Peter Korsgaard | e9b29ff | 2008-04-27 08:59:45 +0200 | [diff] [blame] | 1 | /* |
| 2 | * c67x00-sched.c: Cypress C67X00 USB Host Controller Driver - TD scheduling |
| 3 | * |
| 4 | * Copyright (C) 2006-2008 Barco N.V. |
| 5 | * Derived from the Cypress cy7c67200/300 ezusb linux driver and |
| 6 | * based on multiple host controller drivers inside the linux kernel. |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or modify |
| 9 | * it under the terms of the GNU General Public License as published by |
| 10 | * the Free Software Foundation; either version 2 of the License, or |
| 11 | * (at your option) any later version. |
| 12 | * |
| 13 | * This program is distributed in the hope that it will be useful, |
| 14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 16 | * GNU General Public License for more details. |
| 17 | * |
| 18 | * You should have received a copy of the GNU General Public License |
| 19 | * along with this program; if not, write to the Free Software |
| 20 | * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, |
| 21 | * MA 02110-1301 USA. |
| 22 | */ |
| 23 | |
| 24 | #include <linux/kthread.h> |
| 25 | |
| 26 | #include "c67x00.h" |
| 27 | #include "c67x00-hcd.h" |
| 28 | |
| 29 | /* |
| 30 | * These are the stages for a control urb, they are kept |
| 31 | * in both urb->interval and td->privdata. |
| 32 | */ |
| 33 | #define SETUP_STAGE 0 |
| 34 | #define DATA_STAGE 1 |
| 35 | #define STATUS_STAGE 2 |
| 36 | |
| 37 | /* -------------------------------------------------------------------------- */ |
| 38 | |
| 39 | /** |
| 40 | * struct c67x00_ep_data: Host endpoint data structure |
| 41 | */ |
| 42 | struct c67x00_ep_data { |
| 43 | struct list_head queue; |
| 44 | struct list_head node; |
| 45 | struct usb_host_endpoint *hep; |
| 46 | struct usb_device *dev; |
| 47 | u16 next_frame; /* For int/isoc transactions */ |
| 48 | }; |
| 49 | |
| 50 | /** |
| 51 | * struct c67x00_td |
| 52 | * |
| 53 | * Hardware parts are little endiannes, SW in CPU endianess. |
| 54 | */ |
| 55 | struct c67x00_td { |
| 56 | /* HW specific part */ |
| 57 | __le16 ly_base_addr; /* Bytes 0-1 */ |
| 58 | __le16 port_length; /* Bytes 2-3 */ |
| 59 | u8 pid_ep; /* Byte 4 */ |
| 60 | u8 dev_addr; /* Byte 5 */ |
| 61 | u8 ctrl_reg; /* Byte 6 */ |
| 62 | u8 status; /* Byte 7 */ |
| 63 | u8 retry_cnt; /* Byte 8 */ |
| 64 | #define TT_OFFSET 2 |
| 65 | #define TT_CONTROL 0 |
| 66 | #define TT_ISOCHRONOUS 1 |
| 67 | #define TT_BULK 2 |
| 68 | #define TT_INTERRUPT 3 |
| 69 | u8 residue; /* Byte 9 */ |
| 70 | __le16 next_td_addr; /* Bytes 10-11 */ |
| 71 | /* SW part */ |
| 72 | struct list_head td_list; |
| 73 | u16 td_addr; |
| 74 | void *data; |
| 75 | struct urb *urb; |
| 76 | unsigned long privdata; |
| 77 | |
| 78 | /* These are needed for handling the toggle bits: |
| 79 | * an urb can be dequeued while a td is in progress |
| 80 | * after checking the td, the toggle bit might need to |
| 81 | * be fixed */ |
| 82 | struct c67x00_ep_data *ep_data; |
| 83 | unsigned int pipe; |
| 84 | }; |
| 85 | |
| 86 | struct c67x00_urb_priv { |
| 87 | struct list_head hep_node; |
| 88 | struct urb *urb; |
| 89 | int port; |
| 90 | int cnt; /* packet number for isoc */ |
| 91 | int status; |
| 92 | struct c67x00_ep_data *ep_data; |
| 93 | }; |
| 94 | |
| 95 | #define td_udev(td) ((td)->ep_data->dev) |
| 96 | |
| 97 | #define CY_TD_SIZE 12 |
| 98 | |
| 99 | #define TD_PIDEP_OFFSET 0x04 |
| 100 | #define TD_PIDEPMASK_PID 0xF0 |
| 101 | #define TD_PIDEPMASK_EP 0x0F |
| 102 | #define TD_PORTLENMASK_DL 0x02FF |
| 103 | #define TD_PORTLENMASK_PN 0xC000 |
| 104 | |
| 105 | #define TD_STATUS_OFFSET 0x07 |
| 106 | #define TD_STATUSMASK_ACK 0x01 |
| 107 | #define TD_STATUSMASK_ERR 0x02 |
| 108 | #define TD_STATUSMASK_TMOUT 0x04 |
| 109 | #define TD_STATUSMASK_SEQ 0x08 |
| 110 | #define TD_STATUSMASK_SETUP 0x10 |
| 111 | #define TD_STATUSMASK_OVF 0x20 |
| 112 | #define TD_STATUSMASK_NAK 0x40 |
| 113 | #define TD_STATUSMASK_STALL 0x80 |
| 114 | |
| 115 | #define TD_ERROR_MASK (TD_STATUSMASK_ERR | TD_STATUSMASK_TMOUT | \ |
| 116 | TD_STATUSMASK_STALL) |
| 117 | |
| 118 | #define TD_RETRYCNT_OFFSET 0x08 |
| 119 | #define TD_RETRYCNTMASK_ACT_FLG 0x10 |
| 120 | #define TD_RETRYCNTMASK_TX_TYPE 0x0C |
| 121 | #define TD_RETRYCNTMASK_RTY_CNT 0x03 |
| 122 | |
| 123 | #define TD_RESIDUE_OVERFLOW 0x80 |
| 124 | |
| 125 | #define TD_PID_IN 0x90 |
| 126 | |
| 127 | /* Residue: signed 8bits, neg -> OVERFLOW, pos -> UNDERFLOW */ |
| 128 | #define td_residue(td) ((__s8)(td->residue)) |
| 129 | #define td_ly_base_addr(td) (__le16_to_cpu((td)->ly_base_addr)) |
| 130 | #define td_port_length(td) (__le16_to_cpu((td)->port_length)) |
| 131 | #define td_next_td_addr(td) (__le16_to_cpu((td)->next_td_addr)) |
| 132 | |
| 133 | #define td_active(td) ((td)->retry_cnt & TD_RETRYCNTMASK_ACT_FLG) |
| 134 | #define td_length(td) (td_port_length(td) & TD_PORTLENMASK_DL) |
| 135 | |
| 136 | #define td_sequence_ok(td) (!td->status || \ |
| 137 | (!(td->status & TD_STATUSMASK_SEQ) == \ |
| 138 | !(td->ctrl_reg & SEQ_SEL))) |
| 139 | |
| 140 | #define td_acked(td) (!td->status || \ |
| 141 | (td->status & TD_STATUSMASK_ACK)) |
| 142 | #define td_actual_bytes(td) (td_length(td) - td_residue(td)) |
| 143 | |
| 144 | /* -------------------------------------------------------------------------- */ |
| 145 | |
| 146 | #ifdef DEBUG |
| 147 | |
| 148 | /** |
| 149 | * dbg_td - Dump the contents of the TD |
| 150 | */ |
| 151 | static void dbg_td(struct c67x00_hcd *c67x00, struct c67x00_td *td, char *msg) |
| 152 | { |
| 153 | struct device *dev = c67x00_hcd_dev(c67x00); |
| 154 | |
| 155 | dev_dbg(dev, "### %s at 0x%04x\n", msg, td->td_addr); |
| 156 | dev_dbg(dev, "urb: 0x%p\n", td->urb); |
| 157 | dev_dbg(dev, "endpoint: %4d\n", usb_pipeendpoint(td->pipe)); |
| 158 | dev_dbg(dev, "pipeout: %4d\n", usb_pipeout(td->pipe)); |
| 159 | dev_dbg(dev, "ly_base_addr: 0x%04x\n", td_ly_base_addr(td)); |
| 160 | dev_dbg(dev, "port_length: 0x%04x\n", td_port_length(td)); |
| 161 | dev_dbg(dev, "pid_ep: 0x%02x\n", td->pid_ep); |
| 162 | dev_dbg(dev, "dev_addr: 0x%02x\n", td->dev_addr); |
| 163 | dev_dbg(dev, "ctrl_reg: 0x%02x\n", td->ctrl_reg); |
| 164 | dev_dbg(dev, "status: 0x%02x\n", td->status); |
| 165 | dev_dbg(dev, "retry_cnt: 0x%02x\n", td->retry_cnt); |
| 166 | dev_dbg(dev, "residue: 0x%02x\n", td->residue); |
| 167 | dev_dbg(dev, "next_td_addr: 0x%04x\n", td_next_td_addr(td)); |
| 168 | dev_dbg(dev, "data:"); |
| 169 | print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 16, 1, |
| 170 | td->data, td_length(td), 1); |
| 171 | } |
| 172 | #else /* DEBUG */ |
| 173 | |
| 174 | static inline void |
| 175 | dbg_td(struct c67x00_hcd *c67x00, struct c67x00_td *td, char *msg) { } |
| 176 | |
| 177 | #endif /* DEBUG */ |
| 178 | |
| 179 | /* -------------------------------------------------------------------------- */ |
| 180 | /* Helper functions */ |
| 181 | |
| 182 | static inline u16 c67x00_get_current_frame_number(struct c67x00_hcd *c67x00) |
| 183 | { |
| 184 | return c67x00_ll_husb_get_frame(c67x00->sie) & HOST_FRAME_MASK; |
| 185 | } |
| 186 | |
| 187 | /** |
| 188 | * frame_add |
| 189 | * Software wraparound for framenumbers. |
| 190 | */ |
| 191 | static inline u16 frame_add(u16 a, u16 b) |
| 192 | { |
| 193 | return (a + b) & HOST_FRAME_MASK; |
| 194 | } |
| 195 | |
| 196 | /** |
| 197 | * frame_after - is frame a after frame b |
| 198 | */ |
| 199 | static inline int frame_after(u16 a, u16 b) |
| 200 | { |
| 201 | return ((HOST_FRAME_MASK + a - b) & HOST_FRAME_MASK) < |
| 202 | (HOST_FRAME_MASK / 2); |
| 203 | } |
| 204 | |
| 205 | /** |
| 206 | * frame_after_eq - is frame a after or equal to frame b |
| 207 | */ |
| 208 | static inline int frame_after_eq(u16 a, u16 b) |
| 209 | { |
| 210 | return ((HOST_FRAME_MASK + 1 + a - b) & HOST_FRAME_MASK) < |
| 211 | (HOST_FRAME_MASK / 2); |
| 212 | } |
| 213 | |
| 214 | /* -------------------------------------------------------------------------- */ |
| 215 | |
| 216 | /** |
| 217 | * c67x00_release_urb - remove link from all tds to this urb |
| 218 | * Disconnects the urb from it's tds, so that it can be given back. |
| 219 | * pre: urb->hcpriv != NULL |
| 220 | */ |
| 221 | static void c67x00_release_urb(struct c67x00_hcd *c67x00, struct urb *urb) |
| 222 | { |
| 223 | struct c67x00_td *td; |
| 224 | struct c67x00_urb_priv *urbp; |
| 225 | |
| 226 | BUG_ON(!urb); |
| 227 | |
| 228 | c67x00->urb_count--; |
| 229 | |
| 230 | if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { |
| 231 | c67x00->urb_iso_count--; |
| 232 | if (c67x00->urb_iso_count == 0) |
| 233 | c67x00->max_frame_bw = MAX_FRAME_BW_STD; |
| 234 | } |
| 235 | |
| 236 | /* TODO this might be not so efficient when we've got many urbs! |
| 237 | * Alternatives: |
| 238 | * * only clear when needed |
| 239 | * * keep a list of tds with each urbp |
| 240 | */ |
| 241 | list_for_each_entry(td, &c67x00->td_list, td_list) |
| 242 | if (urb == td->urb) |
| 243 | td->urb = NULL; |
| 244 | |
| 245 | urbp = urb->hcpriv; |
| 246 | urb->hcpriv = NULL; |
| 247 | list_del(&urbp->hep_node); |
| 248 | kfree(urbp); |
| 249 | } |
| 250 | |
| 251 | /* -------------------------------------------------------------------------- */ |
| 252 | |
| 253 | static struct c67x00_ep_data * |
| 254 | c67x00_ep_data_alloc(struct c67x00_hcd *c67x00, struct urb *urb) |
| 255 | { |
| 256 | struct usb_host_endpoint *hep = urb->ep; |
| 257 | struct c67x00_ep_data *ep_data; |
| 258 | int type; |
| 259 | |
| 260 | c67x00->current_frame = c67x00_get_current_frame_number(c67x00); |
| 261 | |
| 262 | /* Check if endpoint already has a c67x00_ep_data struct allocated */ |
| 263 | if (hep->hcpriv) { |
| 264 | ep_data = hep->hcpriv; |
| 265 | if (frame_after(c67x00->current_frame, ep_data->next_frame)) |
| 266 | ep_data->next_frame = |
| 267 | frame_add(c67x00->current_frame, 1); |
| 268 | return hep->hcpriv; |
| 269 | } |
| 270 | |
| 271 | /* Allocate and initialize a new c67x00 endpoint data structure */ |
| 272 | ep_data = kzalloc(sizeof(*ep_data), GFP_ATOMIC); |
| 273 | if (!ep_data) |
| 274 | return NULL; |
| 275 | |
| 276 | INIT_LIST_HEAD(&ep_data->queue); |
| 277 | INIT_LIST_HEAD(&ep_data->node); |
| 278 | ep_data->hep = hep; |
| 279 | |
| 280 | /* hold a reference to udev as long as this endpoint lives, |
| 281 | * this is needed to possibly fix the data toggle */ |
| 282 | ep_data->dev = usb_get_dev(urb->dev); |
| 283 | hep->hcpriv = ep_data; |
| 284 | |
| 285 | /* For ISOC and INT endpoints, start ASAP: */ |
| 286 | ep_data->next_frame = frame_add(c67x00->current_frame, 1); |
| 287 | |
| 288 | /* Add the endpoint data to one of the pipe lists; must be added |
| 289 | in order of endpoint address */ |
| 290 | type = usb_pipetype(urb->pipe); |
| 291 | if (list_empty(&ep_data->node)) { |
| 292 | list_add(&ep_data->node, &c67x00->list[type]); |
| 293 | } else { |
| 294 | struct c67x00_ep_data *prev; |
| 295 | |
| 296 | list_for_each_entry(prev, &c67x00->list[type], node) { |
| 297 | if (prev->hep->desc.bEndpointAddress > |
| 298 | hep->desc.bEndpointAddress) { |
| 299 | list_add(&ep_data->node, prev->node.prev); |
| 300 | break; |
| 301 | } |
| 302 | } |
| 303 | } |
| 304 | |
| 305 | return ep_data; |
| 306 | } |
| 307 | |
| 308 | static int c67x00_ep_data_free(struct usb_host_endpoint *hep) |
| 309 | { |
| 310 | struct c67x00_ep_data *ep_data = hep->hcpriv; |
| 311 | |
| 312 | if (!ep_data) |
| 313 | return 0; |
| 314 | |
| 315 | if (!list_empty(&ep_data->queue)) |
| 316 | return -EBUSY; |
| 317 | |
| 318 | usb_put_dev(ep_data->dev); |
| 319 | list_del(&ep_data->queue); |
| 320 | list_del(&ep_data->node); |
| 321 | |
| 322 | kfree(ep_data); |
| 323 | hep->hcpriv = NULL; |
| 324 | |
| 325 | return 0; |
| 326 | } |
| 327 | |
| 328 | void c67x00_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep) |
| 329 | { |
| 330 | struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd); |
| 331 | unsigned long flags; |
| 332 | |
| 333 | if (!list_empty(&ep->urb_list)) |
| 334 | dev_warn(c67x00_hcd_dev(c67x00), "error: urb list not empty\n"); |
| 335 | |
| 336 | spin_lock_irqsave(&c67x00->lock, flags); |
| 337 | |
| 338 | /* loop waiting for all transfers in the endpoint queue to complete */ |
| 339 | while (c67x00_ep_data_free(ep)) { |
| 340 | /* Drop the lock so we can sleep waiting for the hardware */ |
| 341 | spin_unlock_irqrestore(&c67x00->lock, flags); |
| 342 | |
| 343 | /* it could happen that we reinitialize this completion, while |
| 344 | * somebody was waiting for that completion. The timeout and |
| 345 | * while loop handle such cases, but this might be improved */ |
| 346 | INIT_COMPLETION(c67x00->endpoint_disable); |
| 347 | c67x00_sched_kick(c67x00); |
| 348 | wait_for_completion_timeout(&c67x00->endpoint_disable, 1 * HZ); |
| 349 | |
| 350 | spin_lock_irqsave(&c67x00->lock, flags); |
| 351 | } |
| 352 | |
| 353 | spin_unlock_irqrestore(&c67x00->lock, flags); |
| 354 | } |
| 355 | |
| 356 | /* -------------------------------------------------------------------------- */ |
| 357 | |
| 358 | static inline int get_root_port(struct usb_device *dev) |
| 359 | { |
| 360 | while (dev->parent->parent) |
| 361 | dev = dev->parent; |
| 362 | return dev->portnum; |
| 363 | } |
| 364 | |
| 365 | int c67x00_urb_enqueue(struct usb_hcd *hcd, |
| 366 | struct urb *urb, gfp_t mem_flags) |
| 367 | { |
| 368 | int ret; |
| 369 | unsigned long flags; |
| 370 | struct c67x00_urb_priv *urbp; |
| 371 | struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd); |
| 372 | int port = get_root_port(urb->dev)-1; |
| 373 | |
| 374 | spin_lock_irqsave(&c67x00->lock, flags); |
| 375 | |
| 376 | /* Make sure host controller is running */ |
| 377 | if (!HC_IS_RUNNING(hcd->state)) { |
| 378 | ret = -ENODEV; |
| 379 | goto err_not_linked; |
| 380 | } |
| 381 | |
| 382 | ret = usb_hcd_link_urb_to_ep(hcd, urb); |
| 383 | if (ret) |
| 384 | goto err_not_linked; |
| 385 | |
| 386 | /* Allocate and initialize urb private data */ |
| 387 | urbp = kzalloc(sizeof(*urbp), mem_flags); |
| 388 | if (!urbp) { |
| 389 | ret = -ENOMEM; |
| 390 | goto err_urbp; |
| 391 | } |
| 392 | |
| 393 | INIT_LIST_HEAD(&urbp->hep_node); |
| 394 | urbp->urb = urb; |
| 395 | urbp->port = port; |
| 396 | |
| 397 | urbp->ep_data = c67x00_ep_data_alloc(c67x00, urb); |
| 398 | |
| 399 | if (!urbp->ep_data) { |
| 400 | ret = -ENOMEM; |
| 401 | goto err_epdata; |
| 402 | } |
| 403 | |
| 404 | /* TODO claim bandwidth with usb_claim_bandwidth? |
| 405 | * also release it somewhere! */ |
| 406 | |
| 407 | urb->hcpriv = urbp; |
| 408 | |
| 409 | urb->actual_length = 0; /* Nothing received/transmitted yet */ |
| 410 | |
| 411 | switch (usb_pipetype(urb->pipe)) { |
| 412 | case PIPE_CONTROL: |
| 413 | urb->interval = SETUP_STAGE; |
| 414 | break; |
| 415 | case PIPE_INTERRUPT: |
| 416 | break; |
| 417 | case PIPE_BULK: |
| 418 | break; |
| 419 | case PIPE_ISOCHRONOUS: |
| 420 | if (c67x00->urb_iso_count == 0) |
| 421 | c67x00->max_frame_bw = MAX_FRAME_BW_ISO; |
| 422 | c67x00->urb_iso_count++; |
| 423 | /* Assume always URB_ISO_ASAP, FIXME */ |
| 424 | if (list_empty(&urbp->ep_data->queue)) |
| 425 | urb->start_frame = urbp->ep_data->next_frame; |
| 426 | else { |
| 427 | /* Go right after the last one */ |
| 428 | struct urb *last_urb; |
| 429 | |
| 430 | last_urb = list_entry(urbp->ep_data->queue.prev, |
| 431 | struct c67x00_urb_priv, |
| 432 | hep_node)->urb; |
| 433 | urb->start_frame = |
| 434 | frame_add(last_urb->start_frame, |
| 435 | last_urb->number_of_packets * |
| 436 | last_urb->interval); |
| 437 | } |
| 438 | urbp->cnt = 0; |
| 439 | break; |
| 440 | } |
| 441 | |
| 442 | /* Add the URB to the endpoint queue */ |
| 443 | list_add_tail(&urbp->hep_node, &urbp->ep_data->queue); |
| 444 | |
| 445 | /* If this is the only URB, kick start the controller */ |
| 446 | if (!c67x00->urb_count++) |
| 447 | c67x00_ll_hpi_enable_sofeop(c67x00->sie); |
| 448 | |
| 449 | c67x00_sched_kick(c67x00); |
| 450 | spin_unlock_irqrestore(&c67x00->lock, flags); |
| 451 | |
| 452 | return 0; |
| 453 | |
| 454 | err_epdata: |
| 455 | kfree(urbp); |
| 456 | err_urbp: |
| 457 | usb_hcd_unlink_urb_from_ep(hcd, urb); |
| 458 | err_not_linked: |
| 459 | spin_unlock_irqrestore(&c67x00->lock, flags); |
| 460 | |
| 461 | return ret; |
| 462 | } |
| 463 | |
| 464 | int c67x00_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) |
| 465 | { |
| 466 | struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd); |
| 467 | unsigned long flags; |
| 468 | int rc; |
| 469 | |
| 470 | spin_lock_irqsave(&c67x00->lock, flags); |
| 471 | rc = usb_hcd_check_unlink_urb(hcd, urb, status); |
| 472 | if (rc) |
| 473 | goto done; |
| 474 | |
| 475 | c67x00_release_urb(c67x00, urb); |
| 476 | usb_hcd_unlink_urb_from_ep(hcd, urb); |
| 477 | |
| 478 | spin_unlock(&c67x00->lock); |
| 479 | usb_hcd_giveback_urb(hcd, urb, status); |
| 480 | spin_lock(&c67x00->lock); |
| 481 | |
| 482 | spin_unlock_irqrestore(&c67x00->lock, flags); |
| 483 | |
| 484 | return 0; |
| 485 | |
| 486 | done: |
| 487 | spin_unlock_irqrestore(&c67x00->lock, flags); |
| 488 | return rc; |
| 489 | } |
| 490 | |
| 491 | /* -------------------------------------------------------------------------- */ |
| 492 | |
| 493 | /* |
| 494 | * pre: c67x00 locked, urb unlocked |
| 495 | */ |
| 496 | static void |
| 497 | c67x00_giveback_urb(struct c67x00_hcd *c67x00, struct urb *urb, int status) |
| 498 | { |
| 499 | struct c67x00_urb_priv *urbp; |
| 500 | |
| 501 | if (!urb) |
| 502 | return; |
| 503 | |
| 504 | urbp = urb->hcpriv; |
| 505 | urbp->status = status; |
| 506 | |
| 507 | list_del_init(&urbp->hep_node); |
| 508 | |
| 509 | c67x00_release_urb(c67x00, urb); |
| 510 | usb_hcd_unlink_urb_from_ep(c67x00_hcd_to_hcd(c67x00), urb); |
| 511 | spin_unlock(&c67x00->lock); |
| 512 | usb_hcd_giveback_urb(c67x00_hcd_to_hcd(c67x00), urb, urbp->status); |
| 513 | spin_lock(&c67x00->lock); |
| 514 | } |
| 515 | |
| 516 | /* -------------------------------------------------------------------------- */ |
| 517 | |
| 518 | static int c67x00_claim_frame_bw(struct c67x00_hcd *c67x00, struct urb *urb, |
| 519 | int len, int periodic) |
| 520 | { |
| 521 | struct c67x00_urb_priv *urbp = urb->hcpriv; |
| 522 | int bit_time; |
| 523 | |
| 524 | /* According to the C67x00 BIOS user manual, page 3-18,19, the |
| 525 | * following calculations provide the full speed bit times for |
| 526 | * a transaction. |
| 527 | * |
| 528 | * FS(in) = 112.5 + 9.36*BC + HOST_DELAY |
| 529 | * FS(in,iso) = 90.5 + 9.36*BC + HOST_DELAY |
| 530 | * FS(out) = 112.5 + 9.36*BC + HOST_DELAY |
| 531 | * FS(out,iso) = 78.4 + 9.36*BC + HOST_DELAY |
| 532 | * LS(in) = 802.4 + 75.78*BC + HOST_DELAY |
| 533 | * LS(out) = 802.6 + 74.67*BC + HOST_DELAY |
| 534 | * |
| 535 | * HOST_DELAY == 106 for the c67200 and c67300. |
| 536 | */ |
| 537 | |
| 538 | /* make calculations in 1/100 bit times to maintain resolution */ |
| 539 | if (urbp->ep_data->dev->speed == USB_SPEED_LOW) { |
| 540 | /* Low speed pipe */ |
| 541 | if (usb_pipein(urb->pipe)) |
| 542 | bit_time = 80240 + 7578*len; |
| 543 | else |
| 544 | bit_time = 80260 + 7467*len; |
| 545 | } else { |
| 546 | /* FS pipes */ |
| 547 | if (usb_pipeisoc(urb->pipe)) |
| 548 | bit_time = usb_pipein(urb->pipe) ? 9050 : 7840; |
| 549 | else |
| 550 | bit_time = 11250; |
| 551 | bit_time += 936*len; |
| 552 | } |
| 553 | |
| 554 | /* Scale back down to integer bit times. Use a host delay of 106. |
| 555 | * (this is the only place it is used) */ |
| 556 | bit_time = ((bit_time+50) / 100) + 106; |
| 557 | |
| 558 | if (unlikely(bit_time + c67x00->bandwidth_allocated >= |
| 559 | c67x00->max_frame_bw)) |
| 560 | return -EMSGSIZE; |
| 561 | |
| 562 | if (unlikely(c67x00->next_td_addr + CY_TD_SIZE >= |
| 563 | c67x00->td_base_addr + SIE_TD_SIZE)) |
| 564 | return -EMSGSIZE; |
| 565 | |
| 566 | if (unlikely(c67x00->next_buf_addr + len >= |
| 567 | c67x00->buf_base_addr + SIE_TD_BUF_SIZE)) |
| 568 | return -EMSGSIZE; |
| 569 | |
| 570 | if (periodic) { |
| 571 | if (unlikely(bit_time + c67x00->periodic_bw_allocated >= |
| 572 | MAX_PERIODIC_BW(c67x00->max_frame_bw))) |
| 573 | return -EMSGSIZE; |
| 574 | c67x00->periodic_bw_allocated += bit_time; |
| 575 | } |
| 576 | |
| 577 | c67x00->bandwidth_allocated += bit_time; |
| 578 | return 0; |
| 579 | } |
| 580 | |
| 581 | /* -------------------------------------------------------------------------- */ |
| 582 | |
| 583 | /** |
| 584 | * td_addr and buf_addr must be word aligned |
| 585 | */ |
| 586 | static int c67x00_create_td(struct c67x00_hcd *c67x00, struct urb *urb, |
| 587 | void *data, int len, int pid, int toggle, |
| 588 | unsigned long privdata) |
| 589 | { |
| 590 | struct c67x00_td *td; |
| 591 | struct c67x00_urb_priv *urbp = urb->hcpriv; |
| 592 | const __u8 active_flag = 1, retry_cnt = 1; |
| 593 | __u8 cmd = 0; |
| 594 | int tt = 0; |
| 595 | |
| 596 | if (c67x00_claim_frame_bw(c67x00, urb, len, usb_pipeisoc(urb->pipe) |
| 597 | || usb_pipeint(urb->pipe))) |
| 598 | return -EMSGSIZE; /* Not really an error, but expected */ |
| 599 | |
| 600 | td = kzalloc(sizeof(*td), GFP_ATOMIC); |
| 601 | if (!td) |
| 602 | return -ENOMEM; |
| 603 | |
| 604 | td->pipe = urb->pipe; |
| 605 | td->ep_data = urbp->ep_data; |
| 606 | |
| 607 | if ((td_udev(td)->speed == USB_SPEED_LOW) && |
| 608 | !(c67x00->low_speed_ports & (1 << urbp->port))) |
| 609 | cmd |= PREAMBLE_EN; |
| 610 | |
| 611 | switch (usb_pipetype(td->pipe)) { |
| 612 | case PIPE_ISOCHRONOUS: |
| 613 | tt = TT_ISOCHRONOUS; |
| 614 | cmd |= ISO_EN; |
| 615 | break; |
| 616 | case PIPE_CONTROL: |
| 617 | tt = TT_CONTROL; |
| 618 | break; |
| 619 | case PIPE_BULK: |
| 620 | tt = TT_BULK; |
| 621 | break; |
| 622 | case PIPE_INTERRUPT: |
| 623 | tt = TT_INTERRUPT; |
| 624 | break; |
| 625 | } |
| 626 | |
| 627 | if (toggle) |
| 628 | cmd |= SEQ_SEL; |
| 629 | |
| 630 | cmd |= ARM_EN; |
| 631 | |
| 632 | /* SW part */ |
| 633 | td->td_addr = c67x00->next_td_addr; |
| 634 | c67x00->next_td_addr = c67x00->next_td_addr + CY_TD_SIZE; |
| 635 | |
| 636 | /* HW part */ |
| 637 | td->ly_base_addr = __cpu_to_le16(c67x00->next_buf_addr); |
| 638 | td->port_length = __cpu_to_le16((c67x00->sie->sie_num << 15) | |
| 639 | (urbp->port << 14) | (len & 0x3FF)); |
| 640 | td->pid_ep = ((pid & 0xF) << TD_PIDEP_OFFSET) | |
| 641 | (usb_pipeendpoint(td->pipe) & 0xF); |
| 642 | td->dev_addr = usb_pipedevice(td->pipe) & 0x7F; |
| 643 | td->ctrl_reg = cmd; |
| 644 | td->status = 0; |
| 645 | td->retry_cnt = (tt << TT_OFFSET) | (active_flag << 4) | retry_cnt; |
| 646 | td->residue = 0; |
| 647 | td->next_td_addr = __cpu_to_le16(c67x00->next_td_addr); |
| 648 | |
| 649 | /* SW part */ |
| 650 | td->data = data; |
| 651 | td->urb = urb; |
| 652 | td->privdata = privdata; |
| 653 | |
| 654 | c67x00->next_buf_addr += (len + 1) & ~0x01; /* properly align */ |
| 655 | |
| 656 | list_add_tail(&td->td_list, &c67x00->td_list); |
| 657 | return 0; |
| 658 | } |
| 659 | |
| 660 | static inline void c67x00_release_td(struct c67x00_td *td) |
| 661 | { |
| 662 | list_del_init(&td->td_list); |
| 663 | kfree(td); |
| 664 | } |
| 665 | |
| 666 | /* -------------------------------------------------------------------------- */ |
| 667 | |
| 668 | static int c67x00_add_data_urb(struct c67x00_hcd *c67x00, struct urb *urb) |
| 669 | { |
| 670 | int remaining; |
| 671 | int toggle; |
| 672 | int pid; |
| 673 | int ret = 0; |
| 674 | int maxps; |
| 675 | int need_empty; |
| 676 | |
| 677 | toggle = usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), |
| 678 | usb_pipeout(urb->pipe)); |
| 679 | remaining = urb->transfer_buffer_length - urb->actual_length; |
| 680 | |
| 681 | maxps = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); |
| 682 | |
| 683 | need_empty = (urb->transfer_flags & URB_ZERO_PACKET) && |
| 684 | usb_pipeout(urb->pipe) && !(remaining % maxps); |
| 685 | |
| 686 | while (remaining || need_empty) { |
| 687 | int len; |
| 688 | char *td_buf; |
| 689 | |
| 690 | len = (remaining > maxps) ? maxps : remaining; |
| 691 | if (!len) |
| 692 | need_empty = 0; |
| 693 | |
| 694 | pid = usb_pipeout(urb->pipe) ? USB_PID_OUT : USB_PID_IN; |
| 695 | td_buf = urb->transfer_buffer + urb->transfer_buffer_length - |
| 696 | remaining; |
| 697 | ret = c67x00_create_td(c67x00, urb, td_buf, len, pid, toggle, |
| 698 | DATA_STAGE); |
| 699 | if (ret) |
| 700 | return ret; /* td wasn't created */ |
| 701 | |
| 702 | toggle ^= 1; |
| 703 | remaining -= len; |
| 704 | if (usb_pipecontrol(urb->pipe)) |
| 705 | break; |
| 706 | } |
| 707 | |
| 708 | return 0; |
| 709 | } |
| 710 | |
| 711 | /** |
| 712 | * return 0 in case more bandwidth is available, else errorcode |
| 713 | */ |
| 714 | static int c67x00_add_ctrl_urb(struct c67x00_hcd *c67x00, struct urb *urb) |
| 715 | { |
| 716 | int ret; |
| 717 | int pid; |
| 718 | |
| 719 | switch (urb->interval) { |
| 720 | default: |
| 721 | case SETUP_STAGE: |
| 722 | ret = c67x00_create_td(c67x00, urb, urb->setup_packet, |
| 723 | 8, USB_PID_SETUP, 0, SETUP_STAGE); |
| 724 | if (ret) |
| 725 | return ret; |
| 726 | urb->interval = SETUP_STAGE; |
| 727 | usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), |
| 728 | usb_pipeout(urb->pipe), 1); |
| 729 | break; |
| 730 | case DATA_STAGE: |
| 731 | if (urb->transfer_buffer_length) { |
| 732 | ret = c67x00_add_data_urb(c67x00, urb); |
| 733 | if (ret) |
| 734 | return ret; |
| 735 | break; |
| 736 | } /* else fallthrough */ |
| 737 | case STATUS_STAGE: |
| 738 | pid = !usb_pipeout(urb->pipe) ? USB_PID_OUT : USB_PID_IN; |
| 739 | ret = c67x00_create_td(c67x00, urb, NULL, 0, pid, 1, |
| 740 | STATUS_STAGE); |
| 741 | if (ret) |
| 742 | return ret; |
| 743 | break; |
| 744 | } |
| 745 | |
| 746 | return 0; |
| 747 | } |
| 748 | |
| 749 | /* |
| 750 | * return 0 in case more bandwidth is available, else errorcode |
| 751 | */ |
| 752 | static int c67x00_add_int_urb(struct c67x00_hcd *c67x00, struct urb *urb) |
| 753 | { |
| 754 | struct c67x00_urb_priv *urbp = urb->hcpriv; |
| 755 | |
| 756 | if (frame_after_eq(c67x00->current_frame, urbp->ep_data->next_frame)) { |
| 757 | urbp->ep_data->next_frame = |
| 758 | frame_add(urbp->ep_data->next_frame, urb->interval); |
| 759 | return c67x00_add_data_urb(c67x00, urb); |
| 760 | } |
| 761 | return 0; |
| 762 | } |
| 763 | |
| 764 | static int c67x00_add_iso_urb(struct c67x00_hcd *c67x00, struct urb *urb) |
| 765 | { |
| 766 | struct c67x00_urb_priv *urbp = urb->hcpriv; |
| 767 | |
| 768 | if (frame_after_eq(c67x00->current_frame, urbp->ep_data->next_frame)) { |
| 769 | char *td_buf; |
| 770 | int len, pid, ret; |
| 771 | |
| 772 | BUG_ON(urbp->cnt >= urb->number_of_packets); |
| 773 | |
| 774 | td_buf = urb->transfer_buffer + |
| 775 | urb->iso_frame_desc[urbp->cnt].offset; |
| 776 | len = urb->iso_frame_desc[urbp->cnt].length; |
| 777 | pid = usb_pipeout(urb->pipe) ? USB_PID_OUT : USB_PID_IN; |
| 778 | |
| 779 | ret = c67x00_create_td(c67x00, urb, td_buf, len, pid, 0, |
| 780 | urbp->cnt); |
| 781 | if (ret) { |
| 782 | printk(KERN_DEBUG "create failed: %d\n", ret); |
| 783 | urb->iso_frame_desc[urbp->cnt].actual_length = 0; |
| 784 | urb->iso_frame_desc[urbp->cnt].status = ret; |
| 785 | if (urbp->cnt + 1 == urb->number_of_packets) |
| 786 | c67x00_giveback_urb(c67x00, urb, 0); |
| 787 | } |
| 788 | |
| 789 | urbp->ep_data->next_frame = |
| 790 | frame_add(urbp->ep_data->next_frame, urb->interval); |
| 791 | urbp->cnt++; |
| 792 | } |
| 793 | return 0; |
| 794 | } |
| 795 | |
| 796 | /* -------------------------------------------------------------------------- */ |
| 797 | |
| 798 | static void c67x00_fill_from_list(struct c67x00_hcd *c67x00, int type, |
| 799 | int (*add)(struct c67x00_hcd *, struct urb *)) |
| 800 | { |
| 801 | struct c67x00_ep_data *ep_data; |
| 802 | struct urb *urb; |
| 803 | |
| 804 | /* traverse every endpoint on the list */ |
| 805 | list_for_each_entry(ep_data, &c67x00->list[type], node) { |
| 806 | if (!list_empty(&ep_data->queue)) { |
| 807 | /* and add the first urb */ |
| 808 | /* isochronous transfer rely on this */ |
| 809 | urb = list_entry(ep_data->queue.next, |
| 810 | struct c67x00_urb_priv, |
| 811 | hep_node)->urb; |
| 812 | add(c67x00, urb); |
| 813 | } |
| 814 | } |
| 815 | } |
| 816 | |
| 817 | static void c67x00_fill_frame(struct c67x00_hcd *c67x00) |
| 818 | { |
| 819 | struct c67x00_td *td, *ttd; |
| 820 | |
| 821 | /* Check if we can proceed */ |
| 822 | if (!list_empty(&c67x00->td_list)) { |
| 823 | dev_warn(c67x00_hcd_dev(c67x00), |
| 824 | "TD list not empty! This should not happen!\n"); |
| 825 | list_for_each_entry_safe(td, ttd, &c67x00->td_list, td_list) { |
| 826 | dbg_td(c67x00, td, "Unprocessed td"); |
| 827 | c67x00_release_td(td); |
| 828 | } |
| 829 | } |
| 830 | |
| 831 | /* Reinitialize variables */ |
| 832 | c67x00->bandwidth_allocated = 0; |
| 833 | c67x00->periodic_bw_allocated = 0; |
| 834 | |
| 835 | c67x00->next_td_addr = c67x00->td_base_addr; |
| 836 | c67x00->next_buf_addr = c67x00->buf_base_addr; |
| 837 | |
| 838 | /* Fill the list */ |
| 839 | c67x00_fill_from_list(c67x00, PIPE_ISOCHRONOUS, c67x00_add_iso_urb); |
| 840 | c67x00_fill_from_list(c67x00, PIPE_INTERRUPT, c67x00_add_int_urb); |
| 841 | c67x00_fill_from_list(c67x00, PIPE_CONTROL, c67x00_add_ctrl_urb); |
| 842 | c67x00_fill_from_list(c67x00, PIPE_BULK, c67x00_add_data_urb); |
| 843 | } |
| 844 | |
| 845 | /* -------------------------------------------------------------------------- */ |
| 846 | |
| 847 | /** |
| 848 | * Get TD from C67X00 |
| 849 | */ |
| 850 | static inline void |
| 851 | c67x00_parse_td(struct c67x00_hcd *c67x00, struct c67x00_td *td) |
| 852 | { |
| 853 | c67x00_ll_read_mem_le16(c67x00->sie->dev, |
| 854 | td->td_addr, td, CY_TD_SIZE); |
| 855 | |
| 856 | if (usb_pipein(td->pipe) && td_actual_bytes(td)) |
| 857 | c67x00_ll_read_mem_le16(c67x00->sie->dev, td_ly_base_addr(td), |
| 858 | td->data, td_actual_bytes(td)); |
| 859 | } |
| 860 | |
| 861 | static int c67x00_td_to_error(struct c67x00_hcd *c67x00, struct c67x00_td *td) |
| 862 | { |
| 863 | if (td->status & TD_STATUSMASK_ERR) { |
| 864 | dbg_td(c67x00, td, "ERROR_FLAG"); |
| 865 | return -EILSEQ; |
| 866 | } |
| 867 | if (td->status & TD_STATUSMASK_STALL) { |
| 868 | /* dbg_td(c67x00, td, "STALL"); */ |
| 869 | return -EPIPE; |
| 870 | } |
| 871 | if (td->status & TD_STATUSMASK_TMOUT) { |
| 872 | dbg_td(c67x00, td, "TIMEOUT"); |
| 873 | return -ETIMEDOUT; |
| 874 | } |
| 875 | |
| 876 | return 0; |
| 877 | } |
| 878 | |
| 879 | static inline int c67x00_end_of_data(struct c67x00_td *td) |
| 880 | { |
| 881 | int maxps, need_empty, remaining; |
| 882 | struct urb *urb = td->urb; |
| 883 | int act_bytes; |
| 884 | |
| 885 | act_bytes = td_actual_bytes(td); |
| 886 | |
| 887 | if (unlikely(!act_bytes)) |
| 888 | return 1; /* This was an empty packet */ |
| 889 | |
| 890 | maxps = usb_maxpacket(td_udev(td), td->pipe, usb_pipeout(td->pipe)); |
| 891 | |
| 892 | if (unlikely(act_bytes < maxps)) |
| 893 | return 1; /* Smaller then full packet */ |
| 894 | |
| 895 | remaining = urb->transfer_buffer_length - urb->actual_length; |
| 896 | need_empty = (urb->transfer_flags & URB_ZERO_PACKET) && |
| 897 | usb_pipeout(urb->pipe) && !(remaining % maxps); |
| 898 | |
| 899 | if (unlikely(!remaining && !need_empty)) |
| 900 | return 1; |
| 901 | |
| 902 | return 0; |
| 903 | } |
| 904 | |
| 905 | /* -------------------------------------------------------------------------- */ |
| 906 | |
| 907 | /* Remove all td's from the list which come |
| 908 | * after last_td and are meant for the same pipe. |
| 909 | * This is used when a short packet has occured */ |
| 910 | static inline void c67x00_clear_pipe(struct c67x00_hcd *c67x00, |
| 911 | struct c67x00_td *last_td) |
| 912 | { |
| 913 | struct c67x00_td *td, *tmp; |
| 914 | td = last_td; |
| 915 | tmp = last_td; |
| 916 | while (td->td_list.next != &c67x00->td_list) { |
| 917 | td = list_entry(td->td_list.next, struct c67x00_td, td_list); |
| 918 | if (td->pipe == last_td->pipe) { |
| 919 | c67x00_release_td(td); |
| 920 | td = tmp; |
| 921 | } |
| 922 | tmp = td; |
| 923 | } |
| 924 | } |
| 925 | |
| 926 | /* -------------------------------------------------------------------------- */ |
| 927 | |
| 928 | static void c67x00_handle_successful_td(struct c67x00_hcd *c67x00, |
| 929 | struct c67x00_td *td) |
| 930 | { |
| 931 | struct urb *urb = td->urb; |
| 932 | |
| 933 | if (!urb) |
| 934 | return; |
| 935 | |
| 936 | urb->actual_length += td_actual_bytes(td); |
| 937 | |
| 938 | switch (usb_pipetype(td->pipe)) { |
| 939 | /* isochronous tds are handled separately */ |
| 940 | case PIPE_CONTROL: |
| 941 | switch (td->privdata) { |
| 942 | case SETUP_STAGE: |
| 943 | urb->interval = |
| 944 | urb->transfer_buffer_length ? |
| 945 | DATA_STAGE : STATUS_STAGE; |
| 946 | /* Don't count setup_packet with normal data: */ |
| 947 | urb->actual_length = 0; |
| 948 | break; |
| 949 | |
| 950 | case DATA_STAGE: |
| 951 | if (c67x00_end_of_data(td)) { |
| 952 | urb->interval = STATUS_STAGE; |
| 953 | c67x00_clear_pipe(c67x00, td); |
| 954 | } |
| 955 | break; |
| 956 | |
| 957 | case STATUS_STAGE: |
| 958 | urb->interval = 0; |
| 959 | c67x00_giveback_urb(c67x00, urb, 0); |
| 960 | break; |
| 961 | } |
| 962 | break; |
| 963 | |
| 964 | case PIPE_INTERRUPT: |
| 965 | case PIPE_BULK: |
| 966 | if (unlikely(c67x00_end_of_data(td))) { |
| 967 | c67x00_clear_pipe(c67x00, td); |
| 968 | c67x00_giveback_urb(c67x00, urb, 0); |
| 969 | } |
| 970 | break; |
| 971 | } |
| 972 | } |
| 973 | |
| 974 | static void c67x00_handle_isoc(struct c67x00_hcd *c67x00, struct c67x00_td *td) |
| 975 | { |
| 976 | struct urb *urb = td->urb; |
| 977 | struct c67x00_urb_priv *urbp; |
| 978 | int cnt; |
| 979 | |
| 980 | if (!urb) |
| 981 | return; |
| 982 | |
| 983 | urbp = urb->hcpriv; |
| 984 | cnt = td->privdata; |
| 985 | |
| 986 | if (td->status & TD_ERROR_MASK) |
| 987 | urb->error_count++; |
| 988 | |
| 989 | urb->iso_frame_desc[cnt].actual_length = td_actual_bytes(td); |
| 990 | urb->iso_frame_desc[cnt].status = c67x00_td_to_error(c67x00, td); |
| 991 | if (cnt + 1 == urb->number_of_packets) /* Last packet */ |
| 992 | c67x00_giveback_urb(c67x00, urb, 0); |
| 993 | } |
| 994 | |
| 995 | /* -------------------------------------------------------------------------- */ |
| 996 | |
| 997 | /** |
| 998 | * c67x00_check_td_list - handle tds which have been processed by the c67x00 |
| 999 | * pre: current_td == 0 |
| 1000 | */ |
| 1001 | static inline void c67x00_check_td_list(struct c67x00_hcd *c67x00) |
| 1002 | { |
| 1003 | struct c67x00_td *td, *tmp; |
| 1004 | struct urb *urb; |
| 1005 | int ack_ok; |
| 1006 | int clear_endpoint; |
| 1007 | |
| 1008 | list_for_each_entry_safe(td, tmp, &c67x00->td_list, td_list) { |
| 1009 | /* get the TD */ |
| 1010 | c67x00_parse_td(c67x00, td); |
| 1011 | urb = td->urb; /* urb can be NULL! */ |
| 1012 | ack_ok = 0; |
| 1013 | clear_endpoint = 1; |
| 1014 | |
| 1015 | /* Handle isochronous transfers separately */ |
| 1016 | if (usb_pipeisoc(td->pipe)) { |
| 1017 | clear_endpoint = 0; |
| 1018 | c67x00_handle_isoc(c67x00, td); |
| 1019 | goto cont; |
| 1020 | } |
| 1021 | |
| 1022 | /* When an error occurs, all td's for that pipe go into an |
| 1023 | * inactive state. This state matches successful transfers so |
| 1024 | * we must make sure not to service them. */ |
| 1025 | if (td->status & TD_ERROR_MASK) { |
| 1026 | c67x00_giveback_urb(c67x00, urb, |
| 1027 | c67x00_td_to_error(c67x00, td)); |
| 1028 | goto cont; |
| 1029 | } |
| 1030 | |
| 1031 | if ((td->status & TD_STATUSMASK_NAK) || !td_sequence_ok(td) || |
| 1032 | !td_acked(td)) |
| 1033 | goto cont; |
| 1034 | |
| 1035 | /* Sequence ok and acked, don't need to fix toggle */ |
| 1036 | ack_ok = 1; |
| 1037 | |
| 1038 | if (unlikely(td->status & TD_STATUSMASK_OVF)) { |
| 1039 | if (td_residue(td) & TD_RESIDUE_OVERFLOW) { |
| 1040 | /* Overflow */ |
| 1041 | c67x00_giveback_urb(c67x00, urb, -EOVERFLOW); |
| 1042 | goto cont; |
| 1043 | } |
| 1044 | } |
| 1045 | |
| 1046 | clear_endpoint = 0; |
| 1047 | c67x00_handle_successful_td(c67x00, td); |
| 1048 | |
| 1049 | cont: |
| 1050 | if (clear_endpoint) |
| 1051 | c67x00_clear_pipe(c67x00, td); |
| 1052 | if (ack_ok) |
| 1053 | usb_settoggle(td_udev(td), usb_pipeendpoint(td->pipe), |
| 1054 | usb_pipeout(td->pipe), |
| 1055 | !(td->ctrl_reg & SEQ_SEL)); |
| 1056 | /* next in list could have been removed, due to clear_pipe! */ |
| 1057 | tmp = list_entry(td->td_list.next, typeof(*td), td_list); |
| 1058 | c67x00_release_td(td); |
| 1059 | } |
| 1060 | } |
| 1061 | |
| 1062 | /* -------------------------------------------------------------------------- */ |
| 1063 | |
| 1064 | static inline int c67x00_all_tds_processed(struct c67x00_hcd *c67x00) |
| 1065 | { |
| 1066 | /* If all tds are processed, we can check the previous frame (if |
| 1067 | * there was any) and start our next frame. |
| 1068 | */ |
| 1069 | return !c67x00_ll_husb_get_current_td(c67x00->sie); |
| 1070 | } |
| 1071 | |
| 1072 | /** |
| 1073 | * Send td to C67X00 |
| 1074 | */ |
| 1075 | static void c67x00_send_td(struct c67x00_hcd *c67x00, struct c67x00_td *td) |
| 1076 | { |
| 1077 | int len = td_length(td); |
| 1078 | |
| 1079 | if (len && ((td->pid_ep & TD_PIDEPMASK_PID) != TD_PID_IN)) |
| 1080 | c67x00_ll_write_mem_le16(c67x00->sie->dev, td_ly_base_addr(td), |
| 1081 | td->data, len); |
| 1082 | |
| 1083 | c67x00_ll_write_mem_le16(c67x00->sie->dev, |
| 1084 | td->td_addr, td, CY_TD_SIZE); |
| 1085 | } |
| 1086 | |
| 1087 | static void c67x00_send_frame(struct c67x00_hcd *c67x00) |
| 1088 | { |
| 1089 | struct c67x00_td *td; |
| 1090 | |
| 1091 | if (list_empty(&c67x00->td_list)) |
| 1092 | dev_warn(c67x00_hcd_dev(c67x00), |
| 1093 | "%s: td list should not be empty here!\n", |
| 1094 | __func__); |
| 1095 | |
| 1096 | list_for_each_entry(td, &c67x00->td_list, td_list) { |
| 1097 | if (td->td_list.next == &c67x00->td_list) |
| 1098 | td->next_td_addr = 0; /* Last td in list */ |
| 1099 | |
| 1100 | c67x00_send_td(c67x00, td); |
| 1101 | } |
| 1102 | |
| 1103 | c67x00_ll_husb_set_current_td(c67x00->sie, c67x00->td_base_addr); |
| 1104 | } |
| 1105 | |
| 1106 | /* -------------------------------------------------------------------------- */ |
| 1107 | |
| 1108 | /** |
| 1109 | * c67x00_do_work - Schedulers state machine |
| 1110 | */ |
| 1111 | static void c67x00_do_work(struct c67x00_hcd *c67x00) |
| 1112 | { |
| 1113 | spin_lock(&c67x00->lock); |
| 1114 | /* Make sure all tds are processed */ |
| 1115 | if (!c67x00_all_tds_processed(c67x00)) |
| 1116 | goto out; |
| 1117 | |
| 1118 | c67x00_check_td_list(c67x00); |
| 1119 | |
| 1120 | /* no td's are being processed (current == 0) |
| 1121 | * and all have been "checked" */ |
| 1122 | complete(&c67x00->endpoint_disable); |
| 1123 | |
| 1124 | if (!list_empty(&c67x00->td_list)) |
| 1125 | goto out; |
| 1126 | |
| 1127 | c67x00->current_frame = c67x00_get_current_frame_number(c67x00); |
| 1128 | if (c67x00->current_frame == c67x00->last_frame) |
| 1129 | goto out; /* Don't send tds in same frame */ |
| 1130 | c67x00->last_frame = c67x00->current_frame; |
| 1131 | |
| 1132 | /* If no urbs are scheduled, our work is done */ |
| 1133 | if (!c67x00->urb_count) { |
| 1134 | c67x00_ll_hpi_disable_sofeop(c67x00->sie); |
| 1135 | goto out; |
| 1136 | } |
| 1137 | |
| 1138 | c67x00_fill_frame(c67x00); |
| 1139 | if (!list_empty(&c67x00->td_list)) |
| 1140 | /* TD's have been added to the frame */ |
| 1141 | c67x00_send_frame(c67x00); |
| 1142 | |
| 1143 | out: |
| 1144 | spin_unlock(&c67x00->lock); |
| 1145 | } |
| 1146 | |
| 1147 | /* -------------------------------------------------------------------------- */ |
| 1148 | |
| 1149 | static void c67x00_sched_tasklet(unsigned long __c67x00) |
| 1150 | { |
| 1151 | struct c67x00_hcd *c67x00 = (struct c67x00_hcd *)__c67x00; |
| 1152 | c67x00_do_work(c67x00); |
| 1153 | } |
| 1154 | |
| 1155 | void c67x00_sched_kick(struct c67x00_hcd *c67x00) |
| 1156 | { |
| 1157 | tasklet_hi_schedule(&c67x00->tasklet); |
| 1158 | } |
| 1159 | |
| 1160 | int c67x00_sched_start_scheduler(struct c67x00_hcd *c67x00) |
| 1161 | { |
| 1162 | tasklet_init(&c67x00->tasklet, c67x00_sched_tasklet, |
| 1163 | (unsigned long)c67x00); |
| 1164 | return 0; |
| 1165 | } |
| 1166 | |
| 1167 | void c67x00_sched_stop_scheduler(struct c67x00_hcd *c67x00) |
| 1168 | { |
| 1169 | tasklet_kill(&c67x00->tasklet); |
| 1170 | } |