arch/powerpc/boot/dts/mpc8641_hpcn.dts

/*
 * MPC8641 HPCN Device Tree Source
 *
 * Copyright 2006 Freescale Semiconductor Inc.
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */


/ {
	model = "MPC8641HPCN";
	compatible = "mpc86xx";
	#address-cells = <1>;
	#size-cells = <1>;

	aliases {
		ethernet0 = &enet0;
		ethernet1 = &enet1;
		ethernet2 = &enet2;
		ethernet3 = &enet3;
		serial0 = &serial0;
		serial1 = &serial1;
		pci0 = &pci0;
		pci1 = &pci1;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		PowerPC,8641@0 {
			device_type = "cpu";
			reg = <0>;
			d-cache-line-size = <20>;	// 32 bytes
			i-cache-line-size = <20>;	// 32 bytes
			d-cache-size = <8000>;		// L1, 32K
			i-cache-size = <8000>;		// L1, 32K
			timebase-frequency = <0>;	// 33 MHz, from uboot
			bus-frequency = <0>;		// From uboot
			clock-frequency = <0>;		// From uboot
		};
		PowerPC,8641@1 {
			device_type = "cpu";
			reg = <1>;
			d-cache-line-size = <20>;	// 32 bytes
			i-cache-line-size = <20>;	// 32 bytes
			d-cache-size = <8000>;		// L1, 32K
			i-cache-size = <8000>;		// L1, 32K
			timebase-frequency = <0>;	// 33 MHz, from uboot
			bus-frequency = <0>;		// From uboot
			clock-frequency = <0>;		// From uboot
		};
	};

	memory {
		device_type = "memory";
		reg = <00000000 40000000>;	// 1G at 0x0
	};

	localbus@f8005000 {
		#address-cells = <2>;
		#size-cells = <1>;
		compatible = "fsl,mpc8641-localbus", "simple-bus";
		reg = <f8005000 1000>;
		interrupts = <13 2>;
		interrupt-parent = <&mpic>;

		ranges = <0 0 ff800000 00800000
			  1 0 fe000000 01000000
			  2 0 f8200000 00100000
			  3 0 f8100000 00100000>;

		flash@0,0 {
			compatible = "cfi-flash";
			reg = <0 0 00800000>;
			bank-width = <2>;
			device-width = <2>;
			#address-cells = <1>;
			#size-cells = <1>;
			partition@0 {
				label = "kernel";
				reg = <00000000 00300000>;
			};
			partition@300000 {
				label = "firmware b";
				reg = <00300000 00100000>;
				read-only;
			};
			partition@400000 {
				label = "fs";
				reg = <00400000 00300000>;
			};
			partition@700000 {
				label = "firmware a";
				reg = <00700000 00100000>;
				read-only;
			};
		};
	};

	soc8641@f8000000 {
		#address-cells = <1>;
		#size-cells = <1>;
		device_type = "soc";
		compatible = "simple-bus";
		ranges = <00000000 f8000000 00100000>;
		reg = <f8000000 00001000>;	// CCSRBAR
		bus-frequency = <0>;

		i2c@3000 {
			#address-cells = <1>;
			#size-cells = <0>;
			cell-index = <0>;
			compatible = "fsl-i2c";
			reg = <3000 100>;
			interrupts = <2b 2>;
			interrupt-parent = <&mpic>;
			dfsrr;
		};

		i2c@3100 {
			#address-cells = <1>;
			#size-cells = <0>;
			cell-index = <1>;
			compatible = "fsl-i2c";
			reg = <3100 100>;
			interrupts = <2b 2>;
			interrupt-parent = <&mpic>;
			dfsrr;
		};

		mdio@24520 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "fsl,gianfar-mdio";
			reg = <24520 20>;

			phy0: ethernet-phy@0 {
				interrupt-parent = <&mpic>;
				interrupts = <a 1>;
				reg = <0>;
				device_type = "ethernet-phy";
			};
			phy1: ethernet-phy@1 {
				interrupt-parent = <&mpic>;
				interrupts = <a 1>;
				reg = <1>;
				device_type = "ethernet-phy";
			};
			phy2: ethernet-phy@2 {
				interrupt-parent = <&mpic>;
				interrupts = <a 1>;
				reg = <2>;
				device_type = "ethernet-phy";
			};
			phy3: ethernet-phy@3 {
				interrupt-parent = <&mpic>;
				interrupts = <a 1>;
				reg = <3>;
				device_type = "ethernet-phy";
			};
		};

		enet0: ethernet@24000 {
			cell-index = <0>;
			device_type = "network";
			model = "TSEC";
			compatible = "gianfar";
			reg = <24000 1000>;
			local-mac-address = [ 00 00 00 00 00 00 ];
			interrupts = <1d 2 1e 2 22 2>;
			interrupt-parent = <&mpic>;
			phy-handle = <&phy0>;
			phy-connection-type = "rgmii-id";
		};

		enet1: ethernet@25000 {
			cell-index = <1>;
			device_type = "network";
			model = "TSEC";
			compatible = "gianfar";
			reg = <25000 1000>;
			local-mac-address = [ 00 00 00 00 00 00 ];
			interrupts = <23 2 24 2 28 2>;
			interrupt-parent = <&mpic>;
			phy-handle = <&phy1>;
			phy-connection-type = "rgmii-id";
		};
		
		enet2: ethernet@26000 {
			cell-index = <2>;
			device_type = "network";
			model = "TSEC";
			compatible = "gianfar";
			reg = <26000 1000>;
			local-mac-address = [ 00 00 00 00 00 00 ];
			interrupts = <1F 2 20 2 21 2>;
			interrupt-parent = <&mpic>;
			phy-handle = <&phy2>;
			phy-connection-type = "rgmii-id";
		};

		enet3: ethernet@27000 {
			cell-index = <3>;
			device_type = "network";
			model = "TSEC";
			compatible = "gianfar";
			reg = <27000 1000>;
			local-mac-address = [ 00 00 00 00 00 00 ];
			interrupts = <25 2 26 2 27 2>;
			interrupt-parent = <&mpic>;
			phy-handle = <&phy3>;
			phy-connection-type = "rgmii-id";
		};

		serial0: serial@4500 {
			cell-index = <0>;
			device_type = "serial";
			compatible = "ns16550";
			reg = <4500 100>;
			clock-frequency = <0>;
			interrupts = <2a 2>;
			interrupt-parent = <&mpic>;
		};

		serial1: serial@4600 {
			cell-index = <1>;
			device_type = "serial";
			compatible = "ns16550";
			reg = <4600 100>;
			clock-frequency = <0>;
			interrupts = <1c 2>;
			interrupt-parent = <&mpic>;
		};

		mpic: pic@40000 {
			clock-frequency = <0>;
			interrupt-controller;
			#address-cells = <0>;
			#interrupt-cells = <2>;
			reg = <40000 40000>;
			compatible = "chrp,open-pic";
			device_type = "open-pic";
			big-endian;
		};

		global-utilities@e0000 {
			compatible = "fsl,mpc8641-guts";
			reg = <e0000 1000>;
			fsl,has-rstcr;
		};
	};

	pci0: pcie@f8008000 {
		cell-index = <0>;
		compatible = "fsl,mpc8641-pcie";
		device_type = "pci";
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		reg = <f8008000 1000>;
		bus-range = <0 ff>;
		ranges = <02000000 0 80000000 80000000 0 20000000
			  01000000 0 00000000 e2000000 0 00100000>;
		clock-frequency = <1fca055>;
		interrupt-parent = <&mpic>;
		interrupts = <18 2>;
		interrupt-map-mask = <ff00 0 0 7>;
		interrupt-map = <
			/* IDSEL 0x11 func 0 - PCI slot 1 */
			8800 0 0 1 &mpic 2 1
			8800 0 0 2 &mpic 3 1
			8800 0 0 3 &mpic 4 1
			8800 0 0 4 &mpic 1 1

			/* IDSEL 0x11 func 1 - PCI slot 1 */
			8900 0 0 1 &mpic 2 1
			8900 0 0 2 &mpic 3 1
			8900 0 0 3 &mpic 4 1
			8900 0 0 4 &mpic 1 1

			/* IDSEL 0x11 func 2 - PCI slot 1 */
			8a00 0 0 1 &mpic 2 1
			8a00 0 0 2 &mpic 3 1
			8a00 0 0 3 &mpic 4 1
			8a00 0 0 4 &mpic 1 1

			/* IDSEL 0x11 func 3 - PCI slot 1 */
			8b00 0 0 1 &mpic 2 1
			8b00 0 0 2 &mpic 3 1
			8b00 0 0 3 &mpic 4 1
			8b00 0 0 4 &mpic 1 1

			/* IDSEL 0x11 func 4 - PCI slot 1 */
			8c00 0 0 1 &mpic 2 1
			8c00 0 0 2 &mpic 3 1
			8c00 0 0 3 &mpic 4 1
			8c00 0 0 4 &mpic 1 1

			/* IDSEL 0x11 func 5 - PCI slot 1 */
			8d00 0 0 1 &mpic 2 1
			8d00 0 0 2 &mpic 3 1
			8d00 0 0 3 &mpic 4 1
			8d00 0 0 4 &mpic 1 1

			/* IDSEL 0x11 func 6 - PCI slot 1 */
			8e00 0 0 1 &mpic 2 1
			8e00 0 0 2 &mpic 3 1
			8e00 0 0 3 &mpic 4 1
			8e00 0 0 4 &mpic 1 1

			/* IDSEL 0x11 func 7 - PCI slot 1 */
			8f00 0 0 1 &mpic 2 1
			8f00 0 0 2 &mpic 3 1
			8f00 0 0 3 &mpic 4 1
			8f00 0 0 4 &mpic 1 1

			/* IDSEL 0x12 func 0 - PCI slot 2 */
			9000 0 0 1 &mpic 3 1
			9000 0 0 2 &mpic 4 1
			9000 0 0 3 &mpic 1 1
			9000 0 0 4 &mpic 2 1

			/* IDSEL 0x12 func 1 - PCI slot 2 */
			9100 0 0 1 &mpic 3 1
			9100 0 0 2 &mpic 4 1
			9100 0 0 3 &mpic 1 1
			9100 0 0 4 &mpic 2 1

			/* IDSEL 0x12 func 2 - PCI slot 2 */
			9200 0 0 1 &mpic 3 1
			9200 0 0 2 &mpic 4 1
			9200 0 0 3 &mpic 1 1
			9200 0 0 4 &mpic 2 1

			/* IDSEL 0x12 func 3 - PCI slot 2 */
			9300 0 0 1 &mpic 3 1
			9300 0 0 2 &mpic 4 1
			9300 0 0 3 &mpic 1 1
			9300 0 0 4 &mpic 2 1

			/* IDSEL 0x12 func 4 - PCI slot 2 */
			9400 0 0 1 &mpic 3 1
			9400 0 0 2 &mpic 4 1
			9400 0 0 3 &mpic 1 1
			9400 0 0 4 &mpic 2 1

			/* IDSEL 0x12 func 5 - PCI slot 2 */
			9500 0 0 1 &mpic 3 1
			9500 0 0 2 &mpic 4 1
			9500 0 0 3 &mpic 1 1
			9500 0 0 4 &mpic 2 1

			/* IDSEL 0x12 func 6 - PCI slot 2 */
			9600 0 0 1 &mpic 3 1
			9600 0 0 2 &mpic 4 1
			9600 0 0 3 &mpic 1 1
			9600 0 0 4 &mpic 2 1

			/* IDSEL 0x12 func 7 - PCI slot 2 */
			9700 0 0 1 &mpic 3 1
			9700 0 0 2 &mpic 4 1
			9700 0 0 3 &mpic 1 1
			9700 0 0 4 &mpic 2 1

			// IDSEL 0x1c  USB
			e000 0 0 1 &i8259 c 2
			e100 0 0 2 &i8259 9 2
			e200 0 0 3 &i8259 a 2
			e300 0 0 4 &i8259 b 2

			// IDSEL 0x1d  Audio
			e800 0 0 1 &i8259 6 2

			// IDSEL 0x1e Legacy
			f000 0 0 1 &i8259 7 2
			f100 0 0 1 &i8259 7 2

			// IDSEL 0x1f IDE/SATA
			f800 0 0 1 &i8259 e 2
			f900 0 0 1 &i8259 5 2
			>;

		pcie@0 {
			reg = <0 0 0 0 0>;
			#size-cells = <2>;
			#address-cells = <3>;
			device_type = "pci";
			ranges = <02000000 0 80000000
				  02000000 0 80000000
				  0 20000000

				  01000000 0 00000000
				  01000000 0 00000000
				  0 00100000>;
			uli1575@0 {
				reg = <0 0 0 0 0>;
				#size-cells = <2>;
				#address-cells = <3>;
				ranges = <02000000 0 80000000
					  02000000 0 80000000
					  0 20000000
					  01000000 0 00000000
					  01000000 0 00000000
					  0 00100000>;
				isa@1e {
					device_type = "isa";
					#interrupt-cells = <2>;
					#size-cells = <1>;
					#address-cells = <2>;
					reg = <f000 0 0 0 0>;
					ranges = <1 0 01000000 0 0
						  00001000>;
					interrupt-parent = <&i8259>;

					i8259: interrupt-controller@20 {
						reg = <1 20 2
						       1 a0 2
						       1 4d0 2>;
						interrupt-controller;
						device_type = "interrupt-controller";
						#address-cells = <0>;
						#interrupt-cells = <2>;
						compatible = "chrp,iic";
						interrupts = <9 2>;
						interrupt-parent = <&mpic>;
					};

					i8042@60 {
						#size-cells = <0>;
						#address-cells = <1>;
						reg = <1 60 1 1 64 1>;
						interrupts = <1 3 c 3>;
						interrupt-parent =
							<&i8259>;

						keyboard@0 {
							reg = <0>;
							compatible = "pnpPNP,303";
						};

						mouse@1 {
							reg = <1>;
							compatible = "pnpPNP,f03";
						};
					};

					rtc@70 {
						compatible =
							"pnpPNP,b00";
						reg = <1 70 2>;
					};

					gpio@400 {
						reg = <1 400 80>;
					};
				};
			};
		};

	};

	pci1: pcie@f8009000 {
		cell-index = <1>;
		compatible = "fsl,mpc8641-pcie";
		device_type = "pci";
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		reg = <f8009000 1000>;
		bus-range = <0 ff>;
		ranges = <02000000 0 a0000000 a0000000 0 20000000
			  01000000 0 00000000 e3000000 0 00100000>;
		clock-frequency = <1fca055>;
		interrupt-parent = <&mpic>;
		interrupts = <19 2>;
		interrupt-map-mask = <f800 0 0 7>;
		interrupt-map = <
			/* IDSEL 0x0 */
			0000 0 0 1 &mpic 4 1
			0000 0 0 2 &mpic 5 1
			0000 0 0 3 &mpic 6 1
			0000 0 0 4 &mpic 7 1
			>;
		pcie@0 {
			reg = <0 0 0 0 0>;
			#size-cells = <2>;
			#address-cells = <3>;
			device_type = "pci";
			ranges = <02000000 0 a0000000
				  02000000 0 a0000000
				  0 20000000

				  01000000 0 00000000
				  01000000 0 00000000
				  0 00100000>;
		};
	};
};