Mark Brown | e4ee831 | 2009-07-28 15:21:49 +0100 | [diff] [blame] | 1 | /* |
| 2 | * wm831x-dcdc.c -- DC-DC buck convertor driver for the WM831x series |
| 3 | * |
| 4 | * Copyright 2009 Wolfson Microelectronics PLC. |
| 5 | * |
| 6 | * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or modify it |
| 9 | * under the terms of the GNU General Public License as published by the |
| 10 | * Free Software Foundation; either version 2 of the License, or (at your |
| 11 | * option) any later version. |
| 12 | */ |
| 13 | |
| 14 | #include <linux/module.h> |
| 15 | #include <linux/moduleparam.h> |
| 16 | #include <linux/init.h> |
| 17 | #include <linux/bitops.h> |
| 18 | #include <linux/err.h> |
| 19 | #include <linux/i2c.h> |
| 20 | #include <linux/platform_device.h> |
| 21 | #include <linux/regulator/driver.h> |
| 22 | |
| 23 | #include <linux/mfd/wm831x/core.h> |
| 24 | #include <linux/mfd/wm831x/regulator.h> |
| 25 | #include <linux/mfd/wm831x/pdata.h> |
| 26 | |
| 27 | #define WM831X_BUCKV_MAX_SELECTOR 0x68 |
| 28 | #define WM831X_BUCKP_MAX_SELECTOR 0x66 |
| 29 | |
| 30 | #define WM831X_DCDC_MODE_FAST 0 |
| 31 | #define WM831X_DCDC_MODE_NORMAL 1 |
| 32 | #define WM831X_DCDC_MODE_IDLE 2 |
| 33 | #define WM831X_DCDC_MODE_STANDBY 3 |
| 34 | |
| 35 | #define WM831X_DCDC_MAX_NAME 6 |
| 36 | |
| 37 | /* Register offsets in control block */ |
| 38 | #define WM831X_DCDC_CONTROL_1 0 |
| 39 | #define WM831X_DCDC_CONTROL_2 1 |
| 40 | #define WM831X_DCDC_ON_CONFIG 2 |
| 41 | #define WM831X_DCDC_SLEEP_CONTROL 3 |
| 42 | |
| 43 | /* |
| 44 | * Shared |
| 45 | */ |
| 46 | |
| 47 | struct wm831x_dcdc { |
| 48 | char name[WM831X_DCDC_MAX_NAME]; |
| 49 | struct regulator_desc desc; |
| 50 | int base; |
| 51 | struct wm831x *wm831x; |
| 52 | struct regulator_dev *regulator; |
| 53 | }; |
| 54 | |
| 55 | static int wm831x_dcdc_is_enabled(struct regulator_dev *rdev) |
| 56 | { |
| 57 | struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); |
| 58 | struct wm831x *wm831x = dcdc->wm831x; |
| 59 | int mask = 1 << rdev_get_id(rdev); |
| 60 | int reg; |
| 61 | |
| 62 | reg = wm831x_reg_read(wm831x, WM831X_DCDC_ENABLE); |
| 63 | if (reg < 0) |
| 64 | return reg; |
| 65 | |
| 66 | if (reg & mask) |
| 67 | return 1; |
| 68 | else |
| 69 | return 0; |
| 70 | } |
| 71 | |
| 72 | static int wm831x_dcdc_enable(struct regulator_dev *rdev) |
| 73 | { |
| 74 | struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); |
| 75 | struct wm831x *wm831x = dcdc->wm831x; |
| 76 | int mask = 1 << rdev_get_id(rdev); |
| 77 | |
| 78 | return wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, mask, mask); |
| 79 | } |
| 80 | |
| 81 | static int wm831x_dcdc_disable(struct regulator_dev *rdev) |
| 82 | { |
| 83 | struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); |
| 84 | struct wm831x *wm831x = dcdc->wm831x; |
| 85 | int mask = 1 << rdev_get_id(rdev); |
| 86 | |
| 87 | return wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, mask, 0); |
| 88 | } |
| 89 | |
| 90 | static unsigned int wm831x_dcdc_get_mode(struct regulator_dev *rdev) |
| 91 | |
| 92 | { |
| 93 | struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); |
| 94 | struct wm831x *wm831x = dcdc->wm831x; |
| 95 | u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG; |
| 96 | int val; |
| 97 | |
| 98 | val = wm831x_reg_read(wm831x, reg); |
| 99 | if (val < 0) |
| 100 | return val; |
| 101 | |
| 102 | val = (val & WM831X_DC1_ON_MODE_MASK) >> WM831X_DC1_ON_MODE_SHIFT; |
| 103 | |
| 104 | switch (val) { |
| 105 | case WM831X_DCDC_MODE_FAST: |
| 106 | return REGULATOR_MODE_FAST; |
| 107 | case WM831X_DCDC_MODE_NORMAL: |
| 108 | return REGULATOR_MODE_NORMAL; |
| 109 | case WM831X_DCDC_MODE_STANDBY: |
| 110 | return REGULATOR_MODE_STANDBY; |
| 111 | case WM831X_DCDC_MODE_IDLE: |
| 112 | return REGULATOR_MODE_IDLE; |
| 113 | default: |
| 114 | BUG(); |
| 115 | } |
| 116 | } |
| 117 | |
| 118 | static int wm831x_dcdc_set_mode_int(struct wm831x *wm831x, int reg, |
| 119 | unsigned int mode) |
| 120 | { |
| 121 | int val; |
| 122 | |
| 123 | switch (mode) { |
| 124 | case REGULATOR_MODE_FAST: |
| 125 | val = WM831X_DCDC_MODE_FAST; |
| 126 | break; |
| 127 | case REGULATOR_MODE_NORMAL: |
| 128 | val = WM831X_DCDC_MODE_NORMAL; |
| 129 | break; |
| 130 | case REGULATOR_MODE_STANDBY: |
| 131 | val = WM831X_DCDC_MODE_STANDBY; |
| 132 | break; |
| 133 | case REGULATOR_MODE_IDLE: |
| 134 | val = WM831X_DCDC_MODE_IDLE; |
| 135 | break; |
| 136 | default: |
| 137 | return -EINVAL; |
| 138 | } |
| 139 | |
| 140 | return wm831x_set_bits(wm831x, reg, WM831X_DC1_ON_MODE_MASK, |
| 141 | val << WM831X_DC1_ON_MODE_SHIFT); |
| 142 | } |
| 143 | |
| 144 | static int wm831x_dcdc_set_mode(struct regulator_dev *rdev, unsigned int mode) |
| 145 | { |
| 146 | struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); |
| 147 | struct wm831x *wm831x = dcdc->wm831x; |
| 148 | u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG; |
| 149 | |
| 150 | return wm831x_dcdc_set_mode_int(wm831x, reg, mode); |
| 151 | } |
| 152 | |
| 153 | static int wm831x_dcdc_set_suspend_mode(struct regulator_dev *rdev, |
| 154 | unsigned int mode) |
| 155 | { |
| 156 | struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); |
| 157 | struct wm831x *wm831x = dcdc->wm831x; |
| 158 | u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL; |
| 159 | |
| 160 | return wm831x_dcdc_set_mode_int(wm831x, reg, mode); |
| 161 | } |
| 162 | |
| 163 | static int wm831x_dcdc_get_status(struct regulator_dev *rdev) |
| 164 | { |
| 165 | struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); |
| 166 | struct wm831x *wm831x = dcdc->wm831x; |
| 167 | int ret; |
| 168 | |
| 169 | /* First, check for errors */ |
| 170 | ret = wm831x_reg_read(wm831x, WM831X_DCDC_UV_STATUS); |
| 171 | if (ret < 0) |
| 172 | return ret; |
| 173 | |
| 174 | if (ret & (1 << rdev_get_id(rdev))) { |
| 175 | dev_dbg(wm831x->dev, "DCDC%d under voltage\n", |
| 176 | rdev_get_id(rdev) + 1); |
| 177 | return REGULATOR_STATUS_ERROR; |
| 178 | } |
| 179 | |
| 180 | /* DCDC1 and DCDC2 can additionally detect high voltage/current */ |
| 181 | if (rdev_get_id(rdev) < 2) { |
| 182 | if (ret & (WM831X_DC1_OV_STS << rdev_get_id(rdev))) { |
| 183 | dev_dbg(wm831x->dev, "DCDC%d over voltage\n", |
| 184 | rdev_get_id(rdev) + 1); |
| 185 | return REGULATOR_STATUS_ERROR; |
| 186 | } |
| 187 | |
| 188 | if (ret & (WM831X_DC1_HC_STS << rdev_get_id(rdev))) { |
| 189 | dev_dbg(wm831x->dev, "DCDC%d over current\n", |
| 190 | rdev_get_id(rdev) + 1); |
| 191 | return REGULATOR_STATUS_ERROR; |
| 192 | } |
| 193 | } |
| 194 | |
| 195 | /* Is the regulator on? */ |
| 196 | ret = wm831x_reg_read(wm831x, WM831X_DCDC_STATUS); |
| 197 | if (ret < 0) |
| 198 | return ret; |
| 199 | if (!(ret & (1 << rdev_get_id(rdev)))) |
| 200 | return REGULATOR_STATUS_OFF; |
| 201 | |
| 202 | /* TODO: When we handle hardware control modes so we can report the |
| 203 | * current mode. */ |
| 204 | return REGULATOR_STATUS_ON; |
| 205 | } |
| 206 | |
| 207 | static irqreturn_t wm831x_dcdc_uv_irq(int irq, void *data) |
| 208 | { |
| 209 | struct wm831x_dcdc *dcdc = data; |
| 210 | |
| 211 | regulator_notifier_call_chain(dcdc->regulator, |
| 212 | REGULATOR_EVENT_UNDER_VOLTAGE, |
| 213 | NULL); |
| 214 | |
| 215 | return IRQ_HANDLED; |
| 216 | } |
| 217 | |
| 218 | static irqreturn_t wm831x_dcdc_oc_irq(int irq, void *data) |
| 219 | { |
| 220 | struct wm831x_dcdc *dcdc = data; |
| 221 | |
| 222 | regulator_notifier_call_chain(dcdc->regulator, |
| 223 | REGULATOR_EVENT_OVER_CURRENT, |
| 224 | NULL); |
| 225 | |
| 226 | return IRQ_HANDLED; |
| 227 | } |
| 228 | |
| 229 | /* |
| 230 | * BUCKV specifics |
| 231 | */ |
| 232 | |
| 233 | static int wm831x_buckv_list_voltage(struct regulator_dev *rdev, |
| 234 | unsigned selector) |
| 235 | { |
| 236 | if (selector <= 0x8) |
| 237 | return 600000; |
| 238 | if (selector <= WM831X_BUCKV_MAX_SELECTOR) |
| 239 | return 600000 + ((selector - 0x8) * 12500); |
| 240 | return -EINVAL; |
| 241 | } |
| 242 | |
| 243 | static int wm831x_buckv_set_voltage_int(struct regulator_dev *rdev, int reg, |
| 244 | int min_uV, int max_uV) |
| 245 | { |
| 246 | struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); |
| 247 | struct wm831x *wm831x = dcdc->wm831x; |
| 248 | u16 vsel; |
| 249 | |
| 250 | if (min_uV < 600000) |
| 251 | vsel = 0; |
| 252 | else if (min_uV <= 1800000) |
| 253 | vsel = ((min_uV - 600000) / 12500) + 8; |
| 254 | else |
| 255 | return -EINVAL; |
| 256 | |
| 257 | if (wm831x_buckv_list_voltage(rdev, vsel) > max_uV) |
| 258 | return -EINVAL; |
| 259 | |
| 260 | return wm831x_set_bits(wm831x, reg, WM831X_DC1_ON_VSEL_MASK, vsel); |
| 261 | } |
| 262 | |
| 263 | static int wm831x_buckv_set_voltage(struct regulator_dev *rdev, |
| 264 | int min_uV, int max_uV) |
| 265 | { |
| 266 | struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); |
| 267 | u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG; |
| 268 | |
| 269 | return wm831x_buckv_set_voltage_int(rdev, reg, min_uV, max_uV); |
| 270 | } |
| 271 | |
| 272 | static int wm831x_buckv_set_suspend_voltage(struct regulator_dev *rdev, |
| 273 | int uV) |
| 274 | { |
| 275 | struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); |
| 276 | u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL; |
| 277 | |
| 278 | return wm831x_buckv_set_voltage_int(rdev, reg, uV, uV); |
| 279 | } |
| 280 | |
| 281 | static int wm831x_buckv_get_voltage(struct regulator_dev *rdev) |
| 282 | { |
| 283 | struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); |
| 284 | struct wm831x *wm831x = dcdc->wm831x; |
| 285 | u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG; |
| 286 | int val; |
| 287 | |
| 288 | val = wm831x_reg_read(wm831x, reg); |
| 289 | if (val < 0) |
| 290 | return val; |
| 291 | |
| 292 | return wm831x_buckv_list_voltage(rdev, val & WM831X_DC1_ON_VSEL_MASK); |
| 293 | } |
| 294 | |
| 295 | /* Current limit options */ |
| 296 | static u16 wm831x_dcdc_ilim[] = { |
| 297 | 125, 250, 375, 500, 625, 750, 875, 1000 |
| 298 | }; |
| 299 | |
| 300 | static int wm831x_buckv_set_current_limit(struct regulator_dev *rdev, |
| 301 | int min_uA, int max_uA) |
| 302 | { |
| 303 | struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); |
| 304 | struct wm831x *wm831x = dcdc->wm831x; |
| 305 | u16 reg = dcdc->base + WM831X_DCDC_CONTROL_2; |
| 306 | int i; |
| 307 | |
| 308 | for (i = 0; i < ARRAY_SIZE(wm831x_dcdc_ilim); i++) { |
| 309 | if (max_uA <= wm831x_dcdc_ilim[i]) |
| 310 | break; |
| 311 | } |
| 312 | if (i == ARRAY_SIZE(wm831x_dcdc_ilim)) |
| 313 | return -EINVAL; |
| 314 | |
| 315 | return wm831x_set_bits(wm831x, reg, WM831X_DC1_HC_THR_MASK, i); |
| 316 | } |
| 317 | |
| 318 | static int wm831x_buckv_get_current_limit(struct regulator_dev *rdev) |
| 319 | { |
| 320 | struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); |
| 321 | struct wm831x *wm831x = dcdc->wm831x; |
| 322 | u16 reg = dcdc->base + WM831X_DCDC_CONTROL_2; |
| 323 | int val; |
| 324 | |
| 325 | val = wm831x_reg_read(wm831x, reg); |
| 326 | if (val < 0) |
| 327 | return val; |
| 328 | |
| 329 | return wm831x_dcdc_ilim[val & WM831X_DC1_HC_THR_MASK]; |
| 330 | } |
| 331 | |
| 332 | static struct regulator_ops wm831x_buckv_ops = { |
| 333 | .set_voltage = wm831x_buckv_set_voltage, |
| 334 | .get_voltage = wm831x_buckv_get_voltage, |
| 335 | .list_voltage = wm831x_buckv_list_voltage, |
| 336 | .set_suspend_voltage = wm831x_buckv_set_suspend_voltage, |
| 337 | .set_current_limit = wm831x_buckv_set_current_limit, |
| 338 | .get_current_limit = wm831x_buckv_get_current_limit, |
| 339 | |
| 340 | .is_enabled = wm831x_dcdc_is_enabled, |
| 341 | .enable = wm831x_dcdc_enable, |
| 342 | .disable = wm831x_dcdc_disable, |
| 343 | .get_status = wm831x_dcdc_get_status, |
| 344 | .get_mode = wm831x_dcdc_get_mode, |
| 345 | .set_mode = wm831x_dcdc_set_mode, |
| 346 | .set_suspend_mode = wm831x_dcdc_set_suspend_mode, |
| 347 | }; |
| 348 | |
| 349 | static __devinit int wm831x_buckv_probe(struct platform_device *pdev) |
| 350 | { |
| 351 | struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); |
| 352 | struct wm831x_pdata *pdata = wm831x->dev->platform_data; |
| 353 | int id = pdev->id % ARRAY_SIZE(pdata->dcdc); |
| 354 | struct wm831x_dcdc *dcdc; |
| 355 | struct resource *res; |
| 356 | int ret, irq; |
| 357 | |
| 358 | dev_dbg(&pdev->dev, "Probing DCDC%d\n", id + 1); |
| 359 | |
| 360 | if (pdata == NULL || pdata->dcdc[id] == NULL) |
| 361 | return -ENODEV; |
| 362 | |
| 363 | dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL); |
| 364 | if (dcdc == NULL) { |
| 365 | dev_err(&pdev->dev, "Unable to allocate private data\n"); |
| 366 | return -ENOMEM; |
| 367 | } |
| 368 | |
| 369 | dcdc->wm831x = wm831x; |
| 370 | |
| 371 | res = platform_get_resource(pdev, IORESOURCE_IO, 0); |
| 372 | if (res == NULL) { |
| 373 | dev_err(&pdev->dev, "No I/O resource\n"); |
| 374 | ret = -EINVAL; |
| 375 | goto err; |
| 376 | } |
| 377 | dcdc->base = res->start; |
| 378 | |
| 379 | snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1); |
| 380 | dcdc->desc.name = dcdc->name; |
| 381 | dcdc->desc.id = id; |
| 382 | dcdc->desc.type = REGULATOR_VOLTAGE; |
| 383 | dcdc->desc.n_voltages = WM831X_BUCKV_MAX_SELECTOR + 1; |
| 384 | dcdc->desc.ops = &wm831x_buckv_ops; |
| 385 | dcdc->desc.owner = THIS_MODULE; |
| 386 | |
| 387 | dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev, |
| 388 | pdata->dcdc[id], dcdc); |
| 389 | if (IS_ERR(dcdc->regulator)) { |
| 390 | ret = PTR_ERR(dcdc->regulator); |
| 391 | dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n", |
| 392 | id + 1, ret); |
| 393 | goto err; |
| 394 | } |
| 395 | |
| 396 | irq = platform_get_irq_byname(pdev, "UV"); |
| 397 | ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_uv_irq, |
| 398 | IRQF_TRIGGER_RISING, dcdc->name, |
| 399 | dcdc); |
| 400 | if (ret != 0) { |
| 401 | dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n", |
| 402 | irq, ret); |
| 403 | goto err_regulator; |
| 404 | } |
| 405 | |
| 406 | irq = platform_get_irq_byname(pdev, "HC"); |
| 407 | ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_oc_irq, |
| 408 | IRQF_TRIGGER_RISING, dcdc->name, |
| 409 | dcdc); |
| 410 | if (ret != 0) { |
| 411 | dev_err(&pdev->dev, "Failed to request HC IRQ %d: %d\n", |
| 412 | irq, ret); |
| 413 | goto err_uv; |
| 414 | } |
| 415 | |
| 416 | platform_set_drvdata(pdev, dcdc); |
| 417 | |
| 418 | return 0; |
| 419 | |
| 420 | err_uv: |
| 421 | wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc); |
| 422 | err_regulator: |
| 423 | regulator_unregister(dcdc->regulator); |
| 424 | err: |
| 425 | kfree(dcdc); |
| 426 | return ret; |
| 427 | } |
| 428 | |
| 429 | static __devexit int wm831x_buckv_remove(struct platform_device *pdev) |
| 430 | { |
| 431 | struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev); |
| 432 | struct wm831x *wm831x = dcdc->wm831x; |
| 433 | |
| 434 | wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "HC"), dcdc); |
| 435 | wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc); |
| 436 | regulator_unregister(dcdc->regulator); |
| 437 | kfree(dcdc); |
| 438 | |
| 439 | return 0; |
| 440 | } |
| 441 | |
| 442 | static struct platform_driver wm831x_buckv_driver = { |
| 443 | .probe = wm831x_buckv_probe, |
| 444 | .remove = __devexit_p(wm831x_buckv_remove), |
| 445 | .driver = { |
| 446 | .name = "wm831x-buckv", |
| 447 | }, |
| 448 | }; |
| 449 | |
| 450 | /* |
| 451 | * BUCKP specifics |
| 452 | */ |
| 453 | |
| 454 | static int wm831x_buckp_list_voltage(struct regulator_dev *rdev, |
| 455 | unsigned selector) |
| 456 | { |
| 457 | if (selector <= WM831X_BUCKP_MAX_SELECTOR) |
| 458 | return 850000 + (selector * 25000); |
| 459 | else |
| 460 | return -EINVAL; |
| 461 | } |
| 462 | |
| 463 | static int wm831x_buckp_set_voltage_int(struct regulator_dev *rdev, int reg, |
| 464 | int min_uV, int max_uV) |
| 465 | { |
| 466 | struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); |
| 467 | struct wm831x *wm831x = dcdc->wm831x; |
| 468 | u16 vsel; |
| 469 | |
| 470 | if (min_uV <= 34000000) |
| 471 | vsel = (min_uV - 850000) / 25000; |
| 472 | else |
| 473 | return -EINVAL; |
| 474 | |
| 475 | if (wm831x_buckp_list_voltage(rdev, vsel) > max_uV) |
| 476 | return -EINVAL; |
| 477 | |
| 478 | return wm831x_set_bits(wm831x, reg, WM831X_DC3_ON_VSEL_MASK, vsel); |
| 479 | } |
| 480 | |
| 481 | static int wm831x_buckp_set_voltage(struct regulator_dev *rdev, |
| 482 | int min_uV, int max_uV) |
| 483 | { |
| 484 | struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); |
| 485 | u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG; |
| 486 | |
| 487 | return wm831x_buckp_set_voltage_int(rdev, reg, min_uV, max_uV); |
| 488 | } |
| 489 | |
| 490 | static int wm831x_buckp_set_suspend_voltage(struct regulator_dev *rdev, |
| 491 | int uV) |
| 492 | { |
| 493 | struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); |
| 494 | u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL; |
| 495 | |
| 496 | return wm831x_buckp_set_voltage_int(rdev, reg, uV, uV); |
| 497 | } |
| 498 | |
| 499 | static int wm831x_buckp_get_voltage(struct regulator_dev *rdev) |
| 500 | { |
| 501 | struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); |
| 502 | struct wm831x *wm831x = dcdc->wm831x; |
| 503 | u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG; |
| 504 | int val; |
| 505 | |
| 506 | val = wm831x_reg_read(wm831x, reg); |
| 507 | if (val < 0) |
| 508 | return val; |
| 509 | |
| 510 | return wm831x_buckp_list_voltage(rdev, val & WM831X_DC3_ON_VSEL_MASK); |
| 511 | } |
| 512 | |
| 513 | static struct regulator_ops wm831x_buckp_ops = { |
| 514 | .set_voltage = wm831x_buckp_set_voltage, |
| 515 | .get_voltage = wm831x_buckp_get_voltage, |
| 516 | .list_voltage = wm831x_buckp_list_voltage, |
| 517 | .set_suspend_voltage = wm831x_buckp_set_suspend_voltage, |
| 518 | |
| 519 | .is_enabled = wm831x_dcdc_is_enabled, |
| 520 | .enable = wm831x_dcdc_enable, |
| 521 | .disable = wm831x_dcdc_disable, |
| 522 | .get_status = wm831x_dcdc_get_status, |
| 523 | .get_mode = wm831x_dcdc_get_mode, |
| 524 | .set_mode = wm831x_dcdc_set_mode, |
| 525 | .set_suspend_mode = wm831x_dcdc_set_suspend_mode, |
| 526 | }; |
| 527 | |
| 528 | static __devinit int wm831x_buckp_probe(struct platform_device *pdev) |
| 529 | { |
| 530 | struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); |
| 531 | struct wm831x_pdata *pdata = wm831x->dev->platform_data; |
| 532 | int id = pdev->id % ARRAY_SIZE(pdata->dcdc); |
| 533 | struct wm831x_dcdc *dcdc; |
| 534 | struct resource *res; |
| 535 | int ret, irq; |
| 536 | |
| 537 | dev_dbg(&pdev->dev, "Probing DCDC%d\n", id + 1); |
| 538 | |
| 539 | if (pdata == NULL || pdata->dcdc[id] == NULL) |
| 540 | return -ENODEV; |
| 541 | |
| 542 | dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL); |
| 543 | if (dcdc == NULL) { |
| 544 | dev_err(&pdev->dev, "Unable to allocate private data\n"); |
| 545 | return -ENOMEM; |
| 546 | } |
| 547 | |
| 548 | dcdc->wm831x = wm831x; |
| 549 | |
| 550 | res = platform_get_resource(pdev, IORESOURCE_IO, 0); |
| 551 | if (res == NULL) { |
| 552 | dev_err(&pdev->dev, "No I/O resource\n"); |
| 553 | ret = -EINVAL; |
| 554 | goto err; |
| 555 | } |
| 556 | dcdc->base = res->start; |
| 557 | |
| 558 | snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1); |
| 559 | dcdc->desc.name = dcdc->name; |
| 560 | dcdc->desc.id = id; |
| 561 | dcdc->desc.type = REGULATOR_VOLTAGE; |
| 562 | dcdc->desc.n_voltages = WM831X_BUCKP_MAX_SELECTOR + 1; |
| 563 | dcdc->desc.ops = &wm831x_buckp_ops; |
| 564 | dcdc->desc.owner = THIS_MODULE; |
| 565 | |
| 566 | dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev, |
| 567 | pdata->dcdc[id], dcdc); |
| 568 | if (IS_ERR(dcdc->regulator)) { |
| 569 | ret = PTR_ERR(dcdc->regulator); |
| 570 | dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n", |
| 571 | id + 1, ret); |
| 572 | goto err; |
| 573 | } |
| 574 | |
| 575 | irq = platform_get_irq_byname(pdev, "UV"); |
| 576 | ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_uv_irq, |
| 577 | IRQF_TRIGGER_RISING, dcdc->name, |
| 578 | dcdc); |
| 579 | if (ret != 0) { |
| 580 | dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n", |
| 581 | irq, ret); |
| 582 | goto err_regulator; |
| 583 | } |
| 584 | |
| 585 | platform_set_drvdata(pdev, dcdc); |
| 586 | |
| 587 | return 0; |
| 588 | |
| 589 | err_regulator: |
| 590 | regulator_unregister(dcdc->regulator); |
| 591 | err: |
| 592 | kfree(dcdc); |
| 593 | return ret; |
| 594 | } |
| 595 | |
| 596 | static __devexit int wm831x_buckp_remove(struct platform_device *pdev) |
| 597 | { |
| 598 | struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev); |
| 599 | struct wm831x *wm831x = dcdc->wm831x; |
| 600 | |
| 601 | wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc); |
| 602 | regulator_unregister(dcdc->regulator); |
| 603 | kfree(dcdc); |
| 604 | |
| 605 | return 0; |
| 606 | } |
| 607 | |
| 608 | static struct platform_driver wm831x_buckp_driver = { |
| 609 | .probe = wm831x_buckp_probe, |
| 610 | .remove = __devexit_p(wm831x_buckp_remove), |
| 611 | .driver = { |
| 612 | .name = "wm831x-buckp", |
| 613 | }, |
| 614 | }; |
| 615 | |
Mark Brown | 8267a9b | 2009-07-28 15:22:23 +0100 | [diff] [blame] | 616 | /* |
Mark Brown | 1304850 | 2009-07-28 15:23:16 +0100 | [diff] [blame] | 617 | * DCDC boost convertors |
| 618 | */ |
| 619 | |
| 620 | static int wm831x_boostp_get_status(struct regulator_dev *rdev) |
| 621 | { |
| 622 | struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); |
| 623 | struct wm831x *wm831x = dcdc->wm831x; |
| 624 | int ret; |
| 625 | |
| 626 | /* First, check for errors */ |
| 627 | ret = wm831x_reg_read(wm831x, WM831X_DCDC_UV_STATUS); |
| 628 | if (ret < 0) |
| 629 | return ret; |
| 630 | |
| 631 | if (ret & (1 << rdev_get_id(rdev))) { |
| 632 | dev_dbg(wm831x->dev, "DCDC%d under voltage\n", |
| 633 | rdev_get_id(rdev) + 1); |
| 634 | return REGULATOR_STATUS_ERROR; |
| 635 | } |
| 636 | |
| 637 | /* Is the regulator on? */ |
| 638 | ret = wm831x_reg_read(wm831x, WM831X_DCDC_STATUS); |
| 639 | if (ret < 0) |
| 640 | return ret; |
| 641 | if (ret & (1 << rdev_get_id(rdev))) |
| 642 | return REGULATOR_STATUS_ON; |
| 643 | else |
| 644 | return REGULATOR_STATUS_OFF; |
| 645 | } |
| 646 | |
| 647 | static struct regulator_ops wm831x_boostp_ops = { |
| 648 | .get_status = wm831x_boostp_get_status, |
| 649 | |
| 650 | .is_enabled = wm831x_dcdc_is_enabled, |
| 651 | .enable = wm831x_dcdc_enable, |
| 652 | .disable = wm831x_dcdc_disable, |
| 653 | }; |
| 654 | |
| 655 | static __devinit int wm831x_boostp_probe(struct platform_device *pdev) |
| 656 | { |
| 657 | struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); |
| 658 | struct wm831x_pdata *pdata = wm831x->dev->platform_data; |
| 659 | int id = pdev->id % ARRAY_SIZE(pdata->dcdc); |
| 660 | struct wm831x_dcdc *dcdc; |
| 661 | struct resource *res; |
| 662 | int ret, irq; |
| 663 | |
| 664 | dev_dbg(&pdev->dev, "Probing DCDC%d\n", id + 1); |
| 665 | |
| 666 | if (pdata == NULL || pdata->dcdc[id] == NULL) |
| 667 | return -ENODEV; |
| 668 | |
| 669 | dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL); |
| 670 | if (dcdc == NULL) { |
| 671 | dev_err(&pdev->dev, "Unable to allocate private data\n"); |
| 672 | return -ENOMEM; |
| 673 | } |
| 674 | |
| 675 | dcdc->wm831x = wm831x; |
| 676 | |
| 677 | res = platform_get_resource(pdev, IORESOURCE_IO, 0); |
| 678 | if (res == NULL) { |
| 679 | dev_err(&pdev->dev, "No I/O resource\n"); |
| 680 | ret = -EINVAL; |
| 681 | goto err; |
| 682 | } |
| 683 | dcdc->base = res->start; |
| 684 | |
| 685 | snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1); |
| 686 | dcdc->desc.name = dcdc->name; |
| 687 | dcdc->desc.id = id; |
| 688 | dcdc->desc.type = REGULATOR_VOLTAGE; |
| 689 | dcdc->desc.ops = &wm831x_boostp_ops; |
| 690 | dcdc->desc.owner = THIS_MODULE; |
| 691 | |
| 692 | dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev, |
| 693 | pdata->dcdc[id], dcdc); |
| 694 | if (IS_ERR(dcdc->regulator)) { |
| 695 | ret = PTR_ERR(dcdc->regulator); |
| 696 | dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n", |
| 697 | id + 1, ret); |
| 698 | goto err; |
| 699 | } |
| 700 | |
| 701 | irq = platform_get_irq_byname(pdev, "UV"); |
| 702 | ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_uv_irq, |
| 703 | IRQF_TRIGGER_RISING, dcdc->name, |
| 704 | dcdc); |
| 705 | if (ret != 0) { |
| 706 | dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n", |
| 707 | irq, ret); |
| 708 | goto err_regulator; |
| 709 | } |
| 710 | |
| 711 | platform_set_drvdata(pdev, dcdc); |
| 712 | |
| 713 | return 0; |
| 714 | |
| 715 | err_regulator: |
| 716 | regulator_unregister(dcdc->regulator); |
| 717 | err: |
| 718 | kfree(dcdc); |
| 719 | return ret; |
| 720 | } |
| 721 | |
| 722 | static __devexit int wm831x_boostp_remove(struct platform_device *pdev) |
| 723 | { |
| 724 | struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev); |
| 725 | struct wm831x *wm831x = dcdc->wm831x; |
| 726 | |
| 727 | wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc); |
| 728 | regulator_unregister(dcdc->regulator); |
| 729 | kfree(dcdc); |
| 730 | |
| 731 | return 0; |
| 732 | } |
| 733 | |
| 734 | static struct platform_driver wm831x_boostp_driver = { |
| 735 | .probe = wm831x_boostp_probe, |
| 736 | .remove = __devexit_p(wm831x_boostp_remove), |
| 737 | .driver = { |
| 738 | .name = "wm831x-boostp", |
| 739 | }, |
| 740 | }; |
| 741 | |
| 742 | /* |
Mark Brown | 8267a9b | 2009-07-28 15:22:23 +0100 | [diff] [blame] | 743 | * External Power Enable |
| 744 | * |
| 745 | * These aren't actually DCDCs but look like them in hardware so share |
| 746 | * code. |
| 747 | */ |
| 748 | |
| 749 | #define WM831X_EPE_BASE 6 |
| 750 | |
| 751 | static struct regulator_ops wm831x_epe_ops = { |
| 752 | .is_enabled = wm831x_dcdc_is_enabled, |
| 753 | .enable = wm831x_dcdc_enable, |
| 754 | .disable = wm831x_dcdc_disable, |
| 755 | .get_status = wm831x_dcdc_get_status, |
| 756 | }; |
| 757 | |
| 758 | static __devinit int wm831x_epe_probe(struct platform_device *pdev) |
| 759 | { |
| 760 | struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); |
| 761 | struct wm831x_pdata *pdata = wm831x->dev->platform_data; |
| 762 | int id = pdev->id % ARRAY_SIZE(pdata->epe); |
| 763 | struct wm831x_dcdc *dcdc; |
| 764 | int ret; |
| 765 | |
| 766 | dev_dbg(&pdev->dev, "Probing EPE%d\n", id + 1); |
| 767 | |
| 768 | if (pdata == NULL || pdata->epe[id] == NULL) |
| 769 | return -ENODEV; |
| 770 | |
| 771 | dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL); |
| 772 | if (dcdc == NULL) { |
| 773 | dev_err(&pdev->dev, "Unable to allocate private data\n"); |
| 774 | return -ENOMEM; |
| 775 | } |
| 776 | |
| 777 | dcdc->wm831x = wm831x; |
| 778 | |
| 779 | /* For current parts this is correct; probably need to revisit |
| 780 | * in future. |
| 781 | */ |
| 782 | snprintf(dcdc->name, sizeof(dcdc->name), "EPE%d", id + 1); |
| 783 | dcdc->desc.name = dcdc->name; |
| 784 | dcdc->desc.id = id + WM831X_EPE_BASE; /* Offset in DCDC registers */ |
| 785 | dcdc->desc.ops = &wm831x_epe_ops; |
| 786 | dcdc->desc.type = REGULATOR_VOLTAGE; |
| 787 | dcdc->desc.owner = THIS_MODULE; |
| 788 | |
| 789 | dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev, |
| 790 | pdata->epe[id], dcdc); |
| 791 | if (IS_ERR(dcdc->regulator)) { |
| 792 | ret = PTR_ERR(dcdc->regulator); |
| 793 | dev_err(wm831x->dev, "Failed to register EPE%d: %d\n", |
| 794 | id + 1, ret); |
| 795 | goto err; |
| 796 | } |
| 797 | |
| 798 | platform_set_drvdata(pdev, dcdc); |
| 799 | |
| 800 | return 0; |
| 801 | |
| 802 | err: |
| 803 | kfree(dcdc); |
| 804 | return ret; |
| 805 | } |
| 806 | |
| 807 | static __devexit int wm831x_epe_remove(struct platform_device *pdev) |
| 808 | { |
| 809 | struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev); |
| 810 | |
| 811 | regulator_unregister(dcdc->regulator); |
| 812 | kfree(dcdc); |
| 813 | |
| 814 | return 0; |
| 815 | } |
| 816 | |
| 817 | static struct platform_driver wm831x_epe_driver = { |
| 818 | .probe = wm831x_epe_probe, |
| 819 | .remove = __devexit_p(wm831x_epe_remove), |
| 820 | .driver = { |
| 821 | .name = "wm831x-epe", |
| 822 | }, |
| 823 | }; |
| 824 | |
Mark Brown | e4ee831 | 2009-07-28 15:21:49 +0100 | [diff] [blame] | 825 | static int __init wm831x_dcdc_init(void) |
| 826 | { |
| 827 | int ret; |
| 828 | ret = platform_driver_register(&wm831x_buckv_driver); |
| 829 | if (ret != 0) |
| 830 | pr_err("Failed to register WM831x BUCKV driver: %d\n", ret); |
| 831 | |
| 832 | ret = platform_driver_register(&wm831x_buckp_driver); |
| 833 | if (ret != 0) |
| 834 | pr_err("Failed to register WM831x BUCKP driver: %d\n", ret); |
| 835 | |
Mark Brown | 1304850 | 2009-07-28 15:23:16 +0100 | [diff] [blame] | 836 | ret = platform_driver_register(&wm831x_boostp_driver); |
| 837 | if (ret != 0) |
| 838 | pr_err("Failed to register WM831x BOOST driver: %d\n", ret); |
| 839 | |
Mark Brown | 8267a9b | 2009-07-28 15:22:23 +0100 | [diff] [blame] | 840 | ret = platform_driver_register(&wm831x_epe_driver); |
| 841 | if (ret != 0) |
| 842 | pr_err("Failed to register WM831x EPE driver: %d\n", ret); |
| 843 | |
Mark Brown | e4ee831 | 2009-07-28 15:21:49 +0100 | [diff] [blame] | 844 | return 0; |
| 845 | } |
| 846 | subsys_initcall(wm831x_dcdc_init); |
| 847 | |
| 848 | static void __exit wm831x_dcdc_exit(void) |
| 849 | { |
Mark Brown | 8267a9b | 2009-07-28 15:22:23 +0100 | [diff] [blame] | 850 | platform_driver_unregister(&wm831x_epe_driver); |
Mark Brown | 1304850 | 2009-07-28 15:23:16 +0100 | [diff] [blame] | 851 | platform_driver_unregister(&wm831x_boostp_driver); |
Mark Brown | e4ee831 | 2009-07-28 15:21:49 +0100 | [diff] [blame] | 852 | platform_driver_unregister(&wm831x_buckp_driver); |
| 853 | platform_driver_unregister(&wm831x_buckv_driver); |
| 854 | } |
| 855 | module_exit(wm831x_dcdc_exit); |
| 856 | |
| 857 | /* Module information */ |
| 858 | MODULE_AUTHOR("Mark Brown"); |
| 859 | MODULE_DESCRIPTION("WM831x DC-DC convertor driver"); |
| 860 | MODULE_LICENSE("GPL"); |
| 861 | MODULE_ALIAS("platform:wm831x-buckv"); |
| 862 | MODULE_ALIAS("platform:wm831x-buckp"); |