arch/ppc/platforms/adir_pci.c - kernel/msm - Gitiles

 /*
  * arch/ppc/platforms/adir_pci.c
  *
  * PCI support for SBS Adirondack
  *
  * By Michael Sokolov <msokolov@ivan.Harhan.ORG>
  * based on the K2 version by Matt Porter <mporter@mvista.com>
  */

 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/slab.h>

 #include <asm/byteorder.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>
 #include <asm/machdep.h>
 #include <asm/pci-bridge.h>

 #include <syslib/cpc710.h>
 #include "adir.h"

 #undef DEBUG
 #ifdef DEBUG
 #define DBG(x...) printk(x)
 #else
 #define DBG(x...)
 #endif /* DEBUG */

 static inline int __init
 adir_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
 {
 #define	PCIIRQ(a,b,c,d)	{ADIR_IRQ_##a,ADIR_IRQ_##b,ADIR_IRQ_##c,ADIR_IRQ_##d},
 	struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
 	/*
 	 * The three PCI devices on the motherboard have dedicated lines to the
 	 * CPLD interrupt controller, bypassing the standard PCI INTA-D and the
 	 * PC interrupt controller. All other PCI devices (slots) have usual
 	 * staggered INTA-D lines, resulting in 8 lines total (PCI0 INTA-D and
 	 * PCI1 INTA-D). All 8 go to the CPLD interrupt controller. PCI0 INTA-D
 	 * also go to the south bridge, so we have the option of taking them
 	 * via the CPLD interrupt controller or via the south bridge 8259
 	 * 8258 thingy. PCI1 INTA-D can only be taken via the CPLD interrupt
 	 * controller. We take all PCI interrupts via the CPLD interrupt
 	 * controller as recommended by SBS.
 	 *
 	 * We also have some monkey business with the PCI devices within the
 	 * VT82C686B south bridge itself. This chip actually has 7 functions on
 	 * its IDSEL. Function 0 is the actual south bridge, function 1 is IDE,
 	 * and function 4 is some special stuff. The other 4 functions are just
 	 * regular PCI devices bundled in the chip. 2 and 3 are USB UHCIs and 5
 	 * and 6 are audio (not supported on the Adirondack).
 	 *
 	 * This is where the monkey business begins. PCI devices are supposed
 	 * to signal normal PCI interrupts. But the 4 functions in question are
 	 * located in the south bridge chip, which is designed with the
 	 * assumption that it will be fielding PCI INTA-D interrupts rather
 	 * than generating them. Here's what it does. Each of the functions in
 	 * question routes its interrupt to one of the IRQs on the 8259 thingy.
 	 * Which one? It looks at the Interrupt Line register in the PCI config
 	 * space, even though the PCI spec says it's for BIOS/OS interaction
 	 * only.
 	 *
 	 * How do we deal with this? We take these interrupts via 8259 IRQs as
 	 * we have to. We return the desired IRQ numbers from this routine when
 	 * called for the functions in question. The PCI scan code will then
 	 * stick our return value into the Interrupt Line register in the PCI
 	 * config space, and the interrupt will actually go there. We identify
 	 * these functions within the south bridge IDSEL by their interrupt pin
 	 * numbers, as the VT82C686B has 04 in the Interrupt Pin register for
 	 * USB and 03 for audio.
 	 */
 	if (!hose->index) {
 		static char pci_irq_table[][4] =
 		/*
 		 *             PCI IDSEL/INTPIN->INTLINE
 		 *             A          B          C          D
 		 */
 		{
     /* south bridge */	PCIIRQ(IDE0,      NONE,      VIA_AUDIO, VIA_USB)
     /* Ethernet 0 */	PCIIRQ(MBETH0,    MBETH0,    MBETH0,    MBETH0)
     /* PCI0 slot 1 */	PCIIRQ(PCI0_INTB, PCI0_INTC, PCI0_INTD, PCI0_INTA)
     /* PCI0 slot 2 */	PCIIRQ(PCI0_INTC, PCI0_INTD, PCI0_INTA, PCI0_INTB)
     /* PCI0 slot 3 */	PCIIRQ(PCI0_INTD, PCI0_INTA, PCI0_INTB, PCI0_INTC)
 		};
 		const long min_idsel = 3, max_idsel = 7, irqs_per_slot = 4;
 		return PCI_IRQ_TABLE_LOOKUP;
 	} else {
 		static char pci_irq_table[][4] =
 		/*
 		 *             PCI IDSEL/INTPIN->INTLINE
 		 *             A          B          C          D
 		 */
 		{
     /* Ethernet 1 */	PCIIRQ(MBETH1,    MBETH1,    MBETH1,    MBETH1)
     /* SCSI */		PCIIRQ(MBSCSI,    MBSCSI,    MBSCSI,    MBSCSI)
     /* PCI1 slot 1 */	PCIIRQ(PCI1_INTB, PCI1_INTC, PCI1_INTD, PCI1_INTA)
     /* PCI1 slot 2 */	PCIIRQ(PCI1_INTC, PCI1_INTD, PCI1_INTA, PCI1_INTB)
     /* PCI1 slot 3 */	PCIIRQ(PCI1_INTD, PCI1_INTA, PCI1_INTB, PCI1_INTC)
 		};
 		const long min_idsel = 3, max_idsel = 7, irqs_per_slot = 4;
 		return PCI_IRQ_TABLE_LOOKUP;
 	}
 #undef PCIIRQ
 }

 static void
 adir_pcibios_fixup_resources(struct pci_dev *dev)
 {
 	int i;

 	if ((dev->vendor == PCI_VENDOR_ID_IBM) &&
 			(dev->device == PCI_DEVICE_ID_IBM_CPC710_PCI64))
 	{
 		DBG("Fixup CPC710 resources\n");
 		for (i=0; i<DEVICE_COUNT_RESOURCE; i++)
 		{
 			dev->resource[i].start = 0;
 			dev->resource[i].end = 0;
 		}
 	}
 }

 /*
  * CPC710 DD3 has an errata causing it to hang the system if a type 0 config
  * cycle is attempted on its PCI32 interface with a device number > 21.
  * CPC710's PCI bridges map device numbers 1 through 21 to AD11 through AD31.
  * Per the PCI spec it MUST accept all other device numbers and do nothing, and
  * software MUST scan all device numbers without assuming how IDSELs are
  * mapped. However, as the CPC710 DD3's errata causes such correct scanning
  * procedure to hang the system, we have no choice but to introduce this hack
  * of knowingly avoiding device numbers > 21 on PCI0,
  */
 static int
 adir_exclude_device(u_char bus, u_char devfn)
 {
 	if ((bus == 0) && (PCI_SLOT(devfn) > 21))
 		return PCIBIOS_DEVICE_NOT_FOUND;
 	else
 		return PCIBIOS_SUCCESSFUL;
 }

 void adir_find_bridges(void)
 {
 	struct pci_controller *hose_a, *hose_b;

 	/* Setup PCI32 hose */
 	hose_a = pcibios_alloc_controller();
 	if (!hose_a)
 		return;

 	hose_a->first_busno = 0;
 	hose_a->last_busno = 0xff;
 	hose_a->pci_mem_offset = ADIR_PCI32_MEM_BASE;
 	hose_a->io_space.start = 0;
 	hose_a->io_space.end = ADIR_PCI32_VIRT_IO_SIZE - 1;
 	hose_a->mem_space.start = 0;
 	hose_a->mem_space.end = ADIR_PCI32_MEM_SIZE - 1;
 	hose_a->io_resource.start = 0;
 	hose_a->io_resource.end = ADIR_PCI32_VIRT_IO_SIZE - 1;
 	hose_a->io_resource.flags = IORESOURCE_IO;
 	hose_a->mem_resources[0].start = ADIR_PCI32_MEM_BASE;
 	hose_a->mem_resources[0].end = ADIR_PCI32_MEM_BASE +
 					ADIR_PCI32_MEM_SIZE - 1;
 	hose_a->mem_resources[0].flags = IORESOURCE_MEM;
 	hose_a->io_base_phys = ADIR_PCI32_IO_BASE;
 	hose_a->io_base_virt = (void *) ADIR_PCI32_VIRT_IO_BASE;

 	ppc_md.pci_exclude_device = adir_exclude_device;
 	setup_indirect_pci(hose_a, ADIR_PCI32_CONFIG_ADDR,
 			   ADIR_PCI32_CONFIG_DATA);

 	/* Initialize PCI32 bus registers */
 	early_write_config_byte(hose_a,
 			hose_a->first_busno,
 			PCI_DEVFN(0, 0),
 			CPC710_BUS_NUMBER,
 			hose_a->first_busno);
 	early_write_config_byte(hose_a,
 			hose_a->first_busno,
 			PCI_DEVFN(0, 0),
 			CPC710_SUB_BUS_NUMBER,
 			hose_a->last_busno);

 	hose_a->last_busno = pciauto_bus_scan(hose_a, hose_a->first_busno);

 	/* Write out correct max subordinate bus number for hose A */
 	early_write_config_byte(hose_a,
 			hose_a->first_busno,
 			PCI_DEVFN(0, 0),
 			CPC710_SUB_BUS_NUMBER,
 			hose_a->last_busno);

 	/* Setup PCI64 hose */
 	hose_b = pcibios_alloc_controller();
 	if (!hose_b)
 		return;

 	hose_b->first_busno = hose_a->last_busno + 1;
 	hose_b->last_busno = 0xff;
 	hose_b->pci_mem_offset = ADIR_PCI64_MEM_BASE;
 	hose_b->io_space.start = 0;
 	hose_b->io_space.end = ADIR_PCI64_VIRT_IO_SIZE - 1;
 	hose_b->mem_space.start = 0;
 	hose_b->mem_space.end = ADIR_PCI64_MEM_SIZE - 1;
 	hose_b->io_resource.start = 0;
 	hose_b->io_resource.end = ADIR_PCI64_VIRT_IO_SIZE - 1;
 	hose_b->io_resource.flags = IORESOURCE_IO;
 	hose_b->mem_resources[0].start = ADIR_PCI64_MEM_BASE;
 	hose_b->mem_resources[0].end = ADIR_PCI64_MEM_BASE +
 					ADIR_PCI64_MEM_SIZE - 1;
 	hose_b->mem_resources[0].flags = IORESOURCE_MEM;
 	hose_b->io_base_phys = ADIR_PCI64_IO_BASE;
 	hose_b->io_base_virt = (void *) ADIR_PCI64_VIRT_IO_BASE;

 	setup_indirect_pci(hose_b, ADIR_PCI64_CONFIG_ADDR,
 			   ADIR_PCI64_CONFIG_DATA);

 	/* Initialize PCI64 bus registers */
 	early_write_config_byte(hose_b,
 			0,
 			PCI_DEVFN(0, 0),
 			CPC710_SUB_BUS_NUMBER,
 			0xff);

 	early_write_config_byte(hose_b,
 			0,
 			PCI_DEVFN(0, 0),
 			CPC710_BUS_NUMBER,
 			hose_b->first_busno);

 	hose_b->last_busno = pciauto_bus_scan(hose_b,
 			hose_b->first_busno);

 	/* Write out correct max subordinate bus number for hose B */
 	early_write_config_byte(hose_b,
 			hose_b->first_busno,
 			PCI_DEVFN(0, 0),
 			CPC710_SUB_BUS_NUMBER,
 			hose_b->last_busno);

 	ppc_md.pcibios_fixup = NULL;
 	ppc_md.pcibios_fixup_resources = adir_pcibios_fixup_resources;
 	ppc_md.pci_swizzle = common_swizzle;
 	ppc_md.pci_map_irq = adir_map_irq;
 }
	/*
	* arch/ppc/platforms/adir_pci.c
	*
	* PCI support for SBS Adirondack
	*
	* By Michael Sokolov <msokolov@ivan.Harhan.ORG>
	* based on the K2 version by Matt Porter <mporter@mvista.com>
	*/

	#include <linux/kernel.h>
	#include <linux/init.h>
	#include <linux/pci.h>
	#include <linux/slab.h>

	#include <asm/byteorder.h>
	#include <asm/io.h>
	#include <asm/uaccess.h>
	#include <asm/machdep.h>
	#include <asm/pci-bridge.h>

	#include <syslib/cpc710.h>
	#include "adir.h"

	#undef DEBUG
	#ifdef DEBUG
	#define DBG(x...) printk(x)
	#else
	#define DBG(x...)
	#endif /* DEBUG */

	static inline int __init
	adir_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
	{
	#define PCIIRQ(a,b,c,d) {ADIR_IRQ_##a,ADIR_IRQ_##b,ADIR_IRQ_##c,ADIR_IRQ_##d},
	struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
	/*
	* The three PCI devices on the motherboard have dedicated lines to the
	* CPLD interrupt controller, bypassing the standard PCI INTA-D and the
	* PC interrupt controller. All other PCI devices (slots) have usual
	* staggered INTA-D lines, resulting in 8 lines total (PCI0 INTA-D and
	* PCI1 INTA-D). All 8 go to the CPLD interrupt controller. PCI0 INTA-D
	* also go to the south bridge, so we have the option of taking them
	* via the CPLD interrupt controller or via the south bridge 8259
	* 8258 thingy. PCI1 INTA-D can only be taken via the CPLD interrupt
	* controller. We take all PCI interrupts via the CPLD interrupt
	* controller as recommended by SBS.
	*
	* We also have some monkey business with the PCI devices within the
	* VT82C686B south bridge itself. This chip actually has 7 functions on
	* its IDSEL. Function 0 is the actual south bridge, function 1 is IDE,
	* and function 4 is some special stuff. The other 4 functions are just
	* regular PCI devices bundled in the chip. 2 and 3 are USB UHCIs and 5
	* and 6 are audio (not supported on the Adirondack).
	*
	* This is where the monkey business begins. PCI devices are supposed
	* to signal normal PCI interrupts. But the 4 functions in question are
	* located in the south bridge chip, which is designed with the
	* assumption that it will be fielding PCI INTA-D interrupts rather
	* than generating them. Here's what it does. Each of the functions in
	* question routes its interrupt to one of the IRQs on the 8259 thingy.
	* Which one? It looks at the Interrupt Line register in the PCI config
	* space, even though the PCI spec says it's for BIOS/OS interaction
	* only.
	*
	* How do we deal with this? We take these interrupts via 8259 IRQs as
	* we have to. We return the desired IRQ numbers from this routine when
	* called for the functions in question. The PCI scan code will then
	* stick our return value into the Interrupt Line register in the PCI
	* config space, and the interrupt will actually go there. We identify
	* these functions within the south bridge IDSEL by their interrupt pin
	* numbers, as the VT82C686B has 04 in the Interrupt Pin register for
	* USB and 03 for audio.
	*/
	if (!hose->index) {
	static char pci_irq_table[][4] =
	/*
	* PCI IDSEL/INTPIN->INTLINE
	* A B C D
	*/
	{
	/* south bridge */ PCIIRQ(IDE0, NONE, VIA_AUDIO, VIA_USB)
	/* Ethernet 0 */ PCIIRQ(MBETH0, MBETH0, MBETH0, MBETH0)
	/* PCI0 slot 1 */ PCIIRQ(PCI0_INTB, PCI0_INTC, PCI0_INTD, PCI0_INTA)
	/* PCI0 slot 2 */ PCIIRQ(PCI0_INTC, PCI0_INTD, PCI0_INTA, PCI0_INTB)
	/* PCI0 slot 3 */ PCIIRQ(PCI0_INTD, PCI0_INTA, PCI0_INTB, PCI0_INTC)
	};
	const long min_idsel = 3, max_idsel = 7, irqs_per_slot = 4;
	return PCI_IRQ_TABLE_LOOKUP;
	} else {
	static char pci_irq_table[][4] =
	/*
	* PCI IDSEL/INTPIN->INTLINE
	* A B C D
	*/
	{
	/* Ethernet 1 */ PCIIRQ(MBETH1, MBETH1, MBETH1, MBETH1)
	/* SCSI */ PCIIRQ(MBSCSI, MBSCSI, MBSCSI, MBSCSI)
	/* PCI1 slot 1 */ PCIIRQ(PCI1_INTB, PCI1_INTC, PCI1_INTD, PCI1_INTA)
	/* PCI1 slot 2 */ PCIIRQ(PCI1_INTC, PCI1_INTD, PCI1_INTA, PCI1_INTB)
	/* PCI1 slot 3 */ PCIIRQ(PCI1_INTD, PCI1_INTA, PCI1_INTB, PCI1_INTC)
	};
	const long min_idsel = 3, max_idsel = 7, irqs_per_slot = 4;
	return PCI_IRQ_TABLE_LOOKUP;
	}
	#undef PCIIRQ
	}

	static void
	adir_pcibios_fixup_resources(struct pci_dev *dev)
	{
	int i;

	if ((dev->vendor == PCI_VENDOR_ID_IBM) &&
	(dev->device == PCI_DEVICE_ID_IBM_CPC710_PCI64))
	{
	DBG("Fixup CPC710 resources\n");
	for (i=0; i<DEVICE_COUNT_RESOURCE; i++)
	{
	dev->resource[i].start = 0;
	dev->resource[i].end = 0;
	}
	}
	}

	/*
	* CPC710 DD3 has an errata causing it to hang the system if a type 0 config
	* cycle is attempted on its PCI32 interface with a device number > 21.
	* CPC710's PCI bridges map device numbers 1 through 21 to AD11 through AD31.
	* Per the PCI spec it MUST accept all other device numbers and do nothing, and
	* software MUST scan all device numbers without assuming how IDSELs are
	* mapped. However, as the CPC710 DD3's errata causes such correct scanning
	* procedure to hang the system, we have no choice but to introduce this hack
	* of knowingly avoiding device numbers > 21 on PCI0,
	*/
	static int
	adir_exclude_device(u_char bus, u_char devfn)
	{
	if ((bus == 0) && (PCI_SLOT(devfn) > 21))
	return PCIBIOS_DEVICE_NOT_FOUND;
	else
	return PCIBIOS_SUCCESSFUL;
	}

	void adir_find_bridges(void)
	{
	struct pci_controller hose_a, hose_b;

	/* Setup PCI32 hose */
	hose_a = pcibios_alloc_controller();
	if (!hose_a)
	return;

	hose_a->first_busno = 0;
	hose_a->last_busno = 0xff;
	hose_a->pci_mem_offset = ADIR_PCI32_MEM_BASE;
	hose_a->io_space.start = 0;
	hose_a->io_space.end = ADIR_PCI32_VIRT_IO_SIZE - 1;
	hose_a->mem_space.start = 0;
	hose_a->mem_space.end = ADIR_PCI32_MEM_SIZE - 1;
	hose_a->io_resource.start = 0;
	hose_a->io_resource.end = ADIR_PCI32_VIRT_IO_SIZE - 1;
	hose_a->io_resource.flags = IORESOURCE_IO;
	hose_a->mem_resources[0].start = ADIR_PCI32_MEM_BASE;
	hose_a->mem_resources[0].end = ADIR_PCI32_MEM_BASE +
	ADIR_PCI32_MEM_SIZE - 1;
	hose_a->mem_resources[0].flags = IORESOURCE_MEM;
	hose_a->io_base_phys = ADIR_PCI32_IO_BASE;
	hose_a->io_base_virt = (void *) ADIR_PCI32_VIRT_IO_BASE;

	ppc_md.pci_exclude_device = adir_exclude_device;
	setup_indirect_pci(hose_a, ADIR_PCI32_CONFIG_ADDR,
	ADIR_PCI32_CONFIG_DATA);

	/* Initialize PCI32 bus registers */
	early_write_config_byte(hose_a,
	hose_a->first_busno,
	PCI_DEVFN(0, 0),
	CPC710_BUS_NUMBER,
	hose_a->first_busno);
	early_write_config_byte(hose_a,
	hose_a->first_busno,
	PCI_DEVFN(0, 0),
	CPC710_SUB_BUS_NUMBER,
	hose_a->last_busno);

	hose_a->last_busno = pciauto_bus_scan(hose_a, hose_a->first_busno);

	/* Write out correct max subordinate bus number for hose A */
	early_write_config_byte(hose_a,
	hose_a->first_busno,
	PCI_DEVFN(0, 0),
	CPC710_SUB_BUS_NUMBER,
	hose_a->last_busno);

	/* Setup PCI64 hose */
	hose_b = pcibios_alloc_controller();
	if (!hose_b)
	return;

	hose_b->first_busno = hose_a->last_busno + 1;
	hose_b->last_busno = 0xff;
	hose_b->pci_mem_offset = ADIR_PCI64_MEM_BASE;
	hose_b->io_space.start = 0;
	hose_b->io_space.end = ADIR_PCI64_VIRT_IO_SIZE - 1;
	hose_b->mem_space.start = 0;
	hose_b->mem_space.end = ADIR_PCI64_MEM_SIZE - 1;
	hose_b->io_resource.start = 0;
	hose_b->io_resource.end = ADIR_PCI64_VIRT_IO_SIZE - 1;
	hose_b->io_resource.flags = IORESOURCE_IO;
	hose_b->mem_resources[0].start = ADIR_PCI64_MEM_BASE;
	hose_b->mem_resources[0].end = ADIR_PCI64_MEM_BASE +
	ADIR_PCI64_MEM_SIZE - 1;
	hose_b->mem_resources[0].flags = IORESOURCE_MEM;
	hose_b->io_base_phys = ADIR_PCI64_IO_BASE;
	hose_b->io_base_virt = (void *) ADIR_PCI64_VIRT_IO_BASE;

	setup_indirect_pci(hose_b, ADIR_PCI64_CONFIG_ADDR,
	ADIR_PCI64_CONFIG_DATA);

	/* Initialize PCI64 bus registers */
	early_write_config_byte(hose_b,
	0,
	PCI_DEVFN(0, 0),
	CPC710_SUB_BUS_NUMBER,
	0xff);

	early_write_config_byte(hose_b,
	0,
	PCI_DEVFN(0, 0),
	CPC710_BUS_NUMBER,
	hose_b->first_busno);

	hose_b->last_busno = pciauto_bus_scan(hose_b,
	hose_b->first_busno);

	/* Write out correct max subordinate bus number for hose B */
	early_write_config_byte(hose_b,
	hose_b->first_busno,
	PCI_DEVFN(0, 0),
	CPC710_SUB_BUS_NUMBER,
	hose_b->last_busno);

	ppc_md.pcibios_fixup = NULL;
	ppc_md.pcibios_fixup_resources = adir_pcibios_fixup_resources;
	ppc_md.pci_swizzle = common_swizzle;
	ppc_md.pci_map_irq = adir_map_irq;
	}