| /* linux/arch/arm/plat-s5p/s5p-time.c |
| * |
| * Copyright (c) 2011 Samsung Electronics Co., Ltd. |
| * http://www.samsung.com/ |
| * |
| * S5P - Common hr-timer support |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/err.h> |
| #include <linux/clk.h> |
| #include <linux/clockchips.h> |
| #include <linux/platform_device.h> |
| |
| #include <asm/smp_twd.h> |
| #include <asm/mach/time.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/map.h> |
| #include <asm/sched_clock.h> |
| |
| #include <mach/map.h> |
| #include <plat/devs.h> |
| #include <plat/regs-timer.h> |
| #include <plat/s5p-time.h> |
| |
| static struct clk *tin_event; |
| static struct clk *tin_source; |
| static struct clk *tdiv_event; |
| static struct clk *tdiv_source; |
| static struct clk *timerclk; |
| static struct s5p_timer_source timer_source; |
| static unsigned long clock_count_per_tick; |
| static void s5p_timer_resume(void); |
| |
| static void s5p_time_stop(enum s5p_timer_mode mode) |
| { |
| unsigned long tcon; |
| |
| tcon = __raw_readl(S3C2410_TCON); |
| |
| switch (mode) { |
| case S5P_PWM0: |
| tcon &= ~S3C2410_TCON_T0START; |
| break; |
| |
| case S5P_PWM1: |
| tcon &= ~S3C2410_TCON_T1START; |
| break; |
| |
| case S5P_PWM2: |
| tcon &= ~S3C2410_TCON_T2START; |
| break; |
| |
| case S5P_PWM3: |
| tcon &= ~S3C2410_TCON_T3START; |
| break; |
| |
| case S5P_PWM4: |
| tcon &= ~S3C2410_TCON_T4START; |
| break; |
| |
| default: |
| printk(KERN_ERR "Invalid Timer %d\n", mode); |
| break; |
| } |
| __raw_writel(tcon, S3C2410_TCON); |
| } |
| |
| static void s5p_time_setup(enum s5p_timer_mode mode, unsigned long tcnt) |
| { |
| unsigned long tcon; |
| |
| tcon = __raw_readl(S3C2410_TCON); |
| |
| tcnt--; |
| |
| switch (mode) { |
| case S5P_PWM0: |
| tcon &= ~(0x0f << 0); |
| tcon |= S3C2410_TCON_T0MANUALUPD; |
| break; |
| |
| case S5P_PWM1: |
| tcon &= ~(0x0f << 8); |
| tcon |= S3C2410_TCON_T1MANUALUPD; |
| break; |
| |
| case S5P_PWM2: |
| tcon &= ~(0x0f << 12); |
| tcon |= S3C2410_TCON_T2MANUALUPD; |
| break; |
| |
| case S5P_PWM3: |
| tcon &= ~(0x0f << 16); |
| tcon |= S3C2410_TCON_T3MANUALUPD; |
| break; |
| |
| case S5P_PWM4: |
| tcon &= ~(0x07 << 20); |
| tcon |= S3C2410_TCON_T4MANUALUPD; |
| break; |
| |
| default: |
| printk(KERN_ERR "Invalid Timer %d\n", mode); |
| break; |
| } |
| |
| __raw_writel(tcnt, S3C2410_TCNTB(mode)); |
| __raw_writel(tcnt, S3C2410_TCMPB(mode)); |
| __raw_writel(tcon, S3C2410_TCON); |
| } |
| |
| static void s5p_time_start(enum s5p_timer_mode mode, bool periodic) |
| { |
| unsigned long tcon; |
| |
| tcon = __raw_readl(S3C2410_TCON); |
| |
| switch (mode) { |
| case S5P_PWM0: |
| tcon |= S3C2410_TCON_T0START; |
| tcon &= ~S3C2410_TCON_T0MANUALUPD; |
| |
| if (periodic) |
| tcon |= S3C2410_TCON_T0RELOAD; |
| else |
| tcon &= ~S3C2410_TCON_T0RELOAD; |
| break; |
| |
| case S5P_PWM1: |
| tcon |= S3C2410_TCON_T1START; |
| tcon &= ~S3C2410_TCON_T1MANUALUPD; |
| |
| if (periodic) |
| tcon |= S3C2410_TCON_T1RELOAD; |
| else |
| tcon &= ~S3C2410_TCON_T1RELOAD; |
| break; |
| |
| case S5P_PWM2: |
| tcon |= S3C2410_TCON_T2START; |
| tcon &= ~S3C2410_TCON_T2MANUALUPD; |
| |
| if (periodic) |
| tcon |= S3C2410_TCON_T2RELOAD; |
| else |
| tcon &= ~S3C2410_TCON_T2RELOAD; |
| break; |
| |
| case S5P_PWM3: |
| tcon |= S3C2410_TCON_T3START; |
| tcon &= ~S3C2410_TCON_T3MANUALUPD; |
| |
| if (periodic) |
| tcon |= S3C2410_TCON_T3RELOAD; |
| else |
| tcon &= ~S3C2410_TCON_T3RELOAD; |
| break; |
| |
| case S5P_PWM4: |
| tcon |= S3C2410_TCON_T4START; |
| tcon &= ~S3C2410_TCON_T4MANUALUPD; |
| |
| if (periodic) |
| tcon |= S3C2410_TCON_T4RELOAD; |
| else |
| tcon &= ~S3C2410_TCON_T4RELOAD; |
| break; |
| |
| default: |
| printk(KERN_ERR "Invalid Timer %d\n", mode); |
| break; |
| } |
| __raw_writel(tcon, S3C2410_TCON); |
| } |
| |
| static int s5p_set_next_event(unsigned long cycles, |
| struct clock_event_device *evt) |
| { |
| s5p_time_setup(timer_source.event_id, cycles); |
| s5p_time_start(timer_source.event_id, NON_PERIODIC); |
| |
| return 0; |
| } |
| |
| static void s5p_set_mode(enum clock_event_mode mode, |
| struct clock_event_device *evt) |
| { |
| s5p_time_stop(timer_source.event_id); |
| |
| switch (mode) { |
| case CLOCK_EVT_MODE_PERIODIC: |
| s5p_time_setup(timer_source.event_id, clock_count_per_tick); |
| s5p_time_start(timer_source.event_id, PERIODIC); |
| break; |
| |
| case CLOCK_EVT_MODE_ONESHOT: |
| break; |
| |
| case CLOCK_EVT_MODE_UNUSED: |
| case CLOCK_EVT_MODE_SHUTDOWN: |
| break; |
| |
| case CLOCK_EVT_MODE_RESUME: |
| s5p_timer_resume(); |
| break; |
| } |
| } |
| |
| static void s5p_timer_resume(void) |
| { |
| /* event timer restart */ |
| s5p_time_setup(timer_source.event_id, clock_count_per_tick); |
| s5p_time_start(timer_source.event_id, PERIODIC); |
| |
| /* source timer restart */ |
| s5p_time_setup(timer_source.source_id, TCNT_MAX); |
| s5p_time_start(timer_source.source_id, PERIODIC); |
| } |
| |
| void __init s5p_set_timer_source(enum s5p_timer_mode event, |
| enum s5p_timer_mode source) |
| { |
| s3c_device_timer[event].dev.bus = &platform_bus_type; |
| s3c_device_timer[source].dev.bus = &platform_bus_type; |
| |
| timer_source.event_id = event; |
| timer_source.source_id = source; |
| } |
| |
| static struct clock_event_device time_event_device = { |
| .name = "s5p_event_timer", |
| .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, |
| .rating = 200, |
| .set_next_event = s5p_set_next_event, |
| .set_mode = s5p_set_mode, |
| }; |
| |
| static irqreturn_t s5p_clock_event_isr(int irq, void *dev_id) |
| { |
| struct clock_event_device *evt = dev_id; |
| |
| evt->event_handler(evt); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static struct irqaction s5p_clock_event_irq = { |
| .name = "s5p_time_irq", |
| .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, |
| .handler = s5p_clock_event_isr, |
| .dev_id = &time_event_device, |
| }; |
| |
| static void __init s5p_clockevent_init(void) |
| { |
| unsigned long pclk; |
| unsigned long clock_rate; |
| unsigned int irq_number; |
| struct clk *tscaler; |
| |
| pclk = clk_get_rate(timerclk); |
| |
| tscaler = clk_get_parent(tdiv_event); |
| |
| clk_set_rate(tscaler, pclk / 2); |
| clk_set_rate(tdiv_event, pclk / 2); |
| clk_set_parent(tin_event, tdiv_event); |
| |
| clock_rate = clk_get_rate(tin_event); |
| clock_count_per_tick = clock_rate / HZ; |
| |
| clockevents_calc_mult_shift(&time_event_device, |
| clock_rate, S5PTIMER_MIN_RANGE); |
| time_event_device.max_delta_ns = |
| clockevent_delta2ns(-1, &time_event_device); |
| time_event_device.min_delta_ns = |
| clockevent_delta2ns(1, &time_event_device); |
| |
| time_event_device.cpumask = cpumask_of(0); |
| clockevents_register_device(&time_event_device); |
| |
| irq_number = timer_source.event_id + IRQ_TIMER0; |
| setup_irq(irq_number, &s5p_clock_event_irq); |
| } |
| |
| static void __iomem *s5p_timer_reg(void) |
| { |
| unsigned long offset = 0; |
| |
| switch (timer_source.source_id) { |
| case S5P_PWM0: |
| case S5P_PWM1: |
| case S5P_PWM2: |
| case S5P_PWM3: |
| offset = (timer_source.source_id * 0x0c) + 0x14; |
| break; |
| |
| case S5P_PWM4: |
| offset = 0x40; |
| break; |
| |
| default: |
| printk(KERN_ERR "Invalid Timer %d\n", timer_source.source_id); |
| return NULL; |
| } |
| |
| return S3C_TIMERREG(offset); |
| } |
| |
| /* |
| * Override the global weak sched_clock symbol with this |
| * local implementation which uses the clocksource to get some |
| * better resolution when scheduling the kernel. We accept that |
| * this wraps around for now, since it is just a relative time |
| * stamp. (Inspired by U300 implementation.) |
| */ |
| static u32 notrace s5p_read_sched_clock(void) |
| { |
| void __iomem *reg = s5p_timer_reg(); |
| |
| if (!reg) |
| return 0; |
| |
| return ~__raw_readl(reg); |
| } |
| |
| static void __init s5p_clocksource_init(void) |
| { |
| unsigned long pclk; |
| unsigned long clock_rate; |
| |
| pclk = clk_get_rate(timerclk); |
| |
| clk_set_rate(tdiv_source, pclk / 2); |
| clk_set_parent(tin_source, tdiv_source); |
| |
| clock_rate = clk_get_rate(tin_source); |
| |
| s5p_time_setup(timer_source.source_id, TCNT_MAX); |
| s5p_time_start(timer_source.source_id, PERIODIC); |
| |
| setup_sched_clock(s5p_read_sched_clock, 32, clock_rate); |
| |
| if (clocksource_mmio_init(s5p_timer_reg(), "s5p_clocksource_timer", |
| clock_rate, 250, 32, clocksource_mmio_readl_down)) |
| panic("s5p_clocksource_timer: can't register clocksource\n"); |
| } |
| |
| static void __init s5p_timer_resources(void) |
| { |
| |
| unsigned long event_id = timer_source.event_id; |
| unsigned long source_id = timer_source.source_id; |
| char devname[15]; |
| |
| timerclk = clk_get(NULL, "timers"); |
| if (IS_ERR(timerclk)) |
| panic("failed to get timers clock for timer"); |
| |
| clk_enable(timerclk); |
| |
| sprintf(devname, "s3c24xx-pwm.%lu", event_id); |
| s3c_device_timer[event_id].id = event_id; |
| s3c_device_timer[event_id].dev.init_name = devname; |
| |
| tin_event = clk_get(&s3c_device_timer[event_id].dev, "pwm-tin"); |
| if (IS_ERR(tin_event)) |
| panic("failed to get pwm-tin clock for event timer"); |
| |
| tdiv_event = clk_get(&s3c_device_timer[event_id].dev, "pwm-tdiv"); |
| if (IS_ERR(tdiv_event)) |
| panic("failed to get pwm-tdiv clock for event timer"); |
| |
| clk_enable(tin_event); |
| |
| sprintf(devname, "s3c24xx-pwm.%lu", source_id); |
| s3c_device_timer[source_id].id = source_id; |
| s3c_device_timer[source_id].dev.init_name = devname; |
| |
| tin_source = clk_get(&s3c_device_timer[source_id].dev, "pwm-tin"); |
| if (IS_ERR(tin_source)) |
| panic("failed to get pwm-tin clock for source timer"); |
| |
| tdiv_source = clk_get(&s3c_device_timer[source_id].dev, "pwm-tdiv"); |
| if (IS_ERR(tdiv_source)) |
| panic("failed to get pwm-tdiv clock for source timer"); |
| |
| clk_enable(tin_source); |
| } |
| |
| static void __init s5p_timer_init(void) |
| { |
| s5p_timer_resources(); |
| s5p_clockevent_init(); |
| s5p_clocksource_init(); |
| } |
| |
| struct sys_timer s5p_timer = { |
| .init = s5p_timer_init, |
| }; |