Blame - arch/arm/mach-msm/Kconfig - kernel/msm

blob: 3612df734dede7593f8fc56a3e6af9006a6c07ce [file] [log] [blame]

Brian Swetland	1637de0	2008-09-09 07:13:33 -0700	[diff] [blame]	1	if ARCH_MSM
Brian Swetland	9e73c84	2007-11-26 04:12:13 -0800	[diff] [blame]	2
Stepan Moskovchenko	1cd286f	2011-08-03 19:03:02 -0700	[diff] [blame]	3	menu "MSM SoC Type"
Daniel Walker	bf83de4	2010-03-16 16:29:44 -0700	[diff] [blame]	4
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	5	config ARCH_MSM7X01A
Daniel Walker	bf83de4	2010-03-16 16:29:44 -0700	[diff] [blame]	6	bool "MSM7x00A / MSM7x01A"
				7	select ARCH_MSM_ARM11
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	8	select MSM_VIC
Daniel Walker	bf83de4	2010-03-16 16:29:44 -0700	[diff] [blame]	9	select CPU_V6
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	10	select MSM_REMOTE_SPINLOCK_SWP
				11
				12	config ARCH_MSM7X25
				13	bool "MSM7x25"
				14	select ARCH_MSM_ARM11
				15	select MSM_VIC
				16	select CPU_V6
				17	select MSM_REMOTE_SPINLOCK_SWP
				18
				19	config ARCH_MSM7X27
				20	bool "MSM7x27"
				21	select ARCH_MSM_ARM11 if MSM_SOC_REV_NONE
				22	select ARCH_HAS_BARRIERS if MSM_SOC_REV_NONE
				23	select ARCH_MSM_CORTEX_A5 if MSM_SOC_REV_A
				24	select MSM_VIC
				25	select CPU_V6 if MSM_SOC_REV_NONE
				26	select CPU_V7 if MSM_SOC_REV_A
				27	select MSM_REMOTE_SPINLOCK_SWP if MSM_SOC_REV_NONE
				28	select MSM_GPIOMUX
				29	select REGULATOR
Daniel Walker	bf83de4	2010-03-16 16:29:44 -0700	[diff] [blame]	30
Daniel Walker	7b52161	2010-05-06 12:44:57 -0700	[diff] [blame]	31	config ARCH_MSM7X30
				32	bool "MSM7x30"
				33	select ARCH_MSM_SCORPION
Daniel Walker	7b52161	2010-05-06 12:44:57 -0700	[diff] [blame]	34	select MSM_VIC
				35	select CPU_V7
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	36	select MSM_REMOTE_SPINLOCK_DEKKERS
				37	select ARCH_SPARSEMEM_ENABLE
Laura Abbott	78593b5	2011-09-26 18:48:14 -0700	[diff] [blame]	38	select ARCH_HAS_HOLES_MEMORYMODEL
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	39	select MEMORY_HOTPLUG
				40	select MEMORY_HOTREMOVE
				41	select MIGRATION
				42	select ARCH_MEMORY_PROBE
				43	select ARCH_MEMORY_REMOVE
				44	select DONT_RESERVE_FROM_MOVABLE_ZONE
Gregory Bean	ab78cde	2010-09-01 16:26:12 -0700	[diff] [blame]	45	select MSM_GPIOMUX
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	46	select RESERVE_FIRST_PAGE
				47	select MSM_DALRPC
				48	select MSM_SPM_V1
				49	select REGULATOR
Justin Paupore	637a25d	2011-07-14 17:11:04 -0700	[diff] [blame]	50	select MSM_PROC_COMM_REGULATOR
Daniel Walker	7b52161	2010-05-06 12:44:57 -0700	[diff] [blame]	51
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	52	config ARCH_QSD8X50
				53	bool "QSD8X50"
				54	select ARCH_MSM_SCORPION
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	55	select MSM_VIC
				56	select CPU_V7
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	57	select MSM_REMOTE_SPINLOCK_LDREX
				58	select CPU_USE_DOMAINS
				59	select EMULATE_DOMAIN_MANAGER_V7
Gregory Bean	ab78cde	2010-09-01 16:26:12 -0700	[diff] [blame]	60	select MSM_GPIOMUX
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	61	select MSM_DALRPC
Daniel Walker	46fe5f2	2010-08-18 11:00:25 -0700	[diff] [blame]	62
Jeff Ohlstein	569fb6e	2010-08-12 13:02:56 -0700	[diff] [blame]	63	config ARCH_MSM8X60
				64	bool "MSM8X60"
Jeff Ohlstein	e14411d	2010-11-30 13:06:36 -0800	[diff] [blame]	65	select ARCH_MSM_SCORPIONMP
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	66	select SMP_PARALLEL_START if SMP
Jeff Ohlstein	569fb6e	2010-08-12 13:02:56 -0700	[diff] [blame]	67	select ARM_GIC
				68	select CPU_V7
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	69	select MSM_REMOTE_SPINLOCK_LDREX
				70	select ARCH_REQUIRE_GPIOLIB
				71	select MSM_ADM3
				72	select REGULATOR
Jeff Ohlstein	569fb6e	2010-08-12 13:02:56 -0700	[diff] [blame]	73	select MSM_V2_TLMM
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	74	select MSM_PIL
				75	select MSM_SCM
				76	select ARCH_HAS_CPU_IDLE_WAIT
				77	select MSM_DIRECT_SCLK_ACCESS
				78	select MSM_RPM
				79	select MSM_XO
Jeff Ohlstein	569fb6e	2010-08-12 13:02:56 -0700	[diff] [blame]	80	select MSM_GPIOMUX
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	81	select MSM_BUS_SCALING
				82	select MSM_SECURE_IO
				83	select MSM_DALRPC
				84	select MSM_QDSP6_APR
				85	select MSM_NATIVE_RESTART
				86	select ARCH_INLINE_SPIN_TRYLOCK
				87	select ARCH_INLINE_SPIN_TRYLOCK_BH
				88	select ARCH_INLINE_SPIN_LOCK
				89	select ARCH_INLINE_SPIN_LOCK_BH
				90	select ARCH_INLINE_SPIN_LOCK_IRQ
				91	select ARCH_INLINE_SPIN_LOCK_IRQSAVE
				92	select ARCH_INLINE_SPIN_UNLOCK
				93	select ARCH_INLINE_SPIN_UNLOCK_BH
				94	select ARCH_INLINE_SPIN_UNLOCK_IRQ
				95	select ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE
				96	select ARCH_INLINE_READ_TRYLOCK
				97	select ARCH_INLINE_READ_LOCK
				98	select ARCH_INLINE_READ_LOCK_BH
				99	select ARCH_INLINE_READ_LOCK_IRQ
				100	select ARCH_INLINE_READ_LOCK_IRQSAVE
				101	select ARCH_INLINE_READ_UNLOCK
				102	select ARCH_INLINE_READ_UNLOCK_BH
				103	select ARCH_INLINE_READ_UNLOCK_IRQ
				104	select ARCH_INLINE_READ_UNLOCK_IRQRESTORE
				105	select ARCH_INLINE_WRITE_TRYLOCK
				106	select ARCH_INLINE_WRITE_LOCK
				107	select ARCH_INLINE_WRITE_LOCK_BH
				108	select ARCH_INLINE_WRITE_LOCK_IRQ
				109	select ARCH_INLINE_WRITE_LOCK_IRQSAVE
				110	select ARCH_INLINE_WRITE_UNLOCK
				111	select ARCH_INLINE_WRITE_UNLOCK_BH
				112	select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE
				113	select CPU_HAS_L2_PMU
				114	select MSM_SPM_V1
Jeff Ohlstein	569fb6e	2010-08-12 13:02:56 -0700	[diff] [blame]	115
Stepan Moskovchenko	f441ca2	2010-12-01 19:31:16 -0800	[diff] [blame]	116	config ARCH_MSM8960
				117	bool "MSM8960"
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	118	select ARCH_MSM_KRAITMP
Stepan Moskovchenko	f441ca2	2010-12-01 19:31:16 -0800	[diff] [blame]	119	select ARM_GIC
				120	select CPU_V7
				121	select MSM_V2_TLMM
				122	select MSM_GPIOMUX
				123	select MSM_SCM if SMP
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	124	select MSM_DIRECT_SCLK_ACCESS
				125	select REGULATOR
				126	select MSM_RPM
				127	select MSM_XO
				128	select MSM_QDSP6_APR
				129	select MSM_PIL
				130	select MSM_AUDIO_QDSP6 if SND_SOC
				131	select CPU_HAS_L2_PMU
				132	select MSM_SPM_V2
				133	select MSM_L2_SPM
				134	select MSM_NATIVE_RESTART
Larry Bassel	cf1fae5	2011-08-30 15:14:29 -0700	[diff] [blame]	135	select ARCH_SPARSEMEM_ENABLE
				136	select ARCH_HAS_HOLES_MEMORYMODEL
				137	select MEMORY_HOTPLUG
				138	select MEMORY_HOTREMOVE
				139	select MIGRATION
				140	select ARCH_MEMORY_PROBE
				141	select ARCH_MEMORY_REMOVE
				142	select DONT_RESERVE_FROM_MOVABLE_ZONE
Larry Bassel	9670672	2011-09-20 14:36:14 -0700	[diff] [blame]	143	select DONT_MAP_HOLE_AFTER_MEMBANK0
Eric Holmberg	eab1073	2011-09-23 19:44:43 -0600	[diff] [blame]	144	select MSM_REMOTE_SPINLOCK_SFPB
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	145
				146	config ARCH_APQ8064
				147	bool "APQ8064"
				148	select ARCH_MSM_KRAITMP
Stepan Moskovchenko	d256ddf	2011-09-08 12:34:46 -0700	[diff] [blame]	149	select MACH_APQ8064_SIM if !MACH_APQ8064_RUMI3
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	150	select MSM_V2_TLMM
				151	select ARM_GIC
				152	select CPU_V7
				153	select MSM_SCM if SMP
Joel King	4ebccc6	2011-07-22 09:43:22 -0700	[diff] [blame]	154	select MSM_GPIOMUX
Eric Holmberg	40d2188	2011-09-27 09:42:03 -0600	[diff] [blame]	155	select MSM_REMOTE_SPINLOCK_SFPB
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	156
				157	config ARCH_FSM9XXX
				158	bool "FSM9XXX"
				159	select ARCH_MSM_SCORPION
				160	select MSM_VIC
				161	select CPU_V7
				162	select MSM_REMOTE_SPINLOCK_LDREX
				163	select FSM9XXX_TLMM
Stepan Moskovchenko	f441ca2	2010-12-01 19:31:16 -0800	[diff] [blame]	164
Rohit Vaswani	ddeb52a	2011-08-16 12:26:32 -0700	[diff] [blame]	165	config ARCH_MSM9615
				166	bool "MSM9615"
				167	select ARM_GIC
				168	select ARCH_MSM_CORTEX_A5
				169	select CPU_V7
				170	select MSM_V2_TLMM
				171	select MSM_GPIOMUX
Stepan Moskovchenko	1cd286f	2011-08-03 19:03:02 -0700	[diff] [blame]	172	endmenu
Daniel Walker	bf83de4	2010-03-16 16:29:44 -0700	[diff] [blame]	173
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	174	choice
				175	prompt "MSM SoC Revision"
				176	default MSM_SOC_REV_NONE
				177	config MSM_SOC_REV_NONE
				178	bool "N/A"
				179	select EMULATE_DOMAIN_MANAGER_V7 if ARCH_QSD8X50
				180	select VERIFY_PERMISSION_FAULT if ARCH_QSD8X50
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	181	config MSM_SOC_REV_A
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	182	bool "Rev. A"
				183	select ARCH_MSM7X27A if ARCH_MSM7X27
				184	endchoice
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	185
Stepan Moskovchenko	00da074	2011-07-08 14:06:44 -0700	[diff] [blame]	186	config MSM_KRAIT_TBB_ABORT_HANDLER
				187	bool "Krait TBB/TBH data abort handler"
				188	depends on ARCH_MSM_KRAIT
				189	depends on ARM_THUMB
				190	help
				191	Certain early samples of the Krait processor may generate data
				192	aborts for TBB / TBH instructions that fail their condition code
				193	checks. Enabling this option will ignore these erroneous data aborts,
				194	at the expense of a very small performance penalty.
				195
				196	If unsure, say N.
				197
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	198	config ARCH_MSM_ARM11
				199	bool
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	200
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	201	config ARCH_MSM_SCORPION
Daniel Walker	bf83de4	2010-03-16 16:29:44 -0700	[diff] [blame]	202	bool
				203
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	204	config ARCH_MSM_KRAIT
Daniel Walker	46fe5f2	2010-08-18 11:00:25 -0700	[diff] [blame]	205	bool
				206
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	207	config MSM_SMP
				208	bool
				209
				210	config ARCH_MSM_SCORPIONMP
				211	select ARCH_MSM_SCORPION
				212	select MSM_SMP
				213	bool
				214
				215	config ARCH_MSM_KRAITMP
				216	select ARCH_MSM_KRAIT
				217	select MSM_SMP
				218	bool
				219
				220	config ARCH_MSM_CORTEX_A5
				221	bool
				222	select HAVE_HW_BRKPT_RESERVED_RW_ACCESS
				223
				224	config ARCH_MSM7X27A
				225	bool
				226	select MSM_DALRPC
Justin Paupore	b3a33b7	2011-08-23 15:30:32 -0700	[diff] [blame]	227	select MSM_PROC_COMM_REGULATOR
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	228
Gregory Bean	f9f3d31	2010-04-30 22:06:50 -0700	[diff] [blame]	229	config MSM_VIC
				230	bool
Daniel Walker	bf83de4	2010-03-16 16:29:44 -0700	[diff] [blame]	231
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	232	config MSM_RPM
				233	bool "Resource Power Manager"
				234	select MSM_MPM
				235
				236	config MSM_MPM
				237	bool "Modem Power Manager"
				238
				239	config MSM_XO
				240	bool
				241
				242	config MSM_REMOTE_SPINLOCK_DEKKERS
				243	bool
				244	config MSM_REMOTE_SPINLOCK_SWP
				245	bool
				246	config MSM_REMOTE_SPINLOCK_LDREX
				247	bool
Eric Holmberg	eab1073	2011-09-23 19:44:43 -0600	[diff] [blame]	248	config MSM_REMOTE_SPINLOCK_SFPB
				249	bool
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	250	config MSM_ADM3
				251	bool
				252
				253	menu "MSM Board Selection"
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	254
				255	config MACH_HALIBUT
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	256	depends on ARCH_MSM7X01A
				257	depends on MSM_STACKED_MEMORY
				258	default y
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	259	bool "Halibut Board (QCT SURF7201A)"
				260	help
				261	Support for the Qualcomm SURF7201A eval board.
				262
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	263	config MACH_MSM7201A_SURF
				264	depends on ARCH_MSM7X01A
				265	depends on MSM_STACKED_MEMORY
				266	default y
				267	bool "MSM7201A SURF"
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	268	help
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	269	Support for the Qualcomm MSM7201A SURF eval board.
				270
				271	config MACH_MSM7201A_FFA
				272	depends on ARCH_MSM7X01A
				273	depends on MSM_STACKED_MEMORY
				274	default y
				275	bool "MSM7201A FFA"
				276	help
				277	Support for the Qualcomm MSM7201A FFA eval board.
				278
				279	config MACH_TROUT
				280	depends on ARCH_MSM7X01A
				281	depends on MSM_STACKED_MEMORY
				282	default y
				283	bool "Trout"
				284
				285	config MACH_MSM7X27_SURF
				286	depends on ARCH_MSM7X27
				287	depends on !MSM_STACKED_MEMORY
				288	default y
				289	bool "MSM7x27 SURF"
				290	help
				291	Support for the Qualcomm MSM7x27 SURF eval board.
				292
				293	config MACH_MSM7X27_FFA
				294	depends on ARCH_MSM7X27
				295	depends on !MSM_STACKED_MEMORY
				296	default y
				297	bool "MSM7x27 FFA"
				298	help
				299	Support for the Qualcomm MSM7x27 FFA eval board.
				300
				301	config MACH_MSM7X27A_RUMI3
				302	depends on ARCH_MSM7X27A
				303	depends on !MSM_STACKED_MEMORY
				304	default y
				305	bool "MSM7x27A RUMI3"
				306	help
				307	Support for the Qualcomm MSM7x27A RUMI3 Emulation Platform.
				308
				309	config MACH_MSM7X27A_SURF
				310	depends on ARCH_MSM7X27A
				311	depends on !MSM_STACKED_MEMORY
				312	default y
				313	bool "MSM7x27A SURF"
				314	help
				315	Support for the Qualcomm MSM7x27A SURF.
				316
				317	config MACH_MSM7X27A_FFA
				318	depends on ARCH_MSM7X27A
				319	depends on !MSM_STACKED_MEMORY
				320	default y
				321	bool "MSM7x27A FFA"
				322	help
				323	Support for the Qualcomm MSM7x27A FFA.
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	324
Trilok Soni	3d0f6c5	2011-07-26 16:06:58 +0530	[diff] [blame]	325	config MACH_MSM7625A_SURF
				326	depends on ARCH_MSM7X27A
				327	depends on !MSM_STACKED_MEMORY
				328	default y
				329	bool "MSM7625A SURF"
				330	help
				331	Support for the Qualcomm MSM7625A SURF.
				332
				333	config MACH_MSM7625A_FFA
				334	depends on ARCH_MSM7X27A
				335	depends on !MSM_STACKED_MEMORY
				336	default y
				337	bool "MSM7625A FFA"
				338	help
				339	Support for the Qualcomm MSM7625A FFA.
				340
Daniel Walker	7b52161	2010-05-06 12:44:57 -0700	[diff] [blame]	341	config MACH_MSM7X30_SURF
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	342	depends on ARCH_MSM7X30
				343	depends on !MSM_STACKED_MEMORY
				344	default y
				345	bool "MSM7x30 SURF"
				346	help
				347	Support for the Qualcomm MSM7x30 SURF eval board.
				348
				349	config MACH_MSM7X30_FFA
				350	depends on ARCH_MSM7X30
				351	depends on !MSM_STACKED_MEMORY
				352	default y
				353	bool "MSM7x30 FFA"
				354	help
				355	Support for the Qualcomm MSM7x30 FFA eval board.
				356
				357	config MACH_MSM7X30_FLUID
				358	depends on ARCH_MSM7X30
				359	depends on !MSM_STACKED_MEMORY
				360	default y
				361	bool "MSM7x30 FLUID"
				362	help
				363	Support for the Qualcomm MSM7x30 FLUID eval board.
				364
				365	config MACH_SAPPHIRE
				366	depends on ARCH_MSM7X01A
				367	default n
				368	bool "Sapphire"
Daniel Walker	7b52161	2010-05-06 12:44:57 -0700	[diff] [blame]	369
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	370	config MACH_QSD8X50_SURF
				371	depends on ARCH_QSD8X50
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	372	depends on MSM_SOC_REV_NONE
				373	depends on MSM_STACKED_MEMORY
				374	default y
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	375	bool "QSD8x50 SURF"
				376	help
				377	Support for the Qualcomm QSD8x50 SURF eval board.
				378
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	379	config MACH_QSD8X50_FFA
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	380	depends on ARCH_QSD8X50
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	381	depends on MSM_SOC_REV_NONE
				382	depends on MSM_STACKED_MEMORY
				383	default y
				384	bool "QSD8x50 FFA"
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	385	help
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	386	Support for the Qualcomm QSD8x50 FFA eval board.
				387
				388	config MACH_MSM7X25_SURF
				389	depends on ARCH_MSM7X25
				390	depends on !MSM_STACKED_MEMORY
				391	default y
				392	bool "MSM7x25 SURF"
				393	help
				394	Support for the Qualcomm MSM7x25 SURF eval board.
				395
				396	config MACH_MSM7X25_FFA
				397	depends on ARCH_MSM7X25
				398	depends on !MSM_STACKED_MEMORY
				399	default y
				400	bool "MSM7x25 FFA"
				401	help
				402	Support for the Qualcomm MSM7x25 FFA eval board.
				403
				404	config MACH_MSM8X55_SURF
				405	depends on ARCH_MSM7X30
				406	depends on !MSM_STACKED_MEMORY
				407	default y
				408	bool "MSM8X55 SURF"
				409	help
				410	Support for the Qualcomm MSM8x55 SURF eval board.
				411
				412	config MACH_MSM8X55_FFA
				413	depends on ARCH_MSM7X30
				414	depends on !MSM_STACKED_MEMORY
				415	default y
				416	bool "MSM8X55 FFA"
				417	help
				418	Support for the Qualcomm MSM8x55 FFA eval board.
				419
				420	config MACH_MSM8X55_SVLTE_FFA
				421	depends on ARCH_MSM7X30
				422	depends on !MSM_STACKED_MEMORY
				423	default y
				424	bool "MSM8X55 SVLTE FFA"
				425	help
				426	Support for the Qualcomm MSM8x55 SVLTE FFA eval board.
				427
				428	config MACH_MSM8X55_SVLTE_SURF
				429	depends on ARCH_MSM7X30
				430	depends on !MSM_STACKED_MEMORY
				431	default y
				432	bool "MSM8X55 SVLTE SURF"
				433	help
				434	Support for the Qualcomm MSM8x55 SVLTE SURF eval board.
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	435
Steve Muckle	a55df6e	2010-01-07 12:43:24 -0800	[diff] [blame]	436	config MACH_MSM8X60_RUMI3
				437	depends on ARCH_MSM8X60
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	438	default n
Steve Muckle	a55df6e	2010-01-07 12:43:24 -0800	[diff] [blame]	439	bool "MSM8x60 RUMI3"
				440	help
				441	Support for the Qualcomm MSM8x60 RUMI3 emulator.
				442
Steve Muckle	57bbf1c	2010-01-07 12:51:10 -0800	[diff] [blame]	443	config MACH_MSM8X60_SIM
				444	depends on ARCH_MSM8X60
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	445	default n
Steve Muckle	57bbf1c	2010-01-07 12:51:10 -0800	[diff] [blame]	446	bool "MSM8x60 Simulator"
				447	help
				448	Support for the Qualcomm MSM8x60 simulator.
				449
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	450	config MACH_MSM8X60_SURF
				451	depends on ARCH_MSM8X60
				452	default n
				453	bool "MSM8x60 SURF"
				454	help
				455	Support for the Qualcomm MSM8x60 SURF eval board.
				456
Gregory Bean	69b7f6f	2010-04-04 22:29:02 -0700	[diff] [blame]	457	config MACH_MSM8X60_FFA
				458	depends on ARCH_MSM8X60
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	459	default n
Gregory Bean	69b7f6f	2010-04-04 22:29:02 -0700	[diff] [blame]	460	bool "MSM8x60 FFA"
				461	help
				462	Support for the Qualcomm MSM8x60 FFA eval board.
				463
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	464	config MACH_MSM8X60_FLUID
				465	depends on ARCH_MSM8X60
				466	default n
				467	bool "MSM8x60 FLUID"
				468	help
				469	Support for the Qualcomm MSM8x60 FLUID platform. The FLUID is an
				470	8x60 target which has a form factor that is much closer to that
				471	of a phone than other targets. It also has a new display and
				472	touchscreen controller.
				473
				474	config MACH_MSM8X60_FUSION
				475	depends on ARCH_MSM8X60
				476	default n
				477	bool "MSM8x60 FUSION"
				478	help
				479	Support for the Qualcomm MSM8x60 Fusion SURF device.
				480
				481	config MACH_MSM8X60_FUSN_FFA
				482	depends on ARCH_MSM8X60
				483	default n
				484	bool "MSM8x60 FUSN FFA"
				485	help
				486	Support for the Qualcomm MSM8x60 Fusion FFA device.
				487
Zhang Chang Ken	ef05b17	2011-07-27 15:28:13 -0400	[diff] [blame]	488	config MACH_MSM8X60_DRAGON
				489	depends on ARCH_MSM8X60
				490	default n
				491	bool "MSM8x60 DRAGON"
				492	help
				493	Support for the Qualcomm MSM8x60 Dragon board.
				494
Stepan Moskovchenko	f441ca2	2010-12-01 19:31:16 -0800	[diff] [blame]	495	config MACH_MSM8960_SIM
				496	depends on ARCH_MSM8960
				497	bool "MSM8960 Simulator"
				498	help
				499	Support for the Qualcomm MSM8960 simulator.
				500
Stepan Moskovchenko	50ede4e	2010-12-13 18:12:19 -0800	[diff] [blame]	501	config MACH_MSM8960_RUMI3
				502	depends on ARCH_MSM8960
				503	bool "MSM8960 RUMI3"
				504	help
				505	Support for the Qualcomm MSM8960 RUMI3 emulator.
				506
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	507	config MACH_MSM8960_CDP
				508	depends on ARCH_MSM8960
				509	bool "MSM8960 CDP"
				510	help
				511	Support for the Qualcomm MSM8960 CDP device.
				512
				513	config MACH_MSM8960_MTP
				514	depends on ARCH_MSM8960
				515	bool "MSM8960 MTP"
				516	help
				517	Support for the Qualcomm MSM8960 MTP device.
				518
				519	config MACH_MSM8960_FLUID
				520	depends on ARCH_MSM8960
				521	bool "MSM8960 FLUID"
				522	help
				523	Support for the Qualcomm MSM8960 FLUID device.
				524
Amir Samuelov	0d1f8ae	2011-07-28 11:13:58 +0300	[diff] [blame]	525	config MACH_MSM8960_LIQUID
				526	depends on ARCH_MSM8960
				527	bool "MSM8960 LIQUID"
				528	help
				529	Support for the Qualcomm MSM8960 LIQUID device.
				530
Rohit Vaswani	a8e7a83	2011-09-28 21:00:05 -0700	[diff] [blame]	531	config MACH_MSM9615_CDP
				532	depends on ARCH_MSM9615
				533	bool "MSM9615 CDP"
				534	help
				535	Support for the Qualcomm MSM9615 CDP device.
				536
				537	config MACH_MSM9615_MTP
				538	depends on ARCH_MSM9615
				539	bool "MSM9615 MTP"
				540	help
				541	Support for the Qualcomm MSM9615 MTP device.
				542
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	543	config MSM_USE_TSIF1
				544	depends on ARCH_MSM8X60
				545	bool "MSM8x60 use TSIF1"
				546	help
				547	Selects TSIF1 core to be used rather than TSIF0.
				548	The two TSIF cores share the same DM configuration
				549	so they cannot be used simultaneously.
				550
				551	config MACH_APQ8064_SIM
				552	depends on ARCH_APQ8064
				553	bool "APQ8064 Simulator"
				554	help
				555	Support for the Qualcomm APQ8064 simulator.
				556
Stepan Moskovchenko	d256ddf	2011-09-08 12:34:46 -0700	[diff] [blame]	557	config MACH_APQ8064_RUMI3
				558	depends on ARCH_APQ8064
				559	bool "APQ8064 RUMI3"
				560	help
				561	Support for the Qualcomm APQ8064 RUMI3 emulator.
				562
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	563	config MACH_FSM9XXX_SURF
				564	depends on ARCH_FSM9XXX
				565	depends on !MSM_STACKED_MEMORY
				566	default y
				567	bool "FSM9XXX SURF"
				568	help
				569	Support for the Qualcomm FSM9xxx femtocell
				570	chipset based SURF evaluation board and
				571	FFA board.
				572
Daniel Walker	4ad15e6	2010-05-06 13:54:17 -0700	[diff] [blame]	573	endmenu
Brian Swetland	9e73c84	2007-11-26 04:12:13 -0800	[diff] [blame]	574
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	575	config MSM_STACKED_MEMORY
				576	bool "Stacked Memory"
				577	default y
Stepan Moskovchenko	24f6173	2011-02-11 12:28:16 -0800	[diff] [blame]	578	help
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	579	This option is used to indicate the presence of on-die stacked
				580	memory. When present this memory bank is used for a high speed
				581	shared memory interface. When not present regular RAM is used.
Stepan Moskovchenko	24f6173	2011-02-11 12:28:16 -0800	[diff] [blame]	582
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	583	config PHYS_OFFSET
				584	hex
Rohit Vaswani	ddeb52a	2011-08-16 12:26:32 -0700	[diff] [blame]	585	default "0x40800000" if ARCH_MSM9615
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	586	default "0x80200000" if ARCH_APQ8064
				587	default "0x80200000" if ARCH_MSM8960
				588	default "0x10000000" if ARCH_FSM9XXX
				589	default "0x00200000" if !MSM_STACKED_MEMORY
				590	default "0x00000000" if ARCH_QSD8X50 && MSM_SOC_REV_A
				591	default "0x20000000" if ARCH_QSD8X50
				592	default "0x40200000" if ARCH_MSM8X60
				593	default "0x10000000"
Stepan Moskovchenko	24f6173	2011-02-11 12:28:16 -0800	[diff] [blame]	594
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	595	config KERNEL_PMEM_EBI_REGION
				596	bool "Enable in-kernel PMEM region for EBI"
				597	default y if ARCH_MSM8X60
				598	depends on ANDROID_PMEM && (ARCH_MSM8X60 \|\| ARCH_MSM8960)
				599	help
				600	Enable the in-kernel PMEM allocator to use EBI memory.
				601
				602	config KERNEL_PMEM_SMI_REGION
				603	bool "Enable in-kernel PMEM region for SMI"
				604	default y if ARCH_MSM8X60
				605	depends on ANDROID_PMEM && ((ARCH_QSD8X50 && !PMEM_GPU0) \|\| (ARCH_MSM8X60 && !VCM))
				606	help
				607	Enable the in-kernel PMEM allocator to use SMI memory.
				608
				609	config PMEM_GPU0
				610	bool "Enable PMEM GPU0 region"
				611	default y
				612	depends on ARCH_QSD8X50 && ANDROID_PMEM
				613	help
				614	Enable the PMEM GPU0 device on SMI Memory.
				615
				616	config MSM_AMSS_VERSION
				617	int
				618	default 6210 if MSM_AMSS_VERSION_6210
				619	default 6220 if MSM_AMSS_VERSION_6220
				620	default 6225 if MSM_AMSS_VERSION_6225
				621
				622	choice
				623	prompt "AMSS modem firmware version"
				624
				625	default MSM_AMSS_VERSION_6225
				626
				627	config MSM_AMSS_VERSION_6210
				628	bool "6.2.10"
				629
				630	config MSM_AMSS_VERSION_6220
				631	bool "6.2.20"
				632
				633	config MSM_AMSS_VERSION_6225
				634	bool "6.2.20 + New ADSP"
				635	endchoice
Stepan Moskovchenko	2607b0a	2010-11-15 17:46:10 -0800	[diff] [blame]	636
Pavel Machek	6339f66	2009-11-02 11:48:29 +0100	[diff] [blame]	637	config MSM_DEBUG_UART
				638	int
				639	default 1 if MSM_DEBUG_UART1
				640	default 2 if MSM_DEBUG_UART2
				641	default 3 if MSM_DEBUG_UART3
				642
				643	choice
				644	prompt "Debug UART"
				645
				646	default MSM_DEBUG_UART_NONE
				647
				648	config MSM_DEBUG_UART_NONE
				649	bool "None"
				650
				651	config MSM_DEBUG_UART1
				652	bool "UART1"
				653
				654	config MSM_DEBUG_UART2
				655	bool "UART2"
				656
				657	config MSM_DEBUG_UART3
				658	bool "UART3"
				659	endchoice
				660
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	661	choice
				662	prompt "Default Timer"
				663	default MSM7X00A_USE_GP_TIMER
				664
				665	config MSM7X00A_USE_GP_TIMER
				666	bool "GP Timer"
				667	help
				668	Low resolution timer that allows power collapse from idle.
				669
				670	config MSM7X00A_USE_DG_TIMER
				671	bool "DG Timer"
				672	help
				673	High resolution timer.
				674	endchoice
				675
				676	choice
				677	prompt "Suspend sleep mode"
				678	default MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
				679	help
				680	Allows overriding the sleep mode used. Leave at power
				681	collapse suspend unless the arm9 image has problems.
				682
				683	config MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
				684	bool "Power collapse suspend"
				685	help
				686	Lowest sleep state. Returns through reset vector.
				687
				688	config MSM7X00A_SLEEP_MODE_POWER_COLLAPSE
				689	bool "Power collapse"
				690	help
				691	Sleep state that returns through reset vector.
				692
				693	config MSM7X00A_SLEEP_MODE_APPS_SLEEP
				694	bool "Apps Sleep"
				695
				696	config MSM7X00A_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
				697	bool "Ramp down cpu clock and wait for interrupt"
				698
				699	config MSM7X00A_SLEEP_WAIT_FOR_INTERRUPT
				700	bool "Wait for interrupt"
				701	endchoice
				702
				703	config MSM7X00A_SLEEP_MODE
				704	int
				705	default 0 if MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
				706	default 1 if MSM7X00A_SLEEP_MODE_POWER_COLLAPSE
				707	default 2 if MSM7X00A_SLEEP_MODE_APPS_SLEEP
				708	default 3 if MSM7X00A_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
				709	default 4 if MSM7X00A_SLEEP_WAIT_FOR_INTERRUPT
				710
				711	choice
				712	prompt "Idle sleep mode"
				713	default MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE
				714	help
				715	Allows overriding the sleep mode used from idle. Leave at power
				716	collapse suspend unless the arm9 image has problems.
				717
				718	config MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
				719	bool "Power collapse suspend"
				720	help
				721	Lowest sleep state. Returns through reset vector.
				722
				723	config MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE
				724	bool "Power collapse"
				725	help
				726	Sleep state that returns through reset vector.
				727
				728	config MSM7X00A_IDLE_SLEEP_MODE_APPS_SLEEP
				729	bool "Apps Sleep"
				730
				731	config MSM7X00A_IDLE_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
				732	bool "Ramp down cpu clock and wait for interrupt"
				733
				734	config MSM7X00A_IDLE_SLEEP_WAIT_FOR_INTERRUPT
				735	bool "Wait for interrupt"
				736	endchoice
				737
				738	config MSM7X00A_IDLE_SLEEP_MODE
				739	int
				740	default 0 if MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
				741	default 1 if MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE
				742	default 2 if MSM7X00A_IDLE_SLEEP_MODE_APPS_SLEEP
				743	default 3 if MSM7X00A_IDLE_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
				744	default 4 if MSM7X00A_IDLE_SLEEP_WAIT_FOR_INTERRUPT
				745
				746	config MSM7X00A_IDLE_SLEEP_MIN_TIME
				747	int "Minimum idle time before sleep"
				748	default 20000000
				749	help
				750	Minimum idle time in nanoseconds before entering low power mode.
				751
				752	config MSM7X00A_IDLE_SPIN_TIME
				753	int "Idle spin time before cpu ramp down"
				754	default 80000
				755	help
				756	Spin time in nanoseconds before ramping down cpu clock and entering
				757	any low power state.
				758
				759	menuconfig MSM_IDLE_STATS
				760	bool "Collect idle statistics"
				761	default y
				762	help
				763	Collect idle statistics and export them in proc/msm_pm_stats.
				764
				765	if MSM_IDLE_STATS
				766
				767	config MSM_IDLE_STATS_FIRST_BUCKET
				768	int "First bucket time"
				769	default 62500
				770	help
				771	Upper time limit in nanoseconds of first bucket.
				772
				773	config MSM_IDLE_STATS_BUCKET_SHIFT
				774	int "Bucket shift"
				775	default 2
				776
				777	config MSM_IDLE_STATS_BUCKET_COUNT
				778	int "Bucket count"
				779	default 10
				780
				781	config MSM_SUSPEND_STATS_FIRST_BUCKET
				782	int "First bucket time for suspend"
				783	default 1000000000
				784	help
				785	Upper time limit in nanoseconds of first bucket of the
				786	histogram. This is for collecting statistics on suspend.
				787
				788	endif # MSM_IDLE_STATS
				789
				790	config CPU_HAS_L2_PMU
				791	bool "L2CC PMU Support"
				792	help
				793	Select this if the L2 cache controller has a Performance Monitoring Unit.
				794
				795	config MSM_JTAG_V7
				796	depends on CPU_V7
				797	default y if DEBUG_KERNEL
				798	bool "JTAG debug support"
				799	help
				800	Add additional support for JTAG kernel debugging.
				801
				802	config HTC_HEADSET
				803	tristate "HTC 2 Wire detection driver"
				804	default n
				805	help
				806	Provides support for detecting HTC 2 wire devices, such as wired
				807	headset, on the trout platform. Can be used with the msm serial
				808	debugger, but not with serial console.
				809
				810	config TROUT_BATTCHG
				811	depends on MACH_TROUT && POWER_SUPPLY
				812	default y
				813	bool "Trout battery / charger driver"
				814
				815	config HTC_PWRSINK
				816	depends on MSM_SMD
				817	default n
				818	bool "HTC Power Sink Driver"
				819
				820	config QSD_SVS
				821	bool "QSD Static Voltage Scaling"
				822	depends on (MACH_QSD8X50_SURF \|\| MACH_QSD8X50_FFA)
				823	default y
				824	select TPS65023
				825	help
				826	Enables static voltage scaling using the TPS65023 PMIC.
				827
				828	config QSD_PMIC_DEFAULT_DCDC1
				829	int "PMIC default output voltage"
				830	depends on (MACH_QSD8X50_SURF \|\| MACH_QSD8X50_FFA)
				831	default 1250
				832	help
				833	This is the PMIC voltage at Linux kernel boot.
				834
				835	config MSM_FIQ_SUPPORT
				836	default y
				837	bool "Enable installation of an FIQ handler."
				838
				839	config MSM_SERIAL_DEBUGGER
				840	select MSM_FIQ_SUPPORT
				841	select KERNEL_DEBUGGER_CORE
				842	default n
				843	bool "FIQ Mode Serial Debugger"
				844	help
				845	The FIQ serial debugger can accept commands even when the
				846	kernel is unresponsive due to being stuck with interrupts
				847	disabled. Depends on the kernel debugger core in drivers/misc.
				848
				849	config MSM_SERIAL_DEBUGGER_CONSOLE
				850	depends on MSM_SERIAL_DEBUGGER
				851	default n
				852	bool "Console on FIQ Serial Debugger port"
				853	help
				854	Enables a console so that printk messages are displayed on
				855	the debugger serial port as the occur.
Daniel Walker	bf83de4	2010-03-16 16:29:44 -0700	[diff] [blame]	856
Steve Muckle	c8aabae	2010-04-21 16:20:27 -0700	[diff] [blame]	857	config MSM_PROC_COMM
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	858	default y
				859	bool "Proc-Comm RPC Interface"
				860	help
				861	Enables a lightweight communications interface to the
				862	baseband processor.
Steve Muckle	c8aabae	2010-04-21 16:20:27 -0700	[diff] [blame]	863
Brian Swetland	2eb44eb	2008-09-29 16:00:48 -0700	[diff] [blame]	864	config MSM_SMD
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	865	bool "MSM Shared Memory Driver (SMD)"
				866	help
				867	Support for the shared memory interface between the apps
				868	processor and the baseband processor. Provides access to
				869	the "shared heap", as well as virtual serial channels
				870	used to communicate with various services on the baseband
				871	processor.
				872
				873	choice
				874	prompt "MSM Shared memory interface version"
				875	depends on MSM_SMD
				876	default MSM_SMD_PKG3 if ARCH_MSM_ARM11
				877	default MSM_SMD_PKG4 if ARCH_MSM_SCORPION
				878
				879	config MSM_SMD_PKG3
				880	bool
				881	prompt "Package 3"
				882
				883	config MSM_SMD_PKG4
				884	bool
				885	prompt "Package 4"
				886	endchoice
				887
				888	config MSM_IPC_ROUTER_SMD_XPRT
				889	depends on MSM_SMD
				890	default n
				891	bool "MSM SMD XPRT Layer"
				892	help
				893	SMD Transport Layer for IPC Router
				894
				895	config MSM_RPC_SDIO_XPRT
				896	depends on MSM_SDIO_AL
				897	default y
				898	bool "MSM SDIO XPRT Layer"
				899	help
				900	SDIO Transport Layer for RPC Rouer
				901
				902	config MSM_RPC_SDIO_DEBUG
				903	depends on MSM_RPC_SDIO_XPRT
				904	default y
				905	bool "MSM SDIO XPRT debug support"
				906	help
				907	Support for debugging SDIO XPRT
				908
				909	config MSM_SMD_DEBUG
				910	depends on MSM_SMD
				911	default y
				912	bool "MSM SMD debug support"
				913	help
				914	Support for debugging the SMD for communication
				915	between the ARM9 and ARM11
				916
				917	config MSM_SDIO_AL
				918	depends on ((ARCH_MSM7X30 \|\| MACH_MSM8X60_FUSN_FFA \|\| MACH_TYPE_MSM8X60_FUSION) && HAS_WAKELOCK)
				919	default y
				920	tristate "SDIO-Abstraction-Layer"
				921	help
				922	Support MSM<->MDM Communication over SDIO bus.
				923	MDM SDIO-Client should have pipes support.
				924
				925	config MSM_SDIO_DMUX
				926	bool "SDIO Data Mux Driver"
				927	depends on MSM_SDIO_AL
				928	default n
				929	help
				930	Support Muxed Data Channels over SDIO interface.
				931
				932	config MSM_BAM_DMUX
				933	bool "BAM Data Mux Driver"
				934	depends on SPS
				935	default n
				936	help
				937	Support Muxed Data Channels over BAM interface.
				938	BAM has a limited number of pipes. This driver
				939	provides a means to support more logical channels
				940	via muxing than BAM could without muxing.
				941
				942	config MSM_N_WAY_SMD
				943	depends on (MSM_SMD && (ARCH_MSM_SCORPION \|\| ARCH_MSM8960 \|\| ARCH_MSM7X27 \|\| ARCH_MSM7X25))
				944	default y
				945	bool "MSM N-WAY SMD support"
				946	help
				947	Supports APPS-QDSP SMD communication along with
				948	normal APPS-MODEM SMD communication.
				949
				950	config MSM_N_WAY_SMSM
				951	depends on (MSM_SMD && (ARCH_MSM_SCORPION \|\| ARCH_MSM8960 \|\| ARCH_MSM7X27 \|\| ARCH_MSM7X25))
				952	default y
				953	bool "MSM N-WAY SMSM support"
				954	help
				955	Supports APPS-QDSP SMSM communication along with
				956	normal APPS-MODEM SMSM communication.
				957
				958	config MSM_RESET_MODEM
				959	tristate "Reset Modem Driver"
				960	depends on MSM_SMD
				961	default m
				962	help
				963	Allows the user to reset the modem through a device node.
				964
				965	config MSM_SMD_LOGGING
				966	depends on MSM_SMD
				967	default y
				968	bool "MSM Shared Memory Logger"
				969	help
				970	This option exposes the shared memory logger at /dev/smem_log
				971	and a debugfs node named smem_log.
				972
				973	If in doubt, say yes.
				974
				975	config MSM_SMD_NMEA
				976	bool "NMEA GPS Driver"
				977	depends on MSM_SMD
				978	default y
				979	help
				980	Enable this to support the NMEA GPS device.
				981
				982	If in doubt, say yes.
				983
				984	config MSM_SDIO_TTY
				985	bool "SDIO TTY Driver"
				986	depends on MSM_SDIO_AL
				987	default n
				988	help
				989	Provides a TTY driver SDIO TTY
				990	This driver can be used by user space
				991	applications for passing data through the
				992	SDIO interface.
				993
				994	config MSM_SMD_TTY
				995	bool "SMD TTY Driver"
				996	depends on MSM_SMD
				997	default y
				998	help
				999	Provides TTY interfaces to interact with the modem.
				1000
				1001	If in doubt, say yes.
				1002
				1003	config MSM_SMD_QMI
				1004	bool "SMD QMI Driver"
				1005	depends on MSM_SMD
				1006	default y
				1007	help
				1008	Manages network data connections.
				1009
				1010	If in doubt, say yes.
				1011
				1012	config MSM_SMD_PKT
				1013	bool "SMD Packet Driver"
				1014	depends on MSM_SMD
				1015	default y
				1016	help
				1017	Provides a binary SMD non-muxed packet port interface.
				1018
				1019	If in doubt, say yes.
				1020
				1021	config MSM_SDIO_CMUX
				1022	bool "SDIO CMUX Driver"
				1023	depends on MSM_SDIO_AL
				1024	default n
				1025	help
				1026	Provides a Muxed port interface over SDIO QMI
				1027
				1028	config MSM_DSPS
				1029	bool "Sensors DSPS driver"
				1030	depends on (MSM_PIL && (ARCH_MSM8X60 \|\| ARCH_MSM8960))
				1031	default n
				1032	help
				1033	Provides user-space interface to the sensors manager
				1034	to turn on/off the Sensors Processor system clocks.
				1035	It is the DSPS responsibility to turn on/off the sensors
				1036	themself.
				1037	The number of clocks and their name may vary between targets.
				1038	It also triggers the PIL to load the DSPS firmware.
				1039
				1040	config MSM_SDIO_CTL
				1041	bool "SDIO CTL Driver"
				1042	depends on MSM_SDIO_CMUX
				1043	default n
				1044	help
				1045	Provides a binary SDIO control port interface.
				1046
				1047	config MSM_ONCRPCROUTER
				1048	depends on MSM_SMD
				1049	default n
				1050	bool "MSM ONCRPC router support"
				1051	help
				1052	Support for the MSM ONCRPC router for communication between
				1053	the ARM9 and ARM11
				1054
				1055	config MSM_IPC_ROUTER
				1056	depends on MSM_IPC_ROUTER_SMD_XPRT
				1057	default n
				1058	bool "MSM IPC Router support"
				1059	help
				1060	Support for the MSM IPC Router for communication between
				1061	the APPs and the MODEM
				1062
				1063	config MSM_ONCRPCROUTER_DEBUG
				1064	depends on MSM_ONCRPCROUTER
				1065	default y
				1066	bool "MSM debug ONCRPC router support"
				1067	help
				1068	Support for debugging the ONCRPC router for communication
				1069	between the ARM9 and ARM11
				1070
				1071	config MSM_RPC_LOOPBACK_XPRT
				1072	depends on MSM_ONCRPCROUTER
				1073	default n
				1074	bool "MSM RPC local routing support"
				1075	help
				1076	Support for routing RPC messages between APPS clients
				1077	and APPS servers. Helps in testing APPS RPC framework.
				1078
				1079	config MSM_RPCSERVER_TIME_REMOTE
				1080	depends on MSM_ONCRPCROUTER && RTC_HCTOSYS
				1081	default y
				1082	bool "Time remote RPC server"
				1083	help
				1084	The time remote server receives notification of time bases and
				1085	reports these events to registered callback functions.
				1086
				1087	config MSM_RPCSERVER_WATCHDOG
				1088	depends on MSM_ONCRPCROUTER
				1089	default y
				1090	bool "Watchdog RPC server"
				1091	help
				1092	The dog_keepalive server handles watchdog events.
				1093
				1094	config MSM_RPC_WATCHDOG
				1095	depends on MSM_ONCRPCROUTER
				1096	default n
				1097	bool "Watchdog RPC client"
				1098	help
				1099	The dog_keepalive client module.
				1100
				1101	config MSM_RPC_PING
				1102	depends on MSM_ONCRPCROUTER && DEBUG_FS
				1103	default m
				1104	bool "MSM rpc ping"
				1105	help
				1106	Implements MSM rpc ping test module.
				1107
				1108	config MSM_RPC_PROC_COMM_TEST
				1109	depends on DEBUG_FS && MSM_PROC_COMM
				1110	default m
				1111	bool "MSM rpc proc comm test"
				1112	help
				1113	Implements MSM rpc proc comm test module.
				1114
				1115	config MSM_RPC_OEM_RAPI
				1116	depends on MSM_ONCRPCROUTER
				1117	default m
				1118	bool "MSM oem rapi"
				1119	help
				1120	Implements MSM oem rapi client module.
				1121
				1122	config MSM_RPCSERVER_HANDSET
				1123	depends on MSM_ONCRPCROUTER
				1124	default y
				1125	bool "Handset events RPC server"
				1126	help
				1127	Support for receiving handset events like headset detect,
				1128	headset switch and clamshell state.
				1129
				1130	config MSM_RMT_STORAGE_CLIENT
				1131	depends on (ARCH_MSM && MSM_ONCRPCROUTER)
				1132	default n
				1133	bool "Remote Storage RPC client"
				1134	help
				1135	Provide RPC mechanism for remote processors to access storage
				1136	device on apps processor.
				1137
				1138	config MSM_RMT_STORAGE_CLIENT_STATS
				1139	depends on (MSM_RMT_STORAGE_CLIENT && DEBUG_FS)
				1140	default n
				1141	bool "Remote storage RPC client performance statistics"
				1142	help
				1143	Collects performance statistics and shows this information
				1144	through a debugfs file rmt_storage_stats.
				1145
				1146	config MSM_SDIO_SMEM
				1147	depends on MSM_SDIO_AL
				1148	default n
				1149	bool "SDIO SMEM for remote storage"
				1150	help
				1151	Copies data from remote MDM9K memory to local MSM8x60
				1152	memory. Used by remote storage client to shadow
				1153	MDM9K filesystem.
				1154
				1155	config MSM_DALRPC
				1156	bool "DAL RPC support"
				1157	depends on ARCH_MSM_SCORPION \|\| ARCH_MSM_KRAIT
				1158	default y
				1159	help
				1160	Supports RPC calls to DAL devices on remote processor cores.
				1161
				1162	config MSM_DALRPC_TEST
				1163	tristate "DAL RPC test module"
				1164	depends on (MSM_DALRPC && DEBUG_FS)
				1165	default m
				1166	help
				1167	Exercises DAL RPC calls to QDSP6.
				1168
				1169	if CPU_FREQ_MSM
				1170
				1171	config MSM_CPU_FREQ_SET_MIN_MAX
				1172	bool "Set Min/Max CPU frequencies."
				1173	default n
				1174	help
				1175	Allow setting min and max CPU frequencies. Sysfs can be used
				1176	to override these values.
				1177
				1178	config MSM_CPU_FREQ_MAX
				1179	int "Max CPU Frequency"
				1180	depends on MSM_CPU_FREQ_SET_MIN_MAX
				1181	default 384000
				1182
				1183	config MSM_CPU_FREQ_MIN
				1184	int "Min CPU Frequency"
				1185	depends on MSM_CPU_FREQ_SET_MIN_MAX
				1186	default 245760
				1187
				1188	endif # CPU_FREQ_MSM
				1189
				1190	config MSM_CPU_AVS
				1191	bool "Enable software controlled Adaptive Voltage Scaling (AVS)"
				1192	depends on (ARCH_MSM_SCORPION && QSD_SVS)
				1193	depends on ARCH_QSD8X50
				1194	default n
				1195	select MSM_AVS_HW
				1196	help
				1197	This enables the s/w control of Adaptive Voltage Scaling feature
				1198	in Qualcomm ARMv7 CPUs. It adjusts the voltage for each frequency
				1199	based on feedback from three ring oscillators in the CPU.
				1200
				1201	config MSM_AVS_HW
				1202	bool "Enable Adaptive Voltage Scaling (AVS)"
				1203	default n
				1204	help
				1205	Enable AVS hardware to fine tune voltage at each frequency. The
				1206	AVS hardware blocks associated with each Qualcomm ARMv7 cores can
				1207	fine tune the voltages based on the feedback from the ring
				1208	oscillators.
				1209
				1210	config MSM_HW3D
				1211	tristate "MSM Hardware 3D Register Driver"
				1212	depends on ANDROID_PMEM
				1213	default y
				1214	help
				1215	Provides access to registers needed by the userspace OpenGL\|ES
				1216	library.
				1217
				1218	config MSM_ADSP
				1219	depends on (ARCH_MSM7X01A \|\| ARCH_MSM7X25 \|\| ARCH_MSM7X27)
				1220	tristate "MSM ADSP driver"
				1221	depends on ANDROID_PMEM
				1222	default y
				1223	help
				1224	Provides access to registers needed by the userspace aDSP library.
				1225
				1226	config ADSP_RPC_VER
				1227	hex
				1228	default 0x30002 if (ARCH_MSM7X27 \|\| (ARCH_MSM7X25 && AMSS_7X25_VERSION_2009))
				1229	default 0x30001 if (ARCH_MSM7X01A \|\| (ARCH_MSM7X25 && AMSS_7X25_VERSION_2008))
				1230	depends on MSM_ADSP
				1231	help
				1232	Select proper ADSP RPC version
				1233	choice
				1234	prompt "ADSP RPC version"
				1235
				1236	default AMSS_7X25_VERSION_2009
				1237
				1238	config AMSS_7X25_VERSION_2009
				1239	bool "2.0.09"
				1240
				1241	config AMSS_7X25_VERSION_2008
				1242	bool "2.0.08"
				1243	endchoice
				1244
				1245	config MSM7KV2_AUDIO
				1246	bool "MSM7K v2 audio"
				1247	depends on (ARCH_MSM7X30 && ANDROID_PMEM)
				1248	default y
				1249	help
				1250	Enables QDSP5V2-based audio drivers for audio playbacks and
				1251	voice call.
				1252
				1253	config MSM_ADSP_REPORT_EVENTS
				1254	bool "Report modem events from the DSP"
				1255	default y
				1256	depends on (MSM_ADSP \|\| MSM7KV2_AUDIO)
				1257	help
				1258	Normally, only messages from the aDSP are reported to userspace.
				1259	With this option, we report events from the aDSP as well.
				1260
				1261	config MSM_QDSP6
				1262	tristate "QDSP6 support"
				1263	depends on ARCH_QSD8X50 && ANDROID_PMEM
				1264	default y
				1265	help
				1266	Enable support for qdsp6. This provides audio and video functionality.
				1267
				1268	config MSM8X60_AUDIO
				1269	tristate "MSM8X60 audio support"
				1270	depends on ARCH_MSM8X60 && ANDROID_PMEM
				1271	default y
				1272	help
				1273	Enable support for qdsp6v2. This provides audio functionality.
				1274
				1275	config MSM8X60_FTM_AUDIO_DEVICES
				1276	bool "MSM8X60 audio factory test mode support"
				1277	depends on MSM8X60_AUDIO
				1278	help
				1279	Enable support audio factory test mode devices. This is used
				1280	in a production line environment.
				1281
Ben Romberger	45b351c	2011-07-20 22:37:27 -0700	[diff] [blame]	1282	config RTAC
				1283	bool "MSM8K real-time audio calibration support"
				1284	default y
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1285	help
Ben Romberger	45b351c	2011-07-20 22:37:27 -0700	[diff] [blame]	1286	Enable support for rtac. This enables calibration during
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1287	audio operation
				1288
				1289	config MSM7X27A_AUDIO
				1290	bool "MSM7X27A audio support"
				1291	depends on ARCH_MSM7X27A && MSM_ADSP
				1292	default n
				1293	help
				1294	Enable support for 7x27a. This provides audio functionality.
				1295
Justin Paupore	a6cd209	2011-06-22 16:19:45 -0700	[diff] [blame]	1296	config MSM_PROC_COMM_REGULATOR
				1297	bool
				1298	depends on MSM_PROC_COMM && REGULATOR
				1299	help
				1300	Enable regulator framework support for regulators managed by PMLIB
				1301	on the modem, and controlled through proccomm calls.
				1302
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1303	config MSM_VREG_SWITCH_INVERTED
				1304	bool "Reverse vreg switch polarity"
				1305	default n
				1306	help
				1307	Reverses the enable and disable for vreg switch.
				1308
				1309	config MSM_DMA_TEST
				1310	tristate "MSM DMA test module"
				1311	default m
				1312	help
				1313	Intended to be compiled as a module. Provides a device node
				1314	and ioctls for testing the MSM dma system.
				1315
				1316	config WIFI_CONTROL_FUNC
				1317	bool "Enable WiFi control function abstraction"
				1318	help
				1319	Enables Power/Reset/Carddetect function abstraction
				1320
				1321	config WIFI_MEM_PREALLOC
				1322	depends on WIFI_CONTROL_FUNC
				1323	bool "Preallocate memory for WiFi buffers"
				1324	help
				1325	Preallocates memory buffers for WiFi driver
				1326
				1327	config QSD_AUDIO
				1328	bool "QSD audio"
				1329	depends on ARCH_MSM_SCORPION && MSM_DALRPC && ANDROID_PMEM && !MSM_SMP
				1330	default y
				1331	help
				1332	Provides PCM, MP3, and AAC audio playback.
				1333
				1334	config AUDIO_AAC_PLUS
				1335	depends on (MSM_ADSP \|\| QSD_AUDIO \|\| MSM7KV2_AUDIO)
				1336	bool "AAC+ Audio"
				1337	default y
				1338	help
				1339	Provides AAC+ decoding
				1340
				1341	config AUDIO_ENHANCED_AAC_PLUS
				1342	depends on AUDIO_AAC_PLUS
				1343	bool "Enhanced AAC+ Audio"
				1344	default y
				1345	help
				1346	Provides Enhanced AAC+ decoding
				1347
				1348	config SURF_FFA_GPIO_KEYPAD
				1349	bool "MSM SURF/FFA GPIO keypad"
				1350	depends on INPUT_GPIO = "y"
				1351	default y
				1352	help
				1353	Select if the GPIO keypad is attached.
				1354
				1355	config MSM_SLEEP_TIME_OVERRIDE
				1356	bool "Allow overriding suspend/sleep time with PM module parameter"
				1357	default y
				1358	help
				1359	Enable the module parameter sleep_time_override. Specified
				1360	in units of seconds, it overwrites the normal sleep time of
				1361	suspend. The feature is required for automated power management
				1362	testing.
				1363
				1364	config MSM_MEMORY_LOW_POWER_MODE
				1365	bool "Control the low power modes of memory"
				1366	default n
				1367	help
				1368	The application processor controls whether memory should enter
				1369	which low power mode.
				1370
				1371	choice
				1372	prompt "Default Memory Low Power Mode during Idle"
				1373	depends on MSM_MEMORY_LOW_POWER_MODE
				1374	default MSM_MEMORY_LOW_POWER_MODE_IDLE_ACTIVE
				1375	help
				1376	Selects the default low power mode of the memory during idle
				1377	sleep.
				1378
				1379	config MSM_MEMORY_LOW_POWER_MODE_IDLE_ACTIVE
				1380	bool "Memory active"
				1381
				1382	config MSM_MEMORY_LOW_POWER_MODE_IDLE_RETENTION
				1383	bool "Memory in retention"
				1384
				1385	config MSM_MEMORY_LOW_POWER_MODE_IDLE_DEEP_POWER_DOWN
				1386	bool "Memory in deep power down"
				1387	endchoice
				1388
				1389	choice
				1390	prompt "Default Memory Low Power Mode during Suspend"
				1391	depends on MSM_MEMORY_LOW_POWER_MODE
				1392	default MSM_MEMORY_LOW_POWER_MODE_SUSPEND_ACTIVE
				1393	help
				1394	Selects the default low power mode of the memory during suspend
				1395	sleep.
				1396
				1397	config MSM_MEMORY_LOW_POWER_MODE_SUSPEND_ACTIVE
				1398	bool "Memory active"
				1399
				1400	config MSM_MEMORY_LOW_POWER_MODE_SUSPEND_RETENTION
				1401	bool "Memory in retention"
				1402
				1403	config MSM_MEMORY_LOW_POWER_MODE_SUSPEND_DEEP_POWER_DOWN
				1404	bool "Memory in deep power down"
				1405	endchoice
				1406
				1407	choice
				1408	prompt "Power management timeout action"
				1409	default MSM_PM_TIMEOUT_HALT
				1410	help
				1411	Selects the Application Processor's action when Power Management
				1412	times out waiting for Modem's handshake.
				1413
				1414	config MSM_PM_TIMEOUT_HALT
				1415	bool "Halt the Application Processor"
				1416
				1417	config MSM_PM_TIMEOUT_RESET_MODEM
				1418	bool "Reset the Modem Processor"
				1419
				1420	config MSM_PM_TIMEOUT_RESET_CHIP
				1421	bool "Reset the entire chip"
				1422	endchoice
				1423
				1424	config MSM_IDLE_WAIT_ON_MODEM
				1425	int "Wait for Modem to become ready for idle power collapse"
				1426	default 0
				1427	help
				1428	If Modem is not ready to handle Application Processor's request
				1429	for idle power collapse, wait the number of microseconds in case
				1430	Modem becomes ready soon.
				1431
				1432	config MSM_PIL
				1433	bool "Peripheral image loading"
				1434	select FW_LOADER
				1435	depends on (ARCH_MSM8X60 \|\| ARCH_MSM8960)
				1436	default n
				1437	help
				1438	Some peripherals need to be loaded into memory before they can be
				1439	brought out of reset.
				1440
				1441	Say yes to support these devices.
				1442
				1443	config MSM_SECURE_PIL
				1444	bool "Secure Peripheral image loading"
				1445	depends on MSM_PIL
				1446	default n
				1447
				1448	config MSM_SCM
				1449	bool "Secure Channel Manager (SCM) support"
				1450	default n
				1451
				1452	config MSM_SUBSYSTEM_RESTART
				1453	bool "MSM Subsystem Restart Driver"
				1454	depends on (ARCH_MSM8X60 \|\| ARCH_MSM8960)
				1455	default n
				1456	help
				1457	This option enables the MSM subsystem restart driver, which provides
				1458	a framework to handle subsystem crashes.
				1459
				1460	config MSM_MODEM_8960
				1461	bool "MSM 8960 Modem driver"
				1462	depends on (ARCH_MSM8960)
				1463	help
				1464	This option enables the modem driver for the MSM8960, which monitors
				1465	modem hardware watchdog interrupt lines and plugs into the subsystem
				1466	restart and PIL drivers.
				1467
Bharath Ramachandramurthy	ff061c7	2011-06-27 14:22:33 -0700	[diff] [blame]	1468	config MSM_LPASS_8960
				1469	tristate "MSM 8960 Lpass driver"
				1470	depends on (ARCH_MSM8960)
				1471	help
				1472	This option enables the lpass driver for the MSM8960, which monitors
				1473	lpass hardware watchdog interrupt lines and plugs into the subsystem
				1474	restart and PIL drivers.
				1475
Ankur Nandwani	e258cf0	2011-08-19 10:16:38 -0700	[diff] [blame]	1476	config MSM_WCNSS_SSR_8960
				1477	tristate "MSM 8960 WCNSS restart module"
				1478	depends on (ARCH_MSM8960)
				1479	help
				1480	This option enables the WCNSS restart module for MSM8960, which
				1481	monitors WCNSS hardware watchdog interrupt lines and plugs WCNSS
				1482	into the subsystem restart framework.
				1483
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1484	config SCORPION_Uni_45nm_BUG
				1485	bool "Scorpion Uni 45nm(SC45U): Workaround for ICIMVAU and BPIMVA"
				1486	depends on ARCH_MSM7X30 \|\| (ARCH_QSD8X50 && MSM_SOC_REV_A)
				1487	default y
				1488	help
				1489	Invalidating the Instruction Cache by Modified Virtual Address to PoU and
				1490	invalidating the Branch Predictor Array by Modified Virtual Address can
				1491	create invalid entries in the TLB with the wrong ASID values on Scorpion
				1492	Uniprocessor 45nm (SC45U) cores. This option enables the recommended software
				1493	workaround for Scorpion Uniprocessor 45nm cores.
				1494
				1495	This bug is not applicable to any ScorpionMP or Scorpion Uni 65nm(SC65U) cores.
				1496
				1497	config MSM_RPM_LOG
				1498	tristate "MSM Resource Power Manager Log Driver"
				1499	depends on DEBUG_FS
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1500	default n
				1501	help
				1502	This option enables a driver which can read from a circular buffer
				1503	of messages produced by the RPM. These messages provide diagnostic
				1504	information about RPM operation. The driver outputs the messages
				1505	via a debugfs node.
				1506
				1507	config MSM_RPM_STATS_LOG
				1508	tristate "MSM Resource Power Manager Stat Driver"
				1509	depends on DEBUG_FS
				1510	depends on ARCH_MSM8X60
				1511	default n
				1512	help
				1513	This option enables a driver which reads RPM messages from a shared
				1514	memory location. These messages provide statistical information about
				1515	the low power modes that RPM enters. The drivers outputs the message
				1516	via a debugfs node.
				1517
				1518	config MSM_IOMMU
				1519	bool "MSM IOMMU Support"
				1520	depends on ARCH_MSM8X60 \|\| ARCH_MSM8960
				1521	select IOMMU_API
				1522	default n
				1523	help
				1524	Support for the IOMMUs found on certain Qualcomm SOCs.
				1525	These IOMMUs allow virtualization of the address space used by most
				1526	cores within the multimedia subsystem.
				1527
				1528	If unsure, say N here.
				1529
				1530	config IOMMU_PGTABLES_L2
				1531	bool "Allow SMMU page tables in the L2 cache (Experimental)"
				1532	depends on MSM_IOMMU=y
				1533	depends on MMU
				1534	depends on CPU_DCACHE_DISABLE=n
				1535	depends on SMP
				1536	default y
				1537	help
				1538	Improves TLB miss latency at the expense of potential L2 pollution.
				1539	However, with large multimedia buffers, the TLB should mostly contain
				1540	section mappings and TLB misses should be quite infrequent.
				1541	Most people can probably say Y here.
				1542
				1543	config MSM_DIRECT_SCLK_ACCESS
				1544	bool "Direct access to the SCLK timer"
				1545	default n
				1546
				1547	config IOMMU_API
				1548	bool
Brian Swetland	2eb44eb	2008-09-29 16:00:48 -0700	[diff] [blame]	1549
Gregory Bean	ab78cde	2010-09-01 16:26:12 -0700	[diff] [blame]	1550	config MSM_GPIOMUX
				1551	bool
				1552
Gregory Bean	1963a2a	2010-08-28 10:05:44 -0700	[diff] [blame]	1553	config MSM_V2_TLMM
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1554	bool
				1555
				1556	config FSM9XXX_TLMM
Gregory Bean	1963a2a	2010-08-28 10:05:44 -0700	[diff] [blame]	1557	bool
Stepan Moskovchenko	0ab84745	2010-11-12 19:29:57 -0800	[diff] [blame]	1558
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1559	config MSM_SECURE_IO
Stepan Moskovchenko	0ab84745	2010-11-12 19:29:57 -0800	[diff] [blame]	1560	bool
Stephen Boyd	2a1eb58	2010-08-27 10:01:23 -0700	[diff] [blame]	1561
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1562	config MSM_NATIVE_RESTART
Stephen Boyd	2a1eb58	2010-08-27 10:01:23 -0700	[diff] [blame]	1563	bool
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1564
				1565	config MSM_BUS_SCALING
				1566	bool "Bus scaling driver"
				1567	default n
				1568
Gagan Mac	85c7049	2011-06-10 16:07:47 -0600	[diff] [blame]	1569	config MSM_BUS_RPM_MULTI_TIER_ENABLED
				1570	bool "RPM Multi-tiering Configuration"
				1571	depends on MSM_BUS_SCALING
				1572
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1573	config MSM_WATCHDOG
				1574	bool "MSM Watchdog Support"
Rohit Vaswani	085a933	2011-09-28 18:57:24 -0700	[diff] [blame^]	1575	depends on ARCH_MSM8X60 \|\| ARCH_MSM8960 \|\| ARCH_MSM9615
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1576	help
				1577	This enables the watchdog as is present on 8x60. Currently we use
				1578	core 0's watchdog, and reset the entire SoC if it times out. It does
				1579	not run during the bootup process, so it will not catch any early
				1580	lockups.
				1581
				1582	config MSM_DLOAD_MODE
				1583	bool "Enable download mode on crashes"
				1584	depends on ARCH_MSM8X60 \|\| ARCH_MSM8960
				1585	default n
				1586	help
				1587	This makes the SoC enter download mode when it resets
				1588	due to a kernel panic. Note that this doesn't by itself
				1589	make the kernel reboot on a kernel panic - that must be
				1590	enabled via another mechanism.
				1591
Pratik Patel	7831c08	2011-06-08 21:44:37 -0700	[diff] [blame]	1592	config MSM_TRACE_ACROSS_PC
				1593	bool "Trace support across power collapse"
				1594	depends on ARCH_MSM8X60 \|\| ARCH_MSM8960
				1595	help
				1596	Enables trace state to be saved and restored across power collapse.
				1597
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1598	config MSM_ETM
				1599	tristate "Enable MSM ETM and ETB"
				1600	depends on ARCH_MSM8X60
Pratik Patel	7831c08	2011-06-08 21:44:37 -0700	[diff] [blame]	1601	select MSM_TRACE_ACROSS_PC
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1602	help
Pratik Patel	7831c08	2011-06-08 21:44:37 -0700	[diff] [blame]	1603	Enables embedded trace collection on Qualcomm v7 CPUs.
				1604
				1605	config MSM_QDSS
				1606	bool "Coresight tracing support"
				1607	depends on ARCH_MSM8960
				1608	select MSM_TRACE_ACROSS_PC
				1609	help
				1610	Enables support for Qualcomm debug subsystem.
Bryan Huntsman	3f2bc4d	2011-08-16 17:27:22 -0700	[diff] [blame]	1611
				1612	config MSM_SLEEP_STATS
				1613	bool "Enable exporting of MSM sleep stats to userspace"
				1614	depends on CPU_IDLE
				1615	default n
				1616
				1617	config MSM_STANDALONE_POWER_COLLAPSE
				1618	bool "Enable standalone power collapse"
				1619	default n
				1620
				1621	config MSM_GSBI9_UART
				1622	bool "Enable GSBI9 UART device"
				1623	default n
				1624	help
				1625	This enables GSBI9 configured into UART.
				1626
				1627	config MSM_SHARED_GPIO_FOR_UART2DM
				1628	bool "Use shared GPIOs into UART mode"
				1629	depends on (ARCH_MSM7X27A && !MMC_MSM_SDC3_8_BIT_SUPPORT && !MMC_MSM_SDC4_SUPPORT)
				1630	help
				1631	This option configures GPIO muxed with SDC4/MMC3
				1632	8-bit mode into UART mode. It is used for serial
				1633	console on UART2DM. Say Y if you want to have
				1634	serial console on UART2DM.
				1635
				1636	config MSM_SHOW_RESUME_IRQ
				1637	bool "Enable logging of interrupts that could have caused resume"
				1638	depends on (ARCH_MSM8X60 \|\| ARCH_MSM8960)
				1639	default n
				1640	help
				1641	This option logs wake up interrupts that have triggered just before
				1642	the resume loop unrolls. Say Y if you want to debug why the system
				1643	resumed.
				1644
				1645	config BT_MSM_PINTEST
				1646	tristate "MSM Bluetooth Pin Connectivity Test"
				1647	depends on ((ARCH_MSM8X60 \|\| ARCH_MSM7X27A) && DEBUG_FS)
				1648	default n
				1649	help
				1650	Bluetooth MSM Pin Connectivity test module.
				1651	This driver provides support for verifying the MSM to BT pin
				1652	connectivity.
				1653
				1654	config MSM_FAKE_BATTERY
				1655	depends on POWER_SUPPLY
				1656	default n
				1657	bool "MSM Fake Battery"
				1658	help
				1659	Enables MSM fake battery driver.
				1660
				1661	config MSM_QDSP6_APR
				1662	bool "Audio QDSP6 APR support"
				1663	depends on MSM_SMD
				1664	default n
				1665	help
				1666	Enable APR IPC protocol support between
				1667	application processor and QDSP6. APR is
				1668	used by audio driver to configure QDSP6's
				1669	ASM, ADM and AFE.
				1670
				1671
				1672	config MSM_AUDIO_QDSP6
				1673	bool "QDSP6 HW Audio support"
				1674	select SND_SOC_MSM_QDSP6_INTF
				1675	default n
				1676	help
				1677	Enable HW audio support in QDSP6.
				1678	QDSP6 can support HW encoder & decoder and audio processing
				1679
				1680	config MSM_RPC_VIBRATOR
				1681	bool "RPC based MSM Vibrator Support"
				1682	depends on MSM_ONCRPCROUTER
				1683	help
				1684	Enable the vibrator support on MSM over RPC. The vibrator
				1685	is connected on the PMIC. Say Y if you want to enable this
				1686	feature.
				1687
				1688	config PM8XXX_RPC_VIBRATOR
				1689	bool "RPC based Vibrator on PM8xxx PMICs"
				1690	depends on MSM_RPC_VIBRATOR
				1691	help
				1692	Enable the vibrator support on MSM over RPC. The vibrator
				1693	is connected on the PM8XXX PMIC. Say Y if you want to enable
				1694	this feature.
				1695
				1696	config MSM_SPM_V1
				1697	bool "Driver support for SPM Version 1"
				1698	help
				1699	Enables the support for Version 1 of the SPM driver. SPM hardware is
				1700	used to manage the processor power during sleep. The driver allows
				1701	configuring SPM to allow different power modes.
				1702
				1703	config MSM_SPM_V2
				1704	bool "Driver support for SPM Version 2"
				1705	help
				1706	Enables the support for Version 2 of the SPM driver. SPM hardware is
				1707	used to manage the processor power during sleep. The driver allows
				1708	configuring SPM to allow different power modes.
				1709
				1710	config MSM_L2_SPM
				1711	bool "SPM support for L2 cache"
				1712	depends on MSM_SPM_V2
				1713	help
				1714	Enable SPM driver support for L2 cache. Some MSM chipsets allow
				1715	control of L2 cache low power mode with a Subsystem Power manager.
				1716	Enabling this driver allows configuring L2 SPM for low power modes
				1717	on supported chipsets.
				1718
Brian Swetland	9e73c84	2007-11-26 04:12:13 -0800	[diff] [blame]	1719	endif