| /* Copyright (c) 2011-2012, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/io.h> |
| #include <linux/ioport.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/elf.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/workqueue.h> |
| |
| #include <mach/msm_bus.h> |
| #include <mach/msm_iomap.h> |
| #include <mach/msm_xo.h> |
| |
| #include "peripheral-loader.h" |
| #include "pil-q6v4.h" |
| #include "scm-pas.h" |
| |
| #define PROXY_VOTE_TIMEOUT 40000 |
| |
| #define QDSP6SS_RST_EVB 0x0 |
| #define QDSP6SS_RESET 0x04 |
| #define QDSP6SS_CGC_OVERRIDE 0x18 |
| #define QDSP6SS_STRAP_TCM 0x1C |
| #define QDSP6SS_STRAP_AHB 0x20 |
| #define QDSP6SS_GFMUX_CTL 0x30 |
| #define QDSP6SS_PWR_CTL 0x38 |
| |
| #define MSS_S_HCLK_CTL (MSM_CLK_CTL_BASE + 0x2C70) |
| #define MSS_SLP_CLK_CTL (MSM_CLK_CTL_BASE + 0x2C60) |
| #define SFAB_MSS_M_ACLK_CTL (MSM_CLK_CTL_BASE + 0x2340) |
| #define SFAB_MSS_S_HCLK_CTL (MSM_CLK_CTL_BASE + 0x2C00) |
| #define MSS_RESET (MSM_CLK_CTL_BASE + 0x2C64) |
| |
| #define Q6SS_SS_ARES BIT(0) |
| #define Q6SS_CORE_ARES BIT(1) |
| #define Q6SS_ISDB_ARES BIT(2) |
| #define Q6SS_ETM_ARES BIT(3) |
| #define Q6SS_STOP_CORE_ARES BIT(4) |
| #define Q6SS_PRIV_ARES BIT(5) |
| |
| #define Q6SS_L2DATA_SLP_NRET_N BIT(0) |
| #define Q6SS_SLP_RET_N BIT(1) |
| #define Q6SS_L1TCM_SLP_NRET_N BIT(2) |
| #define Q6SS_L2TAG_SLP_NRET_N BIT(3) |
| #define Q6SS_ETB_SLEEP_NRET_N BIT(4) |
| #define Q6SS_ARR_STBY_N BIT(5) |
| #define Q6SS_CLAMP_IO BIT(6) |
| |
| #define Q6SS_CLK_ENA BIT(1) |
| #define Q6SS_SRC_SWITCH_CLK_OVR BIT(8) |
| #define Q6SS_AXIS_ACLK_EN BIT(9) |
| |
| struct q6v4_data { |
| void __iomem *base; |
| void __iomem *modem_base; |
| unsigned long start_addr; |
| struct regulator *vreg; |
| struct regulator *pll_supply; |
| bool vreg_enabled; |
| struct msm_xo_voter *xo; |
| struct delayed_work work; |
| }; |
| |
| static int pil_q6v4_init_image(struct pil_desc *pil, const u8 *metadata, |
| size_t size) |
| { |
| const struct elf32_hdr *ehdr = (struct elf32_hdr *)metadata; |
| struct q6v4_data *drv = dev_get_drvdata(pil->dev); |
| drv->start_addr = ehdr->e_entry; |
| return 0; |
| } |
| |
| static int nop_verify_blob(struct pil_desc *pil, u32 phy_addr, size_t size) |
| { |
| return 0; |
| } |
| |
| static void pil_q6v4_make_proxy_votes(struct device *dev) |
| { |
| struct q6v4_data *drv = dev_get_drvdata(dev); |
| int ret; |
| |
| msm_xo_mode_vote(drv->xo, MSM_XO_MODE_ON); |
| if (drv->pll_supply) { |
| ret = regulator_enable(drv->pll_supply); |
| if (ret) |
| dev_err(dev, "failed to enable pll supply\n"); |
| } |
| schedule_delayed_work(&drv->work, msecs_to_jiffies(PROXY_VOTE_TIMEOUT)); |
| } |
| |
| static void pil_q6v4_remove_proxy_votes(struct work_struct *work) |
| { |
| struct q6v4_data *drv = container_of(work, struct q6v4_data, work.work); |
| if (drv->pll_supply) |
| regulator_disable(drv->pll_supply); |
| msm_xo_mode_vote(drv->xo, MSM_XO_MODE_OFF); |
| } |
| |
| static void pil_q6v4_remove_proxy_votes_now(struct device *dev) |
| { |
| struct q6v4_data *drv = dev_get_drvdata(dev); |
| flush_delayed_work(&drv->work); |
| } |
| |
| static int pil_q6v4_power_up(struct device *dev) |
| { |
| int err; |
| struct q6v4_data *drv = dev_get_drvdata(dev); |
| |
| err = regulator_set_voltage(drv->vreg, 1050000, 1050000); |
| if (err) { |
| dev_err(dev, "Failed to set regulator's voltage.\n"); |
| return err; |
| } |
| err = regulator_set_optimum_mode(drv->vreg, 100000); |
| if (err < 0) { |
| dev_err(dev, "Failed to set regulator's mode.\n"); |
| return err; |
| } |
| err = regulator_enable(drv->vreg); |
| if (err) { |
| dev_err(dev, "Failed to enable regulator.\n"); |
| return err; |
| } |
| drv->vreg_enabled = true; |
| return 0; |
| } |
| |
| static DEFINE_MUTEX(pil_q6v4_modem_lock); |
| static unsigned pil_q6v4_modem_count; |
| |
| /* Bring modem subsystem out of reset */ |
| static void pil_q6v4_init_modem(void __iomem *base, void __iomem *jtag_clk) |
| { |
| mutex_lock(&pil_q6v4_modem_lock); |
| if (!pil_q6v4_modem_count) { |
| /* Enable MSS clocks */ |
| writel_relaxed(0x10, SFAB_MSS_M_ACLK_CTL); |
| writel_relaxed(0x10, SFAB_MSS_S_HCLK_CTL); |
| writel_relaxed(0x10, MSS_S_HCLK_CTL); |
| writel_relaxed(0x10, MSS_SLP_CLK_CTL); |
| /* Wait for clocks to enable */ |
| mb(); |
| udelay(10); |
| |
| /* De-assert MSS reset */ |
| writel_relaxed(0x0, MSS_RESET); |
| mb(); |
| udelay(10); |
| /* Enable MSS */ |
| writel_relaxed(0x7, base); |
| } |
| |
| /* Enable JTAG clocks */ |
| /* TODO: Remove if/when Q6 software enables them? */ |
| writel_relaxed(0x10, jtag_clk); |
| |
| pil_q6v4_modem_count++; |
| mutex_unlock(&pil_q6v4_modem_lock); |
| } |
| |
| /* Put modem subsystem back into reset */ |
| static void pil_q6v4_shutdown_modem(void) |
| { |
| mutex_lock(&pil_q6v4_modem_lock); |
| if (pil_q6v4_modem_count) |
| pil_q6v4_modem_count--; |
| if (pil_q6v4_modem_count == 0) |
| writel_relaxed(0x1, MSS_RESET); |
| mutex_unlock(&pil_q6v4_modem_lock); |
| } |
| |
| static int pil_q6v4_reset(struct pil_desc *pil) |
| { |
| u32 reg, err = 0; |
| const struct q6v4_data *drv = dev_get_drvdata(pil->dev); |
| const struct pil_q6v4_pdata *pdata = pil->dev->platform_data; |
| |
| pil_q6v4_make_proxy_votes(pil->dev); |
| |
| err = pil_q6v4_power_up(pil->dev); |
| if (err) |
| return err; |
| /* Enable Q6 ACLK */ |
| writel_relaxed(0x10, pdata->aclk_reg); |
| |
| if (drv->modem_base) |
| pil_q6v4_init_modem(drv->modem_base, pdata->jtag_clk_reg); |
| |
| /* Unhalt bus port */ |
| err = msm_bus_axi_portunhalt(pdata->bus_port); |
| if (err) |
| dev_err(pil->dev, "Failed to unhalt bus port\n"); |
| |
| /* |
| * Assert AXIS_ACLK_EN override to allow for correct updating of the |
| * QDSP6_CORE_STATE status bit. This is mandatory only for the SW Q6 |
| * in 8960v1 and optional elsewhere. |
| */ |
| reg = readl_relaxed(drv->base + QDSP6SS_CGC_OVERRIDE); |
| reg |= Q6SS_AXIS_ACLK_EN; |
| writel_relaxed(reg, drv->base + QDSP6SS_CGC_OVERRIDE); |
| |
| /* Deassert Q6SS_SS_ARES */ |
| reg = readl_relaxed(drv->base + QDSP6SS_RESET); |
| reg &= ~(Q6SS_SS_ARES); |
| writel_relaxed(reg, drv->base + QDSP6SS_RESET); |
| |
| /* Program boot address */ |
| writel_relaxed((drv->start_addr >> 8) & 0xFFFFFF, |
| drv->base + QDSP6SS_RST_EVB); |
| |
| /* Program TCM and AHB address ranges */ |
| writel_relaxed(pdata->strap_tcm_base, drv->base + QDSP6SS_STRAP_TCM); |
| writel_relaxed(pdata->strap_ahb_upper | pdata->strap_ahb_lower, |
| drv->base + QDSP6SS_STRAP_AHB); |
| |
| /* Turn off Q6 core clock */ |
| writel_relaxed(Q6SS_SRC_SWITCH_CLK_OVR, |
| drv->base + QDSP6SS_GFMUX_CTL); |
| |
| /* Put memories to sleep */ |
| writel_relaxed(Q6SS_CLAMP_IO, drv->base + QDSP6SS_PWR_CTL); |
| |
| /* Assert resets */ |
| reg = readl_relaxed(drv->base + QDSP6SS_RESET); |
| reg |= (Q6SS_CORE_ARES | Q6SS_ISDB_ARES | Q6SS_ETM_ARES |
| | Q6SS_STOP_CORE_ARES); |
| writel_relaxed(reg, drv->base + QDSP6SS_RESET); |
| |
| /* Wait 8 AHB cycles for Q6 to be fully reset (AHB = 1.5Mhz) */ |
| mb(); |
| usleep_range(20, 30); |
| |
| /* Turn on Q6 memories */ |
| reg = Q6SS_L2DATA_SLP_NRET_N | Q6SS_SLP_RET_N | Q6SS_L1TCM_SLP_NRET_N |
| | Q6SS_L2TAG_SLP_NRET_N | Q6SS_ETB_SLEEP_NRET_N | Q6SS_ARR_STBY_N |
| | Q6SS_CLAMP_IO; |
| writel_relaxed(reg, drv->base + QDSP6SS_PWR_CTL); |
| |
| /* Turn on Q6 core clock */ |
| reg = Q6SS_CLK_ENA | Q6SS_SRC_SWITCH_CLK_OVR; |
| writel_relaxed(reg, drv->base + QDSP6SS_GFMUX_CTL); |
| |
| /* Remove Q6SS_CLAMP_IO */ |
| reg = readl_relaxed(drv->base + QDSP6SS_PWR_CTL); |
| reg &= ~Q6SS_CLAMP_IO; |
| writel_relaxed(reg, drv->base + QDSP6SS_PWR_CTL); |
| |
| /* Bring Q6 core out of reset and start execution. */ |
| writel_relaxed(0x0, drv->base + QDSP6SS_RESET); |
| |
| /* |
| * Re-enable auto-gating of AXIS_ACLK at lease one AXI clock cycle |
| * after resets are de-asserted. |
| */ |
| mb(); |
| usleep_range(1, 10); |
| reg = readl_relaxed(drv->base + QDSP6SS_CGC_OVERRIDE); |
| reg &= ~Q6SS_AXIS_ACLK_EN; |
| writel_relaxed(reg, drv->base + QDSP6SS_CGC_OVERRIDE); |
| |
| return 0; |
| } |
| |
| static int pil_q6v4_shutdown(struct pil_desc *pil) |
| { |
| u32 reg; |
| struct q6v4_data *drv = dev_get_drvdata(pil->dev); |
| const struct pil_q6v4_pdata *pdata = pil->dev->platform_data; |
| |
| /* Make sure bus port is halted */ |
| msm_bus_axi_porthalt(pdata->bus_port); |
| |
| /* Turn off Q6 core clock */ |
| writel_relaxed(Q6SS_SRC_SWITCH_CLK_OVR, |
| drv->base + QDSP6SS_GFMUX_CTL); |
| |
| /* Assert resets */ |
| reg = (Q6SS_SS_ARES | Q6SS_CORE_ARES | Q6SS_ISDB_ARES |
| | Q6SS_ETM_ARES | Q6SS_STOP_CORE_ARES | Q6SS_PRIV_ARES); |
| writel_relaxed(reg, drv->base + QDSP6SS_RESET); |
| |
| /* Turn off Q6 memories */ |
| writel_relaxed(Q6SS_CLAMP_IO, drv->base + QDSP6SS_PWR_CTL); |
| |
| if (drv->modem_base) |
| pil_q6v4_shutdown_modem(); |
| |
| if (drv->vreg_enabled) { |
| regulator_disable(drv->vreg); |
| drv->vreg_enabled = false; |
| } |
| |
| pil_q6v4_remove_proxy_votes_now(pil->dev); |
| |
| return 0; |
| } |
| |
| static struct pil_reset_ops pil_q6v4_ops = { |
| .init_image = pil_q6v4_init_image, |
| .verify_blob = nop_verify_blob, |
| .auth_and_reset = pil_q6v4_reset, |
| .shutdown = pil_q6v4_shutdown, |
| }; |
| |
| static int pil_q6v4_init_image_trusted(struct pil_desc *pil, |
| const u8 *metadata, size_t size) |
| { |
| const struct pil_q6v4_pdata *pdata = pil->dev->platform_data; |
| return pas_init_image(pdata->pas_id, metadata, size); |
| } |
| |
| static int pil_q6v4_reset_trusted(struct pil_desc *pil) |
| { |
| const struct pil_q6v4_pdata *pdata = pil->dev->platform_data; |
| int err; |
| |
| pil_q6v4_make_proxy_votes(pil->dev); |
| |
| err = pil_q6v4_power_up(pil->dev); |
| if (err) |
| return err; |
| |
| /* Unhalt bus port */ |
| err = msm_bus_axi_portunhalt(pdata->bus_port); |
| if (err) |
| dev_err(pil->dev, "Failed to unhalt bus port\n"); |
| return pas_auth_and_reset(pdata->pas_id); |
| } |
| |
| static int pil_q6v4_shutdown_trusted(struct pil_desc *pil) |
| { |
| int ret; |
| struct q6v4_data *drv = dev_get_drvdata(pil->dev); |
| struct pil_q6v4_pdata *pdata = pil->dev->platform_data; |
| |
| /* Make sure bus port is halted */ |
| msm_bus_axi_porthalt(pdata->bus_port); |
| |
| ret = pas_shutdown(pdata->pas_id); |
| if (ret) |
| return ret; |
| |
| if (drv->vreg_enabled) { |
| regulator_disable(drv->vreg); |
| drv->vreg_enabled = false; |
| } |
| |
| pil_q6v4_remove_proxy_votes_now(pil->dev); |
| |
| return ret; |
| } |
| |
| static struct pil_reset_ops pil_q6v4_ops_trusted = { |
| .init_image = pil_q6v4_init_image_trusted, |
| .verify_blob = nop_verify_blob, |
| .auth_and_reset = pil_q6v4_reset_trusted, |
| .shutdown = pil_q6v4_shutdown_trusted, |
| }; |
| |
| static int __devinit pil_q6v4_driver_probe(struct platform_device *pdev) |
| { |
| const struct pil_q6v4_pdata *pdata = pdev->dev.platform_data; |
| struct q6v4_data *drv; |
| struct resource *res; |
| struct pil_desc *desc; |
| int ret; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) |
| return -EINVAL; |
| |
| drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL); |
| if (!drv) |
| return -ENOMEM; |
| platform_set_drvdata(pdev, drv); |
| |
| drv->base = devm_ioremap(&pdev->dev, res->start, resource_size(res)); |
| if (!drv->base) |
| return -ENOMEM; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| if (res) { |
| drv->modem_base = devm_ioremap(&pdev->dev, res->start, |
| resource_size(res)); |
| if (!drv->modem_base) |
| return -ENOMEM; |
| } |
| |
| desc = devm_kzalloc(&pdev->dev, sizeof(*desc), GFP_KERNEL); |
| if (!desc) |
| return -ENOMEM; |
| |
| drv->pll_supply = regulator_get(&pdev->dev, "pll_vdd"); |
| if (IS_ERR(drv->pll_supply)) { |
| drv->pll_supply = NULL; |
| } else { |
| ret = regulator_set_voltage(drv->pll_supply, 1800000, 1800000); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to set pll voltage\n"); |
| goto err; |
| } |
| |
| ret = regulator_set_optimum_mode(drv->pll_supply, 100000); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "failed to set pll optimum mode\n"); |
| goto err; |
| } |
| } |
| |
| desc->name = pdata->name; |
| desc->depends_on = pdata->depends; |
| desc->dev = &pdev->dev; |
| |
| if (pas_supported(pdata->pas_id) > 0) { |
| desc->ops = &pil_q6v4_ops_trusted; |
| dev_info(&pdev->dev, "using secure boot\n"); |
| } else { |
| desc->ops = &pil_q6v4_ops; |
| dev_info(&pdev->dev, "using non-secure boot\n"); |
| } |
| |
| drv->vreg = regulator_get(&pdev->dev, "core_vdd"); |
| if (IS_ERR(drv->vreg)) { |
| ret = PTR_ERR(drv->vreg); |
| goto err; |
| } |
| |
| drv->xo = msm_xo_get(pdata->xo_id, pdata->name); |
| if (IS_ERR(drv->xo)) { |
| ret = PTR_ERR(drv->xo); |
| goto err_xo; |
| } |
| INIT_DELAYED_WORK(&drv->work, pil_q6v4_remove_proxy_votes); |
| |
| ret = msm_pil_register(desc); |
| if (ret) |
| goto err_pil; |
| return 0; |
| err_pil: |
| cancel_delayed_work_sync(&drv->work); |
| msm_xo_put(drv->xo); |
| err_xo: |
| regulator_put(drv->vreg); |
| err: |
| regulator_put(drv->pll_supply); |
| return ret; |
| } |
| |
| static int __devexit pil_q6v4_driver_exit(struct platform_device *pdev) |
| { |
| struct q6v4_data *drv = platform_get_drvdata(pdev); |
| cancel_delayed_work_sync(&drv->work); |
| msm_xo_put(drv->xo); |
| regulator_put(drv->vreg); |
| regulator_put(drv->pll_supply); |
| return 0; |
| } |
| |
| static struct platform_driver pil_q6v4_driver = { |
| .probe = pil_q6v4_driver_probe, |
| .remove = __devexit_p(pil_q6v4_driver_exit), |
| .driver = { |
| .name = "pil_qdsp6v4", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init pil_q6v4_init(void) |
| { |
| return platform_driver_register(&pil_q6v4_driver); |
| } |
| module_init(pil_q6v4_init); |
| |
| static void __exit pil_q6v4_exit(void) |
| { |
| platform_driver_unregister(&pil_q6v4_driver); |
| } |
| module_exit(pil_q6v4_exit); |
| |
| MODULE_DESCRIPTION("Support for booting QDSP6v4 (Hexagon) processors"); |
| MODULE_LICENSE("GPL v2"); |