Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame^] | 1 | /* |
| 2 | * Wavelan Pcmcia driver |
| 3 | * |
| 4 | * Jean II - HPLB '96 |
| 5 | * |
| 6 | * Reorganisation and extension of the driver. |
| 7 | * |
| 8 | * This file contain all definition and declarations necessary for the |
| 9 | * wavelan pcmcia driver. This file is a private header, so it should |
| 10 | * be included only on wavelan_cs.c !!! |
| 11 | */ |
| 12 | |
| 13 | #ifndef WAVELAN_CS_P_H |
| 14 | #define WAVELAN_CS_P_H |
| 15 | |
| 16 | /************************** DOCUMENTATION **************************/ |
| 17 | /* |
| 18 | * This driver provide a Linux interface to the Wavelan Pcmcia hardware |
| 19 | * The Wavelan is a product of Lucent (http://www.wavelan.com/). |
| 20 | * This division was formerly part of NCR and then AT&T. |
| 21 | * Wavelan are also distributed by DEC (RoamAbout DS)... |
| 22 | * |
| 23 | * To know how to use this driver, read the PCMCIA HOWTO. |
| 24 | * If you want to exploit the many other fonctionalities, look comments |
| 25 | * in the code... |
| 26 | * |
| 27 | * This driver is the result of the effort of many peoples (see below). |
| 28 | */ |
| 29 | |
| 30 | /* ------------------------ SPECIFIC NOTES ------------------------ */ |
| 31 | /* |
| 32 | * Web page |
| 33 | * -------- |
| 34 | * I try to maintain a web page with the Wireless LAN Howto at : |
| 35 | * http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Wavelan.html |
| 36 | * |
| 37 | * SMP |
| 38 | * --- |
| 39 | * We now are SMP compliant (I eventually fixed the remaining bugs). |
| 40 | * The driver has been tested on a dual P6-150 and survived my usual |
| 41 | * set of torture tests. |
| 42 | * Anyway, I spent enough time chasing interrupt re-entrancy during |
| 43 | * errors or reconfigure, and I designed the locked/unlocked sections |
| 44 | * of the driver with great care, and with the recent addition of |
| 45 | * the spinlock (thanks to the new API), we should be quite close to |
| 46 | * the truth. |
| 47 | * The SMP/IRQ locking is quite coarse and conservative (i.e. not fast), |
| 48 | * but better safe than sorry (especially at 2 Mb/s ;-). |
| 49 | * |
| 50 | * I have also looked into disabling only our interrupt on the card |
| 51 | * (via HACR) instead of all interrupts in the processor (via cli), |
| 52 | * so that other driver are not impacted, and it look like it's |
| 53 | * possible, but it's very tricky to do right (full of races). As |
| 54 | * the gain would be mostly for SMP systems, it can wait... |
| 55 | * |
| 56 | * Debugging and options |
| 57 | * --------------------- |
| 58 | * You will find below a set of '#define" allowing a very fine control |
| 59 | * on the driver behaviour and the debug messages printed. |
| 60 | * The main options are : |
| 61 | * o WAVELAN_ROAMING, for the experimental roaming support. |
| 62 | * o SET_PSA_CRC, to have your card correctly recognised by |
| 63 | * an access point and the Point-to-Point diagnostic tool. |
| 64 | * o USE_PSA_CONFIG, to read configuration from the PSA (EEprom) |
| 65 | * (otherwise we always start afresh with some defaults) |
| 66 | * |
| 67 | * wavelan_cs.o is darn too big |
| 68 | * ------------------------- |
| 69 | * That's true ! There is a very simple way to reduce the driver |
| 70 | * object by 33% (yes !). Comment out the following line : |
| 71 | * #include <linux/wireless.h> |
| 72 | * Other compile options can also reduce the size of it... |
| 73 | * |
| 74 | * MAC address and hardware detection : |
| 75 | * ---------------------------------- |
| 76 | * The detection code of the wavelan chech that the first 3 |
| 77 | * octets of the MAC address fit the company code. This type of |
| 78 | * detection work well for AT&T cards (because the AT&T code is |
| 79 | * hardcoded in wavelan_cs.h), but of course will fail for other |
| 80 | * manufacturer. |
| 81 | * |
| 82 | * If you are sure that your card is derived from the wavelan, |
| 83 | * here is the way to configure it : |
| 84 | * 1) Get your MAC address |
| 85 | * a) With your card utilities (wfreqsel, instconf, ...) |
| 86 | * b) With the driver : |
| 87 | * o compile the kernel with DEBUG_CONFIG_INFO enabled |
| 88 | * o Boot and look the card messages |
| 89 | * 2) Set your MAC code (3 octets) in MAC_ADDRESSES[][3] (wavelan_cs.h) |
| 90 | * 3) Compile & verify |
| 91 | * 4) Send me the MAC code - I will include it in the next version... |
| 92 | * |
| 93 | */ |
| 94 | |
| 95 | /* --------------------- WIRELESS EXTENSIONS --------------------- */ |
| 96 | /* |
| 97 | * This driver is the first one to support "wireless extensions". |
| 98 | * This set of extensions provide you some way to control the wireless |
| 99 | * caracteristics of the hardware in a standard way and support for |
| 100 | * applications for taking advantage of it (like Mobile IP). |
| 101 | * |
| 102 | * You will need to enable the CONFIG_NET_RADIO define in the kernel |
| 103 | * configuration to enable the wireless extensions (this is the one |
| 104 | * giving access to the radio network device choice). |
| 105 | * |
| 106 | * It might also be a good idea as well to fetch the wireless tools to |
| 107 | * configure the device and play a bit. |
| 108 | */ |
| 109 | |
| 110 | /* ---------------------------- FILES ---------------------------- */ |
| 111 | /* |
| 112 | * wavelan_cs.c : The actual code for the driver - C functions |
| 113 | * |
| 114 | * wavelan_cs.p.h : Private header : local types / vars for the driver |
| 115 | * |
| 116 | * wavelan_cs.h : Description of the hardware interface & structs |
| 117 | * |
| 118 | * i82593.h : Description if the Ethernet controller |
| 119 | */ |
| 120 | |
| 121 | /* --------------------------- HISTORY --------------------------- */ |
| 122 | /* |
| 123 | * The history of the Wavelan drivers is as complicated as history of |
| 124 | * the Wavelan itself (NCR -> AT&T -> Lucent). |
| 125 | * |
| 126 | * All started with Anders Klemets <klemets@paul.rutgers.edu>, |
| 127 | * writting a Wavelan ISA driver for the MACH microkernel. Girish |
| 128 | * Welling <welling@paul.rutgers.edu> had also worked on it. |
| 129 | * Keith Moore modify this for the Pcmcia hardware. |
| 130 | * |
| 131 | * Robert Morris <rtm@das.harvard.edu> port these two drivers to BSDI |
| 132 | * and add specific Pcmcia support (there is currently no equivalent |
| 133 | * of the PCMCIA package under BSD...). |
| 134 | * |
| 135 | * Jim Binkley <jrb@cs.pdx.edu> port both BSDI drivers to FreeBSD. |
| 136 | * |
| 137 | * Bruce Janson <bruce@cs.usyd.edu.au> port the BSDI ISA driver to Linux. |
| 138 | * |
| 139 | * Anthony D. Joseph <adj@lcs.mit.edu> started modify Bruce driver |
| 140 | * (with help of the BSDI PCMCIA driver) for PCMCIA. |
| 141 | * Yunzhou Li <yunzhou@strat.iol.unh.edu> finished is work. |
| 142 | * Joe Finney <joe@comp.lancs.ac.uk> patched the driver to start |
| 143 | * correctly 2.00 cards (2.4 GHz with frequency selection). |
| 144 | * David Hinds <dahinds@users.sourceforge.net> integrated the whole in his |
| 145 | * Pcmcia package (+ bug corrections). |
| 146 | * |
| 147 | * I (Jean Tourrilhes - jt@hplb.hpl.hp.com) then started to make some |
| 148 | * patchs to the Pcmcia driver. After, I added code in the ISA driver |
| 149 | * for Wireless Extensions and full support of frequency selection |
| 150 | * cards. Now, I'm doing the same to the Pcmcia driver + some |
| 151 | * reorganisation. |
| 152 | * Loeke Brederveld <lbrederv@wavelan.com> from Lucent has given me |
| 153 | * much needed informations on the Wavelan hardware. |
| 154 | */ |
| 155 | |
| 156 | /* By the way : for the copyright & legal stuff : |
| 157 | * Almost everybody wrote code under GNU or BSD license (or alike), |
| 158 | * and want that their original copyright remain somewhere in the |
| 159 | * code (for myself, I go with the GPL). |
| 160 | * Nobody want to take responsibility for anything, except the fame... |
| 161 | */ |
| 162 | |
| 163 | /* --------------------------- CREDITS --------------------------- */ |
| 164 | /* |
| 165 | * Credits: |
| 166 | * Special thanks to Jan Hoogendoorn of AT&T GIS Utrecht and |
| 167 | * Loeke Brederveld of Lucent for providing extremely useful |
| 168 | * information about WaveLAN PCMCIA hardware |
| 169 | * |
| 170 | * This driver is based upon several other drivers, in particular: |
| 171 | * David Hinds' Linux driver for the PCMCIA 3c589 ethernet adapter |
| 172 | * Bruce Janson's Linux driver for the AT-bus WaveLAN adapter |
| 173 | * Anders Klemets' PCMCIA WaveLAN adapter driver |
| 174 | * Robert Morris' BSDI driver for the PCMCIA WaveLAN adapter |
| 175 | * |
| 176 | * Additional Credits: |
| 177 | * |
| 178 | * This software was originally developed under Linux 1.2.3 |
| 179 | * (Slackware 2.0 distribution). |
| 180 | * And then under Linux 2.0.x (Debian 1.1 -> 2.2 - pcmcia 2.8.18+) |
| 181 | * with an HP OmniBook 4000 and then a 5500. |
| 182 | * |
| 183 | * It is based on other device drivers and information either written |
| 184 | * or supplied by: |
| 185 | * James Ashton (jaa101@syseng.anu.edu.au), |
| 186 | * Ajay Bakre (bakre@paul.rutgers.edu), |
| 187 | * Donald Becker (becker@super.org), |
| 188 | * Jim Binkley <jrb@cs.pdx.edu>, |
| 189 | * Loeke Brederveld <lbrederv@wavelan.com>, |
| 190 | * Allan Creighton (allanc@cs.su.oz.au), |
| 191 | * Brent Elphick <belphick@uwaterloo.ca>, |
| 192 | * Joe Finney <joe@comp.lancs.ac.uk>, |
| 193 | * Matthew Geier (matthew@cs.su.oz.au), |
| 194 | * Remo di Giovanni (remo@cs.su.oz.au), |
| 195 | * Mark Hagan (mhagan@wtcpost.daytonoh.NCR.COM), |
| 196 | * David Hinds <dahinds@users.sourceforge.net>, |
| 197 | * Jan Hoogendoorn (c/o marteijn@lucent.com), |
| 198 | * Bruce Janson <bruce@cs.usyd.edu.au>, |
| 199 | * Anthony D. Joseph <adj@lcs.mit.edu>, |
| 200 | * Anders Klemets (klemets@paul.rutgers.edu), |
| 201 | * Yunzhou Li <yunzhou@strat.iol.unh.edu>, |
| 202 | * Marc Meertens (mmeertens@lucent.com), |
| 203 | * Keith Moore, |
| 204 | * Robert Morris (rtm@das.harvard.edu), |
| 205 | * Ian Parkin (ian@cs.su.oz.au), |
| 206 | * John Rosenberg (johnr@cs.su.oz.au), |
| 207 | * George Rossi (george@phm.gov.au), |
| 208 | * Arthur Scott (arthur@cs.su.oz.au), |
| 209 | * Stanislav Sinyagin <stas@isf.ru> |
| 210 | * Peter Storey, |
| 211 | * Jean Tourrilhes <jt@hpl.hp.com>, |
| 212 | * Girish Welling (welling@paul.rutgers.edu) |
| 213 | * Clark Woodworth <clark@hiway1.exit109.com> |
| 214 | * Yongguang Zhang <ygz@isl.hrl.hac.com>... |
| 215 | */ |
| 216 | |
| 217 | /* ------------------------- IMPROVEMENTS ------------------------- */ |
| 218 | /* |
| 219 | * I proudly present : |
| 220 | * |
| 221 | * Changes made in 2.8.22 : |
| 222 | * ---------------------- |
| 223 | * - improved wv_set_multicast_list |
| 224 | * - catch spurious interrupt |
| 225 | * - correct release of the device |
| 226 | * |
| 227 | * Changes mades in release : |
| 228 | * ------------------------ |
| 229 | * - Reorganisation of the code, function name change |
| 230 | * - Creation of private header (wavelan_cs.h) |
| 231 | * - Reorganised debug messages |
| 232 | * - More comments, history, ... |
| 233 | * - Configure earlier (in "insert" instead of "open") |
| 234 | * and do things only once |
| 235 | * - mmc_init : configure the PSA if not done |
| 236 | * - mmc_init : 2.00 detection better code for 2.00 init |
| 237 | * - better info at startup |
| 238 | * - Correct a HUGE bug (volatile & uncalibrated busy loop) |
| 239 | * in wv_82593_cmd => config speedup |
| 240 | * - Stop receiving & power down on close (and power up on open) |
| 241 | * use "ifconfig down" & "ifconfig up ; route add -net ..." |
| 242 | * - Send packets : add watchdog instead of pooling |
| 243 | * - Receive : check frame wrap around & try to recover some frames |
| 244 | * - wavelan_set_multicast_list : avoid reset |
| 245 | * - add wireless extensions (ioctl & get_wireless_stats) |
| 246 | * get/set nwid/frequency on fly, info for /proc/net/wireless |
| 247 | * - Suppress useless stuff from lp (net_local), but add link |
| 248 | * - More inlines |
| 249 | * - Lot of others minor details & cleanups |
| 250 | * |
| 251 | * Changes made in second release : |
| 252 | * ------------------------------ |
| 253 | * - Optimise wv_85893_reconfig stuff, fix potential problems |
| 254 | * - Change error values for ioctl |
| 255 | * - Non blocking wv_ru_stop() + call wv_reset() in case of problems |
| 256 | * - Remove development printk from wavelan_watchdog() |
| 257 | * - Remove of the watchdog to wavelan_close instead of wavelan_release |
| 258 | * fix potential problems... |
| 259 | * - Start debugging suspend stuff (but it's still a bit weird) |
| 260 | * - Debug & optimize dump header/packet in Rx & Tx (debug) |
| 261 | * - Use "readb" and "writeb" to be kernel 2.1 compliant |
| 262 | * - Better handling of bogus interrupts |
| 263 | * - Wireless extension : SETSPY and GETSPY |
| 264 | * - Remove old stuff (stats - for those needing it, just ask me...) |
| 265 | * - Make wireless extensions optional |
| 266 | * |
| 267 | * Changes made in third release : |
| 268 | * ----------------------------- |
| 269 | * - cleanups & typos |
| 270 | * - modif wireless ext (spy -> only one pointer) |
| 271 | * - new private ioctl to set/get quality & level threshold |
| 272 | * - Init : correct default value of level threshold for pcmcia |
| 273 | * - kill watchdog in hw_reset |
| 274 | * - more 2.1 support (copy_to/from_user instead of memcpy_to/fromfs) |
| 275 | * - Add message level (debug stuff in /var/adm/debug & errors not |
| 276 | * displayed at console and still in /var/adm/messages) |
| 277 | * |
| 278 | * Changes made in fourth release : |
| 279 | * ------------------------------ |
| 280 | * - multicast support (yes !) thanks to Yongguang Zhang. |
| 281 | * |
| 282 | * Changes made in fifth release (2.9.0) : |
| 283 | * ------------------------------------- |
| 284 | * - Revisited multicast code (it was mostly wrong). |
| 285 | * - protect code in wv_82593_reconfig with dev->tbusy (oups !) |
| 286 | * |
| 287 | * Changes made in sixth release (2.9.1a) : |
| 288 | * -------------------------------------- |
| 289 | * - Change the detection code for multi manufacturer code support |
| 290 | * - Correct bug (hang kernel) in init when we were "rejecting" a card |
| 291 | * |
| 292 | * Changes made in seventh release (2.9.1b) : |
| 293 | * ---------------------------------------- |
| 294 | * - Update to wireless extensions changes |
| 295 | * - Silly bug in card initial configuration (psa_conf_status) |
| 296 | * |
| 297 | * Changes made in eigth release : |
| 298 | * ----------------------------- |
| 299 | * - Small bug in debug code (probably not the last one...) |
| 300 | * - 1.2.13 support (thanks to Clark Woodworth) |
| 301 | * |
| 302 | * Changes made for release in 2.9.2b : |
| 303 | * ---------------------------------- |
| 304 | * - Level threshold is now a standard wireless extension (version 4 !) |
| 305 | * - modules parameters types for kernel > 2.1.17 |
| 306 | * - updated man page |
| 307 | * - Others cleanup from David Hinds |
| 308 | * |
| 309 | * Changes made for release in 2.9.5 : |
| 310 | * --------------------------------- |
| 311 | * - byte count stats (courtesy of David Hinds) |
| 312 | * - Remove dev_tint stuff (courtesy of David Hinds) |
| 313 | * - Others cleanup from David Hinds |
| 314 | * - Encryption setting from Brent Elphick (thanks a lot !) |
| 315 | * - 'base' to 'u_long' for the Alpha (thanks to Stanislav Sinyagin) |
| 316 | * |
| 317 | * Changes made for release in 2.9.6 : |
| 318 | * --------------------------------- |
| 319 | * - fix bug : no longuer disable watchdog in case of bogus interrupt |
| 320 | * - increase timeout in config code for picky hardware |
| 321 | * - mask unused bits in status (Wireless Extensions) |
| 322 | * |
| 323 | * Changes integrated by Justin Seger <jseger@MIT.EDU> & David Hinds : |
| 324 | * ----------------------------------------------------------------- |
| 325 | * - Roaming "hack" from Joe Finney <joe@comp.lancs.ac.uk> |
| 326 | * - PSA CRC code from Bob Gray <rgray@bald.cs.dartmouth.edu> |
| 327 | * - Better initialisation of the i82593 controller |
| 328 | * from Joseph K. O'Sullivan <josullvn+@cs.cmu.edu> |
| 329 | * |
| 330 | * Changes made for release in 3.0.10 : |
| 331 | * ---------------------------------- |
| 332 | * - Fix eject "hang" of the driver under 2.2.X : |
| 333 | * o create wv_flush_stale_links() |
| 334 | * o Rename wavelan_release to wv_pcmcia_release & move up |
| 335 | * o move unregister_netdev to wavelan_detach() |
| 336 | * o wavelan_release() no longer call wavelan_detach() |
| 337 | * o Suppress "release" timer |
| 338 | * o Other cleanups & fixes |
| 339 | * - New MAC address in the probe |
| 340 | * - Reorg PSA_CRC code (endian neutral & cleaner) |
| 341 | * - Correct initialisation of the i82593 from Lucent manual |
| 342 | * - Put back the watchdog, with larger timeout |
| 343 | * - TRANSMIT_NO_CRC is a "normal" error, so recover from it |
| 344 | * from Derrick J Brashear <shadow@dementia.org> |
| 345 | * - Better handling of TX and RX normal failure conditions |
| 346 | * - #ifdef out all the roaming code |
| 347 | * - Add ESSID & "AP current address" ioctl stubs |
| 348 | * - General cleanup of the code |
| 349 | * |
| 350 | * Changes made for release in 3.0.13 : |
| 351 | * ---------------------------------- |
| 352 | * - Re-enable compilation of roaming code by default, but with |
| 353 | * do_roaming = 0 |
| 354 | * - Nuke `nwid=nwid^ntohs(beacon->domain_id)' in wl_roam_gather |
| 355 | * at the demand of John Carol Langford <jcl@gs176.sp.cs.cmu.edu> |
| 356 | * - Introduced WAVELAN_ROAMING_EXT for incomplete ESSID stuff. |
| 357 | * |
| 358 | * Changes made for release in 3.0.15 : |
| 359 | * ---------------------------------- |
| 360 | * - Change e-mail and web page addresses |
| 361 | * - Watchdog timer is now correctly expressed in HZ, not in jiffies |
| 362 | * - Add channel number to the list of frequencies in range |
| 363 | * - Add the (short) list of bit-rates in range |
| 364 | * - Developp a new sensitivity... (sens.value & sens.fixed) |
| 365 | * |
| 366 | * Changes made for release in 3.1.2 : |
| 367 | * --------------------------------- |
| 368 | * - Fix check for root permission (break instead of exit) |
| 369 | * - New nwid & encoding setting (Wireless Extension 9) |
| 370 | * |
| 371 | * Changes made for release in 3.1.12 : |
| 372 | * ---------------------------------- |
| 373 | * - reworked wv_82593_cmd to avoid using the IRQ handler and doing |
| 374 | * ugly things with interrupts. |
| 375 | * - Add IRQ protection in 82593_config/ru_start/ru_stop/watchdog |
| 376 | * - Update to new network API (softnet - 2.3.43) : |
| 377 | * o replace dev->tbusy (David + me) |
| 378 | * o replace dev->tstart (David + me) |
| 379 | * o remove dev->interrupt (David) |
| 380 | * o add SMP locking via spinlock in splxx (me) |
| 381 | * o add spinlock in interrupt handler (me) |
| 382 | * o use kernel watchdog instead of ours (me) |
| 383 | * o verify that all the changes make sense and work (me) |
| 384 | * - Re-sync kernel/pcmcia versions (not much actually) |
| 385 | * - A few other cleanups (David & me)... |
| 386 | * |
| 387 | * Changes made for release in 3.1.22 : |
| 388 | * ---------------------------------- |
| 389 | * - Check that SMP works, remove annoying log message |
| 390 | * |
| 391 | * Changes made for release in 3.1.24 : |
| 392 | * ---------------------------------- |
| 393 | * - Fix unfrequent card lockup when watchdog was reseting the hardware : |
| 394 | * o control first busy loop in wv_82593_cmd() |
| 395 | * o Extend spinlock protection in wv_hw_config() |
| 396 | * |
| 397 | * Changes made for release in 3.1.33 : |
| 398 | * ---------------------------------- |
| 399 | * - Optional use new driver API for Wireless Extensions : |
| 400 | * o got rid of wavelan_ioctl() |
| 401 | * o use a bunch of iw_handler instead |
| 402 | * |
| 403 | * Changes made for release in 3.2.1 : |
| 404 | * --------------------------------- |
| 405 | * - Set dev->trans_start to avoid filling the logs |
| 406 | * (and generating useless abort commands) |
| 407 | * - Avoid deadlocks in mmc_out()/mmc_in() |
| 408 | * |
| 409 | * Wishes & dreams: |
| 410 | * ---------------- |
| 411 | * - Cleanup and integrate the roaming code |
| 412 | * (std debug, set DomainID, decay avg and co...) |
| 413 | */ |
| 414 | |
| 415 | /***************************** INCLUDES *****************************/ |
| 416 | |
| 417 | /* Linux headers that we need */ |
| 418 | #include <linux/config.h> |
| 419 | #include <linux/module.h> |
| 420 | #include <linux/kernel.h> |
| 421 | #include <linux/init.h> |
| 422 | #include <linux/sched.h> |
| 423 | #include <linux/ptrace.h> |
| 424 | #include <linux/slab.h> |
| 425 | #include <linux/string.h> |
| 426 | #include <linux/timer.h> |
| 427 | #include <linux/interrupt.h> |
| 428 | #include <linux/spinlock.h> |
| 429 | #include <linux/in.h> |
| 430 | #include <linux/delay.h> |
| 431 | #include <linux/bitops.h> |
| 432 | #include <asm/uaccess.h> |
| 433 | #include <asm/io.h> |
| 434 | #include <asm/system.h> |
| 435 | |
| 436 | #include <linux/netdevice.h> |
| 437 | #include <linux/etherdevice.h> |
| 438 | #include <linux/skbuff.h> |
| 439 | #include <linux/if_arp.h> |
| 440 | #include <linux/ioport.h> |
| 441 | #include <linux/fcntl.h> |
| 442 | #include <linux/ethtool.h> |
| 443 | |
| 444 | #ifdef CONFIG_NET_RADIO |
| 445 | #include <linux/wireless.h> /* Wireless extensions */ |
| 446 | #include <net/iw_handler.h> /* New driver API */ |
| 447 | #endif |
| 448 | |
| 449 | /* Pcmcia headers that we need */ |
| 450 | #include <pcmcia/cs_types.h> |
| 451 | #include <pcmcia/cs.h> |
| 452 | #include <pcmcia/cistpl.h> |
| 453 | #include <pcmcia/cisreg.h> |
| 454 | #include <pcmcia/ds.h> |
| 455 | #include <pcmcia/version.h> |
| 456 | |
| 457 | /* Wavelan declarations */ |
| 458 | #include "i82593.h" /* Definitions for the Intel chip */ |
| 459 | |
| 460 | #include "wavelan_cs.h" /* Others bits of the hardware */ |
| 461 | |
| 462 | /************************** DRIVER OPTIONS **************************/ |
| 463 | /* |
| 464 | * `#define' or `#undef' the following constant to change the behaviour |
| 465 | * of the driver... |
| 466 | */ |
| 467 | #define WAVELAN_ROAMING /* Include experimental roaming code */ |
| 468 | #undef WAVELAN_ROAMING_EXT /* Enable roaming wireless extensions */ |
| 469 | #undef SET_PSA_CRC /* Set the CRC in PSA (slower) */ |
| 470 | #define USE_PSA_CONFIG /* Use info from the PSA */ |
| 471 | #undef STRUCT_CHECK /* Verify padding of structures */ |
| 472 | #undef EEPROM_IS_PROTECTED /* Doesn't seem to be necessary */ |
| 473 | #define MULTICAST_AVOID /* Avoid extra multicast (I'm sceptical) */ |
| 474 | #undef SET_MAC_ADDRESS /* Experimental */ |
| 475 | |
| 476 | #ifdef WIRELESS_EXT /* If wireless extension exist in the kernel */ |
| 477 | /* Warning : these stuff will slow down the driver... */ |
| 478 | #define WIRELESS_SPY /* Enable spying addresses */ |
| 479 | #undef HISTOGRAM /* Enable histogram of sig level... */ |
| 480 | #endif |
| 481 | |
| 482 | /****************************** DEBUG ******************************/ |
| 483 | |
| 484 | #undef DEBUG_MODULE_TRACE /* Module insertion/removal */ |
| 485 | #undef DEBUG_CALLBACK_TRACE /* Calls made by Linux */ |
| 486 | #undef DEBUG_INTERRUPT_TRACE /* Calls to handler */ |
| 487 | #undef DEBUG_INTERRUPT_INFO /* type of interrupt & so on */ |
| 488 | #define DEBUG_INTERRUPT_ERROR /* problems */ |
| 489 | #undef DEBUG_CONFIG_TRACE /* Trace the config functions */ |
| 490 | #undef DEBUG_CONFIG_INFO /* What's going on... */ |
| 491 | #define DEBUG_CONFIG_ERRORS /* Errors on configuration */ |
| 492 | #undef DEBUG_TX_TRACE /* Transmission calls */ |
| 493 | #undef DEBUG_TX_INFO /* Header of the transmitted packet */ |
| 494 | #undef DEBUG_TX_FAIL /* Normal failure conditions */ |
| 495 | #define DEBUG_TX_ERROR /* Unexpected conditions */ |
| 496 | #undef DEBUG_RX_TRACE /* Transmission calls */ |
| 497 | #undef DEBUG_RX_INFO /* Header of the transmitted packet */ |
| 498 | #undef DEBUG_RX_FAIL /* Normal failure conditions */ |
| 499 | #define DEBUG_RX_ERROR /* Unexpected conditions */ |
| 500 | #undef DEBUG_PACKET_DUMP /* Dump packet on the screen */ |
| 501 | #undef DEBUG_IOCTL_TRACE /* Misc call by Linux */ |
| 502 | #undef DEBUG_IOCTL_INFO /* Various debug info */ |
| 503 | #define DEBUG_IOCTL_ERROR /* What's going wrong */ |
| 504 | #define DEBUG_BASIC_SHOW /* Show basic startup info */ |
| 505 | #undef DEBUG_VERSION_SHOW /* Print version info */ |
| 506 | #undef DEBUG_PSA_SHOW /* Dump psa to screen */ |
| 507 | #undef DEBUG_MMC_SHOW /* Dump mmc to screen */ |
| 508 | #undef DEBUG_SHOW_UNUSED /* Show also unused fields */ |
| 509 | #undef DEBUG_I82593_SHOW /* Show i82593 status */ |
| 510 | #undef DEBUG_DEVICE_SHOW /* Show device parameters */ |
| 511 | |
| 512 | /************************ CONSTANTS & MACROS ************************/ |
| 513 | |
| 514 | #ifdef DEBUG_VERSION_SHOW |
| 515 | static const char *version = "wavelan_cs.c : v24 (SMP + wireless extensions) 11/1/02\n"; |
| 516 | #endif |
| 517 | |
| 518 | /* Watchdog temporisation */ |
| 519 | #define WATCHDOG_JIFFIES (256*HZ/100) |
| 520 | |
| 521 | /* Fix a bug in some old wireless extension definitions */ |
| 522 | #ifndef IW_ESSID_MAX_SIZE |
| 523 | #define IW_ESSID_MAX_SIZE 32 |
| 524 | #endif |
| 525 | |
| 526 | /* ------------------------ PRIVATE IOCTL ------------------------ */ |
| 527 | |
| 528 | #define SIOCSIPQTHR SIOCIWFIRSTPRIV /* Set quality threshold */ |
| 529 | #define SIOCGIPQTHR SIOCIWFIRSTPRIV + 1 /* Get quality threshold */ |
| 530 | #define SIOCSIPROAM SIOCIWFIRSTPRIV + 2 /* Set roaming state */ |
| 531 | #define SIOCGIPROAM SIOCIWFIRSTPRIV + 3 /* Get roaming state */ |
| 532 | |
| 533 | #define SIOCSIPHISTO SIOCIWFIRSTPRIV + 4 /* Set histogram ranges */ |
| 534 | #define SIOCGIPHISTO SIOCIWFIRSTPRIV + 5 /* Get histogram values */ |
| 535 | |
| 536 | /*************************** WaveLAN Roaming **************************/ |
| 537 | #ifdef WAVELAN_ROAMING /* Conditional compile, see above in options */ |
| 538 | |
| 539 | #define WAVELAN_ROAMING_DEBUG 0 /* 1 = Trace of handover decisions */ |
| 540 | /* 2 = Info on each beacon rcvd... */ |
| 541 | #define MAX_WAVEPOINTS 7 /* Max visible at one time */ |
| 542 | #define WAVEPOINT_HISTORY 5 /* SNR sample history slow search */ |
| 543 | #define WAVEPOINT_FAST_HISTORY 2 /* SNR sample history fast search */ |
| 544 | #define SEARCH_THRESH_LOW 10 /* SNR to enter cell search */ |
| 545 | #define SEARCH_THRESH_HIGH 13 /* SNR to leave cell search */ |
| 546 | #define WAVELAN_ROAMING_DELTA 1 /* Hysteresis value (+/- SNR) */ |
| 547 | #define CELL_TIMEOUT 2*HZ /* in jiffies */ |
| 548 | |
| 549 | #define FAST_CELL_SEARCH 1 /* Boolean values... */ |
| 550 | #define NWID_PROMISC 1 /* for code clarity. */ |
| 551 | |
| 552 | typedef struct wavepoint_beacon |
| 553 | { |
| 554 | unsigned char dsap, /* Unused */ |
| 555 | ssap, /* Unused */ |
| 556 | ctrl, /* Unused */ |
| 557 | O,U,I, /* Unused */ |
| 558 | spec_id1, /* Unused */ |
| 559 | spec_id2, /* Unused */ |
| 560 | pdu_type, /* Unused */ |
| 561 | seq; /* WavePoint beacon sequence number */ |
| 562 | unsigned short domain_id, /* WavePoint Domain ID */ |
| 563 | nwid; /* WavePoint NWID */ |
| 564 | } wavepoint_beacon; |
| 565 | |
| 566 | typedef struct wavepoint_history |
| 567 | { |
| 568 | unsigned short nwid; /* WavePoint's NWID */ |
| 569 | int average_slow; /* SNR running average */ |
| 570 | int average_fast; /* SNR running average */ |
| 571 | unsigned char sigqual[WAVEPOINT_HISTORY]; /* Ringbuffer of recent SNR's */ |
| 572 | unsigned char qualptr; /* Index into ringbuffer */ |
| 573 | unsigned char last_seq; /* Last seq. no seen for WavePoint */ |
| 574 | struct wavepoint_history *next; /* Next WavePoint in table */ |
| 575 | struct wavepoint_history *prev; /* Previous WavePoint in table */ |
| 576 | unsigned long last_seen; /* Time of last beacon recvd, jiffies */ |
| 577 | } wavepoint_history; |
| 578 | |
| 579 | struct wavepoint_table |
| 580 | { |
| 581 | wavepoint_history *head; /* Start of ringbuffer */ |
| 582 | int num_wavepoints; /* No. of WavePoints visible */ |
| 583 | unsigned char locked; /* Table lock */ |
| 584 | }; |
| 585 | |
| 586 | #endif /* WAVELAN_ROAMING */ |
| 587 | |
| 588 | /****************************** TYPES ******************************/ |
| 589 | |
| 590 | /* Shortcuts */ |
| 591 | typedef struct net_device_stats en_stats; |
| 592 | typedef struct iw_statistics iw_stats; |
| 593 | typedef struct iw_quality iw_qual; |
| 594 | typedef struct iw_freq iw_freq; |
| 595 | typedef struct net_local net_local; |
| 596 | typedef struct timer_list timer_list; |
| 597 | |
| 598 | /* Basic types */ |
| 599 | typedef u_char mac_addr[WAVELAN_ADDR_SIZE]; /* Hardware address */ |
| 600 | |
| 601 | /* |
| 602 | * Static specific data for the interface. |
| 603 | * |
| 604 | * For each network interface, Linux keep data in two structure. "device" |
| 605 | * keep the generic data (same format for everybody) and "net_local" keep |
| 606 | * the additional specific data. |
| 607 | * Note that some of this specific data is in fact generic (en_stats, for |
| 608 | * example). |
| 609 | */ |
| 610 | struct net_local |
| 611 | { |
| 612 | dev_node_t node; /* ???? What is this stuff ???? */ |
| 613 | struct net_device * dev; /* Reverse link... */ |
| 614 | spinlock_t spinlock; /* Serialize access to the hardware (SMP) */ |
| 615 | dev_link_t * link; /* pcmcia structure */ |
| 616 | en_stats stats; /* Ethernet interface statistics */ |
| 617 | int nresets; /* Number of hw resets */ |
| 618 | u_char configured; /* If it is configured */ |
| 619 | u_char reconfig_82593; /* Need to reconfigure the controller */ |
| 620 | u_char promiscuous; /* Promiscuous mode */ |
| 621 | u_char allmulticast; /* All Multicast mode */ |
| 622 | int mc_count; /* Number of multicast addresses */ |
| 623 | |
| 624 | int stop; /* Current i82593 Stop Hit Register */ |
| 625 | int rfp; /* Last DMA machine receive pointer */ |
| 626 | int overrunning; /* Receiver overrun flag */ |
| 627 | |
| 628 | #ifdef WIRELESS_EXT |
| 629 | iw_stats wstats; /* Wireless specific stats */ |
| 630 | |
| 631 | struct iw_spy_data spy_data; |
| 632 | struct iw_public_data wireless_data; |
| 633 | #endif |
| 634 | |
| 635 | #ifdef HISTOGRAM |
| 636 | int his_number; /* Number of intervals */ |
| 637 | u_char his_range[16]; /* Boundaries of interval ]n-1; n] */ |
| 638 | u_long his_sum[16]; /* Sum in interval */ |
| 639 | #endif /* HISTOGRAM */ |
| 640 | #ifdef WAVELAN_ROAMING |
| 641 | u_long domain_id; /* Domain ID we lock on for roaming */ |
| 642 | int filter_domains; /* Check Domain ID of beacon found */ |
| 643 | struct wavepoint_table wavepoint_table; /* Table of visible WavePoints*/ |
| 644 | wavepoint_history * curr_point; /* Current wavepoint */ |
| 645 | int cell_search; /* Searching for new cell? */ |
| 646 | struct timer_list cell_timer; /* Garbage collection */ |
| 647 | #endif /* WAVELAN_ROAMING */ |
| 648 | void __iomem *mem; |
| 649 | }; |
| 650 | |
| 651 | /**************************** PROTOTYPES ****************************/ |
| 652 | |
| 653 | #ifdef WAVELAN_ROAMING |
| 654 | /* ---------------------- ROAMING SUBROUTINES -----------------------*/ |
| 655 | |
| 656 | wavepoint_history *wl_roam_check(unsigned short nwid, net_local *lp); |
| 657 | wavepoint_history *wl_new_wavepoint(unsigned short nwid, unsigned char seq, net_local *lp); |
| 658 | void wl_del_wavepoint(wavepoint_history *wavepoint, net_local *lp); |
| 659 | void wl_cell_expiry(unsigned long data); |
| 660 | wavepoint_history *wl_best_sigqual(int fast_search, net_local *lp); |
| 661 | void wl_update_history(wavepoint_history *wavepoint, unsigned char sigqual, unsigned char seq); |
| 662 | void wv_roam_handover(wavepoint_history *wavepoint, net_local *lp); |
| 663 | void wv_nwid_filter(unsigned char mode, net_local *lp); |
| 664 | void wv_roam_init(struct net_device *dev); |
| 665 | void wv_roam_cleanup(struct net_device *dev); |
| 666 | #endif /* WAVELAN_ROAMING */ |
| 667 | |
| 668 | /* ----------------- MODEM MANAGEMENT SUBROUTINES ----------------- */ |
| 669 | static inline u_char /* data */ |
| 670 | hasr_read(u_long); /* Read the host interface : base address */ |
| 671 | static inline void |
| 672 | hacr_write(u_long, /* Write to host interface : base address */ |
| 673 | u_char), /* data */ |
| 674 | hacr_write_slow(u_long, |
| 675 | u_char); |
| 676 | static void |
| 677 | psa_read(struct net_device *, /* Read the Parameter Storage Area */ |
| 678 | int, /* offset in PSA */ |
| 679 | u_char *, /* buffer to fill */ |
| 680 | int), /* size to read */ |
| 681 | psa_write(struct net_device *, /* Write to the PSA */ |
| 682 | int, /* Offset in psa */ |
| 683 | u_char *, /* Buffer in memory */ |
| 684 | int); /* Length of buffer */ |
| 685 | static inline void |
| 686 | mmc_out(u_long, /* Write 1 byte to the Modem Manag Control */ |
| 687 | u_short, |
| 688 | u_char), |
| 689 | mmc_write(u_long, /* Write n bytes to the MMC */ |
| 690 | u_char, |
| 691 | u_char *, |
| 692 | int); |
| 693 | static inline u_char /* Read 1 byte from the MMC */ |
| 694 | mmc_in(u_long, |
| 695 | u_short); |
| 696 | static inline void |
| 697 | mmc_read(u_long, /* Read n bytes from the MMC */ |
| 698 | u_char, |
| 699 | u_char *, |
| 700 | int), |
| 701 | fee_wait(u_long, /* Wait for frequency EEprom : base address */ |
| 702 | int, /* Base delay to wait for */ |
| 703 | int); /* Number of time to wait */ |
| 704 | static void |
| 705 | fee_read(u_long, /* Read the frequency EEprom : base address */ |
| 706 | u_short, /* destination offset */ |
| 707 | u_short *, /* data buffer */ |
| 708 | int); /* number of registers */ |
| 709 | /* ---------------------- I82593 SUBROUTINES ----------------------- */ |
| 710 | static int |
| 711 | wv_82593_cmd(struct net_device *, /* synchronously send a command to i82593 */ |
| 712 | char *, |
| 713 | int, |
| 714 | int); |
| 715 | static inline int |
| 716 | wv_diag(struct net_device *); /* Diagnostique the i82593 */ |
| 717 | static int |
| 718 | read_ringbuf(struct net_device *, /* Read a receive buffer */ |
| 719 | int, |
| 720 | char *, |
| 721 | int); |
| 722 | static inline void |
| 723 | wv_82593_reconfig(struct net_device *); /* Reconfigure the controller */ |
| 724 | /* ------------------- DEBUG & INFO SUBROUTINES ------------------- */ |
| 725 | static inline void |
| 726 | wv_init_info(struct net_device *); /* display startup info */ |
| 727 | /* ------------------- IOCTL, STATS & RECONFIG ------------------- */ |
| 728 | static en_stats * |
| 729 | wavelan_get_stats(struct net_device *); /* Give stats /proc/net/dev */ |
| 730 | static iw_stats * |
| 731 | wavelan_get_wireless_stats(struct net_device *); |
| 732 | /* ----------------------- PACKET RECEPTION ----------------------- */ |
| 733 | static inline int |
| 734 | wv_start_of_frame(struct net_device *, /* Seek beggining of current frame */ |
| 735 | int, /* end of frame */ |
| 736 | int); /* start of buffer */ |
| 737 | static inline void |
| 738 | wv_packet_read(struct net_device *, /* Read a packet from a frame */ |
| 739 | int, |
| 740 | int), |
| 741 | wv_packet_rcv(struct net_device *); /* Read all packets waiting */ |
| 742 | /* --------------------- PACKET TRANSMISSION --------------------- */ |
| 743 | static inline void |
| 744 | wv_packet_write(struct net_device *, /* Write a packet to the Tx buffer */ |
| 745 | void *, |
| 746 | short); |
| 747 | static int |
| 748 | wavelan_packet_xmit(struct sk_buff *, /* Send a packet */ |
| 749 | struct net_device *); |
| 750 | /* -------------------- HARDWARE CONFIGURATION -------------------- */ |
| 751 | static inline int |
| 752 | wv_mmc_init(struct net_device *); /* Initialize the modem */ |
| 753 | static int |
| 754 | wv_ru_stop(struct net_device *), /* Stop the i82593 receiver unit */ |
| 755 | wv_ru_start(struct net_device *); /* Start the i82593 receiver unit */ |
| 756 | static int |
| 757 | wv_82593_config(struct net_device *); /* Configure the i82593 */ |
| 758 | static inline int |
| 759 | wv_pcmcia_reset(struct net_device *); /* Reset the pcmcia interface */ |
| 760 | static int |
| 761 | wv_hw_config(struct net_device *); /* Reset & configure the whole hardware */ |
| 762 | static inline void |
| 763 | wv_hw_reset(struct net_device *); /* Same, + start receiver unit */ |
| 764 | static inline int |
| 765 | wv_pcmcia_config(dev_link_t *); /* Configure the pcmcia interface */ |
| 766 | static void |
| 767 | wv_pcmcia_release(dev_link_t *);/* Remove a device */ |
| 768 | /* ---------------------- INTERRUPT HANDLING ---------------------- */ |
| 769 | static irqreturn_t |
| 770 | wavelan_interrupt(int, /* Interrupt handler */ |
| 771 | void *, |
| 772 | struct pt_regs *); |
| 773 | static void |
| 774 | wavelan_watchdog(struct net_device *); /* Transmission watchdog */ |
| 775 | /* ------------------- CONFIGURATION CALLBACKS ------------------- */ |
| 776 | static int |
| 777 | wavelan_open(struct net_device *), /* Open the device */ |
| 778 | wavelan_close(struct net_device *); /* Close the device */ |
| 779 | static dev_link_t * |
| 780 | wavelan_attach(void); /* Create a new device */ |
| 781 | static void |
| 782 | wavelan_detach(dev_link_t *); /* Destroy a removed device */ |
| 783 | static int |
| 784 | wavelan_event(event_t, /* Manage pcmcia events */ |
| 785 | int, |
| 786 | event_callback_args_t *); |
| 787 | |
| 788 | /**************************** VARIABLES ****************************/ |
| 789 | |
| 790 | static dev_info_t dev_info = "wavelan_cs"; |
| 791 | static dev_link_t *dev_list = NULL; /* Linked list of devices */ |
| 792 | |
| 793 | /* |
| 794 | * Parameters that can be set with 'insmod' |
| 795 | * The exact syntax is 'insmod wavelan_cs.o <var>=<value>' |
| 796 | */ |
| 797 | |
| 798 | /* Shared memory speed, in ns */ |
| 799 | static int mem_speed = 0; |
| 800 | |
| 801 | /* New module interface */ |
| 802 | module_param(mem_speed, int, 0); |
| 803 | |
| 804 | #ifdef WAVELAN_ROAMING /* Conditional compile, see above in options */ |
| 805 | /* Enable roaming mode ? No ! Please keep this to 0 */ |
| 806 | static int do_roaming = 0; |
| 807 | module_param(do_roaming, bool, 0); |
| 808 | #endif /* WAVELAN_ROAMING */ |
| 809 | |
| 810 | MODULE_LICENSE("GPL"); |
| 811 | |
| 812 | #endif /* WAVELAN_CS_P_H */ |
| 813 | |