blob: bcd5d54b7d4d2b3cfc938acf6141cc65bb4ec8ec [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2** DINO manager
3**
4** (c) Copyright 1999 Red Hat Software
5** (c) Copyright 1999 SuSE GmbH
6** (c) Copyright 1999,2000 Hewlett-Packard Company
7** (c) Copyright 2000 Grant Grundler
Helge Deller5076c152006-03-27 12:52:15 -07008** (c) Copyright 2006 Helge Deller
Linus Torvalds1da177e2005-04-16 15:20:36 -07009**
10** This program is free software; you can redistribute it and/or modify
11** it under the terms of the GNU General Public License as published by
12** the Free Software Foundation; either version 2 of the License, or
13** (at your option) any later version.
14**
15** This module provides access to Dino PCI bus (config/IOport spaces)
16** and helps manage Dino IRQ lines.
17**
18** Dino interrupt handling is a bit complicated.
19** Dino always writes to the broadcast EIR via irr0 for now.
20** (BIG WARNING: using broadcast EIR is a really bad thing for SMP!)
21** Only one processor interrupt is used for the 11 IRQ line
22** inputs to dino.
23**
24** The different between Built-in Dino and Card-Mode
25** dino is in chip initialization and pci device initialization.
26**
27** Linux drivers can only use Card-Mode Dino if pci devices I/O port
28** BARs are configured and used by the driver. Programming MMIO address
29** requires substantial knowledge of available Host I/O address ranges
30** is currently not supported. Port/Config accessor functions are the
31** same. "BIOS" differences are handled within the existing routines.
32*/
33
34/* Changes :
35** 2001-06-14 : Clement Moyroud (moyroudc@esiee.fr)
36** - added support for the integrated RS232.
37*/
38
39/*
40** TODO: create a virtual address for each Dino HPA.
41** GSC code might be able to do this since IODC data tells us
42** how many pages are used. PCI subsystem could (must?) do this
43** for PCI drivers devices which implement/use MMIO registers.
44*/
45
Linus Torvalds1da177e2005-04-16 15:20:36 -070046#include <linux/delay.h>
47#include <linux/types.h>
48#include <linux/kernel.h>
49#include <linux/pci.h>
50#include <linux/init.h>
51#include <linux/ioport.h>
52#include <linux/slab.h>
53#include <linux/interrupt.h> /* for struct irqaction */
54#include <linux/spinlock.h> /* for spinlock_t and prototypes */
55
56#include <asm/pdc.h>
57#include <asm/page.h>
58#include <asm/system.h>
59#include <asm/io.h>
60#include <asm/hardware.h>
61
62#include "gsc.h"
63
64#undef DINO_DEBUG
65
66#ifdef DINO_DEBUG
67#define DBG(x...) printk(x)
68#else
69#define DBG(x...)
70#endif
71
72/*
73** Config accessor functions only pass in the 8-bit bus number
74** and not the 8-bit "PCI Segment" number. Each Dino will be
75** assigned a PCI bus number based on "when" it's discovered.
76**
77** The "secondary" bus number is set to this before calling
78** pci_scan_bus(). If any PPB's are present, the scan will
79** discover them and update the "secondary" and "subordinate"
80** fields in Dino's pci_bus structure.
81**
82** Changes in the configuration *will* result in a different
83** bus number for each dino.
84*/
85
Matthew Wilcoxf45adcf2006-01-10 20:48:06 -050086#define is_card_dino(id) ((id)->hw_type == HPHW_A_DMA)
87#define is_cujo(id) ((id)->hversion == 0x682)
Linus Torvalds1da177e2005-04-16 15:20:36 -070088
89#define DINO_IAR0 0x004
90#define DINO_IODC_ADDR 0x008
91#define DINO_IODC_DATA_0 0x008
92#define DINO_IODC_DATA_1 0x008
93#define DINO_IRR0 0x00C
94#define DINO_IAR1 0x010
95#define DINO_IRR1 0x014
96#define DINO_IMR 0x018
97#define DINO_IPR 0x01C
98#define DINO_TOC_ADDR 0x020
99#define DINO_ICR 0x024
100#define DINO_ILR 0x028
101#define DINO_IO_COMMAND 0x030
102#define DINO_IO_STATUS 0x034
103#define DINO_IO_CONTROL 0x038
104#define DINO_IO_GSC_ERR_RESP 0x040
105#define DINO_IO_ERR_INFO 0x044
106#define DINO_IO_PCI_ERR_RESP 0x048
107#define DINO_IO_FBB_EN 0x05c
108#define DINO_IO_ADDR_EN 0x060
109#define DINO_PCI_ADDR 0x064
110#define DINO_CONFIG_DATA 0x068
111#define DINO_IO_DATA 0x06c
112#define DINO_MEM_DATA 0x070 /* Dino 3.x only */
113#define DINO_GSC2X_CONFIG 0x7b4
114#define DINO_GMASK 0x800
115#define DINO_PAMR 0x804
116#define DINO_PAPR 0x808
117#define DINO_DAMODE 0x80c
118#define DINO_PCICMD 0x810
119#define DINO_PCISTS 0x814
120#define DINO_MLTIM 0x81c
121#define DINO_BRDG_FEAT 0x820
122#define DINO_PCIROR 0x824
123#define DINO_PCIWOR 0x828
124#define DINO_TLTIM 0x830
125
126#define DINO_IRQS 11 /* bits 0-10 are architected */
127#define DINO_IRR_MASK 0x5ff /* only 10 bits are implemented */
Helge Deller4d64c9f2006-01-10 20:47:54 -0500128#define DINO_LOCAL_IRQS (DINO_IRQS+1)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700129
130#define DINO_MASK_IRQ(x) (1<<(x))
131
132#define PCIINTA 0x001
133#define PCIINTB 0x002
134#define PCIINTC 0x004
135#define PCIINTD 0x008
136#define PCIINTE 0x010
137#define PCIINTF 0x020
138#define GSCEXTINT 0x040
139/* #define xxx 0x080 - bit 7 is "default" */
140/* #define xxx 0x100 - bit 8 not used */
141/* #define xxx 0x200 - bit 9 not used */
142#define RS232INT 0x400
143
144struct dino_device
145{
146 struct pci_hba_data hba; /* 'C' inheritance - must be first */
147 spinlock_t dinosaur_pen;
148 unsigned long txn_addr; /* EIR addr to generate interrupt */
149 u32 txn_data; /* EIR data assign to each dino */
150 u32 imr; /* IRQ's which are enabled */
Helge Deller4d64c9f2006-01-10 20:47:54 -0500151 int global_irq[DINO_LOCAL_IRQS]; /* map IMR bit to global irq */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700152#ifdef DINO_DEBUG
153 unsigned int dino_irr0; /* save most recent IRQ line stat */
154#endif
155};
156
157/* Looks nice and keeps the compiler happy */
158#define DINO_DEV(d) ((struct dino_device *) d)
159
160
161/*
162 * Dino Configuration Space Accessor Functions
163 */
164
165#define DINO_CFG_TOK(bus,dfn,pos) ((u32) ((bus)<<16 | (dfn)<<8 | (pos)))
166
167/*
168 * keep the current highest bus count to assist in allocating busses. This
169 * tries to keep a global bus count total so that when we discover an
170 * entirely new bus, it can be given a unique bus number.
171 */
172static int dino_current_bus = 0;
173
174static int dino_cfg_read(struct pci_bus *bus, unsigned int devfn, int where,
175 int size, u32 *val)
176{
177 struct dino_device *d = DINO_DEV(parisc_walk_tree(bus->bridge));
178 u32 local_bus = (bus->parent == NULL) ? 0 : bus->secondary;
179 u32 v = DINO_CFG_TOK(local_bus, devfn, where & ~3);
180 void __iomem *base_addr = d->hba.base_addr;
181 unsigned long flags;
182
Harvey Harrisona8043ec2008-05-14 16:21:56 -0700183 DBG("%s: %p, %d, %d, %d\n", __func__, base_addr, devfn, where,
Matthew Wilcox92b919f2005-10-21 22:38:23 -0400184 size);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700185 spin_lock_irqsave(&d->dinosaur_pen, flags);
186
187 /* tell HW which CFG address */
188 __raw_writel(v, base_addr + DINO_PCI_ADDR);
189
190 /* generate cfg read cycle */
191 if (size == 1) {
192 *val = readb(base_addr + DINO_CONFIG_DATA + (where & 3));
193 } else if (size == 2) {
194 *val = readw(base_addr + DINO_CONFIG_DATA + (where & 2));
195 } else if (size == 4) {
196 *val = readl(base_addr + DINO_CONFIG_DATA);
197 }
198
199 spin_unlock_irqrestore(&d->dinosaur_pen, flags);
200 return 0;
201}
202
203/*
204 * Dino address stepping "feature":
205 * When address stepping, Dino attempts to drive the bus one cycle too soon
206 * even though the type of cycle (config vs. MMIO) might be different.
207 * The read of Ven/Prod ID is harmless and avoids Dino's address stepping.
208 */
209static int dino_cfg_write(struct pci_bus *bus, unsigned int devfn, int where,
210 int size, u32 val)
211{
212 struct dino_device *d = DINO_DEV(parisc_walk_tree(bus->bridge));
213 u32 local_bus = (bus->parent == NULL) ? 0 : bus->secondary;
214 u32 v = DINO_CFG_TOK(local_bus, devfn, where & ~3);
215 void __iomem *base_addr = d->hba.base_addr;
216 unsigned long flags;
217
Harvey Harrisona8043ec2008-05-14 16:21:56 -0700218 DBG("%s: %p, %d, %d, %d\n", __func__, base_addr, devfn, where,
Matthew Wilcox92b919f2005-10-21 22:38:23 -0400219 size);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700220 spin_lock_irqsave(&d->dinosaur_pen, flags);
221
222 /* avoid address stepping feature */
223 __raw_writel(v & 0xffffff00, base_addr + DINO_PCI_ADDR);
224 __raw_readl(base_addr + DINO_CONFIG_DATA);
225
226 /* tell HW which CFG address */
227 __raw_writel(v, base_addr + DINO_PCI_ADDR);
228 /* generate cfg read cycle */
229 if (size == 1) {
230 writeb(val, base_addr + DINO_CONFIG_DATA + (where & 3));
231 } else if (size == 2) {
232 writew(val, base_addr + DINO_CONFIG_DATA + (where & 2));
233 } else if (size == 4) {
234 writel(val, base_addr + DINO_CONFIG_DATA);
235 }
236
237 spin_unlock_irqrestore(&d->dinosaur_pen, flags);
238 return 0;
239}
240
241static struct pci_ops dino_cfg_ops = {
242 .read = dino_cfg_read,
243 .write = dino_cfg_write,
244};
245
246
247/*
248 * Dino "I/O Port" Space Accessor Functions
249 *
250 * Many PCI devices don't require use of I/O port space (eg Tulip,
251 * NCR720) since they export the same registers to both MMIO and
252 * I/O port space. Performance is going to stink if drivers use
253 * I/O port instead of MMIO.
254 */
255
256#define DINO_PORT_IN(type, size, mask) \
257static u##size dino_in##size (struct pci_hba_data *d, u16 addr) \
258{ \
259 u##size v; \
260 unsigned long flags; \
261 spin_lock_irqsave(&(DINO_DEV(d)->dinosaur_pen), flags); \
262 /* tell HW which IO Port address */ \
263 __raw_writel((u32) addr, d->base_addr + DINO_PCI_ADDR); \
264 /* generate I/O PORT read cycle */ \
265 v = read##type(d->base_addr+DINO_IO_DATA+(addr&mask)); \
266 spin_unlock_irqrestore(&(DINO_DEV(d)->dinosaur_pen), flags); \
267 return v; \
268}
269
270DINO_PORT_IN(b, 8, 3)
271DINO_PORT_IN(w, 16, 2)
272DINO_PORT_IN(l, 32, 0)
273
274#define DINO_PORT_OUT(type, size, mask) \
275static void dino_out##size (struct pci_hba_data *d, u16 addr, u##size val) \
276{ \
277 unsigned long flags; \
278 spin_lock_irqsave(&(DINO_DEV(d)->dinosaur_pen), flags); \
279 /* tell HW which IO port address */ \
280 __raw_writel((u32) addr, d->base_addr + DINO_PCI_ADDR); \
281 /* generate cfg write cycle */ \
282 write##type(val, d->base_addr+DINO_IO_DATA+(addr&mask)); \
283 spin_unlock_irqrestore(&(DINO_DEV(d)->dinosaur_pen), flags); \
284}
285
286DINO_PORT_OUT(b, 8, 3)
287DINO_PORT_OUT(w, 16, 2)
288DINO_PORT_OUT(l, 32, 0)
289
Adrian Bunkdf8e5bc2008-12-02 03:28:16 +0000290static struct pci_port_ops dino_port_ops = {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700291 .inb = dino_in8,
292 .inw = dino_in16,
293 .inl = dino_in32,
294 .outb = dino_out8,
295 .outw = dino_out16,
296 .outl = dino_out32
297};
298
Thomas Gleixner4c4231e2011-02-06 20:45:52 +0000299static void dino_mask_irq(struct irq_data *d)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700300{
Thomas Gleixner4c4231e2011-02-06 20:45:52 +0000301 struct dino_device *dino_dev = irq_data_get_irq_chip_data(d);
302 int local_irq = gsc_find_local_irq(d->irq, dino_dev->global_irq, DINO_LOCAL_IRQS);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700303
Thomas Gleixner4c4231e2011-02-06 20:45:52 +0000304 DBG(KERN_WARNING "%s(0x%p, %d)\n", __func__, dino_dev, d->irq);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700305
306 /* Clear the matching bit in the IMR register */
307 dino_dev->imr &= ~(DINO_MASK_IRQ(local_irq));
308 __raw_writel(dino_dev->imr, dino_dev->hba.base_addr+DINO_IMR);
309}
310
Thomas Gleixner4c4231e2011-02-06 20:45:52 +0000311static void dino_unmask_irq(struct irq_data *d)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700312{
Thomas Gleixner4c4231e2011-02-06 20:45:52 +0000313 struct dino_device *dino_dev = irq_data_get_irq_chip_data(d);
314 int local_irq = gsc_find_local_irq(d->irq, dino_dev->global_irq, DINO_LOCAL_IRQS);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700315 u32 tmp;
316
Thomas Gleixner4c4231e2011-02-06 20:45:52 +0000317 DBG(KERN_WARNING "%s(0x%p, %d)\n", __func__, dino_dev, d->irq);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700318
319 /*
320 ** clear pending IRQ bits
321 **
322 ** This does NOT change ILR state!
323 ** See comment below for ILR usage.
324 */
325 __raw_readl(dino_dev->hba.base_addr+DINO_IPR);
326
327 /* set the matching bit in the IMR register */
328 dino_dev->imr |= DINO_MASK_IRQ(local_irq); /* used in dino_isr() */
329 __raw_writel( dino_dev->imr, dino_dev->hba.base_addr+DINO_IMR);
330
331 /* Emulate "Level Triggered" Interrupt
332 ** Basically, a driver is blowing it if the IRQ line is asserted
333 ** while the IRQ is disabled. But tulip.c seems to do that....
334 ** Give 'em a kluge award and a nice round of applause!
335 **
336 ** The gsc_write will generate an interrupt which invokes dino_isr().
337 ** dino_isr() will read IPR and find nothing. But then catch this
338 ** when it also checks ILR.
339 */
340 tmp = __raw_readl(dino_dev->hba.base_addr+DINO_ILR);
341 if (tmp & DINO_MASK_IRQ(local_irq)) {
342 DBG(KERN_WARNING "%s(): IRQ asserted! (ILR 0x%x)\n",
Harvey Harrisona8043ec2008-05-14 16:21:56 -0700343 __func__, tmp);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700344 gsc_writel(dino_dev->txn_data, dino_dev->txn_addr);
345 }
346}
347
Thomas Gleixnerdfe07562009-06-10 19:56:04 +0000348static struct irq_chip dino_interrupt_type = {
Thomas Gleixner4c4231e2011-02-06 20:45:52 +0000349 .name = "GSC-PCI",
350 .irq_unmask = dino_unmask_irq,
351 .irq_mask = dino_mask_irq,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700352};
353
354
355/*
356 * Handle a Processor interrupt generated by Dino.
357 *
358 * ilr_loop counter is a kluge to prevent a "stuck" IRQ line from
359 * wedging the CPU. Could be removed or made optional at some point.
360 */
David Howells7d12e782006-10-05 14:55:46 +0100361static irqreturn_t dino_isr(int irq, void *intr_dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700362{
363 struct dino_device *dino_dev = intr_dev;
364 u32 mask;
365 int ilr_loop = 100;
366
367 /* read and acknowledge pending interrupts */
368#ifdef DINO_DEBUG
369 dino_dev->dino_irr0 =
370#endif
371 mask = __raw_readl(dino_dev->hba.base_addr+DINO_IRR0) & DINO_IRR_MASK;
372
373 if (mask == 0)
374 return IRQ_NONE;
375
376ilr_again:
377 do {
378 int local_irq = __ffs(mask);
379 int irq = dino_dev->global_irq[local_irq];
380 DBG(KERN_DEBUG "%s(%d, %p) mask 0x%x\n",
Harvey Harrisona8043ec2008-05-14 16:21:56 -0700381 __func__, irq, intr_dev, mask);
Kyle McMartinba200852010-10-13 21:00:55 -0400382 generic_handle_irq(irq);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700383 mask &= ~(1 << local_irq);
384 } while (mask);
385
386 /* Support for level triggered IRQ lines.
387 **
388 ** Dropping this support would make this routine *much* faster.
389 ** But since PCI requires level triggered IRQ line to share lines...
390 ** device drivers may assume lines are level triggered (and not
391 ** edge triggered like EISA/ISA can be).
392 */
393 mask = __raw_readl(dino_dev->hba.base_addr+DINO_ILR) & dino_dev->imr;
394 if (mask) {
395 if (--ilr_loop > 0)
396 goto ilr_again;
397 printk(KERN_ERR "Dino 0x%p: stuck interrupt %d\n",
398 dino_dev->hba.base_addr, mask);
399 return IRQ_NONE;
400 }
401 return IRQ_HANDLED;
402}
403
404static void dino_assign_irq(struct dino_device *dino, int local_irq, int *irqp)
405{
406 int irq = gsc_assign_irq(&dino_interrupt_type, dino);
407 if (irq == NO_IRQ)
408 return;
409
410 *irqp = irq;
411 dino->global_irq[local_irq] = irq;
412}
413
414static void dino_choose_irq(struct parisc_device *dev, void *ctrl)
415{
416 int irq;
417 struct dino_device *dino = ctrl;
418
419 switch (dev->id.sversion) {
420 case 0x00084: irq = 8; break; /* PS/2 */
421 case 0x0008c: irq = 10; break; /* RS232 */
422 case 0x00096: irq = 8; break; /* PS/2 */
423 default: return; /* Unknown */
424 }
425
426 dino_assign_irq(dino, irq, &dev->irq);
427}
428
Helge Deller04d35d72006-01-10 20:47:50 -0500429
430/*
431 * Cirrus 6832 Cardbus reports wrong irq on RDI Tadpole PARISC Laptop (deller@gmx.de)
432 * (the irqs are off-by-one, not sure yet if this is a cirrus, dino-hardware or dino-driver problem...)
433 */
434static void __devinit quirk_cirrus_cardbus(struct pci_dev *dev)
435{
436 u8 new_irq = dev->irq - 1;
437 printk(KERN_INFO "PCI: Cirrus Cardbus IRQ fixup for %s, from %d to %d\n",
438 pci_name(dev), dev->irq, new_irq);
439 dev->irq = new_irq;
440}
441DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_6832, quirk_cirrus_cardbus );
442
443
Linus Torvalds1da177e2005-04-16 15:20:36 -0700444static void __init
445dino_bios_init(void)
446{
447 DBG("dino_bios_init\n");
448}
449
450/*
451 * dino_card_setup - Set up the memory space for a Dino in card mode.
452 * @bus: the bus under this dino
453 *
454 * Claim an 8MB chunk of unused IO space and call the generic PCI routines
455 * to set up the addresses of the devices on this bus.
456 */
457#define _8MB 0x00800000UL
458static void __init
459dino_card_setup(struct pci_bus *bus, void __iomem *base_addr)
460{
461 int i;
462 struct dino_device *dino_dev = DINO_DEV(parisc_walk_tree(bus->bridge));
463 struct resource *res;
464 char name[128];
465 int size;
466
467 res = &dino_dev->hba.lmmio_space;
468 res->flags = IORESOURCE_MEM;
469 size = scnprintf(name, sizeof(name), "Dino LMMIO (%s)",
Kay Sieversd4995242009-01-26 03:53:16 +0000470 dev_name(bus->bridge));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700471 res->name = kmalloc(size+1, GFP_KERNEL);
472 if(res->name)
473 strcpy((char *)res->name, name);
474 else
475 res->name = dino_dev->hba.lmmio_space.name;
476
477
478 if (ccio_allocate_resource(dino_dev->hba.dev, res, _8MB,
479 F_EXTEND(0xf0000000UL) | _8MB,
480 F_EXTEND(0xffffffffUL) &~ _8MB, _8MB) < 0) {
481 struct list_head *ln, *tmp_ln;
482
483 printk(KERN_ERR "Dino: cannot attach bus %s\n",
Kay Sieversd4995242009-01-26 03:53:16 +0000484 dev_name(bus->bridge));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700485 /* kill the bus, we can't do anything with it */
486 list_for_each_safe(ln, tmp_ln, &bus->devices) {
487 struct pci_dev *dev = pci_dev_b(ln);
488
Linus Torvalds1da177e2005-04-16 15:20:36 -0700489 list_del(&dev->bus_list);
490 }
491
492 return;
493 }
494 bus->resource[1] = res;
495 bus->resource[0] = &(dino_dev->hba.io_space);
496
497 /* Now tell dino what range it has */
498 for (i = 1; i < 31; i++) {
499 if (res->start == F_EXTEND(0xf0000000UL | (i * _8MB)))
500 break;
501 }
Matthew Wilcox92b919f2005-10-21 22:38:23 -0400502 DBG("DINO GSC WRITE i=%d, start=%lx, dino addr = %p\n",
Linus Torvalds1da177e2005-04-16 15:20:36 -0700503 i, res->start, base_addr + DINO_IO_ADDR_EN);
504 __raw_writel(1 << i, base_addr + DINO_IO_ADDR_EN);
505}
506
507static void __init
508dino_card_fixup(struct pci_dev *dev)
509{
510 u32 irq_pin;
511
512 /*
513 ** REVISIT: card-mode PCI-PCI expansion chassis do exist.
514 ** Not sure they were ever productized.
515 ** Die here since we'll die later in dino_inb() anyway.
516 */
517 if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
518 panic("Card-Mode Dino: PCI-PCI Bridge not supported\n");
519 }
520
521 /*
522 ** Set Latency Timer to 0xff (not a shared bus)
523 ** Set CACHELINE_SIZE.
524 */
525 dino_cfg_write(dev->bus, dev->devfn,
526 PCI_CACHE_LINE_SIZE, 2, 0xff00 | L1_CACHE_BYTES/4);
527
528 /*
529 ** Program INT_LINE for card-mode devices.
530 ** The cards are hardwired according to this algorithm.
531 ** And it doesn't matter if PPB's are present or not since
532 ** the IRQ lines bypass the PPB.
533 **
534 ** "-1" converts INTA-D (1-4) to PCIINTA-D (0-3) range.
535 ** The additional "-1" adjusts for skewing the IRQ<->slot.
536 */
537 dino_cfg_read(dev->bus, dev->devfn, PCI_INTERRUPT_PIN, 1, &irq_pin);
Bjorn Helgaasf0e88af2008-12-09 16:12:22 -0700538 dev->irq = pci_swizzle_interrupt_pin(dev, irq_pin) - 1;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700539
540 /* Shouldn't really need to do this but it's in case someone tries
541 ** to bypass PCI services and look at the card themselves.
542 */
543 dino_cfg_write(dev->bus, dev->devfn, PCI_INTERRUPT_LINE, 1, dev->irq);
544}
545
546/* The alignment contraints for PCI bridges under dino */
547#define DINO_BRIDGE_ALIGN 0x100000
548
549
550static void __init
551dino_fixup_bus(struct pci_bus *bus)
552{
553 struct list_head *ln;
554 struct pci_dev *dev;
555 struct dino_device *dino_dev = DINO_DEV(parisc_walk_tree(bus->bridge));
556 int port_base = HBA_PORT_BASE(dino_dev->hba.hba_num);
557
558 DBG(KERN_WARNING "%s(0x%p) bus %d platform_data 0x%p\n",
Harvey Harrisona8043ec2008-05-14 16:21:56 -0700559 __func__, bus, bus->secondary,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700560 bus->bridge->platform_data);
561
562 /* Firmware doesn't set up card-mode dino, so we have to */
563 if (is_card_dino(&dino_dev->hba.dev->id)) {
564 dino_card_setup(bus, dino_dev->hba.base_addr);
565 } else if(bus->parent == NULL) {
566 /* must have a dino above it, reparent the resources
567 * into the dino window */
568 int i;
569 struct resource *res = &dino_dev->hba.lmmio_space;
570
571 bus->resource[0] = &(dino_dev->hba.io_space);
572 for(i = 0; i < DINO_MAX_LMMIO_RESOURCES; i++) {
573 if(res[i].flags == 0)
574 break;
575 bus->resource[i+1] = &res[i];
576 }
577
Grant Grundler9785d642009-01-28 22:30:55 -0700578 } else if (bus->parent) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700579 int i;
580
581 pci_read_bridge_bases(bus);
582
583
584 for(i = PCI_BRIDGE_RESOURCES; i < PCI_NUM_RESOURCES; i++) {
585 if((bus->self->resource[i].flags &
586 (IORESOURCE_IO | IORESOURCE_MEM)) == 0)
587 continue;
588
589 if(bus->self->resource[i].flags & IORESOURCE_MEM) {
590 /* There's a quirk to alignment of
591 * bridge memory resources: the start
592 * is the alignment and start-end is
593 * the size. However, firmware will
594 * have assigned start and end, so we
595 * need to take this into account */
596 bus->self->resource[i].end = bus->self->resource[i].end - bus->self->resource[i].start + DINO_BRIDGE_ALIGN;
597 bus->self->resource[i].start = DINO_BRIDGE_ALIGN;
598
599 }
600
601 DBG("DEBUG %s assigning %d [0x%lx,0x%lx]\n",
Kay Sieversd4995242009-01-26 03:53:16 +0000602 dev_name(&bus->self->dev), i,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700603 bus->self->resource[i].start,
604 bus->self->resource[i].end);
Helge Deller1e0deab2009-08-02 15:17:37 +0200605 WARN_ON(pci_assign_resource(bus->self, i));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700606 DBG("DEBUG %s after assign %d [0x%lx,0x%lx]\n",
Kay Sieversd4995242009-01-26 03:53:16 +0000607 dev_name(&bus->self->dev), i,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700608 bus->self->resource[i].start,
609 bus->self->resource[i].end);
610 }
611 }
612
613
614 list_for_each(ln, &bus->devices) {
615 int i;
616
617 dev = pci_dev_b(ln);
618 if (is_card_dino(&dino_dev->hba.dev->id))
619 dino_card_fixup(dev);
620
621 /*
622 ** P2PB's only have 2 BARs, no IRQs.
623 ** I'd like to just ignore them for now.
624 */
625 if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)
626 continue;
627
628 /* Adjust the I/O Port space addresses */
629 for (i = 0; i < PCI_NUM_RESOURCES; i++) {
630 struct resource *res = &dev->resource[i];
631 if (res->flags & IORESOURCE_IO) {
632 res->start |= port_base;
633 res->end |= port_base;
634 }
635#ifdef __LP64__
636 /* Sign Extend MMIO addresses */
637 else if (res->flags & IORESOURCE_MEM) {
638 res->start |= F_EXTEND(0UL);
639 res->end |= F_EXTEND(0UL);
640 }
641#endif
642 }
643 /* null out the ROM resource if there is one (we don't
644 * care about an expansion rom on parisc, since it
645 * usually contains (x86) bios code) */
646 dev->resource[PCI_ROM_RESOURCE].flags = 0;
647
648 if(dev->irq == 255) {
649
650#define DINO_FIX_UNASSIGNED_INTERRUPTS
651#ifdef DINO_FIX_UNASSIGNED_INTERRUPTS
652
653 /* This code tries to assign an unassigned
654 * interrupt. Leave it disabled unless you
655 * *really* know what you're doing since the
656 * pin<->interrupt line mapping varies by bus
657 * and machine */
658
659 u32 irq_pin;
660
661 dino_cfg_read(dev->bus, dev->devfn,
662 PCI_INTERRUPT_PIN, 1, &irq_pin);
Bjorn Helgaasf0e88af2008-12-09 16:12:22 -0700663 irq_pin = pci_swizzle_interrupt_pin(dev, irq_pin) - 1;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700664 printk(KERN_WARNING "Device %s has undefined IRQ, "
665 "setting to %d\n", pci_name(dev), irq_pin);
666 dino_cfg_write(dev->bus, dev->devfn,
667 PCI_INTERRUPT_LINE, 1, irq_pin);
668 dino_assign_irq(dino_dev, irq_pin, &dev->irq);
669#else
670 dev->irq = 65535;
671 printk(KERN_WARNING "Device %s has unassigned IRQ\n", pci_name(dev));
672#endif
673 } else {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700674 /* Adjust INT_LINE for that busses region */
675 dino_assign_irq(dino_dev, dev->irq, &dev->irq);
676 }
677 }
678}
679
680
Adrian Bunkdf8e5bc2008-12-02 03:28:16 +0000681static struct pci_bios_ops dino_bios_ops = {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700682 .init = dino_bios_init,
683 .fixup_bus = dino_fixup_bus
684};
685
686
687/*
688 * Initialise a DINO controller chip
689 */
690static void __init
691dino_card_init(struct dino_device *dino_dev)
692{
693 u32 brdg_feat = 0x00784e05;
Matthew Wilcox92b919f2005-10-21 22:38:23 -0400694 unsigned long status;
695
696 status = __raw_readl(dino_dev->hba.base_addr+DINO_IO_STATUS);
697 if (status & 0x0000ff80) {
698 __raw_writel(0x00000005,
699 dino_dev->hba.base_addr+DINO_IO_COMMAND);
700 udelay(1);
701 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700702
703 __raw_writel(0x00000000, dino_dev->hba.base_addr+DINO_GMASK);
704 __raw_writel(0x00000001, dino_dev->hba.base_addr+DINO_IO_FBB_EN);
705 __raw_writel(0x00000000, dino_dev->hba.base_addr+DINO_ICR);
706
707#if 1
708/* REVISIT - should be a runtime check (eg if (CPU_IS_PCX_L) ...) */
709 /*
710 ** PCX-L processors don't support XQL like Dino wants it.
711 ** PCX-L2 ignore XQL signal and it doesn't matter.
712 */
713 brdg_feat &= ~0x4; /* UXQL */
714#endif
715 __raw_writel( brdg_feat, dino_dev->hba.base_addr+DINO_BRDG_FEAT);
716
717 /*
718 ** Don't enable address decoding until we know which I/O range
719 ** currently is available from the host. Only affects MMIO
720 ** and not I/O port space.
721 */
722 __raw_writel(0x00000000, dino_dev->hba.base_addr+DINO_IO_ADDR_EN);
723
724 __raw_writel(0x00000000, dino_dev->hba.base_addr+DINO_DAMODE);
725 __raw_writel(0x00222222, dino_dev->hba.base_addr+DINO_PCIROR);
726 __raw_writel(0x00222222, dino_dev->hba.base_addr+DINO_PCIWOR);
727
728 __raw_writel(0x00000040, dino_dev->hba.base_addr+DINO_MLTIM);
729 __raw_writel(0x00000080, dino_dev->hba.base_addr+DINO_IO_CONTROL);
730 __raw_writel(0x0000008c, dino_dev->hba.base_addr+DINO_TLTIM);
731
732 /* Disable PAMR before writing PAPR */
733 __raw_writel(0x0000007e, dino_dev->hba.base_addr+DINO_PAMR);
734 __raw_writel(0x0000007f, dino_dev->hba.base_addr+DINO_PAPR);
735 __raw_writel(0x00000000, dino_dev->hba.base_addr+DINO_PAMR);
736
737 /*
738 ** Dino ERS encourages enabling FBB (0x6f).
739 ** We can't until we know *all* devices below us can support it.
740 ** (Something in device configuration header tells us).
741 */
742 __raw_writel(0x0000004f, dino_dev->hba.base_addr+DINO_PCICMD);
743
744 /* Somewhere, the PCI spec says give devices 1 second
745 ** to recover from the #RESET being de-asserted.
746 ** Experience shows most devices only need 10ms.
747 ** This short-cut speeds up booting significantly.
748 */
749 mdelay(pci_post_reset_delay);
750}
751
752static int __init
753dino_bridge_init(struct dino_device *dino_dev, const char *name)
754{
755 unsigned long io_addr;
756 int result, i, count=0;
757 struct resource *res, *prevres = NULL;
758 /*
759 * Decoding IO_ADDR_EN only works for Built-in Dino
760 * since PDC has already initialized this.
761 */
762
763 io_addr = __raw_readl(dino_dev->hba.base_addr + DINO_IO_ADDR_EN);
764 if (io_addr == 0) {
765 printk(KERN_WARNING "%s: No PCI devices enabled.\n", name);
766 return -ENODEV;
767 }
768
769 res = &dino_dev->hba.lmmio_space;
770 for (i = 0; i < 32; i++) {
771 unsigned long start, end;
772
773 if((io_addr & (1 << i)) == 0)
774 continue;
775
Helge Deller5076c152006-03-27 12:52:15 -0700776 start = F_EXTEND(0xf0000000UL) | (i << 23);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700777 end = start + 8 * 1024 * 1024 - 1;
778
779 DBG("DINO RANGE %d is at 0x%lx-0x%lx\n", count,
780 start, end);
781
782 if(prevres && prevres->end + 1 == start) {
783 prevres->end = end;
784 } else {
785 if(count >= DINO_MAX_LMMIO_RESOURCES) {
786 printk(KERN_ERR "%s is out of resource windows for range %d (0x%lx-0x%lx)\n", name, count, start, end);
787 break;
788 }
789 prevres = res;
790 res->start = start;
791 res->end = end;
792 res->flags = IORESOURCE_MEM;
793 res->name = kmalloc(64, GFP_KERNEL);
794 if(res->name)
795 snprintf((char *)res->name, 64, "%s LMMIO %d",
796 name, count);
797 res++;
798 count++;
799 }
800 }
801
802 res = &dino_dev->hba.lmmio_space;
803
804 for(i = 0; i < DINO_MAX_LMMIO_RESOURCES; i++) {
805 if(res[i].flags == 0)
806 break;
807
808 result = ccio_request_resource(dino_dev->hba.dev, &res[i]);
809 if (result < 0) {
Alexander Beregalovc18b4602009-03-19 10:54:07 +0000810 printk(KERN_ERR "%s: failed to claim PCI Bus address "
811 "space %d (0x%lx-0x%lx)!\n", name, i,
812 (unsigned long)res[i].start, (unsigned long)res[i].end);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700813 return result;
814 }
815 }
816 return 0;
817}
818
819static int __init dino_common_init(struct parisc_device *dev,
820 struct dino_device *dino_dev, const char *name)
821{
822 int status;
823 u32 eim;
824 struct gsc_irq gsc_irq;
825 struct resource *res;
826
827 pcibios_register_hba(&dino_dev->hba);
828
829 pci_bios = &dino_bios_ops; /* used by pci_scan_bus() */
830 pci_port = &dino_port_ops;
831
832 /*
833 ** Note: SMP systems can make use of IRR1/IAR1 registers
834 ** But it won't buy much performance except in very
835 ** specific applications/configurations. Note Dino
836 ** still only has 11 IRQ input lines - just map some of them
837 ** to a different processor.
838 */
839 dev->irq = gsc_alloc_irq(&gsc_irq);
840 dino_dev->txn_addr = gsc_irq.txn_addr;
841 dino_dev->txn_data = gsc_irq.txn_data;
842 eim = ((u32) gsc_irq.txn_addr) | gsc_irq.txn_data;
843
844 /*
845 ** Dino needs a PA "IRQ" to get a processor's attention.
846 ** arch/parisc/kernel/irq.c returns an EIRR bit.
847 */
848 if (dev->irq < 0) {
849 printk(KERN_WARNING "%s: gsc_alloc_irq() failed\n", name);
850 return 1;
851 }
852
853 status = request_irq(dev->irq, dino_isr, 0, name, dino_dev);
854 if (status) {
855 printk(KERN_WARNING "%s: request_irq() failed with %d\n",
856 name, status);
857 return 1;
858 }
859
860 /* Support the serial port which is sometimes attached on built-in
861 * Dino / Cujo chips.
862 */
863
864 gsc_fixup_irqs(dev, dino_dev, dino_choose_irq);
865
866 /*
867 ** This enables DINO to generate interrupts when it sees
868 ** any of its inputs *change*. Just asserting an IRQ
869 ** before it's enabled (ie unmasked) isn't good enough.
870 */
871 __raw_writel(eim, dino_dev->hba.base_addr+DINO_IAR0);
872
873 /*
874 ** Some platforms don't clear Dino's IRR0 register at boot time.
875 ** Reading will clear it now.
876 */
877 __raw_readl(dino_dev->hba.base_addr+DINO_IRR0);
878
879 /* allocate I/O Port resource region */
880 res = &dino_dev->hba.io_space;
Matthew Wilcoxf45adcf2006-01-10 20:48:06 -0500881 if (!is_cujo(&dev->id)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700882 res->name = "Dino I/O Port";
883 } else {
884 res->name = "Cujo I/O Port";
885 }
886 res->start = HBA_PORT_BASE(dino_dev->hba.hba_num);
887 res->end = res->start + (HBA_PORT_SPACE_SIZE - 1);
888 res->flags = IORESOURCE_IO; /* do not mark it busy ! */
889 if (request_resource(&ioport_resource, res) < 0) {
890 printk(KERN_ERR "%s: request I/O Port region failed "
891 "0x%lx/%lx (hpa 0x%p)\n",
Alexander Beregalovc18b4602009-03-19 10:54:07 +0000892 name, (unsigned long)res->start, (unsigned long)res->end,
893 dino_dev->hba.base_addr);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700894 return 1;
895 }
896
897 return 0;
898}
899
900#define CUJO_RAVEN_ADDR F_EXTEND(0xf1000000UL)
901#define CUJO_FIREHAWK_ADDR F_EXTEND(0xf1604000UL)
902#define CUJO_RAVEN_BADPAGE 0x01003000UL
903#define CUJO_FIREHAWK_BADPAGE 0x01607000UL
904
905static const char *dino_vers[] = {
906 "2.0",
907 "2.1",
908 "3.0",
909 "3.1"
910};
911
912static const char *cujo_vers[] = {
913 "1.0",
914 "2.0"
915};
916
917void ccio_cujo20_fixup(struct parisc_device *dev, u32 iovp);
918
919/*
920** Determine if dino should claim this chip (return 0) or not (return 1).
921** If so, initialize the chip appropriately (card-mode vs bridge mode).
922** Much of the initialization is common though.
923*/
Matthew Wilcox53f01bb2005-10-21 22:36:40 -0400924static int __init dino_probe(struct parisc_device *dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700925{
926 struct dino_device *dino_dev; // Dino specific control struct
927 const char *version = "unknown";
928 char *name;
929 int is_cujo = 0;
930 struct pci_bus *bus;
Matthew Wilcox53f01bb2005-10-21 22:36:40 -0400931 unsigned long hpa = dev->hpa.start;
932
Linus Torvalds1da177e2005-04-16 15:20:36 -0700933 name = "Dino";
934 if (is_card_dino(&dev->id)) {
935 version = "3.x (card mode)";
936 } else {
Matthew Wilcoxf45adcf2006-01-10 20:48:06 -0500937 if (!is_cujo(&dev->id)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700938 if (dev->id.hversion_rev < 4) {
939 version = dino_vers[dev->id.hversion_rev];
940 }
941 } else {
942 name = "Cujo";
943 is_cujo = 1;
944 if (dev->id.hversion_rev < 2) {
945 version = cujo_vers[dev->id.hversion_rev];
946 }
947 }
948 }
949
Matthew Wilcox92b919f2005-10-21 22:38:23 -0400950 printk("%s version %s found at 0x%lx\n", name, version, hpa);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700951
Matthew Wilcox92b919f2005-10-21 22:38:23 -0400952 if (!request_mem_region(hpa, PAGE_SIZE, name)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700953 printk(KERN_ERR "DINO: Hey! Someone took my MMIO space (0x%ld)!\n",
Matthew Wilcox92b919f2005-10-21 22:38:23 -0400954 hpa);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700955 return 1;
956 }
957
958 /* Check for bugs */
959 if (is_cujo && dev->id.hversion_rev == 1) {
960#ifdef CONFIG_IOMMU_CCIO
961 printk(KERN_WARNING "Enabling Cujo 2.0 bug workaround\n");
Matthew Wilcox92b919f2005-10-21 22:38:23 -0400962 if (hpa == (unsigned long)CUJO_RAVEN_ADDR) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700963 ccio_cujo20_fixup(dev, CUJO_RAVEN_BADPAGE);
Matthew Wilcox92b919f2005-10-21 22:38:23 -0400964 } else if (hpa == (unsigned long)CUJO_FIREHAWK_ADDR) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700965 ccio_cujo20_fixup(dev, CUJO_FIREHAWK_BADPAGE);
966 } else {
Matthew Wilcox92b919f2005-10-21 22:38:23 -0400967 printk("Don't recognise Cujo at address 0x%lx, not enabling workaround\n", hpa);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700968 }
969#endif
970 } else if (!is_cujo && !is_card_dino(&dev->id) &&
971 dev->id.hversion_rev < 3) {
972 printk(KERN_WARNING
973"The GSCtoPCI (Dino hrev %d) bus converter found may exhibit\n"
974"data corruption. See Service Note Numbers: A4190A-01, A4191A-01.\n"
975"Systems shipped after Aug 20, 1997 will not exhibit this problem.\n"
976"Models affected: C180, C160, C160L, B160L, and B132L workstations.\n\n",
977 dev->id.hversion_rev);
978/* REVISIT: why are C200/C240 listed in the README table but not
979** "Models affected"? Could be an omission in the original literature.
980*/
981 }
982
Helge Dellercb6fc182006-01-17 12:40:40 -0700983 dino_dev = kzalloc(sizeof(struct dino_device), GFP_KERNEL);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700984 if (!dino_dev) {
985 printk("dino_init_chip - couldn't alloc dino_device\n");
986 return 1;
987 }
988
Linus Torvalds1da177e2005-04-16 15:20:36 -0700989 dino_dev->hba.dev = dev;
Helge Deller5076c152006-03-27 12:52:15 -0700990 dino_dev->hba.base_addr = ioremap_nocache(hpa, 4096);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700991 dino_dev->hba.lmmio_space_offset = 0; /* CPU addrs == bus addrs */
992 spin_lock_init(&dino_dev->dinosaur_pen);
993 dino_dev->hba.iommu = ccio_get_iommu(dev);
994
995 if (is_card_dino(&dev->id)) {
996 dino_card_init(dino_dev);
997 } else {
998 dino_bridge_init(dino_dev, name);
999 }
1000
1001 if (dino_common_init(dev, dino_dev, name))
1002 return 1;
1003
1004 dev->dev.platform_data = dino_dev;
1005
1006 /*
1007 ** It's not used to avoid chicken/egg problems
1008 ** with configuration accessor functions.
1009 */
Grant Grundlerfed99b12009-04-20 04:28:22 +00001010 dino_dev->hba.hba_bus = bus = pci_scan_bus_parented(&dev->dev,
1011 dino_current_bus, &dino_cfg_ops, NULL);
1012
Linus Torvalds1da177e2005-04-16 15:20:36 -07001013 if(bus) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001014 /* This code *depends* on scanning being single threaded
1015 * if it isn't, this global bus number count will fail
1016 */
1017 dino_current_bus = bus->subordinate + 1;
1018 pci_bus_assign_resources(bus);
Grant Grundlerfed99b12009-04-20 04:28:22 +00001019 pci_bus_add_devices(bus);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001020 } else {
Grant Grundlerfed99b12009-04-20 04:28:22 +00001021 printk(KERN_ERR "ERROR: failed to scan PCI bus on %s (duplicate bus number %d?)\n",
Kay Sieversd4995242009-01-26 03:53:16 +00001022 dev_name(&dev->dev), dino_current_bus);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001023 /* increment the bus number in case of duplicates */
1024 dino_current_bus++;
1025 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001026 return 0;
1027}
1028
1029/*
1030 * Normally, we would just test sversion. But the Elroy PCI adapter has
1031 * the same sversion as Dino, so we have to check hversion as well.
1032 * Unfortunately, the J2240 PDC reports the wrong hversion for the first
1033 * Dino, so we have to test for Dino, Cujo and Dino-in-a-J2240.
1034 * For card-mode Dino, most machines report an sversion of 9D. But 715
1035 * and 725 firmware misreport it as 0x08080 for no adequately explained
1036 * reason.
1037 */
1038static struct parisc_device_id dino_tbl[] = {
1039 { HPHW_A_DMA, HVERSION_REV_ANY_ID, 0x004, 0x0009D },/* Card-mode Dino */
1040 { HPHW_A_DMA, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x08080 }, /* XXX */
1041 { HPHW_BRIDGE, HVERSION_REV_ANY_ID, 0x680, 0xa }, /* Bridge-mode Dino */
1042 { HPHW_BRIDGE, HVERSION_REV_ANY_ID, 0x682, 0xa }, /* Bridge-mode Cujo */
1043 { HPHW_BRIDGE, HVERSION_REV_ANY_ID, 0x05d, 0xa }, /* Dino in a J2240 */
1044 { 0, }
1045};
1046
1047static struct parisc_driver dino_driver = {
Matthew Wilcoxbdad1f82005-10-21 22:36:23 -04001048 .name = "dino",
Linus Torvalds1da177e2005-04-16 15:20:36 -07001049 .id_table = dino_tbl,
Matthew Wilcoxbdad1f82005-10-21 22:36:23 -04001050 .probe = dino_probe,
Linus Torvalds1da177e2005-04-16 15:20:36 -07001051};
1052
1053/*
1054 * One time initialization to let the world know Dino is here.
1055 * This is the only routine which is NOT static.
1056 * Must be called exactly once before pci_init().
1057 */
1058int __init dino_init(void)
1059{
1060 register_parisc_driver(&dino_driver);
1061 return 0;
1062}
1063