blob: 919c6d56fd7ce7cc1e65a477634eb2efccbcd9c6 [file] [log] [blame]
Abhimanyu Kapur2a74a922013-01-21 17:13:52 -08001/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
2 *
3 * This program is free software; you can redistribute it and/or modify
4 * it under the terms of the GNU General Public License version 2 and
5 * only version 2 as published by the Free Software Foundation.
6 *
7 * This program is distributed in the hope that it will be useful,
8 * but WITHOUT ANY WARRANTY; without even the implied warranty of
9 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
10 * GNU General Public License for more details.
11 */
12
13/dts-v1/;
14
15/include/ "msm9625-v2.dtsi"
Ken Zhange529ff12013-01-24 17:02:35 -050016/include/ "msm9625-display.dtsi"
17/include/ "qpic-panel-ili-qvga.dtsi"
Abhimanyu Kapur2a74a922013-01-21 17:13:52 -080018
19/ {
20 model = "Qualcomm MSM 9625V2 CDP";
21 compatible = "qcom,msm9625-cdp", "qcom,msm9625";
22 qcom,msm-id = <134 1 0x20000>, <152 1 0x20000>, <149 1 0x20000>,
Abhimanyu Kapur430add82013-01-28 13:51:01 -080023 <150 1 0x20000>, <151 1 0x20000>, <148 1 0x20000>,
24 <173 1 0x20000>, <174 1 0x20000>, <175 1 0x20000>;
Abhimanyu Kapur2a74a922013-01-21 17:13:52 -080025
26 i2c@f9925000 {
27 charger@57 {
28 compatible = "summit,smb137c";
29 reg = <0x57>;
30 summit,chg-current-ma = <1500>;
31 summit,term-current-ma = <50>;
32 summit,pre-chg-current-ma = <100>;
33 summit,float-voltage-mv = <4200>;
34 summit,thresh-voltage-mv = <3000>;
35 summit,recharge-thresh-mv = <75>;
36 summit,system-voltage-mv = <4250>;
37 summit,charging-timeout = <382>;
38 summit,pre-charge-timeout = <48>;
39 summit,therm-current-ua = <10>;
40 summit,temperature-min = <4>; /* 0 C */
41 summit,temperature-max = <3>; /* 45 C */
42 };
43 };
44
45 wlan0: qca,wlan {
46 cell-index = <0>;
Smita Ghosh08dacab2013-03-14 16:16:14 -070047 compatible = "qca,ar6004-hsic";
Abhimanyu Kapur2a74a922013-01-21 17:13:52 -080048 qca,chip-pwd-l-gpios = <&msmgpio 62 0>;
49 qca,pm-enable-gpios = <&pm8019_gpios 3 0x0>;
50 qca,ar6004-vdd-io-supply = <&pm8019_l11>;
51 };
52};
53
54/* PM8019 GPIO and MPP configuration */
55&pm8019_gpios {
56 gpio@c000 { /* GPIO 1 */
57 };
58
59 gpio@c100 { /* GPIO 2 */
60 };
61
62 gpio@c200 { /* GPIO 3 */
63 };
64
65 gpio@c300 { /* GPIO 4 */
66 /* ext_2p95v regulator enable config */
67 qcom,mode = <1>; /* Digital output */
68 qcom,output-type = <0>; /* CMOS */
69 qcom,invert = <0>; /* Output low */
70 qcom,out-strength = <1>; /* Low */
71 qcom,vin-sel = <2>; /* PM8019 L11 - 1.8V */
72 qcom,src-sel = <0>; /* Constant */
73 qcom,master-en = <1>; /* Enable GPIO */
74 };
75
76 gpio@c400 { /* GPIO 5 */
77 };
78
79 gpio@c500 { /* GPIO 6 */
80 };
81};
82
83&pm8019_mpps {
84 mpp@a000 { /* MPP 1 */
85 };
86
87 mpp@a100 { /* MPP 2 */
88 };
89
90 mpp@a200 { /* MPP 3 */
91 };
92
93 mpp@a300 { /* MPP 4 */
94 };
95
96 mpp@a400 { /* MPP 5 */
97 };
98
99 mpp@a500 { /* MPP 6 */
100 };
101};