\"%s\" <-- ", |
| cptr->info->name); |
| value = 0; |
| cptr->info->get_value(cptr,&value); |
| pvr2_ctrl_value_to_sym_internal(cptr,~0,value, |
| buf+bcnt, |
| sizeof(buf)-bcnt,&ccnt); |
| bcnt += ccnt; |
| bcnt += scnprintf(buf+bcnt,sizeof(buf)-bcnt," <%s>", |
| get_ctrl_typename(cptr->info->type)); |
| pvr2_trace(PVR2_TRACE_CTL, |
| "/*--TRACE_COMMIT--*/ %.*s", |
| bcnt,buf); |
| } |
| |
| if (!commit_flag) { |
| /* Nothing has changed */ |
| return 0; |
| } |
| |
| /* When video standard changes, reset the hres and vres values - |
| but if the user has pending changes there, then let the changes |
| take priority. */ |
| if (hdw->std_dirty) { |
| /* Rewrite the vertical resolution to be appropriate to the |
| video standard that has been selected. */ |
| int nvres; |
| if (hdw->std_mask_cur & V4L2_STD_525_60) { |
| nvres = 480; |
| } else { |
| nvres = 576; |
| } |
| if (nvres != hdw->res_ver_val) { |
| hdw->res_ver_val = nvres; |
| hdw->res_ver_dirty = !0; |
| } |
| } |
| |
| if (hdw->std_dirty || |
| hdw->enc_stale || |
| hdw->srate_dirty || |
| hdw->res_ver_dirty || |
| hdw->res_hor_dirty || |
| 0) { |
| /* If any of this changes, then the encoder needs to be |
| reconfigured, and we need to reset the stream. */ |
| stale_subsys_mask |= (1<<PVR2_SUBSYS_B_ENC_CFG); |
| } |
| |
| if (hdw->input_dirty) { |
| /* pk: If input changes to or from radio, then the encoder |
| needs to be restarted (for ENC_MUTE_VIDEO to work) */ |
| stale_subsys_mask |= (1<<PVR2_SUBSYS_B_ENC_RUN); |
| } |
| |
| |
| if (hdw->srate_dirty) { |
| /* Write new sample rate into control structure since |
| * the master copy is stale. We must track srate |
| * separate from the mpeg control structure because |
| * other logic also uses this value. */ |
| struct v4l2_ext_controls cs; |
| struct v4l2_ext_control c1; |
| memset(&cs,0,sizeof(cs)); |
| memset(&c1,0,sizeof(c1)); |
| cs.controls = &c1; |
| cs.count = 1; |
| c1.id = V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ; |
| c1.value = hdw->srate_val; |
| cx2341x_ext_ctrls(&hdw->enc_ctl_state,&cs,VIDIOC_S_EXT_CTRLS); |
| } |
| |
| /* Scan i2c core at this point - before we clear all the dirty |
| bits. Various parts of the i2c core will notice dirty bits as |
| appropriate and arrange to broadcast or directly send updates to |
| the client drivers in order to keep everything in sync */ |
| pvr2_i2c_core_check_stale(hdw); |
| |
| for (idx = 0; idx < hdw->control_cnt; idx++) { |
| cptr = hdw->controls + idx; |
| if (!cptr->info->clear_dirty) continue; |
| cptr->info->clear_dirty(cptr); |
| } |
| |
| /* Now execute i2c core update */ |
| pvr2_i2c_core_sync(hdw); |
| |
| pvr2_hdw_subsys_bit_chg_no_lock(hdw,stale_subsys_mask,0); |
| pvr2_hdw_subsys_bit_chg_no_lock(hdw,~0,saved_subsys_mask); |
| |
| return 0; |
| } |
| |
| |
| int pvr2_hdw_commit_ctl(struct pvr2_hdw *hdw) |
| { |
| LOCK_TAKE(hdw->big_lock); do { |
| pvr2_hdw_commit_ctl_internal(hdw); |
| } while (0); LOCK_GIVE(hdw->big_lock); |
| return 0; |
| } |
| |
| |
| void pvr2_hdw_poll(struct pvr2_hdw *hdw) |
| { |
| LOCK_TAKE(hdw->big_lock); do { |
| pvr2_i2c_core_sync(hdw); |
| } while (0); LOCK_GIVE(hdw->big_lock); |
| } |
| |
| |
| void pvr2_hdw_setup_poll_trigger(struct pvr2_hdw *hdw, |
| void (*func)(void *), |
| void *data) |
| { |
| LOCK_TAKE(hdw->big_lock); do { |
| hdw->poll_trigger_func = func; |
| hdw->poll_trigger_data = data; |
| } while (0); LOCK_GIVE(hdw->big_lock); |
| } |
| |
| |
| void pvr2_hdw_poll_trigger_unlocked(struct pvr2_hdw *hdw) |
| { |
| if (hdw->poll_trigger_func) { |
| hdw->poll_trigger_func(hdw->poll_trigger_data); |
| } |
| } |
| |
| /* Return name for this driver instance */ |
| const char *pvr2_hdw_get_driver_name(struct pvr2_hdw *hdw) |
| { |
| return hdw->name; |
| } |
| |
| |
| /* Return bit mask indicating signal status */ |
| static unsigned int pvr2_hdw_get_signal_status_internal(struct pvr2_hdw *hdw) |
| { |
| unsigned int msk = 0; |
| switch (hdw->input_val) { |
| case PVR2_CVAL_INPUT_TV: |
| case PVR2_CVAL_INPUT_RADIO: |
| if (hdw->decoder_ctrl && |
| hdw->decoder_ctrl->tuned(hdw->decoder_ctrl->ctxt)) { |
| msk |= PVR2_SIGNAL_OK; |
| if (hdw->audio_stat && |
| hdw->audio_stat->status(hdw->audio_stat->ctxt)) { |
| if (hdw->flag_stereo) { |
| msk |= PVR2_SIGNAL_STEREO; |
| } |
| if (hdw->flag_bilingual) { |
| msk |= PVR2_SIGNAL_SAP; |
| } |
| } |
| } |
| break; |
| default: |
| msk |= PVR2_SIGNAL_OK | PVR2_SIGNAL_STEREO; |
| } |
| return msk; |
| } |
| |
| |
| int pvr2_hdw_is_hsm(struct pvr2_hdw *hdw) |
| { |
| int result; |
| LOCK_TAKE(hdw->ctl_lock); do { |
| hdw->cmd_buffer[0] = 0x0b; |
| result = pvr2_send_request(hdw, |
| hdw->cmd_buffer,1, |
| hdw->cmd_buffer,1); |
| if (result < 0) break; |
| result = (hdw->cmd_buffer[0] != 0); |
| } while(0); LOCK_GIVE(hdw->ctl_lock); |
| return result; |
| } |
| |
| |
| /* Return bit mask indicating signal status */ |
| unsigned int pvr2_hdw_get_signal_status(struct pvr2_hdw *hdw) |
| { |
| unsigned int msk = 0; |
| LOCK_TAKE(hdw->big_lock); do { |
| msk = pvr2_hdw_get_signal_status_internal(hdw); |
| } while (0); LOCK_GIVE(hdw->big_lock); |
| return msk; |
| } |
| |
| |
| /* Get handle to video output stream */ |
| struct pvr2_stream *pvr2_hdw_get_video_stream(struct pvr2_hdw *hp) |
| { |
| return hp->vid_stream; |
| } |
| |
| |
| void pvr2_hdw_trigger_module_log(struct pvr2_hdw *hdw) |
| { |
| int nr = pvr2_hdw_get_unit_number(hdw); |
| LOCK_TAKE(hdw->big_lock); do { |
| hdw->log_requested = !0; |
| printk(KERN_INFO "pvrusb2: ================= START STATUS CARD #%d =================\n", nr); |
| pvr2_i2c_core_check_stale(hdw); |
| hdw->log_requested = 0; |
| pvr2_i2c_core_sync(hdw); |
| pvr2_trace(PVR2_TRACE_INFO,"cx2341x config:"); |
| cx2341x_log_status(&hdw->enc_ctl_state, "pvrusb2"); |
| printk(KERN_INFO "pvrusb2: ================== END STATUS CARD #%d ==================\n", nr); |
| } while (0); LOCK_GIVE(hdw->big_lock); |
| } |
| |
| void pvr2_hdw_cpufw_set_enabled(struct pvr2_hdw *hdw, int enable_flag) |
| { |
| int ret; |
| u16 address; |
| unsigned int pipe; |
| LOCK_TAKE(hdw->big_lock); do { |
| if ((hdw->fw_buffer == 0) == !enable_flag) break; |
| |
| if (!enable_flag) { |
| pvr2_trace(PVR2_TRACE_FIRMWARE, |
| "Cleaning up after CPU firmware fetch"); |
| kfree(hdw->fw_buffer); |
| hdw->fw_buffer = NULL; |
| hdw->fw_size = 0; |
| /* Now release the CPU. It will disconnect and |
| reconnect later. */ |
| pvr2_hdw_cpureset_assert(hdw,0); |
| break; |
| } |
| |
| pvr2_trace(PVR2_TRACE_FIRMWARE, |
| "Preparing to suck out CPU firmware"); |
| hdw->fw_size = 0x2000; |
| hdw->fw_buffer = kmalloc(hdw->fw_size,GFP_KERNEL); |
| if (!hdw->fw_buffer) { |
| hdw->fw_size = 0; |
| break; |
| } |
| |
| memset(hdw->fw_buffer,0,hdw->fw_size); |
| |
| /* We have to hold the CPU during firmware upload. */ |
| pvr2_hdw_cpureset_assert(hdw,1); |
| |
| /* download the firmware from address 0000-1fff in 2048 |
| (=0x800) bytes chunk. */ |
| |
| pvr2_trace(PVR2_TRACE_FIRMWARE,"Grabbing CPU firmware"); |
| pipe = usb_rcvctrlpipe(hdw->usb_dev, 0); |
| for(address = 0; address < hdw->fw_size; address += 0x800) { |
| ret = usb_control_msg(hdw->usb_dev,pipe,0xa0,0xc0, |
| address,0, |
| hdw->fw_buffer+address,0x800,HZ); |
| if (ret < 0) break; |
| } |
| |
| pvr2_trace(PVR2_TRACE_FIRMWARE,"Done grabbing CPU firmware"); |
| |
| } while (0); LOCK_GIVE(hdw->big_lock); |
| } |
| |
| |
| /* Return true if we're in a mode for retrieval CPU firmware */ |
| int pvr2_hdw_cpufw_get_enabled(struct pvr2_hdw *hdw) |
| { |
| return hdw->fw_buffer != 0; |
| } |
| |
| |
| int pvr2_hdw_cpufw_get(struct pvr2_hdw *hdw,unsigned int offs, |
| char *buf,unsigned int cnt) |
| { |
| int ret = -EINVAL; |
| LOCK_TAKE(hdw->big_lock); do { |
| if (!buf) break; |
| if (!cnt) break; |
| |
| if (!hdw->fw_buffer) { |
| ret = -EIO; |
| break; |
| } |
| |
| if (offs >= hdw->fw_size) { |
| pvr2_trace(PVR2_TRACE_FIRMWARE, |
| "Read firmware data offs=%d EOF", |
| offs); |
| ret = 0; |
| break; |
| } |
| |
| if (offs + cnt > hdw->fw_size) cnt = hdw->fw_size - offs; |
| |
| memcpy(buf,hdw->fw_buffer+offs,cnt); |
| |
| pvr2_trace(PVR2_TRACE_FIRMWARE, |
| "Read firmware data offs=%d cnt=%d", |
| offs,cnt); |
| ret = cnt; |
| } while (0); LOCK_GIVE(hdw->big_lock); |
| |
| return ret; |
| } |
| |
| |
| int pvr2_hdw_v4l_get_minor_number(struct pvr2_hdw *hdw, |
| enum pvr2_config index) |
| { |
| switch (index) { |
| case pvr2_config_mpeg: return hdw->v4l_minor_number_mpeg; |
| case pvr2_config_radio: return hdw->v4l_minor_number_radio; |
| default: return -1; |
| } |
| } |
| |
| |
| /* Store a v4l minor device number */ |
| void pvr2_hdw_v4l_store_minor_number(struct pvr2_hdw *hdw, |
| enum pvr2_config index,int v) |
| { |
| switch (index) { |
| case pvr2_config_mpeg: hdw->v4l_minor_number_mpeg = v; |
| case pvr2_config_radio: hdw->v4l_minor_number_radio = v; |
| default: break; |
| } |
| } |
| |
| |
| static void pvr2_ctl_write_complete(struct urb *urb) |
| { |
| struct pvr2_hdw *hdw = urb->context; |
| hdw->ctl_write_pend_flag = 0; |
| if (hdw->ctl_read_pend_flag) return; |
| complete(&hdw->ctl_done); |
| } |
| |
| |
| static void pvr2_ctl_read_complete(struct urb *urb) |
| { |
| struct pvr2_hdw *hdw = urb->context; |
| hdw->ctl_read_pend_flag = 0; |
| if (hdw->ctl_write_pend_flag) return; |
| complete(&hdw->ctl_done); |
| } |
| |
| |
| static void pvr2_ctl_timeout(unsigned long data) |
| { |
| struct pvr2_hdw *hdw = (struct pvr2_hdw *)data; |
| if (hdw->ctl_write_pend_flag || hdw->ctl_read_pend_flag) { |
| hdw->ctl_timeout_flag = !0; |
| if (hdw->ctl_write_pend_flag) |
| usb_unlink_urb(hdw->ctl_write_urb); |
| if (hdw->ctl_read_pend_flag) |
| usb_unlink_urb(hdw->ctl_read_urb); |
| } |
| } |
| |
| |
| /* Issue a command and get a response from the device. This extended |
| version includes a probe flag (which if set means that device errors |
| should not be logged or treated as fatal) and a timeout in jiffies. |
| This can be used to non-lethally probe the health of endpoint 1. */ |
| static int pvr2_send_request_ex(struct pvr2_hdw *hdw, |
| unsigned int timeout,int probe_fl, |
| void *write_data,unsigned int write_len, |
| void *read_data,unsigned int read_len) |
| { |
| unsigned int idx; |
| int status = 0; |
| struct timer_list timer; |
| if (!hdw->ctl_lock_held) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "Attempted to execute control transfer" |
| " without lock!!"); |
| return -EDEADLK; |
| } |
| if ((!hdw->flag_ok) && !probe_fl) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "Attempted to execute control transfer" |
| " when device not ok"); |
| return -EIO; |
| } |
| if (!(hdw->ctl_read_urb && hdw->ctl_write_urb)) { |
| if (!probe_fl) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "Attempted to execute control transfer" |
| " when USB is disconnected"); |
| } |
| return -ENOTTY; |
| } |
| |
| /* Ensure that we have sane parameters */ |
| if (!write_data) write_len = 0; |
| if (!read_data) read_len = 0; |
| if (write_len > PVR2_CTL_BUFFSIZE) { |
| pvr2_trace( |
| PVR2_TRACE_ERROR_LEGS, |
| "Attempted to execute %d byte" |
| " control-write transfer (limit=%d)", |
| write_len,PVR2_CTL_BUFFSIZE); |
| return -EINVAL; |
| } |
| if (read_len > PVR2_CTL_BUFFSIZE) { |
| pvr2_trace( |
| PVR2_TRACE_ERROR_LEGS, |
| "Attempted to execute %d byte" |
| " control-read transfer (limit=%d)", |
| write_len,PVR2_CTL_BUFFSIZE); |
| return -EINVAL; |
| } |
| if ((!write_len) && (!read_len)) { |
| pvr2_trace( |
| PVR2_TRACE_ERROR_LEGS, |
| "Attempted to execute null control transfer?"); |
| return -EINVAL; |
| } |
| |
| |
| hdw->cmd_debug_state = 1; |
| if (write_len) { |
| hdw->cmd_debug_code = ((unsigned char *)write_data)[0]; |
| } else { |
| hdw->cmd_debug_code = 0; |
| } |
| hdw->cmd_debug_write_len = write_len; |
| hdw->cmd_debug_read_len = read_len; |
| |
| /* Initialize common stuff */ |
| init_completion(&hdw->ctl_done); |
| hdw->ctl_timeout_flag = 0; |
| hdw->ctl_write_pend_flag = 0; |
| hdw->ctl_read_pend_flag = 0; |
| init_timer(&timer); |
| timer.expires = jiffies + timeout; |
| timer.data = (unsigned long)hdw; |
| timer.function = pvr2_ctl_timeout; |
| |
| if (write_len) { |
| hdw->cmd_debug_state = 2; |
| /* Transfer write data to internal buffer */ |
| for (idx = 0; idx < write_len; idx++) { |
| hdw->ctl_write_buffer[idx] = |
| ((unsigned char *)write_data)[idx]; |
| } |
| /* Initiate a write request */ |
| usb_fill_bulk_urb(hdw->ctl_write_urb, |
| hdw->usb_dev, |
| usb_sndbulkpipe(hdw->usb_dev, |
| PVR2_CTL_WRITE_ENDPOINT), |
| hdw->ctl_write_buffer, |
| write_len, |
| pvr2_ctl_write_complete, |
| hdw); |
| hdw->ctl_write_urb->actual_length = 0; |
| hdw->ctl_write_pend_flag = !0; |
| status = usb_submit_urb(hdw->ctl_write_urb,GFP_KERNEL); |
| if (status < 0) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "Failed to submit write-control" |
| " URB status=%d",status); |
| hdw->ctl_write_pend_flag = 0; |
| goto done; |
| } |
| } |
| |
| if (read_len) { |
| hdw->cmd_debug_state = 3; |
| memset(hdw->ctl_read_buffer,0x43,read_len); |
| /* Initiate a read request */ |
| usb_fill_bulk_urb(hdw->ctl_read_urb, |
| hdw->usb_dev, |
| usb_rcvbulkpipe(hdw->usb_dev, |
| PVR2_CTL_READ_ENDPOINT), |
| hdw->ctl_read_buffer, |
| read_len, |
| pvr2_ctl_read_complete, |
| hdw); |
| hdw->ctl_read_urb->actual_length = 0; |
| hdw->ctl_read_pend_flag = !0; |
| status = usb_submit_urb(hdw->ctl_read_urb,GFP_KERNEL); |
| if (status < 0) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "Failed to submit read-control" |
| " URB status=%d",status); |
| hdw->ctl_read_pend_flag = 0; |
| goto done; |
| } |
| } |
| |
| /* Start timer */ |
| add_timer(&timer); |
| |
| /* Now wait for all I/O to complete */ |
| hdw->cmd_debug_state = 4; |
| while (hdw->ctl_write_pend_flag || hdw->ctl_read_pend_flag) { |
| wait_for_completion(&hdw->ctl_done); |
| } |
| hdw->cmd_debug_state = 5; |
| |
| /* Stop timer */ |
| del_timer_sync(&timer); |
| |
| hdw->cmd_debug_state = 6; |
| status = 0; |
| |
| if (hdw->ctl_timeout_flag) { |
| status = -ETIMEDOUT; |
| if (!probe_fl) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "Timed out control-write"); |
| } |
| goto done; |
| } |
| |
| if (write_len) { |
| /* Validate results of write request */ |
| if ((hdw->ctl_write_urb->status != 0) && |
| (hdw->ctl_write_urb->status != -ENOENT) && |
| (hdw->ctl_write_urb->status != -ESHUTDOWN) && |
| (hdw->ctl_write_urb->status != -ECONNRESET)) { |
| /* USB subsystem is reporting some kind of failure |
| on the write */ |
| status = hdw->ctl_write_urb->status; |
| if (!probe_fl) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "control-write URB failure," |
| " status=%d", |
| status); |
| } |
| goto done; |
| } |
| if (hdw->ctl_write_urb->actual_length < write_len) { |
| /* Failed to write enough data */ |
| status = -EIO; |
| if (!probe_fl) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "control-write URB short," |
| " expected=%d got=%d", |
| write_len, |
| hdw->ctl_write_urb->actual_length); |
| } |
| goto done; |
| } |
| } |
| if (read_len) { |
| /* Validate results of read request */ |
| if ((hdw->ctl_read_urb->status != 0) && |
| (hdw->ctl_read_urb->status != -ENOENT) && |
| (hdw->ctl_read_urb->status != -ESHUTDOWN) && |
| (hdw->ctl_read_urb->status != -ECONNRESET)) { |
| /* USB subsystem is reporting some kind of failure |
| on the read */ |
| status = hdw->ctl_read_urb->status; |
| if (!probe_fl) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "control-read URB failure," |
| " status=%d", |
| status); |
| } |
| goto done; |
| } |
| if (hdw->ctl_read_urb->actual_length < read_len) { |
| /* Failed to read enough data */ |
| status = -EIO; |
| if (!probe_fl) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "control-read URB short," |
| " expected=%d got=%d", |
| read_len, |
| hdw->ctl_read_urb->actual_length); |
| } |
| goto done; |
| } |
| /* Transfer retrieved data out from internal buffer */ |
| for (idx = 0; idx < read_len; idx++) { |
| ((unsigned char *)read_data)[idx] = |
| hdw->ctl_read_buffer[idx]; |
| } |
| } |
| |
| done: |
| |
| hdw->cmd_debug_state = 0; |
| if ((status < 0) && (!probe_fl)) { |
| pvr2_hdw_render_useless_unlocked(hdw); |
| } |
| return status; |
| } |
| |
| |
| int pvr2_send_request(struct pvr2_hdw *hdw, |
| void *write_data,unsigned int write_len, |
| void *read_data,unsigned int read_len) |
| { |
| return pvr2_send_request_ex(hdw,HZ*4,0, |
| write_data,write_len, |
| read_data,read_len); |
| } |
| |
| int pvr2_write_register(struct pvr2_hdw *hdw, u16 reg, u32 data) |
| { |
| int ret; |
| |
| LOCK_TAKE(hdw->ctl_lock); |
| |
| hdw->cmd_buffer[0] = 0x04; /* write register prefix */ |
| PVR2_DECOMPOSE_LE(hdw->cmd_buffer,1,data); |
| hdw->cmd_buffer[5] = 0; |
| hdw->cmd_buffer[6] = (reg >> 8) & 0xff; |
| hdw->cmd_buffer[7] = reg & 0xff; |
| |
| |
| ret = pvr2_send_request(hdw, hdw->cmd_buffer, 8, hdw->cmd_buffer, 0); |
| |
| LOCK_GIVE(hdw->ctl_lock); |
| |
| return ret; |
| } |
| |
| |
| static int pvr2_read_register(struct pvr2_hdw *hdw, u16 reg, u32 *data) |
| { |
| int ret = 0; |
| |
| LOCK_TAKE(hdw->ctl_lock); |
| |
| hdw->cmd_buffer[0] = 0x05; /* read register prefix */ |
| hdw->cmd_buffer[1] = 0; |
| hdw->cmd_buffer[2] = 0; |
| hdw->cmd_buffer[3] = 0; |
| hdw->cmd_buffer[4] = 0; |
| hdw->cmd_buffer[5] = 0; |
| hdw->cmd_buffer[6] = (reg >> 8) & 0xff; |
| hdw->cmd_buffer[7] = reg & 0xff; |
| |
| ret |= pvr2_send_request(hdw, hdw->cmd_buffer, 8, hdw->cmd_buffer, 4); |
| *data = PVR2_COMPOSE_LE(hdw->cmd_buffer,0); |
| |
| LOCK_GIVE(hdw->ctl_lock); |
| |
| return ret; |
| } |
| |
| |
| static int pvr2_write_u16(struct pvr2_hdw *hdw, u16 data, int res) |
| { |
| int ret; |
| |
| LOCK_TAKE(hdw->ctl_lock); |
| |
| hdw->cmd_buffer[0] = (data >> 8) & 0xff; |
| hdw->cmd_buffer[1] = data & 0xff; |
| |
| ret = pvr2_send_request(hdw, hdw->cmd_buffer, 2, hdw->cmd_buffer, res); |
| |
| LOCK_GIVE(hdw->ctl_lock); |
| |
| return ret; |
| } |
| |
| |
| static int pvr2_write_u8(struct pvr2_hdw *hdw, u8 data, int res) |
| { |
| int ret; |
| |
| LOCK_TAKE(hdw->ctl_lock); |
| |
| hdw->cmd_buffer[0] = data; |
| |
| ret = pvr2_send_request(hdw, hdw->cmd_buffer, 1, hdw->cmd_buffer, res); |
| |
| LOCK_GIVE(hdw->ctl_lock); |
| |
| return ret; |
| } |
| |
| |
| static void pvr2_hdw_render_useless_unlocked(struct pvr2_hdw *hdw) |
| { |
| if (!hdw->flag_ok) return; |
| pvr2_trace(PVR2_TRACE_INIT,"render_useless"); |
| hdw->flag_ok = 0; |
| if (hdw->vid_stream) { |
| pvr2_stream_setup(hdw->vid_stream,NULL,0,0); |
| } |
| hdw->flag_streaming_enabled = 0; |
| hdw->subsys_enabled_mask = 0; |
| } |
| |
| |
| void pvr2_hdw_render_useless(struct pvr2_hdw *hdw) |
| { |
| LOCK_TAKE(hdw->ctl_lock); |
| pvr2_hdw_render_useless_unlocked(hdw); |
| LOCK_GIVE(hdw->ctl_lock); |
| } |
| |
| |
| void pvr2_hdw_device_reset(struct pvr2_hdw *hdw) |
| { |
| int ret; |
| pvr2_trace(PVR2_TRACE_INIT,"Performing a device reset..."); |
| ret = usb_lock_device_for_reset(hdw->usb_dev,NULL); |
| if (ret == 1) { |
| ret = usb_reset_device(hdw->usb_dev); |
| usb_unlock_device(hdw->usb_dev); |
| } else { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "Failed to lock USB device ret=%d",ret); |
| } |
| if (init_pause_msec) { |
| pvr2_trace(PVR2_TRACE_INFO, |
| "Waiting %u msec for hardware to settle", |
| init_pause_msec); |
| msleep(init_pause_msec); |
| } |
| |
| } |
| |
| |
| void pvr2_hdw_cpureset_assert(struct pvr2_hdw *hdw,int val) |
| { |
| char da[1]; |
| unsigned int pipe; |
| int ret; |
| |
| if (!hdw->usb_dev) return; |
| |
| pvr2_trace(PVR2_TRACE_INIT,"cpureset_assert(%d)",val); |
| |
| da[0] = val ? 0x01 : 0x00; |
| |
| /* Write the CPUCS register on the 8051. The lsb of the register |
| is the reset bit; a 1 asserts reset while a 0 clears it. */ |
| pipe = usb_sndctrlpipe(hdw->usb_dev, 0); |
| ret = usb_control_msg(hdw->usb_dev,pipe,0xa0,0x40,0xe600,0,da,1,HZ); |
| if (ret < 0) { |
| pvr2_trace(PVR2_TRACE_ERROR_LEGS, |
| "cpureset_assert(%d) error=%d",val,ret); |
| pvr2_hdw_render_useless(hdw); |
| } |
| } |
| |
| |
| int pvr2_hdw_cmd_deep_reset(struct pvr2_hdw *hdw) |
| { |
| int status; |
| LOCK_TAKE(hdw->ctl_lock); do { |
| pvr2_trace(PVR2_TRACE_INIT,"Requesting uproc hard reset"); |
| hdw->flag_ok = !0; |
| hdw->cmd_buffer[0] = 0xdd; |
| status = pvr2_send_request(hdw,hdw->cmd_buffer,1,NULL,0); |
| } while (0); LOCK_GIVE(hdw->ctl_lock); |
| return status; |
| } |
| |
| |
| int pvr2_hdw_cmd_powerup(struct pvr2_hdw *hdw) |
| { |
| int status; |
| LOCK_TAKE(hdw->ctl_lock); do { |
| pvr2_trace(PVR2_TRACE_INIT,"Requesting powerup"); |
| hdw->cmd_buffer[0] = 0xde; |
| status = pvr2_send_request(hdw,hdw->cmd_buffer,1,NULL,0); |
| } while (0); LOCK_GIVE(hdw->ctl_lock); |
| return status; |
| } |
| |
| |
| int pvr2_hdw_cmd_decoder_reset(struct pvr2_hdw *hdw) |
| { |
| if (!hdw->decoder_ctrl) { |
| pvr2_trace(PVR2_TRACE_INIT, |
| "Unable to reset decoder: nothing attached"); |
| return -ENOTTY; |
| } |
| |
| if (!hdw->decoder_ctrl->force_reset) { |
| pvr2_trace(PVR2_TRACE_INIT, |
| "Unable to reset decoder: not implemented"); |
| return -ENOTTY; |
| } |
| |
| pvr2_trace(PVR2_TRACE_INIT, |
| "Requesting decoder reset"); |
| hdw->decoder_ctrl->force_reset(hdw->decoder_ctrl->ctxt); |
| return 0; |
| } |
| |
| |
| /* Stop / start video stream transport */ |
| static int pvr2_hdw_cmd_usbstream(struct pvr2_hdw *hdw,int runFl) |
| { |
| int status; |
| LOCK_TAKE(hdw->ctl_lock); do { |
| hdw->cmd_buffer[0] = (runFl ? 0x36 : 0x37); |
| status = pvr2_send_request(hdw,hdw->cmd_buffer,1,NULL,0); |
| } while (0); LOCK_GIVE(hdw->ctl_lock); |
| if (!status) { |
| hdw->subsys_enabled_mask = |
| ((hdw->subsys_enabled_mask & |
| ~(1<<PVR2_SUBSYS_B_USBSTREAM_RUN)) | |
| (runFl ? (1<<PVR2_SUBSYS_B_USBSTREAM_RUN) : 0)); |
| } |
| return status; |
| } |
| |
| |
| void pvr2_hdw_get_debug_info(const struct pvr2_hdw *hdw, |
| struct pvr2_hdw_debug_info *ptr) |
| { |
| ptr->big_lock_held = hdw->big_lock_held; |
| ptr->ctl_lock_held = hdw->ctl_lock_held; |
| ptr->flag_ok = hdw->flag_ok; |
| ptr->flag_disconnected = hdw->flag_disconnected; |
| ptr->flag_init_ok = hdw->flag_init_ok; |
| ptr->flag_streaming_enabled = hdw->flag_streaming_enabled; |
| ptr->subsys_flags = hdw->subsys_enabled_mask; |
| ptr->cmd_debug_state = hdw->cmd_debug_state; |
| ptr->cmd_code = hdw->cmd_debug_code; |
| ptr->cmd_debug_write_len = hdw->cmd_debug_write_len; |
| ptr->cmd_debug_read_len = hdw->cmd_debug_read_len; |
| ptr->cmd_debug_timeout = hdw->ctl_timeout_flag; |
| ptr->cmd_debug_write_pend = hdw->ctl_write_pend_flag; |
| ptr->cmd_debug_read_pend = hdw->ctl_read_pend_flag; |
| ptr->cmd_debug_rstatus = hdw->ctl_read_urb->status; |
| ptr->cmd_debug_wstatus = hdw->ctl_read_urb->status; |
| } |
| |
| |
| int pvr2_hdw_gpio_get_dir(struct pvr2_hdw *hdw,u32 *dp) |
| { |
| return pvr2_read_register(hdw,PVR2_GPIO_DIR,dp); |
| } |
| |
| |
| int pvr2_hdw_gpio_get_out(struct pvr2_hdw *hdw,u32 *dp) |
| { |
| return pvr2_read_register(hdw,PVR2_GPIO_OUT,dp); |
| } |
| |
| |
| int pvr2_hdw_gpio_get_in(struct pvr2_hdw *hdw,u32 *dp) |
| { |
| return pvr2_read_register(hdw,PVR2_GPIO_IN,dp); |
| } |
| |
| |
| int pvr2_hdw_gpio_chg_dir(struct pvr2_hdw *hdw,u32 msk,u32 val) |
| { |
| u32 cval,nval; |
| int ret; |
| if (~msk) { |
| ret = pvr2_read_register(hdw,PVR2_GPIO_DIR,&cval); |
| if (ret) return ret; |
| nval = (cval & ~msk) | (val & msk); |
| pvr2_trace(PVR2_TRACE_GPIO, |
| "GPIO direction changing 0x%x:0x%x" |
| " from 0x%x to 0x%x", |
| msk,val,cval,nval); |
| } else { |
| nval = val; |
| pvr2_trace(PVR2_TRACE_GPIO, |
| "GPIO direction changing to 0x%x",nval); |
| } |
| return pvr2_write_register(hdw,PVR2_GPIO_DIR,nval); |
| } |
| |
| |
| int pvr2_hdw_gpio_chg_out(struct pvr2_hdw *hdw,u32 msk,u32 val) |
| { |
| u32 cval,nval; |
| int ret; |
| if (~msk) { |
| ret = pvr2_read_register(hdw,PVR2_GPIO_OUT,&cval); |
| if (ret) return ret; |
| nval = (cval & ~msk) | (val & msk); |
| pvr2_trace(PVR2_TRACE_GPIO, |
| "GPIO output changing 0x%x:0x%x from 0x%x to 0x%x", |
| msk,val,cval,nval); |
| } else { |
| nval = val; |
| pvr2_trace(PVR2_TRACE_GPIO, |
| "GPIO output changing to 0x%x",nval); |
| } |
| return pvr2_write_register(hdw,PVR2_GPIO_OUT,nval); |
| } |
| |
| |
| /* Find I2C address of eeprom */ |
| static int pvr2_hdw_get_eeprom_addr(struct pvr2_hdw *hdw) |
| { |
| int result; |
| LOCK_TAKE(hdw->ctl_lock); do { |
| hdw->cmd_buffer[0] = 0xeb; |
| result = pvr2_send_request(hdw, |
| hdw->cmd_buffer,1, |
| hdw->cmd_buffer,1); |
| if (result < 0) break; |
| result = hdw->cmd_buffer[0]; |
| } while(0); LOCK_GIVE(hdw->ctl_lock); |
| return result; |
| } |
| |
| |
| int pvr2_hdw_register_access(struct pvr2_hdw *hdw, |
| u32 chip_id,unsigned long reg_id, |
| int setFl,u32 *val_ptr) |
| { |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| struct list_head *item; |
| struct pvr2_i2c_client *cp; |
| struct v4l2_register req; |
| int stat = 0; |
| int okFl = 0; |
| |
| req.i2c_id = chip_id; |
| req.reg = reg_id; |
| if (setFl) req.val = *val_ptr; |
| mutex_lock(&hdw->i2c_list_lock); do { |
| list_for_each(item,&hdw->i2c_clients) { |
| cp = list_entry(item,struct pvr2_i2c_client,list); |
| if (cp->client->driver->id != chip_id) continue; |
| stat = pvr2_i2c_client_cmd( |
| cp,(setFl ? VIDIOC_INT_S_REGISTER : |
| VIDIOC_INT_G_REGISTER),&req); |
| if (!setFl) *val_ptr = req.val; |
| okFl = !0; |
| break; |
| } |
| } while (0); mutex_unlock(&hdw->i2c_list_lock); |
| if (okFl) { |
| return stat; |
| } |
| return -EINVAL; |
| #else |
| return -ENOSYS; |
| #endif |
| } |
| |
| |
| /* |
| Stuff for Emacs to see, in order to encourage consistent editing style: |
| *** Local Variables: *** |
| *** mode: c *** |
| *** fill-column: 75 *** |
| *** tab-width: 8 *** |
| *** c-basic-offset: 8 *** |
| *** End: *** |
| */ |