blob: 9281da7d91bd193c221e1f7ba7fc422ff3880dcd [file] [log] [blame]
Len Brown6dccf9c2011-07-12 22:29:32 -04001/*
2 * mrst/pmu.c - driver for MRST Power Management Unit
3 *
4 * Copyright (c) 2011, Intel Corporation.
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms and conditions of the GNU General Public License,
8 * version 2, as published by the Free Software Foundation.
9 *
10 * This program is distributed in the hope it will be useful, but WITHOUT
11 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
13 * more details.
14 *
15 * You should have received a copy of the GNU General Public License along with
16 * this program; if not, write to the Free Software Foundation, Inc.,
17 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
18 */
19
20#include <linux/cpuidle.h>
21#include <linux/debugfs.h>
22#include <linux/delay.h>
23#include <linux/interrupt.h>
24#include <linux/module.h>
25#include <linux/pci.h>
26#include <linux/seq_file.h>
27#include <linux/sfi.h>
28#include <asm/intel_scu_ipc.h>
29#include "pmu.h"
30
31#define IPCMSG_FW_REVISION 0xF4
32
33struct mrst_device {
34 u16 pci_dev_num; /* DEBUG only */
35 u16 lss;
36 u16 latest_request;
37 unsigned int pci_state_counts[PCI_D3cold + 1]; /* DEBUG only */
38};
39
40/*
41 * comlete list of MRST PCI devices
42 */
43static struct mrst_device mrst_devs[] = {
44/* 0 */ { 0x0800, LSS_SPI0 }, /* Moorestown SPI Ctrl 0 */
45/* 1 */ { 0x0801, LSS_SPI1 }, /* Moorestown SPI Ctrl 1 */
46/* 2 */ { 0x0802, LSS_I2C0 }, /* Moorestown I2C 0 */
47/* 3 */ { 0x0803, LSS_I2C1 }, /* Moorestown I2C 1 */
48/* 4 */ { 0x0804, LSS_I2C2 }, /* Moorestown I2C 2 */
49/* 5 */ { 0x0805, LSS_KBD }, /* Moorestown Keyboard Ctrl */
50/* 6 */ { 0x0806, LSS_USB_HC }, /* Moorestown USB Ctrl */
51/* 7 */ { 0x0807, LSS_SD_HC0 }, /* Moorestown SD Host Ctrl 0 */
52/* 8 */ { 0x0808, LSS_SD_HC1 }, /* Moorestown SD Host Ctrl 1 */
53/* 9 */ { 0x0809, LSS_NAND }, /* Moorestown NAND Ctrl */
54/* 10 */ { 0x080a, LSS_AUDIO }, /* Moorestown Audio Ctrl */
55/* 11 */ { 0x080b, LSS_IMAGING }, /* Moorestown ISP */
56/* 12 */ { 0x080c, LSS_SECURITY }, /* Moorestown Security Controller */
57/* 13 */ { 0x080d, LSS_DISPLAY }, /* Moorestown External Displays */
58/* 14 */ { 0x080e, 0 }, /* Moorestown SCU IPC */
59/* 15 */ { 0x080f, LSS_GPIO }, /* Moorestown GPIO Controller */
60/* 16 */ { 0x0810, 0 }, /* Moorestown Power Management Unit */
61/* 17 */ { 0x0811, LSS_USB_OTG }, /* Moorestown OTG Ctrl */
62/* 18 */ { 0x0812, LSS_SPI2 }, /* Moorestown SPI Ctrl 2 */
63/* 19 */ { 0x0813, 0 }, /* Moorestown SC DMA */
64/* 20 */ { 0x0814, LSS_AUDIO_LPE }, /* Moorestown LPE DMA */
65/* 21 */ { 0x0815, LSS_AUDIO_SSP }, /* Moorestown SSP0 */
66
67/* 22 */ { 0x084F, LSS_SD_HC2 }, /* Moorestown SD Host Ctrl 2 */
68
69/* 23 */ { 0x4102, 0 }, /* Lincroft */
70/* 24 */ { 0x4110, 0 }, /* Lincroft */
71};
72
73/* n.b. We ignore PCI-id 0x815 in LSS9 b/c MeeGo has no driver for it */
74static u16 mrst_lss9_pci_ids[] = {0x080a, 0x0814, 0};
75static u16 mrst_lss10_pci_ids[] = {0x0800, 0x0801, 0x0802, 0x0803,
76 0x0804, 0x0805, 0x080f, 0};
77
78/* handle concurrent SMP invokations of pmu_pci_set_power_state() */
79static spinlock_t mrst_pmu_power_state_lock;
80
81static unsigned int wake_counters[MRST_NUM_LSS]; /* DEBUG only */
82static unsigned int pmu_irq_stats[INT_INVALID + 1]; /* DEBUG only */
83
84static int graphics_is_off;
85static int lss_s0i3_enabled;
86static bool mrst_pmu_s0i3_enable;
87
88/* debug counters */
89static u32 pmu_wait_ready_calls;
90static u32 pmu_wait_ready_udelays;
91static u32 pmu_wait_ready_udelays_max;
92static u32 pmu_wait_done_calls;
93static u32 pmu_wait_done_udelays;
94static u32 pmu_wait_done_udelays_max;
95static u32 pmu_set_power_state_entry;
96static u32 pmu_set_power_state_send_cmd;
97
98static struct mrst_device *pci_id_2_mrst_dev(u16 pci_dev_num)
99{
100 int index = 0;
101
102 if ((pci_dev_num >= 0x0800) && (pci_dev_num <= 0x815))
103 index = pci_dev_num - 0x800;
104 else if (pci_dev_num == 0x084F)
105 index = 22;
106 else if (pci_dev_num == 0x4102)
107 index = 23;
108 else if (pci_dev_num == 0x4110)
109 index = 24;
110
111 if (pci_dev_num != mrst_devs[index].pci_dev_num) {
112 WARN_ONCE(1, FW_BUG "Unknown PCI device 0x%04X\n", pci_dev_num);
113 return 0;
114 }
115
116 return &mrst_devs[index];
117}
118
119/**
120 * mrst_pmu_validate_cstates
121 * @dev: cpuidle_device
122 *
123 * Certain states are not appropriate for governor to pick in some cases.
124 * This function will be called as cpuidle_device's prepare callback and
125 * thus tells governor to ignore such states when selecting the next state
126 * to enter.
127 */
128
129#define IDLE_STATE4_IS_C6 4
130#define IDLE_STATE5_IS_S0I3 5
131
132int mrst_pmu_invalid_cstates(void)
133{
134 int cpu = smp_processor_id();
135
136 /*
137 * Demote to C4 if the PMU is busy.
138 * Since LSS changes leave the busy bit clear...
139 * busy means either the PMU is waiting for an ACK-C6 that
140 * isn't coming due to an MWAIT that returned immediately;
141 * or we returned from S0i3 successfully, and the PMU
142 * is not done sending us interrupts.
143 */
144 if (pmu_read_busy_status())
145 return 1 << IDLE_STATE4_IS_C6 | 1 << IDLE_STATE5_IS_S0I3;
146
147 /*
148 * Disallow S0i3 if: PMU is not initialized, or CPU1 is active,
149 * or if device LSS is insufficient, or the GPU is active,
150 * or if it has been explicitly disabled.
151 */
152 if (!pmu_reg || !cpumask_equal(cpu_online_mask, cpumask_of(cpu)) ||
153 !lss_s0i3_enabled || !graphics_is_off || !mrst_pmu_s0i3_enable)
154 return 1 << IDLE_STATE5_IS_S0I3;
155 else
156 return 0;
157}
158
159/*
160 * pmu_update_wake_counters(): read PM_WKS, update wake_counters[]
161 * DEBUG only.
162 */
163static void pmu_update_wake_counters(void)
164{
165 int lss;
166 u32 wake_status;
167
168 wake_status = pmu_read_wks();
169
170 for (lss = 0; lss < MRST_NUM_LSS; ++lss) {
171 if (wake_status & (1 << lss))
172 wake_counters[lss]++;
173 }
174}
175
176int mrst_pmu_s0i3_entry(void)
177{
178 int status;
179
180 /* Clear any possible error conditions */
181 pmu_write_ics(0x300);
182
183 /* set wake control to current D-states */
184 pmu_write_wssc(S0I3_SSS_TARGET);
185
186 status = mrst_s0i3_entry(PM_S0I3_COMMAND, &pmu_reg->pm_cmd);
187 pmu_update_wake_counters();
188 return status;
189}
190
191/* poll for maximum of 5ms for busy bit to clear */
192static int pmu_wait_ready(void)
193{
194 int udelays;
195
196 pmu_wait_ready_calls++;
197
198 for (udelays = 0; udelays < 500; ++udelays) {
199 if (udelays > pmu_wait_ready_udelays_max)
200 pmu_wait_ready_udelays_max = udelays;
201
202 if (pmu_read_busy_status() == 0)
203 return 0;
204
205 udelay(10);
206 pmu_wait_ready_udelays++;
207 }
208
209 /*
210 * if this fires, observe
211 * /sys/kernel/debug/mrst_pmu_wait_ready_calls
212 * /sys/kernel/debug/mrst_pmu_wait_ready_udelays
213 */
214 WARN_ONCE(1, "SCU not ready for 5ms");
215 return -EBUSY;
216}
217/* poll for maximum of 50ms us for busy bit to clear */
218static int pmu_wait_done(void)
219{
220 int udelays;
221
222 pmu_wait_done_calls++;
223
224 for (udelays = 0; udelays < 500; ++udelays) {
225 if (udelays > pmu_wait_done_udelays_max)
226 pmu_wait_done_udelays_max = udelays;
227
228 if (pmu_read_busy_status() == 0)
229 return 0;
230
231 udelay(100);
232 pmu_wait_done_udelays++;
233 }
234
235 /*
236 * if this fires, observe
237 * /sys/kernel/debug/mrst_pmu_wait_done_calls
238 * /sys/kernel/debug/mrst_pmu_wait_done_udelays
239 */
240 WARN_ONCE(1, "SCU not done for 50ms");
241 return -EBUSY;
242}
243
244u32 mrst_pmu_msi_is_disabled(void)
245{
246 return pmu_msi_is_disabled();
247}
248
249void mrst_pmu_enable_msi(void)
250{
251 pmu_msi_enable();
252}
253
254/**
255 * pmu_irq - pmu driver interrupt handler
256 * Context: interrupt context
257 */
258static irqreturn_t pmu_irq(int irq, void *dummy)
259{
260 union pmu_pm_ics pmu_ics;
261
262 pmu_ics.value = pmu_read_ics();
263
264 if (!pmu_ics.bits.pending)
265 return IRQ_NONE;
266
267 switch (pmu_ics.bits.cause) {
268 case INT_SPURIOUS:
269 case INT_CMD_DONE:
270 case INT_CMD_ERR:
271 case INT_WAKE_RX:
272 case INT_SS_ERROR:
273 case INT_S0IX_MISS:
274 case INT_NO_ACKC6:
275 pmu_irq_stats[pmu_ics.bits.cause]++;
276 break;
277 default:
278 pmu_irq_stats[INT_INVALID]++;
279 }
280
281 pmu_write_ics(pmu_ics.value); /* Clear pending interrupt */
282
283 return IRQ_HANDLED;
284}
285
286/*
287 * Translate PCI power management to MRST LSS D-states
288 */
289static int pci_2_mrst_state(int lss, pci_power_t pci_state)
290{
291 switch (pci_state) {
292 case PCI_D0:
293 if (SSMSK(D0i1, lss) & D0I1_ACG_SSS_TARGET)
294 return D0i1;
295 else
296 return D0;
297 case PCI_D1:
298 return D0i1;
299 case PCI_D2:
300 return D0i2;
301 case PCI_D3hot:
302 case PCI_D3cold:
303 return D0i3;
304 default:
305 WARN(1, "pci_state %d\n", pci_state);
306 return 0;
307 }
308}
309
310static int pmu_issue_command(u32 pm_ssc)
311{
312 union pmu_pm_set_cfg_cmd_t command;
313
314 if (pmu_read_busy_status()) {
315 pr_debug("pmu is busy, Operation not permitted\n");
316 return -1;
317 }
318
319 /*
320 * enable interrupts in PMU so that interrupts are
321 * propagated when ioc bit for a particular set
322 * command is set
323 */
324
325 pmu_irq_enable();
326
327 /* Configure the sub systems for pmu2 */
328
329 pmu_write_ssc(pm_ssc);
330
331 /*
332 * Send the set config command for pmu its configured
333 * for mode CM_IMMEDIATE & hence with No Trigger
334 */
335
336 command.pmu2_params.d_param.cfg_mode = CM_IMMEDIATE;
337 command.pmu2_params.d_param.cfg_delay = 0;
338 command.pmu2_params.d_param.rsvd = 0;
339
340 /* construct the command to send SET_CFG to particular PMU */
341 command.pmu2_params.d_param.cmd = SET_CFG_CMD;
342 command.pmu2_params.d_param.ioc = 0;
343 command.pmu2_params.d_param.mode_id = 0;
344 command.pmu2_params.d_param.sys_state = SYS_STATE_S0I0;
345
346 /* write the value of PM_CMD into particular PMU */
347 pr_debug("pmu command being written %x\n",
348 command.pmu_pm_set_cfg_cmd_value);
349
350 pmu_write_cmd(command.pmu_pm_set_cfg_cmd_value);
351
352 return 0;
353}
354
355static u16 pmu_min_lss_pci_req(u16 *ids, u16 pci_state)
356{
357 u16 existing_request;
358 int i;
359
360 for (i = 0; ids[i]; ++i) {
361 struct mrst_device *mrst_dev;
362
363 mrst_dev = pci_id_2_mrst_dev(ids[i]);
364 if (unlikely(!mrst_dev))
365 continue;
366
367 existing_request = mrst_dev->latest_request;
368 if (existing_request < pci_state)
369 pci_state = existing_request;
370 }
371 return pci_state;
372}
373
374/**
375 * pmu_pci_set_power_state - Callback function is used by all the PCI devices
376 * for a platform specific device power on/shutdown.
377 */
378
379int pmu_pci_set_power_state(struct pci_dev *pdev, pci_power_t pci_state)
380{
381 u32 old_sss, new_sss;
382 int status = 0;
383 struct mrst_device *mrst_dev;
384
385 pmu_set_power_state_entry++;
386
387 BUG_ON(pdev->vendor != PCI_VENDOR_ID_INTEL);
388 BUG_ON(pci_state < PCI_D0 || pci_state > PCI_D3cold);
389
390 mrst_dev = pci_id_2_mrst_dev(pdev->device);
391 if (unlikely(!mrst_dev))
392 return -ENODEV;
393
394 mrst_dev->pci_state_counts[pci_state]++; /* count invocations */
395
396 /* PMU driver calls self as part of PCI initialization, ignore */
397 if (pdev->device == PCI_DEV_ID_MRST_PMU)
398 return 0;
399
400 BUG_ON(!pmu_reg); /* SW bug if called before initialized */
401
402 spin_lock(&mrst_pmu_power_state_lock);
403
404 if (pdev->d3_delay) {
405 dev_dbg(&pdev->dev, "d3_delay %d, should be 0\n",
406 pdev->d3_delay);
407 pdev->d3_delay = 0;
408 }
409 /*
410 * If Lincroft graphics, simply remember state
411 */
412 if ((pdev->class >> 16) == PCI_BASE_CLASS_DISPLAY
413 && !((pdev->class & PCI_SUB_CLASS_MASK) >> 8)) {
414 if (pci_state == PCI_D0)
415 graphics_is_off = 0;
416 else
417 graphics_is_off = 1;
418 goto ret;
419 }
420
421 if (!mrst_dev->lss)
422 goto ret; /* device with no LSS */
423
424 if (mrst_dev->latest_request == pci_state)
425 goto ret; /* no change */
426
427 mrst_dev->latest_request = pci_state; /* record latest request */
428
429 /*
430 * LSS9 and LSS10 contain multiple PCI devices.
431 * Use the lowest numbered (highest power) state in the LSS
432 */
433 if (mrst_dev->lss == 9)
434 pci_state = pmu_min_lss_pci_req(mrst_lss9_pci_ids, pci_state);
435 else if (mrst_dev->lss == 10)
436 pci_state = pmu_min_lss_pci_req(mrst_lss10_pci_ids, pci_state);
437
438 status = pmu_wait_ready();
439 if (status)
440 goto ret;
441
442 old_sss = pmu_read_sss();
443 new_sss = old_sss & ~SSMSK(3, mrst_dev->lss);
444 new_sss |= SSMSK(pci_2_mrst_state(mrst_dev->lss, pci_state),
445 mrst_dev->lss);
446
447 if (new_sss == old_sss)
448 goto ret; /* nothing to do */
449
450 pmu_set_power_state_send_cmd++;
451
452 status = pmu_issue_command(new_sss);
453
454 if (unlikely(status != 0)) {
455 dev_err(&pdev->dev, "Failed to Issue a PM command\n");
456 goto ret;
457 }
458
459 if (pmu_wait_done())
460 goto ret;
461
462 lss_s0i3_enabled =
463 ((pmu_read_sss() & S0I3_SSS_TARGET) == S0I3_SSS_TARGET);
464ret:
465 spin_unlock(&mrst_pmu_power_state_lock);
466 return status;
467}
468
469#ifdef CONFIG_DEBUG_FS
470static char *d0ix_names[] = {"D0", "D0i1", "D0i2", "D0i3"};
471
472static inline const char *d0ix_name(int state)
473{
474 return d0ix_names[(int) state];
475}
476
477static int debug_mrst_pmu_show(struct seq_file *s, void *unused)
478{
479 struct pci_dev *pdev = NULL;
480 u32 cur_pmsss;
481 int lss;
482
483 seq_printf(s, "0x%08X D0I1_ACG_SSS_TARGET\n", D0I1_ACG_SSS_TARGET);
484
485 cur_pmsss = pmu_read_sss();
486
487 seq_printf(s, "0x%08X S0I3_SSS_TARGET\n", S0I3_SSS_TARGET);
488
489 seq_printf(s, "0x%08X Current SSS ", cur_pmsss);
490 seq_printf(s, lss_s0i3_enabled ? "\n" : "[BLOCKS s0i3]\n");
491
492 if (cpumask_equal(cpu_online_mask, cpumask_of(0)))
493 seq_printf(s, "cpu0 is only cpu online\n");
494 else
495 seq_printf(s, "cpu0 is NOT only cpu online [BLOCKS S0i3]\n");
496
497 seq_printf(s, "GFX: %s\n", graphics_is_off ? "" : "[BLOCKS s0i3]");
498
499
500 for_each_pci_dev(pdev) {
501 int pos;
502 u16 pmcsr;
503 struct mrst_device *mrst_dev;
504 int i;
505
506 mrst_dev = pci_id_2_mrst_dev(pdev->device);
507
508 seq_printf(s, "%s %04x/%04X %-16.16s ",
509 dev_name(&pdev->dev),
510 pdev->vendor, pdev->device,
511 dev_driver_string(&pdev->dev));
512
513 if (unlikely (!mrst_dev)) {
514 seq_printf(s, " UNKNOWN\n");
515 continue;
516 }
517
518 if (mrst_dev->lss)
519 seq_printf(s, "LSS %2d %-4s ", mrst_dev->lss,
520 d0ix_name(((cur_pmsss >>
521 (mrst_dev->lss * 2)) & 0x3)));
522 else
523 seq_printf(s, " ");
524
525 /* PCI PM config space setting */
526 pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
527 if (pos != 0) {
528 pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr);
529 seq_printf(s, "PCI-%-4s",
530 pci_power_name(pmcsr & PCI_PM_CTRL_STATE_MASK));
531 } else {
532 seq_printf(s, " ");
533 }
534
535 seq_printf(s, " %s ", pci_power_name(mrst_dev->latest_request));
536 for (i = 0; i <= PCI_D3cold; ++i)
537 seq_printf(s, "%d ", mrst_dev->pci_state_counts[i]);
538
539 if (mrst_dev->lss) {
540 unsigned int lssmask;
541
542 lssmask = SSMSK(D0i3, mrst_dev->lss);
543
544 if ((lssmask & S0I3_SSS_TARGET) &&
545 ((lssmask & cur_pmsss) !=
546 (lssmask & S0I3_SSS_TARGET)))
547 seq_printf(s , "[BLOCKS s0i3]");
548 }
549
550 seq_printf(s, "\n");
551 }
552 seq_printf(s, "Wake Counters:\n");
553 for (lss = 0; lss < MRST_NUM_LSS; ++lss)
554 seq_printf(s, "LSS%d %d\n", lss, wake_counters[lss]);
555
556 seq_printf(s, "Interrupt Counters:\n");
557 seq_printf(s,
558 "INT_SPURIOUS \t%8u\n" "INT_CMD_DONE \t%8u\n"
559 "INT_CMD_ERR \t%8u\n" "INT_WAKE_RX \t%8u\n"
560 "INT_SS_ERROR \t%8u\n" "INT_S0IX_MISS\t%8u\n"
561 "INT_NO_ACKC6 \t%8u\n" "INT_INVALID \t%8u\n",
562 pmu_irq_stats[INT_SPURIOUS], pmu_irq_stats[INT_CMD_DONE],
563 pmu_irq_stats[INT_CMD_ERR], pmu_irq_stats[INT_WAKE_RX],
564 pmu_irq_stats[INT_SS_ERROR], pmu_irq_stats[INT_S0IX_MISS],
565 pmu_irq_stats[INT_NO_ACKC6], pmu_irq_stats[INT_INVALID]);
566
567 seq_printf(s, "mrst_pmu_wait_ready_calls %8d\n",
568 pmu_wait_ready_calls);
569 seq_printf(s, "mrst_pmu_wait_ready_udelays %8d\n",
570 pmu_wait_ready_udelays);
571 seq_printf(s, "mrst_pmu_wait_ready_udelays_max %8d\n",
572 pmu_wait_ready_udelays_max);
573 seq_printf(s, "mrst_pmu_wait_done_calls %8d\n",
574 pmu_wait_done_calls);
575 seq_printf(s, "mrst_pmu_wait_done_udelays %8d\n",
576 pmu_wait_done_udelays);
577 seq_printf(s, "mrst_pmu_wait_done_udelays_max %8d\n",
578 pmu_wait_done_udelays_max);
579 seq_printf(s, "mrst_pmu_set_power_state_entry %8d\n",
580 pmu_set_power_state_entry);
581 seq_printf(s, "mrst_pmu_set_power_state_send_cmd %8d\n",
582 pmu_set_power_state_send_cmd);
583 seq_printf(s, "SCU busy: %d\n", pmu_read_busy_status());
584
585 return 0;
586}
587
588static int debug_mrst_pmu_open(struct inode *inode, struct file *file)
589{
590 return single_open(file, debug_mrst_pmu_show, NULL);
591}
592
593static const struct file_operations devices_state_operations = {
594 .open = debug_mrst_pmu_open,
595 .read = seq_read,
596 .llseek = seq_lseek,
597 .release = single_release,
598};
599#endif /* DEBUG_FS */
600
601/*
602 * Validate SCU PCI shim PCI vendor capability byte
603 * against LSS hard-coded in mrst_devs[] above.
604 * DEBUG only.
605 */
606static void pmu_scu_firmware_debug(void)
607{
608 struct pci_dev *pdev = NULL;
609
610 for_each_pci_dev(pdev) {
611 struct mrst_device *mrst_dev;
612 u8 pci_config_lss;
613 int pos;
614
615 mrst_dev = pci_id_2_mrst_dev(pdev->device);
616 if (unlikely(!mrst_dev)) {
617 printk(KERN_ERR FW_BUG "pmu: Unknown "
618 "PCI device 0x%04X\n", pdev->device);
619 continue;
620 }
621
622 if (mrst_dev->lss == 0)
623 continue; /* no LSS in our table */
624
625 pos = pci_find_capability(pdev, PCI_CAP_ID_VNDR);
626 if (!pos != 0) {
627 printk(KERN_ERR FW_BUG "pmu: 0x%04X "
628 "missing PCI Vendor Capability\n",
629 pdev->device);
630 continue;
631 }
632 pci_read_config_byte(pdev, pos + 4, &pci_config_lss);
633 if (!(pci_config_lss & PCI_VENDOR_CAP_LOG_SS_MASK)) {
634 printk(KERN_ERR FW_BUG "pmu: 0x%04X "
635 "invalid PCI Vendor Capability 0x%x "
636 " expected LSS 0x%X\n",
637 pdev->device, pci_config_lss, mrst_dev->lss);
638 continue;
639 }
640 pci_config_lss &= PCI_VENDOR_CAP_LOG_ID_MASK;
641
642 if (mrst_dev->lss == pci_config_lss)
643 continue;
644
645 printk(KERN_ERR FW_BUG "pmu: 0x%04X LSS = %d, expected %d\n",
646 pdev->device, pci_config_lss, mrst_dev->lss);
647 }
648}
649
650/**
651 * pmu_probe
652 */
653static int __devinit pmu_probe(struct pci_dev *pdev,
654 const struct pci_device_id *pci_id)
655{
656 int ret;
657 struct mrst_pmu_reg *pmu;
658
659 /* Init the device */
660 ret = pci_enable_device(pdev);
661 if (ret) {
662 dev_err(&pdev->dev, "Unable to Enable PCI device\n");
663 return ret;
664 }
665
666 ret = pci_request_regions(pdev, MRST_PMU_DRV_NAME);
667 if (ret < 0) {
668 dev_err(&pdev->dev, "Cannot obtain PCI resources, aborting\n");
669 goto out_err1;
670 }
671
672 /* Map the memory of PMU reg base */
673 pmu = pci_iomap(pdev, 0, 0);
674 if (!pmu) {
675 dev_err(&pdev->dev, "Unable to map the PMU address space\n");
676 ret = -ENOMEM;
677 goto out_err2;
678 }
679
680#ifdef CONFIG_DEBUG_FS
681 /* /sys/kernel/debug/mrst_pmu */
682 (void) debugfs_create_file("mrst_pmu", S_IFREG | S_IRUGO,
683 NULL, NULL, &devices_state_operations);
684#endif
685 pmu_reg = pmu; /* success */
686
687 if (request_irq(pdev->irq, pmu_irq, 0, MRST_PMU_DRV_NAME, NULL)) {
688 dev_err(&pdev->dev, "Registering isr has failed\n");
689 ret = -1;
690 goto out_err3;
691 }
692
693 pmu_scu_firmware_debug();
694
695 pmu_write_wkc(S0I3_WAKE_SOURCES); /* Enable S0i3 wakeup sources */
696
697 pmu_wait_ready();
698
699 pmu_write_ssc(D0I1_ACG_SSS_TARGET); /* Enable Auto-Clock_Gating */
700 pmu_write_cmd(0x201);
701
702 spin_lock_init(&mrst_pmu_power_state_lock);
703
704 /* Enable the hardware interrupt */
705 pmu_irq_enable();
706 return 0;
707
708out_err3:
709 free_irq(pdev->irq, NULL);
710 pci_iounmap(pdev, pmu_reg);
711 pmu_reg = NULL;
712out_err2:
713 pci_release_region(pdev, 0);
714out_err1:
715 pci_disable_device(pdev);
716 return ret;
717}
718
719static void __devexit pmu_remove(struct pci_dev *pdev)
720{
721 dev_err(&pdev->dev, "Mid PM pmu_remove called\n");
722
723 /* Freeing up the irq */
724 free_irq(pdev->irq, NULL);
725
726 pci_iounmap(pdev, pmu_reg);
727 pmu_reg = NULL;
728
729 /* disable the current PCI device */
730 pci_release_region(pdev, 0);
731 pci_disable_device(pdev);
732}
733
734static DEFINE_PCI_DEVICE_TABLE(pmu_pci_ids) = {
735 { PCI_VDEVICE(INTEL, PCI_DEV_ID_MRST_PMU), 0 },
736 { }
737};
738
739MODULE_DEVICE_TABLE(pci, pmu_pci_ids);
740
741static struct pci_driver driver = {
742 .name = MRST_PMU_DRV_NAME,
743 .id_table = pmu_pci_ids,
744 .probe = pmu_probe,
745 .remove = __devexit_p(pmu_remove),
746};
747
748/**
749 * pmu_pci_register - register the PMU driver as PCI device
750 */
751static int __init pmu_pci_register(void)
752{
753 return pci_register_driver(&driver);
754}
755
756/* Register and probe via fs_initcall() to preceed device_initcall() */
757fs_initcall(pmu_pci_register);
758
759static void __exit mid_pci_cleanup(void)
760{
761 pci_unregister_driver(&driver);
762}
763
764static int ia_major;
765static int ia_minor;
766
767static int pmu_sfi_parse_oem(struct sfi_table_header *table)
768{
769 struct sfi_table_simple *sb;
770
771 sb = (struct sfi_table_simple *)table;
772 ia_major = (sb->pentry[1] >> 0) & 0xFFFF;
773 ia_minor = (sb->pentry[1] >> 16) & 0xFFFF;
774 printk(KERN_INFO "mrst_pmu: IA FW version v%x.%x\n",
775 ia_major, ia_minor);
776
777 return 0;
778}
779
780static int __init scu_fw_check(void)
781{
782 int ret;
783 u32 fw_version;
784
785 if (!pmu_reg)
786 return 0; /* this driver didn't probe-out */
787
788 sfi_table_parse("OEMB", NULL, NULL, pmu_sfi_parse_oem);
789
790 if (ia_major < 0x6005 || ia_minor < 0x1525) {
791 WARN(1, "mrst_pmu: IA FW version too old\n");
792 return -1;
793 }
794
795 ret = intel_scu_ipc_command(IPCMSG_FW_REVISION, 0, NULL, 0,
796 &fw_version, 1);
797
798 if (ret) {
799 WARN(1, "mrst_pmu: IPC FW version? %d\n", ret);
800 } else {
801 int scu_major = (fw_version >> 8) & 0xFF;
802 int scu_minor = (fw_version >> 0) & 0xFF;
803
804 printk(KERN_INFO "mrst_pmu: firmware v%x\n", fw_version);
805
806 if ((scu_major >= 0xC0) && (scu_minor >= 0x49)) {
807 printk(KERN_INFO "mrst_pmu: enabling S0i3\n");
808 mrst_pmu_s0i3_enable = true;
809 } else {
810 WARN(1, "mrst_pmu: S0i3 disabled, old firmware %X.%X",
811 scu_major, scu_minor);
812 }
813 }
814 return 0;
815}
816late_initcall(scu_fw_check);
817module_exit(mid_pci_cleanup);