| /* |
| * Copyright (c) 2011-2012, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/kernel.h> |
| #include <linux/device.h> |
| #include <linux/usb/android_composite.h> |
| #include <linux/spinlock.h> |
| |
| #include <mach/usb_gadget_xport.h> |
| |
| #include "u_rmnet.h" |
| #include "gadget_chips.h" |
| |
| #define RMNET_NOTIFY_INTERVAL 5 |
| #define RMNET_MAX_NOTIFY_SIZE sizeof(struct usb_cdc_notification) |
| |
| struct rmnet_descs { |
| struct usb_endpoint_descriptor *in; |
| struct usb_endpoint_descriptor *out; |
| struct usb_endpoint_descriptor *notify; |
| }; |
| |
| #define ACM_CTRL_DTR (1 << 0) |
| |
| /* TODO: use separate structures for data and |
| * control paths |
| */ |
| struct f_rmnet { |
| struct grmnet port; |
| int ifc_id; |
| u8 port_num; |
| atomic_t online; |
| atomic_t ctrl_online; |
| struct usb_composite_dev *cdev; |
| |
| spinlock_t lock; |
| |
| /* usb descriptors */ |
| struct rmnet_descs fs; |
| struct rmnet_descs hs; |
| |
| /* usb eps*/ |
| struct usb_ep *notify; |
| struct usb_endpoint_descriptor *notify_desc; |
| struct usb_request *notify_req; |
| |
| /* control info */ |
| struct list_head cpkt_resp_q; |
| atomic_t notify_count; |
| unsigned long cpkts_len; |
| }; |
| |
| #define NR_RMNET_PORTS 1 |
| static unsigned int nr_rmnet_ports; |
| static unsigned int no_ctrl_smd_ports; |
| static unsigned int no_ctrl_hsic_ports; |
| static unsigned int no_data_bam_ports; |
| static unsigned int no_data_bam2bam_ports; |
| static unsigned int no_data_hsic_ports; |
| static struct rmnet_ports { |
| enum transport_type data_xport; |
| enum transport_type ctrl_xport; |
| unsigned data_xport_num; |
| unsigned ctrl_xport_num; |
| unsigned port_num; |
| struct f_rmnet *port; |
| } rmnet_ports[NR_RMNET_PORTS]; |
| |
| static struct usb_interface_descriptor rmnet_interface_desc = { |
| .bLength = USB_DT_INTERFACE_SIZE, |
| .bDescriptorType = USB_DT_INTERFACE, |
| .bNumEndpoints = 3, |
| .bInterfaceClass = USB_CLASS_VENDOR_SPEC, |
| .bInterfaceSubClass = USB_CLASS_VENDOR_SPEC, |
| .bInterfaceProtocol = USB_CLASS_VENDOR_SPEC, |
| /* .iInterface = DYNAMIC */ |
| }; |
| |
| /* Full speed support */ |
| static struct usb_endpoint_descriptor rmnet_fs_notify_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bEndpointAddress = USB_DIR_IN, |
| .bmAttributes = USB_ENDPOINT_XFER_INT, |
| .wMaxPacketSize = __constant_cpu_to_le16(RMNET_MAX_NOTIFY_SIZE), |
| .bInterval = 1 << RMNET_NOTIFY_INTERVAL, |
| }; |
| |
| static struct usb_endpoint_descriptor rmnet_fs_in_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bEndpointAddress = USB_DIR_IN, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = __constant_cpu_to_le16(64), |
| }; |
| |
| static struct usb_endpoint_descriptor rmnet_fs_out_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bEndpointAddress = USB_DIR_OUT, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = __constant_cpu_to_le16(64), |
| }; |
| |
| static struct usb_descriptor_header *rmnet_fs_function[] = { |
| (struct usb_descriptor_header *) &rmnet_interface_desc, |
| (struct usb_descriptor_header *) &rmnet_fs_notify_desc, |
| (struct usb_descriptor_header *) &rmnet_fs_in_desc, |
| (struct usb_descriptor_header *) &rmnet_fs_out_desc, |
| NULL, |
| }; |
| |
| /* High speed support */ |
| static struct usb_endpoint_descriptor rmnet_hs_notify_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bEndpointAddress = USB_DIR_IN, |
| .bmAttributes = USB_ENDPOINT_XFER_INT, |
| .wMaxPacketSize = __constant_cpu_to_le16(RMNET_MAX_NOTIFY_SIZE), |
| .bInterval = RMNET_NOTIFY_INTERVAL + 4, |
| }; |
| |
| static struct usb_endpoint_descriptor rmnet_hs_in_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bEndpointAddress = USB_DIR_IN, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = __constant_cpu_to_le16(512), |
| }; |
| |
| static struct usb_endpoint_descriptor rmnet_hs_out_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bEndpointAddress = USB_DIR_OUT, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = __constant_cpu_to_le16(512), |
| }; |
| |
| static struct usb_descriptor_header *rmnet_hs_function[] = { |
| (struct usb_descriptor_header *) &rmnet_interface_desc, |
| (struct usb_descriptor_header *) &rmnet_hs_notify_desc, |
| (struct usb_descriptor_header *) &rmnet_hs_in_desc, |
| (struct usb_descriptor_header *) &rmnet_hs_out_desc, |
| NULL, |
| }; |
| |
| /* String descriptors */ |
| |
| static struct usb_string rmnet_string_defs[] = { |
| [0].s = "RmNet", |
| { } /* end of list */ |
| }; |
| |
| static struct usb_gadget_strings rmnet_string_table = { |
| .language = 0x0409, /* en-us */ |
| .strings = rmnet_string_defs, |
| }; |
| |
| static struct usb_gadget_strings *rmnet_strings[] = { |
| &rmnet_string_table, |
| NULL, |
| }; |
| |
| /* ------- misc functions --------------------*/ |
| |
| static inline struct f_rmnet *func_to_rmnet(struct usb_function *f) |
| { |
| return container_of(f, struct f_rmnet, port.func); |
| } |
| |
| static inline struct f_rmnet *port_to_rmnet(struct grmnet *r) |
| { |
| return container_of(r, struct f_rmnet, port); |
| } |
| |
| static struct usb_request * |
| frmnet_alloc_req(struct usb_ep *ep, unsigned len, gfp_t flags) |
| { |
| struct usb_request *req; |
| |
| req = usb_ep_alloc_request(ep, flags); |
| if (!req) |
| return ERR_PTR(-ENOMEM); |
| |
| req->buf = kmalloc(len, flags); |
| if (!req->buf) { |
| usb_ep_free_request(ep, req); |
| return ERR_PTR(-ENOMEM); |
| } |
| |
| req->length = len; |
| |
| return req; |
| } |
| |
| void frmnet_free_req(struct usb_ep *ep, struct usb_request *req) |
| { |
| kfree(req->buf); |
| usb_ep_free_request(ep, req); |
| } |
| |
| static struct rmnet_ctrl_pkt *rmnet_alloc_ctrl_pkt(unsigned len, gfp_t flags) |
| { |
| struct rmnet_ctrl_pkt *pkt; |
| |
| pkt = kzalloc(sizeof(struct rmnet_ctrl_pkt), flags); |
| if (!pkt) |
| return ERR_PTR(-ENOMEM); |
| |
| pkt->buf = kmalloc(len, flags); |
| if (!pkt->buf) { |
| kfree(pkt); |
| return ERR_PTR(-ENOMEM); |
| } |
| pkt->len = len; |
| |
| return pkt; |
| } |
| |
| static void rmnet_free_ctrl_pkt(struct rmnet_ctrl_pkt *pkt) |
| { |
| kfree(pkt->buf); |
| kfree(pkt); |
| } |
| |
| /* -------------------------------------------*/ |
| |
| static int rmnet_gport_setup(void) |
| { |
| int ret; |
| int port_idx; |
| int i; |
| |
| pr_debug("%s: bam ports: %u bam2bam ports: %u data hsic ports: %u" |
| " smd ports: %u ctrl hsic ports: %u" |
| " nr_rmnet_ports: %u\n", |
| __func__, no_data_bam_ports, no_data_bam2bam_ports, |
| no_data_hsic_ports, no_ctrl_smd_ports, |
| no_ctrl_hsic_ports, nr_rmnet_ports); |
| |
| if (no_data_bam_ports || no_data_bam2bam_ports) { |
| ret = gbam_setup(no_data_bam_ports, |
| no_data_bam2bam_ports); |
| if (ret) |
| return ret; |
| } |
| |
| if (no_ctrl_smd_ports) { |
| ret = gsmd_ctrl_setup(no_ctrl_smd_ports); |
| if (ret) |
| return ret; |
| } |
| |
| if (no_data_hsic_ports) { |
| port_idx = ghsic_data_setup(no_data_hsic_ports, |
| USB_GADGET_RMNET); |
| if (port_idx < 0) |
| return port_idx; |
| for (i = 0; i < nr_rmnet_ports; i++) { |
| if (rmnet_ports[i].data_xport == |
| USB_GADGET_XPORT_HSIC) { |
| rmnet_ports[i].data_xport_num = port_idx; |
| port_idx++; |
| } |
| } |
| } |
| |
| if (no_ctrl_hsic_ports) { |
| port_idx = ghsic_ctrl_setup(no_ctrl_hsic_ports, |
| USB_GADGET_RMNET); |
| if (port_idx < 0) |
| return port_idx; |
| for (i = 0; i < nr_rmnet_ports; i++) { |
| if (rmnet_ports[i].ctrl_xport == |
| USB_GADGET_XPORT_HSIC) { |
| rmnet_ports[i].ctrl_xport_num = port_idx; |
| port_idx++; |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int gport_rmnet_connect(struct f_rmnet *dev) |
| { |
| int ret; |
| unsigned port_num; |
| enum transport_type cxport = rmnet_ports[dev->port_num].ctrl_xport; |
| enum transport_type dxport = rmnet_ports[dev->port_num].data_xport; |
| |
| pr_debug("%s: ctrl xport: %s data xport: %s dev: %p portno: %d\n", |
| __func__, xport_to_str(cxport), xport_to_str(dxport), |
| dev, dev->port_num); |
| |
| port_num = rmnet_ports[dev->port_num].ctrl_xport_num; |
| switch (cxport) { |
| case USB_GADGET_XPORT_SMD: |
| ret = gsmd_ctrl_connect(&dev->port, port_num); |
| if (ret) { |
| pr_err("%s: gsmd_ctrl_connect failed: err:%d\n", |
| __func__, ret); |
| return ret; |
| } |
| break; |
| case USB_GADGET_XPORT_HSIC: |
| ret = ghsic_ctrl_connect(&dev->port, port_num); |
| if (ret) { |
| pr_err("%s: ghsic_ctrl_connect failed: err:%d\n", |
| __func__, ret); |
| return ret; |
| } |
| break; |
| case USB_GADGET_XPORT_NONE: |
| break; |
| default: |
| pr_err("%s: Un-supported transport: %s\n", __func__, |
| xport_to_str(cxport)); |
| return -ENODEV; |
| } |
| |
| port_num = rmnet_ports[dev->port_num].data_xport_num; |
| switch (dxport) { |
| case USB_GADGET_XPORT_BAM: |
| case USB_GADGET_XPORT_BAM2BAM: |
| /* currently only one connection (idx 0) |
| is supported */ |
| ret = gbam_connect(&dev->port, port_num, |
| dxport, 0); |
| if (ret) { |
| pr_err("%s: gbam_connect failed: err:%d\n", |
| __func__, ret); |
| gsmd_ctrl_disconnect(&dev->port, port_num); |
| return ret; |
| } |
| break; |
| case USB_GADGET_XPORT_HSIC: |
| ret = ghsic_data_connect(&dev->port, port_num); |
| if (ret) { |
| pr_err("%s: ghsic_data_connect failed: err:%d\n", |
| __func__, ret); |
| ghsic_ctrl_disconnect(&dev->port, port_num); |
| return ret; |
| } |
| break; |
| case USB_GADGET_XPORT_NONE: |
| break; |
| default: |
| pr_err("%s: Un-supported transport: %s\n", __func__, |
| xport_to_str(dxport)); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| static int gport_rmnet_disconnect(struct f_rmnet *dev) |
| { |
| unsigned port_num; |
| enum transport_type cxport = rmnet_ports[dev->port_num].ctrl_xport; |
| enum transport_type dxport = rmnet_ports[dev->port_num].data_xport; |
| |
| pr_debug("%s: ctrl xport: %s data xport: %s dev: %p portno: %d\n", |
| __func__, xport_to_str(cxport), xport_to_str(dxport), |
| dev, dev->port_num); |
| |
| port_num = rmnet_ports[dev->port_num].ctrl_xport_num; |
| switch (cxport) { |
| case USB_GADGET_XPORT_SMD: |
| gsmd_ctrl_disconnect(&dev->port, port_num); |
| break; |
| case USB_GADGET_XPORT_HSIC: |
| ghsic_ctrl_disconnect(&dev->port, port_num); |
| break; |
| case USB_GADGET_XPORT_NONE: |
| break; |
| default: |
| pr_err("%s: Un-supported transport: %s\n", __func__, |
| xport_to_str(cxport)); |
| return -ENODEV; |
| } |
| |
| port_num = rmnet_ports[dev->port_num].data_xport_num; |
| switch (dxport) { |
| case USB_GADGET_XPORT_BAM: |
| case USB_GADGET_XPORT_BAM2BAM: |
| gbam_disconnect(&dev->port, port_num, dxport); |
| break; |
| case USB_GADGET_XPORT_HSIC: |
| ghsic_data_disconnect(&dev->port, port_num); |
| break; |
| case USB_GADGET_XPORT_NONE: |
| break; |
| default: |
| pr_err("%s: Un-supported transport: %s\n", __func__, |
| xport_to_str(dxport)); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| static void frmnet_unbind(struct usb_configuration *c, struct usb_function *f) |
| { |
| struct f_rmnet *dev = func_to_rmnet(f); |
| |
| pr_debug("%s: portno:%d\n", __func__, dev->port_num); |
| |
| if (gadget_is_dualspeed(c->cdev->gadget)) |
| usb_free_descriptors(f->hs_descriptors); |
| usb_free_descriptors(f->descriptors); |
| |
| frmnet_free_req(dev->notify, dev->notify_req); |
| |
| kfree(f->name); |
| } |
| |
| static void frmnet_suspend(struct usb_function *f) |
| { |
| struct f_rmnet *dev = func_to_rmnet(f); |
| unsigned port_num; |
| |
| if (!atomic_read(&dev->online)) |
| return; |
| /* This is a workaround for a bug in Windows 7/XP hosts in which |
| * the DTR bit is not set low when going into suspend. Hence force it |
| * low here when this function driver is suspended. |
| */ |
| if (dev->port.notify_modem) { |
| port_num = rmnet_ports[dev->port_num].ctrl_xport_num; |
| dev->port.notify_modem(&dev->port, port_num, ~ACM_CTRL_DTR); |
| } |
| } |
| |
| static void frmnet_disable(struct usb_function *f) |
| { |
| struct f_rmnet *dev = func_to_rmnet(f); |
| unsigned long flags; |
| struct rmnet_ctrl_pkt *cpkt; |
| |
| pr_debug("%s: port#%d\n", __func__, dev->port_num); |
| |
| usb_ep_disable(dev->notify); |
| dev->notify->driver_data = NULL; |
| |
| atomic_set(&dev->online, 0); |
| |
| spin_lock_irqsave(&dev->lock, flags); |
| while (!list_empty(&dev->cpkt_resp_q)) { |
| cpkt = list_first_entry(&dev->cpkt_resp_q, |
| struct rmnet_ctrl_pkt, list); |
| |
| list_del(&cpkt->list); |
| rmnet_free_ctrl_pkt(cpkt); |
| } |
| atomic_set(&dev->notify_count, 0); |
| spin_unlock_irqrestore(&dev->lock, flags); |
| |
| gport_rmnet_disconnect(dev); |
| } |
| |
| static int |
| frmnet_set_alt(struct usb_function *f, unsigned intf, unsigned alt) |
| { |
| struct f_rmnet *dev = func_to_rmnet(f); |
| struct usb_composite_dev *cdev = dev->cdev; |
| int ret; |
| |
| pr_debug("%s:dev:%p port#%d\n", __func__, dev, dev->port_num); |
| |
| if (dev->notify->driver_data) { |
| pr_debug("%s: reset port:%d\n", __func__, dev->port_num); |
| usb_ep_disable(dev->notify); |
| } |
| dev->notify_desc = ep_choose(cdev->gadget, |
| dev->hs.notify, |
| dev->fs.notify); |
| ret = usb_ep_enable(dev->notify, dev->notify_desc); |
| if (ret) { |
| pr_err("%s: usb ep#%s enable failed, err#%d\n", |
| __func__, dev->notify->name, ret); |
| return ret; |
| } |
| dev->notify->driver_data = dev; |
| |
| if (dev->port.in->driver_data) { |
| pr_debug("%s: reset port:%d\n", __func__, dev->port_num); |
| gport_rmnet_disconnect(dev); |
| } |
| |
| dev->port.in_desc = ep_choose(cdev->gadget, |
| dev->hs.in, dev->fs.in); |
| dev->port.out_desc = ep_choose(cdev->gadget, |
| dev->hs.out, dev->fs.out); |
| |
| ret = gport_rmnet_connect(dev); |
| |
| atomic_set(&dev->online, 1); |
| |
| return ret; |
| } |
| |
| static void frmnet_ctrl_response_available(struct f_rmnet *dev) |
| { |
| struct usb_request *req = dev->notify_req; |
| struct usb_cdc_notification *event; |
| unsigned long flags; |
| int ret; |
| |
| pr_debug("%s:dev:%p portno#%d\n", __func__, dev, dev->port_num); |
| |
| spin_lock_irqsave(&dev->lock, flags); |
| if (!atomic_read(&dev->online) || !req || !req->buf) { |
| spin_unlock_irqrestore(&dev->lock, flags); |
| return; |
| } |
| |
| if (atomic_inc_return(&dev->notify_count) != 1) { |
| spin_unlock_irqrestore(&dev->lock, flags); |
| return; |
| } |
| |
| event = req->buf; |
| event->bmRequestType = USB_DIR_IN | USB_TYPE_CLASS |
| | USB_RECIP_INTERFACE; |
| event->bNotificationType = USB_CDC_NOTIFY_RESPONSE_AVAILABLE; |
| event->wValue = cpu_to_le16(0); |
| event->wIndex = cpu_to_le16(dev->ifc_id); |
| event->wLength = cpu_to_le16(0); |
| spin_unlock_irqrestore(&dev->lock, flags); |
| |
| ret = usb_ep_queue(dev->notify, dev->notify_req, GFP_ATOMIC); |
| if (ret) { |
| atomic_dec(&dev->notify_count); |
| pr_debug("ep enqueue error %d\n", ret); |
| } |
| } |
| |
| static void frmnet_connect(struct grmnet *gr) |
| { |
| struct f_rmnet *dev; |
| |
| if (!gr) { |
| pr_err("%s: Invalid grmnet:%p\n", __func__, gr); |
| return; |
| } |
| |
| dev = port_to_rmnet(gr); |
| |
| atomic_set(&dev->ctrl_online, 1); |
| } |
| |
| static void frmnet_disconnect(struct grmnet *gr) |
| { |
| struct f_rmnet *dev; |
| unsigned long flags; |
| struct usb_cdc_notification *event; |
| int status; |
| struct rmnet_ctrl_pkt *cpkt; |
| |
| if (!gr) { |
| pr_err("%s: Invalid grmnet:%p\n", __func__, gr); |
| return; |
| } |
| |
| dev = port_to_rmnet(gr); |
| |
| atomic_set(&dev->ctrl_online, 0); |
| |
| if (!atomic_read(&dev->online)) { |
| pr_debug("%s: nothing to do\n", __func__); |
| return; |
| } |
| |
| usb_ep_fifo_flush(dev->notify); |
| |
| event = dev->notify_req->buf; |
| event->bmRequestType = USB_DIR_IN | USB_TYPE_CLASS |
| | USB_RECIP_INTERFACE; |
| event->bNotificationType = USB_CDC_NOTIFY_NETWORK_CONNECTION; |
| event->wValue = cpu_to_le16(0); |
| event->wIndex = cpu_to_le16(dev->ifc_id); |
| event->wLength = cpu_to_le16(0); |
| |
| status = usb_ep_queue(dev->notify, dev->notify_req, GFP_ATOMIC); |
| if (status < 0) { |
| if (!atomic_read(&dev->online)) |
| return; |
| pr_err("%s: rmnet notify ep enqueue error %d\n", |
| __func__, status); |
| } |
| |
| spin_lock_irqsave(&dev->lock, flags); |
| while (!list_empty(&dev->cpkt_resp_q)) { |
| cpkt = list_first_entry(&dev->cpkt_resp_q, |
| struct rmnet_ctrl_pkt, list); |
| |
| list_del(&cpkt->list); |
| rmnet_free_ctrl_pkt(cpkt); |
| } |
| atomic_set(&dev->notify_count, 0); |
| spin_unlock_irqrestore(&dev->lock, flags); |
| |
| } |
| |
| static int |
| frmnet_send_cpkt_response(void *gr, void *buf, size_t len) |
| { |
| struct f_rmnet *dev; |
| struct rmnet_ctrl_pkt *cpkt; |
| unsigned long flags; |
| |
| if (!gr || !buf) { |
| pr_err("%s: Invalid grmnet/buf, grmnet:%p buf:%p\n", |
| __func__, gr, buf); |
| return -ENODEV; |
| } |
| cpkt = rmnet_alloc_ctrl_pkt(len, GFP_ATOMIC); |
| if (IS_ERR(cpkt)) { |
| pr_err("%s: Unable to allocate ctrl pkt\n", __func__); |
| return -ENOMEM; |
| } |
| memcpy(cpkt->buf, buf, len); |
| cpkt->len = len; |
| |
| dev = port_to_rmnet(gr); |
| |
| pr_debug("%s: dev:%p port#%d\n", __func__, dev, dev->port_num); |
| |
| if (!atomic_read(&dev->online) || !atomic_read(&dev->ctrl_online)) { |
| rmnet_free_ctrl_pkt(cpkt); |
| return 0; |
| } |
| |
| spin_lock_irqsave(&dev->lock, flags); |
| list_add_tail(&cpkt->list, &dev->cpkt_resp_q); |
| spin_unlock_irqrestore(&dev->lock, flags); |
| |
| frmnet_ctrl_response_available(dev); |
| |
| return 0; |
| } |
| |
| static void |
| frmnet_cmd_complete(struct usb_ep *ep, struct usb_request *req) |
| { |
| struct f_rmnet *dev = req->context; |
| struct usb_composite_dev *cdev; |
| unsigned port_num; |
| |
| if (!dev) { |
| pr_err("%s: rmnet dev is null\n", __func__); |
| return; |
| } |
| |
| pr_debug("%s: dev:%p port#%d\n", __func__, dev, dev->port_num); |
| |
| cdev = dev->cdev; |
| |
| if (dev->port.send_encap_cmd) { |
| port_num = rmnet_ports[dev->port_num].ctrl_xport_num; |
| dev->port.send_encap_cmd(port_num, req->buf, req->actual); |
| } |
| } |
| |
| static void frmnet_notify_complete(struct usb_ep *ep, struct usb_request *req) |
| { |
| struct f_rmnet *dev = req->context; |
| int status = req->status; |
| |
| pr_debug("%s: dev:%p port#%d\n", __func__, dev, dev->port_num); |
| |
| switch (status) { |
| case -ECONNRESET: |
| case -ESHUTDOWN: |
| /* connection gone */ |
| atomic_set(&dev->notify_count, 0); |
| break; |
| default: |
| pr_err("rmnet notify ep error %d\n", status); |
| /* FALLTHROUGH */ |
| case 0: |
| if (!atomic_read(&dev->ctrl_online)) |
| break; |
| |
| if (atomic_dec_and_test(&dev->notify_count)) |
| break; |
| |
| status = usb_ep_queue(dev->notify, req, GFP_ATOMIC); |
| if (status) { |
| atomic_dec(&dev->notify_count); |
| pr_debug("ep enqueue error %d\n", status); |
| } |
| break; |
| } |
| } |
| |
| static int |
| frmnet_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl) |
| { |
| struct f_rmnet *dev = func_to_rmnet(f); |
| struct usb_composite_dev *cdev = dev->cdev; |
| struct usb_request *req = cdev->req; |
| unsigned port_num; |
| u16 w_index = le16_to_cpu(ctrl->wIndex); |
| u16 w_value = le16_to_cpu(ctrl->wValue); |
| u16 w_length = le16_to_cpu(ctrl->wLength); |
| int ret = -EOPNOTSUPP; |
| |
| pr_debug("%s:dev:%p port#%d\n", __func__, dev, dev->port_num); |
| |
| if (!atomic_read(&dev->online)) { |
| pr_debug("%s: usb cable is not connected\n", __func__); |
| return -ENOTCONN; |
| } |
| |
| switch ((ctrl->bRequestType << 8) | ctrl->bRequest) { |
| |
| case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8) |
| | USB_CDC_SEND_ENCAPSULATED_COMMAND: |
| ret = w_length; |
| req->complete = frmnet_cmd_complete; |
| req->context = dev; |
| break; |
| |
| |
| case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8) |
| | USB_CDC_GET_ENCAPSULATED_RESPONSE: |
| if (w_value) |
| goto invalid; |
| else { |
| unsigned len; |
| struct rmnet_ctrl_pkt *cpkt; |
| |
| spin_lock(&dev->lock); |
| if (list_empty(&dev->cpkt_resp_q)) { |
| pr_err("ctrl resp queue empty " |
| " req%02x.%02x v%04x i%04x l%d\n", |
| ctrl->bRequestType, ctrl->bRequest, |
| w_value, w_index, w_length); |
| spin_unlock(&dev->lock); |
| goto invalid; |
| } |
| |
| cpkt = list_first_entry(&dev->cpkt_resp_q, |
| struct rmnet_ctrl_pkt, list); |
| list_del(&cpkt->list); |
| spin_unlock(&dev->lock); |
| |
| len = min_t(unsigned, w_length, cpkt->len); |
| memcpy(req->buf, cpkt->buf, len); |
| ret = len; |
| |
| rmnet_free_ctrl_pkt(cpkt); |
| } |
| break; |
| case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8) |
| | USB_CDC_REQ_SET_CONTROL_LINE_STATE: |
| if (dev->port.notify_modem) { |
| port_num = rmnet_ports[dev->port_num].ctrl_xport_num; |
| dev->port.notify_modem(&dev->port, port_num, w_value); |
| } |
| ret = 0; |
| |
| break; |
| default: |
| |
| invalid: |
| DBG(cdev, "invalid control req%02x.%02x v%04x i%04x l%d\n", |
| ctrl->bRequestType, ctrl->bRequest, |
| w_value, w_index, w_length); |
| } |
| |
| /* respond with data transfer or status phase? */ |
| if (ret >= 0) { |
| VDBG(cdev, "rmnet req%02x.%02x v%04x i%04x l%d\n", |
| ctrl->bRequestType, ctrl->bRequest, |
| w_value, w_index, w_length); |
| req->zero = (ret < w_length); |
| req->length = ret; |
| ret = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC); |
| if (ret < 0) |
| ERROR(cdev, "rmnet ep0 enqueue err %d\n", ret); |
| } |
| |
| return ret; |
| } |
| |
| static int frmnet_bind(struct usb_configuration *c, struct usb_function *f) |
| { |
| struct f_rmnet *dev = func_to_rmnet(f); |
| struct usb_ep *ep; |
| struct usb_composite_dev *cdev = c->cdev; |
| int ret = -ENODEV; |
| |
| dev->ifc_id = usb_interface_id(c, f); |
| if (dev->ifc_id < 0) { |
| pr_err("%s: unable to allocate ifc id, err:%d", |
| __func__, dev->ifc_id); |
| return dev->ifc_id; |
| } |
| rmnet_interface_desc.bInterfaceNumber = dev->ifc_id; |
| |
| ep = usb_ep_autoconfig(cdev->gadget, &rmnet_fs_in_desc); |
| if (!ep) { |
| pr_err("%s: usb epin autoconfig failed\n", __func__); |
| return -ENODEV; |
| } |
| dev->port.in = ep; |
| ep->driver_data = cdev; |
| |
| ep = usb_ep_autoconfig(cdev->gadget, &rmnet_fs_out_desc); |
| if (!ep) { |
| pr_err("%s: usb epout autoconfig failed\n", __func__); |
| ret = -ENODEV; |
| goto ep_auto_out_fail; |
| } |
| dev->port.out = ep; |
| ep->driver_data = cdev; |
| |
| ep = usb_ep_autoconfig(cdev->gadget, &rmnet_fs_notify_desc); |
| if (!ep) { |
| pr_err("%s: usb epnotify autoconfig failed\n", __func__); |
| ret = -ENODEV; |
| goto ep_auto_notify_fail; |
| } |
| dev->notify = ep; |
| ep->driver_data = cdev; |
| |
| dev->notify_req = frmnet_alloc_req(ep, |
| sizeof(struct usb_cdc_notification), |
| GFP_KERNEL); |
| if (IS_ERR(dev->notify_req)) { |
| pr_err("%s: unable to allocate memory for notify req\n", |
| __func__); |
| ret = -ENOMEM; |
| goto ep_notify_alloc_fail; |
| } |
| |
| dev->notify_req->complete = frmnet_notify_complete; |
| dev->notify_req->context = dev; |
| |
| f->descriptors = usb_copy_descriptors(rmnet_fs_function); |
| |
| if (!f->descriptors) |
| goto fail; |
| |
| dev->fs.in = usb_find_endpoint(rmnet_fs_function, |
| f->descriptors, |
| &rmnet_fs_in_desc); |
| dev->fs.out = usb_find_endpoint(rmnet_fs_function, |
| f->descriptors, |
| &rmnet_fs_out_desc); |
| dev->fs.notify = usb_find_endpoint(rmnet_fs_function, |
| f->descriptors, |
| &rmnet_fs_notify_desc); |
| |
| if (gadget_is_dualspeed(cdev->gadget)) { |
| rmnet_hs_in_desc.bEndpointAddress = |
| rmnet_fs_in_desc.bEndpointAddress; |
| rmnet_hs_out_desc.bEndpointAddress = |
| rmnet_fs_out_desc.bEndpointAddress; |
| rmnet_hs_notify_desc.bEndpointAddress = |
| rmnet_fs_notify_desc.bEndpointAddress; |
| |
| /* copy descriptors, and track endpoint copies */ |
| f->hs_descriptors = usb_copy_descriptors(rmnet_hs_function); |
| |
| if (!f->hs_descriptors) |
| goto fail; |
| |
| dev->hs.in = usb_find_endpoint(rmnet_hs_function, |
| f->hs_descriptors, &rmnet_hs_in_desc); |
| dev->hs.out = usb_find_endpoint(rmnet_hs_function, |
| f->hs_descriptors, &rmnet_hs_out_desc); |
| dev->hs.notify = usb_find_endpoint(rmnet_hs_function, |
| f->hs_descriptors, &rmnet_hs_notify_desc); |
| } |
| |
| pr_info("%s: RmNet(%d) %s Speed, IN:%s OUT:%s\n", |
| __func__, dev->port_num, |
| gadget_is_dualspeed(cdev->gadget) ? "dual" : "full", |
| dev->port.in->name, dev->port.out->name); |
| |
| return 0; |
| |
| fail: |
| if (f->descriptors) |
| usb_free_descriptors(f->descriptors); |
| ep_notify_alloc_fail: |
| dev->notify->driver_data = NULL; |
| dev->notify = NULL; |
| ep_auto_notify_fail: |
| dev->port.out->driver_data = NULL; |
| dev->port.out = NULL; |
| ep_auto_out_fail: |
| dev->port.in->driver_data = NULL; |
| dev->port.in = NULL; |
| |
| return ret; |
| } |
| |
| static int frmnet_bind_config(struct usb_configuration *c, unsigned portno) |
| { |
| int status; |
| struct f_rmnet *dev; |
| struct usb_function *f; |
| unsigned long flags; |
| |
| pr_debug("%s: usb config:%p\n", __func__, c); |
| |
| if (portno >= nr_rmnet_ports) { |
| pr_err("%s: supporting ports#%u port_id:%u", __func__, |
| nr_rmnet_ports, portno); |
| return -ENODEV; |
| } |
| |
| if (rmnet_string_defs[0].id == 0) { |
| status = usb_string_id(c->cdev); |
| if (status < 0) { |
| pr_err("%s: failed to get string id, err:%d\n", |
| __func__, status); |
| return status; |
| } |
| rmnet_string_defs[0].id = status; |
| } |
| |
| dev = rmnet_ports[portno].port; |
| |
| spin_lock_irqsave(&dev->lock, flags); |
| dev->cdev = c->cdev; |
| f = &dev->port.func; |
| f->name = kasprintf(GFP_ATOMIC, "rmnet%d", portno); |
| spin_unlock_irqrestore(&dev->lock, flags); |
| if (!f->name) { |
| pr_err("%s: cannot allocate memory for name\n", __func__); |
| return -ENOMEM; |
| } |
| |
| f->strings = rmnet_strings; |
| f->bind = frmnet_bind; |
| f->unbind = frmnet_unbind; |
| f->disable = frmnet_disable; |
| f->set_alt = frmnet_set_alt; |
| f->setup = frmnet_setup; |
| f->suspend = frmnet_suspend; |
| dev->port.send_cpkt_response = frmnet_send_cpkt_response; |
| dev->port.disconnect = frmnet_disconnect; |
| dev->port.connect = frmnet_connect; |
| |
| status = usb_add_function(c, f); |
| if (status) { |
| pr_err("%s: usb add function failed: %d\n", |
| __func__, status); |
| kfree(f->name); |
| return status; |
| } |
| |
| pr_debug("%s: complete\n", __func__); |
| |
| return status; |
| } |
| |
| static void frmnet_cleanup(void) |
| { |
| int i; |
| |
| for (i = 0; i < nr_rmnet_ports; i++) |
| kfree(rmnet_ports[i].port); |
| |
| nr_rmnet_ports = 0; |
| no_ctrl_smd_ports = 0; |
| no_data_bam_ports = 0; |
| no_data_bam2bam_ports = 0; |
| no_ctrl_hsic_ports = 0; |
| no_data_hsic_ports = 0; |
| } |
| |
| static int frmnet_init_port(const char *ctrl_name, const char *data_name) |
| { |
| struct f_rmnet *dev; |
| struct rmnet_ports *rmnet_port; |
| int ret; |
| int i; |
| |
| if (nr_rmnet_ports >= NR_RMNET_PORTS) { |
| pr_err("%s: Max-%d instances supported\n", |
| __func__, NR_RMNET_PORTS); |
| return -EINVAL; |
| } |
| |
| pr_debug("%s: port#:%d, ctrl port: %s data port: %s\n", |
| __func__, nr_rmnet_ports, ctrl_name, data_name); |
| |
| dev = kzalloc(sizeof(struct f_rmnet), GFP_KERNEL); |
| if (!dev) { |
| pr_err("%s: Unable to allocate rmnet device\n", __func__); |
| return -ENOMEM; |
| } |
| |
| dev->port_num = nr_rmnet_ports; |
| spin_lock_init(&dev->lock); |
| INIT_LIST_HEAD(&dev->cpkt_resp_q); |
| |
| rmnet_port = &rmnet_ports[nr_rmnet_ports]; |
| rmnet_port->port = dev; |
| rmnet_port->port_num = nr_rmnet_ports; |
| rmnet_port->ctrl_xport = str_to_xport(ctrl_name); |
| rmnet_port->data_xport = str_to_xport(data_name); |
| |
| switch (rmnet_port->ctrl_xport) { |
| case USB_GADGET_XPORT_SMD: |
| rmnet_port->ctrl_xport_num = no_ctrl_smd_ports; |
| no_ctrl_smd_ports++; |
| break; |
| case USB_GADGET_XPORT_HSIC: |
| rmnet_port->ctrl_xport_num = no_ctrl_hsic_ports; |
| no_ctrl_hsic_ports++; |
| break; |
| case USB_GADGET_XPORT_NONE: |
| break; |
| default: |
| pr_err("%s: Un-supported transport: %u\n", __func__, |
| rmnet_port->ctrl_xport); |
| ret = -ENODEV; |
| goto fail_probe; |
| } |
| |
| switch (rmnet_port->data_xport) { |
| case USB_GADGET_XPORT_BAM: |
| rmnet_port->data_xport_num = no_data_bam_ports; |
| no_data_bam_ports++; |
| break; |
| case USB_GADGET_XPORT_BAM2BAM: |
| rmnet_port->data_xport_num = no_data_bam2bam_ports; |
| no_data_bam2bam_ports++; |
| break; |
| case USB_GADGET_XPORT_HSIC: |
| rmnet_port->data_xport_num = no_data_hsic_ports; |
| no_data_hsic_ports++; |
| break; |
| case USB_GADGET_XPORT_NONE: |
| break; |
| default: |
| pr_err("%s: Un-supported transport: %u\n", __func__, |
| rmnet_port->data_xport); |
| ret = -ENODEV; |
| goto fail_probe; |
| } |
| nr_rmnet_ports++; |
| |
| return 0; |
| |
| fail_probe: |
| for (i = 0; i < nr_rmnet_ports; i++) |
| kfree(rmnet_ports[i].port); |
| |
| nr_rmnet_ports = 0; |
| no_ctrl_smd_ports = 0; |
| no_data_bam_ports = 0; |
| no_ctrl_hsic_ports = 0; |
| no_data_hsic_ports = 0; |
| |
| return ret; |
| } |